Search Results

Search found 2101 results on 85 pages for 'nvidia geforce'.

Page 16/85 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

    - by user72681
    When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

    Read the article

  • Nvidia problems. I think.

    - by Nate D.
    Let me start off by saying, I've been trying to run Ubuntu on my custom PC for about 2 years. From 10.04 to 12.04, this problem persists. When I try to boot Ubuntu from either a USB stick or a CD, I see the normal Ubuntu splash screen. It looks like it's working, orange dots are moving, but then the screen glitches and freezes. I'm assuming this happens because there are no drivers for my graphics card (Nvidia GeForce 8800, I think). My motherboard has no onboard graphics, nor does it have a VGA out. So, how can I get this working on my system? Can I somehow put the drivers along side the .img on the USB stick? I can boot from my Ubuntu USB stick on my MacBook. In case that helps anyone...

    Read the article

  • Why do the Nouveau drivers work better than the Nvidia ones?

    - by user50774
    I have a bit of a weirdie here. My rig uses an Nvidia GeForce 8600 GTS in a PCIE x16 slot. Up to about a year ago, no problems with the card. I then started getting random crashes. They got more frequent. Now, first thought: It's an old card. But I don't have the bucks to buy a new one, and my mobo doesn't have the DVI input that my monitor needs. So, I decided to take a shot with the Nouveau drives. Amazingly, they have worked flawlessly. Does anyone have a guess as to why?

    Read the article

  • How can I increase resolution when impossible to set up nvidia driver?

    - by Asimov4
    I was stuck at 1024x758 before creating an /etc/X11/xorg.conf file as follows which works well to allow me to have a resolution of 1920x1200 with the vesa driver. Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" EndSubSection EndSection But now my display is kind of slow. I have an NVIDIA GeForce 8600GT but really cannot find how to set up the driver to work. Are there any alternatives to VESA that would work faster?

    Read the article

  • Setting up two screens in Xorg

    - by viraptor
    I'be got two Nvidia cards, but Xorg activates only one of them. The following config is based on the nvidia configurator output: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "HP LE2201w" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Acer AL2017" HorizSync 30.0 - 82.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 6100 nForce 405" BusID "PCI:0:13:0" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 8400 GS" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection What I see in the log file is: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 11:08:08 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (==) No device specified for screen "Screen0". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (==) No device specified for screen "Screen1". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices even though later on both cards are detected: (--) PCI:*(0:0:13:0) 10de:03d1:1019:2601 nVidia Corporation C61 [GeForce 6100 nForce 405] rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 10de:0422:0000:0000 nVidia Corporation G86 [GeForce 8400 GS] rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ --- some more logs --- ] (II) Mar 19 11:08:10 NVIDIA(0): NVIDIA GPU GeForce 6100 nForce 405 (C61) at PCI:0:13:0 (II) Mar 19 11:08:10 NVIDIA(0): (GPU-0) [ --- some more logs --- ] (II) Mar 19 11:08:12 NVIDIA(GPU-1): NVIDIA GPU GeForce 8400 GS (G86) at PCI:2:0:0 (GPU-1) Unfortunately later on only one card is initialised and one screen is active. Xrandr shows only one screen too. Any ideas on how to fix it?

    Read the article

  • Nvidia Ion HDMI output problems with Acer Revo

    - by Techfeeler
    I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

    Read the article

  • Nvidia Ion HDMI output problems.

    - by Techfeeler
    I bought ACERREVO, first I connected it to the SONY TV Via HDMI output for few days it worked very well and one fine day when switch the computer on it boots and TV screen becomes black and message on the TV shows -no input signal. I connect it to Samsung LED TV, it did the same. What do you guys think the problem is how to tackle this issue. Any help is deepley appreciated.

    Read the article

  • Nvidia Ion HDMI output problems with Acer Revo

    - by Techfeeler
    I bought an Acer Revo. First I connected it to my Sony TV via HDMI output. For a few days it worked very well. Then one day when switching on the computer, it boots and the TV screen turns black and the TV displays the error message "no input signal". I connected the Revo to a Samsung LED TV, and it did the same. What do you guys think the problem is? How do I tackle this issue? Any help is deeply appreciated.

    Read the article

  • nVidia Control Panel Won't Recognize SLI

    - by Nakaan
    So yesterday I bought a brand new, 1,000W PSU to replace my 650W one and to allow for SLI. I install it and my second card (both are GTX 560 ti cards). I reinstalled my drivers and my system recognizes both cards. The control panel says "GTX 560 ti x2", I can select between them for Physx, sound output, picture output (although I only have one hooked up to my monitor), etc. But the kicker is I can't turn on SLI. Everything I've read says I'll get a balloon notification saying I can use SLI and the control panel will have a new section, etc, but none of those things happens. Anyone have any ideas? System: Win7 Professional x64 2x GTX 560 ti 3.1 GHz Intel Core i5 1,000W Xion PSU 8GB RAM (Can't think of my motherboard right now) Note: My PSU and MOBO both say they're SLI certified and I'm using an SLI bridge. Edit: Formatting changes

    Read the article

  • NVIDIA SLI - Screen blinking

    - by eks
    I have tried multiple drivers and multiple games ( Games tried, Darkfall and source based games). Drivers tried ( 18x,29x and 24x). When i disable SLI the games work perfectly. A description of the blinking effect would be its like one of the video cards are not sending the image to screen.

    Read the article

  • How to reassign drive back into MediaShield (nvidia) RAID stripe

    - by scottwed
    So I managed to inadvertently remove the RAID configuration from 1 drive of a 2 drive stripe. I have both drives, unmodified, and undamaged. Specifically for MediaShield RAID, is there any way to reattach the 2nd drive back into the stripe? Current state is the stripe is displayed in Error status, and I have the other drive available, but unassigned. I strongly suspect there is no solution without purging the array completely and redefining the stripe, but I figured it was worth asking before I wipe out the data.

    Read the article

  • T61, NVidia, Ubuntu 9.10 == Video problems

    - by David Lazar
    Hi, Upgraded to latest Ubuntu, currently 9.10. Videos used to work fine. Now, playing videos using VLC or any other media player shows them 'sepia' tinged when playing. This is annoying. I remember this used to happen on occasion (after resuming from suspect), and I forget what I fiddled with to make it better. Does anyone have the method to force video to render correctly with this combination? It happens even after a reboot. Thanks

    Read the article

  • Nvidia 9800GT randomly prevents computer from booting

    - by Blender
    My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

    Read the article

  • How to use integrated Intel graphics instead of Nvidia graphics on MacBook Pro?

    - by Benjamin Geese
    I am running Ubuntu 12.04 64bit on MacBook Pro 15" 2010 (MacBookPro6,2) and I would like to use the integrated Intel graphics instead of the dedicated Nvidia graphics Ubuntu boots with on this machine. I am booting with UEFI, not REFIT or similar. I managed to switch to UEFI with the help of this page. This wiki page also contains tips on switching to Intel graphics which include some (for me) cryptic boot commands to grub. However if I follow the guide, my display stays just black. Currently, I am only looking for solution to use Intel graphics for Ubuntu to save power and keep my MacBook cool. Dynamic switching or stuff like that is not required.

    Read the article

  • can't login to Unity always login to Unity 2D

    - by Goddard
    I select Ubuntu on login and it always loads Unity 2D. I ran /usr/lib/nux/unity_support_test -p And got this error X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 137 (NV-GLX) Minor opcode of failed request: 4 () Resource id in failed request: 0x21f Serial number of failed request: 42 Current serial number in output stream: 42 I'm using 12.04 with all the latest updates. nvidia-installer --version nvidia-installer: version 295.53 (buildmeister@swio-display-x86-rhel47-07.nvidia.com) Sat May 12 00:34:26 PDT 2012 The NVIDIA Software Installer for Unix/Linux. This program is used to install, upgrade and uninstall The NVIDIA Accelerated Graphics Driver Set for Linux-x86_64. Copyright (C) 2003 - 2010 NVIDIA Corporation.

    Read the article

  • How do I remove Nvidia drivers and revert to nouveau (12.04)?

    - by Zark
    I'd like to give the new nouveau drivers a try. When I try a Ubuntu live distro, they work pretty flawlessly, but I don't seem to be able to use them correctly on my installed system. What I do is remove Nvidia drivers from the Additional drivers utility and reboot, but what I get is no 3D acceleration and low resolution on my monitor. What am I doing wrong? I wonder if I might have broken something when I messed up with grub trying to fix the infamous plymouth splash screen... Thanks for your support

    Read the article

  • runt integrated intel graphics card + nvidia pcie graphics card?

    - by Roberto
    Its days I am searching for information/help. Is this possible at all? I am running Ubuntu 11.10 on an intel core i3 530 on a intel dh55hc mainboard. I have 2 monitors attached, one on dvi and one on hdmi. I want to ad a third or eaven a fourth monitor using an additional graphics card nvidia in pcie slot. I cant get an image on all monitors at the same time. I am wondering if this is possible at all? Any ideas where I can get information about this? Thanks in advance Roberto

    Read the article

  • How can I reconfigure the nvidia proprietary drivers from the command line (ssh)?

    - by Mathieu Pagé
    I have a linux HTPC (running XBMC) in my living room. This morning I ssh'ed into the machine and did upgrade it to 10.10. When it finaly resarted it says something about running in low quality graphics and eventually returned to a command line login prompt. I ssh'ed in again and did a sudo reboot now. When it came back on this time the image is rapidly scrolling from the top to the bottom of the screen. I guess the installed driver doesn't quite work with the S-Video port on which the TV is connected. previously it was working right with the nvidia proprietary drivers. How can I install thoses without using the GUI tool that comes with Ubuntu?

    Read the article

  • From where can I install my nVidia drivers? [closed]

    - by Arthur Wulf White
    Possible Duplicate: How do I install extra drivers? Additional Drivers tool in Ubuntu 12.10? I have read here and here that I should be able to install drivers. So I'm finding the Additional Drivers menu. To install nVidia driver. I started looking for System -> Administration and not finding it. I have an icon that says System Settings and it has any option related to drivers. NOTE: I am using Ubuntu 12.10.

    Read the article

  • How do I turn off nVidia high performance mode?

    - by gpen06
    I am new to Ubuntu 11.10 and never touched linux until today. I installed Ubuntu alongside with Windows 7. I have an issue with my laptop overheating and freezing when it uses the high performance GPU graphics mode (hybrid card). It is an easy fix for Windows 7. I simply set the graphics mode manually to the low performance integrated graphics (save power) mode using advanced power settings. In Ubuntu, I'm stumped at how to do this. When using Ubuntu, my laptop is showing the same symptoms as it did without the fix for Windows. I have the nVidia graphics driver installed for Windows which allows me to see which mode I am in. I downloaded it off of my laptop's website (ASUS). They do not offer driver downloads for linux. Screenshot of power settings in Windows 7

    Read the article

  • How to repackage NVIDIA .run drivers into .deb with DKMS

    - by Delan Azabani
    At present, Ubuntu offers the 195.36.24 drivers as nvidia-current in their repository. This packaged driver is pretty cool as it uses DKMS so you don't have to keep reinstalling the driver after a new kernel version. The NVIDIA .run package drivers are at version 257 (beta) but they don't use DKMS so the graphics screws up every time a new kernel is installed and you don't reinstall the driver. How can I modify the .run to use DKMS and even better, package it as a deb package?

    Read the article

  • Never before had a problem with Ubuntu desktop graphical display; Trying to use nvidia GT630

    - by focaccio
    I've been using ubuntu since 9.04 and never had a problem with Ubuntu brining up the desktop graphical user interface. However I am currently not able to see anything graphical past the install screens. I have an Intel DP55KG motherboard and just installed an nvidia gt630 graphics card (zotac), since the old graphics card failed. I can install the server and see text. So I do a apt-get install ubuntu-desktop...or apt-get install kubuntu-desktop...or apt-get install xubuntu desktop, but after the reboot there is no display...its like something is hung up. I tried using the Live quantal dvd and I do see the graphical prompt to try without installing, but after that the screen goes blank. I've tried two monitors and the same thing happens. There is a faint "glow" on the screen and I do not get a "no input signal" from the monitor, so something is happening. I can install an old OEM of XP so I know the video card and motherboard are at least semi functional. Any help is appreciated. Thanks, Greg

    Read the article

  • Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

    - by Chantz
    So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >