Search Results

Search found 4275 results on 171 pages for 'symbol capture'.

Page 160/171 | < Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >

  • How to diagnose and solve an erratic "HDCP Support Required"?

    - by Jom Orgstrom
    I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

    Read the article

  • OCR anything with OneNote 2007 and 2010

    - by Matthew Guay
    Quality OCR software can often be very expensive, but you may have one already installed on your computer that you didn’t know about.  Here’s how you can use OneNote to OCR anything on your computer. OneNote is one of the overlooked gems in recent versions of Microsoft Office.  OneNote makes it simple to take notes and keep track of everything with integrated search, and offers more features than its popular competitor Evernote.  One way it is better is its high quality optical character recognition (OCR) engine.  One of Evernote’s most popular features is that you can search for anything, including text in an image, and you can easily find it.  OneNote takes this further, and instantly OCRs any text in images you add.  Then, you can use this text easily and copy it from the image.  Let’s see how this works and how you can use OneNote as the ultimate OCR. Please Note: This feature is available in OneNote 2007 and 2010.  OneNote 2007 is included with Office 2007 Home and Student, Enterprise, and Ultimate, while OneNote 2010 is included with all edition of Office 2010 except for Starter edition. OCR anything First, let’s add something to OCR into OneNote.  There are many different ways you can add items to OCR into OneNote.  Open a blank page or one you want to insert something into, and then follow these steps to add what you want into OneNote. Picture Simply drag-and-drop a picture with text into a notebook… You can insert a picture directly from OneNote as well.  In OneNote 2010, select the Insert tab, and then choose Picture. In OneNote 2007, select the Insert menu, select Picture, and then choose From File.   Screen Clipping There are many times we’d like to copy text from something we see onscreen, but there is no direct way to copy text from that thing.  For instance, you cannot copy text from the title-bar of a window, or from a flash-based online presentation.  For these cases, the Screen Clipping option is very useful.  To add a clip of anything onscreen in OneNote 2010, select the Insert tab in the ribbon and click Screen Clipping. In OneNote 2007, either click the Clip button on the toolbar or select the Insert menu and choose Screen Clipping.   Alternately, you can take a screen clipping by pressing the windows key + S. When you click Screen Clipping, OneNote will minimize, your desktop will fade lighter, and your mouse pointer will change to a plus sign.  Now, click and drag over anything you want to add to OneNote.  Here we’re selecting the title of this article. The section you selected will now show up in your OneNote notebook, complete with the date and time the clip was made. Insert a file You’re not limited to pictures; OneNote can even OCR anything in most files on your computer.  You can add files directly in OneNote 2010 by selecting File Printout in the Insert tab. In OneNote 2007, select the Insert menu and choose Files as Printout. Choose the file you want to add to OneNote in the dialog. Select Insert, and OneNote will pause momentarily as it processes the file. Now your file will show up in OneNote as a printout with a link to the original file above it. You can also send any file directly to OneNote via the OneNote virtual printer.  If you have a file open, such as a PDF, that you’d like to OCR, simply open the print dialog in that program and select the “Send to OneNote” printer. Or, if you have a scanner, you can scan documents directly into OneNote by clicking Scanner Printout in the Insert tab in OneNote 2010. In OneNote 2003, to add a scanned document select the Insert menu, select Picture, and then choose From Scanner or Camera. OCR the image, file, or screenshot you put in OneNote Now that you’ve got your stuff into OneNote, let’s put it to work.  OneNote automatically did an OCR scan on anything you inserted into OneNote.  You can check to make sure by right-clicking on any picture, screenshot, or file you inserted.  Select “Make Text in Image Searchable” and then make sure the correct language is selected. Now, you can copy text from the Picture.  Simply right-click on the picture, and select “Copy Text from Picture”. And here’s the text that OneNote found in this picture: OCR anything with OneNote 2007 and 2010 - Windows Live Writer Not bad, huh?  Now you can paste the text from the picture into a document or anywhere you need to use the text. If you are instead copying text from a printout, it may give you the option to copy text from this page or all pages of the printout.   This works the exact same in OneNote 2007. In OneNote 2010, you can also edit the text OneNote has saved in the image from the OCR.  This way, if OneNote read something incorrectly you can change it so you can still find it when you use search in OneNote.  Additionally, you can copy only a specific portion of the text from the edit box, so it can be useful just for general copying as well.  To do this, right-click on the item and select “Edit Alt Text”. Here is the window to edit alternate text.  If you want to copy only a portion of the text, simply select it and press Ctrl+C to copy that portion. Searching OneNote’s OCR engine is very useful for finding specific pictures you have saved in OneNote.  Simply enter your search query in the search box on top right, and OneNote will automatically find all instances of that term in all of your notebooks.  Notice how it highlights the search term even in the image! This works the same in OneNote 2007.  Notice how it highlighted “How-to” in a shot of the header image in our favorite website. In Windows Vista and 7, you can even search for things OneNote OCRed from the Start Menu search.  Here the start menu search found the words “Windows Live Writer” in our OCR Test notebook in OneNote where we inserted the screen clip above. Conclusion OneNote is a very useful OCR tool, and can help you capture text from just about anything.  Plus, since you can easily search everything you have stored in OneNote, you can quickly find anything you insert anytime.  OneNote is one of the least-used Office tools, but we have found it very useful and hope you do too. Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteRemove Office 2010 Beta and Reinstall Office 2007How To Create and Publish Blog Posts in Word 2010 & 2007How To Copy Worksheets in Excel 2007 & 2010Add Page Numbers to Documents in Word 2007 & 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers

    Read the article

  • Parallelism in .NET – Part 14, The Different Forms of Task

    - by Reed
    Before discussing Task creation and actual usage in concurrent environments, I will briefly expand upon my introduction of the Task class and provide a short explanation of the distinct forms of Task.  The Task Parallel Library includes four distinct, though related, variations on the Task class. In my introduction to the Task class, I focused on the most basic version of Task.  This version of Task, the standard Task class, is most often used with an Action delegate.  This allows you to implement for each task within the task decomposition as a single delegate. Typically, when using the new threading constructs in .NET 4 and the Task Parallel Library, we use lambda expressions to define anonymous methods.  The advantage of using a lambda expression is that it allows the Action delegate to directly use variables in the calling scope.  This eliminates the need to make separate Task classes for Action<T>, Action<T1,T2>, and all of the other Action<…> delegate types.  As an example, suppose we wanted to make a Task to handle the ”Show Splash” task from our earlier decomposition.  Even if this task required parameters, such as a message to display, we could still use an Action delegate specified via a lambda: // Store this as a local variable string messageForSplashScreen = GetSplashScreenMessage(); // Create our task Task showSplashTask = new Task( () => { // We can use variables in our outer scope, // as well as methods scoped to our class! this.DisplaySplashScreen(messageForSplashScreen); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This provides a huge amount of flexibility.  We can use this single form of task for any task which performs an operation, provided the only information we need to track is whether the task has completed successfully or not.  This leads to my first observation: Use a Task with a System.Action delegate for any task for which no result is generated. This observation leads to an obvious corollary: we also need a way to define a task which generates a result.  The Task Parallel Library provides this via the Task<TResult> class. Task<TResult> subclasses the standard Task class, providing one additional feature – the ability to return a value back to the user of the task.  This is done by switching from providing an Action delegate to providing a Func<TResult> delegate.  If we decompose our problem, and we realize we have one task where its result is required by a future operation, this can be handled via Task<TResult>.  For example, suppose we want to make a task for our “Check for Update” task, we could do: Task<bool> checkForUpdateTask = new Task<bool>( () => { return this.CheckWebsiteForUpdate(); }); Later, we would start this task, and perform some other work.  At any point in the future, we could get the value from the Task<TResult>.Result property, which will cause our thread to block until the task has finished processing: // This uses Task<bool> checkForUpdateTask generated above... // Start the task, typically on a background thread checkForUpdateTask.Start(); // Do some other work on our current thread this.DoSomeWork(); // Discover, from our background task, whether an update is available // This will block until our task completes bool updateAvailable = checkForUpdateTask.Result; This leads me to my second observation: Use a Task<TResult> with a System.Func<TResult> delegate for any task which generates a result. Task and Task<TResult> provide a much cleaner alternative to the previous Asynchronous Programming design patterns in the .NET framework.  Instead of trying to implement IAsyncResult, and providing BeginXXX() and EndXXX() methods, implementing an asynchronous programming API can be as simple as creating a method that returns a Task or Task<TResult>.  The client side of the pattern also is dramatically simplified – the client can call a method, then either choose to call task.Wait() or use task.Result when it needs to wait for the operation’s completion. While this provides a much cleaner model for future APIs, there is quite a bit of infrastructure built around the current Asynchronous Programming design patterns.  In order to provide a model to work with existing APIs, two other forms of Task exist.  There is a constructor for Task which takes an Action<Object> and a state parameter.  In addition, there is a constructor for creating a Task<TResult> which takes a Func<Object, TResult> as well as a state parameter.  When using these constructors, the state parameter is stored in the Task.AsyncState property. While these two overloads exist, and are usable directly, I strongly recommend avoiding this for new development.  The two forms of Task which take an object state parameter exist primarily for interoperability with traditional .NET Asynchronous Programming methodologies.  Using lambda expressions to capture variables from the scope of the creator is a much cleaner approach than using the untyped state parameters, since lambda expressions provide full type safety without introducing new variables.

    Read the article

  • WatiN screenshot saver

    - by Brian Schroer
    In addition to my automated unit, system and integration tests for ASP.NET projects, I like to give my customers something pretty that they can look at and visually see that the web site is behaving properly. I use the Gallio test runner to produce a pretty HTML report, and WatiN (Web Application Testing In .NET) to test the UI and create screenshots. I have a couple of issues with WatiN’s “CaptureWebPageToFile” method, though: It blew up the first (and only) time I tried it, possibly because… It scrolls down to capture the entire web page (I tried it on a very long page), and I usually don’t need that Also, sometimes I don’t need a picture of the whole browser window - I just want a picture of the element that I'm testing (for example, proving that a button has the correct caption). I wrote a WatiN screenshot saver helper class with these methods: SaveBrowserWindowScreenshot(Watin.Core.IE ie)  / SaveBrowserWindowScreenshot(Watin.Core.Element element) saves a screenshot of the browser window SaveBrowserWindowScreenshotWithHighlight(Watin.Core.Element element) saves a screenshot of the browser window, with the specified element scrolled into view and highlighted SaveElementScreenshot(Watin.Core.Element element) saves a picture of only the specified element The element highlighting improves on the built-in WatiN method (which just gives the element a yellow background, and makes the element pretty much unreadable when you have a light foreground color) by adding the ability to specify a HighlightCssClassName that points to a style in your site’s stylesheet. This code is specifically for testing with Internet Explorer (‘cause that’s what I have to test with at work), but you’re welcome to take it and do with it what you want… using System; using System.Drawing; using System.Drawing.Imaging; using System.IO; using System.Reflection; using System.Runtime.InteropServices; using System.Text; using System.Threading; using SHDocVw; using WatiN.Core; using mshtml; namespace BrianSchroer.TestHelpers { public static class WatinScreenshotSaver { public static void SaveBrowserWindowScreenshotWithHighlight (Element element, string screenshotName) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element, screenshotName); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshotWithHighlight(Element element) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshot(Element element, string screenshotName) { SaveScreenshot(GetIe(element), screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(Element element) { SaveScreenshot(GetIe(element), null, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie, string screenshotName) { SaveScreenshot(ie, screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie) { SaveScreenshot(ie, null, SaveBitmapForCallbackArgs); } public static void SaveElementScreenshot(Element element, string screenshotName) { // TODO: Figure out how to get browser window "chrome" size and not have to go to full screen: var iex = (InternetExplorerClass) GetIe(element).InternetExplorer; bool fullScreen = iex.FullScreen; if (!fullScreen) iex.FullScreen = true; ScrollIntoView(element); SaveScreenshot(GetIe(element), screenshotName, args => SaveElementBitmapForCallbackArgs(element, args)); iex.FullScreen = fullScreen; } public static void SaveElementScreenshot(Element element) { SaveElementScreenshot(element, null); } private static void SaveScreenshot(IE browser, string screenshotName, Action<ScreenshotCallbackArgs> screenshotCallback) { string fileName = string.Format("{0:000}{1}{2}.jpg", ++_screenshotCount, (string.IsNullOrEmpty(screenshotName)) ? "" : " ", screenshotName); string path = Path.Combine(ScreenshotDirectoryName, fileName); Console.WriteLine(); // Gallio HTML-encodes the following display, but I have a utility program to // remove the "HTML===" and "===HTML" and un-encode the rest to show images in the Gallio report: Console.WriteLine("HTML===<div><b>{0}:</br></b><img src=\"{1}\" /></div>===HTML", screenshotName, new Uri(path).AbsoluteUri); MakeBrowserWindowTopmost(browser); try { var args = new ScreenshotCallbackArgs { InternetExplorerClass = (InternetExplorerClass)browser.InternetExplorer, ScreenshotPath = path }; Thread.Sleep(100); screenshotCallback(args); } catch (Exception ex) { Console.WriteLine(ex.Message); } } public static void HighlightElement(Element element, bool doHighlight) { if (!element.Exists) return; if (string.IsNullOrEmpty(HighlightCssClassName)) { element.Highlight(doHighlight); return; } string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); string format = (doHighlight) ? "{0}.className += ' {1}'" : "{0}.className = {0}.className.replace(' {1}', '')"; sb.AppendFormat(" " + format + ";", jsRef, HighlightCssClassName); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void ScrollIntoView(Element element) { string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void MakeBrowserWindowTopmost(IE ie) { ie.BringToFront(); SetWindowPos(ie.hWnd, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS); } public static string HighlightCssClassName { get; set; } private static int _screenshotCount; private static string _screenshotDirectoryName; public static string ScreenshotDirectoryName { get { if (_screenshotDirectoryName == null) { var asm = Assembly.GetAssembly(typeof(WatinScreenshotSaver)); var uri = new Uri(asm.CodeBase); var fileInfo = new FileInfo(uri.LocalPath); string directoryName = fileInfo.DirectoryName; _screenshotDirectoryName = Path.Combine( directoryName, string.Format("Screenshots_{0:yyyyMMddHHmm}", DateTime.Now)); Console.WriteLine("Screenshot folder: {0}", _screenshotDirectoryName); Directory.CreateDirectory(_screenshotDirectoryName); } return _screenshotDirectoryName; } set { _screenshotDirectoryName = value; _screenshotCount = 0; } } [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags); private static readonly IntPtr HWND_TOPMOST = new IntPtr(-1); private const UInt32 SWP_NOSIZE = 0x0001; private const UInt32 SWP_NOMOVE = 0x0002; private const UInt32 TOPMOST_FLAGS = SWP_NOMOVE | SWP_NOSIZE; private static IE GetIe(Element element) { if (element == null) return null; var container = element.DomContainer; while (container as IE == null) container = container.DomContainer; return (IE)container; } private static void SaveBitmapForCallbackArgs(ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; SaveBitmap(args.ScreenshotPath, iex.Left, iex.Top, iex.Width, iex.Height); } private static void SaveElementBitmapForCallbackArgs(Element element, ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; Rectangle bounds = GetElementBounds(element); SaveBitmap(args.ScreenshotPath, iex.Left + bounds.Left, iex.Top + bounds.Top, bounds.Width, bounds.Height); } /// <summary> /// This method is used instead of element.NativeElement.GetElementBounds because that /// method has a bug (http://sourceforge.net/tracker/?func=detail&aid=2994660&group_id=167632&atid=843727). /// </summary> private static Rectangle GetElementBounds(Element element) { var ieElem = element.NativeElement as WatiN.Core.Native.InternetExplorer.IEElement; IHTMLElement elem = ieElem.AsHtmlElement; int left = elem.offsetLeft; int top = elem.offsetTop; for (IHTMLElement parent = elem.offsetParent; parent != null; parent = parent.offsetParent) { left += parent.offsetLeft; top += parent.offsetTop; } return new Rectangle(left, top, elem.offsetWidth, elem.offsetHeight); } private static void SaveBitmap(string path, int left, int top, int width, int height) { using (var bitmap = new Bitmap(width, height)) { using (Graphics g = Graphics.FromImage(bitmap)) { g.CopyFromScreen( new Point(left, top), Point.Empty, new Size(width, height) ); } bitmap.Save(path, ImageFormat.Jpeg); } } private class ScreenshotCallbackArgs { public InternetExplorerClass InternetExplorerClass { get; set; } public string ScreenshotPath { get; set; } } } }

    Read the article

  • Securing an ASP.NET MVC 2 Application

    - by rajbk
    This post attempts to look at some of the methods that can be used to secure an ASP.NET MVC 2 Application called Northwind Traders Human Resources.  The sample code for the project is attached at the bottom of this post. We are going to use a slightly modified Northwind database. The screen capture from SQL server management studio shows the change. I added a new column called Salary, inserted some random salaries for the employees and then turned off AllowNulls.   The reporting relationship for Northwind Employees is shown below.   The requirements for our application are as follows: Employees can see their LastName, FirstName, Title, Address and Salary Employees are allowed to edit only their Address information Employees can see the LastName, FirstName, Title, Address and Salary of their immediate reports Employees cannot see records of non immediate reports.  Employees are allowed to edit only the Salary and Title information of their immediate reports. Employees are not allowed to edit the Address of an immediate report Employees should be authenticated into the system. Employees by default get the “Employee” role. If a user has direct reports, they will also get assigned a “Manager” role. We use a very basic empId/pwd scheme of EmployeeID (1-9) and password test$1. You should never do this in an actual application. The application should protect from Cross Site Request Forgery (CSRF). For example, Michael could trick Steven, who is already logged on to the HR website, to load a page which contains a malicious request. where without Steven’s knowledge, a form on the site posts information back to the Northwind HR website using Steven’s credentials. Michael could use this technique to give himself a raise :-) UI Notes The layout of our app looks like so: When Nancy (EmpID 1) signs on, she sees the default page with her details and is allowed to edit her address. If Nancy attempts to view the record of employee Andrew who has an employeeID of 2 (Employees/Edit/2), she will get a “Not Authorized” error page. When Andrew (EmpID 2) signs on, he can edit the address field of his record and change the title and salary of employees that directly report to him. Implementation Notes All controllers inherit from a BaseController. The BaseController currently only has error handling code. When a user signs on, we check to see if they are in a Manager role. We then create a FormsAuthenticationTicket, encrypt it (including the roles that the employee belongs to) and add it to a cookie. private void SetAuthenticationCookie(int employeeID, List<string> roles) { HttpCookiesSection cookieSection = (HttpCookiesSection) ConfigurationManager.GetSection("system.web/httpCookies"); AuthenticationSection authenticationSection = (AuthenticationSection) ConfigurationManager.GetSection("system.web/authentication"); FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket( 1, employeeID.ToString(), DateTime.Now, DateTime.Now.AddMinutes(authenticationSection.Forms.Timeout.TotalMinutes), false, string.Join("|", roles.ToArray())); String encryptedTicket = FormsAuthentication.Encrypt(authTicket); HttpCookie authCookie = new HttpCookie(FormsAuthentication.FormsCookieName, encryptedTicket); if (cookieSection.RequireSSL || authenticationSection.Forms.RequireSSL) { authCookie.Secure = true; } HttpContext.Current.Response.Cookies.Add(authCookie); } We read this cookie back in Global.asax and set the Context.User to be a new GenericPrincipal with the roles we assigned earlier. protected void Application_AuthenticateRequest(Object sender, EventArgs e){ if (Context.User != null) { string cookieName = FormsAuthentication.FormsCookieName; HttpCookie authCookie = Context.Request.Cookies[cookieName]; if (authCookie == null) return; FormsAuthenticationTicket authTicket = FormsAuthentication.Decrypt(authCookie.Value); string[] roles = authTicket.UserData.Split(new char[] { '|' }); FormsIdentity fi = (FormsIdentity)(Context.User.Identity); Context.User = new System.Security.Principal.GenericPrincipal(fi, roles); }} We ensure that a user has permissions to view a record by creating a custom attribute AuthorizeToViewID that inherits from ActionFilterAttribute. public class AuthorizeToViewIDAttribute : ActionFilterAttribute{ IEmployeeRepository employeeRepository = new EmployeeRepository(); public override void OnActionExecuting(ActionExecutingContext filterContext) { if (filterContext.ActionParameters.ContainsKey("id") && filterContext.ActionParameters["id"] != null) { if (employeeRepository.IsAuthorizedToView((int)filterContext.ActionParameters["id"])) { return; } } throw new UnauthorizedAccessException("The record does not exist or you do not have permission to access it"); }} We add the AuthorizeToView attribute to any Action method that requires authorization. [HttpPost][Authorize(Order = 1)]//To prevent CSRF[ValidateAntiForgeryToken(Salt = Globals.EditSalt, Order = 2)]//See AuthorizeToViewIDAttribute class[AuthorizeToViewID(Order = 3)] [ActionName("Edit")]public ActionResult Update(int id){ var employeeToEdit = employeeRepository.GetEmployee(id); if (employeeToEdit != null) { //Employees can edit only their address //A manager can edit the title and salary of their subordinate string[] whiteList = (employeeToEdit.IsSubordinate) ? new string[] { "Title", "Salary" } : new string[] { "Address" }; if (TryUpdateModel(employeeToEdit, whiteList)) { employeeRepository.Save(employeeToEdit); return RedirectToAction("Details", new { id = id }); } else { ModelState.AddModelError("", "Please correct the following errors."); } } return View(employeeToEdit);} The Authorize attribute is added to ensure that only authorized users can execute that Action. We use the TryUpdateModel with a white list to ensure that (a) an employee is able to edit only their Address and (b) that a manager is able to edit only the Title and Salary of a subordinate. This works in conjunction with the AuthorizeToViewIDAttribute. The ValidateAntiForgeryToken attribute is added (with a salt) to avoid CSRF. The Order on the attributes specify the order in which the attributes are executed. The Edit View uses the AntiForgeryToken helper to render the hidden token: ......<% using (Html.BeginForm()) {%><%=Html.AntiForgeryToken(NorthwindHR.Models.Globals.EditSalt)%><%= Html.ValidationSummary(true, "Please correct the errors and try again.") %><div class="editor-label"> <%= Html.LabelFor(model => model.LastName) %></div><div class="editor-field">...... The application uses View specific models for ease of model binding. public class EmployeeViewModel{ public int EmployeeID; [Required] [DisplayName("Last Name")] public string LastName { get; set; } [Required] [DisplayName("First Name")] public string FirstName { get; set; } [Required] [DisplayName("Title")] public string Title { get; set; } [Required] [DisplayName("Address")] public string Address { get; set; } [Required] [DisplayName("Salary")] [Range(500, double.MaxValue)] public decimal Salary { get; set; } public bool IsSubordinate { get; set; }} To help with displaying readonly/editable fields, we use a helper method. //Simple extension method to display a TextboxFor or DisplayFor based on the isEditable variablepublic static MvcHtmlString TextBoxOrLabelFor<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, bool isEditable){ if (isEditable) { return htmlHelper.TextBoxFor(expression); } else { return htmlHelper.DisplayFor(expression); }} The helper method is used in the view like so: <%=Html.TextBoxOrLabelFor(model => model.Title, Model.IsSubordinate)%> As mentioned in this post, there is a much easier way to update properties on an object. Download Demo Project VS 2008, ASP.NET MVC 2 RTM Remember to change the connectionString to point to your Northwind DB NorthwindHR.zip Feedback and bugs are always welcome :-)

    Read the article

  • Bye Bye Year of the Dragon, Hello BPM

    - by Ajay Khanna
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} As 2012 fades and we usher in a New Year, let’s look back at some of the hottest BPM trends and those we’ll be seeing more of in the coming months. BPM is as much about people as it is about technology. As people adopt new ways of engagement, new channels of communications and new devices to interact , the changes are reflected in BPM practices. As Social and Mobile have become an integral part of our personal and professional lives, we’ll see tighter integration of social and mobile with BPM, and more use cases emerging for smarter process management in 2013. And with products and services becoming less differentiated, organizations will strive to differentiate on Customer Experience. Concepts like Pace Layered Architecture and Dynamic Case Management will provide more flexibility and agility to IT groups and knowledge workers. Take a look at some of these capabilities we showcased (see video) at Oracle OpenWorld 2012. Some of these trends that will continue to gain momentum in 2013: Social networks and social media have provided a new way for businesses to engage with customers. A prospect is likely to reach out to their social network before making any purchase. Companies are increasingly engaging with customers in social networks to influence their purchasing decisions, as well as listening to customers via tools like sentiment analysis to see what customers think about a particular product or process. These insights are valuable as companies look to improve their processes. Inside organizations, workers are using social tools to engage with each other to design new products and processes. Social collaboration tools are being used to resolve issues where an employee needs consultation to reach a decision. Oracle BPM Suite includes social interaction as an integral part of its process design and work management to empower today’s business users. Ubiquitous smart mobile devices are trending as a tool of choice for many workers. Many companies are adopting the policy of “Bring Your Own Device,” and the device of choice is a tablet. Devices like smart phones and tablets not only provide mobility to workers and customers, but they also provide additional important information – the context. By integrating the mobile context (location, photos, and preferences) into your processes, organizations can make much more informed decisions, as well as offer more personalized service to customers. Using Oracle ADF Mobile, you can easily create user interfaces for mobile devices and also capture location data for process execution. Customer experience was at the forefront of trending topics in 2012. Organizations are trying to understand their customers better and offer them more personalized and differentiated services. Customer experience is paramount when companies design sales and support processes. Companies are looking to BPM to consistently and efficiently orchestrate customer facing processes across disparate systems, departments and channels of communication. Oracle BPM Suite provides just the right capabilities for organizations to design and deliver an excellent customer experience. Pace Layered Architecture strategy is gaining traction as a way to maximize agility and minimize disruption in organizations. It provides a framework to manage the evolution of your information system when different pieces of it are changing at different rates and need to be updated independent of one another. Oracle Fusion Middleware and Oracle BPM Suite are designed with this in mind. The database layer, integration layer, application layer, and process layer should not be required to change at the same time. Most of the business changes to policy or process can be done at the process layer without disrupting the whole infrastructure. By understanding the type of change needed at a particular level, organizations can become much more agile and efficient. Adaptive Case Management proposes more flexibility to manage processes or cases that do not follow a structured process flow. In such situations, the knowledge worker managing the case needs to evaluate what step should occur next because the sequence of steps can’t be predetermined. Another characteristic is that it requires much more collaboration than straight-through process. As simple processes become automated, and customers adopt more and more self-service, cases that reach the case workers are much more complex and need more investigation. Oracle BPM suite includes comprehensive adaptive case management capability to manage such unstructured and complex processes. Smart BPM or making your BPM intelligent has been the holy grail for BPM practitioners who imagined that one day BPM would become one with Business Intelligence, Business Activity Monitoring and Complex Event Processing, making it much more responsive and helpful in organizational decision making. In 2013, organizations will begin to deploy these intelligent BPM solutions. Oracle offers an integrated solution that brings together the powerful functionality of BI, BAM, event processing, and Real Time Decisions to help organizations create smart process based solutions. In order to help customers reach their BPM goals faster and remove risks associated with BPM initiatives, Oracle has introduced Oracle Process Accelerators, pre-built best practices applications built on Oracle BPM Suite that are fully production grade and ready to deploy. These are exiting times for BPM practitioners and there is so much to look forward to in 2013. We wish you a very happy and prosperous New Year 2013. Happy BPMing!

    Read the article

  • Oracle Data Mining a Star Schema: Telco Churn Case Study

    - by charlie.berger
    There is a complete and detailed Telco Churn case study "How to" Blog Series just posted by Ari Mozes, ODM Dev. Manager.  In it, Ari provides detailed guidance in how to leverage various strengths of Oracle Data Mining including the ability to: mine Star Schemas and join tables and views together to obtain a complete 360 degree view of a customer combine transactional data e.g. call record detail (CDR) data, etc. define complex data transformation, model build and model deploy analytical methodologies inside the Database  His blog is posted in a multi-part series.  Below are some opening excerpts for the first 3 blog entries.  This is an excellent resource for any novice to skilled data miner who wants to gain competitive advantage by mining their data inside the Oracle Database.  Many thanks Ari! Mining a Star Schema: Telco Churn Case Study (1 of 3) One of the strengths of Oracle Data Mining is the ability to mine star schemas with minimal effort.  Star schemas are commonly used in relational databases, and they often contain rich data with interesting patterns.  While dimension tables may contain interesting demographics, fact tables will often contain user behavior, such as phone usage or purchase patterns.  Both of these aspects - demographics and usage patterns - can provide insight into behavior.Churn is a critical problem in the telecommunications industry, and companies go to great lengths to reduce the churn of their customer base.  One case study1 describes a telecommunications scenario involving understanding, and identification of, churn, where the underlying data is present in a star schema.  That case study is a good example for demonstrating just how natural it is for Oracle Data Mining to analyze a star schema, so it will be used as the basis for this series of posts...... Mining a Star Schema: Telco Churn Case Study (2 of 3) This post will follow the transformation steps as described in the case study, but will use Oracle SQL as the means for preparing data.  Please see the previous post for background material, including links to the case study and to scripts that can be used to replicate the stages in these posts.1) Handling missing values for call data recordsThe CDR_T table records the number of phone minutes used by a customer per month and per call type (tariff).  For example, the table may contain one record corresponding to the number of peak (call type) minutes in January for a specific customer, and another record associated with international calls in March for the same customer.  This table is likely to be fairly dense (most type-month combinations for a given customer will be present) due to the coarse level of aggregation, but there may be some missing values.  Missing entries may occur for a number of reasons: the customer made no calls of a particular type in a particular month, the customer switched providers during the timeframe, or perhaps there is a data entry problem.  In the first situation, the correct interpretation of a missing entry would be to assume that the number of minutes for the type-month combination is zero.  In the other situations, it is not appropriate to assume zero, but rather derive some representative value to replace the missing entries.  The referenced case study takes the latter approach.  The data is segmented by customer and call type, and within a given customer-call type combination, an average number of minutes is computed and used as a replacement value.In SQL, we need to generate additional rows for the missing entries and populate those rows with appropriate values.  To generate the missing rows, Oracle's partition outer join feature is a perfect fit.  select cust_id, cdre.tariff, cdre.month, minsfrom cdr_t cdr partition by (cust_id) right outer join     (select distinct tariff, month from cdr_t) cdre     on (cdr.month = cdre.month and cdr.tariff = cdre.tariff);   ....... Mining a Star Schema: Telco Churn Case Study (3 of 3) Now that the "difficult" work is complete - preparing the data - we can move to building a predictive model to help identify and understand churn.The case study suggests that separate models be built for different customer segments (high, medium, low, and very low value customer groups).  To reduce the data to a single segment, a filter can be applied: create or replace view churn_data_high asselect * from churn_prep where value_band = 'HIGH'; It is simple to take a quick look at the predictive aspects of the data on a univariate basis.  While this does not capture the more complex multi-variate effects as would occur with the full-blown data mining algorithms, it can give a quick feel as to the predictive aspects of the data as well as validate the data preparation steps.  Oracle Data Mining includes a predictive analytics package which enables quick analysis. begin  dbms_predictive_analytics.explain(   'churn_data_high','churn_m6','expl_churn_tab'); end; /select * from expl_churn_tab where rank <= 5 order by rank; ATTRIBUTE_NAME       ATTRIBUTE_SUBNAME EXPLANATORY_VALUE RANK-------------------- ----------------- ----------------- ----------LOS_BAND                                      .069167052          1MINS_PER_TARIFF_MON  PEAK-5                   .034881648          2REV_PER_MON          REV-5                    .034527798          3DROPPED_CALLS                                 .028110322          4MINS_PER_TARIFF_MON  PEAK-4                   .024698149          5From the above results, it is clear that some predictors do contain information to help identify churn (explanatory value > 0).  The strongest uni-variate predictor of churn appears to be the customer's (binned) length of service.  The second strongest churn indicator appears to be the number of peak minutes used in the most recent month.  The subname column contains the interior piece of the DM_NESTED_NUMERICALS column described in the previous post.  By using the object relational approach, many related predictors are included within a single top-level column. .....   NOTE:  These are just EXCERPTS.  Click here to start reading the Oracle Data Mining a Star Schema: Telco Churn Case Study from the beginning.    

    Read the article

  • Replacing jQuery.live() with jQuery.on()

    - by Rick Strahl
    jQuery 1.9 and 1.10 have introduced a host of changes, but for the most part these changes are mostly transparent to existing application usage of jQuery. After spending some time last week with a few of my projects and going through them with a specific eye for jQuery failures I found that for the most part there wasn't a big issue. The vast majority of code continues to run just fine with either 1.9 or 1.10 (which are supposed to be in sync but with 1.10 removing support for legacy Internet Explorer pre-9.0 versions). However, one particular change in the new versions has caused me quite a bit of update trouble, is the removal of the jQuery.live() function. This is my own fault I suppose - .live() has been deprecated for a while, but with 1.9 and later it was finally removed altogether from jQuery. In the past I had quite a bit of jQuery code that used .live() and it's one of the things that's holding back my upgrade process, although I'm slowly cleaning up my code and switching to the .on() function as the replacement. jQuery.live() jQuery.live() was introduced a long time ago to simplify handling events on matched elements that exist currently on the document and those that are are added in the future and also match the selector. jQuery uses event bubbling, special event binding, plus some magic using meta data attached to a parent level element to check and see if the original target event element matches the selected selected elements (for more info see Elijah Manor's comment below). An Example Assume a list of items like the following in HTML for example and further assume that the items in this list can be appended to at a later point. In this app there's a smallish initial list that loads to start, and as the user scrolls towards the end of the initial small list more items are loaded dynamically and added to the list.<div id="PostItemContainer" class="scrollbox"> <div class="postitem" data-id="4z6qhomm"> <div class="post-icon"></div> <div class="postitemheader"><a href="show/4z6qhomm" target="Content">1999 Buick Century For Sale!</a></div> <div class="postitemprice rightalign">$ 3,500 O.B.O.</div> <div class="smalltext leftalign">Jun. 07 @ 1:06am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> <div class="postitem" data-id="2jtvuu17"> <div class="postitemheader"><a href="show/2jtvuu17" target="Content">Toyota VAN 1987</a></div> <div class="postitemprice rightalign">$950</div> <div class="smalltext leftalign">Jun. 07 @ 12:29am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> … </div> With the jQuery.live() function you could easily select elements and hook up a click handler like this:$(".postitem").live("click", function() {...}); Simple and perfectly readable. The behavior of the .live handler generally was the same as the corresponding simple event handlers like .click(), except that you have to explicitly name the event instead of using one of the methods. Re-writing with jQuery.on() With .live() removed in 1.9 and later we have to re-write .live() code above with an alternative. The jQuery documentation points you at the .on() or .delegate() functions to update your code. jQuery.on() is a more generic event handler function, and it's what jQuery uses internally to map the high level event functions like .click(),.change() etc. that jQuery exposes. Using jQuery.on() however is not a one to one replacement of the .live() function. While .on() can handle events directly and use the same syntax as .live() did, you'll find if you simply switch out .live() with .on() that events on not-yet existing elements will not fire. IOW, the key feature of .live() is not working. You can use .on() to get the desired effect however, but you have to change the syntax to explicitly handle the event you're interested in on the container and then provide a filter selector to specify which elements you are actually interested in for handling the event for. Sounds more complicated than it is and it's easier to see with an example. For the list above hooking .postitem clicks, using jQuery.on() looks like this:$("#PostItemContainer").on("click", ".postitem", function() {...}); You specify a container that can handle the .click event and then provide a filter selector to find the child elements that trigger the  the actual event. So here #PostItemContainer contains many .postitems, whose click events I want to handle. Any container will do including document, but I tend to use the container closest to the elements I actually want to handle the events on to minimize the event bubbling that occurs to capture the event. With this code I get the same behavior as with .live() and now as new .postitem elements are added the click events are always available. Sweet. Here's the full event signature for the .on() function: .on( events [, selector ] [, data ], handler(eventObject) ) Note that the selector is optional - if you omit it you essentially create a simple event handler that handles the event directly on the selected object. The filter/child selector required if you want life-like - uh, .live() like behavior to happen. While it's a bit more verbose than what .live() did, .on() provides the same functionality by being more explicit on what your parent container for trapping events is. .on() is good Practice even for ordinary static Element Lists As a side note, it's a good practice to use jQuery.on() or jQuery.delegate() for events in most cases anyway, using this 'container event trapping' syntax. That's because rather than requiring lots of event handlers on each of the child elements (.postitem in the sample above), there's just one event handler on the container, and only when clicked does jQuery drill down to find the matching filter element and tries to match it to the originating element. In the early days of jQuery I used manually build handlers that did this and manually drilled from the event object into the originalTarget to determine if it's a matching element. With later versions of jQuery the various event functions in jQuery essentially provide this functionality out of the box with functions like .on() and .delegate(). All of this is nothing new, but I thought I'd write this up because I have on a few occasions forgotten what exactly was needed to replace the many .live() function calls that litter my code - especially older code. This will be a nice reminder next time I have a memory blank on this topic. And maybe along the way I've helped one or two of you as well to clean up your .live() code…© Rick Strahl, West Wind Technologies, 2005-2013Posted in jQuery   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Scott Guthrie in Glasgow

    - by Martin Hinshelwood
    Last week Scott Guthrie was in Glasgow for his new Guathon tour, which was a roaring success. Scott did talks on the new features in Visual Studio 2010, Silverlight 4, ASP.NET MVC 2 and Windows Phone 7. Scott talked from 10am till 4pm, so this can only contain what I remember and I am sure lots of things he discussed just went in one ear and out another, however I have tried to capture at least all of my Ohh’s and Ahh’s. Visual Studio 2010 Right now you can download and install Visual Studio 2010 Candidate Release, but soon we will have the final product in our hands. With it there are some amazing improvements, and not just in the IDE. New versions of VB and C# come out of the box as well as Silverlight 4 and SharePoint 2010 integration. The new Intellisense features allow inline support for Types and Dictionaries as well as being able to type just part of a name and have the list filter accordingly. Even better, and my personal favourite is one that Scott did not mention, and that is that it is not case sensitive so I can actually find things in C# with its reasonless case sensitivity (Scott, can we please have an option to turn that off.) Another nice feature is the Routing engine that was created for ASP.NET MVC is now available for WebForms which is good news for all those that just imported the MVC DLL’s to get at it anyway. Another fantastic feature that will need some exploring is the ability to add validation rules to your entities and have them validated automatically on the front end. This removes the need to add your own validators and means that you can control an objects validation rules from a single location, the object. A simple command “GridView.EnableDynamicData(gettype(product))“ will enable this feature on controls. What was not clear was wither there would be support for this in WPF and WinForms as well. If there is, we can write our validation rules once and use everywhere. I was disappointed to here that there would be no inbuilt support for the Dynamic Language Runtime (DLR) with VS2010, but I think it will be there for .vNext. Because I have been concentrating on the Visual Studio ALM enhancements to VS2010 I found this section invaluable as I now know at least some of what I missed. Silverlight 4 I am not a big fan of Silverlight. There I said it, and I will probably get lynched for it. My big problem with Silverlight is that most of the really useful things I leaned from WPF do not work. I am only going to mention one thing and that is “x:Type”. If you are a WPF developer you will know how much power these 6 little letters provide; the ability to target templates at object types being the the most magical and useful. But, and this is a massive but, if you are developing applications that MUST run on platforms other than windows then Silverlight is your only choice (well that and Flash, but lets just not go there). And Silverlight has a huge install base as well.. 60% of all internet connected devices have Silverlight. Can Adobe say that? Even though I am not a fan of it my current project is a Silverlight one. If you start your XAML experience with Silverlight you will not be disappointed and neither will the users of the applications you build. Scott showed us a fantastic application called “Silverface” that is a Silverlight 4 Out of Browser application. I have looked for a link and can’t find one, but true to form, here is a fantastic WPF version called Fish Bowl from Microsoft. ASP.NET MVC 2 ASP.NET MVC is something I have played with but never used in anger. It is definitely the way forward, but WebForms is not dead yet. there are still circumstances when WebForms are better. If you are starting from greenfield and you are using TDD, then MVC is ultimately the only way you can go. New in version 2 are Dynamic Scaffolding helpers that let you control how data is presented in the UI from the Entities. Adding validation rules and other options that make sense there can help improve the overall ease of developing the UI. Also the Microsoft team have heard the cries of help from the larger site builders and provided “Areas” which allow a level of categorisation to your Controllers and Views. These work just like add-ins and have their own folder, but also have sub Controllers and Views. Areas are totally pluggable and can be dropped onto existing sites giving the ability to have boxed products in MVC, although what you do with all of those views is anyone's guess. They have been listening to everyone again with the new option to encapsulate UI using the Html.Action or Html.ActionRender. This uses the existing  .ascx functionality in ASP.NET to render partial views to the screen in certain areas. While this was possible before, it makes the method official thereby opening it up to the masses and making it a standard. At the end of the session Scott pulled out some IIS goodies including the IIS SEO Toolkit which can be used to verify your own site is “good” for search engine consumption. Better yet he suggested that you run it against your friends sites and shame them with how bad they are. note: make sure you have fixed yours first. Windows Phone 7 Series I had already seen the new UI for WP7 and heard about the developer story, but Scott brought that home by building a twitter application in about 20 minutes using the emulator. Scott’s only mistake was loading @plip’s tweets into the app… And guess what, it was written in Silverlight. When Windows Phone 7 launches you will be able to use about 90% of the codebase of your existing Silverlight application and use it on the phone! There are two downsides to the new WP7 architecture: No, your existing application WILL NOT work without being converted to either a Silverlight or XNA UI. NO, you will not be able to get your applications onto the phone any other way but through the Marketplace. Do I think these are problems? No, not even slightly. This phone is aimed at consumers who have probably never tried to install an application directly onto a device. There will be support for enterprise apps in the future, but for now enterprises should stay on Windows Phone 6.5.x devices. Post Event drinks At the after event drinks gathering Scott was checking out my HTC HD2 (released to the US this month on T-Mobile) and liked the Windows Phone 6.5.5 build I have on it. We discussed why Microsoft were not going to allow Windows Phone 7 Series onto it with my understanding being that it had 5 buttons and not 3, while Scott was sure that there was more to it from a hardware standpoint. I think he is right, and although the HTC HD2 has a DX9 compatible processor, it was never built with WP7 in mind. However, as if by magic Saturday brought fantastic news for all those that have already bought an HD2: Yes, this appears to be Windows Phone 7 running on a HTC HD2. The HD2 itself won't be getting an official upgrade to Windows Phone 7 Series, so all eyes are on the ROM chefs at the moment. The rather massive photos have been posted by Tom Codon on HTCPedia and they've apparently got WiFi, GPS, Bluetooth and other bits working. The ROM isn't online yet but according to the post there's a beta version coming soon. Leigh Geary - http://www.coolsmartphone.com/news5648.html  What was Scott working on on his flight back to the US?   Technorati Tags: VS2010,MVC2,WP7S,WP7 Follow: @CAMURPHY, @ColinMackay, @plip and of course @ScottGu

    Read the article

  • A Guided Tour of Complexity

    - by JoshReuben
    I just re-read Complexity – A Guided Tour by Melanie Mitchell , protégé of Douglas Hofstadter ( author of “Gödel, Escher, Bach”) http://www.amazon.com/Complexity-Guided-Tour-Melanie-Mitchell/dp/0199798109/ref=sr_1_1?ie=UTF8&qid=1339744329&sr=8-1 here are some notes and links:   Evolved from Cybernetics, General Systems Theory, Synergetics some interesting transdisciplinary fields to investigate: Chaos Theory - http://en.wikipedia.org/wiki/Chaos_theory – small differences in initial conditions (such as those due to rounding errors in numerical computation) yield widely diverging outcomes for chaotic systems, rendering long-term prediction impossible. System Dynamics / Cybernetics - http://en.wikipedia.org/wiki/System_Dynamics – study of how feedback changes system behavior Network Theory - http://en.wikipedia.org/wiki/Network_theory – leverage Graph Theory to analyze symmetric  / asymmetric relations between discrete objects Algebraic Topology - http://en.wikipedia.org/wiki/Algebraic_topology – leverage abstract algebra to analyze topological spaces There are limits to deterministic systems & to computation. Chaos Theory definitely applies to training an ANN (artificial neural network) – different weights will emerge depending upon the random selection of the training set. In recursive Non-Linear systems http://en.wikipedia.org/wiki/Nonlinear_system – output is not directly inferable from input. E.g. a Logistic map: Xt+1 = R Xt(1-Xt) Different types of bifurcations, attractor states and oscillations may occur – e.g. a Lorenz Attractor http://en.wikipedia.org/wiki/Lorenz_system Feigenbaum Constants http://en.wikipedia.org/wiki/Feigenbaum_constants express ratios in a bifurcation diagram for a non-linear map – the convergent limit of R (the rate of period-doubling bifurcations) is 4.6692016 Maxwell’s Demon - http://en.wikipedia.org/wiki/Maxwell%27s_demon - the Second Law of Thermodynamics has only a statistical certainty – the universe (and thus information) tends towards entropy. While any computation can theoretically be done without expending energy, with finite memory, the act of erasing memory is permanent and increases entropy. Life & thought is a counter-example to the universe’s tendency towards entropy. Leo Szilard and later Claude Shannon came up with the Information Theory of Entropy - http://en.wikipedia.org/wiki/Entropy_(information_theory) whereby Shannon entropy quantifies the expected value of a message’s information in bits in order to determine channel capacity and leverage Coding Theory (compression analysis). Ludwig Boltzmann came up with Statistical Mechanics - http://en.wikipedia.org/wiki/Statistical_mechanics – whereby our Newtonian perception of continuous reality is a probabilistic and statistical aggregate of many discrete quantum microstates. This is relevant for Quantum Information Theory http://en.wikipedia.org/wiki/Quantum_information and the Physics of Information - http://en.wikipedia.org/wiki/Physical_information. Hilbert’s Problems http://en.wikipedia.org/wiki/Hilbert's_problems pondered whether mathematics is complete, consistent, and decidable (the Decision Problem – http://en.wikipedia.org/wiki/Entscheidungsproblem – is there always an algorithm that can determine whether a statement is true).  Godel’s Incompleteness Theorems http://en.wikipedia.org/wiki/G%C3%B6del's_incompleteness_theorems  proved that mathematics cannot be both complete and consistent (e.g. “This statement is not provable”). Turing through the use of Turing Machines (http://en.wikipedia.org/wiki/Turing_machine symbol processors that can prove mathematical statements) and Universal Turing Machines (http://en.wikipedia.org/wiki/Universal_Turing_machine Turing Machines that can emulate other any Turing Machine via accepting programs as well as data as input symbols) that computation is limited by demonstrating the Halting Problem http://en.wikipedia.org/wiki/Halting_problem (is is not possible to know when a program will complete – you cannot build an infinite loop detector). You may be used to thinking of 1 / 2 / 3 dimensional systems, but Fractal http://en.wikipedia.org/wiki/Fractal systems are defined by self-similarity & have non-integer Hausdorff Dimensions !!!  http://en.wikipedia.org/wiki/List_of_fractals_by_Hausdorff_dimension – the fractal dimension quantifies the number of copies of a self similar object at each level of detail – eg Koch Snowflake - http://en.wikipedia.org/wiki/Koch_snowflake Definitions of complexity: size, Shannon entropy, Algorithmic Information Content (http://en.wikipedia.org/wiki/Algorithmic_information_theory - size of shortest program that can generate a description of an object) Logical depth (amount of info processed), thermodynamic depth (resources required). Complexity is statistical and fractal. John Von Neumann’s other machine was the Self-Reproducing Automaton http://en.wikipedia.org/wiki/Self-replicating_machine  . Cellular Automata http://en.wikipedia.org/wiki/Cellular_automaton are alternative form of Universal Turing machine to traditional Von Neumann machines where grid cells are locally synchronized with their neighbors according to a rule. Conway’s Game of Life http://en.wikipedia.org/wiki/Conway's_Game_of_Life demonstrates various emergent constructs such as “Glider Guns” and “Spaceships”. Cellular Automatons are not practical because logical ops require a large number of cells – wasteful & inefficient. There are no compilers or general program languages available for Cellular Automatons (as far as I am aware). Random Boolean Networks http://en.wikipedia.org/wiki/Boolean_network are extensions of cellular automata where nodes are connected at random (not to spatial neighbors) and each node has its own rule –> they demonstrate the emergence of complex  & self organized behavior. Stephen Wolfram’s (creator of Mathematica, so give him the benefit of the doubt) New Kind of Science http://en.wikipedia.org/wiki/A_New_Kind_of_Science proposes the universe may be a discrete Finite State Automata http://en.wikipedia.org/wiki/Finite-state_machine whereby reality emerges from simple rules. I am 2/3 through this book. It is feasible that the universe is quantum discrete at the plank scale and that it computes itself – Digital Physics: http://en.wikipedia.org/wiki/Digital_physics – a simulated reality? Anyway, all behavior is supposedly derived from simple algorithmic rules & falls into 4 patterns: uniform , nested / cyclical, random (Rule 30 http://en.wikipedia.org/wiki/Rule_30) & mixed (Rule 110 - http://en.wikipedia.org/wiki/Rule_110 localized structures – it is this that is interesting). interaction between colliding propagating signal inputs is then information processing. Wolfram proposes the Principle of Computational Equivalence - http://mathworld.wolfram.com/PrincipleofComputationalEquivalence.html - all processes that are not obviously simple can be viewed as computations of equivalent sophistication. Meaning in information may emerge from analogy & conceptual slippages – see the CopyCat program: http://cognitrn.psych.indiana.edu/rgoldsto/courses/concepts/copycat.pdf Scale Free Networks http://en.wikipedia.org/wiki/Scale-free_network have a distribution governed by a Power Law (http://en.wikipedia.org/wiki/Power_law - much more common than Normal Distribution). They are characterized by hubs (resilience to random deletion of nodes), heterogeneity of degree values, self similarity, & small world structure. They grow via preferential attachment http://en.wikipedia.org/wiki/Preferential_attachment – tipping points triggered by positive feedback loops. 2 theories of cascading system failures in complex systems are Self-Organized Criticality http://en.wikipedia.org/wiki/Self-organized_criticality and Highly Optimized Tolerance http://en.wikipedia.org/wiki/Highly_optimized_tolerance. Computational Mechanics http://en.wikipedia.org/wiki/Computational_mechanics – use of computational methods to study phenomena governed by the principles of mechanics. This book is a great intuition pump, but does not cover the more mathematical subject of Computational Complexity Theory – http://en.wikipedia.org/wiki/Computational_complexity_theory I am currently reading this book on this subject: http://www.amazon.com/Computational-Complexity-Christos-H-Papadimitriou/dp/0201530821/ref=pd_sim_b_1   stay tuned for that review!

    Read the article

  • Overwriting TFS Web Services

    - by javarg
    In this blog I will share a technique I used to intercept TFS Web Services calls. This technique is a very invasive one and requires you to overwrite default TFS Web Services behavior. I only recommend taking such an approach when other means of TFS extensibility fail to provide the same functionality (this is not a supported TFS extensibility point). For instance, intercepting and aborting a Work Item change operation could be implemented using this approach (consider TFS Subscribers functionality before taking this approach, check Martin’s post about subscribers). So let’s get started. The technique consists in versioning TFS Web Services .asmx service classes. If you look into TFS’s ASMX services you will notice that versioning is supported by creating a class hierarchy between different product versions. For instance, let’s take the Work Item management service .asmx. Check the following .asmx file located at: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\_tfs_resources\WorkItemTracking\v3.0\ClientService.asmx The .asmx references the class Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3: <%-- Copyright (c) Microsoft Corporation. All rights reserved. --%> <%@ webservice language="C#" Class="Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The inheritance hierarchy for this service class follows: Note the naming convention used for service versioning (ClientService3, ClientService2, ClientService). We will need to overwrite the latest service version provided by the product (in this case ClientService3 for TFS 2010). The following example intercepts and analyzes WorkItem fields. Suppose we need to validate state changes with more advanced logic other than the provided validations/constraints of the process template. Important: Backup the original .asmx file and create one of your own. Create a Visual Studio Web App Project and include a new ASMX Web Service in the project Add the following references to the project (check the folder %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin\): Microsoft.TeamFoundation.Framework.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.WorkItemTracking.Client.QueryLanguage.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataAccessLayer.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataServices.dll Replace the default service implementation with the something similar to the following code: Code Snippet /// <summary> /// Inherit from ClientService3 to overwrite default Implementation /// </summary> [WebService(Namespace = "http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03", Description = "Custom Team Foundation WorkItemTracking ClientService Web Service")] public class CustomTfsClientService : ClientService3 {     [WebMethod, SoapHeader("requestHeader", Direction = SoapHeaderDirection.In)]     public override bool BulkUpdate(         XmlElement package,         out XmlElement result,         MetadataTableHaveEntry[] metadataHave,         out string dbStamp,         out Payload metadata)     {         var xe = XElement.Parse(package.OuterXml);         // We only intercept WorkItems Updates (we can easily extend this sample to capture any operation).         var wit = xe.Element("UpdateWorkItem");         if (wit != null)         {             if (wit.Attribute("WorkItemID") != null)             {                 int witId = (int)wit.Attribute("WorkItemID");                 // With this Id. I can query TFS for more detailed information, using TFS Client API (assuming the WIT already exists).                 var stateChanged =                     wit.Element("Columns").Elements("Column").FirstOrDefault(c => (string)c.Attribute("Column") == "System.State");                 if (stateChanged != null)                 {                     var newStateName = stateChanged.Element("Value").Value;                     if (newStateName == "Resolved")                     {                         throw new Exception("Cannot change state to Resolved!");                     }                 }             }         }         // Finally, we call base method implementation         return base.BulkUpdate(package, out result, metadataHave, out dbStamp, out metadata);     } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 4. Build your solution and overwrite the original .asmx with the new implementation referencing our new service version (don’t forget to backup it up first). 5. Copy your project’s .dll into the following path: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin 6. Try saving a WorkItem into the Resolved state. Enjoy!

    Read the article

  • Cloud Based Load Testing Using TF Service &amp; VS 2013

    - by Tarun Arora [Microsoft MVP]
    Originally posted on: http://geekswithblogs.net/TarunArora/archive/2013/06/30/cloud-based-load-testing-using-tf-service-amp-vs-2013.aspx One of the new features announced as part of the Visual Studio 2013 Ultimate Preview is ‘Cloud Based Load Testing’. In this blog post I’ll walk you through, What is Cloud Based Load Testing? How have I been using this feature? – Success story! Where can you find more resources on this feature? What is Cloud Based Load Testing? It goes without saying that performance testing your application not only gives you the confidence that the application will work under heavy levels of stress but also gives you the ability to test how scalable the architecture of your application is. It is important to know how much is too much for your application! Working with various clients in the industry I have realized that the biggest barriers in Load Testing & Performance Testing adoption are, High infrastructure and administration cost that comes with this phase of testing Time taken to procure & set up the test infrastructure Finding use for this infrastructure investment after completion of testing Is cloud the answer? 100% Visual Studio Compatible Scalable and Realistic Start testing in < 2 minutes Intuitive Pay only for what you need Use existing on premise tests on cloud There are a lot of vendors out there offering Cloud Based Load Testing, to name a few, Load Storm Soasta Blaze Meter Blitz And others… The question you may want to ask is, why should you go with Microsoft’s Cloud based Load Test offering. If you are a Microsoft shop or already have investments in Microsoft technologies, you’ll see great benefit in the natural integration this offers with existing Microsoft products such as Visual Studio and Windows Azure. For example, your existing Web tests authored in Visual Studio 2010 or Visual Studio 2012 will run on the cloud without requiring any modifications what so ever. Microsoft’s cloud test rig also supports API based testing, for example, if you are building a WPF application which consumes WCF services, you can write unit tests to invoke the WCF service, these tests can be run on the cloud test rig and loaded with ‘N’ concurrent users for performance testing. If you have your assets already hosted in the Azure and possibly in the same data centre as the Cloud test rig, your Azure app will not incur a usage cost because of the generated traffic since the traffic is coming from the same data centre. The licensing or pricing information on Microsoft’s cloud based Load test service is yet to be announced, but I would expect this to be priced attractively to match the market competition.   The only additional configuration required for running load tests on Microsoft Cloud based Load Tests service is to select the Test run location as Run tests using Visual Studio Team Foundation Service, How have I been using Microsoft’s Cloud based Load Test Service? I have been part of the Microsoft Cloud Based Load Test Service advisory council for the last 7 months. This gave the opportunity to see the product shape up from concept to working solution. I was also the first person outside of Microsoft to try this offering out. This gave me the opportunity to test real world application at various clients using the Microsoft Load Test Service and provide real world feedback to the Microsoft product team. One of the most recent systems I tested using the Load Test Service has been an insurance quote generation engine. This insurance quote generation engine is,   hosted in Windows Azure expected to get quote requests from across the globe expected to handle 5 Million quote requests in a day (not clear how this load will be distributed across the day) There was no way, I could simulate such kind of load from on premise without standing up additional hardware. But Microsoft’s Cloud based Load Test service allowed me to test my key performance testing scenarios, i.e. Simulate expected Load, Endurance Testing, Threshold Testing and Testing for Latency. Simulating expected load: approach to devising a load pattern My approach to devising a load test pattern has been to run the test scenario with 1 user to figure out the response time. Then work out how many users are required to reach the target load. So, for example, to invoke 1 quote from the quote engine software takes 0.5 seconds. Now if you do the math,   1 quote request by 1 user = 0.5 seconds   quotes generated by 1 user in 24 hour = 1 * (((2 * 60) * 60) * 24) = 172,800   quotes generated by 30 users in 24 hours = 172,800 * 30 =  5,184,000 This was a very simple example, if your application requires more concurrent users to test scenario’s such as caching, etc then you can devise your own load pattern, some examples of load test patterns can be found here.  Endurance Testing To test for endurance, I loaded the quote generation engine with an expected fixed user load and ran the test for very long duration such as over 48 hours and observed the affect of the long running test on the Azure infrastructure. Currently Microsoft Load Test service does not support metrics from the machine under test. I used Azure diagnostics to begin with, but later started using Cerebrata Azure Diagnostics Manager to capture the metrics of the machine under test. Threshold Testing To figure out how much user load the application could cope with before falling on its belly, I opted to step load the quote generation engine by incrementing user load with different variations of incremental user load per minute till the application crashed out and forced an IIS reset. Testing for Latency Currently the Microsoft Load Test service does not support generating geographically distributed load, I however, deployed the insurance quote generation engine in different Azure data centres and ran the same set of performance tests to measure for latency. Because I could compare load test results from different runs by exporting the results to excel (this feature is provided out of the box right from Visual Studio 2010) I could see the different in response times. More resources on Microsoft Cloud based Load Test Service A few important links to get you started, Download Visual Studio Ultimate 2013 Preview Getting started guide for load testing using Team Foundation Service Troubleshooting guide for FAQs and known issues Team Foundation Service forum for questions and support Detailed demo and presentation (link to Tech-Ed session recording) Detailed demo and presentation (link to Build session recording) There a few limits on the usage of Microsoft Cloud based Load Test service that you can read about here. If you have any feedback on Microsoft Cloud based Load Test service, feel free to share it with the product team via the Visual Studio User Voice forum. I hope you found this useful. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

    Read the article

  • SQL SERVER – 5 Tips for Improving Your Data with expressor Studio

    - by pinaldave
    It’s no secret that bad data leads to bad decisions and poor results.  However, how do you prevent dirty data from taking up residency in your data store?  Some might argue that it’s the responsibility of the person sending you the data.  While that may be true, in practice that will rarely hold up.  It doesn’t matter how many times you ask, you will get the data however they decide to provide it. So now you have bad data.  What constitutes bad data?  There are quite a few valid answers, for example: Invalid date values Inappropriate characters Wrong data Values that exceed a pre-set threshold While it is certainly possible to write your own scripts and custom SQL to identify and deal with these data anomalies, that effort often takes too long and becomes difficult to maintain.  Instead, leveraging an ETL tool like expressor Studio makes the data cleansing process much easier and faster.  Below are some tips for leveraging expressor to get your data into tip-top shape. Tip 1:     Build reusable data objects with embedded cleansing rules One of the new features in expressor Studio 3.2 is the ability to define constraints at the metadata level.  Using expressor’s concept of Semantic Types, you can define reusable data objects that have embedded logic such as constraints for dealing with dirty data.  Once defined, they can be saved as a shared atomic type and then re-applied to other data attributes in other schemas. As you can see in the figure above, I’ve defined a constraint on zip code.  I can then save the constraint rules I defined for zip code as a shared atomic type called zip_type for example.   The next time I get a different data source with a schema that also contains a zip code field, I can simply apply the shared atomic type (shown below) and the previously defined constraints will be automatically applied. Tip 2:     Unlock the power of regular expressions in Semantic Types Another powerful feature introduced in expressor Studio 3.2 is the option to use regular expressions as a constraint.   A regular expression is used to identify patterns within data.   The patterns could be something as simple as a date format or something much more complex such as a street address.  For example, I could define that a valid IP address should be made up of 4 numbers, each 0 to 255, and separated by a period.  So 192.168.23.123 might be a valid IP address whereas 888.777.0.123 would not be.   How can I account for this using regular expressions? A very simple regular expression that would look for any 4 sets of 3 digits separated by a period would be:  ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ Alternatively, the following would be the exact check for truly valid IP addresses as we had defined above:  ^(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])$ .  In expressor, we would enter this regular expression as a constraint like this: Here we select the corrective action to be ‘Escalate’, meaning that the expressor Dataflow operator will decide what to do.  Some of the options include rejecting the offending record, skipping it, or aborting the dataflow. Tip 3:     Email pattern expressions that might come in handy In the example schema that I am using, there’s a field for email.  Email addresses are often entered incorrectly because people are trying to avoid spam.  While there are a lot of different ways to define what constitutes a valid email address, a quick search online yields a couple of really useful regular expressions for validating email addresses: This one is short and sweet:  \b[A-Z0-9._%+-]+@[A-Z0-9.-]+\.[A-Z]{2,4}\b (Source: http://www.regular-expressions.info/) This one is more specific about which characters are allowed:  ^([a-zA-Z0-9_\-\.]+)@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9\-]+\.)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?)$ (Source: http://regexlib.com/REDetails.aspx?regexp_id=26 ) Tip 4:     Reject “dirty data” for analysis or further processing Yet another feature introduced in expressor Studio 3.2 is the ability to reject records based on constraint violations.  To capture reject records on input, simply specify Reject Record in the Error Handling setting for the Read File operator.  Then attach a Write File operator to the reject port of the Read File operator as such: Next, in the Write File operator, you can configure the expressor operator in a similar way to the Read File.  The key difference would be that the schema needs to be derived from the upstream operator as shown below: Once configured, expressor will output rejected records to the file you specified.  In addition to the rejected records, expressor also captures some diagnostic information that will be helpful towards identifying why the record was rejected.  This makes diagnosing errors much easier! Tip 5:    Use a Filter or Transform after the initial cleansing to finish the job Sometimes you may want to predicate the data cleansing on a more complex set of conditions.  For example, I may only be interested in processing data containing males over the age of 25 in certain zip codes.  Using an expressor Filter operator, you can define the conditional logic which isolates the records of importance away from the others. Alternatively, the expressor Transform operator can be used to alter the input value via a user defined algorithm or transformation.  It also supports the use of conditional logic and data can be rejected based on constraint violations. However, the best tip I can leave you with is to not constrain your solution design approach – expressor operators can be combined in many different ways to achieve the desired results.  For example, in the expressor Dataflow below, I can post-process the reject data from the Filter which did not meet my pre-defined criteria and, if successful, Funnel it back into the flow so that it gets written to the target table. I continue to be impressed that expressor offers all this functionality as part of their FREE expressor Studio desktop ETL tool, which you can download from here.  Their Studio ETL tool is absolutely free and they are very open about saying that if you want to deploy their software on a dedicated Windows Server, you need to purchase their server software, whose pricing is posted on their website. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Win a set of Infragistics Silverlight Controls with Data Visualization!

    - by mbcrump
    Infragistics recently released their new Silverlight Data Visualization Controls. I saw a couple of samples and had to take a look. I headed over to their website and downloaded the controls. I first noticed the hospital floor-plan demo shown on their site and started thinking of ways that I could use this in my own organization. I emailed them asking if I could give away the Silverlight Data Visualization controls on my site and they said, Yes! They also wanted to throw in the standard Silverlight Line of Business controls. (combined they are worth about $3000 US). I am very thankful they were willing to help the Silverlight community with this giveaway. So some quick rules below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of Infragistics Silverlight Controls with Data Visualization ($3000 Value) Random winner will be announced on January 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) For extra entries simply: Retweet a link to this page using the following URL [ http://mcrump.me/iscfree ]. It does not matter what the tweet says, just as long as the URL is the same. Unlimited tweets, but please don’t go crazy! This URL will allow me to track the users that Tweet this page. Don’t forget to visit Infragistics because they made this possible. ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The Silverlight Line of Business Control page is here. You can also check out the live demos here. The Data Visualization page is here. You can also check out the live demos here. Don’t worry about the Samples/Help Documentation. You can install all of that to your local HDD when you are installing it. I am going to walk you through the Silverlight Controls recently released by Infragistics. Begin by downloading the trial version and running the executable. If you downloaded the Complete bundle then you will have the following options to pick from. I like having help documentation and samples on my local HDD in case I do not have access to the internet and want to code. After it is installed, you may want to take a look at your Toolbox in Visual Studio 2010. Look for NetAdvantage 10.3 Silverlight and you will see that you now have access to all of these controls. At this point, to use the controls it’s as simple as drag/drop onto your Silverlight container. It will create the proper Namespaces for you. I wanted to highlight a few of the controls that I liked the most: Grid – After using the Infragistics grid you will wonder how you ever survived using the grid supplied by Microsoft standard controls.  This grid was designed to get your application up and running very fast. It’s simple to bind, it handles LARGE DataSets, easy to filter and allows endless possibilities of formatting data. The screenshot below is an example of the grid. For a real-time updating demo click here. SpellChecker- If your users are creating emails or performing any other function that requires Spell Checking then this control is great. Check out the screenshots below: In this first screen, I have a word that is not in the dictionary [DotNet]. The Spell Checker finds the word and allows the user to correct it. What is so great about Infragistics controls is that it only takes a few lines of code to have a full-featured Spell Checker in your application. TagCloud – This is a control that I haven’t seen anywhere else. It allows you to create keywords for popular search terms. This is very similar to TagCloud seen all over the internet.  Below is a screenshot that shows “Facebook” being a very popular item in the cloud. You can link these items to a hyperlink if you wanted. Importing/Exporting from Excel – I work with data a majority of the time. We all know the importance of Excel in our organizations, its used a lot. With Infragistics controls it make importing and exporting data from a Grid into Excel a snap. One of the things that I liked most about this control was the option to choose the Excel format (2003 or 2007). I haven’t seen this feature in other controls. Creating/Saving/Extracting/Uploading Zip Files – This is another control that I haven’t seen many others making. It allows you to basically manipulate a zip file in any way you like. You can even create a password on the zip file. Schedule – The Schedule that Infragistics provides resembles Outlook’s calendar. I think that it’s important for a user to see your app for the first time and immediately be able to start using because they are already familiar with the UI. The Schedule control accomplishes that in my opinion. I have just barely scratched the surface with the Infragistics Silverlight Line of Business controls. To check all of them then click here. A quick thing to note is that this giveaway also comes with the following Silverlight Data Visualization Controls. Below is a screenshot that list all of them:   I wanted to highlight 2 of the controls that I liked the most: xamBarcode– The xamBarcode supports the following Symbologies: Below is an example of the barcode generated by Infragistics controls. This is a high resolution barcode that you will not have to wonder if your scanner can read it. As long as you have ink in your printer your barcode will read it. I used a Symbol barcode reader to test this barcode. xamTreemap– I’ve never seen a way of displaying data like this before, but I like it. You can style this anyway that you like of course and it also comes with an Office 2010 Theme. Thanks to Infragistics for providing the controls to one lucky reader. I hope that you enjoyed this post and good luck to those that entered the contest.  Subscribe to my feed

    Read the article

  • Improving the Industry’s Best Cloud Project Portfolio Management (PPM) Solution – New Release of Instantis EnterpriseTrack

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Yasser Mahmud, Vice President of Product Strategy & Industry Marketing, Oracle Primavera We know that in today’s rapidly changing world, organizations and leaders must adapt to fierce competition, business climate change and customers consistently demanding more for less. And project portfolio management (PPM) initiatives are a key component to help organizations thrive and stand out among competitors. That’s why I’m excited to announce Instantis EnterpriseTrack 8.5. Since Oracle’s acquisition of Instantis late last year, we’ve been busy working to enhance the leading cloud PPM solution. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here’s what’s new: Perform more precise resource planning and management  Gain more precise capacity visibility for resource planning and project execution with resource calendars that capture vacation, LOA and part-time resource availability Ensure compliance and governance processes  with activity labor cost capitalization Improve project labor cost estimation, tracking and administration with variable resource rates Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Optimize Project Demand Management And Execution Enhance productivity and analysis with project request flexible staffing plan and simplified finance estimation Improve project status communication and execution with estimated time to complete (ETC) in timesheets and projects Achieve audit compliance and governance with field change history for key project and project request fields Enforce proper financial accounting processes with the new strict finance lock/close period option Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Improve Reporting and the User Experience Enhance user productivity and analysis with improved listing pages Improve program reporting with new program filters in listing pages and reports Run large data volume user defined Excel reports with MS Excel 2010 support Accelerate user productivity and satisfaction with an improved user interface for project issues, risks, and scope changes Enjoy faster system response and improved user experience with  optimized listing pages, resource planning, and application cache Deliver user self-service training on demand with UPK support And if that wasn’t enough, we’ve also made additional improvements to timesheets, field change history and finance lock/close period. Learn more about Instantis EnterpriseTrack 8.5.

    Read the article

  • CodePlex Daily Summary for Sunday, May 30, 2010

    CodePlex Daily Summary for Sunday, May 30, 2010New ProjectsAviva Solutions C# Coding Guidelines: A set of C# coding guidelines, coding standards, layout rules, FxCop rulesets and (upcoming) custom FxCop and StyleCop rules for improving the over...BKWork: private project.classbook: du an trong vong 10 ngay. Nhom (Do Bao Linh, Phan Thanh Tai, Nguyen Dang Loc)Du an - 01: Du an mon thay LuongEndNote助手: EndNote Helper is a assistant tool for EndNote, which make your task of reference management more convinent. EndNote 助手是一个用于辅助EndNote进行文献管理的小工具,它可...Evoucher: Simple Evoucher Sales SystemFiddler Delayed Responses Extension: A fiddler extension that help developers delay the delivery of HTML Responses to applications. Some delay user stories: - Delivery of css to HTML ...Generic Entity Model 2: GEM2 is lightweight entity framework for building custom business solutions. It enables rapid approach to entity logic design, while offering out o...GY06: 这个是长大工院于2009年发起的项目,因为种种原因没有完成。JoshDOS: JoshDOS is a command line operating system kernel based off COSMOS. It can be booted from actual hardware and built in Visual Studio using .NET la...PhysicsFMUDeluxe.NET: Este projeto é desenvolvido com o intuíto de treinar o desenvolvimento de aplicações em C#. Ele contém ferramentas para cálculos de física e matemá...Reactor Services Platform: Reactor is a service composition and deployment grid that streamlines developing, composing, deploying and managing services. Reactor Services are ...SerafinApartment: Simple MVC 2 application for apartment rental. It is multingual booking system, that allows users to register, book and subscribe for notifications...Silverlight Audio Effect Box: This is a C# Silverlight 4 sample application which process audio sample in near real time. It allows to capture the default audio input device and...Smart Voice: Smart Voice let's you control Skype using your voice. It allows you to write messages, issue phone calls, etc. This application was developed think...WebDotNet - The minimalist web framework inspired by web.py: WebDotNet is an experiment in web frameworks. Inspired by the python web framework, web.py, it is an exercise in extreme minimalism in a framework...New ReleasesAcies: Acies - Alpha Build 0.0.7: Alpha release. Requires Microsoft XNA Framework Redistributable 3.1 (http://www.microsoft.com/downloads/details.aspx?FamilyID=53867a2a-e249-4560-...AdventureWorksLT 2008 Sample Database Script: AdventureWorksLT 2008 R2 DB Script: This script is based on latest download from the Sample database for SQL Server 2008 R2. The original download from the sample is approx 84 MB and ...ASP.NET Wiki Control: Release 1.3.1: - Removed ASP.NET Session dependency. BreadCrumbs will now work with sessions disabled. Can now also share a URL and have the breadcrumb appropriat...Aviva Solutions C# Coding Guidelines: Visual Studio 2010 Rule Sets: Rule Sets targetting different styles of projects.bvcms - Bellevue Church Management System: Source: This source was used to build the latest {church}.bvcms.comCC.Yacht: CC.Yacht 1.0.10.529: This is the initial release of CC.Yacht. Marked as beta since I don't have any testing/feedback beyond that of myself and my wife.Community Forums NNTP bridge: Community Forums NNTP Bridge V14: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V15: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Coronasoft Cryostasis scripting engine: CCSE v0.0.1.0 BETA: This is the 0.0.1.0 Beta Release. If you find any bugs Post them as a comment or in the Discussions tabEndNote助手: EndNote助手2.1.0..0: 去除了注册验证机制。Fiddler Delayed Responses Extension: v0.1: Version 0.1 of Fiddler Delayed Responses Extension. See ChangeLog for more information.Generic Entity Model 2: GEM2 build 52510: This is first BETA release of GEM2! Following implementation is still missing from initial plan: Detailed documentation MySQL operational databa...JoshDOS: JoshDOS Souce: This is the souce for the JoshDOS 1.0 OS kernel. You need the COSMOS user kit to use.JoshDOS: Shell Version 1.0: Whats in this download *JoshDOS user kit *JoshDOS VStudio starter kit *JoshDOS documentation Note: You will need the COSMOS user kit to start deve...miniTodo: mini Todo version 0.3: Todo完了時に音が出なかったのを修正Model Virtual Casting - ASPItalia.com: Model Virtual Casting 0.2: Model Virtual Casting 0.2Questa seconda release di ModelVC è corrispondente a quella mostrata in occasione della Real Code Conference 4.0 tenutasi ...PhysicsFMUDeluxe.NET: PhysicsFMUDeluxe.NET - Setup: Primeira versão pública do PhysicsFMUDeluxe.NETSilverlight Audio Effect Box: Echo Box 1.0: First realease - zip contains : web page + xap file :Smart Voice: Smart Voice 0.1: Here is the first alpha release of Smart Voice. Please remember this was done for a curricular unit project at my university and i understand that ...StyleCop Contrib: Custom rules v0.2: This release of the custom rules target StyleCop 4.3.3. Included rules are: Spacing Rules - NoTrailingWhiteSpace - IndentUsingTabs Ordering Rules ...System.ComponentModel.DataAnnotations Contrib: 0.2.46280.0: Built with Visual Studio 2010/.Net 4.0. Compiled from source code changeset 46280.VB Styler: VB Styler Suite V 1.3.0.0: This is the newest version of the VB Styler. Here are the new features. New Imaging ColorPicker A template for getting colors via sliders ColorR...VCC: Latest build, v2.1.30529.0: Automatic drop of latest buildWPF Application Framework (WAF): WPF Application Framework (WAF) 1.0.0.90 RC: Version: 1.0.0.90 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. ...XNA Collision Detection: XNA Collision Detection Sample Program: I have coded a compact program which shows the collision detection working, and provides a camera class for rendering and moving the "player." Agai...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsAStar.netpatterns & practices – Enterprise LibraryCommunity Forums NNTP bridgeBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationIonics Isapi Rewrite FilterRawrCustomer Portal Accelerator for Microsoft Dynamics CRMFacebook Developer ToolkitPAP

    Read the article

  • A Look Back at 2010 Predictions

    - by David Dorf
    Now is the time of year people make their predictions for next year, but before I start thinking about 2011 it's worth a look back to see how my predictions for 2010 fared. 1. Borders and Blockbuster bite the dust. I would have never predicted a strong brand such as Circuit City could die, but now I know it can happen to anyone. Borders has lost the battle with Barnes & Noble and Blockbuster has lost to Netflix. And just to be sure, Amazon put an extra nail in each coffin. Borders received additional investment from Bennett LeBow to keep it afloat, but the stock is down around $1.25 with no profits in sight. Blockbuster filed for bankruptcy back in September. 2. Every retailer finally has a page on Facebook... but very few figure out how to keep fans engaged. Retailer postings become noise, and fans start to unsubscribe. Twitter goes in the same direction. A few standout retailers will figure out how to use social media, and the rest will remain dumbfounded. Most retailers are on the Facebook bandwagon, and their fan bases seem to be increasing thanks to promotions like The Gap's logo redesign, Lowes' black Friday sneak peak, and Walmart's Crowd Savers. There are several examples of f-commerce advancements, including some interesting integrations from Amazon.3. Smartphones consolidate and grow. More and more people will step-up to smartphones, most of which will choose iPhone, Blackberry, and Android phones. Other smartphones will vanish, and networks will start to strain. But retailers will finally embrace mobile as the next big channel. Retail marketing departments will build mobile apps without the help of their IT department, and eventually they will get into a bind. Android has been on a tear lately stealing market share from Blackberry. Palm and Microsoft are trending down, and Apple is holding steady. Smartphone sales are up 15% and expected to continue. Retailers understand the importance of mobile, and some innovative applications have been produced this year. 4. Google helps the little guys. Google will push its Favorite Places project to help give exposure to small retailers and restaurants. They will enable small retailers to act like big ones by providing storefronts, detailed product information, and coupons for consumers. Google will find a way to bring augmented reality to the masses. I can't say I've seen much new from Google regarding Favorite Places, but they've continued to push local product search. From the PC or smartphone, consumers can search for products and see which nearby stores have it stock. Oracle Retail even productized an integration to Google to support this effort. I suppose if Google ever buys Groupon then it will bring them even closer to local shopping. Google talked about augmented humanity, but that has nothing to do with augmented reality. 5. Steve Jobs Is Bugs Bunny and Steve Ballmer is Elmer Fudd. (OK, I stole that headline from an InformationWeek article. I couldn't resist.) Both Apple and Microsoft will continue to open new stores, but only Apple will show real growth. POSReady 2009 (formerly WEPOS) will continue to share the POS market with Linux. The iPhone and iPod will continue to capture market share, but there won't be an Apple tablet. There won't be an Apple tablet? What was I thinking? While Apple has well over 300 stores, there are less than 10 Microsoft stores. Initial impressions show that even though Microsoft is locating its store near Apple Stores, they are not converting customers, with shoppers citing a lack of assortment and high prices. 6. Consolidation of e-commerce software providers. Software vendors in the areas of search, reviews, online call-centers, payments, and e-commerce will consolidate, partly driven by the success of m-commerce and SaaS. Amazon will find someone else to buy, and eBay will continue to lose momentum. Consolidation of e-commerce providers continued with IBM acquiring Sterling Commerce and CoreMetrics, and Oracle recently announcing the acquisition of ATG. Amazon grabbed Zappos, Woot, and Diapers.com to continue its dominance of online selling. While eBay's Marketplace growth may have slowed, its PayPal division is doing quite well, fueled in part by demand for mobile payments. 7. Book publishers mirror music labels. Just as the iPod brought digital downloads to the masses, the Kindle and Nook will power the e-book revolution. Books will continue to use DRM for a few more years before following the path of music. Publishers will try to preserve the margins of hardbacks by associating e-book releases with paperbacks. Amazon has done a good job providing e-reader clients for smartphones, PCs, and tablets. Competition from Barnes & Noble has forced Amazon to support book loaning, and both companies are making it easier for people to publish ebooks (with or without DRM). Progress is slow but steady. 8. NFC makes inroads, RFID treads water. Near Field Communications start to appear in mobile phones, and retailers beta test its use for payments and loyalty programs. RFID tag costs come down a bit, but not enough to spur accelerated adoption.Nokia announced plans to offer NFC-enabled phones in 2011, and rumors are swirling about NFC in the upcoming iPhone.  I think NFC is heading in the right direction, and I've heard more interest from retailers about specialized uses for RFID.9. Digital Signage goes the way of augmented reality. People use their camera phones to leave geo-tagged notes all over cities, rating stores and restaurants, and "painting" graffiti. But people get tired of holding their phones in front of their faces, so AR glasses are offered in much the same way bluetooth headsets emerged. Retailers experiement with in-store advertising using AR. Several retailers like Pizza Hut, Benetton, and Target have experimented with AR but its still somewhat of a gimmick used by marketing.  I think this prediction is a year or two too early. 10. JDA flip-flops again. After announcing their embracing of the .Net architecture, then switching to J2EE after the Manugistics acquisition, JDA will finally decide to standardize on Apple's Objective C. Everything will be ported to the iPhone and be available on the AppStore. After all, there's not much left to try. This was, of course, a joke but the sentiment is still valid.  JDA seems more supply-chain focused than retail focused, which is a an outcrop if their i2 acquisition.  Of the 10 predictions, I'm going to say I got 6 somewhat correct.  (Don't you just love grading your own paper?)  Soon I'll post my predictions for 2011 so be on the lookout.  Until then here's one more prediction:  Va Tech beats Stanford in the Orange Bowl -- count on it!

    Read the article

  • PeopleSoft Upgrades, Fusion, & BI for Leading European PeopleSoft Applications Customers

    - by Mark Rosenberg
    With so many industry-leading services firms around the globe managing their businesses with PeopleSoft, it’s always an adventure setting up times and meetings for us to keep in touch with them, especially those outside of North America who often do not get to join us at Oracle OpenWorld. Fortunately, during the first two weeks of May, Nigel Woodland (Oracle’s Service Industries Director for the EMEA region) and I successfully blocked off our calendars to visit seven different customers spanning four countries in Western Europe. We met executives and leaders at four Staffing industry firms, two Professional Services firms that engage in consulting and auditing, and a Financial Services firm. As we shared the latest information regarding product capabilities and plans, we also gained valuable insight into the hot technology topics facing these businesses. What we heard was both informative and inspiring, and I suspect other Oracle PeopleSoft applications customers can benefit from one or more of the following observations from our trip. Great IT Plans Get Executed When You Respect the Users Each of our visits followed roughly the same pattern. After introductions, Nigel outlined Oracle’s product and technology strategy, including a discussion of how we at Oracle invest in each layer of the “technology stack” to provide customers with unprecedented business management capabilities and choice. Then, I provided the specifics of the PeopleSoft product line’s investment strategy, detailing the dramatic number of rich usability and functionality enhancements added to release 9.1 since its general availability in 2009 and the game-changing capabilities slated for 9.2. What was most exciting about each of these discussions was that shortly after my talking about what customers can do with release 9.1 right now to drive up user productivity and satisfaction, I saw the wheels turning in the minds of our audiences. Business analyst and end user-configurable tools and technologies, such as WorkCenters and the Related Action Framework, that provide the ability to tailor a “central command center” to the exact needs of each recruiter, biller, and every other role in the organization were exactly what each of our customers had been looking for. Every one of our audiences agreed that these tools which demonstrate a respect for the user would finally help IT pole vault over the wall of resistance that users had often raised in the past. With these new user-focused capabilities, IT is positioned to definitively partner with the business, instead of drag the business along, to unlock the value of their investment in PeopleSoft. This topic of respecting the user emerged during our very first visit, which was at Vital Services Group at their Head Office “The Mill” in Manchester, England. (If you are a student of architecture and are ever in Manchester, you should stop in to see this amazingly renovated old mill building.) I had just finished explaining our PeopleSoft 9.2 roadmap, and Mike Code, PeopleSoft Systems Manager for this innovative staffing company, said, “Mark, the new features you’ve shown us in 9.1/9.2 are very relevant to our business. As we forge ahead with the 9.1 upgrade, the ability to configure a targeted user interface with WorkCenters, Related Actions, Pivot Grids, and Alerts will enable us to satisfy the business that this upgrade is for them and will deliver tangible benefits. In fact, you’ve highlighted that we need to start talking to the business to keep up the momentum to start reviewing the 9.2 upgrade after we get to 9.1, because as much as 9.1 and PeopleTools 8.52 offers, what you’ve shown us for 9.2 is what we’ve envisioned was ultimately possible with our investment in PeopleSoft applications.” We also received valuable feedback about our investment for the Staffing industry when we visited with Hans Wanders, CIO of Randstad (the second largest Staffing company in the world) in the Netherlands. After our visit, Hans noted, “It was very interesting to see how the PeopleSoft applications have developed. I was truly impressed by many of the new developments.” Hans and Mike, sincere thanks for the validation that our team’s hard work and dedication to “respecting the users” is worth the effort! Co-existence of PeopleSoft and Fusion Applications Just Makes Sense As a “product person,” one of the most rewarding things about visiting customers is that they actually want to talk to me. Sometimes, they want to discuss a product area that we need to enhance; other times, they are interested in learning how to extract more value from their applications; and still others, they want to tell me how they are using the applications to drive real value for the business. During this trip, I was very pleased to hear that several of our customers not only thought the co-existence of Fusion applications alongside PeopleSoft applications made sense in theory, but also that they were aggressively looking at how to deploy one or more Fusion applications alongside their PeopleSoft HCM and FSCM applications. The most common deployment plan in the works by three of the organizations is to upgrade to PeopleSoft 9.1 or 9.2, and then adopt one of the new Fusion HCM applications, such as Fusion Performance Management or the full suite of  Fusion Talent Management. For example, during an applications upgrade planning discussion with the staffing company Hays plc., Mark Thomas, who is Hays’ UK IT Director, commented, “We are very excited about where we can go with the latest versions of the PeopleSoft applications in conjunction with Fusion Talent Management.” Needless to say, this news was very encouraging, because it reiterated that our applications investment strategy makes good business sense for our customers. Next Generation Business Intelligence Is the Key to the Future The third, and perhaps most exciting, lesson I learned during this journey is that our audiences already know that the latest generation of Business Intelligence technologies will be the “secret sauce” for organizations to transform business in radical ways. While a number of the organizations we visited on the trip have deployed or are deploying Oracle Business Intelligence Enterprise Edition and the associated analytics applications to provide dashboards of easy-to-understand, user-configurable metrics that help optimize business performance according to current operating procedures, what’s most exciting to them is being able to use Business Intelligence to change the way an organization does business, grows revenue, and makes a profit. In particular, several executives we met asked whether we can help them minimize the need to have perfectly structured data and at the same time generate analytics that improve order fulfillment decision-making. To them, the path to future growth lies in having the ability to analyze unstructured data rapidly and intuitively and leveraging technology’s ability to detect patterns that a human cannot reasonably be expected to see. For illustrative purposes, here is a good example of a business problem where analyzing a combination of structured and unstructured data can produce better results. If you have a resource manager trying to decide which person would be the best fit for an assignment in terms of ensuring (a) client satisfaction, (b) the individual’s satisfaction with the work, (c) least travel distance, and (d) highest margin, you traditionally compare resource qualifications to assignment needs, calculate margins on past work with the client, and measure distances. To perform these comparisons, you are likely to need the organization to have profiles setup, people ranked against profiles, margin targets setup, margins measured, distances setup, distances measured, and more. As you can imagine, this requires organizations to plan and implement data setup, capture, and quality management initiatives to ensure that dependable information is available to support resourcing analysis and decisions. In the fast-paced, tight-budget world in which most organizations operate today, the effort and discipline required to maintain high-quality, structured data like those described in the above example are certainly not desirable and in some cases are not feasible. You can imagine how intrigued our audiences were when I informed them that we are ready to help them analyze volumes of unstructured data, detect trends, and produce recommendations. Our discussions delved into examples of how the firms could leverage Oracle’s Secure Enterprise Search and Endeca technologies to keyword search against, compare, and learn from unstructured resource and assignment data. We also considered examples of how they could employ Oracle Real-Time Decisions to generate statistically significant recommendations based on similar resourcing scenarios that have produced the desired satisfaction and profit margin results. --- Although I had almost no time for sight-seeing during this trip to Europe, I have to say that it may have been one of the most energizing and engaging trips of my career. Showing these dedicated customers how they can give every user a uniquely tailored set of tools and address business problems in ways that have to date been impossible made the journey across the Atlantic more than worth it. If any of these three topics intrigue you, I’d recommend you contact your Oracle applications representative to arrange for more detailed discussions with the appropriate members of our organization.

    Read the article

  • How to launch LOV and Date dialogs using the keyboard

    - by frank.nimphius
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Using the ADF Faces JavaScript API, developers can listen for user keyboard input in input components to filter or respond to specific characters or key combination. The JavaScript shown below can be used with an af:clientListener tag on af:inputListOfValues or af:inputDate. At runtime, the JavaScript code determines the component type it is executed on and either opens the LOV dialog or the input Date popup.   <af:resource type="javascript">     /**     * function to launch dialog if cursor is in LOV or     * input date field     * @param evt argument to capture the AdfUIInputEvent object     */   function launchPopUpUsingF8(evt) {      var component = evt.getSource();      if (evt.getKeyCode() == AdfKeyStroke.F8_KEY) {      //check for input LOV component        if (component.getTypeName() == 'AdfRichInputListOfValues') {            AdfLaunchPopupEvent.queue(component, true);            //event is handled on the client. Server does not need            //to be notified            evt.cancel();          }         //check for input Date component               else if (component.getTypeName() == 'AdfRichInputDate') {           //the inputDate af:popup component ID always is ::pop           var popupClientId = component.getAbsoluteLocator() + '::pop';           var popup = component.findComponent(popupClientId);           var hints = {align : AdfRichPopup.ALIGN_END_AFTER,                        alignId : component.getAbsoluteLocator()};           popup.show(hints);           //event is handled on the client. Server does not need           //to be notified           evt.cancel();        }              } } </af:resource> The af:clientListener that calls the JavaScript is added as shown below. <af:inputDate label="Label 1" id="id1">    <af:clientListener method="launchPopUpUsingF8" type="keyDown"/> </af:inputDate> As you may have noticed, the call to open the popup is different for the af:inputListOfValues and the af:inputDate. For the list of values component, an ADF Faces AdfLaunchPopupEvent is queued with the LOV component passed s an argument. Launching the input date popup is a bit more complicate and requires you to lookup the implicit popup dialog and to open it manually. Because the popup is opened manually using the show() method on the af:popup component, the alignment of the dialog also needs to be handled manually. For this, the popup component specifies alignment hints, that for the ALIGN_END_AFTER hint aligns the dialog at the end and below the date component. The align Id hint specifies the component the dialog is relatively positioned to, which of course should be the input date field. The ADF Faces JavaScript API and how to use it is further explained in the Using JavaScript in ADF Faces Rich Client Applications whitepaper available from the Oracle Technology Network (OTN) http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf An ADF Insider recording about JavaScript in ADF Faces can be watched from here http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adf-insider-javascript/adf-insider-javascript.html

    Read the article

  • The APEX of Business Value...or...the Business Value of APEX? Oracle Cloud Takes Oracle APEX to New Heights!

    - by Gene Eun
    The attraction of Oracle Application Express (APEX) has increased tremendously with the recent launch of the Oracle Cloud. APEX already supported departmental development and deployment of business applications with minimal involvement from the IT department. Positioned as the ideal replacement for MS Access, APEX probably has managed better to capture the eye of developers and was used for enterprise application development at least as much as for the kind of tactical applications that Oracle strategically positioned it for. With APEX as PaaS from the Oracle Cloud, a leap is made to a much higher level of business value. Now the IT department is not even needed to make infrastructure available with a database running  on it. All the business needs is a credit card. And the business application that is developed, managed and used from the cloud through a standard browser can now just as easily be accessed by users from around the world as by users from the business department itself. As a bonus – the development of the APEX application is also done in the cloud – with no special demands on the location or the enterprise access privileges of the developers. To sum it up: APEX from Oracle Cloud Database Service get the development environment up and running in minutes no involvement from the internal IT department required (not for infrastructure, platform, or development) superior availability and scalability is offered by Oracle users from anywhere in the world can be invited to access the application developers from anywhere in the world can participate in creating and maintaining the application In addition: because the Oracle Cloud platform is the same as the on-premise platform, you can still decide to move the APEX application between the cloud and the local environment – and back again. The REST-ful services that are available through APEX allow programmatic interaction with the database under the APEX application. That means that this database can be synchronized with on premise databases or data stores in (other) clouds. Through the Oracle Cloud Messaging Service, the APEX application can easily enter into asynchronous conversations with other APEX applications, Fusion Middleware applications (ADF, SOA, BPM) and any other type of REST-enabled application. In my opinion, now, for the first time perhaps, APEX offers the attraction to the business that has been suggested before: because of the cloud, all the business needs is  a credit card (a budget of $175 per month), an internet-connection and a browser. Not like before, with a PC hidden under a desk or a database running somewhere in the data center. No matter how unattended: equipment is needed, power is consumed, the database needs to be kept running and if Oracle Database XE does not suffice, software licenses are required as well. And this set up always has a security challenge associated with it. The cloud fee for the Oracle Cloud Database Service includes infrastructure, power, licenses, availability, platform upgrades, a collection of reusable application components and the development and runtime environments containing the APEX platform. Of course this not only means that business departments can move quickly without having to convince their IT colleagues to move along – it also means that small organizations that do not even have IT colleagues can do the same. Getting tailored applications or applications up and running to get in touch with users and customers all over the world is now within easy reach for small outfits – without any investment. My misunderstanding For a long time, I was under the impression that the essence of APEX was that the business could create applications themselves – meaning that business ‘people’ would actually go into APEX to create the application. To me APEX was too much of a developers’ tool to see that happen – apart from the odd business analyst who missed his or her calling as an IT developer. Having looked at various other cloud based development offerings – including Force.com, Mendix, WaveMaker, WorkXpress, OrangeScape, Caspio and Cordys- I have come to realize my mistake. All these platforms are positioned for 'the business' but require a fair amount of coding and technical expertise. However, they make the business happy nevertheless, because they allow the  business to completely circumvent the IT department. That is the essence. Not having to go through the red tape, not having to wait for IT staff who (justifiably) need weeks or months to provide an environment, not having to deal with administrators (again, justifiably) refusing to take on that 'strange environment'. Being able to think of an initiative and turn into action right away. The business does not have to build the application - it can easily hire some external developers or even that nerdy boy next door. They can get started, get an application up and running and invite users in – especially external users such as customers. They will worry later about upgrades and life cycle management and integration. To get applications up and running quickly and start turning ideas into action and results rightaway. That is the key selling point for all these cloud offerings, including APEX from the Cloud. And it is a compelling story. For APEX probably even more so than for the others. While I consider APEX a somewhat proprietary framework compared with ‘regular’ Java/JEE web development (or even .NET and PHP  development), it is still far more open than most cloud environments. APEX is SQL and PL/SQL based – nothing special about those languages – and can run just as easily on site as in the cloud. It has been around since 2004 (that is not including several predecessors that fed straight into APEX) so it can be considered pretty mature. Oracle as a company seems pretty stable – so investments in its technology are bound to last for some time to come. By the way: neither APEX nor the other Cloud DevaaS offerings are targeted at creating applications with enormous life times. They fit into a trend of agile development and rapid life cycle management, with fairly light weight user interfaces that quickly adapt to taste, technology trends and functional requirements and that are easily replaced. APEX and ADF – a match made in heaven?! (or at least in the sky) Note that using APEX only for cloud based database with REST-ful Services is also a perfectly viable scenario: any UI – mobile or browser based – capable of consuming REST-ful services can be created against such a business tier. Creating an ADF Mobile application for example that runs aginst REST-ful services is a best practice for mobile development. Such REST-ful services can be consumed from any service provider – including the Cloud based APEX powered REST-ful services running against the Oracle Cloud Database Service! The ADF Mobile architecture overview can easily be morphed to fit the APEX services in – allowing for a cloud based mobile app: Want to learn more about Oracle Database Cloud Service or Oracle Cloud, just visit cloud.oracle.com  or oracle.com/cloud. Repost of a blog entry by Rick Greenwald, Director of Product Management, Oracle Database Cloud Service.

    Read the article

  • Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

    - by Asian Angel
    This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

    Read the article

  • SQL Server Split() Function

    - by HighAltitudeCoder
    Title goes here   Ever wanted a dbo.Split() function, but not had the time to debug it completely?  Let me guess - you are probably working on a stored procedure with 50 or more parameters; two or three of them are parameters of differing types, while the other 47 or so all of the same type (id1, id2, id3, id4, id5...).  Worse, you've found several other similar stored procedures with the ONLY DIFFERENCE being the number of like parameters taped to the end of the parameter list. If this is the situation you find yourself in now, you may be wondering, "why am I working with three different copies of what is basically the same stored procedure, and why am I having to maintain changes in three different places?  Can't I have one stored procedure that accomplishes the job of all three? My answer to you: YES!  Here is the Split() function I've created.    /******************************************************************************                                       Split.sql   ******************************************************************************/ /******************************************************************************   Split a delimited string into sub-components and return them as a table.   Parameter 1: Input string which is to be split into parts. Parameter 2: Delimiter which determines the split points in input string. Works with space or spaces as delimiter. Split() is apostrophe-safe.   SYNTAX: SELECT * FROM Split('Dvorak,Debussy,Chopin,Holst', ',') SELECT * FROM Split('Denver|Seattle|San Diego|New York', '|') SELECT * FROM Split('Denver is the super-awesomest city of them all.', ' ')   ******************************************************************************/ USE AdventureWorks GO   IF EXISTS       (SELECT *       FROM sysobjects       WHERE xtype = 'TF'       AND name = 'Split'       ) BEGIN       DROP FUNCTION Split END GO   CREATE FUNCTION Split (       @InputString                  VARCHAR(8000),       @Delimiter                    VARCHAR(50) )   RETURNS @Items TABLE (       Item                          VARCHAR(8000) )   AS BEGIN       IF @Delimiter = ' '       BEGIN             SET @Delimiter = ','             SET @InputString = REPLACE(@InputString, ' ', @Delimiter)       END         IF (@Delimiter IS NULL OR @Delimiter = '')             SET @Delimiter = ','   --INSERT INTO @Items VALUES (@Delimiter) -- Diagnostic --INSERT INTO @Items VALUES (@InputString) -- Diagnostic         DECLARE @Item                 VARCHAR(8000)       DECLARE @ItemList       VARCHAR(8000)       DECLARE @DelimIndex     INT         SET @ItemList = @InputString       SET @DelimIndex = CHARINDEX(@Delimiter, @ItemList, 0)       WHILE (@DelimIndex != 0)       BEGIN             SET @Item = SUBSTRING(@ItemList, 0, @DelimIndex)             INSERT INTO @Items VALUES (@Item)               -- Set @ItemList = @ItemList minus one less item             SET @ItemList = SUBSTRING(@ItemList, @DelimIndex+1, LEN(@ItemList)-@DelimIndex)             SET @DelimIndex = CHARINDEX(@Delimiter, @ItemList, 0)       END -- End WHILE         IF @Item IS NOT NULL -- At least one delimiter was encountered in @InputString       BEGIN             SET @Item = @ItemList             INSERT INTO @Items VALUES (@Item)       END         -- No delimiters were encountered in @InputString, so just return @InputString       ELSE INSERT INTO @Items VALUES (@InputString)         RETURN   END -- End Function GO   ---- Set Permissions --GRANT SELECT ON Split TO UserRole1 --GRANT SELECT ON Split TO UserRole2 --GO   The syntax is basically as follows: SELECT <fields> FROM Table 1 JOIN Table 2 ON ... JOIN Table 3 ON ... WHERE LOGICAL CONDITION A AND LOGICAL CONDITION B AND LOGICAL CONDITION C AND TABLE2.Id IN (SELECT * FROM Split(@IdList, ',')) @IdList is a parameter passed into the stored procedure, and the comma (',') is the delimiter you have chosen to split the parameter list on. You can also use it like this: SELECT <fields> FROM Table 1 JOIN Table 2 ON ... JOIN Table 3 ON ... WHERE LOGICAL CONDITION A AND LOGICAL CONDITION B AND LOGICAL CONDITION C HAVING COUNT(SELECT * FROM Split(@IdList, ',') Similarly, it can be used in other aggregate functions at run-time: SELECT MIN(SELECT * FROM Split(@IdList, ','), <fields> FROM Table 1 JOIN Table 2 ON ... JOIN Table 3 ON ... WHERE LOGICAL CONDITION A AND LOGICAL CONDITION B AND LOGICAL CONDITION C GROUP BY <fields> Now that I've (hopefully effectively) explained the benefits to using this function and implementing it in one or more of your database objects, let me warn you of a caveat that you are likely to encounter.  You may have a team member who waits until the right moment to ask you a pointed question: "Doesn't this function just do the same thing as using the IN function?  Why didn't you just use that instead?  In other words, why bother with this function?" What's happening is, one or more team members has failed to understand the reason for implementing this kind of function in the first place.  (Note: this is THE MOST IMPORTANT ASPECT OF THIS POST). Allow me to outline a few pros to implementing this function, so you may effectively parry this question.  Touche. 1) Code consolidation.  You don't have to maintain what is basically the same code and logic, but with varying numbers of the same parameter in several SQL objects.  I'm not going to go into the cons related to using this function, because the afore mentioned team member is probably more than adept at pointing these out.  Remember, the real positive contribution is ou are decreasing the liklihood that your team fails to update all (x) duplicate copies of what are basically the same stored procedure, and so on...  This is the classic downside to duplicate code.  It is a virus, and you should kill it. You might be better off rejecting your team member's question, and responding with your own: "Would you rather maintain the same logic in multiple different stored procedures, and hope that the team doesn't forget to always update all of them at the same time?".  In his head, he might be thinking "yes, I would like to maintain several different copies of the same stored procedure", although you probably will not get such a direct response.  2) Added flexibility - you can use the Split function elsewhere, and for splitting your data in different ways.  Plus, you can use any kind of delimiter you wish.  How can you know today the ways in which you might want to examine your data tomorrow?  Segue to my next point. 3) Because the function takes a delimiter parameter, you can split the data in any number of ways.  This greatly increases the utility of such a function and enables your team to work with the data in a variety of different ways in the future.  You can split on a single char, symbol, word, or group of words.  You can split on spaces.  (The list goes on... test it out). Finally, you can dynamically define the behavior of a stored procedure (or other SQL object) at run time, through the use of this function.  Rather than have several objects that accomplish almost the same thing, why not have only one instead?

    Read the article

  • CodePlex Daily Summary for Sunday, May 16, 2010

    CodePlex Daily Summary for Sunday, May 16, 2010New Projects3D Calculator: 3D Calc is a simple calculator application for Windows Phone 7, the purpose of this project is to demo the 3D animations capabilities of WP7 and sh...azaleas: AzaleasBlueset Studio Opensource Projects: Only for Opensource projects form Blueset Studio.Breck: A Phoenix and Jumper Moneky Production: Breck is a first person non-violent shooter developed in C++ and Dark GDK. After the main game is developed we are looking into making a sequel or...Discuz! Forum SDK: This project is use to login in and post or reply topic on discuz forum.Dominion.NET: Evolving Dominion source code originally written in VB6 and posted by "jatill" on Collectible Card Game Headquarters. Migration of the design and s...EkspSys2010-ITR: A mini project for the course Experimental System devolopment in spring 2010Facebook Graph Toolkit: This project is a .Net implementation of the Facebook Graph API. The aim of this project is to be a replacement to the existing Facebook Toolkit (h...iFree: This is a solution for Vietnamese network socialInfoPath Editor for Developer: InfoPath Editor for developer allows user to modify the html text directly inside InfoPath designer or filler and push the change back to InfoPath ...iZeit: Run your own online calendar, with blog integration, recurrence, todo list and categories.machgos dotNet Tests: Just some little test-projects for learningmim: TBAMinePost: MinePost is a game made for the first 48 hour Reddit Game Jam.Mockina: Mockina is a mock framework. Expression tree syntax is used to specify which members to mock, both public and non-public. The code is easy to under...MSBuild Launch Pad (mPad): This is just another shell extension for MSBuild to enable quick execution of MSBuild scripts via Windows Explorer context menu. (C) 2010 Lex LiPeacock: A browser like tabbed applicationPrimeCalculation: PrimeCalculation is a .NET app to calculate primes in a given range. Speed on Core2Duo 2,4GHZ: Found all primes from 0 to 1 billion in 35 seconds (...Slightly Silverlight: A Framework that leverages Silverlight for processing, business logic but standard HTML for the presentation layer.Stopwatch: Stopwatch is a tool for measuring the time. To start and pause stopwatch you only need to press a key on the keyboard. An additional context menu a...YAXLib: Yet Another XML Serialization Library for the .NET Framework: YAXLib is an XML Serialization library which helps you structure freely the XML result, choose among private and public fields to be serialized, an...New ReleasesActivate Your Glutes: v1.0.3.0: This release is a migration to VS2010, .Net 4, MVC2 and Entity Framework 4. The code has also been considerably cleaned up - taking advantage of E...AnyCAD: AnyCAD.Free.ENU.v1.1: http://www.anycad.net Modeling •2D: Line, Rectangle, Arc, Arch, Circle, Spline, Polygon •Feature: Extrude, Loft, Chamfer, Sweep, Revol •Boolean: ...Blueset Studio Opensource Projects: 多功能计算器 3.5: 稳定版本。Code for Rapid C# Windows Development eBook: LLBLGen LINQPad Data Context Driver Ver 1.0.0.0: First release of a Static LLBLGen Pro Data Context Driver for LINQPad I recommend LINQPad 4 as it seems more stable with this driver than LINQPad 2.DSQLT - Dynamic SQL Templates: Release 1.2. Some behaviour has changed!!: Attention. Some behaviour has changed! Now its necessary to use WildCards in the pattern-parameter for DSQLT.AllSourceContains DSQLT.Databases DSQ...FDS AutoCAD plug-in: FDS to AutoCAD plug-in: Basic functionality was implemented. Some routines like setting fds executable location are still not automated.Feature Builder Guidance Extensions: FBGX 2 - Standalone FX: Background: The Feature Builder Guidance is extensible and displays guidance content supplied by all the Feature Builder Guidance Extensions (FBGX...Floe IRC Client: Floe IRC Client 2010-05 R3: - You can now right click on the input box to get options for toggling bold, underline, colors, etc. - The size of the nickname column is now saved...Floe IRC Client: Floe IRC Client 2010-05 R4: - A user's channel status now appears next to their nick when they talk (e.g. @Nick or +Nick) - Fixed an error where certain kinds of network probl...HD-Trailers.NET Downloader: HD-Trailers.NET Downloader v1.0: Version 1.0 Thanks to Wolfgang for all his help. I let this project languish for too long while focusing on other things, but his involvement has ...InfoPath Editor for Developer: InfoPath Editor Beta 1: Intial Release: Can load InfoPath inner html. Can edit InfoPath inner html. InfoPath 2007 only.LinkSharp: LinkSharp 0.1.0: First release of LinkSharp. Set up iis, and use the sql script to create a new database.PowerAuras: PowerAuras V3.0.0F: This version adds better integration with GTFO New Flags Added PvP flag In 5-Man Instance In Raid Instance In Battleground In ArenaRx Contrib: V1.4: Add the ability to catch internal exception and the ability to publish error by queue adaptersSEO SiteMap: SEO SiteMap RC1: -SevenZipLib Library: v9.13.2: Stable release associated with 7z.dll 9.13 beta. Ability to create and update archives not implemente yet.Silverlight / WPF Controls: Upload, FlipPanel, DeepZoom, Animation, Encryption: Code Camp Demonstration: This code example demonstrates MVVM/MEF with WPF with attached properties,security and custom ICommand class.SQL Data Capture - Black Box Application Testing: SQLDataCapture V1.2: Added Entity Framework Support to CRUD generator (Insert Stored Procedure) and switched to VS 2010 for development.Stopwatch: Stopwatch 0.1: Stopwatch Release 0.1VCC: Latest build, v2.1.30515.0: Automatic drop of latest buildYet another developer blog - Examples: Asynchronous TreeView in ASP.NET MVC: This sample application shows how to use jQuery TreeView plugin for creating an asynchronous TreeView in ASP.NET MVC. This application is accompani...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrPHPExcelBlogEngine.NETMicrosoft Biology FoundationCustomer Portal Accelerator for Microsoft Dynamics CRMWindows Azure Command-line Tools for PHP DevelopersMirror Testing SystemN2 CMSStyleCop

    Read the article

  • June 2013 Release of the Ajax Control Toolkit

    - by Stephen.Walther
    I’m happy to announce the June 2013 release of the Ajax Control Toolkit. For this release, we enhanced the AjaxFileUpload control to support uploading files directly to Windows Azure. We also improved the SlideShow control by adding support for CSS3 animations. You can get the latest release of the Ajax Control Toolkit by visiting the project page at CodePlex (http://AjaxControlToolkit.CodePlex.com). Alternatively, you can execute the following NuGet command from the Visual Studio Library Package Manager window: Uploading Files to Azure The AjaxFileUpload control enables you to efficiently upload large files and display progress while uploading. With this release, we’ve added support for uploading large files directly to Windows Azure Blob Storage (You can continue to upload to your server hard drive if you prefer). Imagine, for example, that you have created an Azure Blob Storage container named pictures. In that case, you can use the following AjaxFileUpload control to upload to the container: <toolkit:ToolkitScriptManager runat="server" /> <toolkit:AjaxFileUpload ID="AjaxFileUpload1" StoreToAzure="true" AzureContainerName="pictures" runat="server" /> Notice that the AjaxFileUpload control is declared with two properties related to Azure. The StoreToAzure property causes the AjaxFileUpload control to upload a file to Azure instead of the local computer. The AzureContainerName property points to the blob container where the file is uploaded. .int3{position:absolute;clip:rect(487px,auto,auto,444px);}SMALL cash advance VERY CHEAP To use the AjaxFileUpload control, you need to modify your web.config file so it contains some additional settings. You need to configure the AjaxFileUpload handler and you need to point your Windows Azure connection string to your Blob Storage account. <configuration> <appSettings> <!--<add key="AjaxFileUploadAzureConnectionString" value="UseDevelopmentStorage=true"/>--> <add key="AjaxFileUploadAzureConnectionString" value="DefaultEndpointsProtocol=https;AccountName=testact;AccountKey=RvqL89Iw4npvPlAAtpOIPzrinHkhkb6rtRZmD0+ojZupUWuuAVJRyyF/LIVzzkoN38I4LSr8qvvl68sZtA152A=="/> </appSettings> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> You supply the connection string for your Azure Blob Storage account with the AjaxFileUploadAzureConnectionString property. If you set the value “UseDevelopmentStorage=true” then the AjaxFileUpload will upload to the simulated Blob Storage on your local machine. After you create the necessary configuration settings, you can use the AjaxFileUpload control to upload files directly to Azure (even very large files). Here’s a screen capture of how the AjaxFileUpload control appears in Google Chrome: After the files are uploaded, you can view the uploaded files in the Windows Azure Portal. You can see that all 5 files were uploaded successfully: New AjaxFileUpload Events In response to user feedback, we added two new events to the AjaxFileUpload control (on both the server and the client): · UploadStart – Raised on the server before any files have been uploaded. · UploadCompleteAll – Raised on the server when all files have been uploaded. · OnClientUploadStart – The name of a function on the client which is called before any files have been uploaded. · OnClientUploadCompleteAll – The name of a function on the client which is called after all files have been uploaded. These new events are most useful when uploading multiple files at a time. The updated AjaxFileUpload sample page demonstrates how to use these events to show the total amount of time required to upload multiple files (see the AjaxFileUpload.aspx file in the Ajax Control Toolkit sample site). SlideShow Animated Slide Transitions With this release of the Ajax Control Toolkit, we also added support for CSS3 animations to the SlideShow control. The animation is used when transitioning from one slide to another. Here’s the complete list of animations: · FadeInFadeOut · ScaleX · ScaleY · ZoomInOut · Rotate · SlideLeft · SlideDown You specify the animation which you want to use by setting the SlideShowAnimationType property. For example, here is how you would use the Rotate animation when displaying a set of slides: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ShowSlideShow.aspx.cs" Inherits="TestACTJune2013.ShowSlideShow" %> <%@ Register TagPrefix="toolkit" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <script runat="Server" type="text/C#"> [System.Web.Services.WebMethod] [System.Web.Script.Services.ScriptMethod] public static AjaxControlToolkit.Slide[] GetSlides() { return new AjaxControlToolkit.Slide[] { new AjaxControlToolkit.Slide("slides/Blue hills.jpg", "Blue Hills", "Go Blue"), new AjaxControlToolkit.Slide("slides/Sunset.jpg", "Sunset", "Setting sun"), new AjaxControlToolkit.Slide("slides/Winter.jpg", "Winter", "Wintery..."), new AjaxControlToolkit.Slide("slides/Water lilies.jpg", "Water lillies", "Lillies in the water"), new AjaxControlToolkit.Slide("slides/VerticalPicture.jpg", "Sedona", "Portrait style picture") }; } </script> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="Rotate" runat="server" /> </div> </form> </body> </html> In the code above, the set of slides is exposed by a page method named GetSlides(). The SlideShowAnimationType property is set to the value Rotate. The following animated GIF gives you an idea of the resulting slideshow: If you want to use either the SlideDown or SlideRight animations, then you must supply both an explicit width and height for the Image control which is the target of the SlideShow extender. For example, here is how you would declare an Image and SlideShow control to use a SlideRight animation: <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Width="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="SlideRight" runat="server" /> Notice that the Image control includes both a Height and Width property. Here’s an approximation of this animation using an animated GIF: Summary The Superexpert team worked hard on this release. We hope you like the new improvements to both the AjaxFileUpload and the SlideShow controls. We’d love to hear your feedback in the comments. On to the next sprint!

    Read the article

  • Can't log in to GNOME after upgrade (raring -> saucy)

    - by x-yuri
    I've just upgraded my ubuntu (raring to saucy) and I now can't log in to GNOME. As opposed to virtual consoles (Ctrl-Alt-F1, for example). I set it up to log in automatically. But it asks for password now. I type in the password, press Enter, the screen blinks and here I am again at the login screen. Then I looked into /var/log/Xorg.0.log: [ 33.956] Initializing built-in extension DRI2 [ 33.956] (II) LoadModule: "glx" [ 33.956] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 33.956] (II) Module glx: vendor="X.Org Foundation" [ 33.956] compiled for 1.14.3, module version = 1.0.0 [ 33.956] ABI class: X.Org Server Extension, version 7.0 [ 33.956] (==) AIGLX enabled [ 33.956] Loading extension GLX [ 33.956] (==) Matched fglrx as autoconfigured driver 0 [ 33.956] (==) Matched ati as autoconfigured driver 1 [ 33.956] (==) Matched fglrx as autoconfigured driver 2 [ 33.956] (==) Matched ati as autoconfigured driver 3 [ 33.956] (==) Matched vesa as autoconfigured driver 4 [ 33.956] (==) Matched modesetting as autoconfigured driver 5 [ 33.956] (==) Matched fbdev as autoconfigured driver 6 [ 33.956] (==) Assigned the driver to the xf86ConfigLayout [ 33.956] (II) LoadModule: "fglrx" [ 33.957] (WW) Warning, couldn't open module fglrx [ 33.957] (II) UnloadModule: "fglrx" [ 33.957] (II) Unloading fglrx [ 33.957] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 33.957] (II) LoadModule: "ati" [ 33.957] (WW) Warning, couldn't open module ati [ 33.957] (II) UnloadModule: "ati" [ 33.957] (II) Unloading ati [ 33.957] (EE) Failed to load module "ati" (module does not exist, 0) [ 33.957] (II) LoadModule: "vesa" [ 33.957] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 33.957] (II) Module vesa: vendor="X.Org Foundation" [ 33.957] compiled for 1.14.1, module version = 2.3.2 [ 33.957] Module class: X.Org Video Driver [ 33.957] ABI class: X.Org Video Driver, version 14.1 [ 33.957] (II) LoadModule: "modesetting" [ 33.957] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 33.957] (II) Module modesetting: vendor="X.Org Foundation" [ 33.957] compiled for 1.14.1, module version = 0.8.0 [ 33.957] Module class: X.Org Video Driver [ 33.957] ABI class: X.Org Video Driver, version 14.1 [ 33.957] (II) LoadModule: "fbdev" [ 33.957] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 33.958] (II) Module fbdev: vendor="X.Org Foundation" [ 33.958] compiled for 1.14.1, module version = 0.4.3 [ 33.958] Module class: X.Org Video Driver [ 33.958] ABI class: X.Org Video Driver, version 14.1 [ 33.958] (==) Matched fglrx as autoconfigured driver 0 [ 33.958] (==) Matched ati as autoconfigured driver 1 [ 33.958] (==) Matched fglrx as autoconfigured driver 2 [ 33.958] (==) Matched ati as autoconfigured driver 3 [ 33.958] (==) Matched vesa as autoconfigured driver 4 [ 33.958] (==) Matched modesetting as autoconfigured driver 5 [ 33.958] (==) Matched fbdev as autoconfigured driver 6 [ 33.958] (==) Assigned the driver to the xf86ConfigLayout [ 33.958] (II) LoadModule: "fglrx" [ 33.958] (WW) Warning, couldn't open module fglrx [ 33.958] (II) UnloadModule: "fglrx" [ 33.958] (II) Unloading fglrx [ 33.958] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 33.958] (II) LoadModule: "ati" [ 33.958] (WW) Warning, couldn't open module ati [ 33.958] (II) UnloadModule: "ati" [ 33.958] (II) Unloading ati [ 33.958] (EE) Failed to load module "ati" (module does not exist, 0) [ 33.958] (II) LoadModule: "vesa" [ 33.958] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 33.958] (II) Module vesa: vendor="X.Org Foundation" [ 33.958] compiled for 1.14.1, module version = 2.3.2 [ 33.958] Module class: X.Org Video Driver [ 33.958] ABI class: X.Org Video Driver, version 14.1 [ 33.958] (II) UnloadModule: "vesa" [ 33.958] (II) Unloading vesa [ 33.958] (II) Failed to load module "vesa" (already loaded, 0) [ 33.958] (II) LoadModule: "modesetting" [ 33.959] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 33.959] (II) Module modesetting: vendor="X.Org Foundation" [ 33.959] compiled for 1.14.1, module version = 0.8.0 [ 33.959] Module class: X.Org Video Driver [ 33.959] ABI class: X.Org Video Driver, version 14.1 [ 33.959] (II) UnloadModule: "modesetting" [ 33.959] (II) Unloading modesetting [ 33.959] (II) Failed to load module "modesetting" (already loaded, 0) [ 33.959] (II) LoadModule: "fbdev" [ 33.959] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 33.959] (II) Module fbdev: vendor="X.Org Foundation" [ 33.959] compiled for 1.14.1, module version = 0.4.3 [ 33.959] Module class: X.Org Video Driver [ 33.959] ABI class: X.Org Video Driver, version 14.1 [ 33.959] (II) UnloadModule: "fbdev" [ 33.959] (II) Unloading fbdev [ 33.959] (II) Failed to load module "fbdev" (already loaded, 0) [ 33.959] (II) VESA: driver for VESA chipsets: vesa [ 33.959] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 33.959] (II) FBDEV: driver for framebuffer: fbdev [ 33.959] (++) using VT number 7 If I install fglrx, it reads: [ 37.152] Initializing built-in extension DRI2 [ 37.152] (II) LoadModule: "glx" [ 37.152] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so [ 37.152] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 37.152] compiled for 6.9.0, module version = 1.0.0 [ 37.152] Loading extension GLX [ 37.153] (==) Matched fglrx as autoconfigured driver 0 [ 37.153] (==) Matched ati as autoconfigured driver 1 [ 37.153] (==) Matched vesa as autoconfigured driver 2 [ 37.153] (==) Matched modesetting as autoconfigured driver 3 [ 37.153] (==) Matched fbdev as autoconfigured driver 4 [ 37.153] (==) Assigned the driver to the xf86ConfigLayout [ 37.153] (II) LoadModule: "fglrx" [ 37.153] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 37.168] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 37.168] compiled for 1.4.99.906, module version = 13.10.10 [ 37.168] Module class: X.Org Video Driver [ 37.168] (II) Loading sub module "fglrxdrm" [ 37.168] (II) LoadModule: "fglrxdrm" [ 37.168] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so [ 37.169] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc." [ 37.169] compiled for 1.4.99.906, module version = 13.10.10 [ 37.169] (II) LoadModule: "ati" [ 37.169] (WW) Warning, couldn't open module ati [ 37.169] (II) UnloadModule: "ati" [ 37.169] (II) Unloading ati [ 37.169] (EE) Failed to load module "ati" (module does not exist, 0) [ 37.169] (II) LoadModule: "vesa" [ 37.169] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 37.169] (II) Module vesa: vendor="X.Org Foundation" [ 37.169] compiled for 1.14.1, module version = 2.3.2 [ 37.169] Module class: X.Org Video Driver [ 37.169] ABI class: X.Org Video Driver, version 14.1 [ 37.169] (II) LoadModule: "modesetting" [ 37.170] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 37.170] (II) Module modesetting: vendor="X.Org Foundation" [ 37.170] compiled for 1.14.1, module version = 0.8.0 [ 37.170] Module class: X.Org Video Driver [ 37.170] ABI class: X.Org Video Driver, version 14.1 [ 37.170] (II) LoadModule: "fbdev" [ 37.170] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 37.170] (II) Module fbdev: vendor="X.Org Foundation" [ 37.170] compiled for 1.14.1, module version = 0.4.3 [ 37.170] Module class: X.Org Video Driver [ 37.170] ABI class: X.Org Video Driver, version 14.1 [ 37.170] (==) Matched fglrx as autoconfigured driver 0 [ 37.170] (==) Matched ati as autoconfigured driver 1 [ 37.170] (==) Matched vesa as autoconfigured driver 2 [ 37.170] (==) Matched modesetting as autoconfigured driver 3 [ 37.170] (==) Matched fbdev as autoconfigured driver 4 [ 37.170] (==) Assigned the driver to the xf86ConfigLayout [ 37.170] (II) LoadModule: "fglrx" [ 37.170] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so [ 37.170] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc." [ 37.170] compiled for 1.4.99.906, module version = 13.10.10 [ 37.170] Module class: X.Org Video Driver [ 37.170] (II) LoadModule: "ati" [ 37.170] (WW) Warning, couldn't open module ati [ 37.170] (II) UnloadModule: "ati" [ 37.171] (II) Unloading ati [ 37.171] (EE) Failed to load module "ati" (module does not exist, 0) [ 37.171] (II) LoadModule: "vesa" [ 37.171] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 37.171] (II) Module vesa: vendor="X.Org Foundation" [ 37.171] compiled for 1.14.1, module version = 2.3.2 [ 37.171] Module class: X.Org Video Driver [ 37.171] ABI class: X.Org Video Driver, version 14.1 [ 37.171] (II) UnloadModule: "vesa" [ 37.171] (II) Unloading vesa [ 37.171] (II) Failed to load module "vesa" (already loaded, 0) [ 37.171] (II) LoadModule: "modesetting" [ 37.171] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 37.171] (II) Module modesetting: vendor="X.Org Foundation" [ 37.171] compiled for 1.14.1, module version = 0.8.0 [ 37.171] Module class: X.Org Video Driver [ 37.171] ABI class: X.Org Video Driver, version 14.1 [ 37.171] (II) UnloadModule: "modesetting" [ 37.171] (II) Unloading modesetting [ 37.171] (II) Failed to load module "modesetting" (already loaded, 0) [ 37.171] (II) LoadModule: "fbdev" [ 37.171] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 37.171] (II) Module fbdev: vendor="X.Org Foundation" [ 37.171] compiled for 1.14.1, module version = 0.4.3 [ 37.171] Module class: X.Org Video Driver [ 37.171] ABI class: X.Org Video Driver, version 14.1 [ 37.171] (II) UnloadModule: "fbdev" [ 37.171] (II) Unloading fbdev [ 37.171] (II) Failed to load module "fbdev" (already loaded, 0) [ 37.171] (II) AMD Proprietary Linux Driver Version Identifier:13.10.10 [ 37.171] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.101 [ 37.171] (II) AMD Proprietary Linux Driver Build Date: May 23 2013 15:49:35 [ 37.171] (II) VESA: driver for VESA chipsets: vesa [ 37.171] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 37.171] (II) FBDEV: driver for framebuffer: fbdev [ 37.171] (++) using VT number 7 I did more installing/removing packages than that. There were a moment when it said: (EE) Failed to load /usr/lib64/xorg/modules/libglamoregl.so: /usr/lib64/xorg/modules/libglamoregl.so: undefined symbol: _glapi_tls_Context Also there is init: not found in ~/.xsession-errors: /usr/sbin/lightdm-session: 5: exec: init: not found Actually, I'm out of ideas. What about you? :)

    Read the article

< Previous Page | 156 157 158 159 160 161 162 163 164 165 166 167  | Next Page >