Search Results

Search found 937 results on 38 pages for 'lo sauer'.

Page 16/38 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• SSH stops at "using username" with IPTables in effect

  - by Rautamiekka

  We used UFW but couldn't make the Source Dedicated ports open, which was weird, so we purged UFW and switched to IPTables, using Webmin to configure. If the inbound chain is on DENY and SSH port open [judged from Webmin], PuTTY will say using username "root" and stops at that instead of asking for public key pw. Inbound chain on ACCEPT the pw is asked. This problem didn't happen with UFW. Picture of IPTables configuration in Webmin: http://s284544448.onlinehome.us/public/PlusLINE%20Dedicated%20Server,%20Webmin,%20IPTables,%200.jpgThe address is to the previous rautamiekka.org. iptables-save when on INPUT DENY: # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *mangle :PREROUTING ACCEPT [1430:156843] :INPUT ACCEPT [1430:156843] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1415:781598] :POSTROUTING ACCEPT [1415:781598] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *nat :PREROUTING ACCEPT [2:104] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] COMMIT # Completed on Wed Apr 11 16:09:20 2012 # Generated by iptables-save v1.4.8 on Wed Apr 11 16:09:20 2012 *filter :INPUT DROP [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [1247:708906] -A INPUT -i lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT -A INPUT -p tcp -m comment --comment "Services - TCP" -m tcp -m multiport --dports 22,80,443,10000,20,21 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m comment --comment "Minecraft - TCP" -m tcp --dport 25565 -j ACCEPT -A INPUT -p udp -m comment --comment "Minecraft - UDP" -m udp --dport 25565 -j ACCEPT -A INPUT -p tcp -m comment --comment "Source Dedicated - TCP" -m tcp --dport 27015 -j ACCEPT -A INPUT -p udp -m comment --comment "Source Dedicated - UDP" -m udp -m multiport --dports 4380,27000:27030 -j ACCEPT -A INPUT -p udp -m comment --comment "TS3 - UDP - main port" -m udp --dport 9987 -j ACCEPT -A INPUT -p tcp -m comment --comment "TS3 - TCP - ServerQuery" -m tcp --dport 10011 -j ACCEPT -A OUTPUT -o lo -m comment --comment "Machine-within traffic - always allowed" -j ACCEPT COMMIT # Completed on Wed Apr 11 16:09:20 2012 iptables --list when on INPUT DENY: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ ACCEPT tcp -- anywhere anywhere /* Services - TCP */ tcp multiport dports ssh,www,https,webmin,ftp-data,ftp state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere /* Minecraft - TCP */ tcp dpt:25565 ACCEPT udp -- anywhere anywhere /* Minecraft - UDP */ udp dpt:25565 ACCEPT tcp -- anywhere anywhere /* Source Dedicated - TCP */ tcp dpt:27015 ACCEPT udp -- anywhere anywhere /* Source Dedicated - UDP */ udp multiport dports 4380,27000:27030 ACCEPT udp -- anywhere anywhere /* TS3 - UDP - main port */ udp dpt:9987 ACCEPT tcp -- anywhere anywhere /* TS3 - TCP - ServerQuery */ tcp dpt:10011 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere /* Machine-within traffic - always allowed */ The UFW rules prior to purging on INPUT DENY: 127.0.0.1 ALLOW IN 127.0.0.1 3306 DENY IN Anywhere 20,21/tcp ALLOW IN Anywhere 22/tcp (OpenSSH) ALLOW IN Anywhere 80/tcp ALLOW IN Anywhere 443/tcp ALLOW IN Anywhere 989 ALLOW IN Anywhere 990 ALLOW IN Anywhere 8075/tcp ALLOW IN Anywhere 9987/udp ALLOW IN Anywhere 10000/tcp ALLOW IN Anywhere 10011/tcp ALLOW IN Anywhere 25565/tcp ALLOW IN Anywhere 27000:27030/tcp ALLOW IN Anywhere 4380/udp ALLOW IN Anywhere 27014:27050/tcp ALLOW IN Anywhere 30033/tcp ALLOW IN Anywhere

  Read the article

• VPC SSH port forward into private subnet

  - by CP510

  Ok, so I've been racking my brain for DAYS on this dilema. I have a VPC setup with a public subnet, and a private subnet. The NAT is in place of course. I can connect from SSH into a instance in the public subnet, as well as the NAT. I can even ssh connect to the private instance from the public instance. I changed the SSHD configuration on the private instance to accept both port 22 and an arbitrary port number 1300. That works fine. But I need to set it up so that I can connect to the private instance directly using the 1300 port number, ie. ssh -i keyfile.pem [email protected] -p 1300 and 1.2.3.4 should route it to the internal server 10.10.10.10. Now I heard iptables is the job for this, so I went ahead and researched and played around with some routing with that. These are the rules I have setup on the public instance (not the NAT). I didn't want to use the NAT for this since AWS apperantly pre-configures the NAT instances when you set them up and I heard using iptables can mess that up. *filter :INPUT ACCEPT [129:12186] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [84:10472] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m state --state NEW -m tcp --dport 1300 -j ACCEPT -A INPUT -d 10.10.10.10/32 -p tcp -m limit --limit 5/min -j LOG --log-prefix "SSH Dropped: " -A FORWARD -d 10.10.10.10/32 -p tcp -m tcp --dport 1300 -j ACCEPT -A OUTPUT -o lo -j ACCEPT COMMIT # Completed on Wed Apr 17 04:19:29 2013 # Generated by iptables-save v1.4.12 on Wed Apr 17 04:19:29 2013 *nat :PREROUTING ACCEPT [2:104] :INPUT ACCEPT [2:104] :OUTPUT ACCEPT [6:681] :POSTROUTING ACCEPT [7:745] -A PREROUTING -i eth0 -p tcp -m tcp --dport 1300 -j DNAT --to-destination 10.10.10.10:1300 -A POSTROUTING -p tcp -m tcp --dport 1300 -j MASQUERADE COMMIT So when I try this from home. It just times out. No connection refused messages or anything. And I can't seem to find any log messages about dropped packets. My security groups and ACL settings allow communications on these ports in both directions in both subnets and on the NAT. I'm at a loss. What am I doing wrong?

  Read the article

• Can only bring up one of two interfaces

  - by mstaessen

  I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

  Read the article

• Remote access to internal machine (ssh port-forwarding)

  - by MacUsers

  I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

  Read the article

• iptables: Allow only HTTP access for web browsing

  - by user1448260

  Have a linux box, want it locked down but just be able to surf internet on it. Why is this script blocking http too? #!/bin/sh # # iptables -F # #Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # # Allow TCP connections on tcp port 80 # iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # List rules # iptables -L -v

  Read the article

• arp "who-has tell" on cloned machine

  - by mcmorry

  I have a urgent problem to solve today, but I'm lost. Please help. I've cloned a Virtual Machine hosted on VM Ware ESXi 4.1 The OS is now Ubuntu Server 12.04 LTS, but at the time of cloning it was 10.04 LTS. I fixed the MAC address manually inside /etc/udev/rules.d/70-persistent-net.rules. It is a known problem on Ubuntu. I had to remove the old MAC address and set the new one as eth0. Everything seems to work fine, except ARP. My provider OVH sent me a warning to resolve it today (this is the second day) or they will block my IP! The log contains many lines like this: Tue Jun 5 01:04:29 2012 : arp who-has 178.32.136.212 tell 178.32.136.224 where .224 is the cloned server that is causing problems, and .212 is the cloned one. arp -na returns: ? (178.33.230.254) at 00:07:b4:00:00:02 [ether] on eth0 ? (178.32.136.212) at 00:50:56:09:8e:f1 [ether] on eth0 The first IP is the ESXi machine. The second one should not be there. I'm not an expert and I don't know what else to do to fix this problem. Any help will be very appreciated. Thanks. EDIT: ifcofig on .224: eth0 Link encap:Ethernet HWaddr 00:50:56:01:32:c6 inet addr:178.32.136.224 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe01:32c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:399924 errors:0 dropped:465 overruns:0 frame:0 TX packets:241884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58006071 (58.0 MB) TX bytes:663603166 (663.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:516216 errors:0 dropped:0 overruns:0 frame:0 TX packets:516216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:236284275 (236.2 MB) TX bytes:236284275 (236.2 MB) ifconfig on .212: eth0 Link encap:Ethernet HWaddr 00:50:56:09:8e:f1 inet addr:178.32.136.212 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe09:8ef1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16014 errors:0 dropped:0 overruns:0 frame:0 TX packets:14511 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15134444 (15.1 MB) TX bytes:2683025 (2.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9944 errors:0 dropped:0 overruns:0 frame:0 TX packets:9944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1139347 (1.1 MB) TX bytes:1139347 (1.1 MB)

  Read the article

• Delete files from directory: memory exhausted

  - by codeholic

  This question is a logical continuation of http://serverfault.com/questions/45245/how-can-i-delete-all-files-from-a-directory-when-it-reports-argument-list-too-lo I have drwxr-xr-x 2 doreshkin doreshkin 198291456 Apr 6 21:35 session_data I tried find session_data -type f -delete find session_data -type f | xargs rm -f find session_data -maxdepth 1 -type f -print0 | xargs -r0 rm -f The result is the same: find: memory exhausted What can I do to remove this directory?

  Read the article

• Do I need a hardware firewall for Win 2003?

  - by user531723

  We have had a Win 2003 server at a co-lo for a while. It is used as a web server and has a very cheap hardware firewall between it and the internet. Ports 3389 and 80 are the only ones forwarded to the server. I am doing some upgrading and wondering if I really need the firewall. Are there any drawbacks to just using the Win 2003 built in firewall to make sure only traffic on 3389 and 80 get through?

  Read the article

• Can't ping Ip over bridge

  - by tmn29a

  I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

  Read the article

• Video Aulas gratuitas de ASP.NET AJAX

  - by renatohaddad

  Olá pessoal, A Microsoft publicou 14 vídeos que cedi a eles a respeito do ASP.NET AJAX. Todos os vídeos são gratuitos, e caso você ainda use o AJAX estas lições podem ajudá-lo bastante. Tenha um excelente estudo. Instalação do AJAX Control Tookit ASP.NET AJAX: Controle calendário ASP.NET AJAX: Controle marca d´água ASP.NET AJAX: Controle Numeric Up Down ASP.NET AJAX: Controle botão de confirmação ASP.NET AJAX: Filtros de digitação ASP.NET AJAX: Validação de dados ASP.NET AJAX: Controle Accordion ASP.NET AJAX: Controle Accordion com banco de dados ASP.NET AJAX: Controle de painel ASP.NET AJAX: Controle TAB ASP.NET AJAX: Sempre visível ASP.NET AJAX: Controle Update Panel ASP.NET AJAX: Controle Update Progress Bons estudos! Renato Haddad

  Read the article

• Error Ubuntu 11.10 despues de instalar [Error after installing Ubuntu 11.10]

  - by manue

  instale ubuntu 11.10, termino de instalar y no tiene nada, ni aplicaciones, ni esa barrita lateral de unity, no tiene nada, ni si quiera la barra donde aparece la hora; porque? y me aparece un cuadro diciendo que hay un error en el disco y que el fallo es inminente , que es? SMART no entiendo, ayuda Y en otro disco duro con windows xp sp3 se bloquea cuando lo instalo desde el live cd, y desde wubi aparece esto enter link description here que hacer? English translation (via Google Translate, edited) I have installed ubuntu 11.10, after finishing the installing there is nothing, no applications, no the sidebar called unity, there is nothing, not even the bar where time appears, why?. I get a box saying there is an error on the disk and that failure is imminent. What is SMART, I do not understand, help In my other hard drive, with windows xp sp3, it crashes when I try install from the live cd using wubi, this appears, what to do?

  Read the article

• IIS 7 (Windows Server 2008) no entrega javascript ni css

  - by José Marcos García Espinosa

  Hace algunos días, jugando con las configuraciones del IIS, revolvíamos las opciones de compresión de contenidos. La intención era habilitar gzip para el contenido estático pero la cosa salió tan mal que el portal, en vez de reducir su tamaño por los contenidos comprimidos, lo "redujo" porque el servidor dejó de enviar los archivos javascript y las hojas de estilo al navegador. Después de estar buscando como hora y media, resultó que la explicación y la solución eran bastante sencillas (y ni siquiera las encontramos nosotros): Al estar cambiando las opciones de compresión de contenidos estáticos del IIS, se crearon unos archivos de configuración (web.config's) tanto en la carpeta de los archivos javascript como en la de las hojas de estilo, que es una estructura que el propio IIS no reconocía y dejaba la aplicación 'cortada', dejando fuera estas carpetas. Eliminar ambos archivos de configuración bastó para volver a visualizar el portal como se debía.. de la compresión, creo que ya ni seguimos buscando.

  Read the article

• Ubuntu 12.04.1 completely freezing very often [closed]

  - by tyler

  Possible Duplicate: What should I do when Ubuntu freezes? I am running ubuntu 12.04.1 on an asus zenbook prime (UX31A), and I am having a problem where the entire OS freezes at random times. It doesn't seem to happen in response to any certain event, it will even sometimes happen while just moving the mouse, not even clicking on anything. The entire system will freeze, mouse and keyboard do not work, and any music/video will freeze and audio will loop. I can do nothing but hold the power button to reboot the computer. I've had this problem for a while, and just yesterday gotten around to backing up everything and doing a fresh install. Lo and behold, I get a freeze within 20 minutes of a fresh install. I've googled this a lot, and cannot find anything that resembles it exactly (some people have everything but mouse/keyboard freeze, some people only have the mouse/keyboard freeze).

  Read the article

• Error al instalar Visual Studio 2008 en Windows 7

  - by José Marcos García Espinosa

  Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147023293. - Es el mensaje que aparece en la descripción del error o en los archivos de log. Algunos dicen que si buscas más a detalle encuentras el problema. Después de reintentar la instalación como 8 veces, desinstalando cada vez más cosas, te encuentras con que la solución es sencilla: ¡Desinstala Office! No sé por qué, pero creo que Microsoft asume que si eres un desarrollador, primero instalarás VS2008 y después Office; si lo haces al revés, se generan problemas de compatibilidad (ya que VS2008 instala herramientas de interoperabilidad/desarrollo/conexión con Office, Visual Studio Tools for Office) y la instalación no pasa a veces ni del .net Framework. A final de cuentas, creo, ésta es una medio sencilla.

  Read the article

• Material del Webcast MSDN: Introducción a páginas Web ASP.NET con Razor Syntax

  - by carlone

  Ayer tuve la oportunidad de compartir con ustedes en el webcast de MSDN una breve introducción a Razor. En este webcast que próximamente estará disponible para que lo puedan descargar o ver a quienes no pudieron acompañarnos, vimos una serie de ejemplos y aplicaciones de Razor.   A continuación les comparto la presentación y el sitio de demostración utilizado en el webcast: Presentación:     Sitio de Demostración:   Durante la demostración utilice WebMatrix, el cual pueden descargar aqui: http://www.microsoft.com/web/webmatrix/    Cualquier duda estoy a sus ordenes,   Saludos Cordiales,   Carlos A. Lone

  Read the article

• FY12 Oracle PartnerNetwork Kickoff - junte-se a nós

  - by pfolgado

  Caro parceiro, Como temos vindo a anunciar, vai ter lugar no próximo dia 28/Jun (3ª feira), via web, o FY12 Oracle PartnerNetwork Kickoff. Dada a importância deste evento, durante o qual serão apresentadas em primeira mão as novidades quanto à oferta de produtos Oracle e quanto ao papel e oportunidades para os parceiros, queremos convidá-lo a juntar-se a nós para assistirmos em conjunto a esse evento, a partir do nosso Showroom, na companhia de outros parceiros e dos nossos VAD - Altimate e Diasa. Se aceitar o nosso convite, estaremos à sua espera às 13:45. Por questões logísticas, por favor envie-nos um email indicando quantas e quais as pessoas que irão estar presentes nesta sessão. Em qualquer dos casos, não deixe de se registar no link indicado na notícia anterior (register).

  Read the article

• wifi usb dongle detected but no wlan interface

  - by piotrek

  I'm using ubuntu 12.04. When I insert my philips PTA01 usb wifi dongle, in dmesg i can see: [ 1181.535290] usb 2-3: new high-speed USB device number 4 using ehci_hcd [ 1181.684074] usb 2-3: New USB device found, idVendor=0471, idProduct=209e [ 1181.684086] usb 2-3: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 1181.684093] usb 2-3: Product: PTA-01 [ 1181.684100] usb 2-3: Manufacturer: PHILIPS TV [ 1181.684105] usb 2-3: SerialNumber: 10 dmesg | grep ath: [ 367.861626] usbcore: registered new interface driver ath9k_htc but still there is no wlan interface when I do ifconfig. Just eth0 and lo. How can I turn wifi on? in case it's relevant. uname -a: Linux myhost 3.5.0-28-generic #48~precise1-Ubuntu SMP Wed Apr 24 21:42:24 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Macbook Pro 8,1 - wireless interface not showing up

  - by Florian Margaine

  I've installed Ubuntu 11.10 on my Macbook Pro 8,1. Everything went fine and everything installs fine except for the wireless interface. I've installed the b43 module according to these instructions: https://help.ubuntu.com/community/MacBookPro8-1/Natty#Wireless I've tried compiling the module, ndiswrapper and also the last solution mentioned using this PPA: ppa:zwaldowski/ppa. With the three solutions, the module loads finely. It works smoothly. lspci shows the wireless card without problem. But there is no wireless interface. iwconfig or ifconfig both show eth0 and lo as interfaces, but no eth1 or wlan0 interface is showing up. I have no idea why, and I'm completely stuck there.

  Read the article

• Oracle allo SMAU 2012 - La strategia CRM e l’approccio alla Customer Experience: perchè le aziende devono servire diversamente i propri clienti.

  - by Silvia Valgoi

  Lo scorso 18 Ottobre Oracle è stata presente all'edizione milanese di SMAU 2012 all'interno della Apps & Cloud Arena. Invitata da AISM (Associazione italiana marketing) Oracle  ha avuto l’opportunità di partecipare attivamente con un intervento all’interno dell’area tematica “Gestire efficacemente i propri clienti attraverso le applicazioni di Customer Relationship Management”. Le molte persone presenti hanno potuto ascoltare dove, secondo Oracle, si genera reale differenziazione del brand – al di là dei processi ormai consolidati di marketing , vendita e servizio al cliente – e dove si posiziona il nuovo valore per il business. Se non hai potuto partecipare guarda qui la presentazione di Oracle. Per maggiori informazioni: Silvia Valgoi

  Read the article

• What word processor can manage left and right pages separately?

  - by chtfn

  I was after a word processor that can manage left and right pages separately so I can have my text on the right pages and my illustrations on the left pages. I know LibeOffice can set "left page" and "right page" formats, but there is no simple way to make the text jump from right page to right page when writing. I don't know what would be the best way to do that, but I guess I need an app that is designed for writing books and do that kind of thing, or an app that can associate a page format with an object format (so the "illustration" format can be exclusively associated with "left page" format, and "text body" exclusively associated with "right page", for example). Or is there an extension for LO or OOo out there that I didn't hear about? Cheers!

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• notifyOSD in gnome is not like in Unity

  - by Rodrigo

  tengo dos sistema operativos ubuntu 12.04, con escritorio gnome. En uno, las notificaciones emergentes son como en unity, pero en el otro SO son diferentes, grises, sin transparencia, y también hay que cerrarlas, por lo que quiero que quede la que viene por defecto en Unity en éste gnome también. Si alguie sabe algo sobre estas notificaciones emergentes feas, que por favor, me ayude. Gracias!! Google Traslate: I have two operating system Ubuntu 12.04 with gnome desktop. In one, the pop-up notifications are as in unity, but in the other OS are different, gray, not transparent, and you also have to close them, so I want to make the default one in gnome Unity in this too. If alguie know something about these ugly pop-up notifications, please, help me. Thanks!

  Read the article

• Customer Insight. Trend, Modelli e Tecnologie di Successo nel CRM di ultima generazione

  - by antonella.buonagurio(at)oracle.com

  Lo scorso 27 gennaio a Roma si è tenuta la 3° tappa del CRM On Demand Roadshow. L'iniziativa è stata un un momento di incontro e confronto tra Direttori Marketing, esperti di CRM e Direttori Sales, sui nuovi trend del marketing relazionale.   Grazie altri interventi di ItalTBS, Bricofer, Renault Italia, Avis,  IRCCS, San Raffale e con la moderazione del Prof. Maurizio Mesenzani  si sono condivise idee, esperienze, riflessioni sugli strumenti che ad oggi si sono dimostrati essere i  più efficaci per individuare i bisogni del cliente, trasformare i clienti potenziali in clienti soddisfatti, creare engagement. Continua a leggere per vedere le presentazioni

  Read the article

• Oracle 12cR1 : Evaluación "What-If" de un comando crsctl con Oracle Clusterware

  - by grantunez-Oracle

  Oracle en su nueva version 12cR1 introdujo una nueva y pequeña característica  al Oracle Clusterware, pero el que sea pequeña, no significa que no sea de gran utilidad. En versiones anteriores, si queríamos saber que iba a pasar al ejecutar un comando con la herramienta crsctl, teníamos que hacerlo en un ambiente de pruebas, ya que si no sabíamos de que se trataba el comando, se convertía en algo muy peligroso hacerlo sobre producción. En Oracle Clusterware 12cR1 se introduce la evaluación de comando tipo "What-If" en la herramienta mencionada anteriormente, crsctl eval, que lo que nos permite es ver , que va a suceder si ejecuta el comando, sin que realmente se ejecute el comando. Primero vamos a ver que recursos tenemos arriba  [oracle@oel6-112-rac1 ~]$ crsctl stat res -t--------------------------------------------------------------------------------Name           Target  State        Server                   State details       --------------------------------------------------------------------------------Local Resources--------------------------------------------------------------------------------ora.ASMNET1LSNR_ASM.lsnr               ONLINE  ONLINE       oel6-112-rac1            STABLE               ONLINE  ONLINE       oel6-112-rac2            STABLEora.DATA.dg               ONLINE  ONLINE       oel6-112-rac1            STABLE               ONLINE  ONLINE       oel6-112-rac2            STABLEora.LISTENER.lsnr               ONLINE  ONLINE       oel6-112-rac1            STABLE               ONLINE  ONLINE       oel6-112-rac2            STABLEora.net1.network               ONLINE  ONLINE       oel6-112-rac1            STABLE               ONLINE  ONLINE       oel6-112-rac2            STABLEora.ons               ONLINE  ONLINE       oel6-112-rac1            STABLE               ONLINE  ONLINE       oel6-112-rac2            STABLEora.proxy_advm               ONLINE  ONLINE       oel6-112-rac1            STABLE               ONLINE  OFFLINE      oel6-112-rac2            CLEANINGora.LISTENER_SCAN1.lsnr      1        ONLINE  ONLINE       oel6-112-rac2            STABLEora.LISTENER_SCAN2.lsnr      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.LISTENER_SCAN3.lsnr      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.MGMTLSNR      1        ONLINE  ONLINE       oel6-112-rac1            169.254.247.50 192.1                                                             68.1.111,STABLEora.asm      1        ONLINE  ONLINE       oel6-112-rac1            STABLE      2        ONLINE  ONLINE       oel6-112-rac2            STABLE      3        OFFLINE OFFLINE                               STABLEora.cvu      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.gns      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.gns.vip      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.mgmtdb      1        ONLINE  ONLINE       oel6-112-rac1            Open,STABLEora.oc4j      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.oel6-112-rac1.vip      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.oel6-112-rac2.vip      1        ONLINE  ONLINE       oel6-112-rac2            STABLEora.orcl.db      1        OFFLINE OFFLINE      oel6-112-rac2            Instance Shutdown,STABLE       2        ONLINE  ONLINE       oel6-112-rac1            Open,STABLEora.scan1.vip      1        ONLINE  ONLINE       oel6-112-rac2            STABLEora.scan2.vip      1        ONLINE  ONLINE       oel6-112-rac1            STABLEora.scan3.vip      1        ONLINE  ONLINE       oel6-112-rac1            STABLE Ahora lo que vamos a hacer , es evaluar que pasaría, si por ejemplo, el recurso de ASM llegara a fallar en nuestro nodo [oracle@oel6-112-rac1 ~]$ crsctl eval fail resource ora.asm Stage Group 1: -------------------------------------------------------------------------------- Stage Number Required Action --------------------------------------------------------------------------------      1    N Create new group (Stage Group = 2)    Y Resource 'ora.asm' (1/1) will be in state [ONLINE|INTERMEDIATE] on server [oel6-112-rac1]    Y Resource 'ora.asm' (2/1) will be in state [ONLINE|INTERMEDIATE] on server [oel6-112-rac2] -------------------------------------------------------------------------------- Stage Group 2: -------------------------------------------------------------------------------- Stage Number Required Action --------------------------------------------------------------------------------      1    N Resource 'ora.proxy_advm' (oel6-112-rac2) will be in state [ONLINE|INTERMEDIATE] on server [oel6-112-rac2] --------------------------------------------------------------------------------  Como vamos a ver a continuación, no es lo mismo se decidiéramos detener el recurso, en este caso tenemos que forzarlo , ya que es un recurso que no se puede detener sin la opción "-f":  [oracle@oel6-112-rac1 ~]$ crsctl eval stop resource ora.asm Stage Group 1: -------------------------------------------------------------------------------- Stage Number Required Action --------------------------------------------------------------------------------      1    N Error code [222] for entity [ora.asm]. Message is [CRS-2529: Unable to act on 'ora.asm' because that would require stopping or relocating 'ora.DATA.dg', but the force option was not specified]. -------------------------------------------------------------------------------- [oracle@oel6-112-rac1 ~]$ crsctl eval stop resource ora.asm -f Stage Group 1: -------------------------------------------------------------------------------- Stage Number Required Action --------------------------------------------------------------------------------      1    Y Resource 'ora.DATA.dg' (oel6-112-rac1) will be in state [OFFLINE]    Y Resource 'ora.DATA.dg' (oel6-112-rac2) will be in state [OFFLINE]    Y Resource 'ora.orcl.db' (2/1) will be in state [OFFLINE]    Y Resource 'ora.proxy_advm' (oel6-112-rac1) will be in state [OFFLINE]      2    Y Resource 'ora.asm' (1/1) will be in state [OFFLINE]    Y Resource 'ora.asm' (2/1) will be in state [OFFLINE] --------------------------------------------------------------------------------  Como puedes ver, es una característica nueva y pequeña, pero bastante util para evaluar todos tus comandos de crsctl sin impactar a ninguno de tus recursos. Así te permitira valorar el impacto que tendra el comando que vas a ejecutar. Puedes encontrar mas información en: Utilizando el comando eval

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >