Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 159/896 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

  - by Forgiver

  I have an external hard drive that is connected to my computer (Windows 7 Ultimate 64 bit) via a USB port. BitLocker has been activated on the hard drive to protect the data. Yesterday I started downloading a huge data from the internet but now it failed to complete because of CRC error. I tried to repair it with chkdsk f:/r where f is the drive letter of that hard drive. There are many messages reporting "unreadable" as follows: What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• How to create a filesystem mountable by windows in linux?

  - by wcoenen

  I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this: created a single partition with fdisk /dev/sdc (and some more commands in the interactive session that follows) formatted the partition with mkfs.msdos /dev/sdc1 If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized. How do I create a FAT32 file system which can actually be used in windows? edit: I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.

  Read the article

• Problem with running a flash Program from flashdrive

  - by rajivpradeep

  Hi, I have a USB drive with two partitions in it. one hidden and the other normal. i have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on windows7 and when run on WINXp, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when i copy the application to desktop and run , it runs with no glitch I was facing the same problem on WIN7 too , but it was running as required when i ran it using "Run in Xp mode" and then i applied a SHIM and is running since then as required. the application is built using VC++ 2008 , What might be the problem.

  Read the article

• Windows XP, USB-Stick and multiple Partitions

  - by Bobby

  Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

  Read the article

• How to slave a 3.5" 500gb sata external hdd(Western Digital) to my dell Inspiron laptop

  - by AJ HDD

  i have a 3.5" western digital my book 500gb external hdd....i gave it to a friend of mine and he broke the usb port in it...i went to a nearby comp repair shop and had him solder the thing...it didnt detect when i plugged it in my dell inspiron laptop........i recently saw about the 3.5" sata to usb enclosure, so i went to check it....strangely when its placed in the enclosure, its not detecting in windows...also when it was put as secondary(im guessing slave) to the shop fellow's desktop it shows up in the bios and starting, but then again doesnt show in windows 7, and the guy told me i need to data recovery to get teh data back p.s.the wd hdd doesnt have os, just data, soo my question is: can i slave the drive to my dell laptop and try to recover the data....if so how? please i would really appreciate it...thanks in advance

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. What might be the problem?

  Read the article

• "System volume folder" always appearing in USB storage stick

  - by ?????? Oyewole

  Whenever I move or copy video files from the PC (Windows 8.1) to my USB storage device and plug it into my TV, I always see a system volume folder on the USB device. This folder can be seen on the PC also, if I choose "view protected system files". My flash drive is formatted with a FAT32 file system. The question is, why is this happening on Windows 8.1, since I never had this problem on Windows 8 before upgrading, and how can I disable this feature?    OK, that's two questions.

  Read the article

• Install Windows XP using USB

  - by AmanBe

  How to install windows xp from usb ? I have the iso image. My cdrom is not working. I read up something on internet about this issue but all the articles are just way too complex and big + they are all different so don't know which one to try. I want to know if someone has tried something like this and to tell me what's the best and easiest way, like some tool that will automatically write the iso file onto the flash drive and make it bootable or smth. Thank you in advance.

  Read the article

• Installing FreeNAS 8.3 problems

  - by osij2is

  I'm trying to install FreeNAS 8.3 on some desktop-level hardware (AMD Phenom + 890FX + 16GB) and I've been unsuccessful. I initially tried using a USB stick and followed the instructions on the FreeNAS site here. Making the USB was simple as the instructions laid out, but as soon as the USB is detected (during the boot process) some text appears and quickly vanishes and my machine reboots infinitely. After trying several different was to make the USB, I tried using a DVD-ROM but again, I had the same issue as the USB stick. This leads me to conclude that either a BIOS setting is incorrect but I have no idea which one. I've changed the BIOS to not "fast" boot per se, and I've correctly configured the boot order per USB stick and the DVD-ROM drive so I know that it's working. Have I missed anything that might be causing this problem? I'm not a FreeBSD/FreeNAS expert by any means.

  Read the article

• Compute number of occurrences in a column of a spreadsheet

  - by wnstnsmth

  I have a Google Drive spreadsheet with a single column that holds string values (Twitter screen names) such as "user1", "user1", "UserX", and I would like to count those values so that I can easily craft a bar chart out of it. So the result should be value occurrence ----------------------- user1 2 UserX 1 ... .... Please note, I only want to look for whole words, and not part words. EG, the words 'on' and 'one' appears in the word 'money' - I would not count this (eg, only the word money is counted). Hope that is clear enough. What formula should I use?

  Read the article

• How to move an existing Win7 setup to a RAID-1 array?

  - by Matthew Scharley

  Currently I have a the following setup: Drive A/B: Identical HDD's Drive C: 2TB external drive with plenty of space currently. Hardware RAID controller Currently I have Drive A which is my boot drive (Win7), and Drive C which is a data drive, and Drive B which I only recently received and is blank. What is the best way of moving off of Drive A, setting up the hardware RAID and then migrating my data back onto the RAID array? I'm proficient with Linux, but I'm not sure if I can get away with simply using dd here. There is currently enough free space on Drive C to take 5-6 copies of a disk image of Drive A, so space isn't an issue.

  Read the article

• Mount linux partition as Windows network share over internet

  - by CptEO

  I have a Linux server running RHEL 6. I have two Windows servers. All servers are connected directly to the web with an external IP, they are not in a local lan. What I would like to achieve is to setup the Linux server so that it offers a single share (the whole partition) that can be mounted as network drive within Windows. I don't want to use any 3rd party software to access the linux server because I want to use the linux server as a backup for Bare Metal Restore. In order to do so, I need to be able to access the linux partition from within the Windows Recovery Enviroment where I cannot install any 3rd party software. The linux server should only be accessible from given IP addresses (e.g. the 2 windows servers). Does anyone know if the setup I would like to have is possible?

  Read the article

• Should I format USB sticks and SD cards to FAT, FAT32, exFAT or NTFS? (Windows files, live Linux distors)

  - by superuser

  Does it depend on the media size which one to chose or on some other parameters? In Windows 7 FAT16 is the default. In pendrivelinux.com's Universal USB Installer FAT32. Which one to chose? How about NTFS for Windows use? How about exFAT? It is tne Microsoft designed filesystem for removable media. Is there a difference in USB sticks and SD cards in this regard? Edit: seeing developments in the other thread, should I still use something like exFAT if I don't want Recycle bins created on every single machine I plug my USB thumb drive in?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a program from flashdrive

  - by rajivpradeep

  I have a USB drive with two partitions in it, one hidden and one normal. I have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on Windows 7 and when run on Win XP, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when I copy the application to desktop and run, it runs with no glitch. I was facing the same problem on Win 7 too, but it was running as required when I ran it using "Run in XP mode" and then I applied a SHIM and is running since then as required. The application is built using VC++ 2008. does anyone know the solution?

  Read the article

• Problem with running a flash Program from pendrive

  - by rajivpradeep

  Hi, I have a USB drive with two partitions in it. one hidden and the other normal. i have an application which swaps the memory and runs the flash application in hidden zone. The problem is that the application works fine on windows7 and when run on WINXp, it swaps the partitions but doesn't run the flash applications but just keeps running in the background. I can see it in task manager. But, when i copy the application to desktop and run , it runs with no glitch I was facing the same problem on WIN7 too , but it was running as required when i ran it using "Run in Xp mode" and then i applied a SHIM and is running since then as required. the application is built using VC++ 2008 , What might be the problem.

  Read the article

• using one disk as cache for others

  - by HugoRune

  Hi Given a PC with several hard drives: Is it possible to use one fast disk as a giant file cache? I.e. automatically copying frequently accessed data to that one disk, and transparently redirecting reads and writes to that disk, so that other drives would only have be accessed occassionally. (writes would have to be forwarded to the other disks after a while of course) Advantages: the other drives could be powered down most of the time; reducing power, heat, noise speed of the other drives would not matter much. cache disk could be solid state. How can I set such a system up? What OS supports these options? Is this possible at all using Windows or Linux?

  Read the article

• Windows has automatically mapped my network drives to my local disk - how do I stop it doing so?

  - by cyborg

  Windows XP decided when I logged on that because the network was unavailable at the time that two of my network drives should be mapped to my local drive so that data would be saved. All well and good but I need it to stop now so I can use my network drives again. I can't find anything relating to the feature but I can't remember the specifics of the message it gave me when it started this operating mode and Google searches for the sort of terms above leads me to a slew of irrelevancies. Any ideas? Thanks.

  Read the article

• Windows doesn't recognise my USB key anymore (it used to work)

  - by dominicbri7

  I use my friend's USB flash drive (Corsair flash voyager 16gb) to transfer files from my laptop to my desktop computer. However, since a couple of days my laptop stopped recognizing the USB key.. while there is still no problems with all other computers. I use Windows 7 64 bits if that can help. I tried uninstalling the driver, rebooting and all those kind of tricks, but it won't work. When I connect it and open the "My computer" window, I see "Removable Disk (G:)" for a moment, then it disappears... then it reappears again and it keeps doing that periodically. I can't even right click then hit "Properties" because it disappears. As I recall, it DOES work on every other computers, I think it has to do with the driver but what can I do?

  Read the article

• Windows 8 Installation Fails

  - by HackToHell

  I have the Windows 8 32-bit ISO which fails to install when booted from a USB flash drive. It copies the files, the boot loader installs, but the install hangs when I boot into Windows 8 for the first time--it simply keeps on spinning forever. The Windows 8 Release Preview does not work either. I did a VHD install of Windows 8 Developer Preview and it installed fine. Looking at the partition from Windows 7, I can see that the files are present. What could be the problem?

  Read the article

• Why is my PC boot time slow when USB HDD attached?

  - by John

  I have a USB Hard disk that I am using as a secondary drive just for extra storage. When this is attached and I start my PC the second screen says searching for mass storage dives for about 5 minutes before continuing on. The same happens when I have a USB pen disk attached upon boot. If I attach the device after the PC has loaded then it is very quick however plugging and unplugging is not ideal. Is there away to disable this in the BIOS as I cannot instantly see an option. On boot it informs me I have an American Trends AMIBIOS in the BIOS setup it states the version as v02.58 2006. This is running on a ASUS MV2 Motherboard.

  Read the article

• Can I install fresh Linux accross partitions (LUKS & LVM) and preserve/use existing home user?

  - by xtian

  With an existing LUKS encrypted logical volume partitioned hard disk dual boot to Windoz and Linux (Fedora 15), is it necessary to "start over" with the LUKS setup when upgrading the system? I recall some note about dividing the Linux installation over different partitions would help to preserve the home data in future update (I can't find this now) Before I try it, is this possible and intended use case for partitioning a Linux installation? # lsblk -fa NAME FSTYPE LABEL MOUNTPOINT sda [80G] +-sda1 [system W95 FAT 32] vfat +-sda2 ext4 /boot +-sda3 [52.4G] crypto_LUKS +-luks-de25ac97-6a32-4b79-a6a0-296a39376b3b (dm-0) LVM2_member +-cryptVG-root (dm-1) [21.5G] ext4 / +-cryptVG-swap (dm-2) [5.4MB] swap [SWAP] +-cryptVG-data (dm-3) [25.6G] ext4 /home

  Read the article

• How to stop windows 7 from asking to format a disk?

  - by clinux

  Hey guys, I have this USB flash drive with a Linux partition that I use inside VirtualBox. Each time I insert it into the USB port, windows keeps asking if it should format it. Is there anyway to disable Windows from asking that? Thanks. EDIT: Disabling auto-run has not resolved the problem unfortunately. Windows will still check if the disk contains a partition it knows about, and ask to format if it doesn't know it. Really nice try though, any other ideas?

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >