Search Results

Search found 1104 results on 45 pages for 'ti 83'.

Page 16/45 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • Unsure about TRIM enabled on my SSD

    - by user84750
    I have a SSD OCZ Vertex4 installed on my laptop. I'm running Ubuntu 12.04 LTS. I have enable TRIM by adding "discard" to my fstab file. (also added option noatime). I rebooted my Ubuntu and followed These instructions here to test TRIM. The end results of my tempfile was all ffff's, when it should have read all zero's, which is telling me TRIM is not really working or enabled correctly. Did I miss something? Also, will it be a problem if only my /home directory is encrypted. AND if you ask why I have swap on my SSD, it's because I let Ubuntu set up my partition. When I have my SSD, I just wanted to install Ubuntu as fast as possible. =) I've done testing to see at which point it will start to use swap and it took a lot of applications open to finally use swap. I currently have 4 GB of memory. I might shrink this to like 512 MB or 1 GB the most. Here's some info about my file system setup. sudo hdparm -I /dev/sda1 | grep "TRIM supported" Data Set Management TRIM supported (limit 16 blocks) sudo fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda1 * 2048 242016255 121007104 83 Linux /dev/sda2 242018302 250068991 4025345 5 Extended /dev/sda5 242018304 250068991 4025344 82 Linux swap / Solaris ls /dev/mapper control cryptswap1

    Read the article

  • Dual monitor display 12.04?

    - by MrMonty
    I have 2 beautiful 27" asus monitors. I started trying out Ubuntu 12.04 and now only one works and thats vga .. Any help here cause I'm stumped. I have a bfg tech nivida Geforce 8800 gt 512mb and I'm trying to fix this. Getting this error Wen i try to configure the xorg file Failed to set MetaMode (1) 'DFP-0: 1280x1024 @1280x1024 +0+0, DFP-1: 1280x1024 @1280x1024 +1280+0' (Mode 2560x1024, id: 50) on X screen 0. ........................................................................................... This is the xorg.conf ....................................................... nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Removed Option "Xinerama" "1" Removed Option "Xinerama" "0" Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Removed Option "TwinView" "1" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection FILE ^^^^

    Read the article

  • how to setup duel monitors an xorg.conf

    - by MrMonty
    # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

    Read the article

  • Partition does not start on physical sector boundary?

    - by jasmines
    I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

    Read the article

  • Sporadic unspecific kernel panic

    - by koma
    I'm experiencing seldom (so far about once a month) hard crashes on our ubuntu server 10.04 LTS box. The box itself is quite old (Dell PowerEdge 750 from 2004, Pentium4 2.8 GHz). I set up netconsole after it crashed twice last thursday and was able to extract the following output: [ 9354.062473] invalid opcode: 0000 [#1] SMP [ 9354.062516] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/uevent [ 9354.062555] Modules linked in: ppdev adm1026 hwmon_vid i2c_i801 bridge stp dcdbas psmouse serio_raw netconsole configfs shpchp lp parport usbhid hid e1000 [ 9354.062685] [ 9354.062704] Pid: 3988, comm: rsync Not tainted 2.6.38-12-generic-pae #51~lucid1-Ubuntu Dell Computer Corporation PowerEdge 750 /0R1479 [ 9354.062773] EIP: 0060:[<c104fef1>] EFLAGS: 00010046 CPU: 1 [ 9354.062802] EIP is at check_preempt_wakeup+0x181/0x250 [ 9354.062826] EAX: 00000002 EBX: f2a10ccc ECX: 00000000 EDX: 00000002 [ 9354.062850] ESI: f1db71cc EDI: f1db71a0 EBP: f1dbdea8 ESP: f1dbde8c [ 9354.062875] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 9354.062900] Process rsync (pid: 3988, ti=f1dbc000 task=f1db71a0 task.ti=f1dbc000) [ 9354.062933] Stack: [ 9354.062951] 0053ea60 f7907680 f28da840 f2a10ca0 c153ea60 f7907680 c153ea60 f1dbdebc [ 9354.063019] c103f98a f2a10ca0 f7907680 00000001 f1dbdef8 c104f97f 00000000 f2f0bacc [ 9354.063088] f7904338 00000001 00000003 00000000 f2f0bacc 00000001 00000001 00000086 [ 9354.063157] Call Trace: [ 9354.063183] [<c103f98a>] check_preempt_curr+0x6a/0x80 [ 9354.063210] [<c104f97f>] try_to_wake_up+0x5f/0x3f0 [ 9354.063236] [<c1077a00>] ? hrtimer_wakeup+0x0/0x30 [ 9354.063261] [<c104fd64>] wake_up_process+0x14/0x20 [ 9354.063286] [<c1077a1d>] hrtimer_wakeup+0x1d/0x30 [ 9354.063310] [<c1077f4a>] __run_hrtimer+0x7a/0x1c0 [ 9354.063336] [<c107dbad>] ? ktime_get+0x6d/0x110 [ 9354.063360] [<c1078310>] hrtimer_interrupt+0x120/0x2b0 [ 9354.063390] [<c1535c36>] smp_apic_timer_interrupt+0x56/0x8a [ 9354.063418] [<c152f459>] apic_timer_interrupt+0x31/0x38 [ 9354.063446] [<c1520000>] ? mca_attach_bus+0x5/0xc0 [ 9354.063469] Code: 8b 9b 20 01 00 00 8b 86 24 01 00 00 3b 83 24 01 00 00 75 e6 85 db 0f 84 a3 00 00 00 89 da 89 f0 e8 75 f6 fe ff 83 f8 01 0f 85 00 <fe> ff ff 89 f8 e8 95 f9 fe ff 8b 5e 1c 85 db 0f 84 e4 fe ff ff [ 9354.063804] EIP: [<c104fef1>] check_preempt_wakeup+0x181/0x250 SS:ESP 0068:f1dbde8c [ 9354.064231] ---[ end trace 290689cea65aea7f ]--- [ 9354.064290] Kernel panic - not syncing: Fatal exception in interrupt [ 9354.064352] Pid: 3988, comm: rsync Tainted: G D 2.6.38-12-generic-pae #51~lucid1-Ubuntu [ 9354.064424] Call Trace: [ 9354.064481] [<c152c057>] ? panic+0x5c/0x15b [ 9354.064539] [<c15302bd>] ? oops_end+0xcd/0xd0 [ 9354.064539] [<c100d9e4>] ? die+0x54/0x80 [ 9354.064539] [<c152f926>] ? do_trap+0x96/0xc0 [ 9354.064539] [<c100ba00>] ? do_invalid_op+0x0/0xa0 [ 9354.064539] [<c100ba8b>] ? do_invalid_op+0x8b/0xa0 [ 9354.064539] [<c104fef1>] ? check_preempt_wakeup+0x181/0x250 [ 9354.064539] [<c144884d>] ? __kfree_skb+0x3d/0x90 [ 9354.064539] [<c1042ae7>] ? update_curr+0x247/0x2a0 [ 9354.064539] [<c10447bb>] ? update_cfs_load+0x11b/0x2d0 [ 9354.064539] [<c1042a25>] ? update_curr+0x185/0x2a0 [ 9354.064539] [<c152f6bf>] ? error_code+0x67/0x6c [ 9354.064539] [<c104fef1>] ? check_preempt_wakeup+0x181/0x250 [ 9354.064539] [<c103f98a>] ? check_preempt_curr+0x6a/0x80 [ 9354.064539] [<c104f97f>] ? try_to_wake_up+0x5f/0x3f0 [ 9354.064539] [<c1077a00>] ? hrtimer_wakeup+0x0/0x30 [ 9354.064539] [<c104fd64>] ? wake_up_process+0x14/0x20 [ 9354.064539] [<c1077a1d>] ? hrtimer_wakeup+0x1d/0x30 [ 9354.064539] [<c1077f4a>] ? __run_hrtimer+0x7a/0x1c0 [ 9354.064539] [<c107dbad>] ? ktime_get+0x6d/0x110 [ 9354.064539] [<c1078310>] ? hrtimer_interrupt+0x120/0x2b0 [ 9354.064539] [<c1535c36>] ? smp_apic_timer_interrupt+0x56/0x8a [ 9354.064539] [<c152f459>] ? apic_timer_interrupt+0x31/0x38 [ 9354.064539] [<c1520000>] ? mca_attach_bus+0x5/0xc0 Googling for this issue didn't really turn up anything useful (most stuff I found was related to btrfs, but I don't use that, although the module exists and is sometimes loaded). From experience it might have to do with relatively heavy I/O, as two of the panics happened during a backup procedure. Kernel is 2.6.38-12-generic-pae, but I'm pretty sure I also saw panics on 2.6.32. I meanwhile upgraded to 3.0.0-17-generic-pae and am waiting for the next crash ;-) I'm at a loss here, so any pointers where to look for the cause or what it could be would be great :-) Thanks !

    Read the article

  • free -m output, should I be concerend about this servers low memory?

    - by Michael
    This is the output of free -m on a production database (MySQL with machine. 83MB looks pretty bad, but I assume the buffer/cache will be used instead of Swap? [admin@db1 www]$ free -m total used free shared buffers cached Mem: 16053 15970 83 0 122 5343 -/+ buffers/cache: 10504 5549 Swap: 2047 0 2047 top ouptut sorted by memory: top - 10:51:35 up 140 days, 7:58, 1 user, load average: 2.01, 1.47, 1.23 Tasks: 129 total, 1 running, 128 sleeping, 0 stopped, 0 zombie Cpu(s): 6.5%us, 1.2%sy, 0.0%ni, 60.2%id, 31.5%wa, 0.2%hi, 0.5%si, 0.0%st Mem: 16439060k total, 16353940k used, 85120k free, 122056k buffers Swap: 2096472k total, 104k used, 2096368k free, 5461160k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 20757 mysql 15 0 10.2g 9.7g 5440 S 29.0 61.6 28588:24 mysqld 16610 root 15 0 184m 18m 4340 S 0.0 0.1 0:32.89 sysshepd 9394 root 15 0 154m 8336 4244 S 0.0 0.1 0:12.20 snmpd 17481 ntp 15 0 23416 5044 3916 S 0.0 0.0 0:02.32 ntpd 2000 root 5 -10 12652 4464 3184 S 0.0 0.0 0:00.00 iscsid 8768 root 15 0 90164 3376 2644 S 0.0 0.0 0:00.01 sshd

    Read the article

  • Win7 no longer available after installing 12.04

    - by Michael
    I have installed Ubuntu 12.04 but my Windows 7 partition seems to have been lost. It is in sda2. Can anyone help me how to get this Windows 7 partition back without having to reinstall Windows 7? Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd45cd45c Device Boot Start End Blocks Id System /dev/sda1 2048 61433855 30715904 83 Linux /dev/sda2 * 61433856 122873855 30720000 7 HPFS/NTFS/exFAT /dev/sda3 122873856 976769023 426947584 7 HPFS/NTFS/exFAT Disk /dev/sdb: 203.9 GB, 203928109056 bytes 255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x03ee03ee Device Boot Start End Blocks Id System /dev/sdb1 * 63 20482874 10241406 c W95 FAT32 (LBA) /dev/sdb2 20482875 40965749 10241437+ 1c Hidden W95 FAT32 (LBA) /dev/sdb3 40965750 398283479 178658865 f W95 Ext'd (LBA) /dev/sdb5 40965813 76694309 17864248+ 7 HPFS/NTFS/exFAT /dev/sdb6 76694373 108856439 16081033+ 7 HPFS/NTFS/exFAT /dev/sdb7 108856503 398283479 144713488+ 7 HPFS/NTFS/exFAT Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 240 heads, 63 sectors/track, 129201 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000001 Device Boot Start End Blocks Id System /dev/sdc1 * 63 20480543 10240240+ 82 Linux swap / Solaris /dev/sdc2 20480605 1953519119 966519257+ f W95 Ext'd (LBA) /dev/sdc5 20480607 1953519119 966519256+ 7 HPFS/NTFS/exFAT

    Read the article

  • Laptop hot after format [migrated]

    - by Dany Khalife
    I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

    Read the article

  • Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

    - by Lorenzo
    I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • SD Card only mounted after a reboot

    - by evothur
    Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

    Read the article

  • Two domains hosted on the same server with different root folder shows up the same homepage

    - by emaillenin
    I have hosted two domains from GoDaddy at Linode VPS. They are mobiletoast.com and lesseltechnologies.com Thought the latter site has a separate index folder, whenever I navigate to it, I get the homepage of mobiletoast.com The strange thing is, I see the expected page (It works), when I open the site from my mobile phone. But when I open the site from my PC (any browser, without any cache, hard refresh), I get the homepage of mobiletoast.com The Linode support team says, they see the correct "It works" page. But I am not able to see that page. This is the output of the command apache2ctl -S root@li339-83:~# apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost blog.mobiletoast.com (/etc/apache2/sites-enabled/blog.mobiletoast.com:1) port 80 namevhost lesseltechnologies.com (/etc/apache2/sites-enabled/lesseltechnologies.com:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/mobiletoast.com:1) Syntax OK

    Read the article

  • vmware player - ubuntu can resolve hostname but ping fails

    - by recursive_acronym
    Using VMware players on Windows 7 with a Ubuntu 10.04 guest. When I ping it resolves the ip address but the ping fails. Hopefully this is a local issue as I don't have access to any of the network equipment (routers, etc). vmware tools is installed. Is there any other information I can provide to help resolve this? eth0 Link encap:Ethernet HWaddr 00:0c:29:83:4f:c0 inet addr:192.168.163.129 Bcast:192.168.163.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe83:4fc0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:50006 (50.0 KB) TX bytes:16701 (16.7 KB) Interrupt:19 Base address:0x2024 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)

    Read the article

  • DNS for route between WAN & LAN

    - by David Maitland
    I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

    Read the article

  • ubuntu boots only with usb

    - by klimat
    Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

    Read the article

  • Enlarge partition on SD card

    - by chenwj
    I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

    Read the article

  • In Wireshark's Protocol Hierarchy Statistics screen, is the total byte count of a capture the sum of the Bytes column or just the top line (Frame)?

    - by Howiecamp
    Part 1 - I'm looking at Wireshark's Protocol Hierarchy Statistics screen (sample below), is the total byte count of the capture the sum of the Bytes column or just the top line (Frame)? I'm 99% that it's the latter because of protocol rollup but I wanted to conform. Part 2 - From Wireshark documentation on this screen, "Protocol layers can consist of packets that won't contain any higher layer protocol, so the sum of all higher layer packets may not sum up to the protocols packet count. Example: In the screenshot TCP has 85,83% but the sum of the subprotocols (HTTP, ...) is much less. This may be caused by TCP protocol overhead, e.g. TCP ACK packets won't be counted as packets of the higher layer)." Can you explain this?

    Read the article

  • After upgrade to 12.04 wireless keeps dropping on BCM4312

    - by Sheket
    I know there are plenty of questions very similar to these, but I've tried practically everything and it still isn't working. Some solutions get the wireless connection working, but it goes very slow and drops after a few minutes. Then it won't reconnect and keeps asking for password. Hope you can help me. Thanks in advance. This is the output for sudo lshw -C network *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:f0300000-f0303fff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: c0 serial: 00:23:5a:9b:6e:b1 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:f0200000-f023ffff ioport:a000(size=128) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:24:2c:83:f0:81 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-30-generic firmware=478.104 link=no multicast=yes wireless=IEEE 802.11bg And for lsmod | grep b43 b43 342643 0 mac80211 436455 1 b43 cfg80211 178679 2 b43,mac80211 bcma 25651 1 b43 ssb 50691 1 b43 And for rfkill list 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Grub not loading after Windows 8 Install

    - by RazorXsr
    My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

    Read the article

  • Unable to mount location ubuntu 12.10

    - by Rajesh
    I'm new to Ubuntu. I installed Ubuntu 12.10 replacing windows. Now I'm getting Unable to mount location error while opening the drive. $ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=5fa63194-c19e-4117-95c6-679eb6453d3b / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=70f1ec8d-aa45-4de7-a206-747dccd2472b none swap sw 0 0 $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001f10f Device Boot Start End Blocks Id System /dev/sda1 * 2048 970561535 485279744 83 Linux /dev/sda2 970563582 976771071 3103745 5 Extended /dev/sda5 970563584 976771071 3103744 82 Linux swap / Solaris

    Read the article

  • How do I get 12.04 to recognize swap partition so that I can hibernate?

    - by Kayla
    I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

    Read the article

  • Mounting a new hard drive (sda1) to my existing filesystem

    - by shank22
    I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

    Read the article

  • Help With Database Layout

    - by three3
    Hello everyone, I am working on a site similar to Craigslist where users can make postings and sell items in different cities. One difference between my site and Craigslist will be you will be able to search by zip code instead of having all of the cities listed on the page. I already have the ZIP Code database that has all of the city, state, latitude, longitude, and zip code info for each city. Okay, so to dive into what I need done and what I need help with: 1.) Although I have the ZIP Code database, it is not setup perfectly for my use. (I downloaded it off of the internet for free from http://zips.sourceforge.net/) 2.) I need help setting up my database structure (Ex: How many different tables should I use and how should I link them) I will be using PHP and MySQL. These our my thoughts so far on how the database can be setup: (I am not sure if this will work though.) Scenario: Someone goes to the homepage and it will tell them, "Please enter your ZIP Code.". If they enter "17241" for example, this ZIP Code is for a city named Newville located in Pennsylvania. The query would look like this with the current database setup: SELECT city FROM zip_codes WHERE zip = 17241; The result of the query would be "Newville". The problem I see here now is when they want to post something in the Newville section of the site, I will have to have an entire table setup just for the Newville city postings. There are over 42,000 cities which means I would have to have over 42,000 tables (one for each city) so that would be insane to have to do it that way. One way I was thinking of doing it was to add a column to the ZIP Code database called "city_id" which would be a unique number assigned to each city. So for example, the city Newville would have a city_id of 83. So now if someone comes and post a listing in the city Newville I would only need one other table. That one other table would be setup like this: CREATE TABLE postings ( posting_id INT NOT NULL AUTO_INCREMENT, for_sale LONGTEXT NULL, for_sale_date DATETIME NULL, for_sale_city_id INT NULL, jobs LONGTEXT NULL, jobs_date DATETIME NULL, jobs_city_id INT NULL, PRIMARY KEY(posting_id) ); (The for_sale and job_ column names are categories of the types of postings users will be able to list under. There will be many more categories than just those two but this is just for example.) So now when when someone comes to the website and they are looking for something to buy and not sell, they can enter their ZIP Code, 17241, for example, and this is the query that will run: SELECT city, city_id FROM zip_codes WHERE zip = 17241; //Result: Newville 83 (Please note that I will be using PHP to store the ZIP Code the user enters in SESSIONS and Cookies to remember them throughout the site) Now it will tell them, "Please choose your category.". If they choose the category "Items For Sale" then this is the query to run and sort the results: SELECT posting_id, for_sale, for_sale_date FROM postings WHERE for_sale_city_id = $_SESSION['zip_code']; Will this work? So now my question to everyone is will this work? I am pretty sure it will but I do not want to set this thing up and realize I overlooked something and have to start from all over from scratch. Any opinions and ideas are welcomed and I will listen to anyone who has some thoughts. I really appreciate the help in advance :D

    Read the article

  • LinkedIn API returns 'Unauthorized' response (PHP OAuth)

    - by Jim Greenleaf
    I've been struggling with this one for a few days now. I've got a test app set up to connect to LinkedIn via OAuth. I want to be able to update a user's status, but at the moment I'm unable to interact with LinkedIn's API at all. I am able to successfully get a requestToken, then an accessToken, but when I issue a request to the API, I see an 'unauthorized' error that looks something like this: object(OAuthException)#2 (8) { ["message:protected"]=> string(73) "Invalid auth/bad request (got a 401, expected HTTP/1.1 20X or a redirect)" ["string:private"]=> string(0) "" ["code:protected"]=> int(401) ["file:protected"]=> string(47) "/home/pmfeorg/public_html/dev/test/linkedin.php" ["line:protected"]=> int(48) ["trace:private"]=> array(1) { [0]=> array(6) { ["file"]=> string(47) "/home/pmfeorg/public_html/dev/test/linkedin.php" ["line"]=> int(48) ["function"]=> string(5) "fetch" ["class"]=> string(5) "OAuth" ["type"]=> string(2) "->" ["args"]=> array(2) { [0]=> string(35) "http://api.linkedin.com/v1/people/~" [1]=> string(3) "GET" } } } ["lastResponse"]=> string(358) " 401 1276375790558 0000 [unauthorized]. OAU:Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy|48032b2d-bc8c-4744-bb84-4eab53578c11|*01|*01:1276375790:xmc3lWhXJvLSUZh4dxMtrf55VVQ= " ["debugInfo"]=> array(5) { ["sbs"]=> string(329) "GET&http%3A%2F%2Fapi.linkedin.com%2Fv1%2Fpeople%2F~&oauth_consumer_key%3DBhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy%26oauth_nonce%3D7068001084c13f2ee6a2117.22312548%26oauth_signature_method%3DHMAC-SHA1%26oauth_timestamp%3D1276375790%26oauth_token%3D48032b2d-bc8c-4744-bb84-4eab53578c11%26oauth_version%3D1.0" ["headers_sent"]=> string(401) "GET /v1/people/~?GET&oauth_consumer_key=Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy&oauth_signature_method=HMAC-SHA1&oauth_nonce=7068001084c13f2ee6a2117.22312548&oauth_timestamp=1276375790&oauth_version=1.0&oauth_token=48032b2d-bc8c-4744-bb84-4eab53578c11&oauth_signature=xmc3lWhXJvLSUZh4dxMtrf55VVQ%3D HTTP/1.1 User-Agent: PECL-OAuth/1.0-dev Host: api.linkedin.com Accept: */*" ["headers_recv"]=> string(148) "HTTP/1.1 401 Unauthorized Server: Apache-Coyote/1.1 Date: Sat, 12 Jun 2010 20:49:50 GMT Content-Type: text/xml;charset=UTF-8 Content-Length: 358" ["body_recv"]=> string(358) " 401 1276375790558 0000 [unauthorized]. OAU:Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy|48032b2d-bc8c-4744-bb84-4eab53578c11|*01|*01:1276375790:xmc3lWhXJvLSUZh4dxMtrf55VVQ= " ["info"]=> string(216) "About to connect() to api.linkedin.com port 80 (#0) Trying 64.74.98.83... connected Connected to api.linkedin.com (64.74.98.83) port 80 (#0) Connection #0 to host api.linkedin.com left intact Closing connection #0 " } } My code looks like this (based on the FireEagle example from php.net): $req_url = 'https://api.linkedin.com/uas/oauth/requestToken'; $authurl = 'https://www.linkedin.com/uas/oauth/authenticate'; $acc_url = 'https://api.linkedin.com/uas/oauth/accessToken'; $api_url = 'http://api.linkedin.com/v1/people/~'; $callback = 'http://www.pmfe.org/dev/test/linkedin.php'; $conskey = 'Bhgk3fB4cs9t4oatSdv538tD2X68-1OTCBg-KKL3pFBnGgOEhJZhFOf1n9KtHMMy'; $conssec = '####################SECRET KEY#####################'; session_start(); try { $oauth = new OAuth($conskey,$conssec,OAUTH_SIG_METHOD_HMACSHA1,OAUTH_AUTH_TYPE_URI); $oauth->enableDebug(); if(!isset($_GET['oauth_token'])) { $request_token_info = $oauth->getRequestToken($req_url); $_SESSION['secret'] = $request_token_info['oauth_token_secret']; header('Location: '.$authurl.'?oauth_token='.$request_token_info['oauth_token']); exit; } else { $oauth->setToken($_GET['oauth_token'],$_SESSION['secret']); $access_token_info = $oauth->getAccessToken($acc_url); $_SESSION['token'] = $access_token_info['oauth_token']; $_SESSION['secret'] = $access_token_info['oauth_token_secret']; } $oauth->setToken($_SESSION['token'],$_SESSION['secret']); $oauth->fetch($api_url, OAUTH_HTTP_METHOD_GET); $response = $oauth->getLastResponse(); } catch(OAuthException $E) { var_dump($E); } I've successfully set up a connection to Twitter and one to Facebook using OAuth, but LinkedIn keeps eluding me. If anyone could offer some advice or point me in the right direction, I will be extremely appreciative!

    Read the article

  • COMException when trying to use a Library

    - by sarkie
    Hi Guys, I have an ASP.net WebService which uses a Library, this has a dependency on some third party .dlls. If I add a reference to the Library to my webservice, I get a COMException and I can't load the site. I thought it may be to do with aspnet user credentials, so I have tried impersonating and using processModel in machine.config but nothing seems to work. The .dlls are for communicating with hardware so I am not even using them on the server just other parts of the library, is there any way I can fix this? I'm running on Windows XP Pro SP3 with Visual 2008 SP1 and .net 3.5. I am thinking the only way of fixing it, is to split up the library into hardware and non-hardware based. Cheers, Sarkie The specified procedure could not be found. (Exception from HRESULT: 0x8007007F) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The specified procedure could not be found. (Exception from HRESULT: 0x8007007F) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [COMException (0x8007007f): The specified procedure could not be found. (Exception from HRESULT: 0x8007007F)] [FileLoadException: A procedure imported by 'OBIDISC4NETnative, Version=0.0.0.0, Culture=neutral, PublicKeyToken=900ed37a7058e4f2' could not be loaded.] System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +43 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +127 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +142 System.Reflection.Assembly.Load(String assemblyString) +28 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46 [ConfigurationErrorsException: A procedure imported by 'OBIDISC4NETnative, Version=0.0.0.0, Culture=neutral, PublicKeyToken=900ed37a7058e4f2' could not be loaded.] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +613 System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +203 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +105 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +163 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +53 System.Web.Compilation.BuildManager.BatchCompileWebDirectory(VirtualDirectory vdir, VirtualPath virtualDir, Boolean ignoreErrors) +175 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath virtualPath) +83 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +261 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +101 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +83 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath) +10 System.Web.UI.WebServiceParser.GetCompiledType(String inputFile, HttpContext context) +43 System.Web.Services.Protocols.WebServiceHandlerFactory.GetHandler(HttpContext context, String verb, String url, String filePath) +180 System.Web.Script.Services.ScriptHandlerFactory.GetHandler(HttpContext context, String requestType, String url, String pathTranslated) +102 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +193 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +93 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >