Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 16/954 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • How do I troubleshoot a slow hard drive?

    - by Bruce Connor
    My computer is suffering of slow-downs and I'm not surprised (it's around 6 years old). Here's what I've verified: They are not very frequent (only a couple of times a day). When they happen a single application will hang for 10-60 seconds, while the rest don't hang but also get slow. Even as it is happening, the CPU usage stays low. It happens to applications (such as text editor, firefox, skype). It never happens to some applications (such as games) which I use for hours under heavy CPU load. Also of note: The Graphics card and PSU are new (around a year). Though I have a decent amount of software installed right now, this was happening even right after I reinstalled Windows. This HDD has been through many partinioning schemes, and a few heavy operations (such as moving around 200GB of data). Because of the above, I am already 70% sure the problem is with the hard drive. Before I replace it, however, I want to rule out other less likely possibilities (such as RAM, software, or PSU). I don't have the money to replace the entire box right now, but I can easily replace one of the components. I've read several questions (such as this one) which give general guidance on troubleshooting an unknown issue, that is not what I'm looking for here. My main question is: What tests or benchmarks can I run to verify I have a problematic hard drive? I don't need to solve this problem, I am content with just making sure it's the hard drive. I could borrow a newer hard drive from a friend and see if it gets better. A positive result would rule out all other components, but it wouldn't rule out a software issue (since this new hard drive won't have any of the software I use daily). Running on Windows/Linux.

    Read the article

  • Secondary drive corrupted/not reading

    - by Sebastian
    When I connect my Seagate Barracuda to the computer, it shows up on the list of drives in Windows Explorer, but right clicking on it crashes Windows Explorer, opening it won't do anything, and I cannot start disk manager when it is connected. Trying to search the drive also freezes Windows Explorer. I have tried to run CHKDSK on it, and it was "unable to read $J data stream" for the Usn Journal. Also, it was an internal drive, but I pulled it out and hooked it up externally so I could test if it was that drive causing the problems. Is there any way for me to copy the files off of the drive?

    Read the article

  • Multiple LiveCD iso's on a single USB drive

    - by Keck
    I am looking to create a USB flash drive that I can put multiple LiveCD iso's on and select which boots from startup. The ideal candidate supports linux and windows based iso's, and is relatively simple. It also must have some reasonable process for adding and removing iso from the drive/list. Things that I'm not looking for this specific question: UBCD or other swiss-army knife livecd's. The point is to boot any one of multiple CD's, not to boot a (certainly useful) utility CD. Installing a single LiveCD to a USB drive. I'd like to have multiple iso images, selectable at startup. I don't have a specific purpose in mind, possibilties include a single drive with a knoppix variant, ubuntu desktop, UBCD for dos, UBCD4Win, the Offline NT Password Cracker, etc. Flexible and easy to use are the name of the game!

    Read the article

  • Best way to backup Xbox 360 USB Drive

    - by TekiusFanatikus
    What is the best way to backup/restore my USB drive that I use for my Xbox? I want to make sure that if the USB drive goes, that I can retrieve my saved games and such onto another USB drive. I was able to show the content of the drive, however, I wasn't sure if I could simply copy the content onto a Truecrypt volume and be able to restore it from there at a later date. The file system is not FAT or NTFS, wasn't sure about the impacts of copying from two different file systems... I currently have a DataTraveler G3 16GB. After a bit of googling, I was able to find this article, mentions an app called USBXtafGUI

    Read the article

  • Cannot share files on USB drive between Windows 98 and Windows 2000

    - by Ken Pespisa
    I've run into a strange situation where I can't share files between Windows 98 and Windows 2000 using a USB flash drive. Files I put on the Win98 machine can be read by that machine, but not by the Win2k machine. And likewise, I can add and read files on that drive from the Win2k machine, but those files don't appear on the drive when accessed from the Win98 machine. Anyone have ideas as to what could be the cause of this?

    Read the article

  • [URGENT HELP PLEASE]USB Flash Drive Problem!

    - by Daren
    Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

    Read the article

  • primary master drive fail

    - by Kelly
    I purchased a new hard drive for my desktop and when I try to boot up the computer with a Windows disc in the drive, it will go through a bunch of screens and ask me which partition I would like to install windows into, but after it goes through the formatting step and reboots, I get a message saying Primary Master Drive Fails. How do I fix this?

    Read the article

  • USB Flash Drive Problem!

    - by Daren
    Here it goes. My friend saved by his works into my flash drive which was detectable/openable but ... The very next day, the drive wouldn't show up in My Computer and Windows gave him error code 43 (Unknown device). I been searching for the next few hours to find a solution as the works inside is important to him. I know he should back up his files but let's not go there. So .... I tried others few systems that once detected his flash drive but the problem still persisted. I don't know whether or not his flash drive is damaged but when plug/un-plugging, there are still sounds coming out though. Tried solutions: [On Vista Home Premium/HIS COME]Uninstalled -- Restarted com -- Re-installed (ERROR 43) [Windows 7/MY COM] Uninstalled --- Restarted com --- Can't install (ERROR 43) It seems that my com (Windows 7) had the lastest drivers already but still can't detect it. Its a Kingston DataTraveller 101 (DT101) 8GB. Could unplugging the flash drive without clicking "Safely Remove Hardware" is the problem? Kindly provide some help. Thank you all.

    Read the article

  • Appropriate USB enclosure to use with an Ultra ATA drive

    - by Topdown
    I have a friend with a broken iBook, but we wish to recover the hard disk. I haven't seen the drive itself, however the spec lists it as an "Ultra ATA drive". Could you please advise if this is 100% compatible with any standard USB IDE 2.5inch enclosure? Full spec: iBook 12" 1GHz(AP) 256MB DDR266 SDRAM built-in Keyboard/Mac OS X Bluetooth Module 40GB Ultra ATA drive Combo (DVD-ROM/CD-RW).

    Read the article

  • TrueCrypt Failing to Decrypt External Hard Drive after changing Enclosures

    - by Anx Ara
    I have a 4TB external hard drive that was previously encrypted using TrueCrypt. The power source on the hard drive enclosure failed, so I had to switch the hard drive itself into a new enclosure. I can no longer decrypt the hard drive using TrueCrypt, as it says my password is wrong. I am certain that I entering the correct password. Additionally, in TrueCrypt, when I try to mount the volume under "Select Device", it shows the following: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 465GB Whereas before I changed the enclosure it would show: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 3.6TB I am on a Windows 8 PC and using TrueCrypt 7.1a. How can I get it to decrypt properly?

    Read the article

  • How to format drive with partitions

    - by halogenp
    Hi, I have a drive with 3 partitions - Vista, Ubuntu and just storage. Im used to creating an formatting partitions. However I have never formatted a entire drive with partitions. Any pointers to resources would be great. Again I wish to format the entire drive removing the partition. Thanks.

    Read the article

  • Recommendations for USB flash drive fast at writing small files

    - by Andrew Bainbridge
    I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

    Read the article

  • Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

    - by geerlingguy
    I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

    Read the article

  • Old hard drive file permissions still there

    - by blsub6
    I have a new hard drive, put Windows 7 on it and want to get all the files off of my old hard drive. I put in my old hard drive as a slave drive. I can see the files but when I try to move 'em, it tells me that I'm not the owner of the file. I try to take ownership of the file and it doesn't work (it doesn't tell me that I can't take ownership of it, it goes through, just gives me the same error when I try and open the file again). I've tried modding the permissions, no dice. Anything else I can try?

    Read the article

  • Partition Bootable Flash Drive

    - by iAndr0idOs
    I created a bootable flash drive with Chromium OS installed on it. However, Chromium OS only needs about 4GB of space, and my flash drive is 8GB. I wanted to make the rest of the 4GB a FAT32 partition, but when I look at GParted, I have 12 different partitions on the flash drive with unallocated space scattered everywhere. I made the bootable flash drive with Ubuntu Linux's usb-imagecreator I run Ubuntu Linux 11.04 x86_64 and Windows 7 Professional x64 If any of you have experience with this, any help would be appreciated. Thanks!

    Read the article

  • Cloning hard drive -- data, operating system settings, everything

    - by Salman A
    I am using Windows XP. My hard drive (Seagate 160gig Barracuda) is about to fail. Its already developed bad sectors and it seems to get worse everyday. Data transfer mode is down to PIO mode 2, chkdsk runs every now and then, registry and important windows files get corrupted and I spend 30-60 minutes running chkdsk /f /r from the recovery console. I've got a replacement (Seagate 5000gig Barracuda) and now i want to transfer each and every thing on to the new drive. I don't want to go through windows and software installation, I spent ages getting all those software installed and configured on that hard drive. Need advice: whats the best way to transfer everything onto the new drive so that it behaves just like the old one. And are there any "gotchas".

    Read the article

  • Boot linux off hard drive and then switch to run from usb flash disk

    - by Jesse
    I have an older laptop that I want to use as a simple media server on my home network. I would like to avoid using the internal hard drive except for booting (BIOS does NOT support booting from USB). My thought was to mirror the hard drive (currently has current install of Arch Linux) onto the flash drive and then after booting switch over to run everything from the flash drive. I read the following article about using a RAM disk (HOW-TO: Boot OS into RAM for speed and silence) but ran into problem because the USB subsystem does not seem to be initialized soon enough (I create root and home paritions on the flash disk and modified fstab to pick those - didn't work). Any thoughts?

    Read the article

  • Compiling LaTeX document makes Google Drive crash

    - by Sander
    I've the issue that when I compile a LaTeX document that is located inside my Google Drive this will after a few turns make the OSX Google Drive application crash. As this is an important document I want to keep it all the time inside the Google Drive location to ensure cloud backup but this ofcourse is not guaranteed if this makes my Google Drive crash all the time. I don't seem te be able to identify what is causing this and I was hoping that maybe some people here have any idea what might cause this? We're talking about a 8 pages document with 3 images, so nothing crazy big or complex.

    Read the article

  • Macbook optical drive blocked

    - by milse
    The optical drive on my Macbook seems to have some sort of blockage. When I try to insert a disk the disk seems to be hitting something inside the drive on the right side (the side nearer the monitor). Thus disks do not fit into the drive. This problem occurred a few weeks ago, but then miraculously fixed itself. It felt like I had managed to maneuver the disk over the blockage. Now the blockage is back and I can't get any disks into the drive again. Anyone ever encountered this problem before? I probably need to open up my Macbook, huh.

    Read the article

  • Disable or sleep secondary hard drive in Macbook

    - by cpak
    I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original hard drive to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the hard drive is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the hard drive when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it.

    Read the article

  • External USB disk drive cannot be remounted in Windows XP

    - by jackhab
    I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

    Read the article

  • Corliss Expert Group Home Security: How to Secure Your Home without Spending Too Much?

    - by Mika Esmond
    HOME SECURITY: HOW TO SECURE YOUR HOME WITHOUT SPENDING TOO MUCH Imagine if there were no burglar or criminals who threaten the safety of our homes; we will be surprised how much savings we would have on several things we do to secure ourselves and our loved ones. We would not need fences, gates with locks, doors locks, window grills, CCTV cams, perimeter lighting, shotguns and baseball bats. The cost of maintaining these things can run up to the entire cost of building another room or, in some cases, a whole new house. The rationale for home security is the same for national security. A nation maintains an army whether it has enemies or not; so, whether burglars will come or not, we have to prepare for the eventuality. Hence, we end up spending for something we might never put into the actual use it was intended for. You buy a pistol and when a burglar breaks in you fire the gun either to scare or disable the intruder. We hope we will never have to use these things; but we still buy them for the peace of mind that comes from knowing we can secure or protect our family and home.

    Read the article

  • Using OSX home directories from linux

    - by Steffen
    I'm running an OSX (Snow Leopard) Server with OpenDirectory, which is nothing else than a modified OpenLDAP with some Apple-specific schemas. However, I want to reuse this directory on some of my Linux (Debian Squeeze) boxes. It's no problem to authenticate against OSXs LDAP Server, this works fine already. What I struggle with is the way the home folders are specified in OSX. If I query the passwd config on one of my linux machines, the OSX imported entries are looking like this myaccount:x:1034:1026:Firstname Lastname:/Network/Servers/hostname.example.com/Volumes/MyShare/Users/myaccount:/bin/bash While those network home folders might be fine for OSX-Clients, I don't want those server based paths on my linux machines. I saw that there is an NFSHomeDirectory Attribute in the OSX User inspector, but if I change this the whole user home path gets changed. Since my users should be able to login on both systems, OSX and Linux, this is not what I want. Does anyone have an idea how I must configure OSX to make my linux machines use home folders like /net/myaccount and leave the configuration for OSX clients untouched?

    Read the article

  • Unable to delete all partitions on flash drive using Windows 7 OS??

    - by irrational John
    Recently I purchased an ADATA C802 8GB flash drive. Since the drive was new I decided to run some of the HD Tune Pro (v4.50) performance tests on it, mostly just for the heck of it. To avoid accidently destroying data HD Tune refuses to write to a drive unless there are no partitions on the drive. If you do attempt to write to a drive with partitions, it posts the message "Writing is disabled. To enable writing please remove all partitions." As you would expect, the ADATA came formatted with a single primary FAT32 partition in the Master Boot Record. But a number of unexpected things happened when I attempted to delete that partition. The first thing I tried was to use the Windows 7 (64-bit) Disk Management tool (diskmgmt.msc) to delete the partition. It would not let me. The context menu choice to delete that volume was not available. Next I opened up a command prompt window with Admin authority and ran diskpart. Diskpart deleted the volume for me. However, when I attempted to run an HD Tune write test on the drive I still got the "Writing is disabled" message. Huh??? So I fired up a utility I have which allows viewing drives at the sector level and verified that the partition table in the Master Boot Record was empty. No partitions. Yet HD Tune still thought there were partitions on the drive? So why was I still getting the "Writing is disabled" message from HD Tune Pro? And why wouldn't the Windows 7 Disk Management tool let me change the partitions on this drive. After doing the above, I plugged the ADATA into my MacBook. I was then able to format it as either a GPT or MBR partitioned drive with no problems. I am not looking for suggestions on how to format this drive. I can do that. What I do not understand and was hoping I might get insight into is why this drive behaves so strangely under Windows 7? And BTW, what's up with HD Tune Pro? BTW, if I plug the drive I formatted on my MacBook back into my Windows 7 64-bit system I still run into road blocks with the Disk Management tool. For example, I cannot delete all the GPT partitions on the ADATA so I can convert it into an MBR drive. I following Microsoft's instructions, the instructions just do not work with this ADATA flash drive. Anyone know what's up with this? It makes no sense to me. Has something changed in Windows 7 (Vista)??

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >