Search Results

Search found 2370 results on 95 pages for 'av cable'.

Page 16/95 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Using an iPad or Nexus 7 as an Ubuntu Second Monitor

    - by never4getthis
    Is there any way to use an iPad mini or a Nexus 7 as a second monitor through a cable? I dont want something like vnc, I need it to work through the usb cable (or any other cable). I imagine that the iPad will get a lot of hate around here, the reason why I am considering it is because of the larger screen (compared to the nexus 7). I think its self explanatory that I need this to work with ubuntu (as I am posting in this formum). Thanks for reading this highly unorganized, typo-flled (<--see what I did there?), un-cohesive post. Any help will be appreciated!

    Read the article

  • Is there another application like Nokia PC Suite for Ubuntu?

    - by gabiro
    I've been looking for an alternative Nokia PC suite for Ubuntu. I'm tired of switching OS, and I'm tired of using Windows it is so boring me. Not Wammu, Gammu, Nokuntu, Ginokki and Series 60. They don't work. Via cable. I need an application that can detect via cable (because I have a very different reason why I need it to detect via cable). Also after installing in Wine it can't detect the Phone and I think the installation didn't finish correctly. Thank You !

    Read the article

  • Laptop battery sometimes does not charge?

    - by user1880405
    So on my Asus K56C laptop running Ubuntu 14.04 (was same problem in 13.10) I got a problem that from time to time after I use laptop without cable (just on battery) it stops charging with cable. I can still use laptop indefinitely on cable, but it's not charging. The only solution is to remove and reinsert the battery, then it will charge. Now I wonder how does laptop 'knows' that battery was reinserted, and is it possible to simulate that from Ubuntu, maybe some command which refreshes battery? P.s.: this is not happening on Windows 8.1.

    Read the article

  • Is testing every Anti-Virus definition before deployment feasible?

    - by Sim
    With the recent problems that McAfee customers have had over the last week there has been lots of opinion that not only should the AV vendors have better testing but customers should test AV signatures before deploying. Is this feasible? If you are doing this already do you take other measures to minimise exposure to malware while you are testing?

    Read the article

  • slow windows 2008 server

    - by andytimmons
    my friend's company has a win2008 server, not R2, and it's really slow, it has 8G ram, has a SAP business one running on it, and it's also an AD, DHCP, DNS server, has Kaspersky 6 AV running as well. CPU usage is constantly 100%, physical memory is around 70%-90% even close everything, disable AV, if check processes, taskmgr.exe and windows explorer use like 40% each sometimes, do you have any suggestion what could be

    Read the article

  • McAfee Virus Scan and Oracle RAC

    - by Lee Gathercole
    Hi, We're experiencing a strange problem with Oracle RAC and McAfee anti-virus. As part of the installation of the Oracle RAC we disable anti virus as directed. We have had our RAC running fine, but when we came to re-enable the AV and reboot we got the BSOD. Abnormal Program Termination (BugCheck, STOP: 0x00000035 (0x8E984678, 0x00000000, 0x00000000, 0x00000000 NO_MORE_IRP_STACK_LOCATIONS Following the standard process of raising this problem with Microsoft they identify the problem and also a fix. Microsoft talk about too many file filter drivers being present and pushing the DFS upper limit beyond the default size. Upping this value, as per msdn, has no impact. We're able to recover from this BSOD by disabling AV. We don't have the problem if we run the AV service manually whilst the system is up. However, if we make the service automatic we fail to boot. Tech Details 2 Node Oracle 10g Cluster 2 * Windows 2003 SP2, 16GB RAM, Quad Core 3ghz Processor SAN attached storage McAfee VirusScan Enterprise 8.5.0i, Scan Engine (5300.2777), DAT Version (5536.0000) Thanks Lee

    Read the article

  • HTML Tables with jQuery Filtering

    - by Bry4n
    Let's say I have... <form action="#"> <fieldset> to:<input type="text" name="search" value="" id="to" /> from:<input type="text" name="search" value="" id="from" /> </fieldset> </form> <table border=1"> <tr class="headers"> <th class="bluedata"height="20px" valign="top">63rd St. &amp; Malvern Av. Loop<BR/></th> <th class="yellowdata"height="20px" valign="top">52nd St. &amp; Lansdowne Av.<BR/></th> <th class="bluedata"height="20px" valign="top">Lancaster &amp; Girard Avs<BR/></th> <th class="yellowdata"height="20px" valign="top">40th St. &amp; Lancaster Av.<BR/></th> <th class="bluedata"height="20px" valign="top">36th &amp; Market Sts<BR/></th> <th class="yellowdata"height="20px" valign="top">Juniper Station<BR/></th> </tr> <tr> <td class="bluedata"height="20px" title="63rd St. &amp; Malvern Av. Loop"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="yellowdata"height="20px" title="52nd St. &amp; Lansdowne Av."> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="Lancaster &amp; Girard Avs"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="yellowdata"height="20px" title="40th St. &amp; Lancaster Av."> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="36th &amp; Market Sts"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="Juniper Station"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> </tr> </table> Now depending upon what data is typed into the textboxes, I need the table trs/tds to show or hide. So if I type in 63rd in "to" box, and juniper in the "from" box, I need only those two trs/tds showing in that order and none of the others.

    Read the article

  • Trouble rendering a view inside a generic class

    - by Horace Loeb
    I'm trying to encapsulate the logic for generating my sitemap in a separate class so I can use Delayed::Job to generate it out of band: class ViewCacher include ActionController::UrlWriter def initialize @av = ActionView::Base.new(Rails::Configuration.new.view_path) @av.class_eval do include ApplicationHelper end end def cache_sitemap songs = Song.all sitemap = @av.render 'sitemap/sitemap', :songs => songs Rails.cache.write('sitemap', sitemap) end end But whenever I try ViewCacher.new.cache_sitemap I get this error: ActionView::TemplateError: ActionView::TemplateError (You have a nil object when you didn't expect it! The error occurred while evaluating nil.url_for) on line #5 of app/views/sitemap/_sitemap.builder: I assume this means that ActionController::UrlWriter is not included in the right place, but I really don't know

    Read the article

  • print integer and array from file android

    - by vik
    i want to open a file and then calculate the integer and array value from file and print on the screen. i tried this but not working @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); TextView av = new TextView(this); setContentView(av); try { String i = "abc.xyz"; InputStream in = assets.open(i); try { DataInputStream din = new DataInputStream(in); int value = din.readInt(); // print value on screen int[] arry = new int[1]; // print arry on screen how to do it int arry[1] = din.readInt(); } } finally { in.close(); } } catch (IOException e) { throw new PuzzleIOException(e); } av.setText(size); }

    Read the article

  • How to remove "index.php?" from HTACCESS [duplicate]

    - by Francis Goris
    This question already has an answer here: Reference: mod_rewrite, URL rewriting and “pretty links” explained 2 answers I have url like this: www.site.com/index.php?/genero/aventura/av/ But I would like this to be my new url: site.com/genero/aventura/av/ I used the following code: <IfModule mod_rewrite.c>RewriteEngine On RewriteCond %{HTTP_HOST} !^www.site.com/$ [NC] RewriteRule ^index.php\?/(.*)$ site.com/$1 [R=301,L] </IfModule> but only returns me: site.com/index.php?/genero/aventura/av/ This is my latest & full version: RewriteEngine on #RewriteCond $1 !^(index\.php|ver_capitulo\.html|google3436eb8eea8b8d6e\.html|BingSiteAuth\.xml |portadas|public|mp3|css|favicon\.ico|js|plantilla|i|swf|plugins|player\.swf|robots\.txt) RewriteCond $1 !^(index\.php|public|css|js|i|feed|portadas|robots\.txt|BingSiteAuth\.xml|plugins|i|mp3|favicon\.ico|pluginslist\.xml|google3436eb8eea8b8d6e\.html) RewriteRule ^(.*)$ /index.php?/$1 [L] #DirectoryIndex index.php #RewriteCond %{THE_REQUEST} http://www.page.com/index\.php [NC] #RewriteRule ^(.*?)index\.php$ http://page.com/$1 [L,R=301,NC,NE] #DirectoryIndex index.php #RewriteEngine On Thanks for reading.

    Read the article

  • Cannot establish maximum resolution on ASUS PB278Q

    - by dentuzhik
    I've recently bought brand new ASUS PB278Q monitor. When trying to connect to my laptop, everything works great, except that I can't get the native resolution of my monitor (2560x1440) working. The automatic is 1920x1080. My graphic card is Nvidia GeForce 320m. Here's output from lspci for it: ~$ lspci | grep VGA 02:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2) and also xrandr: ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected primary 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 I have proprietary drivers installed on my machine, here's the info about the monitor from nvidia-settings (Actually I don't have enough reputation to post images, so here's the text): Chip Location: Internal Signal: TDMS Connection link: Single Native resolution: 2560x1440 Refresh rate: 60.00 Hz The monitor is connected to laptop via HDMI cable, and honestly I have no idea what version it is, and what version is my HDMI output of my graphics card. I tried to find how I can figure it out on the web, but had no luck. Also my video card has only VGA and HDMI outs so I can't test neither DVI-D cable nor DisplayPort. So apparently, there's some problem over there. At least I want to know exactly what's going on. I've tried to see if it a linux-specific problem, but windows also gave me the same resolution by default. What I've already tried: Connect through VGA (stupid one, of course it gave me 1920x1080). Checked two HDMI cables (not sure if they're the same or not, as mentioned above). Played around with xrandr and adding custom modes. Didn't help. Surfed for the info a lot on the web, but couldn't get appropriate results. Actually xrandr gives me the following: ~$ cvt 2560 1440 60 # 2560x1440 59.96 Hz (CVT 3.69M9) hsync: 89.52 kHz; pclk: 312.25 MHz Modeline "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr --newmode "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected primary 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 2560x1440_60.00 (0x34f) 312.2MHz h: width 2560 start 2752 end 3024 total 3488 skew 0 clock 89.5KHz v: height 1440 start 1443 end 1448 total 1493 clock 60.0Hz ~$ xrandr --addmode HDMI-0 2560x1440_60.00 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30 What I intend to do next: Try another HDMI cable? Try HDMI to DVI-D cable? Try HDMI to DisplayPort cable? Another type of adapters? VGA to DVI-D? Buy another laptop with another graphic card. Damn. My ideas pretty much end here. Any ideas? Any explanations why it isn't working are appreciated.

    Read the article

  • Determining the health of a Cisco switch port?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Is my Cisco switch port bad?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced last week, however the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link (switchport configuration pastebin). We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Malware Defense Shows Up in PlayOn Settings/Logs Although System Has Been Thoroughly Cleaned

    - by nicorellius
    I was hit really hard by some nasty malware: Malware Defense. I was doing something I should not have been doing when I got it (surfing Pirate Bay for TV shows). It locked up my system and I had to reboot in safe mode. I was able to shut down the process and remove it using a malware killer tool. I then installed, after my machine was cleaned up a bit, Clamwin, Malwarebytes, and another AV tool. I cleaned the heck out of my system. Simultaneously, while this was going on, I was having trouble with my media-server, PlayOn. This tool is great, but has some bugs. One in particular is that it will not function well with AV software running. I found a way to allow the new AV software to run while using PlayOn, but it still says I have Malware Defense on. Firstly, Malware Defense is long gone. I cleaned all remnants from my registry and scoured my system with the above tools multiple times. PlayOn is getting some information that I have this crap installed on my system, but it's not. The system runs OK, but not optimally. I have a feeling it is causing my streaming to be interrupted sometimes. How is it that I can't even find Malware Defense on my system if I tried but yet somehow PlayOn is getting a finger print of it somewhere? I have gone back and forth with MediaMall to no avail. I kind of just gave up, because the streaming works OK. BTW, I also uninstalled/reinstalled PlayOn several times, reverted back to previous versions, etc. The only thing I haven't done is reformat my disk and reinstall Windows. I really don't want to do this if there is another way to remove this little print. Any ideas?

    Read the article

  • Anti Virus Service does not run - Windows XP SP3 32bit Home

    - by Stefan Fassel
    I have a somewhat strange problem here. I am trying to run Anti Virus Software on my Windows XP Home 32bit System. After a serious crash I had to fall back to an outdated copy of my initial installation and had Windows install 5 years of updates. So far so good. After Intalling a new Anti Virus Software (Bitdefender 2012) everything seemed to be fine, initial scanning went fine and configuration was working. But after restarting the System the Virus Scanner was unable to start up again. Even the Configuration console of the AV Software did not start. I tried scanning the System for malware, but nothing was found. Then I tried a different AV Software (MS Security Essentials), but in the end it did fail to start too. I have tried to start the Service manually, but I seem to be missing the privilege to do so. I am logged in as a Non-"Administrator" User with Admin privileges (Not much choices there on a XP Home System). I cannot switch to Administrator account outside the protected mode. When running Windows in protected mode I am unable to start the AV Software because it does not run in protected mode. I am a bit at loss now...

    Read the article

  • Find whether TV supports S Video

    - by Vik
    Hello Freinds I have a TV (some unknown model) which has 3 sockets to insert 3 wires red, yellow and white. A DVD Player can be connected to the TV using sockets and the TV displays that the TV is in AV mode when DVD is running. Now i have a Desktop which has a S Video Port and i have a wire to connect the S Video port from my computer to those red, yellow and white sockets using appropriate pins. Now i have searched all over the remote and it does not switches to S Video Mode, it has only 2 modes of operation i.e. 1 Cable Connection (Third Party DTH Receiver receives channels and i pay subscription) and 2 AV Mode. It does not have S Video Mode or any other mode. Now my question is whether i can connect the S Video cable from my desktop to the above described TV or i should look for a new TV if i wish to connect the S Video from Computer to TV or there is any sort of converter that can help? I did tried connecting the S Video cable from Desktop to TV, but it did'nt worked. TV kept on displaying Blue Screen of AV Mode. Regards

    Read the article

  • Jquery Session & Table Filtering

    - by Bry4n
    This is my Jquery <script type="text/javascript"> $(function() { var from = $.session("from"); var to = $.session("to"); var $th = $('#theTable').find('th'); // had to add the classes here to not grab the "td" inside those tables var $td = $('#theTable').find('td.bluedata,td.yellowdata'); $th.hide(); $td.hide(); if (to == "Select" || from == "Select") { // shortcut - nothing set, show everything $th.add($td).show(); return; } var filterArray = new Array(); filterArray[0] = to; filterArray[1] = from; $.each(filterArray, function(i){ if (filterArray[i].toString() == "Select") { filterArray[i] = ""; } }); $($th).each(function(){ if ($( this,":eq(0):contains('" + filterArray[0].toString() + "')") != null && $(this,":eq(1):contains('" + filterArray[1].toString() + "')") != null) { $(this).show(); } }); $($td).each(function(){ if ($( this,":eq(0):contains('" + filterArray[0].toString() + "')") != null && $(this,":eq(1):contains('" + filterArray[1].toString() + "')") != null) { $(this).show(); } }); }); </script> This is my table <table border="1" id="theTable"> <tr class="headers"> <th class="bluedata"height="20px" valign="top">63rd St. &amp; Malvern Av. Loop<BR/></th> <th class="yellowdata"height="20px" valign="top">52nd St. &amp; Lansdowne Av.<BR/></th> <th class="bluedata"height="20px" valign="top">Lancaster &amp; Girard Avs<BR/></th> <th class="yellowdata"height="20px" valign="top">40th St. &amp; Lancaster Av.<BR/></th> <th class="bluedata"height="20px" valign="top">36th &amp; Market Sts<BR/></th> <th class="bluedata"height="20px" valign="top">6th &amp; Market Sts<BR/></th> <th class="yellowdata"height="20px" valign="top">Juniper Station<BR/></th> </tr> <tr> <td class="bluedata"height="20px" title="63rd St. &amp; Malvern Av. Loop"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="yellowdata"height="20px" title="52nd St. &amp; Lansdowne Av."> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="Lancaster &amp; Girard Avs"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="yellowdata"height="20px" title="40th St. &amp; Lancaster Av."> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="36th &amp; Market Sts"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="6th &amp; Market Sts"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> <td class="bluedata"height="20px" title="Juniper Station"> <table width="100%"><tr><td>12:17am</td></tr><tr><td>12:17am</td></tr><tr><td>12:47am</td></tr></table> </td> </tr> </table> I have asked questions on here before and I have had success in converting textbox values to dropdown changes. However this is a bit different. I am using the sessions plugin (which works fine). On one page I have a set of normal drop downs, on submit you get taken to a separate page which runs the function above, however the rows/columns all show and they don't seem to filter at all.

    Read the article

  • How do I force Windows 7 to recognize my Projector?

    - by user63564
    I have a new Dell XPS with an NVIDIA GeForce GT 445M and an old (several years) Epson PowerLite Cinema 550 projector. Windows 7 refuses to recognize that the projector is connected under normal conditions (I'll get to the strange condition in a moment). Here are some things that I have already tried: Confirm that the projector continues to work well on my old Windows XP laptop. Confirm that the video cable (HDMI to HDMI) is connected Make sure the Dell laptop is plugged in to wall power at all times Reboot both the computer and the projector Click "Detect" under the "Connect to an External Display" Windows dialog (no reaction) Click "Rigorous Display Detection" under NVIDIA Control Panel (dialog: none found) Checked "Force Television Detection on startup" under "My display is not shown..." in NVIDIA Control Panel (no effect) Here's where it gets weird... My projector has three states: off, standby and on. Standby means the power switch on the back is on, but the projector is effectively off (no picture, no access to menu or controls). When I plug in the HDMI cable while the projector is in standby, Windows detects the projector! It lets me switch to Duplicate, Extend, or Project Only mode, and adjusts the resolution appropriately. A new Generic Plug-n-Play monitor shows up in my device manager. A "Seiko EPSON PJ" display shows up in my NVIDIA control panel. Then if I turn my projector on, Windows no longer recognizes the display. This is true whether I turn the projector on while the HDMI cable is plugged in, or if I unplug the HDMI cable while turning on the projector. Anyone have any ideas, because I'm completely stumped...?

    Read the article

  • Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

    - by WannabeCoder
    So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

    Read the article

  • Two NIC's 2 Internet Connections, 1 Windows Server 2008 RC2, Routing help required

    - by PJZ
    Hello, I have a Windows 2008 server and 4 other client machines on my home network. I have two internet connections. The main connection is setup with a home router and DHCP on that for all the clients on the network. The secondary connection is just a cable modem which is plugged directly into the server. Local Area Connection: This NIC has an external IP and is connected to the Cable Modem. Local Area Connection 2: This NIC has an internal IP (192.168.0.102) and allows access to all the internal computers. It also has internet access via the local router. So here lies the problem, I want to use the Cable connection on the server for the internet traffic (so that the traffic for server/clients are seperated) but I also need to maintain local access. I am wondering how to make it so that all the internet traffic goes via that NIC because at the moment it goes through the local NIC. As a secondary problem I would also like to forward the connection of one application used by the clients via the server and the cable/server internet because of poor routing for it on the main connection. This perhaps is something for another question though. Thanks for any help you can offer me. Regards PJ

    Read the article

  • Are HDMI to VGA Adapters Really Device-Specific?

    - by allquixotic
    There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

    Read the article

  • Windows Explorer slow to open networked computer, fast to navigate once opened

    - by Scott Noyes
    I open Windows Explorer and enter an IP for a computer on my home network (\\192.168.1.101). It takes 30 seconds or more to present a list of the shared folders. It does not appear to be an initial handshaking/authentication thing; even if I allow the view to load and then immediately load the same again, it is always slow. Once they appear, navigating through folders and opening files is fast. Also, navigating directly to a folder (\\192.168.1.101\My Music) is fast, even if it's the first connection since a restart. Using \\computerName instead of the IP address gives exactly the same results. Pings return in 1ms. net view \\computerName (or \ipAddress) returns the list of shared folders fast. This makes me suspect an Explorer issue rather than a network issue. Suspecting that the remote computer was being automatically indexed or something, I went into Tools-Folder Options-View and unchecked "Automatically search for network folders and printers," but that made no difference. De-selecting the "Folders" icon near the address bar makes no difference. Adding the IP address and computer name to the hosts file makes no difference. Both computers involved are laptops running Windows XP. Both have WiFi and cable adapters. Mine is not connected via cable. The result is the same whether the target is plugged in to the cable or not (although the IP address changes - 192.168.1.101 over cable, 192.168.1.103 over WiFi.) We are using DHCP assigned by the router.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >