Search Results

Search found 2101 results on 85 pages for 'nvidia geforce'.

Page 17/85 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Triple monitors on hybrid video system GeForce+Intel

    - by v_mil
    I use Lenovo Ideapad Z580A with hybrid video: GeForce+Intel with Ubuntu 12.10 x64 Ukrainian. It has internal display and two outputs: HDMI and VGA. When I connect third display to VGA all displays go black. Pressing alt+backspace and login causes output to two displays: internal and VGA. System Settings - Displays (or monitors - I have Ukrainian interface) shows three displays: two are on, one (DVI) is off. Turning DVI on and pressing apply causes an error: Can not set configuration of controller CRTC 65. BIOS setting is Optimus (two video cards). Driver for GeForce is Nouveau. With best regards. Viktor.

    Read the article

  • If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

    - by Enigma
    Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

    Read the article

  • Resolution stuck after playing OpenGL game

    - by kit.yang
    I used to start the game,Frozen Throne (using wine) with the option of "-opengl".When I entered the game,the resolution will changed,and restored after exit the game. But this time a problem happened.The resolution can't restore although I restart my computer several times. Both the Ubuntu pane and login windows are exceptional. nvidia-settingsalso detect the resolution is "1024 x 768",But it seemed useless using this tool. Screenshot-NVIDIA X Server Settings: the result of xrandr: Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 576x432 57.0 512x384 58.0 400x300 59.0 60.0 61.0 320x240 62.0 the configure of /etc/X11/xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Entry Graphics" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1024x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

    - by Noob.
    Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

    Read the article

  • How to make Unity 3D work with Bumblebee using the Intel chipset

    - by EboMike
    I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

    Read the article

  • Dual Monitor in Ubuntu 11.10 is resetting the theme

    - by Mengu
    i'm experiencing a strange problem with dual monitors. when i set the dual monitor via "nvidia settings" and save the setting to xorg.conf, the default unity theme and icons are turning back to gtk default. i also get an error telling me "could not apply the stored configuration for monitors" here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@yellow) Fri Aug 5 12:31:28 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Chi Mei Optoelectronics corp." HorizSync 30.0 - 75.0 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: 1680x1050 +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection here is an example of what i'm talking about: http://i.stack.imgur.com/vrlW1.png how can i fix this? thanks in advance.

    Read the article

  • New Nvidia Video Driver for Linux Supports X Server 1.8

    <b>Softpedia:</b> "Nvidia announced a few days ago, on its forum, a new version of its proprietary driver for the Nvidia graphics cards. Nvidia 195.36.24 adds support for new GPUs, and fixes a few issues. But the most important thing is that Nvidia 195.36.24 has support for X Server 1.8."

    Read the article

  • Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

    Read the article

  • blacklist VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE

    - by Thomas Labensi
    I have an hp a310n pavillion I have installed an nvidia pci geforce card I want to blacklist the VGA compa[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)integrated graphics what do I need to do?? tom@tom-DM167A-ABA-a310n:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 02:09.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] (rev b2) tom@tom-DM167A-ABA-a310n:~$ I'm using the nvidia via neuvoux and I want to really make sure I'm using the nvidia card

    Read the article

  • Xrandr settings don't stick; bash script fails; Nvidia; disper doesn't work

    - by bcmcfc
    I have an Nvidia graphics card. Yeah, I know. This might have to change soon. I am trying to get the resolution to set correctly on my second monitor, which is a VGA monitor with a native resolution of 1440x900. I have set up this bash script which doesn't work: xrandr --newmode "1440" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync xrandr --addmode -display VGA-1 1440 xrandr --output VGA-1 --mode 1440 It outputs: xrandr: cannot find mode 1440. It has worked previously when running the commands individually but after a restart it fails. I've also just installed disper as per this question but have no idea how to use it - the help suggests the command: disper -d VGA-1 -r "1440x900" should work, but it does not. It just outputs the help text, suggesting something is wrong but not saying what. Is there any way to get these horrific Nvidia drivers working properly with a resolution that is not detected by the tools?

    Read the article

  • Which driver should I use with a 9600 GT Mobile?

    - by lisalisa
    I checked the Additional Drivers offered for my card and I saw four options: NVIDIA accelerated graphics drivers (version 173) NVIDIA accelerated graphics drivers (post-release updates) (version 173-updates) NVIDIA accelerated graphics drivers (version current) (Recommended) NVIDIA accelerated graphics drivers (post-release updates)(version current-updates) I'm not sure which one to pick. I want a driver that's stable but also takes advantage of my card's hardware.

    Read the article

  • What To Do w Driver Which is "Activated But Not Currently in Use"

    - by John
    Ubuntu 12.04, Graphics Card: GeForce-4 MX 420, From Nvidia Website, Downloaded NVIDIA-Linux-x86-96.43.18.pkg1.run Moved it from Downloads Folder to "Nvidia Folder" I searched for "Additional Drivers" I got a response that Nvidia-(Current) was "Activated But Not Currently in Use" 6a. Did I download it incorrectly? 6b. Did I Move, Open or Install it incorrectly? 6c. Want to update driver to improve rendering 6d. Not sure what to do next

    Read the article

  • How To Make NVIDIA’s Optimus Work on Linux

    - by Chris Hoffman
    Many new laptops come with NVIDIA’s Optimus technology – the laptop includes both a discrete NVIDIA GPU for gaming power and an onboard Intel GPU for power savings. The notebook switches between the two when necessary. However, this isn’t yet well-supported on Linux. Linus Torvalds had some choice words for NVIDIA regarding Optimus not working on Linux, and NVIDIA is now currently working on official support. However, if you have a laptop with Optimus support, you don’t have to wait for NVIDIA — you can use the Bumblebee project’s solution to enable Optimus on Linux today. Image Credit: Jemimus on Flickr How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

    Read the article

  • Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04

    - by fo_x86
    I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?

    Read the article

  • Is it safe to have NVidia graphics always on on a Linux laptop, or do I risk overheating?

    - by codeape
    I'm getting a Lenovo T520 with two graphics cards: Integrated Intel HD 3000 Discrete NVidia NVS 4200M In BIOS, I can adjust which card(s) to use: Integrated only Discrete only Both (NVidia optimus) Since optimus is not well supported under Linux, I wonder if it is OK to set up the system to use the NVidia card all the time. I have read somewhere that a laptop risks overheating if using a discrete graphics card all the time. Is this true? Does someone have any experience to share?

    Read the article

  • If Nvidia Shield can stream a game via wifi, why can I not do the same via ethernet to any other PC?

    - by Enigma
    I think it absurd that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. I can only assume that there must be some reason behind this or a limitation preventing this, but what? 150mbps wifi is in no way superior to a 1000mbps LAN connection aside from well wireless mobility. Not only that but I have a secondary laptop and desktop which should by hardware comparison completely outperform anything the Tegra in the Nvidia Shield can do. Is this all just a marketing scheme to force people to buy the shield for the streaming benefit? Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable for me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? (*) - perhaps this isn't the first but afaik it is the first complete package.

    Read the article

  • Comparing 128MB GeForce 8600GT and 512MB Radeon X1650

    - by Synetech inc.
    Hi, I'm trying to determine which is the better of these two video cards: 128MB Nvidia GeForce 8600GT card while the other has a 512MB ATI Radeon X1650 card. Both cards are the upper-level mid-range versions of their respective series. On the one hand, the ATI has substantially more VRAM, but the Nvidia supports D3D 10 and SM4.0 as opposed to D3D 9.0c/SM3.0 that the ATI supports. Also, I have always heard better things about Nvidia cards compared to ATI cards. I'm trying to find some advice on which one is better, but I can't find any actual comparisons or anything for these specific cards (the comparisons I can find are only similar ones like the X1650 Pro or 8600GT PCI-E), so I figure that what I need to know is whether the extra VRAM is that important. Looking at the ATI table and the Nvidia table seems to indicate that the Nvidia is better, but then again, the Nvidia table also says that the GeForce 8600GT is a PCI-E card with at least 256MB even though the card in question is an AGP with 128MB. (:-?) (It looks like the ATI card is not supported in Windows 7 while the Nvidia card is, which I suppose is also a factor, though not quite as immediately relevant as performance.) Any ideas? Thanks a lot.

    Read the article

  • Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

    - by mckenzieg1
    On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

    Read the article

  • How to change metamode in xorg.conf so that my game in FHD will be displayed only in the external monitor?

    - by Patryk
    I would like to launch my game only in the external monitor which I have attached to my laptop with hdmi cable. This is my current xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 319.60 (buildmeister@swio-display-x64-rhel04-15) Wed Sep 25 15:17:31 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "metamodes" "1024x786,NULL;1280x720,NULL;NULL,1680x1050;NULL,1920x1080" SubSection "Display" Depth 24 EndSubSection EndSection Although with this config nothing changes (I have my game displayed in the laptop screen and exceeding a little bit onto the external monitor since I set it to be in 1920x1080) I have read this https://help.ubuntu.com/community/XineramaHowTo but with no luck of solving this issue. The only temporary solution for this problem now is to manually switch of the laptop display and then launch the game.

    Read the article

  • Ubuntu boots into tty1 after driver downgrade

    - by Zach
    Earlier today I downgraded the driver for my nvidia 240 GT from version 310 to version 304 using ubuntus "additional drivers" utility. After the install I rebooted but instead of opening unity and allowing me to login it booted into tty1 instead. After using the "startx" command I got the message, "nvidia: API mismatch: the nvidia kernel module has version 310.14, but this nvidia driver component has version 304.43." What can I do to solve this? Edit: Solved my own problem by purging all nvidia packaged and reinstalling my drivers.

    Read the article

  • Ubuntu 14.04 doesn't detect my discrete GPU

    - by user258887
    I recently purchased a laptop with an Nvidia GeForce 860m, and have installed Ubuntu 14.04. On my old laptop I had 12.04, which automatically filled Additional Drivers with Nvidia drivers. But on this computer, the only thing in Additional Drivers is Qualcomm. So I manually installed Nvidia, but X Server Settings doesn't seem to detect any GPU... lspci | grep VGA reports only my integrated Intel GPU, but lspci -v reports many things, including the Nvidia GPU: 01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2) Subsystem: ASUSTeK Computer Inc. Device 157d Flags: fast devsel, IRQ 16 Memory at ec000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at ed000000 [disabled] [size=512K] Capabilities: access denied Don't know what any of that means. Not sure if it's supposed to say 'access denied'... I need my GPU to do CUDA and OpenGL programming. What else can I do to figure out why this isn't working?

    Read the article

  • How to run .run files? Not a root user

    - by user108056
    I have a Nvidia driver in my computer(Asus K55V Series) but it's missing the programe to run it so i can't use it. So i have downloaded the programe for nvidia through Http://www.nvidia.com/Download/index.aspx?lang=en-us but it's a .run file and i don't have programmes to run it. Product Type: GeForce Product Series: GeForce 600MSeries (Notebooks) Product: GeForce GT 630M Operating System: Linux 32bits (ubuntu) Language: I'm portuguese so i've selected Português (Brasil) but it doesn't really matter in the instalation. Help!

    Read the article

  • Why does Windows 7 overall performance is better than Ubuntu 11.10?

    - by user37805
    I have a i7 2600 processor, 8Gb DDR3 ram, nVidia GTX570, and Ubuntu takes 45-50 seconds to boot and 32-35 seconds to power off, while windows 7 boots in 20-25 seconds and shuts down in 10 seconds. Both OS with autologin enabled, and in dual boot. Ubuntu is slow with preload too, and doesn't show any boot splash after installing drivers and didn't recognize my nVidia graphics card on jockey GTK, I had to add x swat repository and that didn't worked. I installed proprietary drivers through terminal (nvidia-common, nvidia-settings) in order to have 3d acceleration. But it doesn't make any difference on the speed. I also have a Pentium 4 PC and ubuntu 11.10 is way faster than windows 7 or XP. Also with nvidia graphics card and preload. http://paste.ubuntu.com/924890/ there is my boot script, sorry but some words are in Spanish because my ubuntu is in Spanish. Not using WUBI, Ubuntu has its own partition, 64-bits, and Matlab 2011 has very low performance compared to windows version.

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >