Search Results

Search found 23832 results on 954 pages for 'home drive'.

Page 20/954 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Cloning to a smaller hard drive with DDRescue

  - by krebshack

  I am currently working with a 700 GB Seagate hard drive that's beginning to fail. I'll call this "SDB" from now on. I'd like to clone it while I'm still able to. However, the only hard drive that I have available is a 500 GB WD hard drive. I'll call this "SDC" from now on. The partition scheme on SDB is as follows: 9.77 GB is allocated to a recovery partition and the remaining 688.87 GB is allocated to a Windows partition. Both are formatted using NTFS. There is no partition scheme on SDC. I know how to clone one hard drive to another using DDRescue but I've only done it using hard drives that are the same size. For your reference, I'll normally use the command "ddrescue -v -r 3 /dev/sdb /dev/sdc example.log". I'd like to know if it's possible to do this with DDRescue. I've read the manual from GNU (http://www.gnu.org/software/ddrescue/manual/ddrescue_manual.html) and I haven't seen anything indicating that it is possible. I'm just looking for some confirmation that this is a correct impression. If it's not possible, then it would be helpful if any of y'all would be able to make some work around suggestions. But please don't feel obligated to do that. I don't want to have my one thread bogged down with two many questions.

  Read the article

• Recovering data from an external hard drive

  - by CCallaghan

  I have a WD Elements 2GB hard drive (formatted NTFS). I accidentally kicked out the USB cable while writing data to the disk, and now I can't access most of the data. Although this was ostensibly my backup drive, there is a great deal of important material on there which was only on there. I realise how idiotic this makes me. (So, formatting is not an option.) Things I've tried/information I've gathered: Windows Explorer will recognise the drive itself. However, it will not access most directories therein (and will sometimes crash when exploring). I can access all of the directories through the command line, but the dir command will often report that it can't read any files in most of the directories. The situation was similar when I hooked it up to an Ubuntu machine: the file explorer crashed, but I could access directories - but not files in those directories - via terminal commands. Several files I tried to copy out either resulted in an I/O error being reported or resulted in the command line crashing. The Disk Management utility on Windows reports a healthy disk formatted as NTFS and not RAW. It also indicates the correct amount of space used up and its capacity (so it seems that the files are not deleted). I've tried to run chkdsk, but that hangs on Step 2 (checking indexes) at 74%. Step 1 reported no bad sectors. I tried Recuva, but that didn't seem to work (stalled at 0% for half an hour). I should also note that the disk doesn't seem to be spinning smoothly; it seems to be chopping back, like it's reading the same sector over and over again. I noticed this after I kicked out the cable. Any help would be greatly appreciated. Update: It would seem the problem has taken a turn for the worse. The external hard drive now shows up on my computer as a local disk and is not mountable by Linux.

  Read the article

• How to provide users with isolated drive letters in Windows 2008 R2 (Terminal Server) [migrated]

  - by Pierre

  I need to be able to host several RDP sessions on a Terminal Server, where users of group A see a drive X: mapped to a given folder of the server and another group B see the same drive letter X: mapped to another folder. For instance : User 1, Group A X: --> C:\data\A User 2, Group A X: --> C:\data\A User 3, Group B X: --> C:\data\B User 4, Group C X: --> C:\data\C Is this possible. If so, how do I configure the virtual drive mapping so that the user has nothing special to do; i.e. I want the letter X: to be available to Remote Apps launched by the user, or if the user logs in to the remote desktop. Can I somehow use subst to get this to work? I would like to avoid, if possible, mounting drive letters on local shares (i.e. I don't like the idea of having to go through \\localhost\data-A to reach the user's data).

  Read the article

• Looking for home networking hardware and software advice

  - by phobos7

  Note: I originally wrote this up in a blog post. I've removed any affiliate links that I put in my original post to ensure I don't annoy anybody. I've recently moved home and I now need to go to the trouble of sorting out my home network yet again. We had Virgin broadband in Hertford but you can't get Virgin in the street we've moved to so I've had to go with O2 Broadband. Normally I prefer to use my own hardward, and previously used the DLink DIR-655 router which was great, but in this situation I am using the O2 Wirelss Box III since I only have an old Netgear DG834PN Wireless G modem router and I'd rather be using Wireless N. Anyway, the place we have moved into has only one phone point in the hallway, has the best TV point in one room and the best place to put the TV and other entertainment stuff in yet another room. So, networking the house up for Internet and TV is required. The diagram below shows the things that I'll have in my home network but there are three points where I'm not quite sure what hardware to us. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a Media Centre/PC and a couple of consoles to the network. I'm pretty much settled on us an Acer Aspire Revo R3600 as my media PC, probably with Ubuntu or Windows and XBMC installed. Wireless Access Point/Bridge, that acts only as a wireless to wire bridge and not an AP, that links up a device that can decode and stream TV from a TV aerial across the network. The device that is connected to 2). At the moment I'm considering a HDHomeRun by SiliconDust. At the moment I'm considering either the TP LINK TL-WA701ND 150Mbps Wireless Lite N Access Point (very cheap at Amazon) or the Netgear 5 GHz Wireless-N HD Access Point/Bridge. I'd love to get some insight into what you would do in my situation. What Wireless Access Point/Bridge should I put at points 1) and 2)? What device should I choose for point 3) that can decode and stream a TV signal? Is the Acer Aspire Revo R3600 a good choice? ![alt text][6] Note 2: I've also posted this question on AVForums.

  Read the article

• How to add user in a group in windows vista home

  - by Daziplqa

  How to add user in a group in windows vista home?

  Read the article

• How to change local user home folder on Windows 2000 and above

  - by Adi Roiban

  I was using a local account on a Windows 7 desktop that is not connected to any Active Directory. After a while it was required to rename the local account. Renaming the account was simple using Local users and groups management tool. After renaming the user, the user home folder was not renamed and I could not find any information about how to change user home folder. I found the ProfileList registry folder but maybe there is a command line for doing such changes. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Any help is much appreciated. Thanks!

  Read the article

• Force copy files off CRC error filled hard drive

  - by TheLakersHighlights

  So I got a dying Western Digital hard drive here and I have a new Western Digital hard drive to transfer all the data to. I have the new HDD hooked up by a SATA to USB. I want to transfer all the pictures, etc to the new HDD. I am unable to because of the CRC error. I have ran chkdsk /f /r and it didnt work because the drive is just simply dying. What tool will let me bypass CRC and continue on with the copying? OS: Vista Home Prem. 32bit

  Read the article

• How to change local user home folder on Windows 2000 and above

  - by Adi Roiban

  I was using a local account on a Windows 7 desktop that is not connected to any Active Directory. After a while it was required to rename the local account. Renaming the account was simple using Local users and groups management tool. After renaming the user, the user home folder was not renamed and I could not find any information about how to change user home folder. I found the ProfileList registry folder but maybe there is a command line for doing such changes. HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList Any help is much appreciated. Thanks!

  Read the article

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• How to know which block device maps to which physical drive

  - by Karolis T.

  I have a server with software RAID 1, two hot-swap sata disks. One hard drive started showing errors, I'm thinking about removing and replacing it, only problem is that I have no idea which of the two correspond to which devices. And I can't shut the server down to find out. I have /dev/sda and /dev/sdb, /dev/sda is the failing one. Thought about doing something along the lines # mdadm --manage /dev/md0 --remove /dev/sda1 then somehow stop/suspend the drive using tuning software and try to listen which of the two stopped, but that's not gonna work in a noisy server environment. Drive panels have no LEDs. Thanks for any ideas!

  Read the article

• What is a usable throughput for a home media server

  - by Craig

  I am looking to setup a home server that will act as a media server. This will include both video (possibly HD) and audio. The clients will be a fun mix of hardware but that is a different question. What I want to know is what is the minimum throughput for streaming video without hitches? Is there a "sweet" spot for throughput (price vs. throughput)? I am determining my budget for this "upgrade" and I need to evaluate wether or not upgrading to a 1 Gbps home LAN is required. Sure, it would be sweet and easily handle the traffic but I don't want to do it unless it is necesary.

  Read the article

• Finding the A Record for a Home Server [closed]

  - by Ryan Allred

  I have a hosted website that allows me to add subdomains and point them to different locations on the server. I also know that I can change the 'A Record' to point it to a different IP address. Now, here's the question, I have a home server that I need to access though this hosted website's domain name. How would I go about setting up the 'A Record' on the server to point to my home server. I'm usually pretty good about keyword searches but on this one, I'm pretty lost as to what to search for.

  Read the article

• Boot drive is incorrect one.

  - by Dwayne

  I have several hard drives installed. I normally use c: as my boot drive and a much larger drive (h:) for storing most of my files. I found a subfolder in my c:windows folder named windows after a failed reinstall of Vista. Upon inspection I determined it to be older than the c:windows folder and therefore it must be the older, working version of the boot. I renamed the c:windows folder to c:windows.bad and moved the sub windows to the c: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the c: copy and can I delete the c:windows.bad file set?

  Read the article

• I can't get router and switches configured properly for my home office network

  - by BernicusMaximus

  Networking Gurus, I recently built a new detached garage, with an office above. As such I had it tied into my existing home ethernet wiring. The ethernet signal is coming into the garage just fine, but I can not get my network configured the way I want because of problems trying to link the various router/switch devices. Please see the following links for the network diagrams: Home Network So basically, I can't my future state to work. I'm not sure if I'm using incompatible switches or what, but I tried the future state with some 4 port switches from best buy and had no luck. I resorted to setting up the Current State so I could operate. What I am looking for is help on how best to get my future state to work. Is this possible with my current configuration, and if not, what should I do? Any help is appreciated. Thanks, Bernie

  Read the article

• Macbook Pro Hard Drive won't shop up on disk startup

  - by Kristal

  I have a macbook pro from 2007. It came with an installation CD for 10.4.8. The first problem is that it won't even recognize the installation CD even though the CD seems perfectly fine. So I used another installation CD just to get me to the Disc Utility dialogue box. I went through the steps to erase the hard drive. However when I attempted to reboot the machine using Disc Startup there was no option for me to select the hard drive. Of course, since I don't have the appropriate installation disk in it won't let me install anything. What are my options? Do I need to ask Apple to send me a new installation CD for this computer? And why wouldn't the hard drive show up in the Startup options?

  Read the article

• Win 7 move ssd from SATA 1 to SATA 0, drive letter from G: to C:

  - by GaryH

  I got a new SSD, plugged it in on my notebook to the available SATA 1 connector and installed Win7 (Ultimate) on it as drive G:. It is working great. Now I would like to move the SSD to the SATA 0 connector and change the drive letter to C:. The existing 500gb HD that has another copy of Win7 (home) on it I will format and connect to the SATA 1 connector as the G: or some other letter drive. Is this possible? Is there software that will go through the registry and "correct" all of the entries for "G:" for everything installed and fix it all up? Or am I better off biting the bullet and setting the hardware where I want it and doing a fresh install of everything? Thanx, G

  Read the article

• Cloning single disk drive to multiple drives simultaneously

  - by mr.b

  Hi, I am looking for a way to clone single disk drive to more than one disk drive at the same time. I have prepared system images on 1TB disks, and it takes almost 2 hours to clone one disk to another, and then it goes up exponentially, in order to have say 30 disks cloned. If it was possible to clone one disk to more than single target, it would simplify whole procedure a lot. Also, is there something that prevents this kind of operation? I mean, is there some special reason why every disk cloning software that I know about supports only single target drive? Thanks!

  Read the article

• Cloning Win 7 installation from MBR to GPR drive and make it bootable

  - by Nelluk

  I've seen threads on similar topics - such as this one - but the answers never seem to solve how to make it bootable. I have Win 7 64-bit on a PC installed on a 2tb MBR volume. The motherboard is UEFI compatible. I just installed a secondary internal 3TB drive which will be partitioned as GPT. Is there a relatively easy way to clone my installation over to the new drive and have that drive be bootable? I have used EaseUS Partition Master to clone the C volume to the D volume, but that would not boot and I assume the issue is that one is MBR and one is GPT. Is there a process to do this?

  Read the article

• Replacing an ATA-100 hard drive

  - by Pieter

  I was instructed to replace the hard drive in an old laptop, a Dell Latitude D505. I'm suspecting that there was a head crash when someone moved the laptop while it was turned on. In the specifications, I found this about the hard drive: 30GB ATA-100; (4200RPM); 40GB ATA-100 (5400RPM); 60GB ATA-100 (4200RPM) *Optional 40GB (5400) 2nd HDD Module for media bay I'm familiar with SATA and IDE, but ATA-100 doesn't ring a bell. What do I have to take into account when I go look for a replacement hard drive?

  Read the article

• How low-power can a home server get?

  - by Halik

  I've got quite simple question actually. How green, low-power and efficient x86 home server can I build using consumer parts with rather constrained budget. After looking through some Google hits I've found out that system based on dual-core atom, some modest mITX board (gigabit lan, integrated audio and gfx etc), one RAM module and one 'green' WD HDD, powered by picoITX PSU uses about 30W at idle up to 40 at load. Can you get lower (or how much lower) then that? Maybe some VIA nano chips, or single core atom? My home server would take care of some back-upping mixed with little ftp/http traffic.

  Read the article

• Windows 7 Professional doesn't mount my usb flash drive anymore

  - by Valter Henrique

  I have a Kingston flash drive which works fine in every computer that I insert it. But in my Windows 7 it doesn't mount anymore. Why this is happening ? When I insert the flash drive it seems that the Windows 7 recognize it, but when I hover the icon don't show the flash drive to remove it, as usually does. Any idea ? Thanks. Any idea ? Abrir Dispositivos e Impressoras, means, ' Open devices and printers' .

  Read the article

• Can I "reprogram" an American Express USB drive?

  - by SkippyFire

  I recently received a USB drive that looks like a credit card as a promotion. The drive portion flips out to plug it in. When you plug it in, it opens the run dialog, and opens a URL to an American Express web page. I was able to find it in the Device Manager: But I don't know what else to do? Is there a way I can convert this into a plain old USB drive? Or better yet, can I modify the command that it runs when inserted into a computer?

  Read the article

• Cloning Windows 7 installation from MBR to GPR drive and make it bootable

  - by Nelluk

  I've seen threads on similar topics - such as this one - but the answers never seem to solve how to make it bootable. I have Win 7 64-bit on a PC installed on a 2tb MBR volume. The motherboard is UEFI compatible. I just installed a secondary internal 3TB drive which will be partitioned as GPT. Is there a relatively easy way to clone my installation over to the new drive and have that drive be bootable? I have used EaseUS Partition Master to clone the C volume to the D volume, but that would not boot and I assume the issue is that one is MBR and one is GPT. Is there a process to do this?

  Read the article

• USB flash drive unreadable after a few minutes on Windows 8

  - by B Sharp

  I recently got a new computer with Windows 8. I a have a number of large backup files I am moving from my old PC to my new one. I was able to successfully copy the files to a couple 16 GB flash drives. When I try to copy the files to my new computer, the process starts just fine but after copying about 4 GB of files, the copy stops. If I look at the drive in explorer, the drive is there, but I just get a busy cursor that stays indefinitely if I click it. If I unplug the flash drive and plug it back in, everything is fine again... for a couple minutes. I've tried copying from both flash drives with the same result. I've also tested this on the USB 2.0 and 3.0 ports on my motherboard with the same result (the drives are USB 2.0) It's also puzzling that this is happening since I previously used one of the same flash drives to install Windows 8 on this computer in the first place without any difficulty.

  Read the article

• newbie hard drive upgrade question

  - by musoNic80

  I have an Acer Aspire 3500WLMi laptop. It currently has a 40gb hard drive which I would like to upgrade. Could someone talk me through the process? I've listed my concerns/queries... Can I buy and install any 2.5" SATA or IDE hard drive into this machine? Should I buy somesort of USB caddy and clone my existing drive onto the new one via USB then physically swap the drives over? My current disk is partitioned to include a small amount of space for a Ubuntu install. Will a clone keep the current partition sizes or is it best for me to repartition once I've cloned? Many thanks.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >