Search Results

Search found 10679 results on 428 pages for 'scan disk'.

Page 16/428 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Moving Windows XP from ICH10R RAID 5 to single disk using Linux [migrated]

  - by tudor

  A friend's machine running Windows XP refused to boot recently which is running 3 SATA disks on RAID 5 (which was previously upgraded from RAID 1 not by me). I have determined there to be a disk failure. The disks have been replaced many times in the past few years. I wish to backup the RAID5 partition before I try anything to fix it. The RAID chipset used is ICH10R/DO. So, I plugged in an extra IDE drive and an Ubuntu USB key and looked at the RAID. The partitioning is a mess, but I did find at least one degraded but working RAID array with two partitions, one 79GB and the other 86GB. Then I: 1) Partitioned my IDE disk using fdisk to have a partition of 80GB and bootable, and marked as NTFS. 2) dd the contents of the array to the partition 3) disconnected everything else 4) inserted a Windows XP CD and ran fixboot, fixmbr, and bootcfg. They all run ok and claim that they worked. (e.g. bootcfg detects the Windows partition, fixboot returns saying that it was written correctly.) However, I'm still getting an error like "DISK FAILURE, BOOT DISK NOT FOUND". I have tried running the GRUB rescue disk, which also runs ok, but won't boot into Windows. It just stops with a flashing cursor after chainloader +1, boot. One clue may be that the partitions appear to be wack. One disk has a 79GB RAID partition on a 500GB drive with a offset, the second disk has a 320GB RAID partition across the whole drive. Additionally, the BIOS lists the RAID size as being 149GB. I don't see how this works. How are they even assembling the array when the partitions are so different? I have also tried running the Windows XP automated repair tool, but that didn't work either. I'm presuming this is something simple. Perhaps Windows is attempting to boot into RAID and, upon not finding it, simply crashing? Perhaps the 79GB partitions offset means that it's looking into the disk by that much? Please help!! To clarify: I want to make the single IDE disk bootable with a copy of the array so that I can prove/disprove that it's just that Windows has become corrupted, and use windows tools to correct it before attempting the same thing on the RAID array. That way I have a working backup and can show the process I used to fix it.

  Read the article

• Can't connect disk management to remote XP PC from local Win7/Server 2008

  - by Grez

  Scenario as follows: support technicians using Windows 7 PC's or Server 2008 terminal server are unable to connect Disk Management MMC snap in to a remote PC when the remote device is running Windows XP. "Disk management could not start Virtual Disk Service (VDS) on ". This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall." Connecting from another XP machine or 2003 server to the same XP machines works fine. Even connecting from XP/2003 to the Win7 or 2008 server works fine. Windows firewall disabled on all devices. I'm guessing this is something to do with the fact that XP uses logical disk manager service whereas Win7/2008 use Virtual disk manager service. But there doesn't seem to be any way to use logical disk manager service from 7/2008 to connect to XP...

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• Is it reasonable that a random disk seek & read costs ~16ms?

  - by fzhang

  I am frustrated about the latency of random reading from a non-ssd disk. Based on results from following test program, it speeds ~16 ms for a random read of just 512 bytes without help of os cache. I tried changing 512 to larger values, such as 25k, and the latency did not increase as much. I guess it is because the disk seek dominates the time. I understand that random reading is inherently slow, but just want to be sure that ~16ms is reasonable, even for non-ssd disk. #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <sys/unistd.h> #include <fcntl.h> #include <limits.h> #include <stdio.h> #include <string.h> int main(int argc, char** argv) { int fd = open(argv[1], O_RDONLY); if (fd < 0) { fprintf(stderr, "Failed open %s\n", argv[1]); return -1; } const size_t count = 512; const off_t offset = 25990611 / 2; char buffer[count] = { '\0' }; struct timeval start_time; gettimeofday(&start_time, NULL); off_t ret = lseek(fd, offset, SEEK_SET); if (ret != offset) { perror("lseek error"); close(fd); return -1; } ret = read(fd, buffer, count); if (ret != count) { fprintf(stderr, "Failed reading all: %ld\n", ret); close(fd); return -1; } struct timeval end_time; gettimeofday(&end_time, NULL); printf("tv_sec: %ld, tv_usec: %ld\n", end_time.tv_sec - start_time.tv_sec, end_time.tv_usec - start_time.tv_usec); close(fd); return 0; }

  Read the article

• IOMEGA 500GB hard disk data reccovery

  - by Vineeth

  Last year by November I bought an IOMEGA 500GB Prestige hard disk. Yesterday, unfortunately the hard disk fell down from my table. After that incident, when I connect my disk, Windows asks me to format the disk to use, but I didn't format it yet. Actually, on that hard disk I have about 320GB of data. I tried all my possible ways to access my disk. I tried using DOS. It shows "data error (Cyclic redundancy check)". I have a 3 year warranty. Will I be covered under warranty if I report this issue to IOMEGA? Can I get my data back?

  Read the article

• Solaris disk I/O spike... which monitoring tools do I need?

  - by bonez05

  Hi all, My Solaris 10 websever / database server disk io keeps spiking at intermittent times. Using iostat -xtc 5 the reads / sec will jump from 3.0 to 1450.0 and %busy will jump to 98% The apache access log doesn't indicate anything out of the ordinary. In other words, requests aren't any higher than usual. top doesn't generate anything useful. The cpu usage is fine with mysql using about 20% and nothing else to speak of really. What monitoring tool should I be using to see what process is using excessive disk I/O? or if there are any other suggestions I'm all ears. Thanks

  Read the article

• Volume size doesn't match Disk size after gparted expansion

  - by Cybersylum

  I just expanded a basic disk on a Windows XP VM from 15gb to 40 gb using GPARTED LiveCD (0.5.2-11). I didn't notice anything unusual during the expansion; but after I rebooted back into Windows, the disk capacity doesn't match the disk size as it should (only 1 volume on the disk). The disk shows as 40gb; but the C: volume still shows the original size. I've tried expanding the disk again with GPARTED (no change), and using VMware converter and have it adjust the size of the volume during the process (complains about a lack of space of snapshot error inside the os). The volume has 27% free space so I don't think it is a space issue. Chkdsk doesn't seem to find anything wrong either. The OS seems to run just fine, it doesn't see the additional space however. Any ideas?

  Read the article

• Dell 2950 Perc 6/i "physical disk" and "Enclosure(Backplane)" under Connector 1 in OMSA tree- Troubleshoot help

  - by user66357

  Just looking for someone who might know why this could occur... In OMSA, on my Dell 2950, there usually is only one "Physical Disks" child under "Enclosure (Backplane)" in the tree view. Currently, the tree looks like this: Dell PERC 6/i Integrated Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 removed) Physical Disks (1:33 Ready but unused) Normally it's like this: Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 good) From the front, 6 of 6 3.5" SAS drives are connected. The server is showing Slot 5 as bad and the disk as removed. It seems that the drive in Slot 5 is being sensed as external to the Enclosure. Any ideas why this would happen? Think I can get away with rebuilding the virtual disk by replacing 1:05 with 1:33? Thanks.

  Read the article

• Can I "branch" VirtualBox snapshots (base multiple VM on the same disk image + separate diffs)?

  - by Thilo

  I keep multiple VirtualBoxes for different projects. They are all running the same Debian base system. Keeping complete copies of all the disk images is getting expensive. Is there a way that I can base multiple VM on the same (read-only) disk image, with (hopefully small) diffs layered on top? This is just like snapshots work, except that there is no concept of "current" and "previous", they are more like branches. Or can I just use snapshots (of the "same" VM) for this? I would be wanting to run more than one of those snapshots concurrently.

  Read the article

• Can not boot windows XP from cloned hard disk - what can I do?

  - by Martin

  My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

  Read the article

• grub2 error: out of disk

  - by Carl Smotricz

  I'm trying to make a 250G USB hard disk Ubuntu-bootable on a Compaq nc6220 laptop. I've removed all other disks, so /dev/sda (the USB disk) is the only disk other than CDROM. I installed Ubuntu 9.10 to this disk from the live CD, putting the bootloader on /dev/sda . The default system couldn't be booted, and nothing I did in the Grub menu/cmdline helped. So I chrooted onto the disk and did grub-install /dev/sda. That seemed to work fine, but Grub (1.97 beta 4) keeps coming up with error: out of disk Even when I drop to the command line to do something simple like ls or help, it's always the same error message. Any hints for resolving this, please?

  Read the article

• Windows server detected error with hard disk

  - by user53864

  We have hosting Windows server 2008 R2 and I am working as admin in small company. The server is hanging and restarting as the hard disk seems to be damaged due to power fluctutaion(though having inverter) as it's showing the below error message on server reboot: Problem detected with the hard disk Press any key to continue It's Seagate 1TB SATA hard disk and it's booting after pressing enter. So it's clear that the hard disk is dying. Yes, it's in warranty but it's fact that warranty won't recover the lincesed windows server 2008 and it's data. As it's booting now, I backed up required things and I am thinking to clone the entire hard disk. The first thing it striked me is checking on the Seagate site if any tool available for cloning and I found Seagate DiskWizard but not specified it for windows server 2008. Please anybody could help me giving your best ideas for the below: Urgently, What's the best way(free of cost) for me to clone in my case with the new same sized hard disk? It's a one time lincenced and I cannot use the same key again if I reinstall the server. Will the lincense be carried with new disk if cloned? else there is a way to contact Microsoft explaining the problem occurred, to obtain new key for no charge?. I want to take measure for future. How do I keep two disks in continuous sync? mirrored & raid are the only options converting the disks to dynamic? or is there a best way I could do with no additional charge?. Any help is greatly appreciated. Thank you! EDIT:1 I started cloning the disk with CloneZilla and it was going proper showing in GUI. But after some time there is no GUI but a black screen with some codes(looks like disk location numbers) going page by page(I have attached the screenshots below captured from my phone). Do you people think it's actually cloning?. I started in the morning and it's evening now. I left the office now to let it finish what it's trying to do and I'll go & check it tomorrow. Slowly lost hope, don't know what face it's going to show tomorrow. Any ideas?

  Read the article

• Does installing windows format the hard disk?

  - by Jason

  My Google search for ""does installing windows format the hard disk" returns: No results found for "does installing windows format the hard disk". I was quite surprised. I'm hoping to get a quick answer here. Does an install format the hard disk, and destroy all data, including non-os/s data? -Or do you specifically have to say "format" at some point so you know you are losing everything? [I tried to go to SP3, but it doesn't work on my computer. My SP2 disk is fired. I only have a SP1 disk, with a seperate SP2 package. I can't get to Safe Mode to uninstall SP3 ("Windows XP Setup cann run under Safemode. Setup will restart now.). I don't want running the SP1 disk to destroy any non-o/s data.] Thanks.

  Read the article

• Unable to format/add a partition to Windows XP

  - by sma

  I recently add a 1T disk to an XP machine. I found the disk in the "disk management", I click "initialize" to init it, then creates a primary partition with size 950G, then select quick format to format the disk, the "disk management" will then complains: The disk configuration operation did not complete. Check the system event log for more information on the error. Verify the status of your storage devices before retrying. If that does not solve the problem, close the disk management console, then restart disk management or restart the computer. What could be the reason?

  Read the article

• How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk

  - by The Geek

  We’ve covered loads of different anti-virus, Linux, and other boot disks that help you repair or recover your system, but why limit yourself to just one? Here’s how to combine your favorite repair disks together to create the ultimate repair toolkit for broken Windows systems—all on a single flash drive. The ones we’ve covered already? Here’s a quick list of all the ways you can recover your system with a rescue disk: How to Use the Avira Rescue CD to Clean Your Infected PC How to Use the BitDefender Rescue CD to Clean Your Infected PC How to Use the Kaspersky Rescue Disk to Clean Your Infected PC Change or Reset Windows Password from a Ubuntu Live CD The 10 Cleverest Ways to Use Linux to Fix Your Windows PC Change Your Forgotten Windows Password with the Linux System Rescue CD Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer If you need to clean up an infected system, we’d absolutely recommend the BitDefender CD, since it’s auto-updating. Best bet? Create your ultimate boot disk with as many of the different utilities as your flash drive can hold Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap Serene Blue Ubuntu Wallpaper for Your Desktop Enjoy Old School Style Video Game Fun with Chicken Invaders Hide the Twitter “Litter” in Twitter’s Sidebar Area (Chrome and Iron) Public Domain Day: Reflections on Copyright and the Importance of Public Domain

  Read the article

• no disk space, cant use internet

  - by James

  after trying to install drivers using sudo apt-get update && sudo apt-get upgrade, im faced with a message saying no space left on device, i ran disk usage analyzer as root and there was three folders namely, main volume, home folder, and my 116gb hard drive (which is practically empty) yet both other folders are full, which is stopping me installing drivers because of space, how do i get ubuntu to use this space on my hard drive? its causing problems because i cant gain access to the internet as i cant download drivers when i havnt got enough space, this happens every time i try it sudo fdisk -l Disk /dev/sda: 120.0GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003eeed Device Boot Start End Blocks Id System /dev/sda1 * 2048 231315455 115656704 83 Linux /dev/sda2 231317502 234440703 1561601 5 Extended /dev/sda5 231317504 234440703 1561600 82 Linux swap / solaris Output of df -h df: '/media/ubuntu/FB18-ED76': No such file or directory Filesysytem Size Used Avail Use% Mounted on /cow 751M 751M 0 100% / udev 740M 12K 740M 1% /dev tmpfs 151M 792K 150M 1% /run /dev/sr0 794M 794M 0 100% /cdrom /dev/loop0 758M 758M 0 100% /rofs none 4.0K 0 4.0K 0% /sys/fs/cgroup tmpfs 751M 1.4M 749M 1% /tmp none 5.0M 4.0K 5.0M 1% /run/lock none 751M 276K 751M 1% /run/shm none 100M 40K 100M 1% /run/user

  Read the article

• How to make and restore incremental snapshots of hard disk

  - by brunopereira81

  I use Virtual Box a lot for distro / applications testing purposes. One of the features I simply love about it is virtual machines snapshots, its saves a state of a virtual machine and is able to restore it to its former glory if something you did went wrong without any problems and without consuming your all hard disk space. On my live systems I know how to create a 1:1 image of the file system but all the solutions I'v known will create a new image of the complete file system. Are there any programs / file systems that are capable of taking a snapshot of a current file system, save it on another location but instead of making a complete new image it creates incremental backups? To easy describe what I want, it should be as dd images of a file system, but instead of only a full backup it would also create incremental. I am not looking for clonezilla, etc. It should run within the system itself with no (or almost none) intervention from the user, but contain all the data of the file systems. I am also not looking for a duplicity backup your all system excluding some folders script + dd to save your mbr. I can do that myself, looking for extra finesse. I'm looking for something I can do before doing massive changes to a system and then if something when wrong or I burned my hard disk after spilling coffee on it I can just boot from a liveCD and restore a working snapshot to a hard disk. It does not need to be daily, it doesn't even need a schedule. Just run once in a while and let it its job and preferably RAW based not file copy based.

  Read the article

• New Write Flash SSDs and more disk trays

  - by Steve Tunstall

  In case you haven't heard, the Write SSDs the ZFSSA have been updated. Much faster now for the same price. Sweet. The new write-flash SSDs have a new part number of 7105026 , so make sure you order the right ones. It's important to note that you MUST be on code level 2011.1.4.0 or higher to use these. They have increased in IOPS from 6,000 to 11,000, and increased throughput from 200MB/s to 350MB/s.    Also, you can now add six SAS HBAs (up from 4) to the 7420, allowing one to have three SAS channels with 12 disk trays each, for a new total of 36 disk trays. With 3TB drives, that's 2.5 Petabytes. Is that enough for you? Make sure you add new cards to the correct slots. I've talked about this before, but here is the handy-dandy matrix again so you don't have to go find it. Remember the rules: You can have 6 of any one kind of card (like six 10GigE cards), but you only really get 8 slots, since you have two SAS cards no matter what. If you want more than 12 disk trays, you need two more SAS cards, so think about expansion later, too. In fact, if you are going to have two different speeds of drives, in other words you want to mix 15K speed and 7,200 speed drives in the same system, I would highly recommend two different SAS channels. So I would want four SAS cards in that system, no matter how many trays you have. 

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• Emacs stops taking input when a file has changed on disk [migrated]

  - by recf

  I'm using Emacs v24.3.1 on Windows 8. I had a file change on disk while I had an Emacs buffer open with that file. As soon as I attempt to make a change to the buffer, a message appears in the minibuffer. Fileblah.txt changed on disk; really edit the buffer? (y, n, r or C-h) I would expect to be able to hit r to have it reload the disk version of the file, but nothing happens. Emacs completely stops responding to input. None of the listed keys work, nor do any other keys as far as I can tell. I can't C-g out of the minibuffer. Alt-F4 doesn't work, not does Close window from the task bar. I have to kill the process from task manager. Anyone have any idea what I'm doing wrong here? In cases it's various modes not playing nice with each other, for reference, my init.el is here. Nothing complex. Here's the breakdown: better-defaults (ido-mode, remove menu-bar, uniquify buffer `forward, saveplace) recentf-mode custom frame title visual-line-mode require final newline and delete trailing whitespace on save Markdown mode with auto-mode-alist Flyspell with Aspell backend Powershell mode with auto-mode-alist Ruby auto-mode-alist Puppet mode with auto-mode-alist Feature (Gherkin) mode with auto-mode-alist The specific file was a markdown file with Github-flavored Markdown mode and Flyspell mode enabled.

  Read the article

• recovering raid 0 hard disk

  - by Hiawatha

  I bumped to a huge (for me) problem. I was running dual boot system (win 7 / linux) and at some point I decided to test fedora ( I am new in Linux ). My hard disk conf: 3 hard disks each 1 TB, 2 set to raid 0 with windows running on it and 1 for linux. After installing it from live usb I found out that windows 7 is not in grub anymore and while booting shows raid error. I installed back Ubuntu and ran Disk Utility and checked now I have one disks (raid 0) failed (READ) error. First has 5 bad sectors and second has 1 bad sector. And now I dont know what to do and how to repair. further I dont know which data i could provide to get help. I tried ntfsfix and got this output: Mounting volume... NTFS signature is missing. FAILED Attempting to correct errors... NTFS signature is missing. FAILED Failed to startup volume: Invalid argument NTFS signature is missing. Trying the alternate boot sector Unrecoverable error Volume is corrupt. You should run chkdsk. #sudo ntfs-3g -o force,rw /dev/sdb /media/windows NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

  Read the article

• DelphiTwain how to show form setting

  - by Erwan

  Hi, I'm using Delphitwain (delphitwain.sourceforge.net) to add scan functionality to my app. Everything was fine, when i click scan button on my app it will show scan mode with scanner's Properties such as Page Size, Scanning Side (canon dr-3010c) and there is a Scan button and Cancel button. If i click cancel of course all the properties back to it's value before. How can I show this Scanner's Properties only to change properties without Scan, since i can do scan without showing properties Twain.LoadLibrary; Twain.LoadSourceManager; Twain.Source[CurrentSource].Loaded := TRUE; Twain.Source[CurrentSource].TransferMode := TTwainTransferMode(0); Twain.Source[CurrentSource].EnableSource(True, True); while Twain.Source[CurrentSource].Enabled do Application.ProcessMessages; Twain.UnloadLibrary; Twain.Source[CurrentSource].EnableSource(True, True); The first True for ShowUI and the second True for Modal I know it can be achieved 'cos i've seen another application that can show scanner's properties without scan, only OK and Cancel button, i've searched google all over but no luck, or maybe it just the limitation of the delphitwain component? Thanks, any suggestion appreciated

  Read the article

• BPA scan did not complete for one or more servers

  - by Hossein Aarabi

  In Windows Server 2012 RTM, I am trying to run the BPA. It fails, saying "BPA scan did not complete for one or more servers" Try #1: Try #2: So, I decided to enable the Turn on Script Execution (with Allow all scripts) in Local Group Policy Editor, now I get a very nice exception message :) Clicking on ignore button, BPA logs the following error message: Try #3: So, I decided to go ahead and set the execution policy for all the scopes in PowerShell to unrestricted. Again no luck. What is going on?

  Read the article

• SQL Server 2008 - "Enhanced read-ahead and scan"?

  - by Chris J

  Hi all, Can anyone point me to, or does anyone know what this "feature" of SQL Server is? Googling for it (also for "Super scan" which seems to be a synonym for the feature) reveals no information other than all the edition comparison pages that exist out there for SQL Server. I'm also not sure whether this is a stackoverflow or a serverfault question. I'll try here on serverfault first, but if folk think stackoverflow may be a better forum, drop me a comment to that effect - ta :-)

  Read the article

• How to scan local network (LAN) for connected devices (Mac OS)

  - by smotchkkiss

  I'm basically looking for something like this but available on Mac. I am trying to connect a new workstation to our wireless multifunction printer and I'm having a hell of a time getting the device to spit out an IP for me to connect to. Is there a way I can scan the network somehow? If it makes a difference, the new workstation is using Mac OS X 10.6 Thanks in advance :)

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >