Search Results

Search found 10406 results on 417 pages for 'device'.

Page 160/417 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• Unable to mount location ubuntu 12.10

  - by Rajesh

  I'm new to Ubuntu. I installed Ubuntu 12.10 replacing windows. Now I'm getting Unable to mount location error while opening the drive. $ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=5fa63194-c19e-4117-95c6-679eb6453d3b / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=70f1ec8d-aa45-4de7-a206-747dccd2472b none swap sw 0 0 $ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001f10f Device Boot Start End Blocks Id System /dev/sda1 * 2048 970561535 485279744 83 Linux /dev/sda2 970563582 976771071 3103745 5 Extended /dev/sda5 970563584 976771071 3103744 82 Linux swap / Solaris

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• Mounting a new hard drive (sda1) to my existing filesystem

  - by shank22

  I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

  Read the article

• Oracle ADF Mobile

  - by rituchhibber

  We are happy to announce that Oracle ADF Mobile is now available for our customers.Oracle ADF Mobile enables developer to build applications that install and run on both iOS and Android devices from one source code.Development is done with JDeveloper and ADF and leverages Java and HTML5 technologies, while keeping the same visual and declarative approach ADF is known for.Please Click here to read more about the Oracle ADF Mobile release and learn more on our OTN Page. Feature Highlights: Java - Oracle brings a Java VM embedded with each application so you can develop all your business logic in the platform neutral language you know and love! (Yes, even iOS!) JDBC - Since we give you Java, we also provide JDBC along with a SQLite driver and engine that also supports encryption out of the box. Multi-Platform - Truly develop your application only once and deploy to multiple platforms. iOS and Android platforms are supported for both phone and tablet. Flexible - You can decide how to implement the UI: Use existing server-based UI framework like JSF. Use your own favorite HTML5 framework like JQuery. Use our declarative HTML5 component set provided with the framework. Device Feature Access - You can get access to device features from either Java or JavaScript to invoke features like camera, GPS, email, SMS, contacts, etc. Secure - ADF Mobile provides integrated security that works with your server back-end as well. Whether you’re using remote URLs, local HTML or AMX, you can secure any/all of your features with a single consistent login page. Since we also give you SQLite encryption, we are assured that your data is safe. Rapid - Using the same development techniques that ADF developers are already used to, you can quickly create mobile applications without ever learning another language!ADF Mobile XML or AMX for short, provides all the normal input and layout controls you expect and we also add charts/maps/gauges along with it to provide a very comprehensive UI controls. You can also mix and match any of the three for ultimate flexibility!

  Read the article

• How do you traverse and store XML in Blackberry Java app?

  - by Greg

  I'm having a problem accessing the contents of an XML document. My goal is this: Take an XML source and parse it into a fair equivalent of an associative array, then store it as a persistable object. the xml is pretty simple: <root> <element> <category_id>1</category_id> <name>Cars</name> </element> <element> <category_id>2</category_id> <name>Boats</name> </element> </root> Basic java class below. I'm pretty much just calling save(xml) after http response above. Yes, the xml is properly formatted. import java.io.IOException; import java.util.Hashtable; import org.w3c.dom.Document; import org.w3c.dom.Node; import org.w3c.dom.NodeList; import java.util.Vector; import net.rim.device.api.system.PersistentObject; import net.rim.device.api.system.PersistentStore; import net.rim.device.api.xml.parsers.DocumentBuilder; import net.rim.device.api.xml.parsers.DocumentBuilderFactory; public class database{ private static PersistentObject storeVenue; static final long key = 0x2ba5f8081f7ef332L; public Hashtable hashtable; public Vector venue_list; String _node,_element; public database() { storeVenue = PersistentStore.getPersistentObject(key); } public void save(Document xml) { venue_list = new Vector(); storeVenue.setContents(venue_list); Hashtable categories = new Hashtable(); try{ DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory. newInstance(); DocumentBuilder docBuilder = docBuilderFactory.newDocumentBuilder(); docBuilder.isValidating(); xml.getDocumentElement ().normalize (); NodeList list=xml.getElementsByTagName("*"); _node=new String(); _element = new String(); for (int i=0;i<list.getLength();i++){ Node value=list.item(i).getChildNodes().item(0); _node=list.item(i).getNodeName(); _element=value.getNodeValue(); categories.put(_element, _node); } } catch (Exception e){ System.out.println(e.toString()); } venue_list.addElement(categories); storeVenue.commit(); } The code above is the work in progress, and is most likely heavily flawed. However, I have been at this for days now. I can never seem to get all child nodes, or the name / value pair. When I print out the vector as a string, I usually end up with results like this: [{ = root, = element}] and that's it. No "category_id", no "name" Ideally, I would end up with something like [{1 = cars, 2 = boats}] Any help is appreciated. Thanks

  Read the article

• Mobile App Data Syncronization

  - by Matt Rogish

  Let's say I have a mobile app that uses HTML5 SQLite DB (and/or the HTML5 key-value store). Assets (media files, PDFs, etc.) are stored locally on the mobile device. Luckily enough, the mobile device is a read-only copy of the "centralized" storage, so the mobile device won't have to propagate changes upstream. However, as the server changes assets (creates new ones, modifies existing, deletes old ones) I need to propagate those changes back to the mobile app. Assume that server changes are grouped into changesets (version number n) that contain some information (added element XYZ, deleted id = 45, etc.) and that the mobile device has limited CPU/bandwidth, so most of the processing has to take place on the server. I can think of a couple of methods to do this. All have trade-offs and at this point, I'm unsure which is the right course of action... Method 1: For change set n, store the "diff" of the current n and previous n-1. When a client with version y asks if there have been any changes, send the change sets from version y up to the current version. e.g. added item 334, contents: xxx. Deleted picture 44. Deleted PDF 11. Changed 33. added picture 99. Characteristics: Diffs take up space, although in theory would be kept small. However, all diffs must be kept around indefinitely (should a v1 app have not been updated for a year, must apply v2..v100). High latency devices (mobile apps) will incur a penalty to send lots of small files (assume cannot be zipped or tarr'd up into one file) Very few server CPU resources required, as all it does is send the client a list of files "Dumb" - if I change an item in change set 3, and change it to something else in 4, the client is going to perform both actions, even though #3 is rendered moot by #4. Or, if an asset is added in #4 and removed in #5 - the client will download a file just to delete it later. Method 2: Very similar to method 1 except on the server, do some sort of a diff between the change sets represented by the app version and server version. Package that up and send that single change set to the client. Characteristics: Client-efficient: The client only has to process one file, duplicate or irrelevant changes are stripped out. Server CPU/space intensive. The change sets must be diff'd and then written out to a file that is then sent to the client. Makes diff server scalability an issue. Possibly ways to cache the results and re-use them, but in the wild there's likely to be a lot of different versions so the diff re-use has a limit Diff algorithm is complicated. The change sets must be structured in such a way that an efficient and effective diff can be performed. Method 3: Instead of keeping diffs, write out the entire versioned asset collection to a mobile-database import file. When client requests an update, send the entire database to client and have them update their assets appropriately. Characteristics: Conceptually simple -- easy to develop and deploy Very inefficient as the client database is restored every update. If only one new thing was added, the whole database is refreshed. Server space and CPU efficient. Only the latest version DB needs kept around and the server just throws the file to the client. Others?? Thoughts? Thanks!!

  Read the article

• GKTank example is not working.

  - by david

  Hello, I'm trying to get the GKTank example working with 2 iPhones. Both have bluetooth enabled. I start the app on both devices and tap the screen. The Peer Picker comes up and the devices find each other. If I select one device in the list it says "Waiting for {other iPhone}..." forever. On the {other iPhone} the waiting phone gets grayed out. If I select the device to connect to from both devices at the same time both go into waiting state forever... The debug log says this if I select the other iPhone on the debugged device: 2010-05-30 23:20:24.331 GKTank[2433:4e03] handleEvents started (2) 2010-05-30 23:20:25.269 GKTank[2433:4e03] ~ DNSServiceRegister callback: Ref=135f70, Flags=2, ErrorType=0 name=00oRWv-0A..David’s iPhone regtype=_gktank._udp. domain=local. 2010-05-30 23:20:25.375 GKTank[2433:4e03] ~ DNSServiceBrowse callback: Ref=134f30, Flags=2, IFIndex=8 (name=[en2]), ErrorType=0 name=00oRWv-0A..David’s iPhone regtype=_gktank._udp. domain=local. 2010-05-30 23:20:30.691 GKTank[2433:4e03] ~ DNSServiceBrowse callback: Ref=134f30, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=00K83eS0A..iPhone von Tamara regtype=_gktank._udp. domain=local. 2010-05-30 23:20:30.855 GKTank[2433:4e03] ~ DNSServiceQueryRecord callback: Ref=13a320, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=00k83es0a..iphone\032von\032tamara._gktank._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 2010-05-30 23:20:30.872 GKTank[2433:4e03] ** peer 480260628: oldbusy=0, newbusy=0 2010-05-30 23:20:35.215 GKTank[2433:207] ** Stop resolving? potentially previous resolves 2010-05-30 23:20:35.226 GKTank[2433:207] **** BEGIN RESOLVE: 480260628 and it stays that way. On the second iPhone the device is listed as not available and grayed out. If I select each other at the same time it says this: 2010-05-30 23:24:31.416 GKTank[2442:4e03] handleEvents started (2) 2010-05-30 23:24:32.321 GKTank[2442:4e03] ~ DNSServiceRegister callback: Ref=135120, Flags=2, ErrorType=0 name=006JiAZ0A..David’s iPhone regtype=_gktank._udp. domain=local. 2010-05-30 23:24:32.419 GKTank[2442:4e03] ~ DNSServiceBrowse callback: Ref=134f30, Flags=2, IFIndex=8 (name=[en2]), ErrorType=0 name=006JiAZ0A..David’s iPhone regtype=_gktank._udp. domain=local. 2010-05-30 23:24:57.156 GKTank[2442:4e03] ~ DNSServiceBrowse callback: Ref=134f30, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=004_n6C0A..iPhone von Tamara regtype=_gktank._udp. domain=local. 2010-05-30 23:24:57.308 GKTank[2442:4e03] ~ DNSServiceQueryRecord callback: Ref=13a320, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=004_n6c0a..iphone\032von\032tamara._gktank._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 2010-05-30 23:24:57.314 GKTank[2442:4e03] ** peer 203104196: oldbusy=0, newbusy=0 2010-05-30 23:25:02.383 GKTank[2442:207] ** Stop resolving? potentially previous resolves 2010-05-30 23:25:02.425 GKTank[2442:207] **** BEGIN RESOLVE: 203104196 2010-05-30 23:25:13.562 GKTank[2442:4e03] ~ DNSServiceQueryRecord callback: Ref=13a320, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 fullname=004_n6c0a..iphone\032von\032tamara._gktank._udp.local. rrtype=16 rrclass=1 rdlen=18 ttl=7200 2010-05-30 23:25:13.569 GKTank[2442:4e03] ** peer 203104196: oldbusy=0, newbusy=1 2010-05-30 23:25:33.660 GKTank[2442:4e03] ~ DNSServiceBrowse callback: Ref=134f30, Flags=0, IFIndex=-3 (name=[]), ErrorType=0 name=004_n6C0A..iPhone von Tamara regtype=_gktank._udp. domain=local. 2010-05-30 23:25:33.671 GKTank[2442:4e03] Peer [203104196] removed? (0). 2010-05-30 23:25:33.683 GKTank[2442:4e03] GKPeer[139f10] 203104196 service count old=1 new=0 2010-05-30 23:25:37.786 GKTank[2442:4e03] ~ DNSServiceBrowse callback: Ref=134f30, Flags=2, IFIndex=-3 (name=[]), ErrorType=0 name=004_n6C0A..iPhone von Tamara regtype=_gktank._udp. domain=local. 2010-05-30 23:25:37.816 GKTank[2442:4e03] GKPeer[139f10] 203104196 service count old=0 new=1 ... and waits forever. Does anybody know whats wrong with this sample??

  Read the article

• how to pass a variable value from one class to another

  - by Arunabha

  I have two packages one is com.firstBooks.series.db.parser which have a java file XMLParser.java, I have another package com.firstBooks.series79 which have a class called AppMain.NW I want to send the value of a variable called _xmlFileName frm AppMain class to the xmlFile variable in XMLParser class, I am posting the code for both the class, kindly help me. package com.firstBooks.series.db.parser; import java.io.IOException; import java.io.InputStream; import java.util.Vector; import net.rim.device.api.xml.parsers.DocumentBuilder; import net.rim.device.api.xml.parsers.DocumentBuilderFactory; import net.rim.device.api.xml.parsers.ParserConfigurationException; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import org.xml.sax.SAXException; import com.firstBooks.series.db.Question; public class XMLParser { private Document document; public static Vector questionList; public static String xmlFile; public XMLParser() { questionList = new Vector(); } public void parseXMl() throws SAXException, IOException, ParserConfigurationException { // Build a document based on the XML file. DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); InputStream inputStream = getClass().getResourceAsStream(xmlFile); document = builder.parse(inputStream); } public void parseDocument() { Element element = document.getDocumentElement(); NodeList nl = element.getElementsByTagName("question"); if (nl != null && nl.getLength() > 0) { for (int i = 0; i < nl.getLength(); i++) { Element ele = (Element) nl.item(i); Question question = getQuestions(ele); questionList.addElement(question); } } } private Question getQuestions(Element element) { String title = getTextValue(element, "title"); String choice1 = getTextValue(element, "choice1"); String choice2 = getTextValue(element, "choice2"); String choice3 = getTextValue(element, "choice3"); String choice4 = getTextValue(element, "choice4"); String answer = getTextValue(element, "answer"); String rationale = getTextValue(element, "rationale"); Question Questions = new Question(title, choice1, choice2, choice3, choice4, answer, rationale); return Questions; } private String getTextValue(Element ele, String tagName) { String textVal = null; NodeList nl = ele.getElementsByTagName(tagName); if (nl != null && nl.getLength() > 0) { Element el = (Element) nl.item(0); textVal = el.getFirstChild().getNodeValue(); } return textVal; } } Nw the code for AppMain class //#preprocess package com.firstBooks.series79; import net.rim.device.api.ui.UiApplication; import com.firstBooks.series.ui.screens.HomeScreen; public class AppMain extends UiApplication { public static String _xmlFileName; public static boolean _Lite; public static int _totalNumofQuestions; public static void initialize(){ //#ifndef FULL /* //#endif _xmlFileName = "/res/Series79_FULL.xml"; _totalNumofQuestions = 50; _Lite = false; //#ifndef FULL */ //#endif //#ifndef LITE /* //#endif _xmlFileName = "/res/Series79_LITE.xml"; _totalNumofQuestions = 10; _Lite = true; //#ifndef LITE */ //#endif } private AppMain() { initialize(); pushScreen(new HomeScreen()); } public static void main(String args[]) { new AppMain().enterEventDispatcher(); } }

  Read the article

• How to reduce virtual memory by optimising my PHP code?

  - by iCeR

  My current code (see below) uses 147MB of virtual memory! My provider has allocated 100MB by default and the process is killed once run, causing an internal error. The code is utilising curl multi and must be able to loop with more than 150 iterations whilst still minimizing the virtual memory. The code below is only set at 150 iterations and still causes the internal server error. At 90 iterations the issue does not occur. How can I adjust my code to lower the resource use / virtual memory? Thanks! <?php function udate($format, $utimestamp = null) { if ($utimestamp === null) $utimestamp = microtime(true); $timestamp = floor($utimestamp); $milliseconds = round(($utimestamp - $timestamp) * 1000); return date(preg_replace('`(?<!\\\\)u`', $milliseconds, $format), $timestamp); } $url = 'https://www.testdomain.com/'; $curl_arr = array(); $master = curl_multi_init(); for($i=0; $i<150; $i++) { $curl_arr[$i] = curl_init(); curl_setopt($curl_arr[$i], CURLOPT_URL, $url); curl_setopt($curl_arr[$i], CURLOPT_RETURNTRANSFER, 1); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYHOST, FALSE); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYPEER, FALSE); curl_multi_add_handle($master, $curl_arr[$i]); } do { curl_multi_exec($master,$running); } while($running > 0); for($i=0; $i<150; $i++) { $results = curl_multi_getcontent ($curl_arr[$i]); $results = explode("<br>", $results); echo $results[0]; echo "<br>"; echo $results[1]; echo "<br>"; echo udate('H:i:s:u'); echo "<br><br>"; usleep(100000); } ?> Processor Information Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #2 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #3 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #4 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #5 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #6 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #7 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #8 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Memory Information Memory for crash kernel (0x0 to 0x0) notwithin permissible range Memory: 8302344k/9175040k available (2176k kernel code, 80272k reserved, 901k data, 228k init, 7466304k highmem) System Information Linux server3.server.com 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux Physical Disks SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back sd 0:1:0:0: Attached scsi disk sda sd 4:0:0:0: Attached scsi removable disk sdb sd 0:1:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: Attached scsi generic sg7 type 0 Current Memory Usage total used free shared buffers cached Mem: 8306672 7847384 459288 0 487912 6444548 -/+ buffers/cache: 914924 7391748 Swap: 4095992 496 4095496 Total: 12402664 7847880 4554784 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 898G 307G 546G 36% / /dev/sda1 99M 19M 76M 20% /boot none 4.0G 0 4.0G 0% /dev/shm /var/tmpMnt 4.0G 1.8G 2.0G 48% /tmp

  Read the article

• how to pass one variable value frm one class to the oder

  - by Arunabha

  i hav two packages one is com.firstBooks.series.db.parser which hav a java file XMLParser.java,i hav another package com.firstBooks.series79 which hav a class called AppMain.NW i want to send the value of a variable called _xmlFileName frm AppMain class to the xmlFile variable in XMLParser class,i am posting the codes for both the class,kindly help me. package com.firstBooks.series.db.parser; import java.io.IOException; import java.io.InputStream; import java.util.Vector; import net.rim.device.api.xml.parsers.DocumentBuilder; import net.rim.device.api.xml.parsers.DocumentBuilderFactory; import net.rim.device.api.xml.parsers.ParserConfigurationException; import org.w3c.dom.Document; import org.w3c.dom.Element; import org.w3c.dom.NodeList; import org.xml.sax.SAXException; import com.firstBooks.series.db.Question; public class XMLParser { private Document document; public static Vector questionList; public static String xmlFile; public XMLParser() { questionList = new Vector(); } public void parseXMl() throws SAXException, IOException, ParserConfigurationException { // Build a document based on the XML file. DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); InputStream inputStream = getClass().getResourceAsStream(xmlFile); document = builder.parse(inputStream); } public void parseDocument() { Element element = document.getDocumentElement(); NodeList nl = element.getElementsByTagName("question"); if (nl != null && nl.getLength() > 0) { for (int i = 0; i < nl.getLength(); i++) { Element ele = (Element) nl.item(i); Question question = getQuestions(ele); questionList.addElement(question); } } } private Question getQuestions(Element element) { String title = getTextValue(element, "title"); String choice1 = getTextValue(element, "choice1"); String choice2 = getTextValue(element, "choice2"); String choice3 = getTextValue(element, "choice3"); String choice4 = getTextValue(element, "choice4"); String answer = getTextValue(element, "answer"); String rationale = getTextValue(element, "rationale"); Question Questions = new Question(title, choice1, choice2, choice3, choice4, answer, rationale); return Questions; } private String getTextValue(Element ele, String tagName) { String textVal = null; NodeList nl = ele.getElementsByTagName(tagName); if (nl != null && nl.getLength() > 0) { Element el = (Element) nl.item(0); textVal = el.getFirstChild().getNodeValue(); } return textVal; } } Nw the code for AppMain class //#preprocess package com.firstBooks.series79; import net.rim.device.api.ui.UiApplication; import com.firstBooks.series.ui.screens.HomeScreen; public class AppMain extends UiApplication { public static String _xmlFileName; public static boolean _Lite; public static int _totalNumofQuestions; public static void initialize(){ //#ifndef FULL /* //#endif _xmlFileName = "/res/Series79_FULL.xml"; _totalNumofQuestions = 50; _Lite = false; //#ifndef FULL */ //#endif //#ifndef LITE /* //#endif _xmlFileName = "/res/Series79_LITE.xml"; _totalNumofQuestions = 10; _Lite = true; //#ifndef LITE */ //#endif } private AppMain() { initialize(); pushScreen(new HomeScreen()); } public static void main(String args[]) { new AppMain().enterEventDispatcher(); } }

  Read the article

• interactive login on cgi script

  - by raindrop18

  I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; ### set the error fields to nulls $selerror = ""; ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { ### Put the input devices into an array. @devices = param('Switches'); ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } ### This formats the initial Show Web page. print header(-Pragma='no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

  Read the article

• interactive login on perl cgi script- updated question [closed]

  - by raindrop18

  I am new for perl-cgi script. and my objective is to create user/pass interactive script to log and get information from multiple device at once. instead of add the user/pass credential on the script itself. since i am new if some one show me how to write the interactive part of the script. thanks much!!! here is the current code usr/local/bin/perl -wl use CGI ':standard'; use Net::Telnet::Cisco; # ### set the error fields to nulls $selerror = ""; # ### Input from the screen - make sure data was input if (param() and param('Switches') ne "" and (param('Mac') ne "" or param('Interface Description') ne "" or param('VLAN') ne "" )) { # ### Put the input devices into an array. @devices = param('Switches'); # ### format the header data print header(); print start_html(-title=>"ShowSwitches",-BGCOLOR=>'aqua'); print "\n",h1("<CENTER>Show Switches</CENTER>"); print "\n",hr(),"\n"; # ### Go thru the device array. foreach(@devices) { $error_msg = ""; $TAC_login_error = ""; $open_error = ""; $retry_open_error = ""; $prompt_error = ""; $password_error = ""; # ### Take input host and use to send to Telnet $host = $_; $session = Net::Telnet::Cisco->new(Errmode => 'return', Timeout => 30); # ### Connect to the host $session->open(Host =>"$host", Timeout => 15); $open_error = $session->errmsg; # ### Login with TACACS if host can be connected to if ($open_error eq "") { $session->login('USER', 'PASS'); $TAC_login_error = $session->errmsg; # ### Login with TACACS failed - try standard login if ($TAC_login_error ne "") { # ### Connect to host $session->open(Host =>"$host", Timeout => 15); $retry_open_error = $session->errmsg; # ### Wait for password prompt - multiple matches - devices may have different device prompts. if ($retry_open_error eq "") { $session->waitfor(Match => '/Password:.*$/', Match => '/Enter password:.*$/', Timeout => 20); $prompt_error = $session->errmsg; if ($prompt_error eq "") { # ### Input password $session->print('getmeout'); $password_error = $session->errmsg; $session->waitfor('/.*>$/'); $password_error = $session->errmsg; } } } } # ### No errors, then issue "show commands". if ($open_error eq "" and ($TAC_login_error eq "" or $retry_open_error eq "") and $prompt_error eq "" and $password_error eq "") { # ### Show Mac if (param('Mac')) { $cmd = 'sh mac'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } # ### Show Interface Description if (param('Interface Description')) { $cmd = 'sh interface description'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show mac - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } # ### Show VLAN if (param('VLAN')) { $cmd = 'sh vlan'; @output = $session->cmd("$cmd"); $show_error = ""; $show_error = $session->errmsg; print "\n",h2($host . ' - ' . $cmd); if ($show_error ne "") { $error_msg = 'Error for show vlan - ' . $show_error; print b($error_msg),(br); print hr(),"\n"; $error_msg = ''; } else { print pre(@output); print hr(),"\n"; } } } elsif ($TAC_login_error ne "" and $password_error ne "") { $error_msg = "Error - $host " . $TAC_login_error . ' - possible incorrect TACACS or standard password parameters on device.'; } elsif ($open_error ne "") { $error_msg = "Error - $host " . $open_error . ' - cannot connect to host - is it down??'; } elsif ($prompt_error ne "") { $error_msg = "Error - $host " . $prompt_error . ' - password prompt not recognized - invalid TACACS (or user) password.'; } elsif ($password_error ne "") { $error_msg = "Error - $host " . $password_error . ' - possible incorrect user/password parameters on device.'; } if ($error_msg ne "" ) { print b($error_msg),(br); print hr(),"\n"; } print hr(),"\n"; print end_html(),"\n"; } } else { # ### No Show command was selected. if (param('Submit') and param('Mac') eq "" and param('Interface Description') eq "" and param('VLAN') eq "" ) { $selerror = 'No Show Displays were selected. Try again please!!'; } elsif # ### No switch was selected. (param('Submit') and param('Switches') eq "") { $selerror = 'No devices were selected. Try again please!!'; } # ### This formats the initial Show Web page. print header(-Pragma=>'no-cache'), start_html(-title=>"Show Displays",-BGCOLOR=>'aqua'), h1("<CENTER>Show Switches</CENTER>"),hr(), start_form(), b("Select Show Commands:"), br(), br(), checkbox(-name=>'Mac'), checkbox(-name=>'Interface Description'), checkbox(-name=>'VLAN'), br(),br(),hr(),br(), b("Select One or More Devices:"), br(), br(), scrolling_list (-name => 'Switches', -default=> "NONE", -values => ['cs6a', 'cs7a', 'cs7b', 'cs8b', 'cs9a', 'c9b', 'csa' ], -multiple => 'true', -size => 7, ), p(submit('Submit'),reset('Reset')), b($selerror), end_form(),hr(), end_html(); } #

  Read the article

• eclipse error - org.osgi.framework.BundleException: Exception in org.eclipse.core.internal.net.Activator.start()

  - by chaostimmy

  i have the following error message written to the workspace log file... i tried several different Eclipse versions and fresh workspaces... !SESSION 2011-01-11 16:56:49.375 ----------------------------------------------- eclipse.buildId=M20100909-0800 java.version=1.6.0_20 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US Command-line arguments: -os linux -ws gtk -arch x86_64 !ENTRY org.eclipse.osgi 4 0 2011-01-11 16:57:03.820 !MESSAGE An error occurred while automatically activating bundle org.eclipse.core.net (46). !STACK 0 org.osgi.framework.BundleException: Exception in org.eclipse.core.internal.net.Activator.start() of bundle org.eclipse.core.net. at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:806) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:755) at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:370) at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:284) at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:417) at org.eclipse.osgi.internal.loader.BundleLoader.setLazyTrigger(BundleLoader.java:265) at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLazyStarter.java:106) at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java:453) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoader.java:216) at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:393) at org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass(SingleSourcePackage.java:33) at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:466) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:169) at org.eclipse.ui.internal.ide.application.IDEWorkbenchAdvisor.activateProxyService(IDEWorkbenchAdvisor.java:284) at org.eclipse.ui.internal.ide.application.IDEWorkbenchAdvisor.postStartup(IDEWorkbenchAdvisor.java:264) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2575) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) Caused by: java.lang.NoClassDefFoundError: javax/crypto/BadPaddingException at org.eclipse.equinox.internal.security.storage.SecurePreferencesMapper.open(SecurePreferencesMapper.java:99) at org.eclipse.equinox.internal.security.storage.SecurePreferencesMapper.getDefault(SecurePreferencesMapper.java:44) at org.eclipse.equinox.security.storage.SecurePreferencesFactory.getDefault(SecurePreferencesFactory.java:50) at org.eclipse.core.internal.net.ProxyType.getNode(ProxyType.java:515) at org.eclipse.core.internal.net.ProxyType.loadProxyAuth(ProxyType.java:525) at org.eclipse.core.internal.net.ProxyType.createProxyData(ProxyType.java:148) at org.eclipse.core.internal.net.ProxyType.getProxyData(ProxyType.java:137) at org.eclipse.core.internal.net.ProxyManager.migrateInstanceScopePreferences(ProxyManager.java:453) at org.eclipse.core.internal.net.ProxyManager.checkMigrated(ProxyManager.java:418) at org.eclipse.core.internal.net.ProxyManager.initialize(ProxyManager.java:277) at org.eclipse.core.internal.net.Activator.start(Activator.java:179) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:783) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:774) ... 39 more Caused by: java.lang.ClassNotFoundException: javax.crypto.BadPaddingException at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:460) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) ... 53 more Root exception: java.lang.NoClassDefFoundError: javax/crypto/BadPaddingException at org.eclipse.equinox.internal.security.storage.SecurePreferencesMapper.open(SecurePreferencesMapper.java:99) at org.eclipse.equinox.internal.security.storage.SecurePreferencesMapper.getDefault(SecurePreferencesMapper.java:44) at org.eclipse.equinox.security.storage.SecurePreferencesFactory.getDefault(SecurePreferencesFactory.java:50) at org.eclipse.core.internal.net.ProxyType.getNode(ProxyType.java:515) at org.eclipse.core.internal.net.ProxyType.loadProxyAuth(ProxyType.java:525) at org.eclipse.core.internal.net.ProxyType.createProxyData(ProxyType.java:148) at org.eclipse.core.internal.net.ProxyType.getProxyData(ProxyType.java:137) at org.eclipse.core.internal.net.ProxyManager.migrateInstanceScopePreferences(ProxyManager.java:453) at org.eclipse.core.internal.net.ProxyManager.checkMigrated(ProxyManager.java:418) at org.eclipse.core.internal.net.ProxyManager.initialize(ProxyManager.java:277) at org.eclipse.core.internal.net.Activator.start(Activator.java:179) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$1.run(BundleContextImpl.java:783) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextImpl.java:774) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:755) at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:370) at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:284) at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:417) at org.eclipse.osgi.internal.loader.BundleLoader.setLazyTrigger(BundleLoader.java:265) at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLazyStarter.java:106) at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java:453) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoader.java:216) at org.eclipse.osgi.internal.loader.BundleLoader.findLocalClass(BundleLoader.java:393) at org.eclipse.osgi.internal.loader.SingleSourcePackage.loadClass(SingleSourcePackage.java:33) at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:466) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:169) at org.eclipse.ui.internal.ide.application.IDEWorkbenchAdvisor.activateProxyService(IDEWorkbenchAdvisor.java:284) at org.eclipse.ui.internal.ide.application.IDEWorkbenchAdvisor.postStartup(IDEWorkbenchAdvisor.java:264) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2575) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) Caused by: java.lang.ClassNotFoundException: javax.crypto.BadPaddingException at org.eclipse.osgi.internal.loader.BundleLoader.findClassInternal(BundleLoader.java:460) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:422) at org.eclipse.osgi.internal.loader.BundleLoader.findClass(BundleLoader.java:410) at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:107) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) ... 53 more !ENTRY org.eclipse.ui.workbench 4 0 2011-01-11 16:57:03.862 !MESSAGE Widget disposed too early! !STACK 0 java.lang.RuntimeException: Widget disposed too early! at org.eclipse.ui.internal.WorkbenchPartReference$1.widgetDisposed(WorkbenchPartReference.java:172) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:123) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1258) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1282) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1263) at org.eclipse.swt.widgets.Widget.release(Widget.java:1080) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Canvas.releaseChildren(Canvas.java:208) at org.eclipse.swt.widgets.Decorations.releaseChildren(Decorations.java:469) at org.eclipse.swt.widgets.Shell.releaseChildren(Shell.java:2305) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Widget.dispose(Widget.java:462) at org.eclipse.swt.widgets.Shell.dispose(Shell.java:2241) at org.eclipse.swt.widgets.Display.release(Display.java:3211) at org.eclipse.swt.graphics.Device.dispose(Device.java:237) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:131) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) !ENTRY org.eclipse.ui.workbench 4 0 2011-01-11 16:57:03.868 !MESSAGE Widget disposed too early! !STACK 0 java.lang.RuntimeException: Widget disposed too early! at org.eclipse.ui.internal.WorkbenchPartReference$1.widgetDisposed(WorkbenchPartReference.java:172) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:123) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1258) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1282) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1263) at org.eclipse.swt.widgets.Widget.release(Widget.java:1080) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Canvas.releaseChildren(Canvas.java:208) at org.eclipse.swt.widgets.Decorations.releaseChildren(Decorations.java:469) at org.eclipse.swt.widgets.Shell.releaseChildren(Shell.java:2305) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Widget.dispose(Widget.java:462) at org.eclipse.swt.widgets.Shell.dispose(Shell.java:2241) at org.eclipse.swt.widgets.Display.release(Display.java:3211) at org.eclipse.swt.graphics.Device.dispose(Device.java:237) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:131) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) !ENTRY org.eclipse.ui.workbench 4 0 2011-01-11 16:57:03.872 !MESSAGE Widget disposed too early! !STACK 0 java.lang.RuntimeException: Widget disposed too early! at org.eclipse.ui.internal.WorkbenchPartReference$1.widgetDisposed(WorkbenchPartReference.java:172) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:123) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1258) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1282) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1263) at org.eclipse.swt.widgets.Widget.release(Widget.java:1080) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Composite.releaseChildren(Composite.java:1293) at org.eclipse.swt.widgets.Canvas.releaseChildren(Canvas.java:208) at org.eclipse.swt.widgets.Decorations.releaseChildren(Decorations.java:469) at org.eclipse.swt.widgets.Shell.releaseChildren(Shell.java:2305) at org.eclipse.swt.widgets.Widget.release(Widget.java:1083) at org.eclipse.swt.widgets.Control.release(Control.java:3304) at org.eclipse.swt.widgets.Widget.dispose(Widget.java:462) at org.eclipse.swt.widgets.Shell.dispose(Shell.java:2241) at org.eclipse.swt.widgets.Display.release(Display.java:3211) at org.eclipse.swt.graphics.Device.dispose(Device.java:237) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:131) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) !ENTRY org.eclipse.osgi 4 0 2011-01-11 16:57:03.925 !MESSAGE Application error !STACK 1 java.lang.NoClassDefFoundError: An error occurred while automatically activating bundle org.eclipse.core.net (46). at org.eclipse.ui.internal.ide.application.IDEWorkbenchAdvisor.activateProxyService(IDEWorkbenchAdvisor.java:284) at org.eclipse.ui.internal.ide.application.IDEWorkbenchAdvisor.postStartup(IDEWorkbenchAdvisor.java:264) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2575) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574) at org.eclipse.equinox.launcher.Main.run(Main.java:1407) at org.eclipse.equinox.launcher.Main.main(Main.java:1383) i dont know what to do =(

  Read the article

• Windows Phone 7 development: first impressions

  - by DigiMortal

  After hard week in work I got some free time to play with Windows Phone 7 CTP developer tools. Although my first test application is still unfinished I think it is good moment to share my first experiences to you. In this posting I will give you quick overview of Windows Phone 7 developer tools from developer perspective. If you are familiar with Visual Studio 2010 then you will feel comfortable because Windows Phone 7 CTP developer tools base on Visual Studio 2010 Express. Project templates There are five project templates available. Three of them are based on Silverlight and two on XNA Game Studio: Windows Phone Application (Silverlight) Windows Phone List Application (Silverlight) Windows Phone Class Library (Silverlight) Windows Phone Game (XNA Game Studio) Windows Phone Game Library (XNA Game Studio) Currently I am writing to test applications. One of them is based on Windows Phone Application and the other on Windows Phone List Application project template. After creating these projects you see the following views in Visual Studio. Windows Phone Application. Click on image to enlarge. Windows Phone List Application. Click on image to enlarge.  I suggest you to use some of these templates to get started more easily. Windows Phone 7 emulator You can run your Windows Phone 7 applications on Windows Phone 7 emulator that comes with developer tools CTP. If you run your application then emulator is started automatically and you can try out how your application works in phone-like emulator. You can see screenshot of emulator on right. Currently there is opened Windows Phone List Application as it is created by default. Click on image to enlarge it. Emulator is a little bit slow and uncomfortable but it works pretty well. This far I have caused only couple of crashes during my experiments. In these cases emulator works but Visual Studio gets stuck because it cannot communicate with emulator. One important note. Emulator is based on virtual machine although you can see only phone screen and options toolbar. If you want to run emulator you must close all virtual machines running on your machine and run Visual Studio 2010 as administrator. Once you run emulator you can keep it open because you can stop your application in Visual Studio, modify, compile and re-deploy it without restarting emulator. Designing user interfaces You can design user interface of your application in Visual Studio. When you open XAML-files it is displayed in window with two panels. Left panel shows you device screen and works as visual design environment while right panel shows you XAML mark-up and let’s you modify XML if you need it. As it is one of my very first Silverlight applications I felt more comfortable with XAML editor because property names in property boxes of visual designer confused me a little bit. Designer panel is not very good because it is visually hard to follow. It has black background that makes dark borders of controls very hard to see. If you have monitor with very high contrast then it is may be not a real problem. I have usual monitor and I have problem. :) Putting controls on design surface, dragging and resizing them is also pretty painful. Some controls are drawn correctly but for some controls you have to set width and height in XML so they can be resized. After some practicing it is not so annoying anymore. On the right you can see toolbox with some controllers. This is all you get out of the box. But it is sufficient to get started. After getting some experiences you can create your own controls or use existing ones from other vendors or developers. If it is your first time to do stuff with Silverlight then keep Google open – you need it hard. After getting over the first shock you get the point very quickly and start developing at normal speed. :) Writing source code Writing source code is the most familiar part of this action. Good old Visual Studio code editor with all nice features it has. But here you get also some surprises: The anatomy of Silverlight controls is a little bit different than the one of user controls in web and forms projects. Windows Phone 7 doesn’t run on full version of Windows (I bet it is some version of Windows CE or something like this) then there is less system classes you can use. Some familiar classes have less methods that in full version of .NET Framework and in these cases you have to write all the code by yourself or find libraries or source code from somewhere. These problems are really not so much problems than limitations and you get easily over them. Conclusion Windows Phone 7 CTP developer tools help you do a lot of things on Windows Phone 7. Although I expected better performance from tools I think that current performance is not a problem. This far my first test project is going very well and Google has answer for almost every question. Windows Phone 7 is mobile device and therefore it has less hardware resources than desktop computers. This is why toolset is so limited. The more you need memory the more slower is device and as you may guess it needs the more battery. If you are writing apps for mobile devices then make your best to get your application use as few resources as possible and act as fast as possible.

  Read the article

• My Tech Ed North America Preview - Content Edition

  - by Chris Gardner

  As I promised in my last post, I feel the need to give you a rundown on all the technical content I am looking forward to checking out at Tech Ed this year. We shall start with the content I know I'll be able to see. This would be some demo stations in the Technical Learning Center. I will DEFINITELY be checking out the Windows Phone Device Bar. I will admit that I am a bit of a phone snob, and I just want to manhandle all that sexy, sexy tech. I am also planning on talking to the Windows Phone team and the Azure team. Year after year, I end up spending more time in either the TLC or taking certification tests than anywhere else. This leads me to the one "Exam Cram" session I hope to attend. There is a session to cram for 70-599: Designing and Developing Windows Phone Applications. I know this seems odd. I'm (sort of) an XNA guru. However, I'm not that up on my Silverlight. I know enough to add Silverlight to an XNA project. Now, let's talk breakout sessions. We always need to keep track of where we're going. I know, I talk about solving problems over forcing buzz words. However, it is important to know what those buzz words before you tell people not to use them. For this, we will look to the "What's New in Visual Studio 11" and "What's New in Microsoft .NET Framework 4.5." Of course, we do talk bad about buzz words around here. For this, I'm really looking forward to "Visual C#/Visual Basic: Becoming a Guru with Existing Features." I still have .NET 2 tricks that are crucial to my internal libraries. In depth knowledge will NEVER trump shortcut libraries. There is a session in ASP.NET for phones and tablets. For those of you that have not tried to use ASP.NET on a mobile device, there is one thing you really need to understand. Mobile devices don't use scroll bars. That's right; the thing with the least screen real estate doesn't use scroll bars. Thus, I am hoping this session will give some good advice in having an ASP.NET site target both mobile and desktop. The last "business only" session "The Accidental Team Foundation Server Admin." T & W Operations is a VERY small business. As such, I am the TFS admin because I'm the developer that is also the SQL Guru. I keep my server up, but it'd be nice to know some really cool tricks for the part time guy. This leads us the the fun sessions. Coding4Fun has a Kinect session. The Twitter followers will remember that I now have a Kinect for Windows sitting on my desk at work. I have gotten pretty handy with the device, but I KNOW I'm missing some good stuff. Finally, we come to Brian Prince's session on "Making Crazy Money with Games and the Cloud." Never mind the fact that we're using Azure at work. Never mind the fact that I'm actually using the cloud in a game. Never mind the fact that the session has the terms "Crazy Money" and "Games" in the title. If you've never seen Brian Prince speak, you're missing out. In the Hands-on-Labs, we are not allowed to make our own schedule. Instead, we're asked what sessions we can't miss, and they try to schedule around those times. This was the one session I said I couldn't miss. This should complete the technical content for the conference. Coming soon, I'll dig into the certifications I hope to attain. Then, we'll talk about the social activities for the week. Here's a preview of that. I am a member of The Krewe...

  Read the article

• How to Increase the VMWare Boot Screen Delay

  - by Trevor Bekolay

  If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

  Read the article

• doubleTwist is an iTunes Alternative that Supports Several Devices

  - by Mysticgeek

  There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

  Read the article

• Convert a PDF eBook to ePub Format

  - by Matthew Guay

  Would you like to read a PDF eBook on an eReader or mobile device, but aren’t happy with the performance? Here’s how you can convert your PDFs to the popular ePub format so you can easily read them on any device. PDFs are a popular format for eBooks since they render the same on any device and can preserve the exact layout of the print book.  However, this benefit is their major disadvantage on mobile devices, as you often have to zoom and pan back and forth to see everything on the page.  ePub files, on the other hand, are an increasingly popular option. They can reflow to fill your screen instead of sticking to a strict layout style.  With the free Calibre program, you can quickly convert your PDF eBooks to ePub format. Getting Started Download the Calibre installer (link below) for your operating system, and install as normal.  Calibre works on recent versions of Windows, OS X, and Linux.  The Calibre installer is very streamlined, so the install process was quite quick. Calibre is a great application for organizing your eBooks.  It can automatically sort your books by their metadata, and even display their covers in a Coverflow-style viewer. To add an eBook to your library, simply drag-and-drop the file into the Calibre window, or click Add books at the top.  Here you can choose to add all the books from a folder and more. Calibre will then add the book(s) to your library, import the associated metadata, and organize them in the catalog. Convert your Books Once you’ve imported your books into Calibre, it’s time to convert them to the format you want.  Select the book or books you want to convert, and click Convert E-books.  Select whether you want to convert them individually or bulk convert them. The convertor window has lots of options, so you can get your ePub book exactly like you want.  You can simply click Ok and go with the defaults, or you can tweak the settings. Do note that the conversion will only work successfully with PDFs that contain actual text.  Some PDFs are actually images scanned in from the original books; these will appear just like the PDF after the conversion, and won’t be any easier to read. On the first tab, you’ll notice that Calibri will repopulate most of the metadata fields with info from your PDF.  It will also use the first page of the PDF as the cover.  Edit any of the information that may be incorrect, and add any additional information you want associated with the book. If you want to convert your eBook to a different format other than ePub, Calibri’s got you covered, too.  On the top right, you can choose to output the converted eBook into a many different file formats, including the Kindle-friendly MOBI format. One other important settings page is the Structure Detection tab.  Here you can choose to have it remove headers and footers in the converted book, as well as automatically detect chapter breaks. Click Ok when you’ve finished choosing your settings and Calibre will convert the book.  This may take a few minutes, depending on the size of the PDF.  If the conversion seems to be taking too long, you can click Show job details for more information on the progress.   The conversion usually works good, but we did have one job freeze on us.  When we checked the job details, it indicated that the PDF was copy-protected.  Most PDF eBooks, however, worked fine. Now, back in the main Calibri window, select your book and save it to disk.  You can choose to save only the EPUB format, or you can select Save to disk to save all formats of the book to your computer. You can also view the ePub file directly in Calibri’s built-in eBook viewer.  This is the PDF book we converted, and it looks fairly good in the converted format.  It does have some odd line breaks and some misplaced numbers, but on the whole, the converted book is much easier to read, especially on small mobile devices.   Even images get included inline, so you shouldn’t be missing anything from the original eBook. Conclusion Calibri makes it simple to read your eBooks in any format you need. It is a project that is in constant development, and updates regularly adding better stability and features.  Whether you want to ready your PDF eBooks on a Sony Reader, Kindle, netbook or Smartphone, your books will now be more accessible than ever.  And with thousands of free PDF eBooks out there, you’ll be sure to always have something to read. If you’d like some Geeky PDF eBooks, Microsoft Press is offering a number of free PDF eBooks right now.  Check them out at this link (Account Required). Download the Calibre eBook program Similar Articles Productive Geek Tips Format a String as Currency in C#Convert Older Excel Documents to Excel 2007 FormatShare OneNote 2010 Notebooks with OneNote 2007Install an RPM Package on Ubuntu LinuxConvert PDF Files to Word Documents and Other Formats TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

  Read the article

• How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

  - by Chris Hoffman

  Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

  Read the article

• Windows 7 doesn't boot after Ubuntu install

  - by Omu

  I had windows 7 installed on my pc, then I installed Ubuntu 10.10/ During the installation process I have chosen to manually set my partitions: I set a 10GB drive for ubuntu root 1GB drive for swap and for boot drive I've chosen the one used by windows 7 Now I can boot ubuntu, I have the windows 7 option in the boot list, but when I choose Windows 7, it shows me a black screen for a second and returns back to boot screen. Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== = Windows is installed in the MBR of /dev/sda sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Grub 2 Boot sector info: Grub 2 is installed in the boot sector of sda1 and looks at sector 304908237 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sda3: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda4: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 63 62,894,474 62,894,412 7 HPFS/NTFS /dev/sda2 62,894,478 291,579,749 228,685,272 7 HPFS/NTFS /dev/sda3 291,579,811 309,157,937 17,578,127 5 Extended /dev/sda5 291,579,813 309,157,937 17,578,125 83 Linux /dev/sda4 309,159,936 312,580,095 3,420,160 82 Linux swap / Solaris blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 1266BB2766BB0A8D ntfs /dev/sda2 BEDBF1147C76F703 ntfs DATA /dev/sda3: PTTYPE="dos" /dev/sda4 dd38226d-c7c9-4ae5-a726-6d18d34a22e4 swap /dev/sda5 e1dafd1c-f855-406b-8f9a-f9d527c70255 ext4 /dev/sda: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=e1dafd1c-f855-406b-8f9a-f9d527c70255 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set e1dafd1c-f855-406b-8f9a-f9d527c70255 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 1266bb2766bb0a8d chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda5 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda4 during installation UUID=dd38226d-c7c9-4ae5-a726-6d18d34a22e4 none swap sw 0 0 =================== sda5: Location of files loaded by Grub: =================== 156.1GB: boot/grub/core.img 156.3GB: boot/grub/grub.cfg 149.9GB: boot/initrd.img-2.6.35-22-generic 156.3GB: boot/vmlinuz-2.6.35-22-generic 149.9GB: initrd.img 156.3GB: vmlinuz

  Read the article

• Blank screen after installing nvidia restricted driver

  - by LaMinifalda

  I have a new machine with a MSI N560GTX Ti Twin Frozr II/OC graphic card and MSI PH67A-C43 (B3) main board. If i install the current nvidia restricted driver and reboot the machine on Natty (64-bit), then i only get a black screen after reboot and my system does not respond. I can´t see the login screen. On nvidia web page i saw that the current driver is 270.41.06. Is that driver used as current driver? Btw, i am an ubuntu/linux beginner and therefore not very familiar with ubuntu. What can i do to solve the black screen problem? EDIT: Setting the nomodeset parameter does not solve the problem. After ubuntu start, first i see the ubuntu logo, then strange pixels and at the end the black screen. HELP! EDIT2: Thank you, but setting the "video=vesa:off gfxpayload=text" parameters do no solve the problem too. Same result as in last edit. HELP. I would like to see Unity. This is my grub: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="video=vesa:off gfxpayload=text nomodeset quiet splash" GRUB_CMDLINE_LINUX=" vga=794" EDIT3: I dont know if it is important. If this edit is unnecessary and helpless I will delete it. There are some log files (Xorg.0.log - Xorg.4.log). I dont know how these log files relate to each other. Please, check the errors listed below. In Xorg.1.log I see the following error: [ 20.603] (EE) Failed to initialize GLX extension (ComIatible NVIDIA X driver not found) In Xorg.2.log I see the following error: [ 25.971] (II) Loading /usr/lib/xorg/modules/libfb.so [ 25.971] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 25.971] (==) NVIDIA(0): RGB weight 888 [ 25.971] (==) NVIDIA(0): Default visual is TrueColor [ 25.971] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 26.077] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please [ 26.078] (EE) NVIDIA(0): check your system's kernel log for additional error [ 26.078] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the [ 26.078] (EE) NVIDIA(0): README for additional information. [ 26.078] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device! [ 26.078] (II) UnloadModule: "nvidia" [ 26.078] (II) Unloading nvidia [ 26.078] (II) UnloadModule: "wfb" [ 26.078] (II) Unloading wfb [ 26.078] (II) UnloadModule: "fb" [ 26.078] (II) Unloading fb [ 26.078] (EE) Screen(s) found, but none have a usable configuration. [ 26.078] Fatal server error: [ 26.078] no screens found [ 26.078] Please consult the The X.Org Found [...] In Xorg.4.log I see the following errors: [ 15.437] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.437] (==) NVIDIA(0): RGB weight 888 [ 15.437] (==) NVIDIA(0): Default visual is TrueColor [ 15.437] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:1:0:0 (GPU-0) [ 15.703] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.703] (--) NVIDIA(0): VideoBIOS: 70.24.11.00.00 [ 15.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.703] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 15.703] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 560 Ti at [ 15.703] (--) NVIDIA(0): PCI:1:0:0 [ 15.703] (--) NVIDIA(0): none [ 15.706] (EE) NVIDIA(0): No display devices found for this X screen. [ 15.943] (II) UnloadModule: "nvidia" [ 15.943] (II) Unloading nvidia [ 15.943] (II) UnloadModule: "wfb" [ 15.943] (II) Unloading wfb [ 15.943] (II) UnloadModule: "fb" [ 15.943] (II) Unloading fb [ 15.943] (EE) Screen(s) found, but none have a usable configuration. [ 15.943] Fatal server error: [ 15.943] no screens found EDIT4 There was a file /etc/X11/xorg.conf. As fossfreedom suggested I executed sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup However, there is still the black screen after reboot. EDIT5 Neutro's advice (reinstalling the headers) did not solve the problem, too. :-( Any further help is appreciated! EDIT6 I just installed driver 173.xxx. After reboot the system shows me only "Checking battery state". Just for information. I will google the problem, but help is also appreciated! ;-) EDIT7 When using the free driver (Ubuntu says that the free driver is in use and activated), Xorg.0.log shows the following errors: [ 9.267] (II) LoadModule: "nouveau" [ 9.267] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.267] (II) Module nouveau: vendor="X.Org Foundation" [ 9.267] compiled for 1.10.0, module version = 0.0.16 [ 9.267] Module class: X.Org Video Driver [ 9.267] ABI class: X.Org Video Driver, version 10.0 [ 9.267] (II) LoadModule: "nv" [ 9.267] (WW) Warning, couldn't open module nv [ 9.267] (II) UnloadModule: "nv" [ 9.267] (II) Unloading nv [ 9.267] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.267] (II) LoadModule: "vesa" [...] [ 9.399] drmOpenDevice: node name is /dev/dri/card14 [ 9.402] drmOpenDevice: node name is /dev/dri/card15 [ 9.406] (EE) [drm] failed to open device [ 9.406] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 9.406] (WW) Falling back to old probe method for fbdev [ 9.406] (II) Loading sub module "fbdevhw" [ 9.406] (II) LoadModule: "fbdevhw" EDIT8 In the meanwhile i tried to install WIN7 64 bit on my machine. As a result i got a BSOD after installing the nvidia driver. :-) For this reason i sent my new machine back to the hardware reseller. I will inform you as soon as i have a new system. Thank you all for the great help and support. EDIT9 In the meanwhile I have a complete new system with "only" a MSI N460GTX Hawk, but more RAM. The system works perfect. :-) The original N560GTX had a hardware defect. Is is possible to close this question? THX!

  Read the article

• Need help with testdisk output

  - by dan

  I had (note the past tense) an ubuntu 12.04 system with separate partitions for the base and /home directories. It started acting wonky, so I decided to do a reinstall with 12.10, intending just to do a reinstall to the base partition. After several seconds, I realize that the installer was repartitioning the drive and reinstalling, so I pulled the power cord. I'm now trying to recover as much as I can with testdisk, but it seems that testdisk is finding 100 unique partitions when I run it - they mostly tend to be HFS+ or solaris /home (which I think is just an ext4; I've never had solaris on the machine). I've pasted an abbreviated version of the testdisk output below (first ~100 lines, and then ~100 lines from the middle of the output). Is there a way to combine or recreate the partitions and then data recovery, or some other way maximize what I can recover (ideally as much of the file system as possible)? I really only care about what was in the /home directory - I'd rather not use photorec since I don't have another 2 TB HD lying around to recover to. Thanks, Dan Mon Dec 10 06:03:00 2012 Command line: TestDisk TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org OS: Linux, kernel 3.2.34-std312-amd64 (#2 SMP Sat Nov 17 08:06:32 UTC 2012) x86_64 Compiler: GCC 4.4 Compilation date: 2012-11-27T22:44:52 ext2fs lib: 1.42.6, ntfs lib: libntfs-3g, reiserfs lib: 0.3.1-rc8, ewf lib: none /dev/sda: LBA, HPA, LBA48, DCO support /dev/sda: size 3907029168 sectors /dev/sda: user_max 3907029168 sectors /dev/sda: native_max 3907029168 sectors Warning: can't get size for Disk /dev/mapper/control - 0 B - CHS 1 1 1, sector size=512 /dev/sr0 is not an ATA disk Hard disk list Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63, sector size=512 - WDC WD20EARS-00J2GB0, S/N:WD-WCAYY0075071, FW:80.00A80 Disk /dev/sdb - 1013 MB / 967 MiB - CHS 1014 32 61, sector size=512 - Generic Flash Disk, FW:8.07 Disk /dev/sr0 - 367 MB / 350 MiB - CHS 179470 1 1 (RO), sector size=2048 - PLDS DVD+/-RW DH-16AAS, FW:JD12 Partition table type (auto): Intel Disk /dev/sda - 2000 GB / 1863 GiB - WDC WD20EARS-00J2GB0 Partition table type: EFI GPT Analyse Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Bad GPT partition, invalid signature. search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB Results P MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB P Linux Swap 3900755968 3907028975 6273008 SWAP2 version 1, 3211 MB / 3062 MiB interface_write() 1 P MS Data 2048 3900753919 3900751872 2 P Linux Swap 3900755968 3907028975 6273008 search_part() Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 recover_EXT2: s_block_group_nr=0/14880, s_mnt_count=5/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14880, s_mnt_count=0/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 487593984 recover_EXT2: part_size 3900751872 MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB block_group_nr 1 recover_EXT2: "e2fsck -b 32768 -B 4096 device" may be needed recover_EXT2: s_block_group_nr=1/14584, s_mnt_count=0/27, s_blocks_per_group=32768, s_inodes_per_group=8192 recover_EXT2: s_blocksize=4096 recover_EXT2: s_blocks_count 477915164 recover_EXT2: part_size 3823321312 MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB block_group_nr 1 ....snip...... MS Data 2046 3900753917 3900751872 EXT4 Large file Sparse superblock Backup superblock, 1997 GB / 1860 GiB MS Data 2048 3900753919 3900751872 EXT4 Large file Sparse superblock, 1997 GB / 1860 GiB MS Data 4094 3823325405 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 4096 3823325407 3823321312 EXT4 Large file Sparse superblock Backup superblock, 1957 GB / 1823 GiB MS Data 7028840 7033383 4544 FAT12, 2326 KB / 2272 KiB Mac HFS 67856948 67862179 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67862176 67867407 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67862244 67867475 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67867404 67872635 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67867472 67872703 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67872700 67877931 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67937834 67948067 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67938012 67948155 10144 HFS+ found using backup sector!, 5193 KB / 5072 KiB Mac HFS 67948064 67958297 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67948070 67958303 10234 [EasyInstall_OSX] HFS found using backup sector!, 5239 KB / 5117 KiB Mac HFS 67948152 67958295 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958292 67968435 10144 HFS+, 5193 KB / 5072 KiB Mac HFS 67958300 67968533 10234 [EasyInstall_OSX] HFS, 5239 KB / 5117 KiB Mac HFS 67992596 67997827 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 67997824 68003055 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 67997892 68003123 5232 HFS+ found using backup sector!, 2678 KB / 2616 KiB Mac HFS 68003052 68008283 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68003120 68008351 5232 HFS+, 2678 KB / 2616 KiB Mac HFS 68008348 68013579 5232 HFS+, 2678 KB / 2616 KiB Solaris /home 84429840 123499141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84429952 123499253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493136 123562437 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84493248 123562549 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566088 123635389 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84566200 123635501 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571232 123640533 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84571344 123640645 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84659952 123729253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84660064 123729365 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690504 123759805 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84690616 123759917 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700424 123769725 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84700536 123769837 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797720 123867021 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84797832 123867133 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812544 123881845 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84812656 123881957 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824552 123893853 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84824664 123893965 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847528 123916829 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84847640 123916941 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886840 123956141 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84886952 123956253 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945488 124014789 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84945600 124014901 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84957992 124027293 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84958104 124027405 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962240 124031541 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84962352 124031653 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977168 124046469 39069302 UFS1, 20 GB / 18 GiB Solaris /home 84977280 124046581 39069302 UFS1, 20 GB / 18 GiB MS Data 174395467 178483851 4088385 ..... snip (it keeps going on for quite a while)

  Read the article

• JavaOne Latin America Opening Keynotes

  - by Tori Wieldt

  Originally published on blogs.oracle.com/javaone It was a great first day at JavaOne Brazil, which included the Java Strategy and Java Technical keynotes. Henrik Stahl, Senior Director, Product Management for Java opened the keynotes by saying that this is the third year for JavaOne Latin America. He explained, "You know what they say, the first time doesn't count, the second time is a habit and the third time it's a tradition!" He mentioned that he was thrilled that this is largest JavaOne in Brazil to date, and he wants next year to be larger. He said that Oracle knows Latin America is an important hub for development.  "We continually come back to Latin America because of the dedication the community has with driving the continued innovation for Java," he said. Stahl explained that Oracle and the Java community must continue to innovate and Make the Future Java together. The success of Java depends on three important factors: technological innovation, Oracle as a strong steward of Java, and community participation. "The Latin American Java Community (especially in Brazil) is a shining example of how to be positive contributor to Java," Stahl said. Next, George Saab, VP software dev, Java Platform Group at Oracle, discussed some of the recent and upcoming changes to Java. "In addition to the incremental improvements to Java 7, we have also increased the set of platforms supported by Oracle from Linux, Windows, and Solaris to now also include Mac OS X and Linux/ARM for ARM-based PCs such as the Raspberry Pi and emerging ARM based microservers."  Saab announced that EA builds for Linux ARM Hard Float ABI will be available by the end of the year.  Staffan Friberg, Product Manager, Java Platform Group, provided an overview of some of the language coming in Java 8, including Lambda, remove of PermGen, improved data and time APIs and improved security, Java 8 development is moving along. He reminded the audience that they can go to OpenJDK to see this development being done in real-time, and that there are weekly early access builds of OracleJDK 8 that developers can download and try today. Judson Althoff, Senior Vice President, Worldwide Alliances and Channels and Embedded Sales, was invited to the stage, and the audience was told that "even though he is wearing a suit, he is still pretty technical." Althoff started off with a bang: "The Internet of Things is on a collision course with big data and this is a huge opportunity for developers."  For example, Althoff said, today cars are more a data device than a mechanical device. A car embedded with sensors for fuel efficiency, temperature, tire pressure, etc. can generate a petabyte of data A DAY. There are similar examples in healthcare (patient monitoring and privacy requirements creates a complex data problem) and transportation management (sending a package around the world with sensors for humidity, temperature and light). Althoff then brought on stage representatives from three companies that are successful with Java today, first Axel Hansmann, VP Strategy & Marketing Communications, Cinterion. Mr. Hansmann explained that Cinterion, a market leader in Latin America, enables M2M services with Java. At JavaOne San Francisco, Cinterion launched the EHS5, the smallest 3g solderable module, with Java installed on it. This provides Original Equipment Manufacturers (OEMs) with a cost effective, flexible platform for bringing advanced M2M technology to market.Next, Steve Nelson, Director of Marketing for the Americas, at Freescale explained that Freescale is #1 in Embedded Processors in Wired and Wireless Communications, and #1 in Automotive Semiconductors in the Americas. He said that Java provides a mature, proven platform that is uniquely suited to meet the requirements of almost any type of embedded device. He encouraged University students to get involved in the Freescale Cup, a global competition where student teams build, program, and race a model car around a track for speed.Roberto Franco, SBTVD Forum President, SBTVD, talked about Ginga, a Java-based standard for television in Brazil. He said there are 4 million Ginga TV sets in Brazil, and they expect over 20 million TV sets to be sold by the end of 2014. Ginga is also being adopted in other 11 countries in Latin America. Ginga brings interactive services not only at TV set, but also on other devices such as tablets,  PCs or smartphones, as the main or second screen. "Interactive services is already a reality," he said, ' but in a near future, we foresee interactivity enhanced TV content, convergence with OTT services and a big participation from the audience,  all integrated on TV, tablets, smartphones and second screen devices."Before he left the stage, Nandini Ramani thanked Judson for being part of the Java community and invited him to the next Geek Bike Ride in Brazil. She presented him an official geek bike ride jersey.For the Technical Keynote, a "blue screen of death" appeared. With mock concern, Stephin Chin asked the rest of the presenters if they could go on without slides. What followed was a interesting collection of demos, including JavaFX on a tablet, a look at Project Easel in NetBeans, and even Simon Ritter controlling legos with his brainwaves! Stay tuned for more dispatches.

  Read the article

• JavaOne Latin America Opening Keynotes

  - by Tori Wieldt

  It was a great first day at JavaOne Brazil, which included the Java Strategy and Java Technical keynotes. Henrik Stahl, Senior Director, Product Management for Java opened the keynotes by saying that this is the third year for JavaOne Latin America. He explained, "You know what they say, the first time doesn't count, the second time is a habit and the third time it's a tradition!" He mentioned that he was thrilled that this is largest JavaOne in Brazil to date, and he wants next year to be larger. He said that Oracle knows Latin America is an important hub for development.  "We continually come back to Latin America because of the dedication the community has with driving the continued innovation for Java," he said. Stahl explained that Oracle and the Java community must continue to innovate and Make the Future Java together. The success of Java depends on three important factors: technological innovation, Oracle as a strong steward of Java, and community participation. "The Latin American Java Community (especially in Brazil) is a shining example of how to be positive contributor to Java," Stahl said. Next, George Saab, VP software dev, Java Platform Group at Oracle, discussed some of the recent and upcoming changes to Java. "In addition to the incremental improvements to Java 7, we have also increased the set of platforms supported by Oracle from Linux, Windows, and Solaris to now also include Mac OS X and Linux/ARM for ARM-based PCs such as the Raspberry Pi and emerging ARM based microservers."  Saab announced that EA builds for Linux ARM Hard Float ABI will be available by the end of the year.  Staffan Friberg, Product Manager, Java Platform Group, provided an overview of some of the language coming in Java 8, including Lambda, remove of PermGen, improved data and time APIs and improved security, Java 8 development is moving along. He reminded the audience that they can go to OpenJDK to see this development being done in real-time, and that there are weekly early access builds of OracleJDK 8 that developers can download and try today. Judson Althoff, Senior Vice President, Worldwide Alliances and Channels and Embedded Sales, was invited to the stage, and the audience was told that "even though he is wearing a suit, he is still pretty technical." Althoff started off with a bang: "The Internet of Things is on a collision course with big data and this is a huge opportunity for developers."  For example, Althoff said, today cars are more a data device than a mechanical device. A car embedded with sensors for fuel efficiency, temperature, tire pressure, etc. can generate a petabyte of data A DAY. There are similar examples in healthcare (patient monitoring and privacy requirements creates a complex data problem) and transportation management (sending a package around the world with sensors for humidity, temperature and light). Althoff then brought on stage representatives from three companies that are successful with Java today, first Axel Hansmann, VP Strategy & Marketing Communications, Cinterion. Mr. Hansmann explained that Cinterion, a market leader in Latin America, enables M2M services with Java. At JavaOne San Francisco, Cinterion launched the EHS5, the smallest 3g solderable module, with Java installed on it. This provides Original Equipment Manufacturers (OEMs) with a cost effective, flexible platform for bringing advanced M2M technology to market.Next, Steve Nelson, Director of Marketing for the Americas, at Freescale explained that Freescale is #1 in Embedded Processors in Wired and Wireless Communications, and #1 in Automotive Semiconductors in the Americas. He said that Java provides a mature, proven platform that is uniquely suited to meet the requirements of almost any type of embedded device. He encouraged University students to get involved in the Freescale Cup, a global competition where student teams build, program, and race a model car around a track for speed.Roberto Franco, SBTVD Forum President, SBTVD, talked about Ginga, a Java-based standard for television in Brazil. He said there are 4 million Ginga TV sets in Brazil, and they expect over 20 million TV sets to be sold by the end of 2014. Ginga is also being adopted in other 11 countries in Latin America. Ginga brings interactive services not only at TV set, but also on other devices such as tablets,  PCs or smartphones, as the main or second screen. "Interactive services is already a reality," he said, ' but in a near future, we foresee interactivity enhanced TV content, convergence with OTT services and a big participation from the audience,  all integrated on TV, tablets, smartphones and second screen devices."Before he left the stage, Nandini Ramani thanked Judson for being part of the Java community and invited him to the next Geek Bike Ride in Brazil. She presented him an official geek bike ride jersey.For the Technical Keynote, a "blue screen of death" appeared. With mock concern, Stephin Chin asked the rest of the presenters if they could go on without slides. What followed was a interesting collection of demos, including JavaFX on a tablet, a look at Project Easel in NetBeans, and even Simon Ritter controlling legos with his brainwaves! Stay tuned for more dispatches.

  Read the article

• Computer Networks UNISA - Chap 15 &ndash; Network Management

  - by MarkPearl

  After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >