Search Results

Search found 452 results on 19 pages for 'jumping'.

Page 16/19 | < Previous Page | 12 13 14 15 16 17 18 19  | Next Page >

  • Numbers not adding up? (What am I not understanding here?) [closed]

    - by Milo
    I have the following output: Short version: The last numbers on the S= lines increase by H and SHOULD theoretically be linearly decreasing, ex: -285,-290,-295...but the fourth one jumps to -252. Yet, every other number is linearly increasing. Why is that and how could I fix that? To explain the numbers, it comes from slider value changed. I have a slider whose value is used to generate the float on the next line. Everything should be growing linearly here. This value is used to determine the size of a flow layout and it is also used in conjunction with a scrollbar. But basically I have a background for the flow layout and that number is the start location for rendering it. The numbers should linearly change to create a smooth transition but when that one jumps, it looks weird on screen and I dont understand why the numbers are jumping every X slider value changes. Mathematically what could be causing this? Here is the code for rendering the background and the function that is called when value changes: void LobbyTableManager::renderBG( GraphicsContext* g, agui::Rectangle& absRect, agui::Rectangle& childRect ) { float scale = 0.35f; int w = m_bgSprite->getWidth() * getTableScale() * scale; int h = m_bgSprite->getHeight() * getTableScale() * scale; int numX = ceil(absRect.getWidth() / (float)w) + 2; int numY = ceil(absRect.getHeight() / (float)h) + 2; int startY = childRect.getY(); int numAttempts = 0; while(startY + h < absRect.getY() && numAttempts < 1000) { startY += h; if(moo) { std::cout << startY << ","; } numAttempts++; } g->holdDrawing(); for(int i = 0; i < numX; ++i) { for(int j = 0; j < numY; ++j) { g->drawScaledSprite(m_bgSprite,0,0,m_bgSprite->getWidth(),m_bgSprite->getHeight(), absRect.getX() + (i * w) + (offsetX),absRect.getY() + (j * h) + startY,w,h,0); } } g->unholdDrawing(); g->setClippingRect(cx,cy,cw,ch); } void LobbyTableManager::setTableScale( float scale ) { scale += 0.3f; scale *= 2.0f; float scrollRel = m_vScroll->getRelativeValue(); setScale(scale); rescaleTables(); resizeFlow(); updateScrollBars(); float newVal = scrollRel * m_vScroll->getMaxValue(); m_vScroll->setValue(newVal); } void LobbyTableManager::valueChanged( agui::VScrollBar* source,int val ) { m_flow->setLocation(0,-val); } Any insight on mathematically why the anomaly might happen every Nth time would be helpful. I just dont understand why if every number linearly increates it jumps from -295 to -252! Thanks

    Read the article

  • 2D Tile based Game Collision problem

    - by iNbdy
    I've been trying to program a tile based game, and I'm stuck at the collision detection. Here is my code (not the best ^^): void checkTile(Character *c, int **map) { int x1,x2,y1,y2; /* Character position in the map */ c->upY = (c->y) / TILE_SIZE; // Top left corner c->downY = (c->y + c->h) / TILE_SIZE; // Bottom left corner c->leftX = (c->x) / TILE_SIZE; // Top right corner c->rightX = (c->x + c->w) / TILE_SIZE; // Bottom right corner x1 = (c->x + 10) / TILE_SIZE; // 10px from left side point x2 = (c->x + c->w - 10) / TILE_SIZE; // 10px from right side point y1 = (c->y + 10) / TILE_SIZE; // 10px from top side point y2 = (c->y + c->h - 10) / TILE_SIZE; // 10px from bottom side point /* Top */ if (map[c->upY][x1] > 2 || map[c->upY][x2] > 2) c->topCollision = 1; else c->topCollision = 0; /* Bottom */ if ((map[c->downY][x1] > 2 || map[c->downY][x2] > 2)) c->downCollision = 1; else c->downCollision = 0; /* Left */ if (map[y1][c->leftX] > 2 || map[y2][c->leftX] > 2) c->leftCollision = 1; else c->leftCollision = 0; /* Right */ if (map[y1][c->rightX] > 2 || map[y2][c->rightX] > 2) c->rightCollision = 1; else c->rightCollision = 0; } That calculates 8 collision points My moving function is like that: void movePlayer(Character *c, int **map) { if ((c->dirX == LEFT && !c->leftCollision) || (c->dirX == RIGHT && !c->rightCollision)) c->x += c->vx; if ((c->dirY == UP && !c->topCollision) || (c->dirY == DOWN && !c->downCollision)) c->y += c->vy; checkPosition(c, map); } and the checkPosition: void checkPosition(Character *c, int **map) { checkTile(c, map); if (c->downCollision) { if (c->state != JUMPING) { c->vy = 0; c->y = (c->downY * TILE_SIZE - c->h); } } if (c->leftCollision) { c->vx = 0; c->x = (c->leftX) * TILE_SIZE + TILE_SIZE; } if (c->rightCollision) { c->vx = 0; c->x = c->rightX * TILE_SIZE - c->w; } } This works, but sometimes, when the player is landing on ground, right and left collision points become equal to 1. So it's as if there were collision coming from left or right. Does anyone know why this is doing this?

    Read the article

  • Looking for a real-world example illustrating that composition can be superior to inheritance

    - by Job
    I watched a bunch of lectures on Clojure and functional programming by Rich Hickey as well as some of the SICP lectures, and I am sold on many concepts of functional programming. I incorporated some of them into my C# code at a previous job, and luckily it was easy to write C# code in a more functional style. At my new job we use Python and multiple inheritance is all the rage. My co-workers are very smart but they have to produce code fast given the nature of the company. I am learning both the tools and the codebase, but the architecture itself slows me down as well. I have not written the existing class hierarchy (neither would I be able to remember everything about it), and so, when I started adding a fairly small feature, I realized that I had to read a lot of code in the process. At the surface the code is neatly organized and split into small functions/methods and not copy-paste-repetitive, but the flip side of being not repetitive is that there is some magic functionality hidden somewhere in the hierarchy chain that magically glues things together and does work on my behalf, but it is very hard to find and follow. I had to fire up a profiler and run it through several examples and plot the execution graph as well as step through a debugger a few times, search the code for some substring and just read pages at the time. I am pretty sure that once I am done, my resulting code will be short and neatly organized, and yet not very readable. What I write feels declarative, as if I was writing an XML file that drives some other magic engine, except that there is no clear documentation on what the XML should look like and what the engine does except for the existing examples that I can read as well as the source code for the 'engine'. There has got to be a better way. IMO using composition over inheritance can help quite a bit. That way the computation will be linear rather than jumping all over the hierarchy tree. Whenever the functionality does not quite fit into an inheritance model, it will need to be mangled to fit in, or the entire inheritance hierarchy will need to be refactored/rebalanced, sort of like an unbalanced binary tree needs reshuffling from time to time in order to improve the average seek time. As I mentioned before, my co-workers are very smart; they just have been doing things a certain way and probably have an ability to hold a lot of unrelated crap in their head at once. I want to convince them to give composition and functional as opposed to OOP approach a try. To do that, I need to find some very good material. I do not think that a SCIP lecture or one by Rich Hickey will do - I am afraid it will be flagged down as too academic. Then, simple examples of Dog and Frog and AddressBook classes do not really connivence one way or the other - they show how inheritance can be converted to composition but not why it is truly and objectively better. What I am looking for is some real-world example of code that has been written with a lot of inheritance, then hit a wall and re-written in a different style that uses composition. Perhaps there is a blog or a chapter. I am looking for something that can summarize and illustrate the sort of pain that I am going through. I already have been throwing the phrase "composition over inheritance" around, but it was not received as enthusiastically as I had hoped. I do not want to be perceived as a new guy who likes to complain and bash existing code while looking for a perfect approach while not contributing fast enough. At the same time, my gut is convinced that inheritance is often the instrument of evil and I want to show a better way in a near future. Have you stumbled upon any great resources that can help me?

    Read the article

  • Drawing random smooth lines contained in a square [migrated]

    - by Doug Mercer
    I'm trying to write a matlab function that creates random, smooth trajectories in a square of finite side length. Here is my current attempt at such a procedure: function [] = drawroutes( SideLength, v, t) %DRAWROUTES Summary of this function goes here % Detailed explanation goes here %Some parameters intended to help help keep the particles in the box RandAccel=.01; ConservAccel=0; speedlimit=.1; G=10^(-8); % %Initialize Matrices Ax=zeros(v,10*t); Ay=Ax; vx=Ax; vy=Ax; x=Ax; y=Ax; sx=zeros(v,1); sy=zeros(v,1); % %Define initial position in square x(:,1)=SideLength*.15*ones(v,1)+(SideLength*.7)*rand(v,1); y(:,1)=SideLength*.15*ones(v,1)+(SideLength*.7)*rand(v,1); % for i=2:10*t %Measure minimum particle distance component wise from boundary %for each vehicle BorderGravX=[abs(SideLength*ones(v,1)-x(:,i-1)),abs(x(:,i-1))]'; BorderGravY=[abs(SideLength*ones(v,1)-y(:,i-1)),abs(y(:,i-1))]'; rx=min(BorderGravX)'; ry=min(BorderGravY)'; % %Set the sign of the repulsive force for k=1:v if x(k,i)<.5*SideLength sx(k)=1; else sx(k)=-1; end if y(k,i)<.5*SideLength sy(k)=1; else sy(k)=-1; end end % %Calculate Acceleration w/ random "nudge" and repulive force Ax(:,i)=ConservAccel*Ax(:,i-1)+RandAccel*(rand(v,1)-.5*ones(v,1))+sx*G./rx.^2; Ay(:,i)=ConservAccel*Ay(:,i-1)+RandAccel*(rand(v,1)-.5*ones(v,1))+sy*G./ry.^2; % %Ad hoc method of trying to slow down particles from jumping outside of %feasible region for h=1:v if abs(vx(h,i-1)+Ax(h,i))<speedlimit vx(h,i)=vx(h,i-1)+Ax(h,i); elseif (vx(h,i-1)+Ax(h,i))<-speedlimit vx(h,i)=-speedlimit; else vx(h,i)=speedlimit; end end for h=1:v if abs(vy(h,i-1)+Ay(h,i))<speedlimit vy(h,i)=vy(h,i-1)+Ay(h,i); elseif (vy(h,i-1)+Ay(h,i))<-speedlimit vy(h,i)=-speedlimit; else vy(h,i)=speedlimit; end end % %Update position x(:,i)=x(:,i-1)+(vx(:,i-1)+vx(:,i))/2; y(:,i)=y(:,i-1)+(vy(:,i-1)+vy(:,1))/2; % end %Plot position clf; hold on; axis([-100,SideLength+100,-100,SideLength+100]); cc=hsv(v); for j=1:v plot(x(j,1),y(j,1),'ko') plot(x(j,:),y(j,:),'color',cc(j,:)) end hold off; % end My original plan was to place particles within a square, and move them around by allowing their acceleration in the x and y direction to be governed by a uniformly distributed random variable. To keep the particles within the square, I tried to create a repulsive force that would push the particles away from the boundaries of the square. In practice, the particles tend to leave the desired "feasible" region after a relatively small number of time steps (say, 1000)." I'd love to hear your suggestions on either modifying my existing code or considering the problem from another perspective. When reading the code, please don't feel the need to get hung up on any of the ad hoc parameters at the very beginning of the script. They seem to help, but I don't believe any beside the "G" constant should truly be necessary to make this system work. Here is an example of the current output: Many of the vehicles have found their way outside of the desired square region, [0,400] X [0,400].

    Read the article

  • With a little effort you can &ldquo;SEMI&rdquo;-protect your C# assemblies with obfuscation.

    - by mbcrump
    This method will not protect your assemblies from a experienced hacker. Everyday we see new keygens, cracks, serials being released that contain ways around copy protection from small companies. This is a simple process that will make a lot of hackers quit because so many others use nothing. If you were a thief would you pick the house that has security signs and an alarm or one that has nothing? To so begin: Obfuscation is the concealment of meaning in communication, making it confusing and harder to interpret. Lets begin by looking at the cartoon below:     You are probably familiar with the term and probably ignored this like most programmers ignore user security. Today, I’m going to show you reflection and a way to obfuscate it. Please understand that I am aware of ways around this, but I believe some security is better than no security.  In this sample program below, the code appears exactly as it does in Visual Studio. When the program runs, you get either a true or false in a console window. Sample Program. using System; using System.Diagnostics; using System.Linq;   namespace ObfuscateMe {     class Program     {                static void Main(string[] args)         {               Console.WriteLine(IsProcessOpen("notepad")); //Returns a True or False depending if you have notepad running.             Console.ReadLine();         }             public static bool IsProcessOpen(string name)         {             return Process.GetProcesses().Any(clsProcess => clsProcess.ProcessName.Contains(name));         }     } }   Pretend, that this is a commercial application. The hacker will only have the executable and maybe a few config files, etc. After reviewing the executable, he can determine if it was produced in .NET by examing the file in ILDASM or Redgate’s Reflector. We are going to examine the file using RedGate’s Reflector. Upon launch, we simply drag/drop the exe over to the application. We have the following for the Main method:   and for the IsProcessOpen method:     Without any other knowledge as to how this works, the hacker could export the exe and get vs project build or copy this code in and our application would run. Using Reflector output. using System; using System.Diagnostics; using System.Linq;   namespace ObfuscateMe {     class Program     {                static void Main(string[] args)         {               Console.WriteLine(IsProcessOpen("notepad"));             Console.ReadLine();         }             public static bool IsProcessOpen(string name)         {             return Process.GetProcesses().Any<Process>(delegate(Process clsProcess)             {                 return clsProcess.ProcessName.Contains(name);             });         }       } } The code is not identical, but returns the same value. At this point, with a little bit of effort you could prevent the hacker from reverse engineering your code so quickly by using Eazfuscator.NET. Eazfuscator.NET is just one of many programs built for this. Visual Studio ships with a community version of Dotfoscutor. So download and load Eazfuscator.NET and drag/drop your exectuable/project into the window. It will work for a few minutes depending if you have a quad-core or not. After it finishes, open the executable in RedGate Reflector and you will get the following: Main After Obfuscation IsProcessOpen Method after obfuscation: As you can see with the jumbled characters, it is not as easy as the first example. I am aware of methods around this, but it takes more effort and unless the hacker is up for the challenge, they will just pick another program. This is also helpful if you are a consultant and make clients pay a yearly license fee. This would prevent the average software developer from jumping into your security routine after you have left. I hope this article helped someone. If you have any feedback, please leave it in the comments below.

    Read the article

  • Customer Loyalty vs. Customer Engagement: Who Cares?

    - by Jeb Dasteel-Oracle
    Have you read the recent Forbes OracleVoice blog titled Customer Loyalty is Dead. Long Live Engagement!? If you haven’t, take a look. This article prompted lots of conversation in the social realm. Many who read the article voiced their reactions to the headline and now I’m jumping in to add my view. Normal 0 false false false EN-US X-NONE X-NONE Customer loyalty is still key. It’s the effect and engagement is the cause. We at least know that to be true for our customers. We are in an age where customers are demanding to be heard. We need them to be actively involved – or engaged – as well. Greater levels of customer engagement, properly targeted, positively correlate with satisfaction. Our data has shown us this over and over. Satisfied customers are more loyal and more willing to vocalize their satisfaction through referencing, and are more likely to purchase again, all of which in turn drives incremental revenue – from the customer doing the referencing AND the customer on the receiving end of that reference. Turning this around completely, if we begin to see the level of a customer’s engagement start to wane, this is an indicator that their satisfaction, loyalty, and future revenue are likely at risk. At Oracle, we’ve put in place many programs to target, encourage, and then track engagement, allowing us to measure engagement as a determinant of loyalty. Some of these programs include our Key Accounts, solution design and architectural, Executive Sponsorship, as well as executive advisory boards. Specific programs allow us to engage specific contacts within specific customer organizations (based on role) and then systematically track their engagement activities over time, along side of tracking customer satisfaction, loyalty, referenceability, and incremental revenue contribution. Continuous measurement of engagement allows us to better understand customer views of what it means to partner with a provider and adjust program participation to better meet the needs of the partnership. We can also track across customer segments, and design new programs that are even more effective than the ones we have in place today. In case you missed any of my previous Forbes articles, I’ve included links below for easy access. Award-Winning Companies Put Customers First The Power of Peer Networks: 5 Reasons to Get (and Stay) Involved Technology At Work: Traveling In Style Customer Central: 8 Strategies for Putting Customers at the Core of Your Business Technology at Work: Five Companies Doing IT Right /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Difficulties with rotation of a sprite

    - by Andy
    I want to program a dolphin that jumps and rotates like a real dolphin. Jumping is not the problem, but I don't know how to make the rotation. My dolphin always rests in the same angle while it jumps. But I want that it changes the rotation during the jump, like a real dolphin does. How can I improve the rotation? public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Texture2D image, water; float Gravity = 5.0F; float Acceleration = 20.0F; Vector2 Position = new Vector2(1200,720); Vector2 Velocity; float rotation = 0; SpriteEffects flip; Vector2 Speed = new Vector2(0, 0); public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 720; } protected override void Initialize() { base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); image = Content.Load<Texture2D>("cartoondolphin"); water = Content.Load<Texture2D>("background"); flip = SpriteEffects.None; } protected override void Update(GameTime gameTime) { float VelocityX = 0f; float VelocityY = 0f; float time = (float)gameTime.ElapsedGameTime.TotalSeconds; KeyboardState kbState = Keyboard.GetState(); if(kbState.IsKeyDown(Keys.Left)) { rotation = 0; flip = SpriteEffects.None; VelocityX += -5f; } if(kbState.IsKeyDown(Keys.Right)) { rotation = 0; flip = SpriteEffects.FlipHorizontally; VelocityX += 5f; } // jump if the dolphin is under water if(Position.Y >= 670) { if (kbState.IsKeyDown(Keys.A)) { if (flip == SpriteEffects.None) { rotation = 45; VelocityY += 40f; } else { rotation = -45; VelocityY += 40f; } } } else { VelocityY += -10f; } float deltaY = 0; float deltaX = 0; deltaY = Gravity * (float)gameTime.ElapsedGameTime.TotalSeconds; deltaX += VelocityX * (float)gameTime.ElapsedGameTime.TotalSeconds * Acceleration; deltaY += -VelocityY * (float)gameTime.ElapsedGameTime.TotalSeconds * Acceleration; Speed = new Vector2(Speed.X + deltaX, Speed.Y + deltaY); Position += Speed * (float)gameTime.ElapsedGameTime.TotalSeconds; Velocity.X = 0; if (Position.Y + image.Height/2 > graphics.PreferredBackBufferHeight) Position.Y = graphics.PreferredBackBufferHeight - image.Height/2; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); spriteBatch.Draw(water, new Rectangle(0, graphics.PreferredBackBufferHeight -100, graphics.PreferredBackBufferWidth, 100), Color.White); spriteBatch.Draw(image, Position, null, Color.White, MathHelper.ToRadians(rotation), new Vector2(image.Width / 2, image.Height / 2), 1, flip, 1); spriteBatch.End(); base.Draw(gameTime); } }

    Read the article

  • "Error loading operating system": Win7/Vista

    - by LookitsPuck
    Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

    Read the article

  • "Error loading operating system": Win7/Vista

    - by LookitsPuck
    Hey fellas, Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

    Read the article

  • Too many TIME_WAIT state connections!

    - by Hamza
    I've been reading about this everywhere all day, and from what I've gathered, TIME_WAIT is a relatively harmless state. It's supposed to be harmless even when there's too many. But if they're jumping to the numbers I've been seeing for the past 24 hours, something is really wrong! [root@1 ~]# netstat -nat | awk '{print $6}' | sort | uniq -c | sort -n 1 established) 1 Foreign 12 CLOSE_WAIT 15 LISTEN 64 LAST_ACK 201 FIN_WAIT2 334 CLOSING 605 ESTABLISHED 816 SYN_RECV 981 FIN_WAIT1 26830 TIME_WAIT That number fluctuates from 20,000 to 30,000+ (so far, the maximum I've seen it go is 32,000). What worries me is that they're all different IP addresses from all sorts of random locations. Now this is supposed to be (or was supposed to be) a DDoS attack. I know this for a fact, but I won't go into the boring details. It started out as a DDoS and it did impact my server's performance for a couple minutes. After that, everything was back to normal. My server load is normal. My internet traffic is normal. No server resource is being abused. My sites load fine. I also have IPTABLES disabled. There's an odd issue with that too. Every time I enable the firewall/iptables, my server starts experiencing packet loss. Lots of it. About 50%-60% packets are lost. It happens within an hour or within a few hours of enabling the firewall. As soon as I disable it, ping responses from all locations I test them from start clearing up and get stable again. Very strange. The TIME_WAIT state connections have been fluctuating at those numbers since yesterday. For 24 hours now, I've had that, and although it hasn't impacted performance in any way, it's disturbing enough. My current tcp_fin_timeout value is 30 seconds, from the default 60 seconds. However, that seems to not help, at all. Any ideas, suggestions? Anything at all would be appreciated, really!

    Read the article

  • MBPro, mid 2010 can't see Dlink DIR655 signal after sleep etc

    - by user88114
    This is my son's MBP 7,1 running Snow Leopard 10.6.7. Router signal is fine since iPad, Wintel on same table 20 feet from router are fine. the MBP however frequently wakes and fails to find the internet. iStumbler can see 1 neighbours hub and my garden hub are there but can't get to the normal DIR655 wifi... no ping no en0 or en1 device seems to exist. Airport off and on does not help. He just resets router and it all works but this does not please me! I must admit the winter sometimes seems to loose connect too, but less so. The DIR655 (hardware rev A3) is on the original EU firmware 1.10, I'm cautious about jumping to latest 1.31EU since no downgrade seems to be possible and that feels a bit risky as so much is set up and working fine. If I use the DIR655 admin web and release the lease the MBP has then wake it all worked OK. So I suspect lease timing/locking issue but unsure how to check up, plus why iStumbler seems to say the network is not visible at all when I sit on the iPad right next to it just fine.. I do not think there are any channel overlaps and we also have RFquiet DECT phones (Orchid) that are silent until lifted or called. Anyway signals all show low interference and high throughput except for this failure to connect. Just walked the MBP to the garden office and iStumbler now sees the more distant DIR655 signal although it will not connect to it (does not show under Sys Prefs NetNetwork names) even after airport off & on... It also refuses to connect to my garden network (an old Belkin acting as AP wired to DIR655), the signal it can see and even net name in Sys Prefs NetNetwork names (2 mins later):NOW both names ARE visible, but both fail to accept the correct WPA2 password and keep asking again after failing to connect. IT ALL MAKES NO SENSE TO ME. Just revoked the lease for the MBP on DIR655 and no changes although this seemed to help MBP wake into connection 1 hour ago. OK a bit of walking about to report. Carried MBP across garden towards DIR655, a few other wifis show up on iStumbler, low signals all channel 1. Right next to DIR655 but iStumbler not showing it, although most other wifi's have gone. I'd say iStubler is suffering timeouts&hangs but hard to be sure. Lots of attempts to Airport on/off, join other etc and suddenly I get to connect, get given new IP (I revoked), can browse. Walk away, connection drops quite soon at 30 feet then reconnected briefly then died again. MUST ATTEND ELSEWHERE FOR A BIT...

    Read the article

  • Vim configuration slow in Terminal & iTerm2 but not in MacVim

    - by Jey Balachandran
    Ideally, I want to use Vim from Terminal or iTerm2. However, it becomes unbearably slow so I had to resort to using MacVim. There is nothing wrong with MacVim, however my workflow would be much smoother if I used only Terminal/iTerm2. When its slow Loading files, in particular Rails files takes about 1 - 1.5s. Removing rails.vim decreases this time to 0.5 - 1s. In MacVim this is instantaneous. Scrolling through the rows and columns via h, j, k, l. It progressively gets slower the longer I hold down the keys. Eventually, it starts jumping rows. I have my Key Repeat set to Fast and Delay Until Repeat set to Short. After 10 - 15 minutes of usage, using plugins such as ctrlp or Command-T gets very laggy. I'd type a letter, wait 2 - 3s, then type the next. My Setup 11" MacBook Air running Mac OS X Version 10.7.3 (1.6 Ghz Intel Core 2 Duo, 4 GB DDR3) My dotfiles. > vim --version VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Nov 16 2011 16:44:23) MacOS X (unix) version Included patches: 1-333 Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv -cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg +path_extra -perl +persistent_undo +postscript +printer +profile +python -python3 +quickfix +reltime +rightleft +ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/local/Cellar/vim/7.3.333/share/vim" Compilation: /usr/bin/llvm-gcc -c -I. -Iproto -DHAVE_CONFIG_H -DMACOS_X_UNIX -no-cpp-precomp -O3 -march=core2 -msse4.1 -w -pipe -D_FORTIFY_SOURCE=1 Linking: /usr/bin/llvm-gcc -L. -L/usr/local/lib -o vim -lm -lncurses -liconv -framework Cocoa -framework Python -lruby I've tried running without any plugins or syntax highlighting. It opens files a lot faster but still not as fast as MacVim. But the other two problems still exist. Why is my vim configuration slow? How can I improve the speed of my vim configuration within Terminal or iTerm2?

    Read the article

  • High load on X3220 Quad Core Linux Apache server

    - by John Templar
    I'm seriously in need of help. My sites are now nearly impossible to use because of massive loads on my server. I'm already a month late on my mortgage and this really isn't helping my situation. I've been working on fixing this intermittent load problem for months (never this bad). I'm suspecting some kind of attack since I'm under DDOS attack a lot! I've been trying to figure out what is causing the load but I'm afraid I just don't have the experience or knowledge to understand all the data I've been looking at. I don't even know where to begin or how to test for the large array of attacks out there. Here's some data you might find useful... Server: Xeon X3220 Quad Core 2.4 GHz - Linux, FreeBSD 500 GB HD and 8 Gig of Ram. Runs Centos release 5.7 Server Version: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_qos/9.74 Warning: All sites are softcore adult sites - mostly fantasy art like elves and amazons. 1) Sites may run fine for weeks or just days at less than 10 load then start jumping to 40-80 load - no idea why. Same sites, same mods, same amount of traffic - just WHAM! 2) I get an email almost every day that says: "Large Number of Failed Login Attempts from IP (different each time)". My webhost (who almost never helps me) told me it was a udp flood or something. 3) I've changed the port for MySQL from the default. If I ever put it back to the default - I get Loads of over 100 from what must be a constant mysql port flood. 4) I've reconfigured MYSQL. Link: http://www.deadlyamazons.com/logs/mycnf.txt 5) I have 3 Joomla Jomsocial networks. I've spent a couple weeks turning all the mods/plugins off, waiting a day and then turning them back on the next day or later if there isn't any change (there hasn't been). For example, on Thursday I'll turn off videos, on Friday I'll turn off chat.. etc and nothing changes the load appreciably. 6) Joomla info: All SEF turned off - sh404sef completely disabled and removed. Components: Joomla 1.5.22, Jomsocial 2.0.5, Kunena 1/31/2011, HWDMediashare 11/22/2010 and JBolo Chat 2.7.3, Comet Chat or Envolve Chat. Page Compression is on, Cache is on 15 mins. Please click on this forum to see links to all my reports: http://forum.joomla.org/viewtopic.php?f=433&t=706035&p=2777500#p2777500 Any help would be highly appreciated.

    Read the article

  • Initial Review - Mastering Unreal Technology I: Introduction to Level Design with Unreal Engine 3

    - by Matt Christian
    Recently I purchased 3 large volumes on using the Unreal 3 Engine to create levels and custom games.  This past weekend I cracked the spine of the first and started reading.  Here are my early impressions (I'm ~250 pages into it, with appendices it's about 900). Pros Interestingly, the book starts with an overview of the Unreal engines leading up to Unreal 3 (including Gears of War) and follows with some discussion on planning a mod and what goes into the game development process.  This is nice for an intro to the book and is much preferred rather than a simple chapter detailing what is on the included CD, how to install and setup UnrealEd, etc...  While the chapter on Unreal history and planning can be considered 'fluff', it's much less 'fluffy' than most books provide. I need to mention one thing here that is pretty crucial in the way I'm going to continue reviewing this book.  Most technical books like this are used as a shelf reference; as a thick volume you use for looking up techniques every now and again.  Even so, I prefer reading from cover to cover, including chapters I may already be knowledgable on (I'm sure this is typical for most people).  If there was a chapter on installing UnrealEd (the previously mentioned 'fluff'), I would probably force myself to read it, even though I've installed the game and engine multiple times on different systems. Chapter 3 is where we really get to the introduction piece of UnrealEd, creating your first basic level.  This large chapter details creating two small rooms, adding static meshes, adding lighting, creating and adding particle emitters, creating a door that animates with Unreal Matinee and Kismet, static meshes with physics, and other little additions to make your level look less beginner.  This really is a chapter that overviews the entire rest of the book, as each chapter following details the creation and intermediate usages of Static Meshes, Materials, Lighting, etc... One other very nice part to this book is the way the tutorials are setup.  Each tutorial builds off the previous and all are step-by-step.  If you haven't completed one yet, you can find all the starting files on the CD that comes with the book. Cons While the description of the overview chapter (Chapter 3) is fresh in your mind, let me start the cons by saying this chapter is setup extremely confusing for the noob.  At one point, you end up creating a door mesh and setting it up as a InteropMesh so that it is ready to be animated, only to switch to particles and spend a good portion of time working on a different piece of the level.  Yes, this is actually how I develop my levels (jumping back and forth), though it's very odd for a book to jump out of sequence. The next item might be a positive or a negative depending on your skill level with UnrealEd.  Most of the introduction to the editor layout is found in one of the Appendices instead of before Chapter 3.  For new readers, this might lead to confusion as Appendix A would typically be read between Chapter 2 and 3.  However, this is a positive for those with some experience in UnrealEd as they don't have to force themselves through a 'learn every editor button' chapter.  I'm listing this in the Cons section as the book is 'Introduction to...' and is probably going to be directed toward a lot of very beginner developers. Finally, there's a lack of general description to a lot of the underlying engine and what each piece in UnrealEd is or does.  Sometimes you'll be performing Tutorial after Tutorial with barely a paragraph in between describing ANY of what you've just done.  Tutorial 1.1 Step 6 says to press Button X, so you do.  But why?  This is in part a problem with the structure of the tutorials rather than the content of the book.  Since the tutorials are so focused on a step-by-step (or procedural) description of a process, you learn the process and not why you're doing that.  For example, you might learn how to size a material to a surface, but will only learn what buttons to press and not what each one does. This becomes extremely apparent in the chapter on Static Meshes as most of the chapter is spent in 3D Studio Max.  Since there are books on 3DSM and modelling, the book really only tells you the steps and says to go grab a book on modelling if you're really interested in 3DSM.  Again, I've learned the process to develop my own meshes in 3DSM, but I don't know the why behind the steps. Conclusion So far the book is very good though I would have a hard time recommending it to a complete beginner.  I would suggest anyone looking at this book (obviously including the other 2, more advanced volumes) to pick up a copy of UDK or Unreal 3 (available online or via download services such as Steam) and watch some online tutorials and play with it first.  You'll find plenty of online videos available that were created by the authors and may suit as a better introduction to the editor.

    Read the article

  • Bullet physics debug drawing not working

    - by Krishnabhadra
    Background I am following on from this question, which isn't answered yet. Basically I have a cube and a UVSphere in my scene, with UVSphere on the top of the cube without touching the cube. Both exported from blender. When I run the app The UVSphere does circle around the cube for 3 or 4 times and jump out of the scene. What I actually expect was the sphere to fall on top of the cube. What this question about From the comment to the linked question, I got to know about bullet debug drawing, which helps in debugging by drawing outline of physics bodies which are normally invisible. I did some research on that and came up with the code given below. From whatever I have read, below code should work, but it doesn't. My Code My bullet initialization code. -(void) initializeScene { /*Setup physics world*/ _physicsWorld = [[CC3PhysicsWorld alloc] init]; [_physicsWorld setGravity:0 y:-9.8 z:0]; /*Setting up debug draw*/ MyDebugDraw *draw = new MyDebugDraw; draw->setDebugMode(draw->getDebugMode() | btIDebugDraw::DBG_DrawWireframe ); _physicsWorld._discreteDynamicsWorld->setDebugDrawer(draw); /*Setup camera and lamb*/ ………….. //This simpleCube.pod contains the cube [self addContentFromPODFile: @"simpleCube.pod"]; //This file contains sphere [self addContentFromPODFile: @"SimpleSphere.pod"]; [self createGLBuffers]; CC3MeshNode* cubeNode = (CC3MeshNode*)[self getNodeNamed:@"Cube"]; CC3MeshNode* sphereNode = (CC3MeshNode*)[self getNodeNamed:@"Sphere"]; // both cubeNode and sphereNode are not nil from this point float *cVertexData = (float*)((CC3VertexArrayMesh*)cubeNode.mesh) .vertexLocations.vertices; int cVertexCount = ((CC3VertexArrayMesh*)cubeNode.mesh) .vertexLocations.vertexCount; btTriangleMesh* cTriangleMesh = new btTriangleMesh(); int offset = 0; for (int i = 0; i < (cVertexCount / 3); i++) { unsigned int index1 = offset; unsigned int index2 = offset+6; unsigned int index3 = offset+12; cTriangleMesh->addTriangle( btVector3(cVertexData[index1], cVertexData[index1+1], cVertexData[index1+2]), btVector3(cVertexData[index2], cVertexData[index2+1], cVertexData[index2+2]), btVector3(cVertexData[index3], cVertexData[index3+1], cVertexData[index3+2])); offset += 18; } [self releaseRedundantData]; /*Create a triangle mesh from the vertices*/ btBvhTriangleMeshShape* cTriMeshShape = new btBvhTriangleMeshShape(cTriangleMesh,true); btCollisionShape *sphereShape = new btSphereShape(1); gTriMeshObject = [_physicsWorld createPhysicsObjectTrimesh:cubeNode shape:cTriMeshShape mass:0 restitution:1.0 position:cubeNode.location]; sphereObject = [_physicsWorld createPhysicsObject:sphereNode shape:sphereShape mass:1 restitution:0.1 position:sphereNode.location]; sphereObject.rigidBody->setDamping(0.1,0.8); /*Enable debug drawing*/ _physicsWorld._discreteDynamicsWorld->debugDrawWorld(); } And My btIDebugDraw implementation (MyDebugDraw.h) //MyDebugDraw.h class MyDebugDraw: public btIDebugDraw{ int m_debugMode; public: virtual void drawLine(const btVector3& from,const btVector3& to ,const btVector3& color); virtual void drawContactPoint(const btVector3& PointOnB ,const btVector3& normalOnB,btScalar distance ,int lifeTime,const btVector3& color); virtual void reportErrorWarning(const char* warningString); virtual void draw3dText(const btVector3& location ,const char* textString); virtual void setDebugMode(int debugMode); virtual int getDebugMode() const; }; void MyDebugDraw::drawLine(const btVector3& from,const btVector3& to ,const btVector3& color){ LogInfo(@"Works!!"); glPushMatrix(); glColor4f(color.getX(), color.getY(), color.getZ(), 1.0); const GLfloat line[] = { from.getX()*1, from.getY()*1, from.getZ()*1, //point A to.getX()*1, to.getY()*1,to.getZ()*1 //point B }; glVertexPointer( 3, GL_FLOAT, 0, &line ); glPointSize( 5.0f ); glDrawArrays( GL_POINTS, 0, 2 ); glDrawArrays( GL_LINES, 0, 2 ); glPopMatrix(); } void MyDebugDraw::drawContactPoint(const btVector3 &PointOnB ,const btVector3 &normalOnB, btScalar distance ,int lifeTime, const btVector3 &color){ } void MyDebugDraw::reportErrorWarning(const char *warningString){ } void MyDebugDraw::draw3dText(const btVector3 &location , const char *textString){ } void MyDebugDraw::setDebugMode(int debugMode){ } int MyDebugDraw::getDebugMode() const{ return DBG_DrawWireframe; } My Problem The drawLine method is getting called. I can see the cube and sphere in place. Sphere again does some circling around the cube before jumping off. No debug lines are getting drawn.

    Read the article

  • Top ten things that don't make sense in The Walking Dead

    - by iamjames
    For those of you that don't know, The Walking Dead is a popular American TV show on AMC about a group of people trying to survive in a zombie-filled world.Here's the top ten eleven things that don't make sense on the show (and have never been explained) 1)  They never visit stores.  No Walmarts, Kmarts, Targets, shopping malls, pawn shops, gas stations, etc.  You'd think that would be the first place you'd visit for supplies, but they never have.  Not once.  There was a tiny corner store they visited in a small town, and while many products were already gone they did find several useful items.  2)  They never raid houses.  Why not?  One would imagine that they would want to search houses for useful items, but they don't.3)  They don't use 2 way radios.  Modern 2-way radios have a 36-mile range.  That's probably best possible range, but even if the range is only 10% of that, 3.6 miles, that's still more than enough for most situations, for the occasional "hey zombies attacking can you give me a hand?" or "there's zombies walking by stay inside until they leave" or "remember to pick up milk at the store love mom".  And yes they would need batteries or recharging, but they have been using gas-powered generators on the show and I'm sure a car charger would work.4)  They use gas-guzzling vehicles.  Every vehicle they have is from the 80s or 90s except for the new Kia SUV there for product placement.  Why?  They should all be driving new small SUVs or hybrids.  Visit a dealership and steal more fuel-efficient vehicles, because while the Walmart's might be empty from people raiding them for supplies, I'm sure most people weren't thinking "Gee, I should go car shopping" when the infection hit5)  They drive a motorcycle.  Seriously?  Let's find the least protective vehicle and drive that.  And while motorcycles get reasonable gas mileage, 5 people in a SUV gets better gas mileage per person than 5 people all driving motorcycles so it doesn't make economical sense either.6)  They drive loud vehicles.  The motorcycle used is commonly referred to as a chopper and is about as loud as a motorcycle can get.  The zombies are attracted to loud noise, so wouldn't it make more sense to drive vehicles that makes less sound?  Because as soon as you stop the bike and get off you're surrounded by zombies that heard you coming.  And it's not just the bike, the ~1980s Chevy SUV in the show is also very loud.7)  They never run out of food.  Seems like that would be a almost daily struggle, keeping enough food available for about a dozen people, yet I've never seen them visit a grocery store or local convenience store to stock up.8)  They don't carry swords, machetes, clubs, etc.  Let's face it, biting is not a very effective means of attack.  It's good for animals because they have fangs and little else, but humans have been finding better ways of killing each other since forever.  So why doesn't everyone on the show carry a sword or machete or at least a baseball bat?  Anything is better than wasting valuable bullets all the time.  Sure, dozen zombies approaching?  Shoot them.  One zombie approaching?  Save the bullet, cut off it's head.  9)  They do not wear protective clothing.  Human teeth are not exactly the sharpest teeth in the animal kingdom.  The leather shoes your dog ripped to shreds within minutes would probably take you days to bite through.  So why do they walk around half-naked?  Yes I know it's hot in Atlanta, but you'd think they'd at least have some tough leather coats or something for protection.  Maybe put a few small vent holes in the fabric if it's really hot.  Or better:  make your own chainmail.  Chainmail was used for thousands of years for protection from swords and is still used by scuba divers for protection from sharks.  If swords and sharks can't puncture it, human teeth don't stand a chance.  10)  They don't build barricades or dig trenches around properties.  In Season 2 they stayed at a farm in the middle of no where.  While being far away from people is a great way to stay far away from zombies, it would still make sense to build some sort of defenses.  Hordes of zombies would knock down almost any fence, but what about a trench or moat?  Maybe something not too wide so it can be jumped over easily but a zombie would fall into because I haven't seen too many jumping zombies on the show.  11)  They don't live in a mall or tall office building.  A mall would be perfect.  They have large security gates designed to keep even hundreds of people from breaking in and offer lots of supplies and food.  They're usually hundreds of thousands of square feet and fully enclosed, one could probably live their entire life happily in a mall.  Tall office building with on-site cafeteria would be another good choice.  They also usually offer good security and office furniture could be pushed out of the windows to crush approaching zombies, and the cafeteria is usually stocked to provide food for hundreds or thousands of office workers so food wouldn't be a problem for a long time. So there you have it, eleven things that don't make sense in The Walking Dead.  Have any of your own you'd like to add or were one of these things covered in the show?  Let me know in the comments.

    Read the article

  • Override an IOCTL Handler in PQOAL

    - by Kate Moss' Big Fan
    When porting or creating a BSP to a new platform, we often need to make change to OEMIoControl or HAL IOCTL handler for more specific. Since Microsoft introduced PQOAL in CE 5.0 and more and more BSP today leverages PQOAL to simplify the OAL, we no longer define the OEMIoControl directly. It is somehow analogous to migrate from pure Windows SDK to MFC; people starts to define those MFC handlers and forgot the WinMain and the big message loop. If you ever take a look at the interface between OAL and Kernel, PUBLIC\COMMON\OAK\INC\oemglobal.h, the pfnOEMIoctl is still there just as the entry point of Windows Program is WinMain since day one. (For those may argue about pfnOEMIoctl is not OEMIoControl, I will encourage you to dig into PRIVATE\WINCEOS\COREOS\NK\OEMMAIN\oemglobal.c which initialized pfnOEMIoctl to OEMIoControl. The interface is just to split OAL and Kernel which no longer linked to one executable file in CE 6, all of the function signature is still identical) So let's trace into PQOAL to realize how it implements OEMIoControl and how can we override an IOCTL handler we interest. First thing to know is the entry point (just as finding the WinMain in MFC), OEMIoControl is defined in PLATFORM\COMMON\SRC\COMMON\IOCTL\ioctl.c. Basically, it does nothing special but scan a pre-defined IOCTL table, g_oalIoCtlTable, and then execute the handler. (The highlight part) Other than that is just for error handling and the use of critical section to serialize the function. BOOL OEMIoControl(     DWORD code, VOID *pInBuffer, DWORD inSize, VOID *pOutBuffer, DWORD outSize,     DWORD *pOutSize ) {     BOOL rc = FALSE;     UINT32 i; ...     // Search the IOCTL table for the requested code.     for (i = 0; g_oalIoCtlTable[i].pfnHandler != NULL; i++) {         if (g_oalIoCtlTable[i].code == code) break;     }     // Indicate unsupported code     if (g_oalIoCtlTable[i].pfnHandler == NULL) {         NKSetLastError(ERROR_NOT_SUPPORTED);         OALMSG(OAL_IOCTL, (             L"OEMIoControl: Unsupported Code 0x%x - device 0x%04x func %d\r\n",             code, code >> 16, (code >> 2)&0x0FFF         ));         goto cleanUp;     }            // Take critical section if required (after postinit & no flag)     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Take critical section                    EnterCriticalSection(&g_ioctlState.cs);     }     // Execute the handler     rc = g_oalIoCtlTable[i].pfnHandler(         code, pInBuffer, inSize, pOutBuffer, outSize, pOutSize     );     // Release critical section if it was taken above     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Release critical section                    LeaveCriticalSection(&g_ioctlState.cs);     } cleanUp:     OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OEMIoControl(rc = %d)\r\n", rc ));     return rc; }   Where is the g_oalIoCtlTable? It is defined in your BSP. Let's use DeviceEmulator BSP as an example. The PLATFORM\DEVICEEMULATOR\SRC\OAL\OALLIB\ioctl.c defines the table as const OAL_IOCTL_HANDLER g_oalIoCtlTable[] = { #include "ioctl_tab.h" }; And that leads to PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h which defined some of IOCTL handler but others are defined in oal_ioctl_tab.h which is under PLATFORM\COMMON\SRC\INC\. Finally, we got the full table body! (Just like tracing MFC, always jumping back and forth). The format of table is very straight forward, IOCTL code, Flags and Handler Function // IOCTL CODE,                          Flags   Handler Function //------------------------------------------------------------------------------ { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlHalInitRegistry     }, { IOCTL_HAL_INIT_RTC,                       0,  OALIoCtlHalInitRTC          }, { IOCTL_HAL_REBOOT,                         0,  OALIoCtlHalReboot           }, The PQOAL scans through the table until it find a matched IOCTL code, then invokes the handler function. Since it scans the table from the top which means if we define TWO handler with same IOCTL code, the first one is always invoked with no exception. Now back to the PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h, with the following table { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlDeviceEmulatorHalInitRegistry     }, ... #include <oal_ioctl_tab.h> Note the IOCTL_HAL_INITREGISTRY handler are defined in both BSP's local ioctl_tab.h and the common oal_ioctl_tab.h, but due to BSP's local handler comes before "#include <oal_ioctl_tab.h>" so we know the OALIoCtlDeviceEmulatorHalInitRegistry always get called. In this example, the DeviceEmulator BSP overrides the IOCTL_HAL_INITREGISTRY handler from OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry by manipulating the g_oalIoCtlTable table. (In some point of view, it is similar to message map in MFC) Please be aware, when you override an IOCTL handler in PQOAL, you may want to clone the original implementation to your BSP and change to meet your need. It is recommended and save you the redundant works but remember to rename the handler function (Just like the DeviceEmulator it changes the name of OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry). If you don't change the name, linker may not be happy (due to name conflict) and the more important is by using different handler name, you could always redirect the handler back to original one. (It is like the concept of OOP that calling a function in base class; still not so clear? I am goinf to show you soon!) The OALIoCtlDeviceEmulatorHalInitRegistry setups DeviceEmulator specific registry settings and in the end, if everything goes well, it calls the OALIoCtlHalInitRegistry (PLATFORM\COMMON\SRC\COMMON\IOCTL\reginit.c) to do the rest.     if(fOk) {         fOk = OALIoCtlHalInitRegistry(code, pInpBuffer, inpSize, pOutBuffer,             outSize, pOutSize);     } Now you got the picture, whenever you want to override an IOCTL hadnler that is implemented in PQOAL just Clone the handler function to your BSP as a template. Simple name change for the handler function, and a name change in the IOCTL table header file that maps the IOCTL with the function Implement your IOCTL handler and whenever you need to redirect it back just calling the original handler function. It is the standard way of implementing a custom IOCTL and most Microsoft developers prefer. The mapping of IOCTL routine to IOCTL code is platform specific - you control the header file that does that mapping.

    Read the article

  • Phones, Nokia, Microsoft and More

    - by Bill Evjen
    The phone revolution that is under way at the moment is insanely interesting and continuously full of buzz about directions, failures, and promises. The movement started with Apple completely reinventing what a smart phone was all about and now we have the followers. Though – don’t dismiss the followers, they are usually the ones that come out with the leap frog products when most of the world is thinking about jumping on. Remember the often used analogy – the USA invented the TV – but it was Japan that took it to the next level and now all TVs are from somewhere else other than the USA. Really there are two camps for the phones – the Cool Kids and other kids that no one wants to hang out with anymore. When it comes to cool – for some reason, the phone is an important part of that factor. Everyone wants to show their phone and its configuration (apps installed, etc) to their friends as a sign of (1) “I have money” and (2) I have smarts/tastes/style/etc when it comes to my applications that are on my phone. For those that don’t know – the Cool Kids include: Apple – this is quite obvious as everything Apple produces is in the cool camp. Just having an Apple product on your person means you can dance. Google – this is one of the more interesting releases as they have created something called Android (which in it’s own right is a major brand in itself). Microsoft – you might be saying “Really, Microsoft is cool?”. I would argue that they are indeed cool as it is now associated with XBOX 360, Kinect, and Windows 7. Gone are the days of Bob and that silly paperclip. Well – that’s it. There is nobody else I would stick in that camp. The other kids that weren’t picked for that dodgeball team include: Nokia Motorola Palm Blackberry and many many more The sad part of all this is that no matter what this second camp does now, it won’t be able to get out of this bucket easily. They will always be associated as yesterday’s technology and that association will drive the sales of the phone purchasers of the world. For those in that group, the only possible way out is to get invited to the cool club by one of the cool club members in the hope that their coolness somehow rubs off. To me, this is the move that Nokia is making. They are at this point where they have realized that they don’t have the full scope of the required end to end solution to make this all work. They have the plants to build the phones and the reach of the retailers that sell what they have. What they are missing is the proper operating system for the new world of multi-touch form factor phones. Even the companies that come up with some sort of new operating system for this type of new device, they are still associated with the yesterday and lack the developer community behind them to be the real wave of adoption that this market needs. Think about that – this is a major different between Nokia/Blackberry when you compare it to the likes of Apple, Google, and Microsoft. These three powerhouses having a very large and strong development community that will eagerly take on new initiatives using the skillsets that they have already cultivated over the years of already working with the company. This then results in a plethora of applications that are then placed on an app store of some kind. The developer gets a cut and then Apple/Google/Microsoft then get their cut. It is definitely a win-win. None of the other phone companies and wannabies can provide the same results. What Microsoft was missing was the major phone manufactures coming on board to create and push forward with the phones that are required to start the wave. This is where Nokia can come in and help Microsoft. They have the ability to promote the Windows Phone operating system on a new wave of phones. This does mean that Nokia will sell phones, but they lose out on the application store that they might have been thinking about making some money on as well as controlling the end to end solution. What is interesting is in questioning to oneself if Microsoft will purchase Nokia. It really depends upon how they want to compete and with whom Microsoft views as the major competitor. For instance, they can purchase Nokia and have their own hardware company and distribution network for phones – thereby taking on a model that is quite similar to Apple. On the other hand, they could just leave it up to the phone hardware companies such as Nokia and others to build and promote phones in a model that is similar to Google. Both ways have pluses and minuses. If they own the phone manufacturer, they really can put some thought into the design and technical specifications of the phone that is really designed to exactly how they want it. Microsoft has shown that they have this ability – especially with the XBOX initiative they have done over the years. Think about how good and powerful they have moved forward with XBOX – and I am not talking about just copying what others are doing, but coming up with leapfrog products that are steps ahead of everyone else. Though, if they didn’t do it themselves, they could then leave it up to the phone manufacturers to drive each other to build better and better phones that run the Microsoft OS – competition drives better products. We have seen this with the Android line of phones that are out there on the market. I have read a lot about Nokia investors really upset about the new Microsoft relationship – but really, this is a great thing. I for one am a fan of this relationship (I am also a Nokia stock holder btw). This will mean better days for Nokia.

    Read the article

  • Relative cam movement and momentum on arbitrary surface

    - by user29244
    I have been working on a game for quite long, think sonic classic physics in 3D or tony hawk psx, with unity3D. However I'm stuck at the most fundamental aspect of movement. The requirement is that I need to move the character in mario 64 fashion (or sonic adventure) aka relative cam input: the camera's forward direction always point input forward the screen, left or right input point toward left or right of the screen. when input are resting, the camera direction is independent from the character direction and the camera can orbit the character when input are pressed the character rotate itself until his direction align with the direction the input is pointing at. It's super easy to do as long your movement are parallel to the global horizontal (or any world axis). However when you try to do this on arbitrary surface (think moving along complex curved surface) with the character sticking to the surface normal (basically moving on wall and ceiling freely), it seems harder. What I want is to achieve the same finesse of movement than in mario but on arbitrary angled surfaces. There is more problem (jumping and transitioning back to the real world alignment and then back on a surface while keeping momentum) but so far I didn't even take off the basics. So far I have accomplish moving along the curved surface and the relative cam input, but for some reason direction fail all the time (point number 3, the character align slowly to the input direction). Do you have an idea how to achieve that? Here is the code and some demo so far: The demo: https://dl.dropbox.com/u/24530447/flash%20build/litesonicengine/LiteSonicEngine5.html Camera code: using UnityEngine; using System.Collections; public class CameraDrive : MonoBehaviour { public GameObject targetObject; public Transform camPivot, camTarget, camRoot, relcamdirDebug; float rot = 0; //---------------------------------------------------------------------------------------------------------- void Start() { this.transform.position = targetObject.transform.position; this.transform.rotation = targetObject.transform.rotation; } void FixedUpdate() { //the pivot system camRoot.position = targetObject.transform.position; //input on pivot orientation rot = 0; float mouse_x = Input.GetAxisRaw( "camera_analog_X" ); // rot = rot + ( 0.1f * Time.deltaTime * mouse_x ); // wrapAngle( rot ); // //when the target object rotate, it rotate too, this should not happen UpdateOrientation(this.transform.forward,targetObject.transform.up); camRoot.transform.RotateAround(camRoot.transform.up,rot); //debug the relcam dir RelativeCamDirection() ; //this camera this.transform.position = camPivot.position; //set the camera to the pivot this.transform.LookAt( camTarget.position ); // } //---------------------------------------------------------------------------------------------------------- public float wrapAngle ( float Degree ) { while (Degree < 0.0f) { Degree = Degree + 360.0f; } while (Degree >= 360.0f) { Degree = Degree - 360.0f; } return Degree; } private void UpdateOrientation( Vector3 forward_vector, Vector3 ground_normal ) { Vector3 projected_forward_to_normal_surface = forward_vector - ( Vector3.Dot( forward_vector, ground_normal ) ) * ground_normal; camRoot.transform.rotation = Quaternion.LookRotation( projected_forward_to_normal_surface, ground_normal ); } float GetOffsetAngle( float targetAngle, float DestAngle ) { return ((targetAngle - DestAngle + 180)% 360) - 180; } //---------------------------------------------------------------------------------------------------------- void OnDrawGizmos() { Gizmos.DrawCube( camPivot.transform.position, new Vector3(1,1,1) ); Gizmos.DrawCube( camTarget.transform.position, new Vector3(1,5,1) ); Gizmos.DrawCube( camRoot.transform.position, new Vector3(1,1,1) ); } void OnGUI() { GUI.Label(new Rect(0,80,1000,20*10), "targetObject.transform.up : " + targetObject.transform.up.ToString()); GUI.Label(new Rect(0,100,1000,20*10), "target euler : " + targetObject.transform.eulerAngles.y.ToString()); GUI.Label(new Rect(0,100,1000,20*10), "rot : " + rot.ToString()); } //---------------------------------------------------------------------------------------------------------- void RelativeCamDirection() { float input_vertical_movement = Input.GetAxisRaw( "Vertical" ), input_horizontal_movement = Input.GetAxisRaw( "Horizontal" ); Vector3 relative_forward = Vector3.forward, relative_right = Vector3.right, relative_direction = ( relative_forward * input_vertical_movement ) + ( relative_right * input_horizontal_movement ) ; MovementController MC = targetObject.GetComponent<MovementController>(); MC.motion = relative_direction.normalized * MC.acceleration * Time.fixedDeltaTime; MC.motion = this.transform.TransformDirection( MC.motion ); //MC.transform.Rotate(Vector3.up, input_horizontal_movement * 10f * Time.fixedDeltaTime); } } Mouvement code: using UnityEngine; using System.Collections; public class MovementController : MonoBehaviour { public float deadZoneValue = 0.1f, angle, acceleration = 50.0f; public Vector3 motion ; //-------------------------------------------------------------------------------------------- void OnGUI() { GUILayout.Label( "transform.rotation : " + transform.rotation ); GUILayout.Label( "transform.position : " + transform.position ); GUILayout.Label( "angle : " + angle ); } void FixedUpdate () { Ray ground_check_ray = new Ray( gameObject.transform.position, -gameObject.transform.up ); RaycastHit raycast_result; Rigidbody rigid_body = gameObject.rigidbody; if ( Physics.Raycast( ground_check_ray, out raycast_result ) ) { Vector3 next_position; //UpdateOrientation( gameObject.transform.forward, raycast_result.normal ); UpdateOrientation( gameObject.transform.forward, raycast_result.normal ); next_position = GetNextPosition( raycast_result.point ); rigid_body.MovePosition( next_position ); } } //-------------------------------------------------------------------------------------------- private void UpdateOrientation( Vector3 forward_vector, Vector3 ground_normal ) { Vector3 projected_forward_to_normal_surface = forward_vector - ( Vector3.Dot( forward_vector, ground_normal ) ) * ground_normal; transform.rotation = Quaternion.LookRotation( projected_forward_to_normal_surface, ground_normal ); } private Vector3 GetNextPosition( Vector3 current_ground_position ) { Vector3 next_position; // //-------------------------------------------------------------------- // angle = 0; // Vector3 dir = this.transform.InverseTransformDirection(motion); // angle = Vector3.Angle(Vector3.forward, dir);// * 1f * Time.fixedDeltaTime; // // if(angle > 0) this.transform.Rotate(0,angle,0); // //-------------------------------------------------------------------- next_position = current_ground_position + gameObject.transform.up * 0.5f + motion ; return next_position; } } Some observation: I have the correct input, I have the correct translation in the camera direction ... but whenever I attempt to slowly lerp the direction of the character in direction of the input, all I get is wild spin! Sad Also discovered that strafing to the right (immediately at the beginning without moving forward) has major singularity trapping on the equator!! I'm totally lost and crush (I have already done a much more featured version which fail at the same aspect)

    Read the article

  • Styling ASP.NET MVC Error Messages

    - by MightyZot
    Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/11/styling-asp.net-mvc-error-messages.aspxOff the cuff, it may look like you’re stuck with the presentation of your error messages (model errors) in ASP.NET MVC. That’s not the case, though. You actually have quite a number of options with regard to styling those boogers. Like many of the helpers in MVC, the Html.ValidationMessageFor helper has multiple prototypes. One of those prototypes lets you pass a dictionary, or anonymous object, representing attribute values for the resulting markup. @Html.ValidationMessageFor( m => Model.Whatever, null, new { @class = “my-error” }) By passing the htmlAttributes parameter, which is the last parameter in the call to the prototype of Html.ValidationMessageFor shown above, I can style the resulting markup by associating styles to the my-error css class.  When you run your MVC project and view the source, you’ll notice that MVC adds the class field-validation-valid or field-validation-error to a span created by the helper. You could actually just style those classes instead of adding your own…it’s really up to you. Now, what if you wanted to move that error message around? Maybe you want to put that error message in a box or a callout. How do you do that? When I first started using MVC, it didn’t occur to me that the Html.ValidationMessageFor helper just spits out a little bit of markup. I wanted to put the error messages in boxes with white backgrounds, our site originally had a black background, and show a little nib on the side to make them look like callouts or conversation bubbles. Not realizing how much freedom there is in the styling and markup, and after reading someone else’s post, I created my own version of the ValidationMessageFor helper that took out the span and replaced it with divs. I styled the divs to produce the effect of a popup box and had a lot of trouble with sizing and such. That’s a really silly and unnecessary way to solve this problem. If you want to move your error messages around, all you have to do is move the helper. MVC doesn’t appear to care where you put it, which makes total sense when you think about it. Html.ValidationMessageFor is just spitting out a little markup using a little bit of reflection on the name you’re passing it. All you’ve got to do to style it the way you want it is to put it in whatever markup you desire. Take a look at this, for example… <div class=”my-anchor”>@Html.ValidationMessageFor( m => Model.Whatever )</div> @Html.TextBoxFor(m => Model.Whatever) Now, given that bit of HTML, consider the following CSS… <style> .my-anchor { position:relative; } .field-validation-error {    background-color:white;    border-radius:4px;    border: solid 1px #333;    display: block;    position: absolute;    top:0; right:0; left:0;    text-align:right; } </style> The my-anchor class establishes an anchor for the absolutely positioned error message. Now you can move the error message wherever you want it relative to the anchor. Using css3, there are some other tricks. For example, you can use the :not(:empty) selector to select the span and apply styles based upon whether or not the span has text in it. Keep it simple, though. Moving your elements around using absolute positioning may cause you issues on devices with screens smaller than your standard laptop or PC. While looking for something else recently, I saw someone asking how to style the output for Html.ValidationSummary.  Html.ValidationSummery is the helper that will spit out a list of property errors, general model errors, or both. Html.ValidationSummary spits out fairly simple markup as well, so you can use the techniques described above with it also. The resulting markup is a <ul><li></li></ul> unordered list of error messages that carries the class validation-summary-errors In the forum question, the user was asking how to hide the error summary when there are no errors. Their errors were in a red box and they didn’t want to show an empty red box when there aren’t any errors. Obviously, you can use the css3 selectors to apply different styles to the list when it’s empty and when it’s not empty; however, that’s not support in all browsers. Well, it just so happens that the unordered list carries the style validation-summary-valid when the list is empty. While the div rendered by the Html.ValidationSummary helper renders a visible div, containing one invisible listitem, you can always just style the whole div with “display:none” when the validation-summary-valid class is applied and make it visible when the validation-summary-errors class is applied. Or, if you don’t like that solution, which I like quite well, you can also check the model state for errors with something like this… int errors = ViewData.ModelState.Sum(ms => ms.Value.Errors.Count); That’ll give you a count of the errors that have been added to ModelState. You can check that and conditionally include markup in your page if you want to. The choice is yours. Obviously, doing most everything you can with styles increases the flexibility of the presentation of your solution, so I recommend going that route when you can. That picture of the fat guy jumping has nothing to do with the article. That’s just a picture of me on the roof and I thought it was funny. Doesn’t every post need a picture?

    Read the article

  • UITableView having one Cell with multiple UITextFields (some of them in one row) scrolling crazy

    - by Allisone
    I have a UITableView (grouped). In that tableview I have several UITableViewCells, some custom with nib, some default. One Cell (custom) with nib has several UITextfields for address information, thus also one row has zip-code and city in one row. When I get the keyboard the tableview size seems to be adjusted automatically (vs. another viewController in the app with just a scrollview where I had to code this functionality on my own) so that i can scroll to the bottom of my tableview (and see it) even though the keyboard is up. That's good. BUT when I click on a textfield the tableview gets either scrolled up, or down, I can't figure out the logic. It seems to be rather random up/down scrolling / contentOffset setting. So I have bound the Editing Did Begin events of the textfields to a function that has this code. - (IBAction)textFieldDidBeginEditing:(UITextField *)textField { CGPoint pt; CGRect rc = [textField bounds]; rc = [textField convertRect:rc toView:self.tableView]; pt = rc.origin; pt.x = 0; [self.tableView setContentOffset:pt animated:YES]; ... } This, well, it seems to work most of the time, BUT it doesn't work if I click the first textfield (the view jumps so that the second row gets to the top and the first row is out of the current visible view frame) AND it also doesn't work if I first select the zip textfield and next the city textfield (both in one row) or vice versa. If I do so, the tableview seems to jump to the (grouped tableview) top of my viewForHeaderInSection(this section with this mentioned cell with all my textfields) What is is going on ? Why is this happening ? How to fix this ? Edit This on the other hand behaves as expected (for the two Textviews wit same origin.y) if (self.tableView.contentOffset.y == pt.y) { pt.y = pt.y + 1; [self.tableView setContentOffset:pt animated:YES]; }else { [self.tableView setContentOffset:pt animated:YES]; } But this is a stupid solution. I wouldn't like to keep it that way. And this also doesn't fix the wrong jumping, when clicking the first textfield at first.

    Read the article

  • NSXMLParser Memory Allocation Efficiency for the iPhone

    - by Staros
    Hello, I've recently been playing with code for an iPhone app to parse XML. Sticking to Cocoa, I decided to go with the NSXMLParser class. The app will be responsible for parsing 10,000+ "computers", all which contain 6 other strings of information. For my test, I've verified that the XML is around 900k-1MB in size. My data model is to keep each computer in an NSDictionary hashed by a unique identifier. Each computer is also represented by a NSDictionary with the information. So at the end of the day, I end up with a NSDictionary containing 10k other NSDictionaries. The problem I'm running into isn't about leaking memory or efficient data structure storage. When my parser is done, the total amount of allocated objects only does go up by about 1MB. The problem is that while the NSXMLParser is running, my object allocation is jumping up as much as 13MB. I could understand 2 (one for the object I'm creating and one for the raw NSData) plus a little room to work, but 13 seems a bit high. I can't imaging that NSXMLParser is that inefficient. Thoughts? Code... The code to start parsing... NSXMLParser *parser = [[NSXMLParser alloc] initWithData: data]; [parser setDelegate:dictParser]; [parser parse]; output = [[dictParser returnDictionary] retain]; [parser release]; [dictParser release]; And the parser's delegate code... -(void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qualifiedName attributes:(NSDictionary *)attributeDict { if(mutableString) { [mutableString release]; mutableString = nil; } mutableString = [[NSMutableString alloc] init]; } -(void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { if(self.mutableString) { [self.mutableString appendString:string]; } } -(void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName { if([elementName isEqualToString:@"size"]){ //The initial key, tells me how many computers returnDictionary = [[NSMutableDictionary alloc] initWithCapacity:[mutableString intValue]]; } if([elementName isEqualToString:hashBy]){ //The unique identifier if(mutableDictionary){ [mutableDictionary release]; mutableDictionary = nil; } mutableDictionary = [[NSMutableDictionary alloc] initWithCapacity:6]; [returnDictionary setObject:[NSDictionary dictionaryWithDictionary:mutableDictionary] forKey:[NSMutableString stringWithString:mutableString]]; } if([fields containsObject:elementName]){ //Any of the elements from a single computer that I am looking for [mutableDictionary setObject:mutableString forKey:elementName]; } } Everything initialized and released correctly. Again, I'm not getting errors or leaking. Just inefficient. Thanks for any thoughts!

    Read the article

  • Approaches to create a nested tree structure of NSDictionaries?

    - by d11wtq
    I'm parsing some input which produces a tree structure containing NSDictionary instances on the branches and NSString instance at the nodes. After parsing, the whole structure should be immutable. I feel like I'm jumping through hoops to create the structure and then make sure it's immutable when it's returned from my method. We can probably all relate to the input I'm parsing, since it's a query string from a URL. In a string like this: a=foo&b=bar&a=zip We expect a structure like this: NSDictionary { "a" => NSDictionary { 0 => "foo", 1 => "zip" }, "b" => "bar" } I'm keeping it just two-dimensional in this example for brevity, though in the real-world we sometimes see var[key1][key2]=value&var[key1][key3]=value2 type structures. The code hasn't evolved that far just yet. Currently I do this: - (NSDictionary *)parseQuery:(NSString *)queryString { NSMutableDictionary *params = [NSMutableDictionary dictionary]; NSArray *pairs = [queryString componentsSeparatedByString:@"&"]; for (NSString *pair in pairs) { NSRange eqRange = [pair rangeOfString:@"="]; NSString *key; id value; // If the parameter is a key without a specified value if (eqRange.location == NSNotFound) { key = [pair stringByReplacingPercentEscapesUsingEncoding:NSASCIIStringEncoding]; value = @""; } else { // Else determine both key and value key = [[pair substringToIndex:eqRange.location] stringByReplacingPercentEscapesUsingEncoding:NSASCIIStringEncoding]; if ([pair length] > eqRange.location + 1) { value = [[pair substringFromIndex:eqRange.location + 1] stringByReplacingPercentEscapesUsingEncoding:NSASCIIStringEncoding]; } else { value = @""; } } // Parameter already exists, it must be a dictionary if (nil != [params objectForKey:key]) { id existingValue = [params objectForKey:key]; if (![existingValue isKindOfClass:[NSDictionary class]]) { value = [NSDictionary dictionaryWithObjectsAndKeys:existingValue, [NSNumber numberWithInt:0], value, [NSNumber numberWithInt:1], nil]; } else { // FIXME: There must be a more elegant way to build a nested dictionary where the end result is immutable? NSMutableDictionary *newValue = [NSMutableDictionary dictionaryWithDictionary:existingValue]; [newValue setObject:value forKey:[NSNumber numberWithInt:[newValue count]]]; value = [NSDictionary dictionaryWithDictionary:newValue]; } } [params setObject:value forKey:key]; } return [NSDictionary dictionaryWithDictionary:params]; } If you look at the bit where I've added FIXME it feels awfully clumsy, pulling out the existing dictionary, creating an immutable version of it, adding the new value, then creating an immutable dictionary from that to set back in place. Expensive and unnecessary? I'm not sure if there are any Cocoa-specific design patterns I can follow here?

    Read the article

  • Why does one loop take longer to detect a shared memory update than another loop?

    - by Joseph Garvin
    I've written a 'server' program that writes to shared memory, and a client program that reads from the memory. The server has different 'channels' that it can be writing to, which are just different linked lists that it's appending items too. The client is interested in some of the linked lists, and wants to read every node that's added to those lists as it comes in, with the minimum latency possible. I have 2 approaches for the client: For each linked list, the client keeps a 'bookmark' pointer to keep its place within the linked list. It round robins the linked lists, iterating through all of them over and over (it loops forever), moving each bookmark one node forward each time if it can. Whether it can is determined by the value of a 'next' member of the node. If it's non-null, then jumping to the next node is safe (the server switches it from null to non-null atomically). This approach works OK, but if there are a lot of lists to iterate over, and only a few of them are receiving updates, the latency gets bad. The server gives each list a unique ID. Each time the server appends an item to a list, it also appends the ID number of the list to a master 'update list'. The client only keeps one bookmark, a bookmark into the update list. It endlessly checks if the bookmark's next pointer is non-null ( while(node->next_ == NULL) {} ), if so moves ahead, reads the ID given, and then processes the new node on the linked list that has that ID. This, in theory, should handle large numbers of lists much better, because the client doesn't have to iterate over all of them each time. When I benchmarked the latency of both approaches (using gettimeofday), to my surprise #2 was terrible. The first approach, for a small number of linked lists, would often be under 20us of latency. The second approach would have small spats of low latencies but often be between 4,000-7,000us! Through inserting gettimeofday's here and there, I've determined that all of the added latency in approach #2 is spent in the loop repeatedly checking if the next pointer is non-null. This is puzzling to me; it's as if the change in one process is taking longer to 'publish' to the second process with the second approach. I assume there's some sort of cache interaction going on I don't understand. What's going on?

    Read the article

  • MBR Booting from DOS

    - by eflukx
    For a project I would like to invoke the MBR on the first harddisk directly from DOS. I've written a small assembler program that loads the MBR in memory at 0:7c00h an does a far jump to it. I've put my util on a bootable floppy. The disk (HD0, 0x80) i'm trying to boot has a TrueCrypt boot loader on it. It shows up the TrueCrypt screen, but after typing in the password it crashes the system. When I run my little utlility (w00t.com) on a normal WinXP machine it seams to crash immedealty. Apparently I'm forgetting some crucial stuff the BIOS normally does, my guess is it's something trivial. Can someone with better bare-metal DOS and BIOS experience help me out? Heres my code: .MODEL tiny .386 _TEXT SEGMENT USE16 INCLUDE BootDefs.i ORG 100h start: ; http://vxheavens.com/lib/vbw05.html ; Before DOS has booted the BIOS stores the amount of usable lower memory ; in a word located at 0:413h in memory. We going to erase this value because ; we have booted dos before loading the bootsector, and dos is fat (and ugly). ; fake free memory ;push ds ;push 0 ;pop ds ;mov ax, TC_BOOT_LOADER_SEGMENT / 1024 * 16 + TC_BOOT_MEMORY_REQUIRED ;mov word ptr ds:[413h], ax ;ax = memory in K ;pop ds ;lea si, memory_patched_msg ;call print ;mov ax, cs mov ax, 0 mov es, ax ; read first sector to es:7c00h (== cs:7c00) mov dl, 80h mov cl, 1 mov al, 1 mov bx, 7c00h ;load sector to es:bx call read_sectors lea si, mbr_loaded_msg call print lea si, jmp_to_mbr_msg call print ;Set BIOS default values in environment cli mov dl, 80h ;(drive C) xor ax, ax mov ds, ax mov es, ax mov ss, ax mov sp, 0ffffh sti push es push 7c00h retf ;Jump to MBR code at 0:7c00h ; Print string print: xor bx, bx mov ah, 0eh cld @@: lodsb test al, al jz print_end int 10h jmp @B print_end: ret ; Read sectors of the first cylinder read_sectors: mov ch, 0 ; Cylinder mov dh, 0 ; Head ; DL = drive number passed from BIOS mov ah, 2 int 13h jnc read_ok lea si, disk_error_msg call print read_ok: ret memory_patched_msg db 'Memory patched', 13, 10, 7, 0 mbr_loaded_msg db 'MBR loaded', 13, 10, 7, 0 jmp_to_mbr_msg db 'Jumping to MBR code', 13, 10, 7, 0 disk_error_msg db 'Disk error', 13, 10, 7, 0 _TEXT ENDS END start

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19  | Next Page >