Search Results

Search found 8189 results on 328 pages for 'fedora 16'.

Page 159/328 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

  • Configuring Nagios BGP plugin on Ubuntu

    - by user141610
    I am trying to configure nagios check_bgp_neighbors plug-in on Ubuntu and followed README file of check_bgp_neighbors plug-in. I have made following changes: define command{ command_name check_bgp_all command_line $USER1$/check_bgp_neighbors -H $HOSTADDRESS$ -C $USER3$ -n $ARG1$ -n $ARG2$ } to define command{ command_name check_bgp_all command_line /usr/local/nagios/libexec/check_bgp_neighbors.sh -H xx.xx.xx.49 -C xx.xx.xx.50 And define service{ use server-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!10.0.0.1!172.16.0.2 } to define service{ use generic-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!xx.xx.xx.50 } xx.xx.xx.49 is the IP of the host router and xx.xx.xx.50 is the IP of eBGP neighbour. After that it shows critical status. I know my command is not correct but cannot detect the problem. I learned that in this plug-in user-name and password of the host router are required but don't know how and where to provide it. Nagios log does not show any error message. Status information: Failed: status:0 prefixes:0 sent:0 received:0

    Read the article

  • Should I limit end-user gigabit ports to avoid saturating uplink/trunk connections?

    - by Joel Coel
    We have a campus with 16 buildings and older 850nm 1Gbps fiber links between the buildings, that all come to a core switch for our servers that also uses 1Gbps ports. We're finally starting to replace our aging 10/100 end-user switches, and much of what we're looking at are 1 Gbps units. My question is, since the trunk/uplink lines are still 1Gbps, if I were to install 1 Gbps switches for end users, should I limit the ports to 100Mbps until I can also upgrade the trunks to avoid allowing a bad-behaving host to saturate a trunk line (since we're a college, we have plenty of mis-behaving hosts) and thereby create a DoS situation for a building, or will TCP congestion control typically take care of that for me? What if we have a lot of UDP traffic (games, video chats, even a small amount of bittorrent)?

    Read the article

  • Does moving a file outside NTFS loose data in alternate data streams?

    - by jay
    I have a lot of files on machine running Windows Server 2008 which I wanted to move to a Fedora machine. How can I keep the attributes stored in, for example, media files (date taken, rating, length, etc) while transfering it to outside the realm of NTFS's Alternate Data Streams. I'm aware that similar metadata exists in other file systems, but what happens when you move these files? And what's the best way to retain them in other file systems?

    Read the article

  • View rotated log files Mac OS X Server (*.?.gz)

    - by Meltemi
    Trying to look at some of our older log files and find they're cryptic "Unix Executable Files". This particular server I'm working with is an older Mac OS X Server (10.4 - Tiger). -rw-r----- 1 root admin 36 1 Jun 15:48 wtmp -rw-r--r-- 1 root admin 578 27 May 17:40 wtmp.0.gz -rw-r----- 1 root admin 89 26 Apr 13:57 wtmp.1.gz -rw-r----- 1 root admin 78 29 Mar 16:43 wtmp.2.gz -rw-r----- 1 root admin 69 15 Feb 17:21 wtmp.3.gz -rw-r----- 1 root admin 137 16 Jan 13:09 wtmp.4.gz i'm using zless to try and view the contents of the .gz files. and what i see is unreadable: ... <DF>^R<AF>ttyp1^@^@^@joe54^@^@^@^@^@108.184.63.22^@^@^@^@K<DF>"<B8>ttyp1^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@K<DF>%<A1>console^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@K<E0>1 ~^@^@^@^@^@^@^@shutdown^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@K<E0>1^L~^@^@^@^@^@^@^@reboot^@^@^@^@^@^@ ... same goes for system.log.0.gz, etc... anything that's been rolled in compressed .gz files. What am i missing?

    Read the article

  • Serious voltage and temperature problems

    - by James Willson
    My computer has been acting up when I play games so I wanted to look into why. Issue 1: GPU Temp According to afterburner and speedfan my 8800GTX idles at 90 degrees and then when playing games shoots up to over 110C which is when my graphics basically starts to give rendering issues. Issue 2: CPU Temp Speedfan is saying my CPU temp is 83C idle but when I look at core temp it says core0 is at 35C and core1 is at 33C. Issue 3: Voltages This is what speedfan is saying for my voltages: Vcore1: 1.01V Vcore2: 1.90V +3.3V: 3.31V +5V: 4.95V +12V: 0.51V -12V: -16.80V -5V: -8.43V +5V 5.13V Vbat: 3.25V Vcore: 3.00V +3.3V: 3.20V These voltages, for lack of a better word, look f*cked. With all this happening, the computer runs ok under normal use. Is the software giving out incorrect readouts or instead should I immediately move the computer into another room before it explodes? P.s I would like to add this is a stock system. EVGA 8800GTX, E6850 CPU, 800W PSU

    Read the article

  • How to route all traffic over site to site VPN tunnel?

    - by Hutch
    I have a site to site VPN configured between our main site (Site A) and a remote site (Site B). Site A is 10.60.0.0/16 Site B is 192.168.99.0/24 The firewall in Site B is a Juniper SSG running ScreenOS 6.3 and I'm using a route based VPN. The tunnel works perfectly in that from Site A you can reach 192.168.99.0 via the tunnel, and from Site B you can reach 10.60.0.0 via the tunnel. However, we want it so that if you're in Site B and want the Internet it goes via the firewall at Site A, and right now on the Juniper 0.0.0.0 has the ISP router as next hop. My understanding is that on the Juniper, I can set a route for the /32 public IP at our main site that the VPN tunnel connects to to the ISP router via ethernet0/0 (the SSG's external interface), and then modify the 0.0.0.0 route to use our main site firewall via tunnel.1 (the VPN tunnel). Not sure I've explained that so well but is my understanding correct? Thanks

    Read the article

  • Upgrading from MySQL Server to MariaDB

    - by Korrupzion
    I've heard that MariaDB has better performance than MySQL-Server. I'm running software that makes an intensive use of MySQL, thats why I want to try upgrading to MariaDB. Please tell me your experiences doing this conversion, and instructions or tips. Also, which files I should take care of for making a backup of MySQL-Server, so if something goes wrong with MariaDB, I could rollback to MySQL without issues? I would use this but i'm not sure if it's enough to get a full backup of MySQL-Server confs and databases mysqldump --all-databases backup /etc/mysql My Environment: uname -a (Debian Lenny) Linux charizard 2.6.26-2-amd64 #1 SMP Thu Sep 16 15:56:38 UTC 2010 x86_64 GNU/Linux MySQL Server Version: Server version 5.0.51a-24+lenny4 MySQL Client: 5.0.51a Statistics: Threads: 25 Questions: 14690861 Slow queries: 9 Opens: 21428 Flush tables: 1 Open tables: 128 Queries per second avg: 162.666 Uptime: 1 day 1 hour 5 min 13 sec Thanks! PS: Rate my english :D

    Read the article

  • Pygrub with DRBD on Xen 3.2

    - by Joril
    Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

    Read the article

  • DDoS attacks to PBX

    - by user316687
    I'm wondering if DDOS attacks to PBX or telecommunications systems is possibe real. According to this links: http://threatpost.com/en_us/blogs/firm-sees-more-ddos-attacks-aimed-telecom-systems-073112 http://news.softpedia.com/news/DDOS-Attacks-Against-Telecom-Systems-Cost-as-Little-as-20-16-Per-Day-284875.shtml it is possible. There are DDOs attacks to web servers, which mostly give them so much concurrent loads or connections that service get unavailable. Many government or non-profit organizations that suffered this kind of attacks, eventually could choose to shutdown their web server and that's it, waiting for these attacks to end. For a DDOs attacks to PBX, I imagine that it would result in telephones getting busy or ringing all the time unstoppably. This kind of attack could really damage any kind organization. Is it possible to do that or are we just in the beginnings?

    Read the article

  • how to remotely open an URL in Firefox in a specific profile?

    - by miernik
    I have several instances of Firefox with several different profiles running. Among them profiles with the names "software" and "test". I am trying to open an URL from a bash script to have it open in profile "test", like this: firefox -P "test" http://www.example.org/ However that opens it in profile "software" anyway. Any ideas? Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.8) Gecko/20100308 Iceweasel/3.5.8 (like Firefox/3.5.8) No, it is not a permissions problem, all my profile directories are perfectly under my permissions: root@przehyba:~/.mozilla# ls -ld firefox/ drwx------ 13 miernik miernik 4096 Mar 11 09:15 firefox/ root@przehyba:~/.mozilla# ls -ld firefox/* drwxr-xr-x 9 miernik miernik 4096 Mar 12 11:29 firefox/info -rw-r--r-- 1 miernik miernik 560 Mar 11 09:15 firefox/profiles.ini drwxr-xr-x 10 miernik miernik 4096 Mar 16 11:51 firefox/software drwxr-xr-x 9 miernik miernik 4096 Mar 11 09:14 firefox/tech drwxr-xr-x 11 miernik miernik 4096 Mar 15 22:48 firefox/test root@przehyba:~/.mozilla#

    Read the article

  • Cannot deploy reports on localhost/reports

    - by Jackson Sunuwar
    I am using Microsoft SQL Server 2008 R2, Sql Server Reporting Services(SSRS) on an xp virtual machine.. I have created a report and am trying to deploy it... but getting this error... The specified report server URL http://localhost/Reports could not be found. Verify the syntax of the URL and that the report server exists. I went to see my "services".... SQL Server (SQLEXPRESS) is "started", but SQL Server (MSSQLSERVER) is not. When I try to start it, it says windows could not start the sql server on local computer error code 10048 I tried to go in cmd and tried C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe -sMSSQLSERVER I get this, Server Error: 17058, Severity: 16, State: 1. can someone please help me...

    Read the article

  • Multiple IP Addresses on a Traceroute Line

    - by Paul
    I'm doing a traceroute from my box to ....say.... stackoverflow.com. I see a couple of instances where there are multiple ip's on one line. For instance, in below, line #2 has two IPs: 10.1.6.5 and 10.1.4.5 Also on line #4, there are two timestamps after 216.182.236.96: 0.653 ms and 0.637 ms What are these? This is on Linux Traceroute example: traceroute to www.stackoverflow.com (198.252.206.16), 30 hops max, 60 byte packets 2 ip-10-1-6-5.us-west-1.compute.internal (10.1.6.5) 0.329 ms 0.425 ms ip-10-1-4-5.us-west-1.compute.internal (10.1.4.5) 0.471 ms 4 216.182.236.104 (216.182.236.104) 0.554 ms 216.182.236.96 (216.182.236.96) 0.653 ms 0.637 ms 5 205.251.230.64 (205.251.230.64) 0.616 ms 205.251.229.232 (205.251.229.232) 1.305 ms 205.251.230.64 (205.251.230.64) 0.573 ms

    Read the article

  • dns hierarchy not working !! Please help

    - by nikhilelite
    (DNS1 ,WWW1, Gateway1) (sub-internal network) (DNS0,WWW0,Gateway0) (internal network) DNS1: 192.168.250.3/24 WWW1: 192.168.250.4/24 Gateway1: 192.168.250.1 /24 (internal) :: 192.168.0.150 to 192.168.0.175 (external) DNS0:192.168.0.197/24 WWW0:192.168.0.197/24 Gateway0: 192.168.0.1 (internal) :: 69.94.x.x (external, dynamic ,isp control) Expected behavior: When using dig from internal (192.168.250.0/24) hosts, and query about domain from 192.168.0.197/16 nameserver's hosts (for which its authoritative) , it should return the ip address. Whats happening: After dig, answer section empty, the query is trying to access a.root server instead of 192.168.0.197 ,even though i have defined 192.168.0.197 as dns in gateway1's resolv.conf Why? I need this working asap, can anyone here help ?

    Read the article

  • Rename multiple files as "Modified Date/Time" using cmd or Powershell

    - by Mehper C. Palavuzlar
    I have hundreds of JPG files in a folder. I want to rename each file so that the file name is replaced with "Modified Date/Time" of that file, namely DD.MM.RRRR.HH.MM.jpg. For example, Before After 001.jpg 11.01.2011.16.58.jpg 002.jpg 12.01.2011.09.32.jpg 003.jpg 14.01.2011.12.41.jpg ... ... Since colon (:) cannot be used in file names, the colon between HH and MM must be replaced with a period. I don't want to use a 3rd party tool. Can you provide me with the code to achieve this in Powershell or command line?

    Read the article

  • Changing video resolution with Handbrake - anamorphic and modulus parameter

    - by MarAja
    I would like to convert a video in 16:9 format (1920*1080) to a 4:3 format (640*480) with Handbrake. Can anyone explain me what are anamorphic and modulus parameters? I tried to set modulus to 2 or 16 on a video but I can't really see the difference between both videos. I would also know if there are different algorithms to change a video resolution and if I am doing it in the right way. Bonus question: What are PAR width and height? They are set by default to 1, should I change them?

    Read the article

  • How to boot a Linux live USB on a Mac?

    - by nambuls
    I have a USB stick with a Fedora 11 live environment on it. It's booting fine on 3 PCs where I've tried it. But I can't get it to boot on a Mac (Intel). When pressing the alt key (or command key, I don't remember which one) during startup I can only choose the "Macintosh HD" and the USB stick doesn't appear.

    Read the article

  • Is there keyboard shortcut to move input focus to the Google Search box?

    - by Chen Jun
    I'm searching on Google a lot. I find it very annoying to move my mouse to the search box and click once so that I can input another search term. I did Googled some time, but no one seems to be annoyed with this, quite unbelievable. I'm using Firefox 8 and Chrome 16, on Windows 7. If you know Atlassian Confluence, you might probably know that pressing / will move input focus to the upper right search box, very convenient for a keyboard shortcut hobbyist . Try it here.

    Read the article

  • OpenVPN Configuration - Windows 7 client & debian server

    - by Guillaume
    I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

    Read the article

  • I found a some bad sectors with chkdsk. Should I be worried?

    - by mottalrd
    Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

    Read the article

  • PHP-CGI Not working on CentOS 5?

    - by EJay
    Just started working with CentOS 5 after wanting to leave Ubuntu server for something a bit more industry-standard, and while trying to configure php-cgi, I run into this: [root@~~~~~~~ run]# /etc/init.d/php_cgi start Starting php-cgi: spawn-fcgi: child exited with: 255 [FAILED] Not 100% sure what's happening here, but no Google result returns anything regarding error code 255. I was following this guide: http://bash.cyberciti.biz/web-server/rhel-fedora-php-fastcgi-initd-script/ if it helps. EDIT: Forgot to mention this is with Nginx, not Lighttpd. Many thanks, Elliot

    Read the article

  • sata2 hdd not reported correctly on gigabyte mobo

    - by hyperboreean
    hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

    Read the article

  • Is it important to reboot Linux after a kernel update?

    - by lfaraone
    I have a few production Fedora and Debian webservers that host our sites as well as user shell accounts (used for git vcs work, some screen+irssi sessions, etc). Occasionally a new kernel update will come down the pipeline in yum/apt-get, and I was wondering if most of the fixes are severe enough to warrant a reboot, or if I can apply the fixes sans reboot. Our main development server currently has 213 days of uptime, and I wasn't sure if it was insecure to run such an older kernel.

    Read the article

  • Screen Casting using ffmpeg (too fast)

    - by rowman
    I can use ffmpeg to make screen casts: ffmpeg -f x11grab -s 1280x800 -i :0.0 -c:v libx264 -framerate 30 -r 30 -crf 18 out.mkv However the output comes out to be too fast paced. It also happens with GTK RecordMyDesktop if I enable the encode on the fly. So, the questions is how to get a normal video pace. Also in order to capture the sound with ffmpeg what option should be used? FFmpeg Output: ffmpeg -f x11grab -s 1280x800 -r 30 -i :0.0 -c:v libx264 -framerate 30 -r 30 -crf 18 out.mkv ffmpeg version N-35162-g87244c8 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 7 2012 15:56:19 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5) configuration: --enable-gpl --enable-libfaac --enable-libfdk-aac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libvpx --enable-x11grab --enable-libx264 --enable-nonfree --enable-version3 libavutil 51. 73.102 / 51. 73.102 libavcodec 54. 64.100 / 54. 64.100 libavformat 54. 29.105 / 54. 29.105 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 19.102 / 3. 19.102 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 [x11grab @ 0xab896a0] device: :0.0 -> display: :0.0 x: 0 y: 0 width: 1280 height: 800 [x11grab @ 0xab896a0] shared memory extension found [x11grab @ 0xab896a0] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0': Duration: N/A, start: 1350136942.608988, bitrate: 983040 kb/s Stream #0:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 1280x800, 983040 kb/s, 30 tbr, 1000k tbn, 30 tbc [libx264 @ 0xab87320] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 SlowCTZ SlowAtom [libx264 @ 0xab87320] profile High 4:4:4 Predictive, level 3.2, 4:4:4 8-bit [libx264 @ 0xab87320] 264 - core 128 r2 198a7ea - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=4 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=18.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf54.29.105 Stream #0:0: Video: h264, yuv444p, 1280x800, q=-1--1, 1k tbn, 30 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Press [q] to stop, [?] for help frame= 10 fps=0.0 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 19 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 28 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 37 fps= 17 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 45 fps= 16 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 47 fps= 14 q=0.0 size= 1kB time=00:00:00.00 bitrate= 0.0kbits/sframe= 52 fps= 13 q=24.0 size= 257kB time=00:00:00.00 bitrate=2101632.0kbiframe= 55 fps= 12 q=24.0 size= 257kB time=00:00:00.10 bitrate=20808.2kbitsframe= 59 fps= 11 q=24.0 size= 289kB time=00:00:00.23 bitrate=10145.0kbitsframe= 64 fps= 11 q=24.0 size= 289kB time=00:00:00.40 bitrate=5894.7kbits/frame= 70 fps= 11 q=24.0 size= 289kB time=00:00:00.60 bitrate=3933.1kbits/frame= 72 fps= 10 q=24.0 size= 289kB time=00:00:00.66 bitrate=3549.2kbits/frame= 77 fps=9.8 q=24.0 size= 289kB time=00:00:00.83 bitrate=2837.7kbits/frame= 80 fps=9.6 q=24.0 size= 289kB time=00:00:00.93 bitrate=2533.5kbits/frame= 85 fps=9.3 q=24.0 size= 289kB time=00:00:01.10 bitrate=2146.9kbits/frame= 89 fps=9.3 q=24.0 size= 289kB time=00:00:01.23 bitrate=1917.1kbits/frame= 92 fps=9.1 q=24.0 size= 289kB time=00:00:01.33 bitrate=1773.3kbits/frame= 96 fps=9.0 q=24.0 size= 289kB time=00:00:01.46 bitrate=1612.4kbits/frame= 99 fps=8.8 q=24.0 size= 321kB time=00:00:01.56 bitrate=1676.8kbits/frame= 104 fps=8.7 q=24.0 size= 321kB time=00:00:01.73 bitrate=1515.2kbits/frame= 109 fps=5.3 q=24.0 Lsize= 1093kB time=00:00:03.56 bitrate=2511.5kbits/s video:1092kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.120198% [libx264 @ 0xab87320] frame I:3 Avg QP:18.93 size:142610 [libx264 @ 0xab87320] frame P:43 Avg QP:20.79 size: 15751 [libx264 @ 0xab87320] frame B:63 Avg QP:23.75 size: 195 [libx264 @ 0xab87320] consecutive B-frames: 21.1% 1.8% 11.0% 66.1% [libx264 @ 0xab87320] mb I I16..4: 50.0% 21.1% 28.9% [libx264 @ 0xab87320] mb P I16..4: 6.1% 0.9% 3.2% P16..4: 5.5% 1.2% 0.6% 0.0% 0.0% skip:82.5% [libx264 @ 0xab87320] mb B I16..4: 0.4% 0.1% 0.0% B16..8: 2.9% 0.1% 0.0% direct: 0.0% skip:96.5% L0:40.7% L1:57.0% BI: 2.3% [libx264 @ 0xab87320] 8x8 transform intra:14.5% inter:46.1% [libx264 @ 0xab87320] coded y,u,v intra: 33.5% 24.1% 25.4% inter: 0.9% 0.4% 0.4% [libx264 @ 0xab87320] i16 v,h,dc,p: 70% 26% 1% 3% [libx264 @ 0xab87320] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 11% 21% 30% 5% 7% 5% 7% 4% 10% [libx264 @ 0xab87320] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 32% 35% 12% 2% 4% 3% 4% 3% 5% [libx264 @ 0xab87320] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0xab87320] ref P L0: 57.0% 5.6% 26.8% 10.6% [libx264 @ 0xab87320] ref B L0: 69.4% 22.6% 8.0% [libx264 @ 0xab87320] ref B L1: 93.7% 6.3% [libx264 @ 0xab87320] kb/s:2460.40

    Read the article

  • free Raw-File Converter/Editor

    - by RCIX
    I have RAW files output by a program with a specific set of properties (Photoshop RAW, 16 bits, IBM PC byte order, no header, 1 non-interleaved channel, variable sizes like 257X257 or 129X513); does anyone know of a free tool that will allow me to convert to and from this format, and possibly do basic editing (selection, copy/paste, rotation of selection)? I've tried Picasa, XNView, and Paint Shop Pro 7 and none of them work properly. The closest i get is Paint Shop Pro which will at least make a serviceable attempt to open these files but i can't set all of the proper settings. XNView just might be able to edit it if i can figure out how to change the open settings for a particular raw file. So my questions at current are: how do i tell XNView to open a raw file a particular way? Failing that, is there any free tool that can open Photoshop-RAW files with the above settings (that's not photoshop)? If it helps, i'm trying to import/export/edit hieghtmap data for maps for Supreme Commander.

    Read the article

  • MPlayer refuses to generate mono wav file

    - by JCCyC
    I want to downsample an existing audio file to 8KHz mono. This command line downsamples it to stereo: mplayer -quiet -vo null -vc dummy -af volume=0,resample=8000:0:1 -ao pcm:waveheader:file="/tmp/blah1.wav" ~/from_my_cellphone.3ga It generates a file that the file utility identifies as stereo: $ file /tmp/blah1.wav /tmp/blah1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 8000 Hz Now, if I read the documentation correctly, I should add pan=1:0.5:0.5 so I get a file that's half the size: mplayer -quiet -vo null -vc dummy -af volume=0,resample=8000:0:1:pan=1:0.5:0.5 -ao pcm:waveheader:file="/tmp/blah2.wav" ~/from_my_cellphone.3ga But it doesn't! blah2.wav is identical to blah1.wav! What am I doing wrong?

    Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >