Search Results

Search found 15386 results on 616 pages for 'usb port'.

Page 158/616 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• Wired to wireless bridge in Linux

  - by adrianmcmenamin

  I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

  Read the article

• trouble connecting ups

  - by Jure1873

  I've got a riello UPS connected to my server through USB. The output from dmesg is: [1362998.520035] usb 2-2: new low speed USB device using uhci_hcd and address 7 [938715.763270] usb 2-2: configuration #1 chosen from 1 choice [1363008.726243] input: Ups Manufacturing RS232-USB converter as /class/input/input7 [1363008.749408] input: USB HID v1.00 Gamepad [Ups Manufacturing RS232-USB converter] on usb-0000:00:1d.0-2 Now the program for controlling the UPS is expecting me to input the device path (/dev/ttyUSB0), but it doesn't get created. What is /class/input/input7 and where is it? Do i have to install additional drivers?

  Read the article

• Unable to install USB drivers for android

  - by Dave

  I'm running Win XP 64bit and am connecting a Motocliq to my computer. The device is recognized by windows and shows up in the device manager (Motorola ADB Interface), however when I try to install drivers (manually, from the usb_driver revision 3 provided by Android) it fails giving the error "The hardware was not installed because the wizard cannot find the necessary software." Does anyone else have experience installing this drivers on XP64bit/Motocliq?

  Read the article

• How does an operating system accomodate for USB 2.0's inability to provide interrrupts for connected

  - by user354822

  That's it. ffffffffffff

  Read the article

• How do I start nginx on port 80 at OS X login?

  - by Bryson

  I installed Nginx using homebrew and after completing the installation the following message was displayed: In the interest of allowing you to run `nginx` without `sudo`, the default port is set to localhost:8080. If you want to host pages on your local machine to the public, you should change that to localhost:80, and run `sudo nginx`. You'll need to turn off any other web servers running port 80, of course. You can start nginx automatically on login running as your user with: mkdir -p ~/Library/LaunchAgents cp #{prefix}/org.nginx.nginx.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/org.nginx.nginx.plist Though note that if running as your user, the launch agent will fail if you try to use a port below 1024 (such as http's default of 80.) But I want Nginx, on port 80, running at login and I don't want to have to open terminal and type in sudo nginx to do it. I want it to load from a plist file like Redis and PostgreSQL do. I moved the plist to /Library/LaunchAgents/ from the user folder equivalent and changed its ownership, also tried setting the user directive in the nginx.conf file and still the same error message in Console.app: nginx: [emerg] bind() to 0.0.0.0:80 failed (13: Permission denied) (along with another message telling me that since nginx was being run without super-user privileges, the user directive was being ignored)

  Read the article

• Squid: caching *.swf with variables

  - by stfn

  I'd recently upgraded my Ubuntu 11.10 x64 server to 12.04. In this process Squid was updated from 2.7 to 3.1. Squid 3.1 has many different options witch broke my setup. So I completely removed squid 2.7 and 3.1 and started from scratch. Everything is now working as before except for 1 thing: caching of .swf files with ?/variables. Squid 3 sees a ? as dynamic content and does not cache it. For example, Squid 2.7 was caching the .swf file at http://ninjakiwi.com/Games/Tower-Defense/Play/Bloons-Tower-Defense-5.html and 3.1 is not. <object id="mov" name="movn" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="800" height="620"> <param name="movie" value="http://www.ninjakiwifiles.com/Games/gameswfs/btd5.swf?v=160512-2"> <param name="allowscriptaccess" value="always"> <param name="bgcolor" value="#000000"> <param name="flashvars" value="file=http://www.ninjakiwifiles.com/Games/gameswfs/btd5-dat.swf?v=280512"> <p>Get Flash play Ninja Kiwi games.</p> </object> It is because of the "?v=160512-2" and "?v=280512" part. This line should be responsible for that: refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 But disabling it still doesn't cache the .swf files. How do I configure Squid 3.1 to cache those files? My current config is: acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT acl localnet src 192.168.2.0-192.168.2.255 acl localnet src 192.168.3.0-192.168.3.255 http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access allow localnet http_access deny all http_port 3128 cache_dir ufs /var/spool/squid 10240 16 256 maximum_object_size 100 MB coredump_dir /var/spool/squid3 refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i \.(gif|png|jpg|jpeg|ico)$ 10080 90% 43200 override-expire ignore-no-cache ignore-no-store ignore-private refresh_pattern -i \.(iso|avi|wav|mp3|mp4|mpeg|swf|flv|x-flv)$ 43200 90% 432000 override-expire ignore-no-cache ignore-no-store ignore-private refresh_pattern -i \.(deb|rpm|exe|zip|tar|tgz|ram|rar|bin|ppt|doc|tiff)$ 10080 90% 43200 override-expire ignore-no-cache ignore-no-store ignore-private refresh_pattern -i \.index.(html|htm)$ 0 40% 10080 refresh_pattern -i \.(html|htm|css|js)$ 1440 40% 40320 refresh_pattern Packages\.bz2$ 0 20% 4320 refresh-ims refresh_pattern Sources\.bz2$ 0 20% 4320 refresh-ims refresh_pattern Release\.gpg$ 0 20% 4320 refresh-ims refresh_pattern Release$ 0 20% 4320 refresh-ims refresh_pattern . 0 40% 40320 cache_effective_user proxy cache_effective_group proxy

  Read the article

• What causes a switch port to receive data not destined for it?

  - by user1693454

  We are having an intermittent fault which is effecting one of our control systems on one of our HP Procurve switches. For some reason, this PLC (10mbit port - 192.168.6.56) which is attached directly to the HP Switch intermittantly start's receiving data which is not destined for it. The data is being sent from a Thecus NAS with latest firmware (192.168.6.218) to a physical IBM Server running Win2003R2 and SAP (192.168.6.225). The problem does not just send to this server, it has been to other physical servers in the past too, but always from the Thecus NAS. I am using a monitor port to wireshark what is going in/out of the PLC - normally there would be about 1mb in/out per 2 or 3 minutes - only a server asking the state of the coils. When the problem occurs, there is a flood of data being put onto the PLC line - in this captured instance, about 67mb in less than a minute. Due to this, there is no way that the PLC can be queried as the port is effectively DOSed, in turn killing part of our factory. I know that having Production on the same vlan as IT is not a good idea - I agree, however it cannot be changed at the moment (will have to wait 3 months), as well as the problem has only started happening in the last 3 months. Here is a screen cap of one of the packets being sent from the Thecus NAS which was captured from the PLC port on the HP Switch: And there are over 700 of these in this one 1024kb file. If anyone has any idea on what could be going on, some help would be greatly appreciated. If you need to know anything more, let me know! Cheers!

  Read the article

• Perl cron job stays running

  - by Dylan

  I'm currently using a cron job to have a Perl script that tells my Arduino to cycle my aquaponics system and all is well, except the Perl script doesn't die as intended. Here is my cron job: */15 * * * * /home/dburke/scripts/hal/bin/main.pl cycle And below is my Perl script: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $pid = fork(); my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { if ($args eq "cycle") { my $stop = 0; sleep(1); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); while ($stop == 0) { sleep(2); } die "Done."; } else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } } Why wouldn't it die from the statement die "Done.";? It runs fine from the command line and also interprets the 'cycle' argument fine. When it runs in cron it runs fine, however, the process never dies and while each process doesn't continue to cycle the system it does seem to be looping in some way due to the fact that it ups my system load very quickly. If you'd like more information, just ask. EDIT: I have changed to code to: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C if ($args eq "cycle") { open (LOG, '>>log.txt'); print LOG "Cycle started.\n"; my $stop = 0; sleep(2); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; print LOG "Alarm is being set.\n"; alarm (420); print LOG "Alarm is set.\n"; while ($stop == 0) { print LOG "In while-sleep loop.\n"; sleep(2); } print LOG "The loop has been escaped.\n"; die "Done."; print LOG "No one should ever see this."; } else { my $pid = fork(); $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } }

  Read the article

• Java Socket Closes After Connection?

  - by Matthew

  Why does this port/socket close once a connection has been made by a client? package app; import java.io.*; import java.net.*; public class socketServer { public static void main(String[] args) { int port = 3333; boolean socketBindedToPort = false; try { ServerSocket ServerSocketPort = new ServerSocket(port); System.out.println("SocketServer Set Up on Port: " + port); socketBindedToPort = true; if(socketBindedToPort == true) { Socket clientSocket = null; try { clientSocket = ServerSocketPort.accept();//This method blocks until a socket connection has been made to this port. System.out.println("Waiting for client connection on port:" + port); /** THE CLIENT HAS MADE A CONNECTION **/ System.out.println("CLIENT IS CONENCTED"); } catch (IOException e) { System.out.println("Accept failed: " + port); System.exit(-1); } } else { System.out.println("Socket did not bind to the port:" + port); } } catch(IOException e) { System.out.println("Could not listen on port: " + port); System.exit(-1); } } }

  Read the article

• How can find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• How can I find the USB wireless adapter into the dmesg log file?

  - by AndreaNobili

  I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

  Read the article

• Windows 7 DVD doesn't boot up, neither does USB. :'(

  - by Manan Shah

  My problem is that i'm not able to install windows 7. Been trying to install this since past 1 week. The methods i've tried are: I have a windows 7 bootable DVD which doesnt boot up. (I've set BIOS to boot from DVD ROM first but it just won't boot from the DVD). Tried to install Windows 7 from the same DVD to a friend's PC and it worked. So the DVD has no issues. I tried to run 'Setup.exe' from within the DVD. The two options pop-up 'Check compatibility' and 'Install now'. On clicking install now, after sometime, an error is encountered with the message 'Windows was unable to create a required installation folder' error code:0x8007000D. I am running Windows XP Professional and there's only one user on the PC which is the Admin, so i do not know why is the setup not getting permissions. I've also uninstalled my antivirus, CD burning software, disabled firewall and disconnected all other devices, but its still the same. I tried to install it from a USB device by making it bootable but that too doesnt work. (Yes the mobo supports booting from the USB). The problem is that XP does not recognize a 'USB' device on boot. Rather it shows this USB stick as a removable 'Hard Drive'. Furthermore, i changed the order of Hard Drive boot to boot from this removable Hard Drive first, it still boots my existing OS. Is there anything else that can be done? Any help would be greatly appreciated. :) Please ask if any other information is required, this post is becomimg increasingly long to add any other details. PS: I want to dual boot windows 7 with my existing XP, but that would be after i manage to run the windows 7 setup in the first place. PPS: Please bare with any 'not-so-technical' terms, i am a beginner with this. Again, thank you for taking the time and trying to help, really appreciate it. :)

  Read the article

• Are spurious TCP connections on port 53 a problem?

  - by Darren Greaves

  I run a server which amongst other things uses tinydns for DNS and axfrdns for handling transfer requests from our secondary DNS (another system). I understand that tinydns uses port 53 on UDP and axfrdns uses port 53 on TCP. I've configured axfrdns to only allow connections from my agreed secondary host. I run logcheck to monitor my logs and every day I see spurious connections on port 53 (TCP) from seemingly random hosts. They usually turn out to be from ADSL connections. My question is; are these innocent requests or a security risk? I am happy to block repeat offenders using iptables but don't want to block innocent users of one of the websites I host. Thanks, Darren.

  Read the article

• Using the option port on my Watchguard Firebox as a 2nd gateway exit point?

  - by Donovan

  I'm working on a network project in witch I have to design our network to provide two different exit points. The points are differentiated by the path through the corporate network. One of them travels through some monitoring hardware the other does not. We have a Watchguard Firebox in use as our gateway. Currently the network side provides the unmonitored exit point. I was wondering if i hooked the option port to our lan at a point that would force traffic through the monitored path, would it cause any problems? Access to the unmonitored gateway port would be restricted by ip. That would force all others not authorized to point to the monitored gateway port. I thought with the above design i might be able to get away with not having to buy another firebox to achieve the design I want. Thanks, D

  Read the article

• Can I set up a COM Port that Connects via TCP/IP?

  - by Kristopher Johnson

  I have an RS232 device connected to a Digi PortServer on my network. I can telnet to the Digi's IP and port number to communicate with that RS232 device. I have a Windows application that knows how to talk to the device, but it wants to connect directly to an RS232 port. So, my question: Is there some way to set up a COM port so that when this application connects to it, it goes through the network to the Digi to communicate with the device? I have run across the utility TCP-Com, which seems like it might be a solution. Is this the best option?

  Read the article

• Linksys EA3500 : use WAN port as WAN + LAN possible?

  - by Dough

  I'm waiting for deliver of a Linksys EA3500 router. I was wondering if it was possible to get the WAN port act as normal WAN port (Internet IP) + LAN switch ? My problem is that my Internet box is in a room with NAS and PC, and the router will be in another room with TV, PS3 and PC. The Internet box have a 4 port Gigabit switch so one cable will plug from there to the router's WAN in the other room. The router will get the Internet IP from the Internet box, but will it be possible to have private network through this link too ? I could have a first network between the Internet box and the router, and another network form router and devices but that will do double NAT for nothing... Thanks for reading me and your help !

  Read the article

• How do http proxies determine https traffic with a single port?

  - by badunk

  If a proxy receives the tcp packet, then the destination ip address and port are that of the proxy. In that case, I imagine the only way a proxy can still resolve the intended destination is either through routing the source ip address/port or through the host field in the http header. Is this correct? In both Fiddler and Charles http proxies, I noticed that the tool accepts both http and https connections through a single port that you can specify. What do these tools do to tell the difference between the two types of connections?

  Read the article

• Hosting a web site at home: ISP Blocking port 80?

  - by tombull89

  Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

  Read the article

• How do I make a privileged port non-privileged in Redhat 5?

  - by Jason Thompson

  So I have a RedHat 5 box that I'm wanting to run an application that I wrote that implements SLP. SLP uses port 427 for answering service queries. My understanding is that ports below 1024 are "privileged" and thus cannot be bound to by anyone that's not root. I cannot run this application as root as it is launched via tomcat. One creative solution I really like was simply writing an iptables rule to route the privileged port to a non-privileged. In my proof of concept tests, this works wonderfully. Unfortunately, it would be greatly (and understandably) desired by the powers if my application did not require screwing around with iptables upon installation. So I heard a rumor and cannot find anything to verify this that there was some sort of command or parameter that could be set to make any port I want be non-privileged. Is this true? If so, how is this done? Thanks!

  Read the article

• How to access remotly to a mysql server?

  - by ÉricP

  Hi, I'm trying to access my remote mysql server from my own computer. I uncommented: bind-address = 80.10.65.45 I added 80.10.65.45 as a server in privilege root 80.10.65.45 yes ALL PRIVILEGES yes I'm using Sequel Pro on MacosX to connect via SSH here is the debug log: debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:58517 forwarded to remote address 127.0.0.1:3306 debug1: Local forwarding listening on ::1 port 58517. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 58517. debug1: channel 1: new [port listener] debug1: Entering interactive session. debug1: Connection to port 58517 forwarding to 127.0.0.1 port 3306 requested. debug1: channel 2: new [direct-tcpip] channel 2: open failed: connect failed: Connection refused debug1: channel 2: free: direct-tcpip: listening port 58517 for 127.0.0.1 port 3306, connect from 127.0.0.1 port 58519, nchannels 3

  Read the article

• outlook iptables configuration [update]

  - by mediaexpert

  I've a Debian mail server, but only the outlook users can't be able to download the emails. I've seen a lot of post about some kind of forwarding port configuration, I've tried some commands, but I don't be able to solve this problem, please help me. [LAST UPDATE] I find a lot of TIME WAIT on ipv6 netstat tcp6 0 0 my.mailserver.it:imap2 200-62-245-188.ip2:17060 TIME_WAIT - below some config files: pop3d I think the problem was here ##NAME: POP3AUTH:1 # # To advertise the SASL capability, per RFC 2449, uncomment the POP3AUTH # variable: # # POP3AUTH="LOGIN" # # If you have configured the CRAM-MD5, CRAM-SHA1 or CRAM-SHA256, set POP3AUTH # to something like this: # # POP3AUTH="LOGIN CRAM-MD5 CRAM-SHA1" POP3AUTH="" ##NAME: POP3AUTH_ORIG:1 # # For use by webadmin POP3AUTH_ORIG="PLAIN LOGIN CRAM-MD5 CRAM-SHA1 CRAM-SHA256" ##NAME: POP3AUTH_TLS:1 # # To also advertise SASL PLAIN if SSL is enabled, uncomment the # POP3AUTH_TLS environment variable: # # POP3AUTH_TLS="LOGIN PLAIN" POP3_TLS_REQUIRED = 0 POP3AUTH_TLS="" ##NAME: POP3AUTH_TLS_ORIG:0 # # For use by webadmin POP3AUTH_TLS_ORIG="LOGIN PLAIN" ##NAME: POP3_PROXY:0 # # Enable proxying. See README.proxy # # For use by webadmin POP3AUTH_TLS_ORIG="LOGIN PLAIN" ##NAME: POP3_PROXY:0 # # Enable proxying. See README.proxy POP3_PROXY=0 ##NAME: PROXY_HOSTNAME:0 # # Override value from gethostname() when checking if a proxy connection is # required. # PROXY_HOSTNAME= ##NAME: PORT:1 ##NAME: PROXY_HOSTNAME:0 # # Override value from gethostname() when checking if a proxy connection is # required. # PROXY_HOSTNAME= ##NAME: PORT:1 # # Port to listen on for connections. The default is port 110. # # Multiple port numbers can be separated by commas. When multiple port # numbers are used it is possibly to select a specific IP address for a # given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" # accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 # The ADDRESS setting is a default for ports that do not have a specified # IP address. # Port to listen on for connections. The default is port 110. # # Multiple port numbers can be separated by commas. When multiple port # numbers are used it is possibly to select a specific IP address for a # given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900" # accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1 # The ADDRESS setting is a default for ports that do not have a specified # IP address. PORT=110 ##NAME: ADDRESS:0 # # IP address to listen on. 0 means all IP addresses. ADDRESS=0 ##NAME: TCPDOPTS:0 # ##NAME: ADDRESS:0 # # IP address to listen on. 0 means all IP addresses. ADDRESS=0 ##NAME: TCPDOPTS:0 # # Other couriertcpd(1) options. The following defaults should be fine. # TCPDOPTS="-nodnslookup -noidentlookup" ##NAME: LOGGEROPTS:0 # # courierlogger(1) options. # LOGGEROPTS="-name=pop3d" ##NAME: DEFDOMAIN:0 # # Optional default domain. If the username does not contain the # first character of DEFDOMAIN, then it is appended to the username. # If DEFDOMAIN and DOMAINSEP are both set, then DEFDOMAIN is appended # only if the username does not contain any character from DOMAINSEP. # You can set different default domains based on the the interface IP # address using the -access and -accesslocal options of couriertcpd(1). DEFDOMAIN="@interzone.it" ##NAME: POP3DSTART:0 # # POP3DSTART is not referenced anywhere in the standard Courier programs # or scripts. Rather, this is a convenient flag to be read by your system # startup script in /etc/rc.d, like this: # # . /etc/courier/pop3d DEFDOMAIN="@mydomain.com" ##NAME: POP3DSTART:0 # # POP3DSTART is not referenced anywhere in the standard Courier programs # or scripts. Rather, this is a convenient flag to be read by your system # startup script in /etc/rc.d, like this: # # . /etc/courier/pop3d # case x$POP3DSTART in # x[yY]*) # /usr/lib/courier/pop3d.rc start # ;; # esac # # The default setting is going to be NO, until Courier is shipped by default # with enough platforms so that people get annoyed with having to flip it to # YES every time. # x[yY]*) # /usr/lib/courier/pop3d.rc start # ;; # esac # # The default setting is going to be NO, until Courier is shipped by default # with enough platforms so that people get annoyed with having to flip it to # YES every time. POP3DSTART=YES ##NAME: MAILDIRPATH:0 # # MAILDIRPATH - directory name of the maildir directory. # MAILDIRPATH=.maildir iptables Chain INPUT (policy DROP 20 packets, 1016 bytes) pkts bytes target prot opt in out source destination 60833 16M ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 state NEW,ESTABLISHED 18970 971K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:110 state NEW,ESTABLISHED Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 192.168.1.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 pop3d.cnf RANDFILE = /usr/lib...pop3d.rand [req] default_bits = 1024 encrypt_key = yes distinguidhed_name = req_dn x509_extensions = cert_type prompt = no [req_dn] C=US ST=NY L= New York O=Courier Mail Server OU=Automatically-generated POP3 SSL key CN=localhost [email protected] [cert_type] nsCertType = server

  Read the article

• Multiple SSL domains on the same IP address and same port?

  - by John

  This is a Canonical Question about Hosting multiple SSL websites on the same IP. I was under the impression that each SSL Certificate required it's own unique IP Address/Port combination. But the answer to a previous question I posted is at odds with this claim. Using information from that Question, I was able to get multiple SSL certificates to work on the same IP address and on port 443. I am very confused as to why this works given the assumption above and reinforced by others that each SSL domain website on the same server requires its own IP/Port. I am suspicious that I did something wrong. Can multiple SSL Certificates be used this way?

  Read the article

• How to run multiple Nginx instances on different port...

  - by Edvinas

  Hi, I would like to have several Nginx instances running on my server on separate ports (for example one user runs Nginx on port 2345, and another user on port 2346). So far, I have been successful in compiling and running the server on their designated ports. However, I am running into a weird issue: If i visit domain1.com:2345 or domain2.com:2346 I get the correct (200) response but if I visit domain1.com or domain2.com (without specifying the port) I get no response at all. Any help/clues in figuring out how to set this up would be highly appreciated.

  Read the article

• How to Reuse Your Old Wi-Fi Router as a Network Switch

  - by Jason Fitzpatrick

  Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

  Read the article

• Debian squeeze keyboard and touchpad not working / detected on laptop

  - by Esa

  They work before gdm3 starts. a connected mouse also stops working, but functions after removal and re-plug. no xorg.conf. log doesn't show any loading of drivers for kbd/touchpad [ 33.783] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 33.783] X Protocol Version 11, Revision 0 [ 33.783] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian [ 33.783] Current Operating System: Linux sus 3.2.0-0.bpo.2-amd64 #1 SMP Sun Mar 25 10:33:35 UTC 2012 x86_64 [ 33.783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=8686f840-d165-4d1e-b995-2ebbd94aa3d2 ro quiet [ 33.783] Build Date: 28 August 2011 09:39:43PM [ 33.783] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <[email protected]>) [ 33.783] Current version of pixman: 0.16.4 [ 33.783] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 33.783] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 33.783] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 09:34:04 2012 [ 33.837] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.936] (==) No Layout section. Using the first Screen section. [ 33.936] (==) No screen section available. Using defaults. [ 33.936] (**) |-->Screen "Default Screen Section" (0) [ 33.936] (**) | |-->Monitor "<default monitor>" [ 33.936] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.936] (==) Automatically adding devices [ 33.936] (==) Automatically enabling devices [ 34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 34.164] Entry deleted from font path. [ 34.226] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 34.226] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.226] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.226] (II) Loader magic: 0x7d3ae0 [ 34.226] (II) Module ABI versions: [ 34.226] X.Org ANSI C Emulation: 0.4 [ 34.226] X.Org Video Driver: 10.0 [ 34.226] X.Org XInput driver : 12.2 [ 34.226] X.Org Server Extension : 5.0 [ 34.227] (--) PCI:*(0:1:5:0) 1002:9712:103c:1661 rev 0, Mem @ 0xd0000000/268435456, 0xf1400000/65536, 0xf1300000/1048576, I/O @ 0x00008000/256 [ 34.227] (--) PCI: (0:2:0:0) 1002:6760:103c:1661 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 34.227] (II) Open ACPI successful (/var/run/acpid.socket) [ 34.227] (II) LoadModule: "extmod" [ 34.249] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 34.277] (II) Module extmod: vendor="X.Org Foundation" [ 34.277] compiled for 1.10.4, module version = 1.0.0 [ 34.277] Module class: X.Org Server Extension [ 34.277] ABI class: X.Org Server Extension, version 5.0 [ 34.277] (II) Loading extension SELinux [ 34.277] (II) Loading extension MIT-SCREEN-SAVER [ 34.277] (II) Loading extension XFree86-VidModeExtension [ 34.277] (II) Loading extension XFree86-DGA [ 34.277] (II) Loading extension DPMS [ 34.277] (II) Loading extension XVideo [ 34.277] (II) Loading extension XVideo-MotionCompensation [ 34.277] (II) Loading extension X-Resource [ 34.277] (II) LoadModule: "dbe" [ 34.277] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 34.299] (II) Module dbe: vendor="X.Org Foundation" [ 34.299] compiled for 1.10.4, module version = 1.0.0 [ 34.299] Module class: X.Org Server Extension [ 34.299] ABI class: X.Org Server Extension, version 5.0 [ 34.299] (II) Loading extension DOUBLE-BUFFER [ 34.299] (II) LoadModule: "glx" [ 34.299] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 34.477] (II) Module glx: vendor="X.Org Foundation" [ 34.477] compiled for 1.10.4, module version = 1.0.0 [ 34.477] ABI class: X.Org Server Extension, version 5.0 [ 34.477] (==) AIGLX enabled [ 34.477] (II) Loading extension GLX [ 34.477] (II) LoadModule: "record" [ 34.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 34.481] (II) Module record: vendor="X.Org Foundation" [ 34.481] compiled for 1.10.4, module version = 1.13.0 [ 34.481] Module class: X.Org Server Extension [ 34.481] ABI class: X.Org Server Extension, version 5.0 [ 34.481] (II) Loading extension RECORD [ 34.481] (II) LoadModule: "dri" [ 34.481] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 34.512] (II) Module dri: vendor="X.Org Foundation" [ 34.512] compiled for 1.10.4, module version = 1.0.0 [ 34.512] ABI class: X.Org Server Extension, version 5.0 [ 34.512] (II) Loading extension XFree86-DRI [ 34.512] (II) LoadModule: "dri2" [ 34.512] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 34.515] (II) Module dri2: vendor="X.Org Foundation" [ 34.515] compiled for 1.10.4, module version = 1.2.0 [ 34.515] ABI class: X.Org Server Extension, version 5.0 [ 34.515] (II) Loading extension DRI2 [ 34.515] (==) Matched ati as autoconfigured driver 0 [ 34.515] (==) Matched vesa as autoconfigured driver 1 [ 34.515] (==) Matched fbdev as autoconfigured driver 2 [ 34.515] (==) Assigned the driver to the xf86ConfigLayout [ 34.515] (II) LoadModule: "ati" [ 34.706] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 34.724] (II) Module ati: vendor="X.Org Foundation" [ 34.724] compiled for 1.10.3, module version = 6.14.2 [ 34.724] Module class: X.Org Video Driver [ 34.724] ABI class: X.Org Video Driver, version 10.0 [ 34.724] (II) LoadModule: "radeon" [ 34.725] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 34.923] (II) Module radeon: vendor="X.Org Foundation" [ 34.923] compiled for 1.10.3, module version = 6.14.2 [ 34.923] Module class: X.Org Video Driver [ 34.923] ABI class: X.Org Video Driver, version 10.0 [ 34.945] (II) LoadModule: "vesa" [ 34.945] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 34.988] (II) Module vesa: vendor="X.Org Foundation" [ 34.988] compiled for 1.10.3, module version = 2.3.0 [ 34.988] Module class: X.Org Video Driver [ 34.988] ABI class: X.Org Video Driver, version 10.0 [ 34.988] (II) LoadModule: "fbdev" [ 34.988] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 35.020] (II) Module fbdev: vendor="X.Org Foundation" [ 35.020] compiled for 1.10.3, module version = 0.4.2 [ 35.020] ABI class: X.Org Video Driver, version 10.0 [ 35.020] (II) RADEON: Driver for ATI Radeon chipsets: <snip> [ 35.023] (II) VESA: driver for VESA chipsets: vesa [ 35.023] (II) FBDEV: driver for framebuffer: fbdev [ 35.023] (++) using VT number 7 [ 35.033] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 35.033] (II) [KMS] Kernel modesetting enabled. [ 35.033] (WW) Falling back to old probe method for vesa [ 35.034] (WW) Falling back to old probe method for fbdev [ 35.034] (II) Loading sub module "fbdevhw" [ 35.034] (II) LoadModule: "fbdevhw" [ 35.034] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 35.185] (II) Module fbdevhw: vendor="X.Org Foundation" [ 35.185] compiled for 1.10.4, module version = 0.0.2 [ 35.185] ABI class: X.Org Video Driver, version 10.0 [ 35.288] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.288] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 35.288] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 35.288] (==) RADEON(0): Default visual is TrueColor [ 35.288] (==) RADEON(0): RGB weight 888 [ 35.288] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 35.288] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712) [ 35.288] (II) RADEON(0): PCI card detected [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: Searching for BusID pci:0000:01:05.0 [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: drmOpenMinor returns 9 [ 35.288] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 [ 35.288] (II) Loading sub module "exa" [ 35.288] (II) LoadModule: "exa" [ 35.288] (II) Loading /usr/lib/xorg/modules/libexa.so [ 35.335] (II) Module exa: vendor="X.Org Foundation" [ 35.335] compiled for 1.10.4, module version = 2.5.0 [ 35.335] ABI class: X.Org Video Driver, version 10.0 [ 35.335] (II) RADEON(0): KMS Color Tiling: disabled [ 35.335] (II) RADEON(0): KMS Pageflipping: enabled [ 35.335] (II) RADEON(0): SwapBuffers wait for vsync: enabled [ 35.360] (II) RADEON(0): Output VGA-0 has no monitor section [ 35.360] (II) RADEON(0): Output LVDS has no monitor section [ 35.364] (II) RADEON(0): Output HDMI-0 has no monitor section [ 35.388] (II) RADEON(0): EDID for output VGA-0 [ 35.388] (II) RADEON(0): EDID for output LVDS [ 35.388] (II) RADEON(0): Manufacturer: LGD Model: 2ac Serial#: 0 [ 35.388] (II) RADEON(0): Year: 2010 Week: 0 [ 35.388] (II) RADEON(0): EDID Version: 1.3 [ 35.388] (II) RADEON(0): Digital Display Input [ 35.388] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 35.388] (II) RADEON(0): Gamma: 2.20 [ 35.388] (II) RADEON(0): No DPMS capabilities specified [ 35.388] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 35.388] (II) RADEON(0): First detailed timing is preferred mode [ 35.388] (II) RADEON(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 35.388] (II) RADEON(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 35.388] (II) RADEON(0): Manufacturer's mask: 0 [ 35.388] (II) RADEON(0): Supported detailed timing: [ 35.388] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 35.388] (II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 35.388] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 35.388] (II) RADEON(0): LG Display [ 35.388] (II) RADEON(0): LP156WH2-TLQB [ 35.388] (II) RADEON(0): EDID (in hex): [ 35.388] (II) RADEON(0): 00ffffffffffff0030e4ac0200000000 [ 35.388] (II) RADEON(0): 00140103802213780ac1259d5f5b9b27 [ 35.388] (II) RADEON(0): 19505400000001010101010101010101 [ 35.388] (II) RADEON(0): 010101010101121b567850000e302020 [ 35.388] (II) RADEON(0): 240058c2100000190000000000000000 [ 35.388] (II) RADEON(0): 00000000000000000000000000fe004c [ 35.388] (II) RADEON(0): 4720446973706c61790a2020000000fe [ 35.388] (II) RADEON(0): 004c503135365748322d544c514200c1 [ 35.388] (II) RADEON(0): Printing probed modes for output LVDS [ 35.388] (II) RADEON(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 35.388] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) [ 35.388] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz) [ 35.388] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 35.388] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 35.388] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz) [ 35.388] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz) [ 35.388] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 35.392] (II) RADEON(0): EDID for output HDMI-0 [ 35.392] (II) RADEON(0): Output VGA-0 disconnected [ 35.392] (II) RADEON(0): Output LVDS connected [ 35.392] (II) RADEON(0): Output HDMI-0 disconnected [ 35.392] (II) RADEON(0): Using exact sizes for initial modes [ 35.392] (II) RADEON(0): Output LVDS using initial mode 1366x768 [ 35.392] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 35.392] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000 [ 35.392] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM [ 35.392] (==) RADEON(0): DPI set to (96, 96) [ 35.392] (II) Loading sub module "fb" [ 35.392] (II) LoadModule: "fb" [ 35.392] (II) Loading /usr/lib/xorg/modules/libfb.so [ 35.492] (II) Module fb: vendor="X.Org Foundation" [ 35.492] compiled for 1.10.4, module version = 1.0.0 [ 35.492] ABI class: X.Org ANSI C Emulation, version 0.4 [ 35.492] (II) Loading sub module "ramdac" [ 35.492] (II) LoadModule: "ramdac" [ 35.492] (II) Module "ramdac" already built-in [ 35.492] (II) UnloadModule: "vesa" [ 35.492] (II) Unloading vesa [ 35.492] (II) UnloadModule: "fbdev" [ 35.492] (II) Unloading fbdev [ 35.492] (II) UnloadModule: "fbdevhw" [ 35.492] (II) Unloading fbdevhw [ 35.492] (--) Depth 24 pixmap format is 32 bpp [ 35.492] (II) RADEON(0): [DRI2] Setup complete [ 35.492] (II) RADEON(0): [DRI2] DRI driver: r600 [ 35.492] (II) RADEON(0): Front buffer size: 4224K [ 35.492] (II) RADEON(0): VRAM usage limit set to 228096K [ 35.615] (==) RADEON(0): Backing store disabled [ 35.615] (II) RADEON(0): Direct rendering enabled [ 35.658] (II) RADEON(0): Setting EXA maxPitchBytes [ 35.658] (II) EXA(0): Driver allocated offscreen pixmaps [ 35.658] (II) EXA(0): Driver registered support for the following operations: [ 35.658] (II) Solid [ 35.658] (II) Copy [ 35.658] (II) Composite (RENDER acceleration) [ 35.658] (II) UploadToScreen [ 35.658] (II) DownloadFromScreen [ 35.687] (II) RADEON(0): Acceleration enabled [ 35.687] (==) RADEON(0): DPMS enabled [ 35.687] (==) RADEON(0): Silken mouse enabled [ 35.721] (II) RADEON(0): Set up textured video [ 35.721] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 35.721] (--) RandR disabled [ 35.721] (II) Initializing built-in extension Generic Event Extension [ 35.721] (II) Initializing built-in extension SHAPE [ 35.721] (II) Initializing built-in extension MIT-SHM [ 35.721] (II) Initializing built-in extension XInputExtension [ 35.721] (II) Initializing built-in extension XTEST [ 35.721] (II) Initializing built-in extension BIG-REQUESTS [ 35.721] (II) Initializing built-in extension SYNC [ 35.721] (II) Initializing built-in extension XKEYBOARD [ 35.721] (II) Initializing built-in extension XC-MISC [ 35.721] (II) Initializing built-in extension SECURITY [ 35.721] (II) Initializing built-in extension XINERAMA [ 35.721] (II) Initializing built-in extension XFIXES [ 35.721] (II) Initializing built-in extension RENDER [ 35.721] (II) Initializing built-in extension RANDR [ 35.721] (II) Initializing built-in extension COMPOSITE [ 35.721] (II) Initializing built-in extension DAMAGE [ 35.721] (II) SELinux: Disabled on system [ 35.982] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 35.982] (II) AIGLX: enabled GLX_INTEL_swap_event [ 35.982] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 35.982] (II) AIGLX: enabled GLX_SGI_make_current_read [ 35.982] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 35.982] (II) AIGLX: Loaded and initialized /usr/lib/dri/r600_dri.so [ 35.982] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 35.999] (II) RADEON(0): Setting screen physical size to 361 x 203 [ 43.896] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.896] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.896] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.924] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.924] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.924] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.988] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.988] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.988] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 67.375] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 67.376] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 67.376] (II) LoadModule: "evdev" [ 67.376] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (II) Module evdev: vendor="X.Org Foundation" [ 67.392] compiled for 1.10.3, module version = 2.6.0 [ 67.392] Module class: X.Org XInput Driver [ 67.392] ABI class: X.Org XInput driver, version 12.2 [ 67.392] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 67.392] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (**) Logitech USB Optical Mouse: always reports core events [ 67.392] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 67.392] (--) Logitech USB Optical Mouse: Found 12 mouse buttons [ 67.392] (--) Logitech USB Optical Mouse: Found scroll wheel(s) [ 67.392] (--) Logitech USB Optical Mouse: Found relative axes [ 67.392] (--) Logitech USB Optical Mouse: Found x and y relative axes [ 67.392] (II) Logitech USB Optical Mouse: Configuring as mouse [ 67.392] (II) Logitech USB Optical Mouse: Adding scrollwheel support [ 67.392] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 67.392] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 67.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input14/event1" [ 67.392] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) [ 67.392] (II) Logitech USB Optical Mouse: initialized for relative axes. [ 67.392] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 67.392] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 67.392] (II) No input driver/identifier specified (ignoring) [ 78.692] (II) Logitech USB Optical Mouse: Close [ 78.692] (II) UnloadModule: "evdev" [ 78.692] (II) Unloading evdev

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >