Search Results

Search found 2840 results on 114 pages for 'ports'.

Page 16/114 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Windows: Does something temporarily grab the com ports on startup?

    - by Tim
    I have a WPF/C# app that is launched as part of the "Startup" group on a Windows Embedded Standard machine. One of the first things the app does (in its static App() method) is create a new SerialPort object for COM1. COM1 is a hardwired serial port, not a USB virtual port or anything like that. My problem is that every so often (maybe 1 out of 12) on startup, I get an exception: System.UnauthorizedAccessException: Access to the port 'COM1' is denied. There are no other applications using this port. Also, when I relaunch the app following this error, it grabs the port just fine. It's as if the com port isn't ready/set up for my app sometimes. I'm clueless on this one! Any insight is appreciated! UPDATE: I added a call to SerialPort.GetPortNames() and printout all available ports before attempting to open the port. In the failure case COM1 is indeed THERE! So, it's not that the port isn't ready. It looks like something in Windows is actually grabbing the port temporarily and blocking me.

    Read the article

  • C# SerialPort - Problems mixing ports with different baud rates.

    - by GrandAdmiral
    Greetings, I have two devices that I would like to connect over a serial interface, but they have incompatible connections. To get around this problem, I connected them both to my PC and I'm working on a C# program that will route traffic on COM port X to COM port Y and vice versa. The program connects to two COM ports. In the data received event handler, I read in incoming data and write it to the other COM port. To do this, I have the following code: private void HandleDataReceived(SerialPort inPort, SerialPort outPort) { byte[] data = new byte[1]; while (inPort.BytesToRead > 0) { // Read the data data[0] = (byte)inPort.ReadByte(); // Write the data if (outPort.IsOpen) { outPort.Write(data, 0, 1); } } } That code worked fine as long as the outgoing COM port operated at a higher baud rate than the incoming COM port. If the incoming COM port was faster than the outgoing COM port, I started missing data. I had to correct the code like this: private void HandleDataReceived(SerialPort inPort, SerialPort outPort) { byte[] data = new byte[1]; while (inPort.BytesToRead > 0) { // Read the data data[0] = (byte)inPort.ReadByte(); // Write the data if (outPort.IsOpen) { outPort.Write(data, 0, 1); while (outPort.BytesToWrite > 0); //<-- Change to fix problem } } } I don't understand why I need that fix. I'm new to C# (this is my first program), so I'm wondering if there is something I am missing. The SerialPort defaults to a 2048 byte write buffer and my commands are less than ten bytes. The write buffer should have the ability to buffer the data until it can be written to a slower COM port. In summary, I'm receiving data on COM X and writing the data to COM Y. COM X is connected at a faster baud rate than COM Y. Why doesn't the buffering in the write buffer handle this difference? Why does it seem that I need to wait for the write buffer to drain to avoid losing data? Thanks!

    Read the article

  • how to allow certain packet with certian destination ports to forward using iptables?

    - by moataz metwally
    i have server and i virualized it into multiple windws vps's using kvm. i would like to make all vps behind the server firewall. to control all the ports of all vps's from the host server.i have tried to do this by that iptables file but it still blocking all the forward packets. when i remove -A FORWARD -j DROP from the file the vps will be out of the firewall control : # Generated by iptables-save v1.4.7 on Mon Oct 21 04:30:35 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [49:7546] -A OUTPUT -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j DROP -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp -m multiport --dports 5901:6010,4080:4085 -j ACCEPT -A FORWARD -p tcp -s 0/0 -d 0/0 --destination-port 3389 -j ACCEPT -A INPUT -j DROP -A FORWARD -j DROP COMMIT # Completed on Mon Oct 21 04:30:35 2013 and my ifconfig output: eth0 Link encap:Ethernet HWaddr 6C:62:6D:EF:B8:77 inet6 addr: fe80::6e62:XXX:feef:b877/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4460000 errors:0 dropped:0 overruns:0 frame:0 TX packets:1825697 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5461498823 (5.0 GiB) TX bytes:547852516 (522.4 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6380 errors:0 dropped:0 overruns:0 frame:0 TX packets:6380 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6481652 (6.1 MiB) TX bytes:6481652 (6.1 MiB) natbr2 Link encap:Ethernet HWaddr 52:54:00:48:72:53 inet addr:88.XXX.XXX.X53 Bcast:88.198.242.159 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1338720 errors:0 dropped:0 overruns:0 frame:0 TX packets:3570844 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:434791198 (414.6 MiB) TX bytes:4321751647 (4.0 GiB) viif1001 Link encap:Ethernet HWaddr FE:16:3E:0F:41:D8 inet6 addr: fe80::fc16:XXX:fe0f:41d8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:358229 errors:0 dropped:0 overruns:0 frame:0 TX packets:479289 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:50127351 (47.8 MiB) TX bytes:261223068 (249.1 MiB) viif1002 Link encap:Ethernet HWaddr FE:16:3E:EA:65:FA inet6 addr: fe80::fc16:XXX:feea:65fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:575590 errors:0 dropped:0 overruns:0 frame:0 TX packets:1489296 errors:0 dropped:0 overruns:5412 carrier:0 collisions:0 txqueuelen:500 RX bytes:243629668 (232.3 MiB) TX bytes:1724640936 (1.6 GiB) viif1003 Link encap:Ethernet HWaddr FE:16:3E:2B:85:0E inet6 addr: fe80::fc16:XXX:fe2b:850e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:413052 errors:0 dropped:0 overruns:0 frame:0 TX packets:1741801 errors:0 dropped:0 overruns:299 carrier:0 collisions:0 txqueuelen:500 RX bytes:147931054 (141.0 MiB) TX bytes:2338132498 (2.1 GiB) viifbr0 Link encap:Ethernet HWaddr 6C:62:6D:EF:B8:77 inet addr:176.XX.XX.X9 Bcast:176.9.0.95 Mask:255.255.255.224 inet6 addr: fe80::6e62:XXX:feef:b877/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2685666 errors:0 dropped:0 overruns:0 frame:0 TX packets:1472089 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4244043694 (3.9 GiB) TX bytes:523110523 (498.8 MiB)

    Read the article

  • Networking switch setup

    - by Crash893
    I have two 48 port gigabit netgear switches with 2 SFP ports each (i also have two Mini-GBIC copper transceiver modules) Is it best to set the ports up by using the built in ports (ie plug port 1 of switchB into port 48 of switchA and port1 of switchA into the router) or is there an advantage to using the mini-gbic? (lets call the sfp ports 49 and 50) router - port 49 on switchA, port 50 switchA - port 49 SwitchB

    Read the article

  • ubuntu 10.04 logs itself out overnight

    - by Corey
    Every night when I leave work, I lock the screen via ubuntu's "power" button in the top right hand panel. When I come to work in the morning, I'm greeted with the log-in screen. This doesn't happen every night, but most. I'm running ubuntu 10.04 on a Dell inspiron. I've included some HW specs, and also dmesg output. Please let me know what other logs may be useful. thanks! Corey ~$ dmesg [20559.696062] type=1503 audit(1285957687.048:16): operation="open" pid=6212 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [21127.951621] type=1503 audit(1285958255.300:17): operation="open" pid=6390 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [291038.528014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.528025] render error detected, EIR: 0x00000000 [291038.528042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973891 at 22973890) [291038.828014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.828023] render error detected, EIR: 0x00000000 [291038.828042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973894 at 22973890) ~$ lspci -vv 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at dc00 [size=8] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 log$ tail -n 15 Xorg.0.log.old for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) Power Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) USB Optical Mouse: Close (II) UnloadModule: "evdev" (II) Dell Dell USB Entry Keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) AIGLX: Suspending AIGLX clients for VT switch ddxSigGiveUp: Closing log

    Read the article

  • usb mouse/keyboard doesn't work with 3.11.0-12-generic kernel

    - by x-yuri
    I can't use my usb keyboard/mouse after upgrade from raring to saucy. The keyboard works in grub menu and if I boot with the previous kernel version (3.8.0-31-generic). My new kernel version is 3.11.0-12-generic. I've got Mad Catz R.A.T.7 wired USB mouse, Canyon CNL-MBMSO02 wired usb mouse and Logitech diNovo Edge wireless keyboard, connected to computer through Logitech Unifying Receiver. Using PS/2 keyboard I've managed to get some information. dmesg says: [ 0.166273] ACPI: bus type USB registered [ 0.166273] usbcore: registered new interface driver usbfs [ 0.166273] usbcore: registered new interface driver hub [ 0.166273] usbcore: registered new device driver usb ... [ 3.534226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.534228] ehci-pci: EHCI PCI platform driver [ 3.534291] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 3.534299] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 3.534304] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.534315] ehci-pci 0000:00:1a.7: debug port 1 [ 3.538218] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 3.538231] ehci-pci 0000:00:1a.7: irq 18, io mem 0xd3325400 [ 3.548017] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.548042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.548045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.548048] usb usb1: Product: EHCI Host Controller [ 3.548050] usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd [ 3.548053] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.548155] hub 1-0:1.0: USB hub found [ 3.548159] hub 1-0:1.0: 6 ports detected [ 3.548311] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 3.548319] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 3.548323] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.548333] ehci-pci 0000:00:1d.7: debug port 1 [ 3.552228] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 3.552239] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd3325000 [ 3.564014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.564044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.564047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.564050] usb usb2: Product: EHCI Host Controller [ 3.564052] usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd [ 3.564056] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.564163] hub 2-0:1.0: USB hub found [ 3.564167] hub 2-0:1.0: 6 ports detected [ 3.564274] ehci-platform: EHCI generic platform driver [ 3.564280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.564281] ohci-platform: OHCI generic platform driver [ 3.564287] uhci_hcd: USB Universal Host Controller Interface driver [ 3.564345] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.564347] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.564352] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.564378] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0 [ 3.564402] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.564404] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.564406] usb usb3: Product: UHCI Host Controller [ 3.564408] usb usb3: Manufacturer: Linux 3.11.0-12-generic uhci_hcd [ 3.564410] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.564478] hub 3-0:1.0: USB hub found [ 3.564482] hub 3-0:1.0: 2 ports detected [ 3.564589] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.564592] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.564597] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.564623] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0 [ 3.564647] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.564649] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.564651] usb usb4: Product: UHCI Host Controller [ 3.564653] usb usb4: Manufacturer: Linux 3.11.0-12-generic uhci_hcd [ 3.564654] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.564727] hub 4-0:1.0: USB hub found [ 3.564730] hub 4-0:1.0: 2 ports detected [ 3.564834] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.564837] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.564843] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.564863] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080 [ 3.564885] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.564887] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.564889] usb usb5: Product: UHCI Host Controller [ 3.564891] usb usb5: Manufacturer: Linux 3.11.0-12-generic uhci_hcd [ 3.564892] usb usb5: SerialNumber: 0000:00:1a.2 [ 3.564962] hub 5-0:1.0: USB hub found [ 3.564966] hub 5-0:1.0: 2 ports detected [ 3.565073] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.565076] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.565081] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.565101] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060 [ 3.565124] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.565127] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.565128] usb usb6: Product: UHCI Host Controller [ 3.565130] usb usb6: Manufacturer: Linux 3.11.0-12-generic uhci_hcd [ 3.565132] usb usb6: SerialNumber: 0000:00:1d.0 [ 3.565195] hub 6-0:1.0: USB hub found [ 3.565198] hub 6-0:1.0: 2 ports detected [ 3.565303] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.565306] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.565310] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.565329] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040 [ 3.565352] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.565354] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.565356] usb usb7: Product: UHCI Host Controller [ 3.565358] usb usb7: Manufacturer: Linux 3.11.0-12-generic uhci_hcd [ 3.565359] usb usb7: SerialNumber: 0000:00:1d.1 [ 3.565424] hub 7-0:1.0: USB hub found [ 3.565427] hub 7-0:1.0: 2 ports detected [ 3.565534] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.565537] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.565541] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.565560] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f020 [ 3.565584] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.565587] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.565588] usb usb8: Product: UHCI Host Controller [ 3.565590] usb usb8: Manufacturer: Linux 3.11.0-12-generic uhci_hcd [ 3.565592] usb usb8: SerialNumber: 0000:00:1d.2 [ 3.565658] hub 8-0:1.0: USB hub found [ 3.565661] hub 8-0:1.0: 2 ports detected ... [ 4.120014] usb 2-3: new high-speed USB device number 2 using ehci-pci ... [ 4.468908] usb 2-3: New USB device found, idVendor=046d, idProduct=0825 [ 4.468912] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 4.468914] usb 2-3: SerialNumber: AF582E10 ... [ 5.284019] usb 5-2: new full-speed USB device number 2 using uhci_hcd [ 5.465903] usb 5-2: New USB device found, idVendor=046d, idProduct=0b04 [ 5.465908] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.465911] usb 5-2: Product: Logitech BT Mini-Receiver [ 5.465914] usb 5-2: Manufacturer: Logitech [ 5.468948] hub 5-2:1.0: USB hub found [ 5.470898] hub 5-2:1.0: 3 ports detected [ 5.476096] Switched to clocksource tsc [ 5.712099] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 5.896366] usb 7-2: New USB device found, idVendor=046d, idProduct=c52b [ 5.896370] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.896372] usb 7-2: Product: USB Receiver [ 5.896374] usb 7-2: Manufacturer: Logitech [ 6.140016] usb 8-1: new full-speed USB device number 2 using uhci_hcd [ 6.324597] usb 8-1: New USB device found, idVendor=0738, idProduct=1708 [ 6.324603] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.324605] usb 8-1: Product: Mad Catz R.A.T.7 Mouse [ 6.324608] usb 8-1: Manufacturer: Mad Catz [ 6.564012] usb 8-2: new low-speed USB device number 3 using uhci_hcd [ 6.746602] usb 8-2: New USB device found, idVendor=1d57, idProduct=0010 [ 6.746608] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.746610] usb 8-2: Product: usb mouse with wheel [ 6.746613] usb 8-2: Manufacturer: HID-Compliant Mouse [ 7.337898] usb 5-2.2: new full-speed USB device number 3 using uhci_hcd [ 7.490902] usb 5-2.2: New USB device found, idVendor=046d, idProduct=c713 [ 7.490907] usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.490910] usb 5-2.2: Product: Logitech BT Mini-Receiver [ 7.490913] usb 5-2.2: Manufacturer: Logitech [ 7.490915] usb 5-2.2: SerialNumber: 001F203BD6A7 [ 7.569898] usb 5-2.3: new full-speed USB device number 4 using uhci_hcd [ 7.722901] usb 5-2.3: New USB device found, idVendor=046d, idProduct=c714 [ 7.722906] usb 5-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.722909] usb 5-2.3: Product: Logitech BT Mini-Receiver [ 7.722911] usb 5-2.3: Manufacturer: Logitech [ 7.722913] usb 5-2.3: SerialNumber: 001F203BD6A7 lsusb (more output): Bus 002 Device 002: ID 046d:0825 Logitech, Inc. Webcam C270 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 003: ID 1d57:0010 Xenta Bus 008 Device 002: ID 0738:1708 Mad Catz, Inc. Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 004: ID 046d:c714 Logitech, Inc. diNovo Edge Keyboard Bus 005 Device 003: ID 046d:c713 Logitech, Inc. Bus 005 Device 002: ID 046d:0b04 Logitech, Inc. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub More background. Before that I had a problem with logging in to GNOME. During which I upgraded all the packages at one point (apt-get upgrade) and it stopped booting at all (it didn't get to login screen). Then I fixed PATH issue and now I've got this usb-not-working issue. I tried reinstalling kernel, to no effect. Is there anything else I can do to fix or diagnose the problem?

    Read the article

  • WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

    - by user94156
    Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Is it possible to make a persistent USB serial port regardless ofthe existence of the USB device?

    - by Keith Nicholas
    USB serial ports, especially devices which emulate serial ports, don't quite behave the same as old serial ports, which causes a few problems with some software. old serial ports, always existed, they never come and go out of existence. With USB devices that emulate serial ports, they come and go depending on whether they are powered / reset etc. Is there a way under windows to make the USB serial port permanently exist regardless of the presence of the device? (not just come back as the same name as it was before).

    Read the article

  • WPA2 authentication fails using USB network devices (Linksys and Rosewill)

    - by Greg Youtz
    Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

    Read the article

  • Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

    - by Javier
    I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

    Read the article

  • Open port in gufw is closed, no incoming connection on deluge

    - by user66987
    I have a problem configuring gufw. I open ports on it, but when i test in deluge it shows as closed. Any help on setting up the firewall would be greatly appreciated. This is the output I get on the firewall in terminal: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 1346/dnsmasq tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 970/cupsd tcp 0 0 0.0.0.0:55521 0.0.0.0:* LISTEN 17362/python tcp6 0 0 ::1:631 :::* LISTEN 970/cupsd tcp6 0 0 :::55521 :::* LISTEN 17362/python udp 0 0 10.0.0.125:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:1900 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:1900 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53162 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:53 0.0.0.0:* 1346/dnsmasq udp 0 0 0.0.0.0:68 0.0.0.0:* 1312/dhclient udp 0 0 10.0.0.125:36948 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:37240 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:6771 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:6771 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:6771 0.0.0.0:* 17362/python udp 0 0 10.0.0.125:50034 0.0.0.0:* 17362/python udp 0 0 0.0.0.0:58340 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 982/avahi-daemon: r udp 0 0 0.0.0.0:56947 0.0.0.0:* 17362/python udp 0 0 127.0.0.1:57059 0.0.0.0:* 17362/python udp6 0 0 :::49793 :::* 982/avahi-daemon: r udp6 0 0 :::5353 :::* 982/avahi-daemon: r kenneth@kenneth-K53U:~$ sudo ufw status Status: aktive Til Handling Fra --- -------- --- 6881:6891/tcp ALLOW Anywhere 6881:6891/udp ALLOW Anywhere 55521/tcp ALLOW Anywhere 6881:6891/tcp ALLOW Anywhere (v6) 6881:6891/udp ALLOW Anywhere (v6) 55521/tcp ALLOW Anywhere (v6) I also want to be able to use the firewall with linuxdc, so I need other ports open as well. This is connected to the firewall. Because when I turn off the firewall, the port is open. So this is not a problem with my modem. Do I need the firewall? The broadband modem has a hardware firewall. Update: Forgot to add. When my firewall is inactive, it closes ports after a time. So when I use linuxdc, I have to flush iptabels and activating it again. Is this supposed to do this when the firewall is deactivated? Update again: All my ports are closed now, flushing the iptable does not work anymore. I have uninstalled gufw, but still all my ports are closed. And to say it again, this has nothing to do with my broadband modem since it worked when I used windows 7. I need help to open the ports.

    Read the article

  • Over-Current condition on port 7 or 8

    - by Dymatic
    I am having a problem with my USB ports. It shows over-current conditions on ports 7 and 8. I have heard that this is caused by a damaged USB port, and since it is detecting it on two ports it seems that I have two that are broken. I do indeed have two that do not work, so that is not the issue. What I would like to do is disable whatever program is running over-current condition checks. tty's are unusable at this point. Every few second a new over-current condition occurs. Here is the output of dmesg: http://pastebin.com/CuFKRGue Is there an easy way to disable these checks or damage the ports to a point where it will no longer check? Fixing them is not important or an option.

    Read the article

  • Do most front and rear USB connections deliver the same power and performance?

    - by Bratch
    I was reading this Three Monitors For Every User and there were some comments about rear USB ports being able to deliver more power than front USB ports because they are directly connected to the motherboard and closer to the power supply (by circuit board runs). Even though the front USB ports may have connectors farther from the power supply, and there are cables from the motherboard to the front ports, I think that the difference in power would be negligible (unless the case is over 5 meters long). Anyone know for sure if they are the same or different? Note that I'm not talking about an older case where the front might have been USB 1.1 and the rear USB 2.0. A modern case would have USB 2.0 on all ports. And of course using a powered hub would deliver plenty of power.

    Read the article

  • VirtualBox Port Forward

    - by john.graves(at)oracle.com
    A great new feature in VirtualBox 4.0 is the ability to use NAT networking and forward ports without needing to use ssh -L/-R tricks.  This is great for booting multiple VM domains simultaneously.  It is possible to have several instances which map back to the host machine and different ports on localhost:* automatically forward to the correct VM.  This avoids the hassle of setting up dns entries or static IP addresses.In this example, I'm mapping the host ports 3xxxx to the VM's well known server ports.Note: It is important to setup the Frontend HTTP host/port to avoid incorrect URL rewriting.You may also need to setup an http channel to deal with local traffic which uses the network address 10.0.2.15Happy VMing.

    Read the article

  • Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

    - by Javier
    I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

    Read the article

  • I have a WinXP machine with 2 ethernet ports. One is connected to a LAN, another is connected to a WAN. How do I make this work?

    - by HappyEngineer
    I have a WinXP machine which has 2 ethernet ports. The information I've found indicates that the first nic in the advanced settings list is the one that receives all traffic. I'd like to configure them so that all traffic destined for a particular IP range goes to one nic and the rest goes to the other nic. Is that possible? If so, do I need additional software like zonealarm to shape the traffic?

    Read the article

  • how to do display text message from cellphone to textbox

    - by Jiggy Degamo
    I am just making a project automated polling system using sms but i just a beginner of serial communication i have seen a code on the net so i apply it as my guide just a simple text message and display it on the textbox it connects but the provlem is its didn't display on the textbox. here is the code below please help me why it didn't display and please give me a cite that have a tutorial of serial communication using vb.net Imports System.IO.Ports Public Class Form1 Dim inputData As String = "" Private WithEvents serialPort1 As New IO.Ports.SerialPort Public Event DataReceived As IO.Ports.SerialDataReceivedEventHandler Private Sub Form1_FormClosed(ByVal sender As Object, ByVal e As System.Windows.Forms.FormClosedEventArgs) Handles Me.FormClosed ' Close the Serial Port serialPort1.Close() End Sub Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load 'Set values for some properties serialPort1.PortName = "COM10" serialPort1.BaudRate = 2400 SerialPort1.Parity = IO.Ports.Parity.None SerialPort1.DataBits = 8 SerialPort1.StopBits = IO.Ports.StopBits.One SerialPort1.Handshake = IO.Ports.Handshake.None SerialPort1.RtsEnable = True ' Open the Serial Port SerialPort1.Open() 'Writes data to the Serial Port output buffer If SerialPort1.IsOpen = True Then SerialPort1.Write("MicroCommand") End If End Sub ' Receive data from the Serial Port 'Show received data on UI controls and do something Public Sub DoUpdate() TextBox1.Text = TextBox1.Text & inputData End Sub Private Sub serialPort1_DataReceived(ByVal sender As Object, ByVal e As System.IO.Ports.SerialDataReceivedEventArgs) Handles serialPort1.DataReceived inputData = serialPort1.ReadExisting 'or serialPort1.ReadLine Me.Invoke(New EventHandler(AddressOf DoUpdate)) End Sub End Class

    Read the article

  • What output and recording ports does the Java Sound API find on your computer?

    - by Dave Carpeneto
    Hi all - I'm working with the Java Sound API, and it turns out if I want to adjust recording volumes I need to model the hardware that the OS exposes to Java. Turns out there's a lot of variety in what's presented. Because of this I'm humbly asking that anyone able to help me run the following on their computer and post back the results so that I can get an idea of what's out there. A thanks in advance to anyone that can assist :-) import javax.sound.sampled.*; public class SoundAudit { public static void main(String[] args) { try { System.out.println("OS: "+System.getProperty("os.name")+" "+ System.getProperty("os.version")+"/"+ System.getProperty("os.arch")+"\nJava: "+ System.getProperty("java.version")+" ("+ System.getProperty("java.vendor")+")\n"); for (Mixer.Info thisMixerInfo : AudioSystem.getMixerInfo()) { System.out.println("Mixer: "+thisMixerInfo.getDescription()+ " ["+thisMixerInfo.getName()+"]"); Mixer thisMixer = AudioSystem.getMixer(thisMixerInfo); for (Line.Info thisLineInfo:thisMixer.getSourceLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Source Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}} for (Line.Info thisLineInfo:thisMixer.getTargetLineInfo()) { if (thisLineInfo.getLineClass().getName().equals( "javax.sound.sampled.Port")) { Line thisLine = thisMixer.getLine(thisLineInfo); thisLine.open(); System.out.println(" Target Port: " +thisLineInfo.toString()); for (Control thisControl : thisLine.getControls()) { System.out.println(AnalyzeControl(thisControl));} thisLine.close();}}} } catch (Exception e) {e.printStackTrace();}} public static String AnalyzeControl(Control thisControl) { String type = thisControl.getType().toString(); if (thisControl instanceof BooleanControl) { return " Control: "+type+" (boolean)"; } if (thisControl instanceof CompoundControl) { System.out.println(" Control: "+type+ " (compound - values below)"); String toReturn = ""; for (Control children: ((CompoundControl)thisControl).getMemberControls()) { toReturn+=" "+AnalyzeControl(children)+"\n";} return toReturn.substring(0, toReturn.length()-1);} if (thisControl instanceof EnumControl) { return " Control:"+type+" (enum: "+thisControl.toString()+")";} if (thisControl instanceof FloatControl) { return " Control: "+type+" (float: from "+ ((FloatControl) thisControl).getMinimum()+" to "+ ((FloatControl) thisControl).getMaximum()+")";} return " Control: unknown type";} } All the application does is print out a line about the OS, a line about the JVM, and a few lines about the hardware found that may pertain to recording hardware. For example on my PC at work I get the following: OS: Windows XP 5.1/x86 Java: 1.6.0_07 (Sun Microsystems Inc.) Mixer: Direct Audio Device: DirectSound Playback [Primary Sound Driver] Mixer: Direct Audio Device: DirectSound Playback [SoundMAX HD Audio] Mixer: Direct Audio Device: DirectSound Capture [Primary Sound Capture Driver] Mixer: Direct Audio Device: DirectSound Capture [SoundMAX HD Audio] Mixer: Software mixer and synthesizer [Java Sound Audio Engine] Mixer: Port Mixer [Port SoundMAX HD Audio] Source Port: MICROPHONE source port Control: Microphone (compound - values below) Control: Select (boolean) Control: Microphone Boost (boolean) Control: Front panel microphone (boolean) Control: Volume (float: from 0.0 to 1.0) Source Port: LINE_IN source port Control: Line In (compound - values below) Control: Select (boolean) Control: Volume (float: from 0.0 to 1.0) Control: Balance (float: from -1.0 to 1.0)

    Read the article

  • which ASP.NET hosting site allows listening on different ports than 80 and uses .NET 4?

    - by ijjo
    I'm trying to take advantage of HTML 5 web sockets in .NET and the easiest way appears to be something like what this guy does. I've already tested this myself and it works great, but there are a few problems if I try to deploy this to my hosting site (discountasp.net). Basically, I am not allowed to open up a port on 8080 and listen on it. I then tried to figure out a way to listen on port 80 with IIS as well, but using the HTTPListener, I run into sercurity issues as well. This doesn't seem like it will help since I can't mess with this stuff on the hosting site server either. So to make my life easier, I think I need to find a hosting site that simply allows me to open up a socket on port 8080 and listen on it. Anyone know of one? Or does anyone know of a workaround (besides sniffing all the traffic on port 80)?

    Read the article

  • How can I access UDP ports using a web application on the client PC?

    - by Vaibhav
    One of the thing that current Windows application does is that it writes out information to a hardware device via a UDP message. We are considering porting the application to web-based. I checked Silverlight, and that doesn't allow UDP. We don't want to use ActiveX or Java Applets. What are the other options? Thanks. Update - does anyone know if I can use Flash to do this?

    Read the article

  • Does it make sense to have several UDP ports ready? Will packets be dropped?

    - by Gubatron
    I'm coding a networking application on Android. I'm thinking of having a single UDP port and Datagram socket that receives all the datagrams that are sent to it and then have different processing queues for these messages. I'm doubting if I should have a second or third UDP socket on standby. Some messages will be very short (100bytes or so), but others will have to transfer files. My concern is, will the Android kernel drop the small messages if it's too busy handling the bigger ones?

    Read the article

  • Why can I not have two SocketServers bound to two different ports in the same application?

    - by uriDium
    I am using .Net 3.5 and Windows XP not sure if any more information is needed. I have an application that creates a socket, binds to a port and starts listening. A client comes and connects and then disconnects no problem. It can then reconnect no problem. If I have to sockets each listening on a different (e.g. 50 000 and 55 000) then it will accept the connection but it will not allow a reconnect. I will post source code if needed but I am assuming that it is just something simple that I am not catching.

    Read the article

  • How do I setup JBoss 5.1.0.GA to run multiple instances?

    - by djangofan
    Does anyone have any experience or advice in setting up multiple JBoss 5.1.x instances on the same machine that has 1 network card? Here is what I did: Installed JBoss 5.1.0.GA into c:\myjboss 1.5. I copied the server/default directory to server/ports-01 and server/ports-02 so they have their own config. did I assume correctly? Ran .\run.bat -c ports-01 Ran .\run.bat -c ports-02 At this point there are 2 instances but the second instance doesn't load correctly because of what is probably a few port conflicts. For example: the http port ends up being 8080 for both instances, which it gets from line #49 in the C:\myjboss\server\all\conf\bindingservice.beans\META-INF\bindings-jboss-beans.xml file. Earlier in the server load it clearly gets the value from line#63 in that same file. I don't know why it gets part of the port config from line #49 and the other part from line#63. Confused. I also tried: .\run.bat -Djboss.service.binding.set=ports-01 -c ports-01 and it made little difference. Any ideas on what I am doing wrong?

    Read the article

  • Planning trunk capacity for multiple GbE switches

    - by wuckachucka
    Without measuring throughput (it's at the top of the list; this is just theoretical), I want to know the most standard method for trunking VLANs on multiple Gigabit (GbE) switches to a core Layer 3 GbE switch. Say you have three VLANs: VLAN10 (10.0.0.0/24) Servers: your typical Windows DC/file server, Exchange, and an Accounting/SQL server. VLAN20: (10.0.1.0/24) Sales: needs access to everything on VLAN10; doesn't need access to VLAN30 and vice-versa. VLAN20: (10.0.1.0/24) Support: needs access to everything on VLAN10; doesn't need access to VLAN20 and vice-versa. Here's how I think this should work in my head: Switch #1: Ports 2-20 are assigned to VLAN20; all the Sales workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #1. Switch #2: Ports 2-20 are assigned to VLAN30; all the Support workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #2. Core L3 switch: Ports 2-10 are assigned to VLAN10; all three servers are connected here. With a standard 10/100 x 24 switch, it'll usually come with one or two 1 GbE uplink ports; carrying over this logic to a 10/100/1000 x 24, the "optional" 10 GbE combo ports that most higher-end switches can get shouldn't really be an option. Keep in mind I haven't tested anything yet, I'm primarily moving in this direction for growth (don't want to buy 10/100 switches and have to replace those within a couple of years) and security (being able to control access between VLANs with L3 routing/packet filtering ACLs). Does this sound right? Do I really need the 10 GbE ports? It seems very non-standard and expensive, but it "feels" right when you think about 40 or 50 workstations trunking up to the L3 switch over 1 GbE standard ports. If say 20 workstations want to download a 10 GB image from the servers concurrently, wouldn't the trunk be the bottleneck? At least if the trunk was 10 GbE, you'd have 10x1GbE nodes being able to reach their theoretical max. What about switch stacking? Some of the D-Links I've been looking at have HDMI interfaces for stacking. As far as I know, stacking two switches creates one logical switch, but is this just for management I/O or does the switches use the (assuming it's HDMI 1.3) 10.2 Gbps for carrying data back and forth?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >