Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 160/792 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • Windows XP Home Edition SP3 cant recognise PCMIA SD Card

    - by Pozo
    System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

    Read the article

  • Can I get the Waves Maxx speaker effects to work in Ubuntu?

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • I can't change audio/volume preferences?

    - by genesis
    When I click to sound icon on the panel, I have 3 options: "Mute all" is gray and could not be clicked Slider - I can slide but it DOESNT change anything Preferences - Shows this (waiting for the response from audio device), but it doesn't show anything for more than a hour This is from aplay -l : root@fb:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog] Subdevices: 1/1 Subdevices #0: subdevice #0 karta 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI] Subdevices: 1/1 Subdevices #0: subdevice #0 root@fb:~# What's wrong?

    Read the article

  • Upgrading 10.04LTS -> 10.10 using custom sources

    - by Boatzart
    I'm trying to upgrade to 10.10 from 10.04 LTS using a custom sources.list file that points to an unofficial mirror*. The mirror does have maverick, but I get the following output when upgrading: boatzart@somecomputer: > sudo do-release-upgrade Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'maverick.tar.gz' authenticate 'maverick.tar.gz' against 'maverick.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Updating repository information WARNING: Failed to read mirror file No valid mirror found While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'lucid' to 'maverick' entries. If you select 'No' the upgrade will cancel. Continue [yN] y WARNING: Failed to read mirror file 96% [Working] Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Here is the relevant section from /var/log/dist-upgrade/main.log: 2010-11-18 14:05:52,117 DEBUG The package 'update-manager-kde' is marked for removal but it's in the removal blacklist 2010-11-18 14:05:52,136 ERROR Dist-upgrade failed: 'The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.' 2010-11-18 14:05:52,136 DEBUG abort called *I'm located inside of USC, and for some crazy reason any sustained downloads to anywhere outside of the University are throttled down to 5kbps inside of my lab. Because of this I need to use the following sources.list: deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-updates main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-backports main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-security main restricted universe multiverse I've tried adding four more entries to the sources.list with s/lucid/maverick/ but that didn't help. Does anyone know how to fix this? Thanks!

    Read the article

  • Windows Phone 8 Music sync

    - by Damian Smilgin
    I've tried to sync my music between my lumia 920 and ubuntu 13.10/14.04. When I copy/paste files into my device nothing happens. My device thinks there is no music at all. When i sync music by rhythmbox my music player see the music, but not album/artists. When I sync by qlix/gmtp there is information about album, album cover but no artist again. How to put music with all mp3 tags on Windows Phone 8 device?

    Read the article

  • Should Exterrnal USB hard drive auto mount Ubuntu 12.04.01 LTS

    - by Chris Good
    I want to have external USB hard drives automatically mounted when plugged in. I have 2 drives exactly the same except for volume label. They both have the same UUID. I want to be easily able to swap them as I'm using them for backups and want to keep 1 at home for off site backup. I've set up the /etc/fstab so they should mount at different places based on their volume label: /etc/fstab : LABEL=Passport1 /media/Passport1 ntfs defaults,windows_names,locale=en_US.utf8 0 0 LABEL=Passport2 /media/Passport2 ntfs defaults,windows_names,locale=en_US.utf8 0 0 blkid shows : ... /dev/sdc1: LABEL="Passport2" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" /dev/sdd1: LABEL="Passport1" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" They both mount automatically during reboot but do not mount when just plugged in to a running system. I've read lots of stuff about this, much of it is old so I'm not sure if it applies. I've read some stuff that says the mounts should happen automatically when plugged in, and lots of other stuff that says you have to install other software to make this happen, although much of it just seems to set up the fstab. What's the real story? Here is /var/log/syslog when drive is plugged in: Dec 14 11:22:58 ausyvutims1 kernel: [66221.300196] usb 1-1: new high-speed USB device number 6 using ehci_hcd Dec 14 11:22:58 ausyvutims1 mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1" Dec 14 11:22:58 ausyvutims1 mtp-probe: bus: 1, device: 6 was not an MTP device Dec 14 11:22:58 ausyvutims1 kernel: [66221.656020] scsi7 : usb-storage 1-1:1.0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.661534] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.666466] scsi 7:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667739] sd 7:0:0:0: Attached scsi generic sg3 type 0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667913] ses 7:0:0:1: Attached Enclosure device Dec 14 11:22:59 ausyvutims1 kernel: [66222.668047] ses 7:0:0:1: Attached scsi generic sg4 type 13 Dec 14 11:22:59 ausyvutims1 kernel: [66222.678473] sd 7:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) Dec 14 11:22:59 ausyvutims1 kernel: [66222.687700] sd 7:0:0:0: [sdc] Write Protect is off Dec 14 11:22:59 ausyvutims1 kernel: [66222.687705] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 Dec 14 11:22:59 ausyvutims1 kernel: [66222.701076] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.701081] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.738062] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.738068] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.754558] sdc: sdc1 Dec 14 11:22:59 ausyvutims1 kernel: [66222.792006] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.792012] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.792016] sd 7:0:0:0: [sdc] Attached SCSI disk Dec 14 11:22:59 ausyvutims1 ata_id[16971]: HDIO_GET_IDENTITY failed for '/dev/sdc': Invalid argument Thanks for any help offered

    Read the article

  • Only One GPU Detected in the Nvidia Quadro NVS 450

    - by Kyle Brandt
    I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

    Read the article

  • How to associate hardware volume control to USB speakers?

    - by Wolfger
    My Xubuntu system recognizes my speakers, and I can change the mixer settings to make them the active sound device, but no matter what I do, the hardware dial will only affect the onboard sound device. generic-usb 0003:046D:0A19.0003: input,hidraw1: USB HID v1.00 Device [ Logitech Logitech Z205 ] on usb-0000:00:1d.1-1/input2 updated to reflect the fact that this was Xubuntu desktop (from Kubuntu install originally) where I had this problem. I was able to easily do this from Ubuntu Natty installation.

    Read the article

  • How do I configure WakeOnUSB properly?

    - by wishi
    How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

    Read the article

  • Cannot read from 2nd SATA data drive connected via SATA docking station

    - by Robbo
    Installed 10.10 this week on dual boot system. Everything else works fine but cannot read from 2nd SATA drive with all my data. Same drive works normally when booted to Windows XP. Interesting part is that I can see the drive in Ubuntu Disk Manager, can read all its attributes, can test it, shows up in Disk Manager, Storage Device Manager and Mount Manager, and can mount it, even change attributes; it appears healthy but does not show up in "Computer" or anywhere else that it can be accessed. The drive is connected via an external e-SATA docking station which is connected to a SATA port on the motherboard.

    Read the article

  • Get Ready for Anytime, Anywhere Engagement

    - by Christie Flanagan
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Are you ready for 2015?  According to IDC, 2015 is the year when more users are projected to access the internet using mobile devices than with PC’s or other wired devices.  It’s no doubt that mobile devices are a critical means of communication today, and are on track to become increasingly more important in the coming years. However, device formats are so varied that delivering a mobile web experience that will engage site visitors and enhance your brand can be a daunting task. Solutions that empower organizations to easily extend their web presence to the mobile channel, while saving significant time and effort in managing mobile sites, are now essential in our ever connected mobile world. So what are some of the things organizations should look for in such a solution? Mobile device form factors, networks, protocols, and browsers vary widely, and reformatting web content for thousands of different device and software combinations is a prohibitive task. An effective mobile solution can make this process seamless by automatically formatting designated web content for mobile delivery.  By automatically detecting a site visitor’s device configuration, the selected web content can be sized and formatted for optimal display on that particular device. This can save tremendous time involved in building, formatting, and maintaining individual websites or mobile applications for different mobile devices. It’s not enough to simply support the thousands of different mobile device types that are out there. It’s also critical to make it easy for marketers and other business users to manage mobile sites and mobile content. Those responsible for maintaining an organization’s web and mobile experiences need the ability to edit content using rich text editor tools and then preview that content directly in the context of the mobile website and the traditional website, ideally from the same business user interface. Powerful capabilities such as these make managing the web experience for mobile devices easy, even with frequently changing content, across a multitude of different devices. This saves tremendous time involved in building, formatting, and maintaining individual websites or mobile applications for different mobile devices. When content or business needs change, the business user needs only to change site content once, and it is seamlessly deployed to the web and all mobile channels.Geo-location is another critical input to making the online experience engaging and relevant for web visitors who are increasingly mobile. A mobile solution should enable use of device GPS data to deliver location-based content and services to mobile website visitors. Organizations can provide mobile site visitors with location-sensitive search results, location-based offers and recommendations, integration of maps and directions into site content, and much more – all critical for meeting the needs of those on the go.To hear more about how mobile is changing the game, check out our recent webcast with Ted Schadler, Vice President, Principal Analyst, Forrester, where he discussed why mobile is the new face of engagement, or learn more about how to extend your web presence to the mobile channel with Oracle WebCenter Sites and Oracle WebCenter Sites Mobility Server.

    Read the article

  • Oracle ADF Mobile Video Series: End-to-End Mobile Application Development Experience

    - by Michelle Kimihira
    Today's video demonstrates how to create an ADF Mobile application and deploy to a device, all within 10 minutes! We will show you the key aspects of how to quickly and declaratively create an on-device mobile application and get it running on an actual device. Additional Information Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

    Read the article

  • File doesn't exist when trying to change permissions following the avasys image scan manual

    - by Howard Graham
    I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

    Read the article

  • thick client migration to web based application

    - by user1151597
    This query is related to application design the technology that I should consider during migration. The Scenario: I have a C#.net Winform application which communicates with a device. One of the main feature of this application is monitoring cyclic data(rate 200ms) sent from the device to the application. The request to start the cyclic data is sent only once in the beginning and then the application starts receiving data from the device until it sends a stop request. Now this same application needs to be deployed over the web in a intranet. The application is composed of a business logic layer and a communication layer which communicates with the device through UDP ports. I am trying to look at a solution which will allow me to have a single instance of the application on the server so that the device thinks that it is connected as usual and then from the business logic layer I can manage the clients. I want to reuse the code of the business layer and the communication layer as much as possible. Please let me know if webserives/WCF/ etc what i should consider to design the migration. Thanks in advance.

    Read the article

  • this error appeared when upgrating 12.04 LTS to 12.10 [closed]

    - by habcity
    Possible Duplicate: How do I fix a “Problem with MergeList” error when trying to do an update? ryder@ryder-Q1500M:~$ do-release-upgrade Checking for a new Ubuntu release Get:1 Upgrade tool signature [198 B] Get:2 Upgrade tool [1,200 kB] Fetched 1,200 kB in 6s (6,988 B/s) authenticate 'quantal.tar.gz' against 'quantal.tar.gz.gpg' extracting 'quantal.tar.gz' [sudo] password for ryder: Reading cache A fatal error occurred Please report this as a bug and include the files /var/log/dist-upgrade/main.log and /var/log/dist-upgrade/apt.log in your report. The upgrade has aborted. Your original sources.list was saved in /etc/apt/sources.list.distUpgrade. Traceback (most recent call last): File "/tmp/update-manager-63XThv/quantal", line 10, in sys.exit(main()) File "/tmp/update-manager-63XThv/DistUpgrade/DistUpgradeMain.py", line 237, in main save_system_state(logdir) File "/tmp/update-manager-63XThv/DistUpgrade/DistUpgradeMain.py", line 130, in save_system_state scrub_sources=True) File "/tmp/update-manager-63XThv/DistUpgrade/apt_clone.py", line 146, in save_state self._write_state_installed_pkgs(sourcedir, tar) File "/tmp/update-manager-63XThv/DistUpgrade/apt_clone.py", line 173, in _write_state_installed_pkgs cache = self._cache_cls(rootdir=sourcedir) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 102, in init self.open(progress) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 145, in open self._cache = apt_pkg.Cache(progress) SystemError: E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_precise-backports_multiverse_i18n_Translation-en, E:The package lists or status file could not be parsed or opened.

    Read the article

  • Threading models when talking to hardware devices

    - by Fuzz
    When writing an interface to hardware over a communication bus, communications timing can sometimes be critical to the operation of a device. As such, it is common for developers to spin up new threads to handle communications. It can also be a terrible idea to have a whole bunch of threads in your system, an in the case that you have multiple hardware devices you may have many many threads that are out of control of the main application. Certainly it can be common to have two threads per device, one for reading and one for writing. I am trying to determine the pros and cons of the two different models I can think of, and would love the help of the Programmers community. Each device instance gets handles it's own threads (or shares a thread for a communication device). A thread may exist for writing, and one for reading. Requested writes to a device from the API are buffered and worked on by the writer thread. The read thread exists in the case of blocking communications, and uses call backs to pass read data to the application. Timing of communications can be handled by the communications thread. Devices aren't given their own threads. Instead read and write requests are queued/buffered. The application then calls a "DoWork" function on the interface and allows all read and writes to take place and fire their callbacks. Timing is handled by the application, and the driver can request to be called at a given specific frequency. Pros for Item 1 include finer grain control of timing at the communication level at the expense of having control of whats going on at the higher level application level (which for a real time system, can be terrible). Pros for Item 2 include better control over the timing of the entire system for the application, at the expense of allowing each driver to handle it's own business. If anyone has experience with these scenarios, I'd love to hear some ideas on the approaches used.

    Read the article

  • Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

    - by Eldian
    I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

    Read the article

  • How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

    - by Paul Swartout
    I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

    Read the article

  • Virtualization in Ubuntu 11.10

    - by Mascarpone
    Since Ubuntu 11.10 use a new kernel, it's very difficult to have a decent support for virtualization. VirtualBox doesn't support guest additions for ubuntu 11.10, so I can't copy to and from my ubuntu desktop and windows, which I absolutely require, plus FreeBSD seems not to be able to use DHCP without guest additions. Virt-manager instead gives an error on launch: Unable to open a connection to the libvirt management daemon. Libvirt URI is: qemu:///system Verify that: - The 'libvirt-bin' package is installed - The 'libvirtd' daemon has been started - You are member of the 'libvirtd' group unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/connection.py", line 1146, in _open_thread self.vmm = self._try_open() File "/usr/share/virt-manager/virtManager/connection.py", line 1130, in _try_open flags) File "/usr/lib/python2.7/dist-packages/libvirt.py", line 102, in openAuth if ret is None:raise libvirtError('virConnectOpenAuth() failed') libvirtError: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Permission denied The problem is solved by running virt-manager as root, but I don't like that. How do I change permissions to run Virt-Manager as user? Is there a way to install guest additions on Ubuntu 11.10?

    Read the article

  • Sonicwall site-to-site can not access remote network

    - by vpnwizard
    I have 2 SonicWall devices (tz100) in 2 different geographical locations. They are connected to each other using site-to-site vpn connection and this works just great. Device A network - 192.168.1.0/24 Device B network - 192.168.2.0/24 When I connect to one device, I can access, from my computer, anything on that specific subnet. However, I am unable to view anything, from my computer, on the other network. Is there a setting somewhere that will forward my requests to the other subnet? Example - I VPN into Device A, but would like to get to a server which is on the Device B network (192.168.2.0/24)

    Read the article

  • Rendering transparent textures in directX

    - by Vibhore Tanwer
    I am working with a directX application with WPF, I am facing a problem with videos and images that contains transparent pixels, I have to draw a color in background an then a video/image over it. What I expect is background color should be visible while playing video only non transparent pixels should be visible but what I get is a black background behind the video. I am using following settings on device to achieve alpha blending : device.RenderState.SourceBlend = Blend.SourceAlpha; device.RenderState.DestinationBlend = Blend.InvSourceAlpha; device.RenderState.AlphaBlendEnable = true; What am I missing here? What is the best approach to handle transparent videos? Any help will be of great value to me.

    Read the article

  • 12 Steps to NTFS Shared Folders in Windows Server 2012

    - by KeithMayer
    In the past, managing and sharing NTFS folders could be a real ordeal – there were different tools for managing NTFS permissions vs shared folders and most IT Pros generally used these tools on a server-by-server basis from each server’s console. Server Manager to the rescue! In Windows Server 2012, Server Manager provides a management facelift on top of the disconnected process that we’ve used in the past for sharing folders and setting NTFS permissions. In addition, Server Manager can

    Read the article

  • How can I set deadline as the I/O scheduler for USB Flash devices by using udev rules?

    - by ????
    I have set CFQ as the default I/O scheduler. I often get bad performance when I write data into a Flash device. This is resolved if I use deadline as the I/O scheduler for USB Flash devices. I can't always change the scheduler manually, right? I think writing udev rules is a good idea. Can someone please write rules for me? I want: When I plug in a USB device, detect the type of the device. If it is a portable USB hard disk, do nothing (I think if a device has more than one partitions, it always a portable hard disk. If it is a USB Flash device, set deadline as it's scheduler.

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >