Search Results

Search found 11483 results on 460 pages for 'ip contracts'.

Page 158/460 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

  • Making to the DNS on two different VPNs play nice.

    - by NitroxDM
    Setup: I have two separate networks I need to connect to at the same time. VPN 1 PPTP IP : 192.168.2.0/24 DNS : 192.168.2.32; 192.168.2.34 (Windows 2003) Domain : old.com Forwarder : 192.168.2.1 (Gateway running DNS) DD-WRT VPN 2 OpenVPN using Routing -- I'm going to switch to bridging IP : 192.168.10.0/24 DNS : 192.168.10.10 (Windows 2008) Domain : xyz.dc Forwarder : 192.168.10.1 (Gateway running DNS) ClearOS When I'm connected I would like to resolve host names on both networks without fully qualifying them.

    Read the article

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Xen Server Guest Network configuration?

    - by GeekTantra
    I am trying to install Ubuntu Server as a domU (Guest) on Citrix XenServer. Everything works fine but I am not able to access the internet from the guest. Is there any specific thing that I need to do to configure the network for the Guest. I have two NICs, 1 has an external IP and the other has an internal IP.

    Read the article

  • dlink arp spoofing prevention

    - by Wiploo
    someone can help me understanding arp spoofing prevention on dlink dgs-3100 (ftp://ftp2.dlink.com/PRODUCTS/DGS-3100-48P/REVA/DGS-3100-48P_MANUAL_3.60_EN.PDF). I'd like to protect my gateway MAC/IP from spoofing so I'have tryed to add a rule "IP: 192.168.1.1 MAC: aa-aa-aa-aa-aa-aa" flagging all the port of the switch as untrusted. When I apply the rule I lose connection to all pc attached to the switch. I certanly made some errors, but I can't understand what is wrong. Best Regards

    Read the article

  • Howto monitor traffic between IIS and MSSQL

    - by kockiren
    Hello @all, i try to check how much traffic flows between MSSQL Server and IIS Server in different Locations. There are 1 ipcop in every Location and i download the tcpdump file from one Firewall and search for DST=ipmssql and SRC=ipIIS but i did not find the ip from the Database Server. But there are traffic between both. Any suggestions why i did not find the IP Adress from the MSSQL Server? Is this an configuration failure in IPCop or is the Traffic between ISS and MSSQL so strange :-) Regards Rene

    Read the article

  • Comcast SMC Port Forwarding Issue

    - by Zach Fedora
    I have a Comcast SMCD3G modem/router and I've been having issues getting the port to forward - When I check an online "open-port-checker" it says the port is forwarded/they can see the port on my IP. (1 Static IP is assigned to the modem) But when I try to access port 80 for example on a browser, it times out. Also when I try to remote desktop to the server (Windows Server 2008 R2) it doesn't work, yet canyouseeme.org says it is open. Any ideas as to what the problem could be?

    Read the article

  • Can't port forward ssh on Asus RT-NU56 wireless router

    - by Matt
    I cannot ssh in (using putty) when I use 10.0.1.31 as the address. database server - wired switch part of Asus wireless router - office LAN So basically, we want to ssh in to the database server from our computer on the wired office LAN. Asus router has an ip of 10.0.1.31 and database server has a static IP of 192.168.0.20 I set up port forwarding like this: ssh 22 192.168.0.20 22 BOTH Firewall is turned completely off. Any other settings I'm missing?

    Read the article

  • How can I set up port forwarding for SQL Server 2005?

    - by Manish
    Hello Subject :how to use port forwarding Internet------> Router in my network ------->LocalMachine (Windows 2003) -->Sqlserver2005 How can I access SQL Server through the internet via a router in the local network? My router IP Address is =192.168.1.86; My local machine which is connected to the router Ip Address is= 192.168.1.81 At port No=1433 tell me how to use port forwarding Thanks for help in advance

    Read the article

  • Blocking ICMP outgoing requests only in eth1

    - by Raj
    I am creating a NAT with iptables: Computer A: eth0 (dhcp) + eth1 (static ip 192.168.0.1 - gateway) Computer B: eth1 (static ip 192.168.0.2, using Computer A as gateway) I know how to block ICMP outgoing requests (-A OUTPUT -p icmp --icmp-type echo-request -j DROP), but that would block ICMP requests from Computer A, but not from Computer B (in fact, only for Computer A - Computer B can keep doing those). I tried with the same command, but adding -o eth1, but that does not block at all. Any idea?

    Read the article

  • What Iptables rules need I to forward a windows remote desktop connection?

    - by avastreg
    I have this situation: network mask. 255.255.255.0 router/gateway: Ubuntu server (only command line, no gui) with internal lan ip 192.168.0.2 and a dynamic dns on the external ip Windows pc on 192.168.0.1 with RDP (remote desktop connection) enabled on 3389 I want to forward the RDP service on the external address: how can i do that? What are the iptables rules I need to connect to my Windows pc from the outside world?

    Read the article

  • Routing and arp

    - by adolgarev
    If I have >ip ro 192.168.14.0/24 dev eth0 another host can obtain my mac address. But if I flush routing info: >ip ro flush table main arp resolution doesn't work. Broadcast packets "Who has 192.168.14.149" reach eth0 but OS (Linux) doesn't respond despite eth0 has address 192.168.14.149. What connection exists between routing and arp resolution?

    Read the article

  • Why would an iPod Touch and PS3 respond to netdiscover as 0.0.0.0?

    - by Iszi
    Only slightly related to this question, because it was discovered in the same scan: Can someone explain how this happened? When running netdiscover on my home network, my iPod Touch (identified by DHCP-reserved IP address and MAC address) responded to both its own IP address on our 10.x.x.x subnet and to 0.0.0.0 also. Why would this have happened? EDIT: After letting netdiscover run awhile longer, it seems one of the PS3s on the network is also answering to 0.0.0.0 - why is this?

    Read the article

  • How to run open dns on a network

    - by user37652
    I need to be enlightened in this topic. First, is it possible to run open dns on a network so that you won't have to install the open dns updater to update the ip address of those machines with dynamic ip address. Second, how do I set it up. Can I set it up on the router?

    Read the article

  • PPTP pass through on Cisco ASA 5505 (8.2)

    - by ITGuy24
    Is it possible to setup PPTP VPN traffic (clients outside and server inside) to passthrough a Cisco ASA 5505 if the outside IP address is also being used for PAT? The Cisco examples forward all NAT traffic from the outside to the inside VPN server. I only have one IP available currently and need PAT.

    Read the article

  • How to find username on remote computer?

    - by Neil
    I have the IP addresses of some computers on my network. Is there any command line tool like PsExec, which can take the IP Address as input and find out the username of the currently logged in user? I can install stuff on my workstation, but not the others. I can also run Metasploit / NMap / any other such program on my workstation.

    Read the article

  • ESXi configuration

    - by Simone Falcini
    I just bought a dedicated server on online.net I have a public and a private ip. I installed esxi from their panel and I can connect successfully with my vsphere client. The problem is this: I want to create some instances and I want to give them different private ips. I also want to create some NAT rules to forward all users coming to my public ip port 80 to a specific instance. How can I do that? Thanks

    Read the article

  • Trunking between Juniper Ex3300 with Cisco Router

    - by danijuntak
    Hy Experts, Please tell how to create trunking with Juniper and Cisco. Cisco 2950 Juniper EX3300 Cisco 2621 I create VLAN 100,VLAN 200, VLAN 300 I have create trunk on juniper switch with : set interfaces ge-0/0/2 unit 0 family ethernet-switching vlan members root@switch# set interfaces ge-0/0/23 unit 0 family ethernet-switching port-mode trunk Now I want to telnet Juniper Switch from PC, but I don't know how to give IP address to Juniper switch and how to assign IP to vlan on Juniper switch.

    Read the article

  • Why does localhost and 127.0.0.1 resolve to different locations on Mac OSC 10.8?

    - by Greg Wiley
    I set up a local server without MAMP, for various reasons. I used this tutorial: http://coolestguyplanettech.com/downtown/install-and-configure-apache-mysql-php-and-phpmyadmin-osx-108-mountain-lion I'm just wondering why the local IP and localhost resolve to two different locations. Right now the IP resolves to a Virtual Host I set up and the localhost resolves to the DocumentRoot established by httpd.conf

    Read the article

  • Port forwarding using a BT Home Hub 2.0 (Supplied to new BT Infinity Customers in the UK)

    - by Jasarien
    I don't usually have trouble with port forwarding, I've been able to do it successfully on a number of different routers, including Linksys, Belkin, Netgear and Apple (Time Capsule / Airport Extreme). So I'm quite confused here. I had been using my Apple Time Capsule as my router for a few years now, with several port mappings all working fine. But it died recently, so I've had to resort to using the BT Home Hub 2.0 that was supplied with my BT Infinity broadband subscription. The forwarding interface for the Home Hub is simplified for the most part, allowing you to select an application or game and assign it to a particular computer on the network which you choose from a list that the Home Hub has 'discovered'. My Mac Pro has a manually assigned static IP 192.168.1.4 and my router is static at 192.168.1. I have chosen SSH from the list of applications and assigned it to my Mac Pro (the only computer in the list currently). The Home Hub also has a feature to keep a DNS service updated, and I have set it to keep my external IP address updated on my hostname. This is how I had it setup in the past with other routers and not had trouble before. I am able to ping my hostname (and external IP) from outside the network and get a response. But when I try to connect using SSH, the connection times out. The Home Hub also has "Firewall settings". The currently selected setting is: Default: Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed. But I've tried changing it to: Disabled: All traffic is allowed to pass through your BT Home Hub to your devices. Note: you’ll still need to use the games and application sharing feature to make sure that certain applications work properly. And the connection still times out... So frustrating. The OS X firewall on my Mac is disabled, so I don't think that's in the way. I have tried setting the port forwarding manually, instead of relying on the preset "SSH" option (incase it's not using the port I expect). So I set up my own "application" (as the Home Hub calls it) and forwarded external port 22 TCP to internal port 22 TCP to 192.168.1.4 - but that just gives the same result - unable to connect. Next, with the router's firewall disabled and OS X's firewall disabled, I ran the Shields Up test (https://www.grc.com/x/ne.dll?bh0bkyd2) and the result was that all my service ports (0 - 1055) are in 'Stealth' mode. I.e. nothing even exists at my IP as far as any outsider is concerned... Strange. The only thing that seems to work is setting my Mac Pro as the DMZ - which I don't want to do for obvious reasons. Any help with this would be extremely appreciated, thanks.

    Read the article

  • UCEProtect Level 3 - Emails land in SPAM

    - by preetam
    I am not sure how i can have remove the IP from UCEPROTECT Level 3. Or a way in which i can send emails without them landing into spam. The IP which i have used has only sent emails to the users which they have asked for and naturally not listed for spamming. But the Service provider is. Any suggestion?, as i don't see the institution for which the setup has been made would change the ISP at this stage. Thank You

    Read the article

  • Switching Servers, SSL domain, one vps?

    - by ThomasReggi
    Feeding off of this post. I have a domain with Dreamhost and i've purchased SSL certificate for it. I am moving over the server files to Linode but and setting the DNS in dreamhost to point over. Linode provides a ip but it's not dedicated. What is going to happen to SSL on that dreamhost IP when I switch over the DNS to linode? I have one virtual host can I host multiple domains while using SSL for one?

    Read the article

  • Use same url externally as internally

    - by Nifle
    If I have a web server on my home network I can connect to it from work with http://my.external.ip/whatever/ (assuming NAT and forwarding). Naturally I have a bookmark in my browser that points to http://my.external.ip/whatever/ however when I use that bookmark on my home computer (also behind NAT) the link does not work because my firewall blocks it. (firewall is a old'ish Dlink) What is the best way to fix this issue?

    Read the article

  • What ports does Management Studio use to connect to SQL Server (2005)

    - by Martin
    I have SQL Server 2005 operating on a remotely hosted server and wish to access it from my own machine using management studio The firewall on the remote server is allready setup to allow all traffic from my external IP - and that works great. However I have a load balancing router that has a second line attached to it - unfortunatly the second line has a dynamic external IP. I need to therefore set up a rule in the router to always send data from Management studio on the first line - but I need to know the port numbers. Can you advise?

    Read the article

  • ssh connectivity issue

    - by achal tomar
    I have a CentOS 5.5 server hosted in a remote data center. I usually access this server from a Red Hat Enterprise Linux 5 server using the ssh command. Now my organization has implemented a proxy server, this is not allowing me to connect to the VPS server. I see the following error using the command root@<ip address>:-: ssh: connect to host <ip address> PORT 22: connection refused. Can anybody help me with this issue?

    Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >