Search Results

Search found 32994 results on 1320 pages for 'second level cache'.

Page 160/1320 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

• RAID P410i and P812 performance issues

  - by Alexey

  I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

  Read the article

• USB drive gets infected every time I plug it into my laptop

  - by ashwnacharya

  Whenever I plug in my USB flash drive into my laptop running Windows XP, an AutoRun.inf file gets created inside it. Also a hidden folder called "Cache" which uses the Recycle bin icon gets created. AutoRUn.inf file cannot be opened in Windows. Both the Autorun.inf file and the "Cache" folder cannot be deleted. I opened the AutoRun.inf file using Ubuntu. I saw that it is trying to run a file Cache\TMP983.exe. I ran all anti-spywares, anti-malwares, anti-viruses, USB autorun eaters, but to no avail. How do I fix this?

  Read the article

• Alter View not recognizing column

  - by Chris

  I have scripts for adding columns to tables which worked. When I run scripts to alter views with the new column the script fails because the columns are not recognized Msg 207, Level 16, State 1, Procedure UniqueTempDispositions, Line 76 Invalid column name 'servicerequestid'. Msg 207, Level 16, State 1, Procedure UniqueTempDispositions, Line 47 Invalid column name 'servicerequestid'. Msg 207, Level 16, State 1, Procedure MergeDispositions, Line 54 Invalid column name 'ServiceRequestID'. Msg 207, Level 16, State 1, Procedure NonPIICachedDispositions, Line 18 Invalid column name 'ServiceRequestID'. Any reason why? Am I missing something? I've started and stopped the server, I've relogged in to no avail.

  Read the article

• ALTER TABLE on dependant column

  - by Sharmi

  I am trying to alter column datatype of a primary key to tinyint from int.This column is a foreign key in other tables.So,I get the following error: Msg 5074, Level 16, State 1, Line 1 The object 'PK_User_tbl' is dependent on column 'appId'. Msg 5074, Level 16, State 1, Line 1 The object 'FK_Details_tbl_User_tbl' is dependent on column 'appId'. Msg 5074, Level 16, State 1, Line 1 The object 'FK_Log_tbl_User_tbl' is dependent on column 'appId'. Msg 4922, Level 16, State 9, Line 1 ALTER TABLE ALTER COLUMN appId failed because one or more objects access this column. Howw should i rectify this?

  Read the article

• Creating same-width hit-zones on MenuItems in ASP.NET 2.0 Menus that include MenuItems added at runt

  - by Cary Jensen

  In an ASP.NET 2.0 application, I want to permit a user to select a MenuItem, even if the user does not click the actual text of the MenuItem, but instead only clicks the highlight area that ASP.NET places around the currently selected MenuItem (represented by the DynamicHoverStyle.BackColor property). Since the BackColor is displayed the same width for each MenuItem in a submenu, based on MenuItem with the longest text, I would like to make the hit-zone (clickable area) of each sub-MenuItem the same width (same at the BackColor area), regardless of how much text is displayed in the in each individual sub-MenuItem. Here's the setup. I am using a Menu on a MasterPage to display a similar menu on each of my pages. Some of the pages suppress this menu, and some of them add addition MenuItems, sometimes to the top level, sometimes adding sub-MenuItems to an existing top-level MenuItem, and sometimes both (adding a MenuItem to the top level and then additional MenuItems as submenuitems to that newly added top level. This menu has a horizontal orientation, and it is dynamic, in that only the top level is initially exposed, and the submenus are displayed when selected. During usability testing, we noticed that users would select a top-level menu item to expose the submenu, and then select a submenu item, but not by necessarily clicking on the submenu item text, but instead clicking on the BackColor area of the submenu item. Since the text of some MenuItems are longer than others, MenuItems with short Text have a rather large BackColor area. When the user clicks on the BackColor area, but not directly on the MenuItem Text, nothing happens, since the user didn't actually click on the submenu item hit zone. Although there are visual cues as to what part of the displayed MenuItem is clickable (the mouse pointer changes to a link cursor when the mouse is positioned on the MenuItem Text, but not when it is only hovering over the BackColor), this behavior confused the users. They highlighted a MenuItem, and clicked it, but nothing happened. I would to make clicking a MenuItem successful, even if the user did not click on the actual Text of the MenuItem, but simply click on the BackColor area. It seems like there should be a property somewhere to control the width of the active area of the displayed MenuItems, but I do not see it. Any suggestions, given that I am creating some of these MenuItems at runtime?

  Read the article

• How to group data changes by operation with MySQL triggers

  - by Jan-Henk

  I am using triggers in MySQL to log changes to the data. These changes are recorded on a row level. I can now insert an entry in my log table for each row that is changed. However, I also need to record the operation to which the changes belong. For example, a delete operation like "DELETE * FROM table WHERE type=x" can delete multiple rows. With the trigger I can insert an entry for each deleted row into the log table, but I would like to also provide a unique identifier for the operation as a whole, so that the log table looks something like: log_id operation_id tablename fieldname oldvalue newvalue 1 1 table id 1 null 2 1 table type a null 3 1 table id 2 null 4 1 table type a null 5 2 table id 3 null 6 2 table type b null 7 2 table id 4 null 8 2 table type b null Is there a way in MySQL to identify the higher level operation to which the row changes belong? Or is this only possible by means of application level code? In the future it would also be nice to be able to record the transaction to which an operation belongs. Another question is if it is possible to capture the actual SQL query, besides using the query log. I don't think so myself, but maybe I am missing something. It is of course possible to capture these at the application level, but the goal is to keep intrusions to the application level code as minimal as possible. When this is not possible with MySQL, how is this with other database systems? For the current project it is not an option to use something other than MySQL, but it would be nice to know for future projects.

  Read the article

• What to do when GMap Satellite imagery is unavailable

  - by robstenson

  Hello-- is it possible to programmatically detect with the google maps api (javascript, v2) when satellite imagery is unavailable at a certain zoom level? I am creating some maps automatically and setting them to a certain zoom level, but in a few cases there is no satellite imagery available at that level, in which case I'd like to automatically back up a zoom level. Does the api expose some way of determining this lack of imagery? So far the only thing I can think of is trying to find out, with javascript, whether or not the image requests that the api makes are failing, and then reacting based on those failed image requests, but I can't really get it to work... and it seems a little inelegant. Thanks for your help!

  Read the article

• How do I convert from unicode to single byte in C#?

  - by xarzu

  How do I convert from unicode to single byte in C#? This does not work: int level =1; string argument; // and then argument is assigned if (argument[2] == Convert.ToChar(level)) { // does not work } And this: char test1 = argument[2]; char test2 = Convert.ToChar(level); produces funky results. test1 can be: 49 '1' while test2 will be 1 ''

  Read the article

• can load data(google app enngine) from http://localhost:8100/remote_api ..

  - by zjm1126

  i can download data from gae (http://zjm1126.appspot.com/remote_api), this is code: appcfg.py download_data --application=zjm1126 --url=http://zjm1126.appspot.com/remote_api --filename=a.csv and it successful : D:\zjm_demo\app>appcfg.py download_data --application=zjm1126 --url=http://zjm1 126.appspot.com/remote_api --filename=a.csv Downloading data records. [INFO ] Logging to bulkloader-log-20100618.162421 [INFO ] Throttling transfers: [INFO ] Bandwidth: 250000 bytes/second [INFO ] HTTP connections: 8/second [INFO ] Entities inserted/fetched/modified: 20/second [INFO ] Batch Size: 10 [INFO ] Opening database: bulkloader-progress-20100618.162421.sql3 [INFO ] Opening database: bulkloader-results-20100618.162421.sql3 [INFO ] Connecting to zjm1126.appspot.com/remote_api Please enter login credentials for zjm1126.appspot.com Email: [email protected] Password for [email protected]: [INFO ] Downloading kinds: [u'LogText', u'Greeting', u'Forum', u'Thread'] .... [INFO ] Have 0 entities, 0 previously transferred [INFO ] 0 entities (8804 bytes) transferred in 11.3 seconds so i want to know can load data from 127.0.0.1 , this is my code : appcfg.py download_data --application=zjm1126 --url=http://localhost:8100/remote_api --filename=a.csv and the error is : D:\zjm_demo\app>appcfg.py download_data --application=zjm1126 --url=http://loca lhost:8100/remote_api --filename=a.csv Downloading data records. [INFO ] Logging to bulkloader-log-20100618.162325 [INFO ] Throttling transfers: [INFO ] Bandwidth: 250000 bytes/second [INFO ] HTTP connections: 8/second [INFO ] Entities inserted/fetched/modified: 20/second [INFO ] Batch Size: 10 [INFO ] Opening database: bulkloader-progress-20100618.162325.sql3 [INFO ] Opening database: bulkloader-results-20100618.162325.sql3 Please enter login credentials for localhost Email: [email protected] Password for [email protected]: [INFO ] Connecting to localhost:8100/remote_api [ERROR ] Exception during authentication Traceback (most recent call last): File "d:\Program Files\Google\google_appengine\google\appengine\tools\bulkload er.py", line 3169, in Run self.request_manager.Authenticate() File "d:\Program Files\Google\google_appengine\google\appengine\tools\bulkload er.py", line 1178, in Authenticate remote_api_stub.MaybeInvokeAuthentication() File "d:\Program Files\Google\google_appengine\google\appengine\ext\remote_api \remote_api_stub.py", line 542, in MaybeInvokeAuthentication datastore_stub._server.Send(datastore_stub._path, payload=None) File "d:\Program Files\Google\google_appengine\google\appengine\tools\appengin e_rpc.py", line 346, in Send f = self.opener.open(req) File "D:\Python25\lib\urllib2.py", line 387, in open response = meth(req, response) File "D:\Python25\lib\urllib2.py", line 498, in http_response 'http', request, response, code, msg, hdrs) File "D:\Python25\lib\urllib2.py", line 425, in error return self._call_chain(*args) File "D:\Python25\lib\urllib2.py", line 360, in _call_chain result = func(*args) File "D:\Python25\lib\urllib2.py", line 506, in http_error_default raise HTTPError(req.get_full_url(), code, msg, hdrs, fp) HTTPError: HTTP Error 404: Not Found [INFO ] Authentication Failed so what should i do , thanks

  Read the article

• Is an Intel Atom D525 suitable to run MythTV

  - by Martin Thompson

  I have an oldish netbook with an Atom N450 (1.6GHz, 512KB cache) - I've been using it to experiment with MythTV, but it seems really slow, even just to work through the menus! Seconds, sometimes 10 or 20s, to load a new menu. Admittedly from a remote backend, but my older Core1 based laptop seems to be fine with the same setup. I was hoping to use one of the so-called "nettop" devices which currently seem to be D525-based (1.8GHz, 1MB cache) - is double the cache really going to make that much difference? Or has the internal architecture of the Atom moved on leaps and bounds in between? Given that I design non-Intel embedded computers for a living I was hoping to get lots of hardcore architecture detail from the Intel website, so I could see for myself, but I can't find it! So: will a D525 be fast enough to run a MythTV backend/frontend combined box?

  Read the article

• KeyUp processed for wrong control

  - by Mikael

  I have made a simple test application for the issue, two winforms each containing a button. The button on the first form opens the other form when clicked. It also subscribes to keyup events. The second form has its button set as "AcceptButton" and in the Clicked event we sleep for 1s and then set DialogResult to true (the sleep is to simulate some processing done) When enter is used to close this second form the KeyUp event of the button on the first form is triggered, even though the key was released well before the second had passed so the second form was still shown and focused. If any key other then enter is pressed in the second form the event is not triggered for the button on the first form. First form: public Form1() { InitializeComponent(); buttonForm2.KeyUp += new KeyEventHandler(cntKeyUp); } void cntKeyUp(object sender, KeyEventArgs e) { MessageBox.Show(e.KeyCode.ToString()); } private void buttonForm2_Click(object sender, EventArgs e) { using (Form2 f = new Form2()) { f.ShowDialog(); } } Second form: private void button1_Click(object sender, EventArgs e) { Thread.Sleep(1000); this.DialogResult = DialogResult.OK; } Does anyone know why the event is triggered for the button on the non active form and what can be done to stop this from happening?

  Read the article

• Gaining information from nodes of tree

  - by jainp

  I am working with the tree data structure and trying to come up with a way to calculate information I can gain from the nodes of the tree. I am wondering if there are any existing techniques which can assign higher numerical importance to a node which appears less frequently at lower level (Distance from the root of the tree) than the same nodes appearance at higher level and high frequency. To give an example, I want to give more significance to node Book, at level 2 appearing once, then at level 3 appearing thrice. Will appreciate any suggestions/pointers to techniques which achieve something similar. Thanks, Prateek

  Read the article

• PulpCore OGG music playback - can't loop as soon as I animate the musicVolume property

  - by Peter Perhác

  I have been experimenting with PulpCore for about a week or so and I am enjoying it very much but today I ran into a problem that I can't quite figure out. Sound bgMusic = Sound.load("music/music.ogg"); Playback musicPlayback; ... musicVolume = new Fixed(0.75); musicPlayback = bgMusic.loop(musicVolume); //TODO figure out why it's NOT looping when volume is animated // musicVolume.animate(0, musicVolume.get(), FADE_IN_TIME); This code, for as long as the last line is commented out, plays the music.ogg again and again in an endless loop (which I can stop by calling stop on the Playback object returned from loop(). However, I would like the music to fade in smoothly, so following the advice of the PulpCore API docs, I added the last line which will create the fade-in but the music will only play once and then stop. I wonder why is that? Here is a bit of the documentation: Playback pulpcore.sound.Sound.loop(Fixed level) Loops this sound clip with the specified volume level (0.0 to 1.0). The level may have a property animation attached. Parameters: level Returns: a Playback object for this unique sound playback (one Sound can have many simultaneous Playback objects) or null if the sound could not be played. So what could be the problem? I repeat, with the last line, the sound fades in but doesn't loop, without it it loops but starts with the specified 0.75 volume level.

  Read the article

• Autodetect/mount SDCards and run script for them on Linux

  - by Brendan

  Hey Everyone, I'm currently running SME Server, and need to have a script run upon the attachment of SD Cards to my server. The script itself works fine (it copies the contents of the cards), but the automounting and execution of the script is where I'm having issues. The I have a USB hub consisting of 10 USB ports; that shows up as: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 (The hub is the TERMINUS TECHNOLOGY INC entries) As I cannot plug SD Cards directly into the server; I use a USB to SD card attachement (10 of them) plugged into the hub to read the cards. Upon pluggig the 10 attachments (without cards) into the hub; lsusb yields the following: [root@server ~]# lsusb Bus 004 Device 002: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 073: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 072: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 071: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 070: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 069: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 068: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 067: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 066: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 065: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 064: ID 05e3:0723 Genesys Logic, Inc. Bus 001 Device 055: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 051: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 050: ID 1a40:0101 TERMINUS TECHNOLOGY INC. Bus 001 Device 001: ID 0000:0000 As you can see, the readers are the "Gensys Logic, Inc" entries. Plugging in an SD card to a reader doesn't affect lsusb (it reads exactly as above), however my system recognises the cards fine; as indicated by dmesg: Attached scsi generic sg11 at scsi54, channel 0, id 0, lun 0, type 0 USB Mass Storage device found at 73 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through SCSI device sdd: 31388672 512-byte hdwr sectors (16071 MB) sdd: Write Protect is on sdd: Mode Sense: 03 00 80 00 sdd: assuming drive cache: write through sdd: sdd1 If I manually mount sdd1 (mount /dev/sdd1 /somedirectory/) this works fine. What I'm really after is a solution that automounts each of the cards as they are inputted into the reader; and executes a script for them (this will involve copying their contents to another directory). My problem is that I don't know how to do this; I don't think udev will work as the USB devices don't change; if I could somehow get udev working with /dev/disk/by-path/ however I think this is doable (it seems to keep constant entries). ls /dev/disk returns: pci-0000:00:1d.7-usb-0:4.1.1.1:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.1.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.2:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.3:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0 pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0 pci-0000:0b:01.0-scsi-0:0:1:0-part1 pci-0000:0b:01.0-scsi-0:0:1:0-part2 From above, we can see I have only one card plugged into the reader (pci-0000:00:1d.7-usb-0:4.4:1.0-scsi-0:0:0:0-part1). Going mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 Works and places the card under /media/usbdisk/, however: mount /dev/disk/by-path/pci-0000\:00\:1d.7-usb-0\:4.4\:1.0-scsi-0\:0\:0\:0-part1 slot1/ doesn't work, and returns "mount: can't get address for /dev/disk/by-path/pci-0000" Any ideas and solutions would be great, I've seen the knowledge of a lot of the guys on here before so I'm hopeful someone can help me out. Thanks

  Read the article

• Perforce Proxy Server: Caching selective files [closed]

  - by fbrereto

  I just set up a Perforce proxy server for work. I'm noticing the cache directory is filling up very quickly -- with files I know I will never need. For example, there is a 'sandbox' directory in the depot where users keep personal branches and other work; a p4 sync is causing the p4 proxy cache to grab these user's sandboxes when I'll never need them. I would create a symbolic link for the sandbox directory to /dev/null but then I wouldn't be caching my sandbox, which I am interested in. Is there any way to tell the perforce proxy something to the effect of "if I haven't had to sync it, please don't cache it?"

  Read the article

• How to use 2 different item renderers in mx:Tree

  - by user298170

  Question for Flex guys. How can I use multiple item renderers in mx:Tree depending on item's depth/level in tree? For example. For the first level items I want to use label with button and for second level items combobox. Is this somehow possible?

  Read the article

• eAccelerator ignore my new setting?

  - by Mwebe Nkrumah

  Hi, Im using eAccelerator 0.9.5.2, CentOS 5.3, lighttpd 1.4.22 But because eAccelerator is cached in RAM, I needs too much RAM. So Im trying to cache in hard disk. (my website is not generate money, so Im thinking about cheaper solution) So, I modify /etc/php.d/eaccelerator.ini with below codes: extension="eaccelerator.so" eaccelerator.shm_size="12" eaccelerator.cache_dir="/var/cache/eaccelerator" eaccelerator.enable="1" eaccelerator.optimizer="1" eaccelerator.check_mtime="0" eaccelerator.debug="0" eaccelerator.filter="" eaccelerator.shm_max="20M" eaccelerator.shm_ttl="1800" eaccelerator.shm_prune_period="0" eaccelerator.shm_only="0" eaccelerator.compress="0" eaccelerator.compress_level="9" eaccelerator.keys="disk_only" eaccelerator.sessions="disk_only" eaccelerator.content="disk_only" So, the output of phpinfo() as below: http://img175.imageshack.us/img175/1104/screenshggot.png But after using "disk_only" in eAccelerator and restart lighttpd & php-cgi using killall, my RAM usage is still high for php-cgi. Reboot the server also not works. The data is created in cache directory, but RAM usage is still high.

  Read the article

• Generate or update a PDF to include an encrypted, hidden watermark?

  - by Dave Jarvis

  Background Using LaTeX to write a book. When a user purchases the book, the PDF will be generated automatically. Problem The PDF should have a watermark that includes the person's name and contact information. Question What software meets the following criteria: Applies encrypted, invisible watermarks to a PDF Open Source Platform independent (Linux, Windows) Fast (marks a 200 page PDF in under 1 second) Batch processing (exclusively command-line driven) Collusion-attack resistant Non-fragile (e.g., PDF - EPS - PDF still contains the watermark) Well documented (shows example usages) Ideas & Resources Some thoughts and findings: Natural language processing (NLP) watermarks. Apply steganography on a randomly selected image. http://openstego.sourceforge.net/cmdline.html The problem with NLP is that grammatical errors can be introduced. The problem with steganography is that the images are sourced from an image cache, and so recreating that cache with watermarked images will impart a delay when generating the PDF (I could just delete one image from the cache, but that's not an elegant solution). Thank you!

  Read the article

• How to generate user-specific PDF with encrypted hidden watermark?

  - by Dave Jarvis

  Background Using LaTeX to write a book. When a user purchases the book, the PDF will be generated automatically. Problem The PDF should have a watermark that includes the person's name and contact information. Question What software meets the following criteria: Applies encrypted, undetectable watermarks to a PDF Open Source Platform independent (Linux, Windows) Fast (marks a 200 page PDF in under 1 second) Batch processing (exclusively command-line driven) Collusion-attack resistant Non-fragile (e.g., PDF - EPS - PDF still contains the watermark) Well documented (shows example usages) Ideas & Resources Some thoughts and findings: Natural language processing (NLP) watermarks. Apply steganography on a randomly selected image. http://openstego.sourceforge.net/cmdline.html The problem with NLP is that grammatical errors can be introduced. The problem with steganography is that the images are sourced from an image cache, and so recreating that cache with watermarked images will impart a delay when generating the PDF (I could just delete one image from the cache, but that's not an elegant solution). Thank you!

  Read the article

• Squid/Kerberos authentication with only Linux

  - by user28362

  Hi, I would like to know if it possible to let a Windows Xp machine authenticate to Squid (Linux) using Kerberos without the need of an Active Directory domain. I only want to create a Kerberos ticket on the client side, which should give the client access to squid (using I.E.). I only found tutorials about configuring A.D./Squid, not an environment with only Linux servers. Thanks Update: The kerberos setup is correctly done, the proxy and client can get tickets. As for the browser (FF/IE), I get: ERROR Cache Access Denied While trying to retrieve the URL: http://www.google.com/ The following error was encountered: * Cache Access Denied. Sorry, you are not currently allowed to request: http://www.google.com/ from this cache until you have authenticated yourself. In kerberos, I get: squid_kerb_auth: Got 'YR ElRNTVMTUABBAABAB4IIogAAAAAAAAAAAAAAAAAAAAAFASgDAAAADw==' from squid (length: 59). squid_kerb_auth: parseNegTokenInit failed with rc=101 squid_kerb_auth: received type 1 NTLM token This message is strange, as I didn't configure NTLM. It looks like the browser uses the wrong authentication methode.

  Read the article

• How to control CSS class applied to ASP.NET 4 Menu with RenderingMode=List

  - by Joe

  I am using an ASP.NET 4.0 Menu control with RenderingMode=List and am struggling with creating the appropriate CSS. Each menu item is represented by an <li tag that contains a nested <a tag with what appear to be fixed class names: <a class="level1" for unselected level 1 menu items <a class="level2" for unselected level 2 menu items <a class="level1 selected" for the selected level 1 menu item ... etc... What I want to do is to is to prevent the currently selected menu item from being "clickable". To do so I tried using: if (menuItem.Selected) menuItem.Selectable = false; This has the desired effect of removing the href attribute from the <a tag but also removes the class attribute - and as a result my CSS can not identify what level the menu item belongs to! Looks to me like a possible bug, but in any case I can't find any documentation describing what CSS class names are used, nor whether there is any way to control this (the old Style properties don't appear to have any effect). Ideally I would like to have "level" class attributes on the <li tags, not just the nested <a tags.

  Read the article

• java logging nightmare and log4j not behaving as expected with spring + tomcat6

  - by maverick

  I have a spring application that has configured log4j (via xml) and that runs on Tomcat6 that was working fine until we add a bunch of dependencies via Maven. At some point the whole application just started logging part of what it was supposed to be declared into the log4.xml "a small rant here" Why logging has to be that hard in java world? why suddenly an application that was just fine start behaving so weird and why it's so freaking hard to debug? I've been reading and trying to solve this issue for days but so far no luck, hopefully some expert here can give me some insights on this I've added log4j debug option to check whether log4j is taking reading the config file and its values and this is what part of it shows log4j: Level value for org.springframework.web is [debug]. log4j: org.springframework.web level set to DEBUG log4j: Retreiving an instance of org.apache.log4j.Logger. log4j: Setting [org.compass] additivity to [true]. log4j: Level value for org.compass is [debug]. log4j: org.compass level set to DEBUG As you can see debug is enabled for compass and spring.web but it only shows "INFO" level for both packages. My log4j config file has nothing out of extraordinary just a plain ConsoleAppender <log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/"> <!-- Appenders --> <appender name="console" class="org.apache.log4j.ConsoleAppender"> <param name="Target" value="System.out" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%-5p: %c - %m%n" /> </layout> </appender> What's the trick to make this work? What it's my misunderstanding here? Can someone point me in the right direction and explain how can I make this logging mess more bullet proof?

  Read the article

• help translate this week query from Oracle PL/SQL to SQL Server 2008

  - by Sarah Vessels

  I have the following query that runs in my Oracle database and I want to have the equivalent for a SQL Server 2008 database: SELECT TRUNC( /* Midnight Sunday */ NEXT_DAY(SYSDATE, 'SUN') - (7*LEVEL) ) AS week_start, TRUNC( /* 23:59:59 Saturday */ NEXT_DAY(NEXT_DAY(SYSDATE, 'SUN') - (7*LEVEL), 'SAT') + 1 ) - (1/(60*24)) + (59/(60*60*24)) AS week_end FROM DUAL CONNECT BY LEVEL <= 4 /* Get the past 4 weeks */ What the query does is get the start of the week and the end of the week for the last 4 weeks. It generates data like the following: WEEK_START WEEK_END 2010-03-07 00:00:00 2010-03-13 23:59:59 2010-02-28 00:00:00 2010-03-06 23:59:59 ...

  Read the article

• Script to change the compression of gziped files

  - by João Portela

  I was trying to change the compression of some gzip files from the default compression level (6) or any other compression level to the maximum compression level (9). Does anyone know how?

  Read the article

• How to combine wildcards and spaces (quotes) in an Windows command?

  - by Jan Fabry

  I want to remove directories of the following format: C:\Program Files\FogBugz\Plugins\cache\[email protected]_NN NN is a number, so I want to use a wildcard (this is part of a post-build step in Visual Studio). The problem is that I need to combine quotes around the path name (for the space in Program Files) with a wildcard to match the end of the path. I already found out that rd is the remove command that accepts wildcards, but where do I put the quotes? I have tried no ending quote (works for dir), ...example.com*", ...example.com"*, ...example.com_??", ...cache\"[email protected]*, ...cache"\[email protected]*, but none of them work. (How many commands to remove a file/directory are there in Windows anyway? And why do they all differ in capabilities?)

  Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >