Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 16/95 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Restoring raid 5 array after bios flash

    - by cogergo
    I have just flashed my BIOS and now my machine does not detect my raid5 array! It has three 2TB drives in it so that is a LOT of data that will be lost! I have NOT deleted the array and it does not offer me to reboot I'm using Nvidia MediaShield! and Windows 7. Any ideas guys? Thanks! Update: here is the GUI raid configuration. As you see it shows one disk in the array but for some reason not the other two! Click for image of raid configuration error

    Read the article

  • Computer restarts infinitely after Bios/Motherboard screen

    - by user13176
    Like every morning I turn on my computer (which is kinda new and only couple months old) and I never had any issue with it until now. It starts booting, shows that very first screen which has some motherboard picture and stuff and then it show which buttons to press to enter BIOS and etc. Then it suddenly restarted and after that just kept restarting every 3-5 seconds forever. What could that be? I unplugged power cable, checked all the cables, moved a case, it had some wires stuck under it, blew some dust (but didn't open the case yet) and I tried to boot again and it booted successfully and I am writing this issue now. My specs: i3-3220 3.30Ghz 8GB DDR3 RAM 1TB HDD GeForce GTX 650 Windows 8 x64 I also recently upgraded my security software (that's the most recent thing I did) and it includes ZoneAlarm firewall, Comodo Antivirus and Spybot Search & Destroy. But maybe it doesn't have anything to do with this. Cheers

    Read the article

  • PC boot: dl register and drive number

    - by kikou
    I read somewhere in the internet that, before jumping to 0x7c00, the BIOS loads into %dl the "drive number" of the booted device. But what is this "drive number"? Each device attached to the computer is assigned a number by the BIOS? If so, how can I know which number is a given device assigned to? Reading GRUB's source code I found when %dl has bits 0x80 and 0x70 set, it overwrites the whole register with 0x80. Why is that? Here is the code: jmp 3f /* grub-setup may overwrite this jump */ testb $0x80, %dl jz 2f 3: /* Ignore %dl different from 0-0x0f and 0x80-0x8f. */ testb $0x70, %dl jz 1f 2: movb $0x80, %dl 1: By the way. Is there any detailed resource on the boot process of PC's in the web? Specially about what the BIOS does before giving the control to the bootloader and also the standard codes used to communicate with it (like that "drive numer"). I was hoping to write my own bootloader and everything I found is a bit too vague, not technical enough to the point of informing of the exact state of the computer when my bootloader starts to run.

    Read the article

  • How to create an EFI System Partition?

    - by Alex Popov
    TL; DR How do I create an EFI system partition from scratch? How do I put the EFI firmware on it onces it is created? Long version I hava Toshiba T430 laptop. I received it with Windows 7 installed (but I think originally it has shipped with Windows 8). I installed Ubuntu on it, but deleted some partitions on the disk so that I ended up wiping out the Windows and only having Ubuntu. Among the deleted partitions was the EFI System partition. I discovered that Ubuntu now boots in Legacy mode (and not UEFI). I am trying to follow this guide on converting my Ubuntu installation from Legacy to UEFI. The problem - since there is no EFI partition whenever I choose from BIOS to boot using UEFI I cannot boot. That counts not only for the harddrive, but usb and DVD as well. I think this is logical - it expects an EFI partition and since it can't find it, it cannot continue booting futher, be it from HDD or DVD. So how do I recreate the EFI partition? The guide above says: Creating an EFI partition If you are manually partitioning your disk in the Ubuntu installer, you need to make sure you have an EFI partition set up. If your disk already contains an EFI partition (eg if your computer had Windows8 preinstalled), it can be used for Ubuntu too. Do not format it. It is strongly recommended to have only 1 EFI partition per disk. An EFI partition can be created via a recent version of GParted (the Gparted version included in the 12.04 disk is OK), and must have the following attributes: Mount point: /boot/efi (remark: no need to set this mount point when using the manual partitioning, the Ubuntu installer will detect it automatically) Size: minimum 100Mib. 200MiB recommended. Type: FAT32 Other: needs a "boot" flag. I had some trouble creating this partition: I boot from a live Ubuntu DVD, open GParted, create a 200MB partition and format it to FAT32. In GParted I cannot set the mount point and thus cannot set the bootflag. I didn't set the mount point in /etc/fstab since it's a live CD and fstab looked quite differently from what I expected compared to a normal boot. Anyway, I just didn't know what values to set. I booted again via the live DVD and then chose to install Ubuntu. I then created a partition with the mentioned criteria - mount point, 200MB, FAT32, boot flag. However, I continue to have this problem and I suppose it's because on that partition there is no EFI firmware, it's just an empty partition, which is suitable to have EFI firmware. So again, how do I create an EFI partition, which has the EFI software, so that the laptop can once again boot in UEFI mode?

    Read the article

  • Windows7 issue in mutli- tasking and memory

    - by Nitesh
    I seeming some problem in my windows OS recently, let me first say my system configuration. processor - Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66 GHz Installed memory (RAM) - 4.00 GB (3.00 GB usable) System type - 32 bit operating system I am using two OS in this system, first one is Windows7 and the other is centOS. Well, I am using this from a long time there was no problem , and all of a sudden since from couple weeks I am facing problems in my Windows7 OS. In windows7 i was nearing using multiple jobs almost every time i log in, there was no problem but now i don't no what happen I am not able to do multiple jobs at same time. For example- 1 I am now not able to listen to music in windows media player and view photo's. All of a sudden the system stops working and does not respond and then respond after 5mins and the music get played where it got stopped after 5 mins. 2 When i start browersing internet it hangs all of sudden and doesn't respond for 2 or 3 mins and gets loading. I mean it just happens for every operation i do in the system. Even now typing was also difficult, it gets hanged very frequently even though i am doing single task. I have never come across this kind of problem before. So the first thing i did was to see the useage of the processor and the memory. Well, i thick the useage of the processor was fine, for single task the useage was some where around 3 to 5%. Well, it was something weird i found in the memory, in spite of no task that i was running it was using somewhere around 34 to 41% of memory. So i opened the task manager and click on resource monitor in performance tab. And in the memory section of the monitoring tool i found the usage of my RAM, it was something like this. Hardware reserved - 1029 MB In Use - 1430 MB Modified - 49 MB Standby - 1566 MB free - 22 MB And i could also see Available 1588 MB Cached 1615 MB Total 3067 MB Installed 4096 MB well, this if all i could find out and i have no idea why my computer is acting so weird all of a sudden and the performance problem is growing day by day and i also don't know if there is problem in Bios, i have let it for default settings from long time. please help me and Thank you in advance for reading this and helping me.

    Read the article

  • SATA HDD not recognized by BIOS after Windows 7 reinstall

    - by RoliSoft
    I got Win32.Virut.56 virus, which is a very nasty stuff. I reinstalled my Win7, but it reappeared somehow. After hours of headache, I was able to remove it by booting into a live Ubuntu and running CureIT using Wine. I then started reinstalling Windows 7. After the "expanding files" stage it rebooted, however from that point on, my 160 GB Western Digital SATAII hard drive was not recognized. The bios just freezes at "SATAII 1: Detecting...". My other 1.5 TB Seagate SATAII hard drive works correctly. I tried switching cables; that didn't help. I googled this issue, but what came up were usually firmware problems. I can't update the firmware or do anything at all, because if I plug it in, it won't start. My motherboard is an ASRock 4Core1333-Viiv, if that helps. I'm now stuck on a live Ubuntu. I can't install Win7 on the 1.5 TB drive, because it's full of data I need. What do you think I could try to make the hdd work again? As for the moment, I don't have another computer to try if that one recognizes the hdd.

    Read the article

  • SSD Drive not being recongized in BIOS

    - by chobo2
    Well I bought my first drive Mushkin Chronos 180GB and got it installed in my computer and loaded up. I went to windows 7 and initialized the drive and then I installed "SSDlife Free" and loaded it up and my the SSD drive came up said it was "powered on 3 times"(thought it was odd but then thought maybe some testing???). I then restarted my computer and loaded into Acronis. Went to my SSD drive and make a partition called windows(made a basic logical partition). I then loaded up Norton ghost and wanted to copy my current windows onto the SSD drive on the partition I made found out I could not do it through the recovery disk so I made a backup of my windows drive and wanted to then restore it onto the SSD drive. Came back an hour later when the backup was done. I tried to restore the it on my SSD drive and could not find the partition so I loaded up Acronis again and it did not see it. I then went to the bios and saw only my other hard drive. What I tried Tried uplugging and replugging in both sata and power cables. Tried using the power and sata cable from the working drive and giving it the ones that SSD drive were using. Tried Sata AHCI Mode (Intel ICH9 Southbridge) Tried SATA PORT0-1 NATIVE MODE (Intel ICH9 Southbridge) Nothing worked. Software / hardware Windows 7 ultimate Gigabyte S-Series GA-P35-DS3L Mother board I hope someone has some ideas on why it is not being recognized.

    Read the article

  • Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

    - by user971155
    I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

    Read the article

  • Windows xp blinking under score after bios

    - by heyjoe
    so this is for an older pc I have to repair for a friend. The pc has an hdd of about 60 something gb, It uses win xp and let's say 60-70% of the boots it hangs on showing only an underscore bilking line after bios screen, rest of the times it boots fine or the computer shuts down on xp loading screen. Sometimes if you let it alone while the underscore is blinking, it will boot after a while, like a few minutes, some times it won't boot at all even if you give him more time, like one hour. When it boots successfully the pc seems to work fine. I think it's a bad hard disk and i'm about to suggest buying a new one and switching it but I don't have enough experience and i would hate making him buy a new hdd and not solving the problem. anyone has any tips? I know there are other topics about blinking underscores or cursors while xp is booting but the issues about the pc shutting itself down or sometimes booting really freaks me out. Can't format everything and re install until about 10 days from now, cause the dude has some program for his business on this pc and I have to migrate it when the next computer arrives, however he needs to use it until then. so please advise, thx.

    Read the article

  • Windows Server 2008 (x64): Wont boot past bios page

    - by WebSolProv
    Happy New Year, Since a month or so ago I inherited responsibility for small network administration for my sins. The domain controller (yes there is only one, and yes I know it is best practice to have two even in a small domain setup) went down overnight and I have been trying all day to get it back up and running. Unfortunately this machine also administers our entire ActiveDirectory setup: 1) It goes thru the BIOS without any errors, nothing whatsoever 2) It gets into the “select safe mode, safe mode with networking, normal” etc and if you select either of the safe mode options it loads a few files then reboots. If you select normal it just runs for a bit (doesn’t get to the windows splash screen) and then reboots again. 3) If you select windows repair, it asks for an image to repair too: however it would appear that none was taken that can be used (!!) or one is not being shown. 4) I have tried repairing the boot sector and the boot configuration using Bootrec.exe, both which it says were completed successfully but still it doesn’t work. 5) I have tried swapping the drives into another server to rule out hardware and that didn’t work either so clearly it’s the OS. 6) I have tried running chkdsk which ran fine, and also memory check which was also fine. We do have another machine on the network that was installed as a DC so when we decommission the current infrastructure but when I try and "promote" this to the lead DC then I get “you cannot modify domain or trust information because a PDC emulator cannot be contacted" so I am unable to replicare the ActiveDirectory details. If anyone can think of any direction I should follow it would be greatly appreciated, Thanks, Alex

    Read the article

  • USB Flash not recognised by Windows and BIOS, but works fine in Linux

    - by bbalegere
    I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

    Read the article

  • Dell PowerEdge R410: System asks to press F1 or F2

    - by hurikhan77
    We just installed an option card (PERC 6/i) into a brand-new Dell PowerEdge R410 and now the system does no unattended startup but instead asks me to press F1 to continue or F2 to enter system setup after printing the following message on the console: Fan 4 speed may change depending on system configuration and option card install. How do I make the system ignore this "problem" or whatever that is? This system is going to be installed at a remote data center and needs to be able to restart unattended. I do not want to ignore errors completely to not get endless restart loops in case of errors.

    Read the article

  • Should I enable "Intel NIC DMA Channels"?

    - by javapowered
    I have HP DL360p Gen8 646902-xx1 I'm trying to optimize my config for low latency trading. Should I enable "Intel NIC DMA Channels"? Will that help/affect my system? From HP doc: Added a new ROM Based Setup Utility (RBSU) Advanced Performance Option menu that allows the user to enable Intel NIC DMA Channels (IOAT). This option is disabled by default. When enabled, certain networking devices may see an improvement in performance by utilizing Intel's DMA engine to offload network activity. Please consult documentation from the network adapter to determine if this feature is supported.

    Read the article

  • Entering supervisor mode in PhoenixBIOS

    - by Tom
    I'm trying to change the boot order on a VM that uses PhoenixBIOS. I can get to the setup utility. However, I can't figure out how to get into supervisor mode, which is required to change the boot order. Can anyone tell me how to do this? My Google-fu fails me.

    Read the article

  • Error Message: Primary Slave Drive - ATAPI Incompatible

    - by Jaleel Dwight
    So I recently switched towers and now, all of a sudden, I'm getting this error message as soon as I boot my system. The error message reads "Primary Slave Drive - ATAPI Incompatible". This has really been frustrating since there's NO Primary Slave Drive even installed in my computer!! I have one hard drive installed which is recognized as the Primary Master & a DVD Drive which is recognized as the Secondary Master. My old system ran flawlessly. I'm beginning to think maybe my motherboard is bugging out cuz I fail to understand how it can be telling me that a "nonexistent" drive is incompatible. Any suggestions??

    Read the article

  • How to stop S.M.A.R.T check running for external hard drive

    - by gotqn
    I am using Windows 7 and I have enabled my "S.M.A.R.T" check, too. I have bought an external 1 TB USB hard drive. When it is connected with my computer, it delays my machine initial start with about 4-5 minutes. I was very confused at the begging, then disable the "S.M.A.R.T" check and see that the computer runs normally after restart. So, here is what I want to know: Why the check is turn for the external disk? Is there a way to use the "S.M.A.R.T" check only for my main hard drive? Why it takes 4 to 5 minutes more, as my both hard drives - internal/external are 1 TB?

    Read the article

  • Cannot set MemOpMode or ProcVirtualization with syscfg.exe

    - by EGr
    When attempting to set MemOpMode or ProcVirtualization with syscfg.exe, I get the following error: C:\Users\EGr>syscfg --MemOpMode=AdvEccMode System Services or CSIOR disabled In the past, I have been told that this can be resolved by forcefully reinstalling the Dell Lifecycle controller firmware, and then trying again; however, I cannot find my notes on how to do that. Has anyone ever run into this issue, and does anyone know how I can fix it? If it is possible to forcefully reinstall the firmware, how would I do that? I've tried running the installer, but it fails after running for ~2 min. I believe there is a way to fix this as well, by adding/modifying a registry value at HKLM\System\Control\CurrentControlSet\Services\IPMIDRV (that might not be the correct path, but I know it is IPMIDRV). Is this a common issue? What is the actual cause of it?

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

  • ASUS M2N-SLI Deluxe - 1 long and 2 short beeps

    - by Agares
    Hi! I bought Asus M2N-SLI Deluxe. When I put my stuff(all is 100% working): Athlon 4450e 2GB RAM GoodRAM 667MHz(It's polish brand, maybe not popular in other countries) Sapphire Radeon HD2600(I tried replacing it with S3 Trio PCI) with it I heard just 1 long and 2 short beeps. It changes only, when I run MB without processor - then computer run for few seconds and powers off. What's the problem?

    Read the article

  • Can I use a USB monitor (like Mimo) as a primary monitor?

    - by Eduardo Molteni
    I have an old PC in the den without Video Card (I have to remove it after it start failing). I access it through Remote Desktop. I don't want to invest in a new video card since the PC is old. If I buy a USB monitor I can use it as a secondary monitor in the main pc, and plug to the old PC when need. The question is: Does the USB monitor work during booting before the OS was loaded?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >