Search Results

Search found 5618 results on 225 pages for 'recursive dns'.

Page 160/225 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • Windows 2008 R2 DHCP server not responding to DHCP discover

    - by MartinSteel
    I've got two Windows 2008 Enterprise R2 servers both running DNS and DHCP called cod & lobster. DHCP is setup using the split scope option introduced with 2008 R2, whereby both servers should respond with the first response providing the lease. Setup is as follows: Cod - IP: 192.168.0.231 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 160-179. - Response Delay: 0ms - Authorised in Active Directory (Re-authorised to confirm) - Windows firewall disabled while testing Lobster - IP: 192.168.0.232 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 101-159. - Response Delay: 1000ms - Authorised in Active Directory All DHCP leases to clients are currently being issues by Lobster rather than Cod. Packet captures with Wireshark show the following (all to broadcast address): Client - DHCP Discover Lobster - DHCP Offer (after 1s delay) Client - DHCP Request Lobster - DHCP Ack Client - DHCP Inform From my setup with two servers I'd expect to see a DHCP Offer coming from Cod almost immediately after the DHCP Discover. Does anybody have any idea what would prevent the DHCP Server responding to the discover?

    Read the article

  • Dual NIC Networking CentOS 5.3 (losing connection)

    - by Toymakerii
    I have a CentOS System with two NICs on it. One is Ethernet the other is Wireless. The Ethernet has an address of 192.168.1.110 and is tied to a LAN. (The LAN provides DHCP and DNS for its domain of 192.168.1.*) The Wireless card should have an address of 131.238.. and is tied to the WAN. For some evil reason, I can get the WAN to work for a short amount of time then it suddenly dies. I have to turn on/off the connection to get it to work again. Any suggestions?

    Read the article

  • mexTcpBinding in WCF - IMetadataExchange errors

    - by David
    I'm wanting to get a WCF-over-TCP service working. I was having some problems with modifying my own project, so I thought I'd start with the "base" WCF template included in VS2008. Here is the initial WCF App.config and when I run the service the WCF Test Client can work with it fine: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" /> </system.web> <system.serviceModel> <services> <service name="WcfTcpTest.Service1" behaviorConfiguration="WcfTcpTest.Service1Behavior"> <host> <baseAddresses> <add baseAddress="http://localhost:8731/Design_Time_Addresses/WcfTcpTest/Service1/" /> </baseAddresses> </host> <endpoint address="" binding="wsHttpBinding" contract="WcfTcpTest.IService1"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="WcfTcpTest.Service1Behavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> This works perfectly, no issues at all. I figured changing it from HTTP to TCP would be trivial: change the bindings to their TCP equivalents and remove the httpGetEnabled serviceMetadata element: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" /> </system.web> <system.serviceModel> <services> <service name="WcfTcpTest.Service1" behaviorConfiguration="WcfTcpTest.Service1Behavior"> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1337/Service1/" /> </baseAddresses> </host> <endpoint address="" binding="netTcpBinding" contract="WcfTcpTest.IService1"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexTcpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="WcfTcpTest.Service1Behavior"> <serviceDebug includeExceptionDetailInFaults="True" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> But when I run this I get this error in the WCF Service Host: System.InvalidOperationException: The contract name 'IMetadataExchange' could not be found in the list of contracts implemented by the service Service1. Add a ServiceMetadataBehavior to the configuration file or to the ServiceHost directly to enable support for this contract. I get the feeling that you can't send metadata using TCP, but that's the case why is there a mexTcpBinding option?

    Read the article

  • Mac OS X bypass proxy for certain domains

    - by Brian
    In college I'm behind a proxy. When I try to visit one of my local Apache virtual hosts behind the proxy, then my college DNS attempts to resolve the host, thus bypassing my local host file. In the advanced setting for proxies you seem to be able to enter values into "Bypass proxy settings for these Hosts & Domains". I added the last 2 to the end - "*.local, 169.254/16, *.dev, *.sb". But it doesn't work. Is there a solution?

    Read the article

  • Stumped by "The remote server returned an error: (403) Forbidden" with WCF Service in https

    - by RJ
    I have a WCF Service that I have boiled down to next to nothing because of this error. It is driving me up the wall. Here's what I have now. A very simple WCF service with one method that returns a string with the value, "test". A very simple Web app that uses the service and puts the value of the string into a label. A web server running IIS 6 on Win 2003 with a SSL certificate. Other WCF services on the same server that work. I publish the WCF service to it's https location I run the web app in debug mode in VS and it works perfectly. I publish the web app to it's https location on the same server the WCF service resides under the same SSL certificate I get, "The remote server returned an error: (403) Forbidden" I have changed almost every setting in IIS as well as the WCF and Web apps to no avail. I have compared setting in the WCF services that work and everything is the same. Below are the setting in the web.config for the WCF Service and the WEB app: It appears the problem has to do with the Web app but I am out of ideas. Any ideas: WCF Service: <system.serviceModel> <bindings> <client /> <services> <service behaviorConfiguration="Ucf.Smtp.Wcf.SmtpServiceBehavior" name="Ucf.Smtp.Wcf.SmtpService"> <host> <baseAddresses> <add baseAddress="https://test.net.ucf.edu/webservices/Smtp/" /> </baseAddresses> </host> <endpoint address="" binding="wsHttpBinding" contract="Ucf.Smtp.Wcf.ISmtpService" bindingConfiguration="SSLBinding"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Ucf.Smtp.Wcf.SmtpServiceBehavior"> <serviceMetadata httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" httpsHelpPageEnabled="True"/> </behavior> </serviceBehaviors> </behaviors> Web App: <system.serviceModel> <bindings><wsHttpBinding> <binding name="WSHttpBinding_ISmtpService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> <client> <endpoint address="https://net228.net.ucf.edu/webservices/smtp/SmtpService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_ISmtpService" contract="SmtpService.ISmtpService" name="WSHttpBinding_ISmtpService"> <identity> <dns value="localhost" /> </identity> </client> </system.serviceModel>

    Read the article

  • Move exchange mailboxes cross forest

    - by Aceth
    Having a hard time migrating user mailboxes across 2 forests. I've set up ADMT 3.2, No dns issues and fully route-able between the domains etc. Have come to migrate user mailboxes and the exchange shell just comes back with ... [PS] C:New-MoveRequest -Identity "username" -TargetDatabase "maildb" -RemoteGlobalCatalog 'gdc.doman.local' -RemoteCredential (get-credential) -TargetDeliveryDomain 'sourcedomain.local' Parameter set cannot be resolved using the specified named parameters. + CategoryInfo : InvalidArgument: (:) [New-MoveRequest], ParameterBindingException + FullyQualifiedErrorId : AmbiguousParameterSet,New-MoveRequest We are running a mixed environment (windows server 2003 and up with exchange 2003 and exchange 2010 (different servers obviously)) as a source domain and full Server 2008 R2 servers in the target domain with only 1 exchange 2010 server. We have ran this command on the Exchange 2010 server on the target domain and when asked giving the credentials of an admin in source domain in the format : sourcedomain\source_administrator Any help would be greatly appreciated Thanks Rhys

    Read the article

  • Why is Postfix trying to connect to other machines SMTP port 25?

    - by TryTryAgain
    Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.101]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.101]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:25 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3085]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3086]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Jul 5 11:09:30 relay postfix/smtp[3086]: connect to ab.xyz.com[10.41.0.102]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3087]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3084]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3088]: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out Jul 5 11:09:55 relay postfix/smtp[3087]: connect to ab.xyz.com[10.41.0.135]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3084]: connect to ab.xyz.com[10.41.0.110]:25: Connection refused Jul 5 11:09:55 relay postfix/smtp[3088]: connect to ab.xyz.com[10.41.0.247]:25: Connection refused Is this a DNS thing, doubtful as I've changed from our local DNS to Google's..still Postfix will occasionally try and connect to ab.xyz.com from a variety of addresses that may or may not have port 25 open and act as mail servers to begin with. Why is Postfix attempting to connect to other machines as seen in the log? Mail is being sent properly, other than that, it appears all is good. Occasionally I'll also see: relay postfix/error[3090]: 3F1AB42132: to=, relay=none, delay=32754, delays=32724/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.102]:25: Connection refused) I have Postfix setup with very little restrictions: mynetworks = 127.0.0.0/8, 10.0.0.0/8 only. Like I said it appears all mail is getting passed through, but I hate seeing errors and it is confusing me as to why it would be attempting to connect to other machines as seen in the log. Some Output of cat /var/log/mail.log|grep 3F1AB42132 Jul 5 02:04:01 relay postfix/smtpd[1653]: 3F1AB42132: client=unknown[10.41.0.109] Jul 5 02:04:01 relay postfix/cleanup[1655]: 3F1AB42132: message-id= Jul 5 02:04:01 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:04:31 relay postfix/smtp[1634]: 3F1AB42132: to=, relay=none, delay=30, delays=0.02/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.110]:25: Connection refused) Jul 5 02:13:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:14:28 relay postfix/smtp[1681]: 3F1AB42132: to=, relay=none, delay=628, delays=598/0.01/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.247]:25: Connection refused) Jul 5 02:28:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:29:28 relay postfix/smtp[1684]: 3F1AB42132: to=, relay=none, delay=1527, delays=1497/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.135]:25: Connection refused) Jul 5 02:58:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 02:59:28 relay postfix/smtp[1739]: 3F1AB42132: to=, relay=none, delay=3327, delays=3297/0/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.40.40.130]:25: Connection timed out) Jul 5 03:58:58 relay postfix/qmgr[1588]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 03:59:28 relay postfix/smtp[1839]: 3F1AB42132: to=, relay=none, delay=6928, delays=6897/0.03/30/0, dsn=4.4.1, status=deferred (connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 04:11:03 relay postfix/qmgr[2039]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 04:11:33 relay postfix/error[2093]: 3F1AB42132: to=, relay=none, delay=7653, delays=7622/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 05:21:03 relay postfix/qmgr[2039]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 05:21:33 relay postfix/error[2217]: 3F1AB42132: to=, relay=none, delay=11853, delays=11822/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 06:29:25 relay postfix/qmgr[2420]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 06:29:55 relay postfix/error[2428]: 3F1AB42132: to=, relay=none, delay=15954, delays=15924/30/0/0.08, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.41.0.101]:25: Connection refused) Jul 5 07:39:24 relay postfix/qmgr[2885]: 3F1AB42132: from=, size=3404, nrcpt=1 (queue active) Jul 5 07:39:54 relay postfix/error[2936]: 3F1AB42132: to=, relay=none, delay=20153, delays=20123/30/0/0, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to ab.xyz.com[10.40.40.130]:25: Connection timed out)

    Read the article

  • Intranet Site Authentication Issues on SBS 2008

    - by mwillmott
    Hello, Simply, the Sharepoint intranet site that is automatically installed with SBS 2008 is bound to port 5555 in IIS so to get to it you can browse to server-name:5555 and then authenticate using domain credentials. I have added another binding on port 80 using a host header so intranet.localdomain.local (and added the required record in the DNS). This works fine from any computer on the domain, you can go to the nicer address and authenticate no problem. However, when you browse to the port 80 binding on the local server it reaches it but fails to authenticate. I cannot figure out why and it is really annoying. Not essential to fix but it would be nice. Any ideas? Michael

    Read the article

  • Windows XP Domain Logon takes between 40 - 60 minutes

    - by Bryan
    Windows XP Clients, fully patched, with Symantec Endpoint Protection 11 client Windows 2008 R2 domain Roaming profiles Folder Redirection applied to Documents, AppData & Desktop I've enabled userenv logging, and logged on just after 17:00 last night. The user shell hadn't appeared at 17:45 when I left last night. When I arrived this morning, I checked the log file and found the following. USERENV(3f8.e7c) 17:02:18:296 LogExtSessionStatus: Successfully logged Extension Session data USERENV(654.a30) 17:04:09:468 ImpersonateUser: Failed to impersonate user with 5. USERENV(654.a30) 17:04:09:468 GetUserNameAndDomain Failed to impersonate user USERENV(654.a30) 17:04:09:468 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available. USERENV(c8c.cb8) 17:04:09:781 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(cd0.cd4) 17:04:10:781 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(d08.c84) 17:07:09:609 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(cbc.cc0) 17:07:10:625 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\luall.exe USERENV(db0.db4) 17:07:10:781 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(e00.e0c) 17:07:11:062 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(e20.e34) 17:07:11:203 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(e40.e50) 17:07:11:406 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(efc.54c) 17:07:11:656 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(ccc.df0) 17:08:45:687 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(e24.e20) 17:08:45:937 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\luall.exe USERENV(ff0.ff4) 17:08:46:078 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(32c.cd0) 17:08:46:265 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(cc4.3d4) 17:08:46:406 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(434.4d0) 17:08:46:593 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(f2c.ac) 17:08:46:828 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(d60.d7c) 17:09:40:265 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(d94.d98) 17:09:40:531 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(bc4.3c4) 17:10:52:765 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(37c.90c) 17:10:52:984 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\luall.exe USERENV(580.540) 17:10:53:109 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(c18.c30) 17:10:53:312 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(c44.288) 17:10:53:468 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(a34.cf4) 17:10:53:656 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(d3c.d4c) 17:10:53:890 LibMain: Process Name: C:\Program Files\Symantec\LiveUpdate\LuCallbackProxy.exe USERENV(970.948) 17:15:09:468 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(150.9dc) 17:15:09:734 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(f90.cec) 17:20:38:718 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(d8c.d70) 17:20:38:984 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(9a0.fa0) 17:26:07:953 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(844.51c) 17:26:08:218 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(d00.9ac) 17:31:19:453 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(ad4.624) 17:31:19:718 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(654.694) 17:31:46:390 ImpersonateUser: Failed to impersonate user with 5. USERENV(654.694) 17:31:46:390 GetUserNameAndDomain Failed to impersonate user USERENV(654.694) 17:31:46:390 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available. USERENV(af8.610) 17:36:48:625 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(aa4.dfc) 17:36:48:906 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(2dc.5c8) 17:42:17:812 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(f70.8ac) 17:42:18:078 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(d50.c30) 17:47:47:062 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(c2c.c3c) 17:47:47:328 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(ef0.4cc) 17:53:16:234 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(cd4.c84) 17:53:16:500 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE USERENV(828.8c4) 17:58:45:484 LibMain: Process Name: C:\Program Files\Symantec\Symantec Endpoint Protection\SescLU.exe USERENV(a24.b30) 17:58:45:750 LibMain: Process Name: C:\PROGRA~1\Symantec\LIVEUP~1\LUCOMS~1.EXE I've seen posts suggesting that it may be Windows Desktop Search 3.01 that is causing this, so I've removed that. I've removed the policy, 'Always wait for the network at startup or logon', thinking that might have helped. I'm running out of ideas. Has anyone seen this before?

    Read the article

  • ORA-12705: Cannot access NLS data files or invalid environment specified

    - by Mohit Nanda
    I am getting this error while trying to create a connection pool, on my Oracle database, Oracle 10gR2. java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-12705: Cannot access NLS data files or invalid environment specified I am able to connect to the database over sqlplus & iSQLPlus client, but when I try to connect using this Java program, I get this error just when the connection pool is to be initialised and it does not initialise the connection pool. Can someone please help me resolving it? DB Version: Oracle version 10.2.0.1 OS: RHEL 4.0 Here is a barebone, java code which is throwing this error, while connecting to my database. import java.sql.*; public class connect{ public static void main(String[] args) { Connection con = null; CallableStatement cstmt = null; String url = "jdbc:oracle:thin:@hostname:1521:oracle"; String userName = "username"; String password = "password"; try { System.out.println("Registering Driver ..."); DriverManager.registerDriver (new oracle.jdbc.driver.OracleDriver()); System.out.println("Creating Connection ..."); con = DriverManager.getConnection(url, userName, password); System.out.println("Success!"); } catch(Exception ex) { ex.printStackTrace(System.err); } finally { if(cstmt != null) try{cstmt.close();}catch(Exception _ex){} if(con != null) try{con.close();}catch(Exception _ex){} } } }

    Read the article

  • Samba4 advice for production use

    - by pgb
    I have an old Samba 3 + LDAP server installed that needs to be rebuilt. I'm weighting my options, and Windows Server seems too expensive at the moment, and Samba 4 appeared to be a nice option, coupled with the last Bind 9 that can dynamically add the computers to the DNS. I have about 30 workstations, so I still consider it a small network. My questions are: Is Samba 4 stable enough for production? It seems as if the Samba team is too cautious on when to call their version final, or even beta, as compared with other open source projects. What Linux distribution would you recommend to set it up? I usually use Ubuntu Server, but may use another one if installing / maintaining Samba 4 is better on that one.

    Read the article

  • Windows Network Load Balancing on ESX Cluster with Dell PowerConnect stacks

    - by dunxd
    We recently switched out our Cisco 6500 core switch for a pair of Dell PowerConnect 6248 stacks. Since then, our Network Load Balanced Sharepoint, which runs on two virtual machines on an ESX cluster has been behaving very poorly. The symptoms are that opening and saving documents stored in sharepoint takes a very very long time. There are no errors showing up on the Sharepoint servers or SQL server, just a lot of annoyed users. Initially I thought there was no way NLB could cause this, but as soon as we repointed the DNS records for our intranet to the ip address of one of the web front ends, the problems disappeared. We suspect there is an issue related to multicast in the Dell configs - NLB is configured for multicast, but not IGMP. Has anyone got a similar set up to us and fixed this sort of issue? Sharepoint on VMware ESX, with Dell PowerConnect switches.

    Read the article

  • TMG Forefront Proxy blocking internal HTTP requests

    - by Pascal
    I have TMG Forefront with Proxy installed and configured. However, whenever I make internal HTTP requested to servers on the internal network with a fully qualified dns name, the proxy denies the connection. Denied Connection FRW-02 18/03/2011 20:06:37 Log type: Web Proxy (Forward) Status: 12202 Forefront TMG denied the specified Uniform Resource Locator (URL). Rule: Default rule Source: Internal (10.50.75.21:21492) Destination: Internal (10.50.75.10:8080) Request: GET http://app-01.mydomain.com.br:9871/internalwebserver_deploy/MyServiceService.svc?wsdl Filter information: Req ID: 0a157279; Compression: client=No, server=No, compress rate=0% decompress rate=0% Protocol: http User: anonymous How can I get around this block? This is an internal call, so it should block it. If I use only http://app-01:9871/internalwebserver_deploy/MyServiceService.svc?wsdl, without the domain after the server name, then it doesn't get blocked. 10.50.75.10 is the firewall's ip, and the internal network's gateway.

    Read the article

  • Remote desktop is slow when connecting to a computer which is part of a domain

    - by Peuge
    Hey all, We have two windows 2003 machines, one is a DC and another is joined to the domain of the DC. These machines are not locally available to us so we have to remote desktop into them. When we first got the machines remote desktop was blazing as the machines are only a couple of miles away. I then installed AD and setup routing and remote access, I also setup DNS on the DC. Now when I try remote Desktop into the machine which is part of the domain (not the DC) it is painfully slow! Remote Desktop onto the DC is also noticeably slower! Another problem is that our FTP to the DC has also become slow. I don't know what other information I can provide, as I am new to Sys Admin (moving over from development). The speed should be fast as these machines are only a couple of miles away. Any help / suggestions is greatly appreciated! Thanks Peuge

    Read the article

  • low-cost RAID NAS for home use?

    - by gravyface
    Have a noisy, power-hungry Pentium 4 based Ubuntu server that I want to replace with a nice, low-power mini-ITX/Intel Atom-based machine to do my network services (DHCP, DNS, IPSec, Web/mail, FTP, etc.) and am thinking of a (hopefully) equally-low powered NAS using NFS over GbE with at least 1 TB space and a RAID 5 (preferred) or RAID 0 (likely) configuration for redundancy with a couple of spare disks I can swap in as needed down the road. Would I be better off getting a full sized ATX mobo/case and configuring the RAID internally? I really want to keep power consumption down as much as possible as I leave my home server up 24/7.

    Read the article

  • low-cost RAID NAS for home use?

    - by gravyface
    Have a noisy, power-hungry Pentium 4 based Ubuntu server that I want to replace with a nice, low-power mini-ITX/Intel Atom-based machine to do my network services (DHCP, DNS, IPSec, Web/mail, FTP, etc.) and am thinking of a (hopefully) equally-low powered NAS using NFS over GbE with at least 1 TB space and a RAID 5 (preferred) or RAID 0 (likely) configuration for redundancy with a couple of spare disks I can swap in as needed down the road. Would I be better off getting a full sized ATX mobo/case and configuring the RAID internally? I really want to keep power consumption down as much as possible as I leave my home server up 24/7.

    Read the article

  • Ldap ssh authentication is super slow... any way to speed it up?

    - by Johnathon
    I am running OpenSUSE. Here is the output of ssh -vvv: OpenSSH_5.8p1, OpenSSL 1.0.0c 2 Dec 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to <ipaddress> [ipaddress] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug3: Incorrect RSA1 identifier debug3: Could not load "/root/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /root/.ssh/id_rsa type 1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1 debug1: match: OpenSSH_5.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "ipaddress" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 138/256 debug2: bits set: 529/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA cb:7f:ff:2e:65:28:f0:95:e6:8a:71:24:2a:67:02:2b debug3: load_hostkeys: loading entries for host "<ipaddress>" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /root/.ssh/known_hosts:4 debug3: load_hostkeys: loaded 1 keys debug1: Host '<ipaddress>' is known and matches the RSA host key. debug1: Found key in /root/.ssh/known_hosts:4 debug2: bits set: 504/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/id_rsa (0xb789d5c8) debug2: key: /root/.ssh/id_dsa ((nil)) debug2: key: /root/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey,keyboard-interactive debug3: start over, passed a different list publickey,keyboard-interactive debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /root/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply It hangs here for a good 30 seconds to a minute then debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug1: Trying private key: /root/.ssh/id_ecdsa debug3: no such identity: /root/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 I added PubkeyAuthentication no to the /etc/ssh/ssh_config and the /etc/ssh/sshd_config which makes it faster getting to the password prompt, but the password prompt still takes some time. Any way to fix that? Here is where the password hangs debug3: packet_send2: adding 32 (len 25 padlen 7 extra_pad 64) debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 0 debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) debug1: Authentication succeeded (keyboard-interactive). Authenticated to ipaddress ([ipaddress]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. FIXED!!!!!!!!!!!!!! What is did... In the nsswitch_conf I had ldap included in the group and passwd which slows it down a lot. Thank you everybody for your input passwd: compat group: files hosts: files dns networks: files dns

    Read the article

  • WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

    - by christian
    I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

    Read the article

  • Reboot loop after sysprep of AD machine

    - by rboarman
    Major screw-up here and I need to find out how much trouble I am in. I have an AD machine that is running Server 2008 R2, hyperv, DHCP and DNS. On the hyperv machine, I have a backup AD instance running along with a handfull of other server 2008 instances. Sysprep was run on the hyperv machine instead of one of the instances. I am attempting to bring the machine back up so I can try a system restore. When I boot the hyperv machine, I get an error that says “Windows could not complete the installation. To install windows on this computer , restart the installation” This message occurs in safe mode, AD restore mode and in last known configuration mode. How can I get my OS to boot at this point? Do I need to reinstall 2008 R2 from scratch?

    Read the article

  • Join Production Server 2008 to 2003 domain

    - by Campo
    I administer a production server for a .com. It is live right now. Server 2008 x64 IIS 7 SQL 2008 PHP MYSQL I have another server which is a DC Server 2003 x86 and a warm standby for the website, sql, DFS, exchange queue. In order to get DFS going to transfer user photos and other content I need it in the domain. My question is, What preparations do I need to do to the production server to allow a smooth transition onto the domain? Things such as permissions for the website. I do not want to be running around resetting all the permissions. The Group Policy on the DC is completely default. Should I add the DNS manually or allow it to add itself? Anything else I left out.

    Read the article

  • Samba: session setup failed: NT_STATUS_LOGON_FAILURE

    - by stivlo
    I tried to set up Samba with "unix password sync", but I still get logon failure. I am running Ubuntu Natty Narwhal. $ smbclient -L localhost Enter stivlo's password: session setup failed: NT_STATUS_LOGON_FAILURE Here is my /etc/samba/smb.conf [global] workgroup = obliquid server string = %h server (Samba, Ubuntu) dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user [www] path = /var/www browsable = yes read only = no create mask = 0755 After modifying I restarted the servers: $ sudo restart smbd $ sudo restart nmbd However I still can't logon with my Unix username and password. Can anyone please help? Thank you in advance!

    Read the article

  • Time Machine + Ubee Router?

    - by Charlie
    I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Machine hooked up to it from LAN1 (on the Ubee) to the WAN port on the TM. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TM IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TM says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

    Read the article

  • Kickstart PXE Boot Installation not working

    - by Anshuman
    I tried installing PXE Boot Installation Server on RHEL 6.0. I seem to have done everything according to the page: http://www.linux-sxs.org/internet_serving/pxeboot.html. In my case, the client boots, gets DHCP IP address from our server, connects to the Kickstart server too, but then nothing happens. It shows: Loading 192.168.1.101: pxe.linux.0 ..... 192.168.1.101 in my kickstart server. Did any one face such a situation? I'm using a test env on Oracle Virtualbox with DNS Server on RHEL 6.0, DHCP Server on CentOS 6.0 and Kickstart server on RHEL 6.0. The image I'm trying to install is that of REHL 6.0! Awaiting some responses! Cheers, Anshuman

    Read the article

  • network design to segregate public and staff

    - by barb
    My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >