Search Results

Search found 2372 results on 95 pages for 'flashing the bios'.

Page 14/95 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • IDE <-> SATA Adapter Issue - Hard Drive Not recognized

    - by nicorellius
    I was trying to use one of these IDE to SATA adapters (Syba SD-ADA50016 IDE/SATA Converter Bi-directional IDE to SATA) and I connected a working hard drive (Seagate Barracuda 500 GB SATA 3.5 Inch 7200 RPM Version 12 Desktop Internal Hard Drive ST3500418AS). I could get the drive to be recognized by the BIOS, but I couldn't boot a Linux disc or install to the drive. I tried to install pfSense to this drive and the install failed because the setup couldn't recognize the file. Has anyone heard of these adapters giving trouble and/or not working properly? I would like to be able to use this device for newer drives on older boards.

    Read the article

  • "Disk boot failure" error after installing Windows 7 on SSD

    - by Tony_Henrich
    I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

    Read the article

  • My EEEPc 900HA won't turn on/boot. Can it be fixed or does it need to be sent in?

    - by th3dude19
    My EEEPc 900HA stopped booting up out of nowhere. It went to sleep and when I went to wake it up, it wouldn't wake up. I powered down and went to power back up, but no go. The power light comes on solid and the battery/corded power light blinks consistently. There is no HDD activity or light activity. No BIOS. Just the lights described. I've troubleshooted the RAM, HDD, and internal power connections and everything checked out both on battery power and corded power. I've also reset the CMOS to no avail. What else can I do?

    Read the article

  • Fedora Installation with software repository in DVD does not work

    - by Raks
    I bought a new assembled PC with processor as Core-i3(2120) and Intel H61 motherboard and was trying to install Fedora 16 from a DVD. This DVD contains all the packages so that installation does not require to download packages from internet. I have used this DVD to install Fedora 16 offline many a times though in machines with different hardware configuration. But in this new machine when the installation reaches the stage wherein it asks for Software repository selection I select CD/DVD but the system fails to read the media and throws up an error that it cannot detect the media. THe LED in the DVD writer also indicate that the DVD is not being read. Now there is neither a problem with the DVD or the DVD drive because the installation started from the DVD itself. So what could the problem be, anything in the BIOS that is causing the problem, Is there any way I could utilize the packages already existing in the CD so that I save downloading the packages from DVD

    Read the article

  • New power supply and now HDDs are not recognized.

    - by Michael
    So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

    Read the article

  • S3200SH error 5220 every boot (CMOS/NVRAM Cleared by jumper)

    - by TechAUmNu
    I have a S3200SH Intel server board with a Intel Xeon 3220 Quad Core. Every time I boot it, I get error 5220 (CMOS/NVRAM Cleared by jumper). The jumper is not installed and I have replaced the lithium battery. The board overheated once, although still seems to work fine apart from this error. Also if I leave the board sitting in the bios for a while it sometimes randomly turns off, with all 4 diagnostic LED's red. I have moved the 2GB DIMM to another slot, which seems to have fixed this problem. Any ideas would be greatly appreciated.

    Read the article

  • Dell SC1435 always requires F1 at boot

    - by David Mackintosh
    I have a Dell PowerEdge SC1435 that has come back after doing duty at a partner site. I am trying to configure it for local use. The only problem I have with it is that every time it boots it always requres a manual F1 press after the POST sequence. The last thing it does is give me the opportunity to configure the BMC, and then it says: Press F1 to continue or press F2 for Setup It will wait there forever (well, at least an hour). Pressing F1 starts the OS booting. I can't see the setting in the BIOS which controls this and I can't find it in the documentation. What am I missing?

    Read the article

  • How can I be sure that the motherboard is dead and it's not another issue?

    - by Peter
    So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

    Read the article

  • Monotouch UITableView image "flashing" while background requests are fetched

    - by Themos Piperakis
    I am in need of some help from you guys. I have a Monotouch UITableView which contains some web images. I have implemented a Task to fetch them asynchronously so the UI is responsive, an even added some animations to fade them in when they are fetched from the web. My problems start when the user scrolls down very fast down the UITableView, so since the cells are resusable, several background tasks are queued for images. When he is at the bottom of the list, he might see the thumbnail displaying an image for another cell, then another, then another, then another, as the tasks are completed and each image replaces the other one. I am in need of some sort of checking whether the currently displayed cell corresponds to the correct image url, but not sure how to do that. Here is the code for my TableSource class. using System; using MonoTouch.UIKit; using MonoTouch.Foundation; using System.Collections.Generic; using System.Threading; using System.Threading.Tasks; using System.Diagnostics; { public class ListDelegate:UITableViewDelegate { private UINavigationController nav; public override float GetHeightForRow (UITableView tableView, NSIndexPath indexPath) { return 128; } public override void RowSelected (UITableView tableView, NSIndexPath indexPath) { DealViewController c = new DealViewController(((ListDataSource)tableView.DataSource).deals[indexPath.Row].Id,nav); nav.PushViewController(c,true); tableView.DeselectRow(indexPath,true); } public ListDelegate(UINavigationController nav) { this.nav = nav; } } public class ListDataSource:UITableViewDataSource { bool toggle=true; Dictionary<string,UIImage> images = new Dictionary<string, UIImage>(); public List<MyDeal> deals = new List<MyDeal>(); Dictionary<int,ListCellViewController> controllers = new Dictionary<int, ListCellViewController>(); public ListDataSource(List<MyDeal> deals) { this.deals = deals; } public override int RowsInSection (UITableView tableview, int section) { return deals.Count; } public override UITableViewCell GetCell (UITableView tableView, MonoTouch.Foundation.NSIndexPath indexPath) { UITableViewCell cell = tableView.DequeueReusableCell("cell"); ListCellViewController cellController = null; if (cell == null || !controllers.ContainsKey(cell.Tag)) { cellController = new ListCellViewController(); NSBundle.MainBundle.LoadNib("ListCellViewController", cellController, null); cell = cellController.Cell; cell.Tag = Environment.TickCount; controllers.Add(cell.Tag, cellController); } else { cellController = controllers[cell.Tag]; } if (toggle) { cell.BackgroundView = new UIImageView(UIImage.FromFile("images/bg1.jpg")); } else { cell.BackgroundView = new UIImageView(UIImage.FromFile("images/bg2.jpg")); } toggle = !toggle; MyDeal d = deals[indexPath.Row]; cellController.SetValues(d.Title,d.Price,d.Value,d.DiscountPercent); GetImage(cellController.Thumbnail,d.Thumbnail); return cell; } private void GetImage(UIImageView img, string url) { img.Alpha = 0; if (url != string.Empty) { if (images.ContainsKey(url)) { img.Image = images[url]; img.Alpha = 1; } else { var context = TaskScheduler.FromCurrentSynchronizationContext (); Task.Factory.StartNew (() => { NSData imageData = NSData.FromUrl(new NSUrl(url)); var uimg = UIImage.LoadFromData(imageData); images.Add(url,uimg); return uimg; }).ContinueWith (t => { InvokeOnMainThread(()=>{ img.Image = t.Result; RefreshImage(img); }); }, context); } } } private void RefreshImage(UIImageView img) { UIView.BeginAnimations("imageThumbnailTransitionIn"); UIView.SetAnimationDuration(0.5f); img.Alpha = 1.0f; UIView.CommitAnimations(); } } } Here is the ListCellViewController, that contains a custom cell using System; using System.Collections.Generic; using System.Linq; using MonoTouch.Foundation; using MonoTouch.UIKit; { public partial class ListCellViewController : UIViewController { #region Constructors // The IntPtr and initWithCoder constructors are required for items that need // to be able to be created from a xib rather than from managed code public ListCellViewController (IntPtr handle) : base(handle) { Initialize (); } [Export("initWithCoder:")] public ListCellViewController (NSCoder coder) : base(coder) { Initialize (); } public ListCellViewController () : base("ListCellViewController", null) { Initialize (); } void Initialize () { } public UIImageView Thumbnail { get{return thumbnailView;} } public UITableViewCell Cell { get {return cell;} } public void SetValues(string title,decimal price,decimal valuex,decimal discount,int purchases) { } #endregion } } All help is greatly appreciated

    Read the article

  • Dell poweredge 1850's - wont install os

    - by user1326789
    I have 3 of these dell 1850 rack servers. 1 has 3GB RAM and 2 73GB HDD's. 2 have 6GB RAM and each of them has 2 73GB HDD's. I am currently trying to install an os on them but when i boot with windows xp setup, it gives me an error saying no partition found. Now i have set these drives up in RAID on the server and i put them "online" so it should be working fine but they're not. Please assist me in installing an operating system on these, i have no clue as to if it's the BIOS or the RAID controller within it. Thanks in advance, -Matt.

    Read the article

  • IBM x260m won't boot from PCI SATA card

    - by syrenity
    Hi. We ghosted our old Windows 2003 drive to a new 1TB one, and connected through new PCI SATA card. The x260m server fails to boot with error 1962: "Boot sector not found." When we connect the drive directly to motherboard, it boots fine, so the problem is probably in getting BIOS to boot from the SATA card. Has anyone encountered and solved such issue? EDIT: We tried disabling the on-board Sata controller (Hostraid/SAS?), but there is no such option - only enable, enhanced and compatible. Tried also to chance boot device priority to all possible choices - no luck. Thanks in advance!

    Read the article

  • Flashing and closing PyS60 SIS

    - by Matrich
    I created a py script for S60 2nd Edition FP3 with a background image, database, sound files which are stored in a folder on c drive. After several hours, I have managed to convert it into sis which I sent to my mobile phone. First, I installed the sis on the external memory and it failed to work. I read online that it should be on the same drive as python runtime. So I installed it on phone memory but it just flashes and then closes. I made another sis with a database and it worked so I suspect it could be because it cant find the background image and sound files in the folder. How can I know the cause of this? Also, how can I include the background image and sound files with the sis so that they are automatically installed when installing the sis file?

    Read the article

  • Why is my Asus P5PL2-E using 640MB of RAM (out of 4GB) ? [closed]

    - by Tom
    Possible Duplicate: Windows XP and RAM 3.5GB+ I've recently installed 4GB of RAM on my server, which is running Windows XP SP2 32-bit and My Computer showed that only 3.37GB were installed. After digging Google for a bit, I couldn't find anything helpful, but I do remember reading a post in a forum regarding the motherboard using 640MB of RAM. Digging in my own BIOS, I've also found that my motherboard has also reserved that amount for its self. Why does my motherboard reserve this memory and how can I tune it down to say 128MB?

    Read the article

  • Patriot-2 RAM on ASUS PK5-E not running at PC2-8500?

    - by evan
    I have a P5K-E Motherboard and recently upgraded to 8GB of RAM (4 2GB sticks of PC2-8500 1066 MHz - Patriot Viper 2). When looking at the RAM with PC Wizard 2010 it's showing the RAM being recognized PC2-6500. I've read elsewhere that this is a common problem and requires manually changing the DRAM Voltage in BIOS to 2.2. I've done this and I'm still getting it recognized as PC2-6500. (I also manually set the FSB speed to 1066MHz instead of the AUTO). Any ideas on how to get this memory working properly? Thanks in advance!

    Read the article

  • How to prevent modal view controllers flashing when changing

    - by KP Overflow
    I have three view controllers, let's call them A, B and C. When a button is pressed on view A, view B is shown using presentModalViewController:animated: When the finish button is pressed on screen B, it dismisses itself. View A is notified whereupon it immediately shows view C, again using presentModalViewController:animated: The problem is that view A's content is momentarily flashed on the screen between view B closing and view C opening. I can get around this by making view A blank and moving it's current content to a new view, D. (For various reasons, I don't want view B to own view C, that's why it's not opening it) Am I over-complicating this? I'm sure there is a smarter way to go? ThanksT

    Read the article

  • AsyncPostBackTrigger Just flashing/flicking the UpdatePanel but not updating it

    - by Pankaj
    I am trying UpdatePanel & AsyncPostBackTrigger on master pages through find control method but problem is when I click on button (UpdateButton) It just flash/flick (No Postback) the UpdatePanle but still it don't update or refresh the gridview (images) inside the updatePanel. I have placed script Manger on the master page & an AJAX Update panel in a ContentPlaceHolder in the child page. Also, in another ContentPlaceholder there is an asp button (outside of the UpdatePanel). I want to refresh/reload the AJAX UpdatePanel with this asp button. Thanks for suggestions. Child Page Code :- protected void Page_Load(object sender, EventArgs e) { ScriptManager ScriptManager1 = (ScriptManager)Master.FindControl("ScriptManager1"); ContentPlaceHolder cph = (ContentPlaceHolder)Master.FindControl("cp_Button"); Button btnRefresh = (Button)cph.FindControl("btnRefresh"); ScriptManager1.RegisterAsyncPostBackControl(btnRefresh); } protected void btnRefresh_Click(object sender, EventArgs e) { UpdatePanel1.Update(); } <%@ Page Title="" Language="C#" MasterPageFile="~/InnerMaster.master" AutoEventWireup="true" CodeFile="A.aspx.cs" Inherits="A" Async="true" %> <asp:Content ID="Content3" ContentPlaceHolderID="MainContent" Runat="Server"> <asp:UpdatePanel ID="UpdatePanel1" UpdateMode="Conditional" runat="server"> <ContentTemplate> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="id" DataSourceID="SqlDataSource1"> <Columns> <asp:TemplateField> <ItemTemplate> <asp:Image ID="img12" runat="server" Width="650px" Height="600" ToolTip="A" ImageUrl='<%# Page.ResolveUrl(string.Format("~/Cli/{0}", Eval("image"))) %>' /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </ContentTemplate> </asp:UpdatePanel> </asp:Content> <asp:Content ID="Content4" ContentPlaceHolderID="cp_Button" Runat="Server"> <asp:Button ID ="btnRefresh" runat="server" onclick="btnRefresh_Click" Height="34" Width="110" Text="More Images" /> </asp:Content> Hi updated code :- Now on click event whole pages is refreshed. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; namespace EProxy { public class EventProxy : Control, IPostBackEventHandler { public EventProxy() { } public void RaisePostBackEvent(string eventArgument) { } public event EventHandler<EventArgs> EventProxied; protected virtual void OnEventProxy(EventArgs e) { if (this.EventProxied != null) { this.EventProxied(this, e); } } public void ProxyEvent(EventArgs e) { OnEventProxy(e); } } } On Master Page Code (btn click):- protected void btnRefresh_Click(object sender, EventArgs e) { ContentPlaceHolder cph = (ContentPlaceHolder)this.FindControl("MainContent"); EventProxy eventProxy = (EventProxy)cph.FindControl("ProxyControl") as EventProxy; eventProxy.ProxyEvent(e); } Web Config :- <pages maintainScrollPositionOnPostBack="true" enableViewStateMac="true"> <controls> <add tagPrefix="it" namespace="EProxy" assembly="App_Code"/> </controls> </pages>

    Read the article

  • HP Z210 SFF: two different video cards produce no Displayport output when installed

    - by ConcernedOfTunbridgeWells
    I have a HP Z210 SFF that I'm trying to install a video card into. I've tried two different cards in Slot 2 (a Quadro FX380LP and a Quadro 600). Neither of these cards produce a displayport signal when installed. With neither installed the displayport port on the motherboard works fine with the built in graphics. When I install the cards it produces no signal and the cards don't either. The Quadro 600 is brand new and the odds of having two dead video cards is quite low. Is there something fundamental that I could be missing out - a BIOS setting maybe?

    Read the article

  • Computer won't reboot without waiting for a while

    - by Benjamin
    I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

    Read the article

  • Hard drive not detected after installing the Operating System

    - by Eka Anggraini
    After I failed to install SUSE Linux 10.0, I want to go back to the windows operating system again. but when I want to install windows, my hard drive is not detected, whereas in the BIOS in the detection / known. I was dizzy, his mistake about it. Where is. I was looking for, my problem is named after the Blue Screen of Death (BSOD) that is an error message from windows to prevent further damage, but with various types of error messages, one of them as I have *** STOP: 0X0000007B (0XF896A524, 0XC0000034, 0X00000000, 0X00000000) I do not know, where the system is broken. but why hard drive is not known ... at the time of going to re-install?

    Read the article

  • Terrible Performance with SATA Drives on Dell PowerEdge, steps to troubleshoot?

    - by Tom
    I had asked this question earlier and the question went missing so here it is again. Bought a DELL Poweredge 2950 to use as in-house QA Server. Disk performance is beyond terrible, 1000-4000 ms response time on the drive with our SQL Server database .mdf. Sql Server disk queue upwards of 300 at times. I'm a software guy, can anyone help me with steps to determine the issue? I don't know what RAID controller it has, how can I determine that? I'm speculating it could be BIOS issue. Perhaps the server used to have another kind of drive in it and when I added SATA the ??? buffer size is wrong??? Perhaps I chose wrong options (chose defaults) when setting up the RAID 1 arrays? I thought RAID 1 was a performance array?

    Read the article

  • How do I properly dual boot Ubuntu and Windows 7 on an UEFI system?

    - by S. Robert James
    I have an HP Z210 with Windows 7, which is UEFI based. I'd like to dual boot it to Ubuntu 11.10 with GRUB2, but am having problems due to the UEFI. The install CD goes to the end, but then the machine always boots right into Windows. These problems are apparently documented (here and here), but there's no consensus as to what the simplest solution is. Any recommendations? I want Ubuntu and Windows to both be bootable. (Perhaps if I knew more about UEFI and its system partition, and how it differs from BIOS and MBR, I'd be in a better position. So background answers explaining how UEFI loads up are very appreciated.)

    Read the article

  • Disable RAID Controller

    - by B.Mr.W.
    I have some decent HP Proliants server that come with "HP Smart Array P410i Controller" enabled, I am using these boxes to set up a Hadoop cluster and I know, RAID is for sure a no-no for Hadoop since the application itself will take care of data redundancy and extra intelligence provided by RAID won't be helpful and might turn down the performance. I tried to disable the devices at the BIOS and the box cannot even access the disk afterwards. So I am assuming the controller is sitting between disks and mother board, and we have to turn it on and configure it to "level0" or something like that. I am wondering what should I do to "disable" the RAID functionality so it will fit into the Hadoop environment.

    Read the article

  • Time randomly changing itself, internet randomly dying

    - by Vee
    Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

    Read the article

  • USB keyboard not recognized by motherboard with only a legacy PS/2 header

    - by Luis
    I've bought a D945GSEJT Atom motheboard that has three usb ports available and no PS/2 connector, just a PS/2 header. I have a PS/2 keyboard with a PS/2 to USB adapter and connected it to a USB port. I tried all three USB ports. The problem is that the board seems to not recognize my keyboard. None of the keys I press are detected by the system. I've read that maybe I could try to change BIOS USB settings to solve this detection problem. But how can I do it if I can't type anything? Is there any other option other than buying a PS/2 adapter and plug it to the PS/2 header?

    Read the article

  • Computer only booting after POWER ON/OFF 10 times or more?

    - by Jan Gressmann
    Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >