Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 158/627 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• How to connect the virtual networks of vmware guests running on different hosts?

  - by gyrolf

  In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

  Read the article

• Port forwarding for samba

  - by EternallyGreen

  Alright, here's the setup: Internet - Modem - WRT54G - hubs - winxp workstations & linux smb server. Its basically a home-style distributed internet connection setup, except its at a school. What I want is remote, offsite smb access. I figured I'd need to find out which ports need forwarding and then forward them to the server on the router. I'm told in another question on SF that multiple ports will need forwarding, and it gets somewhat complicated. One of the things I need to know is which ports require forwarding for this, and what complications or vulnerabilities could arise from this. Any additional information you think I should have before doing this would be great. I'm told SMB doesn't support encryption, which is fine. Given I set up authentication/access control, all this means is that once one of my users authenticates and starts downloading data, the unencrypted traffic could be intercepted and read by a MITM, correct? Given that that's the only problem arising from lack of encryption, this is of no concern to me. I suppose that it could also mean a MITM injecting false data into the data stream, eg: user requests file A, MITM intercepts and replaces the contents of file A with some false data. This isn't really an issue either, because my users would know that something was wrong, and its not likely anyone would have incentive to do this anyway. Another thing I've been informed of is Microsoft's poor implementation of SMB, and its crap track record for security. Does this apply if only the client-end is MS? My server is linux.

  Read the article

• special case ssh connection lag

  - by Hersheezy

  Setup We have a DMZ and LAN in our office that are connected to the outside with the following setup: +------+ | |------> LAN (normal office router) |Modem | | |------> DMZ (a single machine) +------+ Our internet account is with Comcast and we have 5 status IPs, one of which points to the single machine in the DMZ. Problem ssh connections initiated ANYWHERE EXCEPT the office LAN are really fast. However, from the LAN, there is about a 5 second delay. WTF?? Extra info The DMZ machine is debian 5. Executing a wget to the DMZ has no lag. When executing the following, everything up to HERE IS WHERE THE LAG IS INCURRED executes immediately. ssh -vvvv [email protected] ... debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: Wrote 16 bytes for a total of 1015 debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug3: Wrote 48 bytes for a total of 1063 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/shopkins/.ssh/id_rsa (0x22440830) debug2: key: /home/shopkins/.ssh/identity ((nil)) debug2: key: /home/shopkins/.ssh/id_dsa ((nil)) debug3: Wrote 64 bytes for a total of 1127` HERE IS WHERE THE LAG IS INCURRED debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/shopkins/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1495 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/shopkins/.ssh/identity debug3: no such identity: /home/shopkins/.ssh/identity debug1: Trying private key: /home/shopkins/.ssh/id_dsa debug3: no such identity: /home/shopkins/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password:

  Read the article

• Mac Mini server (10.6) behind router with FQDN hostname

  - by thechriskelley

  I have a Mac Mini running Mac OS 10.6.6 Server that will be part of a local network, and a static IP from my ISP. I'd like to set up DNS for the Mini with a FQDN as the hostname (example.com) properly. The Mini is behind a router (Apple Airport Extreme) and is given a private, static IP address. I can't assign it the public static IP directly because it's behind a router with DHCP/NAT for other machines on the local net. My end goal here is for services to resolve to the server properly from outside and inside the local network to users via example.com (and subdomains like mail.example.com, www.example.com), which will point to the public static IP assigned to the router. Will DNS work/resolve properly (for mail services and other subdomains) if it has a private ip address, but the necessary services are forwarded properly through NAT? I'm open to any (hopefully better) suggestions, as my current setup doesn't seem like it's the best way. Currently, more hardware or another public static IP is not possible. With the current setup, it seems as though one static IP is not necessary anyway. Thanks in advance for any insight.

  Read the article

• How do I use a self encrypting drive?

  - by Unique_Key

  I recently purchased a Micron RealSSD c400 self encrypting drive, and I am having a few issues when trying to get it recognized by my laptop (HP Elitebook 8440p running Windows 7 x64; also tried on a custom-built desktop). When I try to initialize the drive from disk management, I get a CRC error; also, when attempting to partition it from Windows setup, the program can't create the partitions. I also tried with UBCD, nothing. I assume this is due to drive security, but I haven't been able to find much information about this online; do I need a management software or something? I'm completely stumped here. EDIT As requested, when I try partitioning the device from Windows setup I get a 0x80300024 error; when I try initializing it from disk management, I get a "Data error (cyclic redundancy check)" message, and the event log shows the following under System: Source: VDS Basic Provider, message: unexpected failure. error code 490@01010004 (2x) Source: Virtual Disk Service, message: VDS fails to write boot code on a disk during clean operation. Error code: 80070001@02070008 (1x) Source: Disk, message: The device \Device\Harddisk2\DR2 has a bad block (2x) The security logs show nothing related. Also, when attempting to configure it from UBCD (utility: HDAT2), I get an error along the lines of "can't edit partition information" or something to that tune.

  Read the article

• Debian/Redmine: Upgrade multiple instances at once

  - by Davey

  I have multiple Redmine instances. Let's call them InstanceA and InstanceB. InstanceA and InstanceB share the same Redmine installation on Debian. Suppose I would want to install Redmine 1.3 on both instances, how would I do that? After upgrading the core files I would have to migrate the databases. What I would like to know is: can I migrate all databases in a single action? Normally I would do something like: rake -s db:migrate RAILS_ENV=production X_DEBIAN_SITEID=InstanceA for each instance, but this would get tedious if you have 50+ instances. Thanks in advance! Edit: The README.Debian file that's in the (Debian) Redmine package states: SUPPORTS SETUP AND UPGRADES OF MULTIPLE DATABASE INSTANCES This redmine package is designed to automatically configure database BUT NOT the web server. The default database instance is called "default". A debconf facility is provided for configuring several redmine instances. Use dpkg-reconfigure to define the instances identifiers. But can't figure out what to do with the "debconf facility". Edit2: My environment is a default Debian 6.0 "Squeeze" installation with a default Redmine (aptitude install redmine) installation on a default libapache2-mod-passenger. I have setup two instances with dpkg-reconfigure redmine.

  Read the article

• Workstations cannot see new MS Server 2008 domain, but can access DHCP.

  - by Radix

  The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

  Read the article

• Outside VPN traffic not able to ping site-to-site VPN remote site

  - by Siriss

  we have two ASA 5510s running 8.4 in a site-to-site VPN setup. All internal traffic is working smoothly. Site/Subnet A: 192.100.0.0 - local Site/Subnet B: 192.200.0.0 - remote VPN Users: 192.100.40.0 - assigned by ASA When you VPN into the network, all traffic hits Site A, and everything on subnet A is accessible. Site B however, is completely inaccessible for VPN users. All machines on subnet B, the firewall itself, etc... is not reachable by ping or otherwise. I know I am missing a NAT rule, and in 8.2, it was easy as pie to setup using ASDM, but now I can't get it for the life of me as 8.4 apparently made a lot of changes to NAT rules. I am not too comfortable in the ASA command line, but if there is a command I need to add or if you could direct me where I can add this in 8.4 ASDM I would really appreciate it. I have tired NAT Exempt, Static NAT, Static NAT Policies, etc... I think I tried all the options. I also might have my interfaces confused with the new look at feel of ASDM. Thank you much in advance and I hope I have been thorough enough.

  Read the article

• Multiple VM environment for developing/testing

  - by Hippo

  I was asked to create a setup for automated deployment, configuration, installation/updates of websites. A bunch of small websites will be bundled on one server. If more website will come up a new server will be created... I decided to us chef for this task. All servers will be running Ubuntu at the same version and configuration. The actual question: Everything needs to be tested properly before starting live deployment, so my question is: What is the best virtualisation tool to run multiple (5 - 10) virtual machines on a Ubuntu Laptop? Requirements: easy setup, fast (clone/snapshot of VMs) All VMs should be easily connected to the internet and should be able to communicate to each other (Open-Source / free would be great) So far I looked into: Virtual box is more for Desktop virtualisation, Cloning not possible, every new machine needs to be installed VMware Player Any suggestions? If there are any question about what I am doing please comment on this question, I will answer as soon as possible. This question is not about the actual set up, it is about a nice working environment.

  Read the article

• Enabling Samba Shares Across Subnets

  - by John

  I was curious how I could go about setting up SAMBA so that shares could be seen and used across different subnets. We have some Linux devices that are bound to Active Directory and we would like to have them serve SAMBA shares to clients that will reside in a different subnet than what the servers reside in? Is there any way to do this without needing to setup a WINS server or use legacy NetBIOS methods since the majority of our clients are Windows 7, Windows Server 2003, Windows Server 2008, and Macintosh OS X (10.6 or newer)? EDIT Right now, only clients in the same subnet as the SAMBA server can see the shares. Clients outside of the subnet (i.e. the client subnet) cannot see or connect to the share. The error returned is: The specified network name is no longer available. It does not seem to matter if I use IP, FQDN, or NetBIOS name to try and connect to the share with. We have a common Cisco router handling the inter-subnet routing. Everything else seems to work correctly with this network setup and the device can be pinged from multiple subnets. I also do not believe it to be a firewall type of issue since the rules for this segment are rather lax.

  Read the article

• IIS 6 ASP.NET default handler-mappings and virtual directories

  - by mlauter

  I'm having a problem with setting a default mapping in IIS 6. I want to secure *.HTML files with ASP.NET forms authentication. The problem seems to have something to do with using virtual directories to hold the html files. Here's how it's setup: sample directory tree c:/inetpub/ (nothing in here) d:/web_files/my_web_apps d:/web_files/my_web_apps/app1/ d:/web_files/my_web_apps/app2/ d:/web_files/my_web_apps/html_files/ app1 and app2 both access the same html_files directory, so html_files is set as a virtual directory in the web apps in IIS... sample web directory tree //app1/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) //app2/html_files/ (points to physical directory: d:/web_files/my_web_apps/html_files/) If I put a file called test.html in the root of //app1/ and then add the default mapping to the asp.net dll and setup my security on the root folder with deny="?", then accessing test.html works exactly as expected. If I'm not authenticated, it takes me to the login.aspx page, and if I am authenticated then it displays test.html. If I put the test.html file in the html_files directory I get a totally different behavior. Now the login.aspx page loads and I stuck some code in to check if I was still authenticated: <p>autheticated: <%=User.Identity.IsAuthenticated%></p> I figured it would say false because why else would it bother to load the login page? Nope, it says true - so it knows i'm authenticated, but it won't give me access to the test.html file. I've spent several hours on this and haven't been able to solve it. I'm going to spend some more time on google to see if I've missed something. Fingers crossed.

  Read the article

• Use to host email for a domain name that wasn't our primary domain name

  - by drpcken

  Exchange 2007 on an Server 2003 active directory. My primary domain (MyMainDomain.com) controller also hosts dns and dhcp. I have a secondary domain name (MySecondDomain.net) that my Exchange Server allows emails from. It wasn't a physical domain, just accepted by exchange and setup as the Active Directory user's main smtp and outgoing address. Its MX records point to MyMainDomain.com's public exchange address. I've taken MySecondDomain.net and move the mail boxes to a hosted exchange 2010 environment. MX records now point to this new exchange system and when I send and email OUTSIDE the MyMainDomain.com environment (say gmail) it works and sends to the hosted exchange setup for MySecondDomain.net. however when I send an email from a user on MyMainDomain.com, it goes to the old exchange 2007 server I am hosting internally. I have removed MySecondDomain.net from the allowed domains, removed the DNS zone for MySecondDomain.net, and cleared DNS cache. I was convinced it was my internal dns server but I've cleared the DNS cache. Is there something I'm missing somewhere in exchange 2007? Or is it my domain controller/dns? Sorry if this is confusing. Thank you!

  Read the article

• Windows Server 2008 network speed slow, Xen 3.4.3 HVM ISO

  - by Elliot.Bradshaw

  I've setup a VM running Windows Server 2008 on a host node running Xen 3.4.3-5 and the following kernel: 2.6.18-308.1.1.el5xen #1 SMP Wed Mar 7 05:38:01 EST 2012 i686 i686 i386 GNU/Linux The network speed on the VM is very slow--using the online speed tests I can only get it up to 8-9mbps. The line is 100mbps burstable and the host node has no problem achieving those speeds. If it setup a VM running CentOS, it too has no problems achieving those speeds. I've done some pretty exhaustive troubleshooting, but nothing has helped: New VM installations of Win2k8 do have the same network problem. Upgrading to most recent kernel-xen did not help (2.6.18-308.1.1.el5xen). Upgrading from xen 3.4.0 to xen 3.4.3-5 did not help. Disabling Windows firewall, etc did not help. Changing network card device config from auto negotiation to manually be 100mbps full duplex did not help. Changing the network receive buffer packet size did not help (tried all combos from 64k to 8k). At this point I'm pretty much out of ideas--any help would be appreciated!

  Read the article

• SQL Server Installaion error 0x84B40000

  - by Kurtevich

  I have a problem installing SQL Server 2008 R2. Long time ago I had it installed, and then uninstalled. It was left in "Add/remove programs", but I didn't pay attention on that. I had 2005 installed. And now there is a need to install 2008. I removed 2005 and started installing 2008, but it says that space on C: is not enough. That's when I found out that "Add/remove programs" shows it occupying more than 4 gigabytes, though I used to uninstall it. So I click "Remove", it shows all those many screens and validations, shows that removal completed, but the size of Program Files folder is still more than 4 GB. I removed (from "Add\remove programs" everything that had "SQL Server" in it's name, but that main "SQL Server 2008" item is still there and still 4 GB and uninstalling does nothing. Because installation of SQL Server did not show existing instances, and I don't see any running services related to SQL server (well, almost any, more details in the end), I though that this folder contains just some leftover staff and data and deleted it manually. Then agreed to removing of the item in "Add/remove programs" and everything looks clean. Now every time I try to install SQL Server (even in the minimum configuration), I receive the following error: SQL Server Setup has encountered the following error: The specified credentials that were provided for the SQL Server service are not valid. To continue, provide a valid account and password for the SQL Server service. Error code 0x84B40000. What is this service mentioned here? This error looks like I'm trying to add features to existing server and it can't login. But the setup didn't ask me for any credentials, except one username that couldn't be changed. Here are the services shown that can be related, both disabled and pointing to non-existing executables: SQL Active Directory Helper Service SQL Full-text Filter Daemon Launcher (MSSQLSERVER) I understand that this must be because of my manual deletion, but is there a way to clean it up now?

  Read the article

• Can't add service account to domain group during SQL cluster install

  - by Sam

  I'm installing a 2008 instance on a Server 2003 machine which is already running SQL 2005. I need to set up domain groups for the security setup step: http://msdn.microsoft.com/en-us/library/ms179530.aspx On Windows Server 2003, specify domain groups for SQL Server services. All resource permissions are controlled by domain-level groups that include SQL Server service accounts as group members. Much more info on this here: http://support.microsoft.com/kb/910708 I've had problems with being able to add the windows service accounts to the groups at install time. The security admins had to make my account a domain admin - which they were hesitant to do. The account under which SQL Server Setup is running must have permissions to add accounts to the domain groups. Is there a specific security setting which would allow my account to add accounts to a group? UPDATE: I'm looking for specific instructions. I have a global group called domain\servicegroup - what do I tell the security folks to do. I'd love to figure it out myself, but I don't have access to this stuff.

  Read the article

• Scheduled task does not run on WIndows 2003 server on VMWare unattened, runs fine otherwise

  - by lnm

  Scheduled task does not run on Windows 2003 server on VMWare. The same setup runs fine on standalone server. Test below explains the problem. We really need to run a more complex bat file, but this shows the issue. I have a bat file that copies a file from server A to server B. I use full path name, no drive mapping. Runs fine on server B from command prompt. I created a task that runs this bat file under a domain id with password that is part of administrator group on both servers. Task runs fine from Scheduled task screen, and as a scheduled task as long as somebody is logged into the server. If nobody is logged in, the task does not run. There is no error message in Task Scheduler log, just an entry that the task started, bit no entry for finish or an error code. To add insult to injury, if the task copies a file in the opposite direction, from server B to server A, it runs fine as a scheduled unattended task. If I copy a file from server B to server B, the task also runs fine unattended, I recreated exactly the same setup on a standalone server. No issues at all. I checked obvious things like the task has "run only as logged in" unchecked, domain id has run as a batch job privilege and logon rights, Task Scheduler service runs as a local system, automatic start. Any suggestions?

  Read the article

• Ubuntu 12.04 glusterfs volume failed to mount at boot time

  - by user183394

  I have just setup 7 KVM guests, all running Ubuntu 12.04 LTS 64bit Minimal server to test out glusterfs 3.2.5 from the Ubuntu official repo. Two of them form a mirrored pair (i.e. replica 2), and five of them are clients. I am still new to this file system and would like to gain some "hands-on" experience. The setup was mostly uneventful, until I put in the following into each glusterfs client's /etc/fstab: 192.168.122.120:/testvol /var/local/testvol glusterfs defaults,_netdev 0 0, where 192.168.122.120 is the IP address of the first "glusterfs server". If I issue either a manaul mountall or a mount.glusterfs 192.168.122.120:/testvol /var/local/testvol on CLI, a mount shows that the volume is successfully imported. But once a client is rebooted, after it comes back up, the volume is not mounted! I searched the Internet, and found this article, but since I am not running both client and server on the same node, IMHO it's not strictly applicable. So, as a kludgy "get-around", I put in a sleep 3 && mount.glusterfs 192.168.122.120:/testvol /var/local/testvol into each client node's /etc/rc.local. It seems to be able to get the volume mounted on each node, as far as I can tell. But this is quite ugly, and I would appreciate a hint as to how to resolve this glusterfs-non-boot-time-mounting issue correctly. Note that I used the IP address of the first "glusterfs server" although the /etc/hosts of all nodes have been populated with their hostnames. I figured that the use of IP address is more robust. --Zack

  Read the article

• New monitor connected to HDMI adaptor doesn't show output after booting

  - by Paul

  Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

  Read the article

• How can I fix Office Sharepoint Search service?

  - by unknown (yahoo)

  For some reason, in operations server services, Office Sharepoint Search Service is MISSING! Which means I cant get Shared services working, which in turn I cannot get, and I do not think I have ever got Usage and reporting to see who is visiting my website, counter and with what OS/ browser ETC. I dont think I have ever seen this work in the 2 years trying with sharepoint. So in essense I have two problems, most important SEARCH, second usage reports. When trying to search, all i get is unknown error. Nothing is in my event viewer at all. I have tried http://www.cjvandyk.com/blog/Lists/Posts/Post.aspx?ID=96 , in the comments on that site, on other person reports search is missing entirely and is going to uninstall. Im tired of uninstall sharepoint and resinstalling to fix an odd off issue. I have things setup with Team foundation server that took forever to get work and reinstallation is not my solution. As for usage reporting, this is what microsoft responds to the " Both Windows SharePoint Services Usage logging and Office SharePoint Usage Processing must be enabled to view usage reports. Please contact your administrator to ensure that these services are enabled. " error I cannot do all the steps since SSP needs to be setup which i cant above.

  Read the article

• Hints on diagnosing performance issue in OpenBSD firewall

  - by Tom

  My OpenBSD 4.6 pf firewall has started having really bad performance in the past few weeks. I've isolated the firewall (as opposed to the WAN connection, switch, cable, etc.) as the problem, but need a hint on how to further diagnose or fix the problem. The facts: Normal setup is: DSL Modem - FW Ext. NIC - FW Int. NIC - Switch - Laptop Normal setup described above gives only 25 Kbps! Plugging the laptop straight from the DSL modem gives a 1 MBps connection (full speed, as advertised). Therefore, the DSL connection seems to be OK. Plugging the laptop directly into the firewall's internal NIC (bypassing the switch) also gives only 25 Kbps. Therefore, the switch does not seem to be a problem. I've replaced the ethernet cables, but it didn't help. Here's the weird thing. Reloading the ruleset (/sbin/pfctl -Fa -f /etc/pf.conf) causes the laptop's connection to go up to 1 Mbps (i.e. full speed) for a few minutes before it gradually degrades back down to 25Kbps again. Any ideas on what's wrong or how I could further diagnose the problem?

  Read the article

• Instabilities with Bridged and bonded interfaces

  - by Henry-Nicolas Tourneur

  I did post yesterday to get a working setup with several bridged interfaces used for virtual machines (KVM/libvirt). One of the bridged interface is just using eth3 as its ports while the second one (public traffic) is using an ethernet bonded interface. That setup is working but not all the time ! I can start a download from a vm, then it will stop and freeze! So I don't know if my bridge parameters are correct, could you check the below config ? iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.255 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.255 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.255 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.255 And yes, it also sometimes speaks about martian on the host: kernel: [249146.055172] martian source 10.160.0.17 from 10.160.0.10, on dev vnet2 kernel: [249146.073122] ll header: ff:ff:ff:ff:ff:ff:54:52:00:76:c3:5c:08:06

  Read the article

• Problem linking two Cisco routers with a static route

  - by Chris Kaczor

  I'm trying to link two Cisco routers with a static route and I haven't been able to get it working as expected. Here is the basic setup: Router 1 - WRV210 - 192.168.1.1 - connected to cable modem Router 2 - RV120W - 192.168.2.1 I already have several machines on Router 1 that are working and I want to setup Router 2 with a few other machines on the different subnet. Here is what I've configured: Connected the WAN port on Router 2 to a LAN port on Router 1 Configured Router 1 to give 192.168.1.2 to Router 2 via DHCP Configured Router 1 with a static route (192.168.2.0 mask 255.255.255.0) to 192.168.1.2 using the LAN & Wireless interface Disabled the firewall on Router 2 (since it is covered by Router 1) Configured Router 2 to "Router" mode instead of "NAT" mode Configured Router 2 with a static route (192.168.1.0 mask 255.255.255.0) to 192.168.1.1 using the WAN interface From the research I've done I think that should be enough but things aren't working exactly as expected: Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) A machine on Router 2 can ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) ping 192.168.1.1 and 192.168.1.101 (a machine on router 1) Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) A machine on Router 1 can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) can NOT ping 192.168.2.1 or 192.168.2.101 (a machine on router 2) Router 1 and a machine on Router 1 can ping 192.168.1.2 (Router 2 itself) I'm confused as to why Router 1 cannot talk to the 192.168.2.0/255.255.255.0 subnet. Any help would be greatly appreciated.

  Read the article

• How do I SSH tunnel using PuTTY or SecureCRT through gateway/proxy to development server?

  - by DAE51D

  We have some unix boxes setup in a way that to get to the development box via ssh, you have to ssh into a 'user@jumpoff' box first. There is no direct connection allowed on 'dev' via ssh from anywhere but 'jumpoff'. Furthermore, only key exchange is allowed on both servers. And you always login to the development box as 'build@dev'. It's painful to always do that hopping. I know this can be done with SOCKS or a Tunnel or something... I have setup a FreeBSD VM and I can get things to work awesome using unix ssh tools. Basically all I do is make sure my vm's ~/.ssh/id_rsa.pub key is on both jumpoff and dev and use this ~/.ssh/config file: # Development Server Host ext-dev # this must be a resolvable name for "dev" from Jumpoff Hostname 1.2.3.4 User build IdentityFile ~/.ssh/id_rsa # The Jumpoff Server Host ext Hostname 1.1.1.1 User daevid Port 22 IdentityFile ~/.ssh/id_rsa # This must come below all of the above Host ext-* ProxyCommand ssh ext nc $(echo '%h'|cut -d- -f2-) 22 Then I just simply type "ssh ext-dev" and I'm in like Flynn. The problem is I can't get this same thing to work using either PuTTY or SecureCRT -- and to be honest I've not found any tutorials that really walk me through it. I see many on setting up some kind of proxy tunnel for Firefox, but it doesn't seem to be the same concept. I've been messing with various trial and error most all day and nothing has worked (obviously) and I'm at the end of my ssh knowledge and Google searching. I found this link which seemed to be perfect, but it doesn't work for me. The "Master" connects fine, but the "client" portion doesn't connect. It tells me, the remote system refused the connection. http://www.vandyke.com/support/tips/socksproxy.html I've got the VM, PuTTY and SecureCRT all using the same public/private key pairs to make things consistent and easier to debug. Does anyone have a straight up example of how to do this in Windows?

  Read the article

• DNS Does Not Register at Off-site Locations

  - by Russ Warren

  First of all, let me give you the specifics of our setup: Windows Small Business Server 2008 Domain w/ all applicable updates on the DC The DC does DHCP for the main site The DC does DNS for all sites 3 sites including our headquarters where the DC is located All sites are connected through OpenVPN SSL tunnels terminated by an Untangle box at each site The 2 remote sites us the Untangle box as a DHCP server for their subnet, which assigns the DC as the primary DNS server Collection of Windows XP and Windows 7 workstations connected to the domain Here's the issue: All of the workstations at the main site register with the DNS server on the domain controller fine. As they grab an IP from the DHCP server, it updates the DNS server with the new host record. I have 2 systems (each at different remote sites) that fail to register with the DNS server. I've attempted the following troubleshooting steps: Confirmed the network adapter is using the DC as a DNS server Confirmed 2-way traffic is possible between DC and workstation Verified the "Register with DNS server" setting was checked in the adapter properties Attempted ipconfig /registerdns and received no errors For the time being, I have setup a DHCP reservation for these systems and manually created a host record. This seems to work fine, but I need a solution for any new systems that go out there.

  Read the article

• SQL Server Analysis Services, DNS, AD, Kerberos, Connection Issues

  - by ScaleOvenStove

  Running into a very weird issue. Converting servers to Windows 2008/SQL 2008. Have a server, SERVER_A, brand new, setup with Win2k8,Sql2k8 - works. Have a Server SERVER_B, running Windows2003/SQL2005. I want to migrate from SERVER_B to SERVER_A. I have all db's, cubes, etc setup on SERVER_A and it is mimicking functionality. Since users are using Excel to connect to SSAS, they connection string has SERVER_B in it. What I want to do, is, change DNS on the network to point SERVER_B (by name) at the ip of SERVER_A. I have successfully done this with another server, SERVER_C, but I need to do it with SERVER_B. What I have found is that with SERVER_C, after changing DNS, had to remove SERVER_C from AD and then it worked. I could connect to SERVER_C (DB), SERVER_C (SSAS Default Instance) and SERVER_C (SSAS Named instance) and it all was actually connecting to SERVER_A I tried to do the same with with SERVER_B, and no luck. Changed DNS, removed from AD, and it wouldn't connect. Found out that there were some SPN's in AD set up, so removed those and tried again. I then could connect to SERVER_B (DB), SERVER_B (SSAS Named Instance), but not SERVER_B (SSAS Default Instance). I could connect to SERVER_B (SSAS Default Intance WITH the Port #), but I need to be able to connect without the port number. I am at a loss to as why I can't connect to the default instance without a port #. Not sure if it is SPN's in AD, or another AD issue, or something else. Pretty sure it isnt something on the server (because SERVER_C works!) Any insight or suggestions would be greatly helpful!!

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >