Search Results

Search found 5578 results on 224 pages for 'transport rules'.

Page 159/224 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• Win7 playback of dvr-ms files stutters

  - by Jim Lynn

  I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-ms format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-ms (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-ms file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-ms files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-ms looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for WMP but GraphStudio won't show it. It looks like WMP and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

  Read the article

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• ERR_INCOMPLETE_CHUNKED_ENCODING apache 2.4

  - by Bujanca Mihai

  I upgraded my Ubuntu server to 14.04 and Apache 2.4.7. Now my images don't load and console yields net::ERR_INCOMPLETE_CHUNKED_ENCODING. Also, I can sometimes see some of the images load for a little while (1 sec max) and then they disappear. .htaccess RewriteEngine On # Serve the favicon file from img folder RewriteCond %{REQUEST_URI} ^/favicon.ico$ RewriteRule ^(.*)$ /img/$1 [NC,L] # Redirect HTTP traffic to WWW subdomain RewriteCond %{HTTPS} off [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] # Redirect HTTPS traffic to WWW subdomain RewriteCond %{HTTPS} on [NC] RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteRule ^(.*)$ https://www.%{HTTP_HOST}/$1 [R=301,L] # Auto Versioning rules RewriteCond %{REQUEST_FILENAME} !-s RewriteRule ^(.*)\.[\d]+\.(css|js)$ $1.$2 [L] # Default Zend rewrite rules RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] VHost <VirtualHost *:80> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD-access.log combined </VirtualHost> <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin admin@localhost ServerName localhost DocumentRoot /home/mihai/ARTD/www/public/website # Omit this in production environment SetEnv APPLICATION_ENV local <Directory /home/mihai/ARTD/www/public/website > Options Indexes FollowSymLinks MultiViews AllowOverride All #Order deny,allow #Allow from all Require all granted </Directory> <IfModule mod_php5.c> php_value memory_limit 128M php_value upload_max_filesize 20M php_value post_max_size 20M </IfModule> ErrorLog /var/log/apache2/ARTD-ssl-error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/ARTD.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire #<FilesMatch "\.(cgi|shtml|phtml|php)$"> # SSLOptions +StdEnvVars #</FilesMatch> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. #BrowserMatch ".*MSIE.*" \ # nokeepalive ssl-unclean-shutdown \ # downgrade-1.0 force-response-1.0 </VirtualHost> </IfModule> logs Apache/2.4.7 (Ubuntu) PHP/5.5.9-1ubuntu4.3 OpenSSL/1.0.1f (internal dummy connection) 127.0.0.1 - - [25/Aug/2014:13:09:53 +0300] "GET /img/header/top-nav-separator.png HTTP/1.1" 200 462 "https://localhost/art" "Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/34.0.1847.132 Safari/537.36"

  Read the article

• gmail dkim=neutral (no signature)

  - by Bretticus

  After testing much and retracing my steps, I still cannot get google mail to validate. My mail server is Debian 5.0 with exim Exim version 4.72 #1 built 31-Jul-2010 08:12:17 Copyright (c) University of Cambridge, 1995 - 2007 Berkeley DB: Berkeley DB 4.8.24: (August 14, 2009) Support for: crypteq iconv() IPv6 PAM Perl Expand_dlfunc GnuTLS move_frozen_messages Content_Scanning DKIM Old_Demime Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch ldap ldapdn ldapm mysql nis nis0 passwd pgsql sqlite Authenticators: cram_md5 cyrus_sasl dovecot plaintext spa Routers: accept dnslookup ipliteral iplookup manualroute queryprogram redirect Transports: appendfile/maildir/mailstore/mbx autoreply lmtp pipe smtp Fixed never_users: 0 Size of off_t: 8 GnuTLS compile-time version: 2.4.2 GnuTLS runtime version: 2.4.2 Configuration file is /var/lib/exim4/config.autogenerated My remote smtp transport configuration: remote_smtp: debug_print = "T: remote_smtp for $local_part@$domain" driver = smtp helo_data = mailer.mydomain.com dkim_domain = mydomain.com dkim_selector = mailer dkim_private_key = /etc/exim4/dkim/mailer.mydomain.com.key dkim_canon = relaxed .ifdef REMOTE_SMTP_HOSTS_AVOID_TLS hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS .endif .ifdef REMOTE_SMTP_HEADERS_REWRITE headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE .endif .ifdef REMOTE_SMTP_RETURN_PATH return_path = REMOTE_SMTP_RETURN_PATH .endif .ifdef REMOTE_SMTP_HELO_FROM_DNS helo_data=REMOTE_SMTP_HELO_DATA .endif The path to my private key is correct. I see a DKIM header in my messages as they end up in my gmail account: DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mydomain.com; s=mailer; h=Content-Type:MIME-Version:Message-ID:Date:Subject:Reply-To:To:From; bh=nKgQAFyGv<snip>tg=; b=m84lyYvX6<snip>RBBqmW52m1ce2g=; However, gmail headers always report dkim=neutral (no signature): dkim=neutral (no signature) [email protected] My DNS results: dig +short txt mailer._domainkey.mydomain.com mailer._domainkey. mydomain.com descriptive text "v=DKIM1\; k=rsa\; t=y\; p=LS0tLS1CRUdJ<snip>M0RRRUJBUVV" "BQTRHTkFEQ0J<snip>GdLamdaaG" "JwaFZkai93b3<snip>laSCtCYmdsYlBrWkdqeVExN3gxN" "mpQTzF6OWJDN3hoY21LNFhaR0NjeENMR0FmOWI4Z<snip>tLQo=" Note that the base64 public key is 364 chars long so I had to break up the key using bind9. $ORIGIN _domainkey. mydomain.com. mailer TXT ("v=DKIM1; k=rsa; t=y; p=LS0tLS1CRUdJTiBQVUJM<snip>U0liM0RRRUJBUVV" "BQTRHTkFEQ0JpUUtCZ1<snip>15MGdLamdaaG" "JwaFZkai93b3lDK21MR<snip>YlBrWkdqeVExN3gxN" "mpQTzF6OWJDN3hoY21L<snip>Ci0tLS0tRU5E" "IFBVQkxJQyBLRVktLS0tLQo=") Can anyone point me in the right direction? I would really appreciate it.

  Read the article

• JavaMail application won't send email to external SMTP server

  - by Luiz Cruz

  This is actually a question from an exam, but I believe it could help others troubleshooting a similar situation. In a system, an e-mail needs to be sent to a certain mailbox. The following Java code, which is part of a larger system, was developed for that. Assume that "example.com" corresponds to a valid registered internet domain. public void sendEmail(){ String s1=”Warning”; String b1=”Contact IT support.”; String r1=”[email protected]”; String d1=”[email protected]”; String h1=”mx.intranet”; Properties p1 = new Properties(); p1.put(“mail.host”, h1); Session session = Session.getDefaultInstance(p1, null); MimeMessage message = new MimeMessage(session); try { message.setFrom(new InternetAddress(r1)); message.addRecipient(Message.RecipientType.TO, new InternetAddress(d1)); message.setSubject(s1); message.setText(b1); Transport.send(message); } catch (MessagingException e){ System.err.println(e); } } The execution of this code, within the testing environment of an application server, does NOT work as expected. The mailbox of the "example.com" server never receives the email, even tough all string values in the code are correctly attributed. The output for the command "netstat -np TCP" in the application server during execution is shown bellow: Src Add Src Port Dest Add Dest Port State 192.168.5.5 54395 192.168.7.1 25 SYN_SENT 192.168.5.5 54390 192.168.7.1 110 TIME_WAIT 192.168.5.5 52001 200.218.208.118 80 CLOSE_WAIT 192.168.5.5 52050 200.218.208.118 80 ESTABLISHED 192.168.5.5 50001 200.255.94.202 25 TIME_WAIT 192.168.5.5 50000 200.255.94.202 25 ESTABLISHED With the exception of the lines that were NAT'd, all others are associated with the Java application server, which created them after the execution of the code above. The e-mail server used in this environment is the production server, which is online and does not require any authentication for internal connections. Based on this situation, point out three possible causes for the problem.

  Read the article

• Having trouble Getting "RTSP over HTTP"

  - by Muhammad Adeel Zahid

  There is an axis camera that is connected to our site (camba.tv) through axis one click connection component (which acts as proxy). We can communicate with this camera only through http by setting the proxy to our OCCC server's address. If we want to get RTSP streams (h.264) we are only left with "RTSP over HTTP" option. For this I have followed axis VAPIX 3 documentation section 3.3. I issue requests through fiddler but don't get any response. But when i put the URL (axrtsphttp://1.00408CBEA38B/axis-media/media.amp) in windows media player (with proxy set to OCCC server 212.78.237.156:3128) the player is able to get RTSP stream over HTTP after logging in. I have created a request trace of communication between camera and windows media player through wireshark and the request that brings the stream looks like http://1.00408cbea38b/axis-media/media.amp HTTP/1.1 x-sessioncookie: 619 User-Agent: Axis AMC Host: 1.00408CBEA38B Proxy-Connection: Keep-Alive Pragma: no-cache Authorization: Digest username="root",realm="AXIS_00408CBEA38B",nonce="000a8b40Y0100409c13ac7e6cceb069289041d8feb1691",uri="/axis-media/media.amp",cnonce="9946e2582bd590418c9b70e1b17956c7",nc=00000001,response="f3cab86fc84bfe33719675848e7fdc0a",qop="auth" HTTP/1.0 200 OK Content-Type: application/x-rtsp-tunnelled Date: Tue, 02 Nov 2010 11:45:23 GMT RTSP/1.0 200 OK CSeq: 1 Content-Type: application/sdp Content-Base: rtsp://1.00408CBEA38B/axis-media/media.amp/ Date: Tue, 02 Nov 2010 11:45:23 GMT Content-Length: 410 v=0 o=- 1288698323798001 1288698323798001 IN IP4 1.00408CBEA38B s=Media Presentation e=NONE c=IN IP4 0.0.0.0 b=AS:50000 t=0 0 a=control:* a=range:npt=0.000000- m=video 0 RTP/AVP 96 b=AS:50000 a=framerate:30.0 a=transform:1,0,0;0,1,0;0,0,1 a=control:trackID=1 a=rtpmap:96 H264/90000 a=fmtp:96 packetization-mode=1; profile-level-id=420029; sprop-parameter-sets=Z0IAKeNQFAe2AtwEBAaQeJEV,aM48gA== RTSP/1.0 200 OK CSeq: 2 Session: 3F4763D8; timeout=60 Transport: RTP/AVP/TCP;unicast;interleaved=0-1;ssrc=060922C6;mode="PLAY" Date: Tue, 02 Nov 2010 11:45:24 GMT RTSP/1.0 200 OK CSeq: 3 Session: 3F4763D8 Range: npt=0- RTP-Info: url=rtsp://1.00408CBEA38B/axis-media/media.amp/trackID=1;seq=7392;rtptime=4190934902 Date: Tue, 02 Nov 2010 11:45:24 GMT [Binary Stream Content] But when i copy this request to fiddler, I only get 200 status code with content-type set to application/x-rtsp-tunneled and there is no stream data. The only thing i do different with stream is to use Basic in authorization header instead of Digest and I do not get 401 (Un authorized) status code. Can anyone explain what's happening here? How can I write request sequences to get stream in fiddler? If it is needed, I can upload the wireshark request dump somewhere.

  Read the article

• solved: puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work? Update I added verbose logging to the puppet master and restarted nginx; here's the additional info I see in logs Mon Dec 10 18:19:15 +0530 2012 Puppet (err): Could not resolve 10.209.47.31: no name for 10.209.47.31 Mon Dec 10 18:19:15 +0530 2012 access[/] (info): defaulting to no access for 10.209.47.31 Mon Dec 10 18:19:15 +0530 2012 Puppet (warning): Denying access: Forbidden request: 10.209.47.31(10.209.47.31) access to /file_metadata/plugins [find] at :111 Mon Dec 10 18:19:15 +0530 2012 Puppet (err): Forbidden request: 10.209.47.31(10.209.47.31) access to /file_metadata/plugins [find] at :111 10.209.47.31 - - [10/Dec/2012:18:19:15 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" On the agent machine facter fqdn and hostname both return a fully qualified host name [amisr1@blramisr195602 ~]$ sudo facter fqdn blramisr195602.XXXXXXX.com I then updated the agent configuration to add dns_alt_names = 10.209.47.31 cleaned all certificates on master and agent and regenerated the certificates and signed them on master using the option --allow-dns-alt-names [amisr1@bangvmpllDA02 ~]$ sudo puppet cert sign blramisr195602.XXXXXX.com Error: CSR 'blramisr195602.XXXXXX.com' contains subject alternative names (DNS:10.209.47.31, DNS:blramisr195602.XXXXXX.com), which are disallowed. Use `puppet cert --allow-dns-alt-names sign blramisr195602.XXXXXX.com` to sign this request. [amisr1@bangvmpllDA02 ~]$ sudo puppet cert --allow-dns-alt-names sign blramisr195602.XXXXXX.com Signed certificate request for blramisr195602.XXXXXX.com Removing file Puppet::SSL::CertificateRequest blramisr195602.XXXXXX.com at '/var/lib/puppet/ssl/ca/requests/blramisr195602.XXXXXX.com.pem' however, that doesn't help either; I get same errors as before. Not sure why in the logs it shows comparing access rules by IP and not hostname. Is there any Nginx configuration to change this behavior?

  Read the article

• Bladecenter-E Power Module fault

  - by Lihnjo

  We have problem on IBM Bladecenter-E Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy What is the best solution for this problem? Thanks AMM Service Data Help SPAPP Capture Available 10/13/2010 17:03:47 1090347 bytes Time: 11/19/2012 11:02:31 UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 MAC Address xx:xx:xx:xx:xx:xx MM Information Name: nnnnn Contact: aaa, bbb, ccc, England Location: [email protected] IP address: 111.222.333.444 Date Time Information GMT offset: +1:00 - Central Europe Time (Western Europe, Algeria, Nigeria, Angola) Adjust for DST: Yes NTP: Enabled NTP Hostname/IP: 111.222.333.444 System Health: Critical System Status Summary One or more monitored parameters are abnormal. Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy CHASSIS (BladeCenter-E) in CHASSIS slot: 01 TopoPath is "CHASSIS[1]". Description : BladeCenter-E Width : 1 Sub Type : BladeCenter (BC) Power Mode : 220 v KVM Owner : CHASSIS[1]/BLADE[9] MT Owner : CHASSIS[1]/MGMT_MOD[1] Component Type : CHASSIS Inventory: VPD ID: 336 (decimal) POS ID EXT: 0 (decimal) POS ID: 8 (decimal) Machine Type/Model: 86773RG Machine Serial Number: 99ZL816 Part Number: 39R8561 FRU Number: 39R8563 FRU Serial Number: YK109174W1HV Manufacturer ID: IBM Hardware Revision: 3 (decimal) Manufacture Date: 18 (wk), 07 (yr) UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 (hex) Type Code: 97 (decimal) Sub-type Code: 0 (decimal) IANA Num: 336 (decimal) Product ID: 8 (decimal) Manufacturer Sub ID: FOXC Enviroment data: -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0xa Sensor Label: : Midplane Sensor ID: : 0x0 MGMT MOD (Advanced Management Module) in MGMT_MOD slot: 01 TopoPath is "CHASSIS[1]/MGMT_MOD[1]". Description : Advanced Management Module Name : kant Width : 1 Component Role : Primary Component Type : MGMT MOD Insert Time : 28050132 Inventory: VPD ID: 288 (decimal) POS ID EXT: 0 (decimal) POS ID: 4 (decimal) Part Number: 39Y9659 FRU Number: 39Y9661 FRU Serial Number: YK11836CE2RC Manufacturer ID: IBM Hardware Revision: 4 (decimal) Manufacture Date: 50 (wk), 06 (yr) UUID: 1D95 9937 8CA5 11DB 9499 0014 5EDF 1C98 (hex) Type Code: 81 (decimal) Sub-type Code: 1 (decimal) IANA Num: 20301 (decimal) Product ID: 65 (decimal) Manufacturer Sub ID: ASUS Firmware data: Type : AMM firmware Build ID : BPET50P File Name : CNETCMUS.PKT Release Date : 03/26/2010 Release Level : 50 Revision - Major: 80 Port info: ======================================================== Topology Path ID : 1 Label : External Phy Orientation : EXTERNAL Port Number : 1 Type : MGT Physical Meidum : Copper Number of Link Intferfaces : 1 ------------------------------------ Link Ifc ID Number : 1 Link Ifc Transport Protocol : ENET Link Ifc Addr Type : MAC Link Ifc Burned-in Addr : xx:xx:xx:xx:xx:xx Link Ifc Admin Addr : 00:00:00:00:00:00 Link Ifc Addr in use : xx:xx:xx:xx:xx:xx ---------------------------------------------------------- Configuration behaviors: Save Only Enviroment data: -------------- Type: : TEMPERATURE Unit: : DEGREES_C Reading: : 38.00 Sensor Label: : MM Ambient Sensor ID: : 0x0 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +4.81 Sensor Label: : +5V Sensor ID: : 0x1b -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +3.26 Sensor Label: : +3.3V Sensor ID: : 0x19 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +11.97 Sensor Label: : +12V Sensor ID: : 0x16 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : -4.88 Sensor Label: : -5V Sensor ID: : 0x1e -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +2.47 Sensor Label: : +2.5V Sensor ID: : 0x18 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +1.76 Sensor Label: : +1.8V Sensor ID: : 0x15 -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0x19 Sensor Label: : kant Sensor ID: : 0x0

  Read the article

• Windows 7 playback of dvr-Microsoft files stutters

  - by Jim Lynn

  I've just had to install Windows 7 on my Media Center machine because my Vista installation had a faulty drive. I've got the latest drivers that I can find - Intel 945GM integrated Graphics, Realtek audio drivers. Things are working OK with one exception. Playback of old recordings, from dvr-Microsoft format files, is choppy. The picture freezes for a fraction of a second, then quickly catches up. The sound is uninterrupted and doesn't pause. These freezes happen once every 5 seconds or so. It's very regular. Playback of Live TV from the digital tuner is perfectly smooth. DVD playback is perfectly smooth. As an experiment, I used the MPEG editing package VideoReDo to create a small test file in three different formats. This program takes the raw MPEG streams and repackages them into the desired container. I took the same clip and created three files in three formats: dvr-Microsoft (Microsoft's old recorded TV format); mpg (standard MPEG); and ts (raw MPEG transport stream of the kind often produced by PVRs). When these three files are played back under Windows 7, the mpg and ts files play smoothly, but the dvr-Microsoft file stutters. The last piece of data I have is that two other Windows 7 machines can play back dvr-Microsoft files smoothly with no stuttering. One is a netbook, with less grunt than the media centre. So there must be something specific about my Media Center machine that's causing the problem. Does anyone have any idea where I can look now? I don't know much about AV software, codecs, filter graphs etc. but I suspect that's where the problem lies. Rendering the video isn't the problem, but extracting the streams is. How would I go about diagnosing the problem? Edited to add: I just used the GraphStudio tool to look at the filter graph on the offending PC. The filter graph it uses by default for dvr-Microsoft looks identical to the other machines, and, interestingly, when I play the files using GraphStudio they run smoothly. Under Windows Media Player and Windows Media Center they stutter. I'd like to see the filter graph for Windows Media Player but GraphStudio won't show it. It looks like Windows Media Player and WMC are using a different decoding path to GraphStudio. Edited again to add: Today I purchased a new HDTV. The same Media Center driving the TV at 1080p is now playing back the old Recorded TV files smoothly, without stuttering. So whatever the cause of the original problem, using a different resolution seems to have removed the problem. It might also explain why nobody else has had this problem. I doubt many people use Media Centre with a 14in portable TV.

  Read the article

• Setting up a very mixed Active Directory network to work with PowerShell Remote Administration

  - by erictheavg

  Summary: I want to be able to monitor the computers on my network, but don't need it to be automated. We're too small to purchase anything like MOM, but too big to do anything manually (~100 machines in two locations). I just keep running into issues, and was wondering if there's a master list of Group Policy settings I can distribute to my environment to get Remote Powershell working. Environment: Our AD network is pretty mixed. The end users have XP SP3, Win 7, and Win 7 x64. The servers include Win2k3 SP2, Win2k8, Win2k8 x64, Win2k8 R2, and Win2k8 R2 x64. Details: I'm trying to get it to work with Remote Powershell, but I run into errors like the following: Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Default authentication may be used with an IP address under the following conditions: the transport is HTTPS or the destination is in the TrustedHosts list, and explicit credentials are provided. Use winrm.cmd to configure TrustedHosts. Note that computers in the TrustedHosts list might not be authenticated. For more information on how to set TrustedHosts run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo : OpenError: (:) [], PSRemotingTransportException + FullyQualifiedErrorId : PSSessionStateBroken Then I go to the computer (Win2k3 SP2 server) and run winrm quickconfig per the recommendations via google, and it says: Make these changes [y/n]? y WinRM has been updated to receive requests. WinRM service started. WSManFault Message = The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". Error number: -2144108526 0x80338012 The client cannot connect to the destination specified in the request. Verify that the service on the destination is running and is accepting requests. Consult the logs and documentation for the WS-Management service running on the destination, most commonly IIS or WinRM. If the destination is the WinRM service, run the following command on the destination to analyze and configure the WinRM service: "winrm quickconfig". That's right. It tells me to remedy my winrm quickconfig failure by running winrm quickconfig. I don't want to band-aid this project one google search at a time. I'm sure there is a step-by-step tutorial out there on how to set up a network for powershell remote administration. Does anyone know of one? Books are acceptable. Thanks in advance! I didn't think my question would get this long.

  Read the article

• postfix error: open database /var/lib/mailman/data/aliases.db: No such file

  - by Thufir

  In trying to follow the Ubuntu guide for postfix and mailman, I do not understand these directions: This build of mailman runs as list. It must have permission to read /etc/aliases and read and write /var/lib/mailman/data/aliases. Do this with these commands: sudo chown root:list /var/lib/mailman/data/aliases sudo chown root:list /etc/aliases Save and run: sudo newaliases I'm getting this kind of error: root@dur:~# root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo dur 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 01:16:43 dur postfix/master[19444]: terminating on signal 15 Aug 28 01:16:43 dur postfix/postfix-script[19558]: starting the Postfix mail system Aug 28 01:16:43 dur postfix/master[19559]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:16:45 dur postfix/postfix-script[19568]: stopping the Postfix mail system Aug 28 01:16:45 dur postfix/master[19559]: terminating on signal 15 Aug 28 01:16:45 dur postfix/postfix-script[19673]: starting the Postfix mail system Aug 28 01:16:45 dur postfix/master[19674]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:17:22 dur postfix/smtpd[19709]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1] Aug 28 01:18:37 dur postfix/smtpd[19709]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# root@dur:~# And am wondering what connection might be. I do see that I don't have the requisite files: root@dur:~# root@dur:~# ll /var/lib/mailman/data/aliases ls: cannot access /var/lib/mailman/data/aliases: No such file or directory root@dur:~# At what stage were those aliases created? How can I create them? Is that what's causing the error error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1]?

  Read the article

• Exchange 2007 Standard Edition

  - by Phrontiste

  We Have : Exchange 2007 Standard Edition IBM System X3650 2 x Intel Xeon 5430 2.66 GHz Version 8.1 Build 240.6 Mailbox, Hub Transport, Client Access Role Installed on One Box Total Number of Mailboxes : 110 - 130 6 Physical Disks Disk 0,1 (68 GB) = Raid-1, OS Partition ( C: Partition) Disk 2,3 (279GB) = Raid-1, Exchange Database (First and Second Storage Groups) ( D: Partition ) Disk 4,5 (68 GB) = Raid-1, Exchange Transaction Logs ( E: Partition ) Setup: Storage Groups : D:\First Storage group\Mailbox database.edb Storage Groups : D:\Second Storage Group\Public Folder Database.edb Transaction Logs : E Partition Problem 1: On our D Partition (Mailbox Database Partition), total size is 279 GB, free space remaining is 64.7 GB, when I select the first storage group and second storage group folders and right click properties they report a size of 165 GB. Mailbox database reports a size of 157GB when right clicked Properties. where as the size displayed in the folder is 164,893,456 KB So, we are missing around 50-54 GB, there is nothing else on these drives, no page file, nothing at all. The partition housing the Transaction logs is reporting the sizes accurately. Any suggestions / fixes on the above ? Problem 2: As you may have already read in Problem 1, the size of the mailbox database is 157GB or 164GB reported; which is not recommended, a) What would you suggest we should do to divide mailboxes in storage groups on this same server ? b) How would we move mailboxes into different storage groups ? c) This is the information store size ? (Am I right in thinking that this is not recommended) d) Having multiple storage groups with one Mailbox DB in each, would that reduce the size of the Information Store? e) Any suggestions / how-to reduce the size of information store ? We didn't install this, we have inherited this - what other recommendations you can make in order to keep ourselves better prepared for any server disaster? We are backing up with Yosemite Backup on RD1000 (320GB) at the moment, which is backing up successfully, flushing the logs daily. We haven't done a test restore YET. I have tried to provide as much info as possible, please let me know if you need further info. Also, we haven't yet faced any problems in mailflow, access speeds, everything is working fine, we have two to five people accessing OWA or Outlook via vpn only. Thanks for your time to read the above - will look forward to your expert suggestions.

  Read the article

• Centos does not open port/s after the rule/s are appended

  - by Charlie Dyason

  So after some battling and struggling with the firewall, i see that I may be doing something or the firewall isnt responding correctly there is has a port filter that is blocking certain ports. by the way, I have combed the internet, posted on forums, done almost everything and now hence the website name "serverfault", is my last resort, I need help What I hoped to achieve is create a pptp server to connect to with windows/linux clients UPDATED @ bottom Okay, here is what I did: I made some changes to my iptables file, giving me endless issues and so I restored the iptables.old file contents of iptables.old: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT after iptables.old restore(back to stock), nmap scan shows: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:54 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 997 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.95 seconds if I append rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:58 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.77 seconds *notice it allows and opens port 443 but no other ports, and it removes port 113...? removing previous rule and if I append rule: (allow and open port 80 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:01 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.12 seconds *notice it removes port 443 and allows 80 but is closed without removing previous rule and if I append rule: (allow and open port 1723 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:05 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.16 seconds *notice no change in ports opened or closed??? after removing rules: iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 998 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident Nmap done: 1 IP address (1 host up) scanned in 5.15 seconds and returning rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.87 seconds notice the eth0 changes the 999 filtered ports to 858 filtered ports, 139 closed ports QUESTION: why cant I allow and/or open a specific port, eg. I want to allow and open port 443, it doesnt allow it, or even 1723 for pptp, why am I not able to??? sorry for the layout, the editor was give issues (aswell... sigh) UPDATE @Madhatter comment #1 thank you madhatter in my iptables file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT # ----------all rules mentioned in post where added here ONLY!!!---------- -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT if I want to allow and open port 1723 (or edit iptables to allow a pptp connection from remote pc), what changes would I make? (please bear with me, my first time working with servers, etc.) Update MadHatter comment #2 iptables -L -n -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 9 660 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 3 0 0 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 4 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 6 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT 6 packets, 840 bytes) num pkts bytes target prot opt in out source destination just on a personal note, madhatter, thank you for the support , I really appreciate it! UPDATE MadHatter comment #3 here are the interfaces ifconfig eth0 Link encap:Ethernet HWaddr 00:1D:D8:B7:1F:DC inet addr:[server ip] Bcast:[server ip x.x.x].255 Mask:255.255.255.0 inet6 addr: fe80::21d:d8ff:feb7:1fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36692 errors:0 dropped:0 overruns:0 frame:0 TX packets:4247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2830372 (2.6 MiB) TX bytes:427976 (417.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) remote nmap nmap -p 1723 [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-01 16:17 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). PORT STATE SERVICE 1723/tcp filtered pptp Nmap done: 1 IP address (1 host up) scanned in 0.51 seconds local nmap nmap -p 1723 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-01 16:19 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000058s latency). Other addresses for localhost (not scanned): 127.0.0.1 PORT STATE SERVICE 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.11 seconds UPDATE MadHatter COMMENT POST #4 I apologize, if there might have been any confusion, i did have the rule appended: (only after 3rd post) iptables -A INPUT -p tcp --dport 1723 -j ACCEPT netstat -apn|grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1142/pptpd There are not VPN's and firewalls between the server and "me" UPDATE MadHatter comment #5 So here is an intersting turn of events: I booted into windows 7, created a vpn connection, went through the verfication username & pword - checking the sstp then checking pptp (went through that very quickly which meeans there is no problem), but on teh verfication of username and pword (before registering pc on network), it got stuck, gave this error Connection failed with error 2147943625 The remote computer refused the network connection netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - I do not know what it means but seems like there is progress..., any thoughts???

  Read the article

• EC2 instance suddenly refusing SSH connections and won't respond to ping

  - by Chris

  My instance was running fine and this morning I was able to access a Ruby on Rails app hosted on it. An hour later I suddenly wasn't able to access my site, my SSH connection attempts were refused and the server wasn't even responding to ping. I didn't change anything on my system during that hour and reboots aren't fixing it. I've never had any problems connecting or pinging the system before. Can someone please help? This is on my production system! OS: CentOS 5 AMI ID: ami-10b55379 Type: m1.small [] ~% ssh -v *****@meeteor.com OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to meeteor.com [184.73.235.191] port 22. debug1: connect to address 184.73.235.191 port 22: Connection refused ssh: connect to host meeteor.com port 22: Connection refused [] ~% ping meeteor.com PING meeteor.com (184.73.235.191): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 ^C --- meeteor.com ping statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss [] ~% ========= System Log ========= Restarting system. Linux version 2.6.16-xenU ([email protected]) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) #1 SMP Mon May 28 03:41:49 SAST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000006a400000 (usable) 980MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active IRQ lockup detection disabled Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2599.998 MHz processor. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB disabled vmalloc area: ee000000-f53fe000, maxmem 2d7fe000 Memory: 1718700k/1748992k available (1958k kernel code, 20948k reserved, 620k data, 144k init, 1003528k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5202.30 BogoMIPS (lpj=26011526) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Checking 'hlt' instruction... OK. Brought up 1 CPUs migration_cost=0 Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs xen_mem: Initialising balloon driver. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Xen virtual console successfully installed as tty1 Event-channel device installed. netfront: Initialising virtual ethernet driver. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 Registering block device major 8 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 Using IPI No-Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5Pausing... 4Pausing... 3Pausing... 2Pausing... 1Continuing... INIT: version 2.86 booting Welcome to CentOS release 5.4 (Final) Press 'I' to enter interactive startup. Setting clock : Fri Oct 1 14:35:26 EDT 2010 [ OK ] Starting udev: [ OK ] Setting hostname localhost.localdomain: [ OK ] No devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 275424/1310720 files, 1161123/2621440 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] INIT: Entering runlevel: 4 Entering non-interactive startup Starting background readahead: [ OK ] Applying ip6tables firewall rules: modprobe: FATAL: Module ip6_tables not found. ip6tables-restore v1.3.5: ip6tables-restore: unable to initializetable 'filter' Error occurred at line: 3 Try `ip6tables-restore -h' or 'ip6tables-restore --help' for more information. [FAILED] Applying iptables firewall rules: [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... done. [ OK ] Starting auditd: [FAILED] Starting irqbalance: [ OK ] Starting portmap: [ OK ] FATAL: Module lockd not found. Starting NFS statd: [ OK ] Starting RPC idmapd: FATAL: Module sunrpc not found. FATAL: Error running install command for sunrpc Error: RPC MTAB does not exist. Starting system message bus: [ OK ] Starting Bluetooth services:[ OK ] [ OK ] Can't open RFCOMM control socket: Address family not supported by protocol Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Can't open HIDP control socket: Address family not supported by protocol [FAILED] Starting autofs: Starting automount: automount: test mount forbidden or incorrect kernel protocol version, kernel protocol version 5.00 or above required. [FAILED] [FAILED] Starting sshd: [ OK ] Starting cups: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting console mouse services: no console device found[FAILED] Starting crond: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 390 100 390 0 0 58130 0 --:--:-- --:--:-- --:--:-- 58130 100 390 100 390 0 0 56984 0 --:--:-- --:--:-- --:--:-- 0 Starting yum-updatesd: [ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting OSSEC: [ OK ] Starting smartd: [ OK ] c CentOS release 5.4 (Final) Kernel 2.6.16-xenU on an i686 domU-12-31-39-00-C4-97 login: INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes

  Read the article

• StrongSwan + xl2tpd client timeout between 2-5 minutes

  - by Howard Guo

  I run CentOS 6.4 on Amazon EC2, using xl2tpd-1.3.1 from EPEL repository together with StrongSwan 5.0.4. I setup a simple IPSec connection: conn l2tp type=transport keyexchange=ikev1 rekey=no authby=psk leftsubnet=0.0.0.0/0 rightsubnet=0.0.0.0/0 compress=yes auto=add And here is xl2tpd.conf: [global] ipsec saref = yes [lns default] ip range = 192.168.0.2-192.168.0.250 local ip = 192.168.0.1 ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes Here is options.xl2tpd: ms-dns 8.8.4.4 auth lock debug proxyarp There is only one client - Android 4.2 Android connects successfully: Oct 27 19:45:02 ip-172-31-17-30 xl2tpd[2706]: Connection established to x.x.x.x, 59578. Local: 18934, Remote: 29291 (ref=0/0). LNS session is 'default' Oct 27 19:45:02 ip-172-31-17-30 xl2tpd[2706]: Call established with x.x.x.x, Local: 36452, Remote: 29845, Serial: -1369754322 Oct 27 19:45:02 ip-172-31-17-30 pppd[2709]: pppd 2.4.5 started by howard, uid 0 Oct 27 19:45:02 ip-172-31-17-30 pppd[2709]: Using interface ppp0 Oct 27 19:45:02 ip-172-31-17-30 pppd[2709]: Connect: ppp0 <--> /dev/pts/0 Oct 27 19:45:02 ip-172-31-17-30 pppd[2709]: peer from calling number x.x.x.x authorized Oct 27 19:45:02 ip-172-31-17-30 pppd[2709]: Deflate (15) compression enabled Oct 27 19:45:03 ip-172-31-17-30 pppd[2709]: Cannot determine ethernet address for proxy ARP Oct 27 19:45:03 ip-172-31-17-30 pppd[2709]: local IP address 192.168.0.1 Oct 27 19:45:03 ip-172-31-17-30 pppd[2709]: remote IP address 192.168.0.2 Oct 27 19:45:03 ip-172-31-17-30 charon: 06[KNL] 192.168.0.1 appeared on ppp0 Oct 27 19:45:03 ip-172-31-17-30 charon: 06[KNL] 192.168.0.1 disappeared from ppp0 Oct 27 19:45:03 ip-172-31-17-30 charon: 06[KNL] 192.168.0.1 appeared on ppp0 Oct 27 19:45:03 ip-172-31-17-30 charon: 06[KNL] interface ppp0 activated In the meanwhile, Internet works perfectly on the Android client, the VPN connection is stable and fast. However, it always happens that within 2-5 minutes after the connection is established: Oct 27 19:47:07 ip-172-31-17-30 xl2tpd[2706]: Maximum retries exceeded for tunnel 18934. Closing. Oct 27 19:47:07 ip-172-31-17-30 xl2tpd[2706]: Connection 29291 closed to 95.91.227.224, port 59578 (Timeout) Oct 27 19:47:07 ip-172-31-17-30 charon: 06[KNL] interface ppp0 deactivated Oct 27 19:47:07 ip-172-31-17-30 charon: 06[KNL] interface ppp0 deleted Then the VPN connection is broken. So what might have gone wrong? The same L2TP service works flawlessly on iOS 7, MacOS 10.8, and Windows 7, there is no disconnection issue on those OSes. Thank you!

  Read the article

• Making application behind reverse proxy aware of https

  - by akaIDIOT

  https in tomcat being the hassel it is, I've been trying to get an Axis2 webapp to work behind a reverse proxy for ages now, can't seem to get it to work. The proxying itself works like a charm, but the app fails to generate 'links' (or ports as it concerns SOAP) using https. It would seem I need some way to let Axis2 know it is being accessed through https, even though the actual transport to it is done over http (proxied from localhost). The nginx config that proxies https to localhost:8080: server { listen 443; server_name localhost; ssl on; ssl_certificate /path/to/.pem ssl_certificate_key /path/to/.key; ssl_session_timeout 5m; ssl_protocols SSLv3 TLSv1; ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; ssl_prefer_server_ciphers on; location / { # force some http-headers (avoid confusing tomcat) proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto https; # pass requests to local tomcat server listening on default port 8080 proxy_pass http://localhost:8080; } } The proxy itself works fine, the info pages of the webapp work. The problem lies in the ports generated in the .wsdl: <wsdl:service name="WebService"> <wsdl:port name="WebServiceHttpSoap11Endpoint" binding="ns:WebServiceSoap11Binding"> <soap:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpSoap11Endpoint/"/> </wsdl:port> <wsdl:port name="WebServiceHttpSoap12Endpoint" binding="ns:WebServiceSoap12Binding"> <soap12:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpSoap12Endpoint/"/> </wsdl:port> <wsdl:port name="WebServiceHttpEndpoint" binding="ns:WebServiceHttpBinding"> <http:address location="http://10.10.3.96/axis2/services/WebService.WebServiceHttpEndpoint/"/> </wsdl:port> </wsdl:service> The Host header does its job; it shows 10.10.3.96 in stead of localhost, but as the snippet shows: it says http:// in front of it in stead of https://. My client app can't deal with this... Adding proxyPort and proxyName to the tomcat6 server.xml in the default <Connector> doesn't help; I'm at a loss on how to get this to work properly.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Ubuntu unattended-upgrades stops apache

  - by Robbie

  This morning i was alerted to the fact that both apache instances serving my app were not responding to requests from my load balancer. I attempted apachectl restart and it said apache was not running. So, i started apache on both instances and got the service up again. I then followed the logs and worked out that both had performed upgrades via the unattended-upgrades package moments before they stopped responding. /var/log/unattended-upgrades/unattended-upgrades.log 2013-07-02 06:30:51,875 INFO Starting unattended upgrades script 2013-07-02 06:30:51,875 INFO Allowed origins are: ['o=Ubuntu,a=precise-security'] 2013-07-02 06:33:57,771 INFO Packages that are upgraded: accountsservice apache2 apache2-mpm-prefork apache2-utils apache2.2-bin apache2.2-common apparmor apport apt apt-transport-https apt-utils bind9-host binutils dbus dnsutils gnupg gpgv isc-dhcp-client isc-dhcp-common krb5-locales libaccountsservice0 libapt-inst1.4 libapt-pkg4.12 libbind9-80 libc-bin libc-dev-bin libc6 libc6-dev libcurl3-gnutls libdbus-1-3 libdbus-glib-1-2 libdns81 libdrm-intel1 libdrm-nouveau1a libdrm-radeon1 libdrm2 libexpat1 libfreetype6 libgc1c2 libgnutls-dev libgnutls-openssl27 libgnutls26 libgnutlsxx27 libisc83 libisccc80 libisccfg82 liblwres80 libruby1.8 libx11-6 libx11-data libxcb1 libxext6 libxml2 linux-firmware linux-image-virtual linux-libc-dev linux-virtual multiarch-support openssl perl perl-base perl-modules python-apport python-crypto python-keyring python-problem-report python-software-properties ri1.8 ruby1.8 ruby1.8-dev sudo tzdata update-manager-core 2013-07-02 06:33:57,772 INFO Writing dpkg log to '/var/log/unattended-upgrades/unattended-upgrades-dpkg_2013-07-02_06:33:57.772399.log' 2013-07-02 06:36:10,584 INFO All upgrades installed I'm running Ubuntu 12.04 on Amazon EC2 servers. I have unattended-upgrades installed and configured as follows: /etc/apt/apt.conf.d/50unattended-upgrades // Automatically upgrade packages from these (origin:archive) pairs Unattended-Upgrade::Allowed-Origins { "${distro_id}:${distro_codename}-security"; // "${distro_id}:${distro_codename}-updates"; // "${distro_id}:${distro_codename}-proposed"; // "${distro_id}:${distro_codename}-backports"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { }; /etc/apt/apt.conf.d/20auto-upgrades APT::Periodic::Update-Package-Lists "1"; APT::Periodic::Unattended-Upgrade "1"; I've struggled to find documentation about what happens to running processes during an upgrade. - Is this expected behaviour? Or should unattended-upgrades restart apache after upgrading it? - What can I do to ensure apache is restarted correctly? Should I just blacklist the apache package?

  Read the article

• What to filter when providing very limited open WiFi to a small conference or meeting?

  - by Tim Farley

  Executive Summary The basic question is: if you have a very limited bandwidth WiFi to provide Internet for a small meeting of only a day or two, how do you set the filters on the router to avoid one or two users monopolizing all the available bandwidth? For folks who don't have the time to read the details below, I am NOT looking for any of these answers: Secure the router and only let a few trusted people use it Tell everyone to turn off unused services & generally police themselves Monitor the traffic with a sniffer and add filters as needed I am aware of all of that. None are appropriate for reasons that will become clear. ALSO NOTE: There is already a question concerning providing adequate WiFi at large (500 attendees) conferences here. This question concerns SMALL meetings of less than 200 people, typically with less than half that using the WiFi. Something that can be handled with a single home or small office router. Background I've used a 3G/4G router device to provide WiFi to small meetings in the past with some success. By small I mean single-room conferences or meetings on the order of a barcamp or Skepticamp or user group meeting. These meetings sometimes have technical attendees there, but not exclusively. Usually less than half to a third of the attendees will actually use the WiFi. Maximum meeting size I'm talking about is 100 to 200 people. I typically use a Cradlepoint MBR-1000 but many other devices exist, especially all-in-one units supplied by 3G and/or 4G vendors like Verizon, Sprint and Clear. These devices take a 3G or 4G internet connection and fan it out to multiple users using WiFi. One key aspect of providing net access this way is the limited bandwidth available over 3G/4G. Even with something like the Cradlepoint which can load-balance multiple radios, you are only going to achieve a few megabits of download speed and maybe a megabit or so of upload speed. That's a best case scenario. Often it is considerably slower. The goal in most of these meeting situations is to allow folks access to services like email, web, social media, chat services and so on. This is so they can live-blog or live-tweet the proceedings, or simply chat online or otherwise stay in touch (with both attendees and non-attendees) while the meeting proceeds. I would like to limit the services provided by the router to just those services that meet those needs. Problems In particular I have noticed a couple of scenarios where particular users end up abusing most of the bandwidth on the router, to the detriment of everyone. These boil into two areas: Intentional use. Folks looking at YouTube videos, downloading podcasts to their iPod, and otherwise using the bandwidth for things that really aren't appropriate in a meeting room where you should be paying attention to the speaker and/or interacting.At one meeting that we were live-streaming (over a separate, dedicated connection) via UStream, I noticed several folks in the room that had the UStream page up so they could interact with the meeting chat - apparently oblivious that they were wasting bandwidth streaming back video of something that was taking place right in front of them. Unintentional use. There are a variety of software utilities that will make extensive use of bandwidth in the background, that folks often have installed on their laptops and smartphones, perhaps without realizing.Examples: Peer to peer downloading programs such as Bittorrent that run in the background Automatic software update services. These are legion, as every major software vendor has their own, so one can easily have Microsoft, Apple, Mozilla, Adobe, Google and others all trying to download updates in the background. Security software that downloads new signatures such as anti-virus, anti-malware, etc. Backup software and other software that "syncs" in the background to cloud services. For some numbers on how much network bandwidth gets sucked up by these non-web, non-email type services, check out this recent Wired article. Apparently web, email and chat all together are less than one quarter of the Internet traffic now. If the numbers in that article are correct, by filtering out all the other stuff I should be able to increase the usefulness of the WiFi four-fold. Now, in some situations I've been able to control access using security on the router to limit it to a very small group of people (typically the organizers of the meeting). But that's not always appropriate. At an upcoming meeting I would like to run the WiFi without security and let anyone use it, because it happens at the meeting location the 4G coverage in my town is particularly excellent. In a recent test I got 10 Megabits down at the meeting site. The "tell people to police themselves" solution mentioned at top is not appropriate because of (a) a largely non-technical audience and (b) the unintentional nature of much of the usage as described above. The "run a sniffer and filter as needed" solution is not useful because these meetings typically only last a couple of days, often only one day, and have a very small volunteer staff. I don't have a person to dedicate to network monitoring, and by the time we got the rules tweaked completely the meeting will be over. What I've Got First thing, I figured I would use OpenDNS's domain filtering rules to filter out whole classes of sites. A number of video and peer-to-peer sites can be wiped out using this. (Yes, I am aware that filtering via DNS technically leaves the services accessible - remember, these are largely non-technical users attending a 2 day meeting. It's enough). I figured I would start with these selections in OpenDNS's UI: I figure I will probably also block DNS (port 53) to anything other than the router itself, so that folks can't bypass my DNS configuration. A savvy user could get around this, because I'm not going to put a lot of elaborate filters on the firewall, but I don't care too much. Because these meetings don't last very long, its probably not going to be worth the trouble. This should cover the bulk of the non-web traffic, i.e. peer-to-peer and video if that Wired article is correct. Please advise if you think there are severe limitations to the OpenDNS approach. What I Need Note that OpenDNS focuses on things that are "objectionable" in some context or another. Video, music, radio and peer-to-peer all get covered. I still need to cover a number of perfectly reasonable things that we just want to block because they aren't needed in a meeting. Most of these are utilities that upload or download legit things in the background. Specifically, I'd like to know port numbers or DNS names to filter in order to effectively disable the following services: Microsoft automatic updates Apple automatic updates Adobe automatic updates Google automatic updates Other major software update services Major virus/malware/security signature updates Major background backup services Other services that run in the background and can eat lots of bandwidth I also would like any other suggestions you might have that would be applicable. Sorry to be so verbose, but I find it helps to be very, very clear on questions of this nature, and I already have half a solution with the OpenDNS thing.

  Read the article

• Postfix: How to apply header_checks only for specific Domains?

  - by Lukas

  Basically what I want to do is rewriting the From: Header, using header_checks, but only if the mail goes to a certain domain. The problem with header_check is, that I can't check for a combination of To: and From: Headers. Now I was wondering if it was possible to use the header_checks in combination with smtpd_restriction_classes or something similar. I've found a lot information about header_checks and multiple header fields, when searching the net. All of them basically telling me, that one can't combine two header for checking. But I didn't find any information if it was possible to only do a header check if a condition (eg. mail goes to example.com) was met. Edit: While doing some more Research I've found the following article which suggests to add a Service in postfix master.cf, use a transportmap to pass mails for the Domain to that service and have a separate header_check defined with -o. The thing is that I can't get it to work... What I did so far is adding the Service to the master.cf: example unix - - n - - smtpd -o header_checks=regexp:/etc/postfix/check_headers_example Adding the followin Line to the transportmap: example.com example: Last but not least I have two regexp-files for header checks, one for the newly added service, and one to redirect answers to the rewritten domain. check_headers_example: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 Obviously if someone answers, the mail would go to nirvana, so I have the following check_headers defined in the main postfix process: /To:(.*)<(.*)@mydomain.example.com>(.*)/ REDIRECT [email protected]$2 Somehow the Transport is ignored. Any help is appreciated. Edit 2: I'm still stuck... I did try the following: smtpd_restriction_classes = header_rewrite header_rewrite = regexp:/etc/postfix/rewrite_headers_domain smtpd_recipient_restrictions = (some checks) check_recipient_access hash:/etc/postfix/rewrite_table, (more checks) In the rewrite_table the following entries exist: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 All it gets me is a NOQUEUE: reject: 451 4.3.5 Server configuration error. I couldn't find any resources on how you would do that but some people saying it wasn't possible. Edit 3: The reason I asked this question was, that we have a customer (lets say customer.com) who uses some aliases that will forward mail to a domain, let's say example.com. The mailserver at example.com does not accept any mail from an external server that come from a sender @example.com. So all mails that are written from example.com to [email protected] will be rejected in the end. An exception on example.com's mailserver is not possible. We didn't really solve this problem, but will try to work around it by using lists (mailman) instead of aliases. This is not really nice though, nor a real solution. I'd appreciate all suggestions how this could be done in a proper way.

  Read the article

• Tomcat and IIS 7 both on different ip's and different ports

  - by n00b

  I have Tomcat and IIS 7 installed together on a Windows 2008 server. The machine has two IPs (134.133.1.1 and 134.133.2.2). I want Tomcat to handle 134.133.1.1, on port 80, and IIS to handle both 134.133.2.2, on port 80 AND 134.133.1.1, on port 443, but can't seem to get the last two together (I can get one or the other by themselves on IIS, along with the first IP address on Tomcat). I have configured Tomcat to successfully listen to ip 134.133.1.1, on port 80 with this configuration; <Connector port="80" protocol="HTTP/1.1" address="134.133.1.1" connectionTimeout="20000" redirectPort="8443" /> I also have a site configured in IIS bound to ip 134.133.1.1, on port 443 (SSL). When I turn on IIS, after Tomcat, I can reach both 134.133.1.1:80 (Tomcat) and 134.133.1.1:443 (IIS) successfully (as desired). The problem now comes when I want to introduce a new site via IIS, at the new ip address. In IIS I have setup a new site at IP 134.133.2.2, port 80. I can not start the site. The event log shows this error; Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. I think this is because IIS 7 tries to listen to port 80 on all IPs, and it cant because Tomcat is taking port 80 for 134.133.1.1. From reading, the resolution is to specify the IP address you want IIS to bind on port 80. The problem is, when I add 134.133.2.2 to the iplisten list, then I get a 404 when I try navigating to 134.133.1.1:443. I assume this is because IIS is no longer listening to ANY port on 134.133.1.1. How do I resolve this such that IIS will return both sites? EDIT: Per request my IIS binding for site A is 134.133.2.2 on port 80 (http) and 134.133.2.2 on port 443. For site B in IIS, the binding is 134.133.1.1 on port 443 (https). Note the IPs in this example are just for example purposes, but consistent with my setup.

  Read the article

• How to stop registration attempts on Asterisk

  - by Travesty3

  The main question: My Asterisk logs are littered with messages like these: [2012-05-29 15:53:49] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:50] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:55] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:55] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:57] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device <sip:[email protected]>;tag=cb23fe53 [2012-05-29 15:53:57] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device <sip:[email protected]>;tag=cb23fe53 [2012-05-29 15:54:02] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:54:03] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 21:20:36] NOTICE[5578] chan_sip.c: Registration from '"55435217"<sip:[email protected]>' failed for '65.218.221.180' - No matching peer found [2012-05-29 21:20:36] NOTICE[5578] chan_sip.c: Registration from '"1731687005"<sip:[email protected]>' failed for '65.218.221.180' - No matching peer found [2012-05-30 01:18:58] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=dEBcOzUysX [2012-05-30 01:18:58] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=9zUari4Mve [2012-05-30 01:19:00] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=sOYgI1ItQn [2012-05-30 01:19:02] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=2EGLTzZSEi [2012-05-30 01:19:04] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=j0JfZoPcur [2012-05-30 01:19:06] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=Ra0DFDKggt [2012-05-30 01:19:08] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=rR7q7aTHEz [2012-05-30 01:19:10] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=VHUMtOpIvU [2012-05-30 01:19:12] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=JxZUzBnPMW I use Asterisk for an automated phone system. The only thing it does is receives incoming calls and executes a Perl script. No outgoing calls, no incoming calls to an actual phone, no phones registered with Asterisk. It seems like there should be an easy way to block all unauthorized registration attempts, but I have struggled with this for a long time. It seems like there should be a more effective way to prevent these attempts from even getting far enough to reach my Asterisk logs. Some setting I could turn on/off that doesn't allow registration attempts at all or something. Is there any way to do this? Also, am I correct in assuming that the "Registration from ..." messages are likely people attempting to get access to my Asterisk server (probably to make calls on my account)? And what's the difference between those messages and the "Sending fake auth rejection ..." messages? Further detail: I know that the "Registration from ..." lines are intruders attempting to get access to my Asterisk server. With Fail2Ban set up, these IPs are banned after 5 attempts (for some reason, one got 6 attempts, but w/e). But I have no idea what the "Sending fake auth rejection ..." messages mean or how to stop these potential intrusion attempts. As far as I can tell, they have never been successful (haven't seen any weird charges on my bills or anything). Here's what I have done: Set up hardware firewall rules as shown below. Here, xx.xx.xx.xx is the IP address of the server, yy.yy.yy.yy is the IP address of our facility, and aa.aa.aa.aa, bb.bb.bb.bb, and cc.cc.cc.cc are the IP addresses that our VoIP provider uses. Theoretically, ports 10000-20000 should only be accessible by those three IPs.+-------+-----------------------------+----------+-----------+--------+-----------------------------+------------------+ | Order | Source Ip | Protocol | Direction | Action | Destination Ip | Destination Port | +-------+-----------------------------+----------+-----------+--------+-----------------------------+------------------+ | 1 | cc.cc.cc.cc/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 10000-20000 | | 2 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 80 | | 3 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 2749 | | 4 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 443 | | 5 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 53 | | 6 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1981 | | 7 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1991 | | 8 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 2001 | | 9 | yy.yy.yy.yy/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 137-138 | | 10 | yy.yy.yy.yy/255.255.255.255 | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 139 | | 11 | yy.yy.yy.yy/255.255.255.255 | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 445 | | 14 | aa.aa.aa.aa/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 10000-20000 | | 17 | bb.bb.bb.bb/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 10000-20000 | | 18 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1971 | | 19 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 2739 | | 20 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1023-1050 | | 21 | any | all | inbound | deny | any on server | 1-65535 | +-------+-----------------------------+----------+-----------+--------+-----------------------------+------------------+ Set up Fail2Ban. This is sort of working, but it's reactive instead of proactive, and doesn't seem to be blocking everything (like the "Sending fake auth rejection ..." messages). Set up rules in sip.conf to deny all except for my VoIP provider. Here is my sip.conf with almost all commented lines removed (to save space). Notice at the bottom is my attempt to deny all except for my VoIP provider:[general] context=default allowguest=no allowoverlap=no bindport=5060 bindaddr=0.0.0.0 srvlookup=yes disallow=all allow=g726 allow=ulaw allow=alaw allow=g726aal2 allow=adpcm allow=slin allow=lpc10 allow=speex allow=g726 insecure=invite alwaysauthreject=yes ;registertimeout=20 registerattempts=0 register = user:pass:[email protected]:5060/700 [mysipprovider] type=peer username=user fromuser=user secret=pass host=sip.mysipprovider.com fromdomain=sip.mysipprovider.com nat=no ;canreinvite=yes qualify=yes context=inbound-mysipprovider disallow=all allow=ulaw allow=alaw allow=gsm insecure=port,invite deny=0.0.0.0/0.0.0.0 permit=aa.aa.aa.aa/255.255.255.255 permit=bb.bb.bb.bb/255.255.255.255 permit=cc.cc.cc.cc/255.255.255.255

  Read the article

• Nginx 500 Internal Server error on subdirectory

  - by juyoung518

  I'm getting a 500 Internal Server error only on sub directories. For example, If my website is example.com, example.com/index.php works. But example.com/phpbb/index.php doesn't work. It just turns up a blank php page. The HTTP header shows HTTP error 500 Internal Server error. If I enter example.com/phpbb/index.php/somedirectory, the index.php of my root directory shows up. This is all very strange. I have tried searching etc but nothing worked. tried re-installing nginx but not fixed. I'm sure I got the DNS configured right. My Nginx Config /sites-available/example.com server { server_name www.example.com; return 301 https://example.com$request_uri; } server { listen 443; listen 80; #listen 80; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /var/www/example.com/public_html; index index.html index.php index.htm; ssl on; ssl_certificate /etc/nginx/ssl/cert.pem; ssl_certificate_key /etc/nginx/ssl/ssl.key; ssl_session_timeout 5m; ssl_protocols TLSv1 TLSv1.1 TLSv1.2; ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS; ssl_prefer_server_ciphers on; ssl_stapling on; resolver 8.8.8.8; add_header Strict-Transport-Security max-age=63072000; # Make site accessible from http://localhost/ server_name example.com; location ~* \.(jpg|jpeg|png|gif|ico|css|js|bmp)$ { expires 365d; add_header Cache-Control public; } if ($scheme = http) { return 301 https://example.com$request_uri; } location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } if ($http_user_agent ~ (musobot|screenshot|AhrefsBot|picsearch|Gender|HostTracker|Java/1.7.0_51|Java) ) { return 403; } location /phpmyadmin { root /usr/share/; index index.php index.html index.htm; location ~ ^/phpmyadmin/(.+\.php)$ { try_files $uri =404; root /usr/share/; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } location ~* ^/phpmyadmin/(.+\.(jpg|jpeg|gif|css|png|js|ico|html|xml|txt))$ { root /usr/share/; } } location /phpMyAdmin { rewrite ^/* /phpmyadmin last; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_read_timeout 240; # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; } } } nginx.conf user www-data; worker_processes 1; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## Block spammers and other unwanted visitors ## include /etc/nginx/blockips.conf; fastcgi_cache_path /var/cache/nginx levels=1:2 keys_zone=microcache:10m max_size=1000m inactive=60m; ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 100; types_hash_max_size 2048; server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log off; error_log /var/log/nginx/error.log; ssl_session_cache shared:SSL:10m; ssl_session_timeout 10m; ssl_ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS; ssl_prefer_server_ciphers on; ## # File Cache Settings ## open_file_cache max=5000 inactive=5m; open_file_cache_valid 2m; open_file_cache_min_uses 1; open_file_cache_errors on; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; gzip_vary on; gzip_proxied any; gzip_comp_level 6; gzip_buffers 16 8k; gzip_http_version 1.1; gzip_types text/plain text/x-js text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*;

  Read the article

• Start a software company offshore

  - by Mascarpone

  Hello Everybody, I own a small, very young, EU based (Italy) company, and among other things, we sell IT solutions. I have a degree in applied mathematics, and I mainly deal with user interfaces, embedded systems, automation and web applications. You can say that I'm an enlightened entrepreneur because I work only with open source software (OS, IDE, I release under BSD , ... everything is free as in freedom), I give high importance to post sales services and customer satisfaction, plus I think I'm the best boss someone could desire (LOL), as I have google in mind when I think about IT workers rights. But the most beautiful thing is that, although everybody advised us not to use open source, is that we are quite profitable!!! (for the sixth trimester in a row). Now I offshore most of the work to an Indian company. I divide the work in modules and I outsource the longer or more trivial ones. I spend a lot of time defining the specifications and I leave the hard work to them. Using productivity bonuses, a lot of prototypes and third-party audits I think that my software has reached a very good quality level. I would like to start my own software development company, in order to improve control over process and cut costs. Obviously I can't afford the cost of labor in the EU, so I thought about opening a company in Asia. What I need Is: 1) Cheap labor - I can afford to give productivity bonuses and higher than average wages and stay profitable just because labor is cheap. 2) Many talents - I need a good level of tertiary education, and a good number of graduates, so I can hire junior developers and train and teach them according to my needs and philosophies (e.g.: open source mind) 3) Good infrastructure - buildings, transport, internet, .... everything that a company might need. I thought about 3 possible candidates: 1) India - I already work with indian people, I know that they are realiable and speak a good english. Big cities are too expensive, but maybe a small city like lucknow http://en.wikipedia.org/wiki/Lucknow could suits my needs. 2) China - They say it's cheaper than India, but I everytime I worked with a chineese company the language was a big barrier. They work hard, are somewhat skilled and cheap but maybe it's a risky path. Plus I feel a little uncofortable with their lack of human rights. 3) Philippines - Same as china: cheaper than india, but maybe less educated. Where do you think it's the best place to start a software company? Any reading or book to advise? thank you very much

  Read the article

• Rails link to PDF version of show.html.erb

  - by Danny McClelland

  Hi Everyone, I have created a pdf version of our rails application using the Prawn plugin, the page in question is part of the Kase model - the link to the kase is /kases/1 and the link to the pdf version is /kases/1.pdf. How can I add a link within the show.html.erb to the PDF file so whichever page is being viewed it updates the URL to the correct case id? <% content_for :header do -%> <%=h @kase.jobno %> | <%=h @kase.casesubject %> <% end -%> <!-- #START SIDEBAR --> <% content_for :sidebar do -%> <% if @kase.avatar.exists? then %> <%= image_tag @kase.avatar.url %> <% else %> <p style="font-size:smaller"> You can upload an icon for this case that will display here. Usually this would be for the year number icon for easy recognition.</p> <% end %> <% end %> <!-- #END SIDEBAR --> <ul id="kases_showlist"> <li>Date Instructed: <span><%=h @kase.dateinstructed %></span></li> <li>Client Company: <span><%=h @kase.clientcompanyname %></span></li> <li>Client Reference: <span><%=h @kase.clientref %></span></li> <li>Case Subject: <span><%=h @kase.casesubject %></span></li> <li>Transport<span><%=h @kase.transport %></span></li> <li>Goods<span><%=h @kase.goods %></span></li> <li>Case Status: <span><%=h @kase.kase_status %></span></li> <li>Client Company Address: <span class="address"><%=h @kase.clientcompanyaddress %></span></li> <li>Client Company Fax: <span><%=h @kase.clientcompanyfax %></span></li> <li>Case Handler: <span><%=h @kase.casehandlername %></span></li> <li>Case Handler Tel: <span><%=h @kase.casehandlertel %></span></li> <li>Case Handler Email: <span><%=h @kase.casehandleremail %></span></li> <li>Claimant Name: <span><%=h @kase.claimantname %></span></li> <li>Claimant Address: <span class="address"><%=h @kase.claimantaddress %></span></li> <li>Claimant Contact: <span><%=h @kase.claimantcontact %></span></li> <li>Claimant Tel: <span><%=h @kase.claimanttel %></span></li> <li>Claiment Mob: <span><%=h @kase.claimantmob %></span></li> <li>Claiment Email: <span><%=h @kase.claimantemail %></span></li> <li>Claimant URL: <span><%=h @kase.claimanturl %></span></li> <li>Comments: <span><%=h @kase.comments %></span></li> </ul> <!--- START FINANCE INFORMATION --> <div id="kase_finances"> <div class="js_option"> <h2>Financial Options</h2><p class="finance_showhide"><%= link_to_function "Show","Element.show('finance_showhide');" %> / <%= link_to_function "Hide","Element.hide('finance_showhide');" %></p> </div> <div id="finance_showhide" style="display:none"> <ul id="kases_new_finance"> <li>Invoice Number<span><%=h @kase.invoicenumber %></span></li> <li>Net Amount<span><%=h @kase.netamount %></span></li> <li>VAT<span><%=h @kase.vat %></span></li> <li>Gross Amount<span><%=h @kase.grossamount %></span></li> <li>Date Closed<span><%=h @kase.dateclosed %></span></li> <li>Date Paid<span><%=h @kase.datepaid %></span></li> </ul></div> </div> <!--- END FINANCE INFORMATION --> <%= link_to 'Edit Case', edit_kase_path(@kase) %> | <%= link_to 'Back', kases_path %> | <a href="#">Top</a> <div style="width:120%; height: 50px; background-color: black; margin: 10px 0 0 -19px; padding: 0; background-color: #d4d4d4;">&nbsp;</div> <div class="js_option_kaseemails"> <%= link_to_function "Show", "Element.show('newinstructionemail1');" %> / <%= link_to_function "Hide", "Element.hide('newinstructionemail1');" %> </div> <h3>New Instruction Email</h3> <div id="newinstructionemail1" style="display:none"> <p class="kase_email_output"> Hi,<br /> <br /> Many thanks for your instructions in the subject matter.<br /> <br /> We have allocated reference number <%=h @kase.jobno %> to the above claim.<br /> <br /> We have started our inquiries and will be in touch.<br /> <br /> Best Regards,<br /> <br /> <strong><%=h current_user.name %></strong> <br /> McClelland &amp; Co<br /> PO Box 149<br /> Southport<br /> PR8 4GZ<br /> <br /> Tel: +(0) 1704 569871<br /> Fax: +(0) 1704 562234<br /> Mob: <%=h current_user.mobile %><br /> E-mail: <%= current_user.email %><br /> <br /> This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you receive this e-mail in error please notify the originator of the message. <br /><br /> McClelland &amp; Co has taken every reasonable precaution to ensure that any attachment to this e-mail has been checked for viruses but it is strongly recommended that you carry out your own virus check before opening any attachment. McClelland &amp; Co cannot accept liability for any damage sustained as a result of software virus infection. </p> <%= link_to 'Edit Case', edit_kase_path(@kase) %> | <%= link_to 'Back', kases_path %> | <a href="#">Top</a> </div> <div style="width:120%; height: 20px; background-color: black; margin: 10px 0 0 -19px; padding: 0; background-color: #d4d4d4;">&nbsp;</div> <div class="js_option_kaseemails"> <%= link_to_function "Show", "Element.show('newinstructionemail');" %> / <%= link_to_function "Hide", "Element.hide('newinstructionemail');" %> </div> <h3>New Instruction Email</h3> <div id="newinstructionemail" style="display:none"> <p class="kase_email_output"> Hi,<br /> <br /> Many thanks for your instructions in the subject matter.<br /> <br /> We have allocated reference number <%=h @kase.jobno %> to the above claim.<br /> <br /> We have started our inquiries and will be in touch.<br /> <br /> Best Regards,<br /> <br /> <strong><%=h current_user.name %></strong> <br /> McClelland &amp; Co<br /> PO Box 149<br /> Southport<br /> PR8 4GZ<br /> <br /> Tel: +(0) 1704 569871<br /> Fax: +(0) 1704 562234<br /> Mob: <%=h current_user.mobile %><br /> E-mail: <%= current_user.email %><br /> <br /> This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you receive this e-mail in error please notify the originator of the message. <br /><br /> McClelland &amp; Co has taken every reasonable precaution to ensure that any attachment to this e-mail has been checked for viruses but it is strongly recommended that you carry out your own virus check before opening any attachment. McClelland &amp; Co cannot accept liability for any damage sustained as a result of software virus infection. </p> <%= link_to 'Edit Case', edit_kase_path(@kase) %> | <%= link_to 'Back', kases_path %> | <a href="#">Top</a> </div> <div style="width:120%; height: 20px; background-color: black; margin: 10px 0 0 -19px; padding: 0; background-color: #d4d4d4;">&nbsp;</div> <div class="js_option_kaseemails"> <%= link_to_function "Show", "Element.show('newinstructionemail2');" %> / <%= link_to_function "Hide", "Element.hide('newinstructionemail2');" %> </div> <h3>New Instruction Email</h3> <div id="newinstructionemail2" style="display:none;"> <p class="kase_email_output"> Hi,<br /> <br /> Many thanks for your instructions in the subject matter.<br /> <br /> We have allocated reference number <%=h @kase.jobno %> to the above claim.<br /> <br /> We have started our inquiries and will be in touch.<br /> <br /> Best Regards,<br /> <br /> <strong><%=h current_user.name %></strong> <br /> McClelland &amp; Co<br /> PO Box 149<br /> Southport<br /> PR8 4GZ<br /> <br /> Tel: +(0) 1704 569871<br /> Fax: +(0) 1704 562234<br /> Mob: <%=h current_user.mobile %><br /> E-mail: <%= current_user.email %><br /> <br /> This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you receive this e-mail in error please notify the originator of the message. <br /><br /> McClelland &amp; Co has taken every reasonable precaution to ensure that any attachment to this e-mail has been checked for viruses but it is strongly recommended that you carry out your own virus check before opening any attachment. McClelland &amp; Co cannot accept liability for any damage sustained as a result of software virus infection. </p> <%= link_to 'Edit Case', edit_kase_path(@kase) %> | <%= link_to 'Back', kases_path %> | <a href="#">Top</a> </div> Thanks, Danny

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >