Search Results

Search found 5521 results on 221 pages for 'deeper understanding'.

Page 162/221 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Weird rendering artefact in vim (terminal, not MacVim)

  - by Tobi Lehman

  Running Mac OS X, using either Terminal.app or iTerm2, there is a strange artefact with the character rendering that I have a hard time explaining and an even harder time understanding. I'll start with a video of my screen so that you can see and example of it in action: From the video you can see a few ways it is weird, for example, sometimes when I hit a letter in insert mode, the character is double printed. When I go into normal mode, the artefact remains. When I re-enter insert mode, hitting backspace copies the characters on the left to the position under the cursor. This has happened in OS X Lion, and Mountain Lion, under both Terminal.app and iTerm 2. This never happens under MacVim. Also, I use GNU/Linux on my other machine, and have never had this happen, I am pretty sure it is strictly a Mac OS X issue, but I do not know how to fix it. For a while, I've been working around it by using MacVim most of the time, but I prefer working in a terminal. Does anyone know what is happening here, and if so, how can I fix it? EDIT: I tried using the macvim Vim executable, and I still get strange artefacts, but they are localized to the left side of the screen, here is an example:

  Read the article

• Batch Script to Trim lines in text to first 30 or 50 characters only

  - by SuperUserMan

  I am now new to scripts but i find it really difficult understanding "for" command (especially with that tokens and delimiters etc) . Saying so, i think that for command can be used to do what i am doing. If its not and there is an easier way, ignore my ignorance :( Say i have multiple lines in a text file abc.txt with each line starting and ending with " (quotes) E.g. a file of 3 lines "hey what is going on @mike220. I am working on your car. Its engine is in very bad condition" "Because if you knew, you'd get shredded and do it with certainty" "@honey220 Do you know someone who has busted their ass on a diet only for results to come to a screeching halt after a few weeks" How can i trim each line, within the quotes, to a Fixed length say 30 or 50 or 100 characters (including spaces) I want to enter the number of character in batch and it can trim accordingly and produce a file def.txt with trimmed lines within quotes. Say i enter 50, results of above example should be "hey what is going on @mike220. I am working on you" "Because if you knew, you'd get shredded and do it" "@honey220 Do you know someone who has busted their" Thanks P.S. if you use For command, kindly please explain the command. EDIT: Though the answer provided worked, there is an issue with non english text. I am getting garbled text in Output file for non english text in input file . Any help @barlop here is the nonenglish text ( 1 line) "???? ?? ???? ?? ???? ???? ??? ?????? ???"

  Read the article

• SQL Server 2000, large transaction log, almost empty, performance issue?

  - by Mafu Josh

  For a company that I have been helping troubleshoot their database. In SQL Server 2000, database is about 120 gig. Something caused the transaction log to grow MUCH larger than normal to over 100 gig, some hung transaction that didn't commit or roll back for a few days. That has been resolved and it now stays around 1% full or less, due to its hourly transaction log backups. It IS my understanding that a GROWING transaction log file size can cause performance issues. But what I am a little paranoid about is the size. Although mainly empty, MIGHT it be having a negative effect on performance? But I haven't found any documentation that suggests this is true. I did find this link: http://www.bigresource.com/MS_SQL-Large-Transaction-Log-dramatically-Slows-down-processing-any-idea-why--2ahzP5wK.html but in this post I can't tell if their log was full or empty, and there is not any replies to the post in this link. So I am guessing it is not a problem, anyone know for sure?

  Read the article

• How to have LiveJournal delegate my OpenID to something else?

  - by T-Boy

  I understand that if I have full control over my domain, I can set it up so that I can delegate the task of authenticating to another OpenID service provider. The problem is, what I'd like to do is to get the LiveJournal server to pass the authentication to someone else, instead of having LJ doing it. Preferably what I'd like to do is get LiveJournal, when asked by a web site, say, "No, I don't do it anymore -- go to this address". The plan was that this address would then be in a domain I fully control, which then would pass it on to whichever service provider I choose. I don't even know if I've gotten my understanding of OpenID right, if all this shenanigans are necessary, if my question makes sense, or if it's even possible with a service provider like Livejournal. ETA: Doing a little more reading up, and examining the source for my LiveJournal user page, I note that this particular line in the file's <header> area: <link rel="openid.server" href="http://www.livejournal.com/openid/server.bml" /> I suspect that changing this will allow me to forward OpenID requests to whomever I wish, I think; so far so good. Now comes the hard part -- figuring out how to change all of that using LiveJournal's customization options, if that is at all possible (here's hoping I don't need to pay to get that functionality).

  Read the article

• Getting Started in SuSE as an Ubuntu User

  - by Subhamoy Sengupta

  I am not a Linux newbie, but haven't touched SuSE in a very very long time (last time I tried it, it was SuSE 7!). Finally now I felt like giving it a try, and many things seem strange or unnecessarily complex. I have a series of questions. How do I ensure that my packages are uptodate? It sounds silly, but I tried the obvious methods already. I have disabled the default repositories that show up when you do zypper lr, and added Tumbleweed and packman repositories (Essentials, Multimedia, Extra). Then I did a sudo zypper ref --force and then sudo zypper dup, and it tells me many dependencies are not met. I have already added solder.allowVendorChange=true to /etc/zypp/zypp.conf, so it should not care which repository the latest versions are in, and just upgrade to it. Even when I chose to skip the packages with unmet dependencies, and seemed like quite a bit happened in the background, I opened Firefox afterwards and the version was 7! I am guessing things did not go as expected. But of course this is not a problem with SuSE, but I am not understanding the system right. How do I do it right? When I start typing arguments of a command, for example sudo zypper install, when I type sudo zypper ins and keep hitting TAB, nothing happens! It always worked in Ubuntu and I feel very uneasy with this. Is this how SuSE is supposed to be? When I try to install something, and I start writing its name, even though the package exists and I am sure of it, hitting TAB does not autocomplete it. This is also quite inconvenient. Why is it not happening? There are many things in SuSE that are really great, and I think I will stay with it and not go back to Ubuntu once I settle these very rudimentary issues. But right now they are giving me a lot of grief! Please help!

  Read the article

• Clarification On Write-Caching Policy, Its Underlying Options And How It Applies To Hard Drives And Solid-State Drives

  - by Boris_yo

  In last week after doing more research on subject matter, I have been wondering about what I have been neglecting all those years to understand write-caching policy, always leaving it on default setting. Write-caching policy improves writing performance and consists of write-back caching and write-cache buffer flushing. This is how I understand all the above, but correct me if I erred somewhere: Write-through cache / Write-through caching itself is not a part of write caching policy per se and it's when data is written to both cache and storage device so if Windows will need that data later again, it is retrieved from cache and not from storage device which means only improved read performance as there is no need for waiting for storage device to read required data again. Since data is still written to storage device, write performance isn't improved and represents no risk of data loss or corruption in case of power failure or system crash while only data in cache gets lost. This option seems to be enabled by default and is recommended for removable devices with no need to use function of "Safely Remove Hardware" on user's part. Write-back caching is similar to above but without writing data to storage device, periodically releasing data from cache and writing to storage device when it is idle. In my opinion this option improves both read and write performance but represents risk if power failure or system crash occurs with the outcome of not only losing data eventually to be written to storage device, but causing file inconsistencies or corrupted file system. Write-back caching cannot be enabled together with write-through caching and it is not recommended to be enabled if no backup power supply is availabe. Write-cache buffer flushing I reckon is similar to write-back caching but enables immediate release and writing of data from cache to storage device right before power outage occurs but I don't know if it applies also to occasional system crash. This option seem to be complementary to write-back cache reducing or potentially eliminating risk of data loss or corruption of file system. I have questions about relevance of last 2 options to today's modern SSDs in order to get best performance and with less wear on SSDs: I know that traditional hard drives come with onboard cache (I wonder what type of cache that is), but do SSDs also come with cache? Assuming they do, is this cache faster than their NAND flash and system RAM and worth taking the risk of utilizing it by enabling write-back cache? I read somewhere that generally storage device's cache is faster than RAM, but I want to be sure. Additionally I read that write-caching should be enabled since current data that is to be written later to NAND flash is kept for a while in cache and provided there is data that gets modified a lot before finally being written, holding of this data and its periodic release reduces its write times to SSD thereby reducing its wearing. Now regarding to write-cache buffer flushing, I heard that SSD controllers are so fast by themselves that enabling this option is not required, because they manage flushing. However, once again, I don't know if SSDs have their own onboard cache and whether or not it is faster than their NAND flash and system RAM because if it is, keeping this option enabled would make sense. Recently I have posted question about issue with my Intel 330 SSD 120GB which was main reason to do deeper research having suspicion of write-caching policy being the culprit of SSD's freezing issue assuming data being released is what causes freezes. Currently I have write-cache enabled and write-cache buffer flushing disabled because I believe SSD controller's management of write-cache flushing and Windows write-cache buffer flushing are conflicting with each other: Since I want to troubleshoot in small steps to finally determine the source of issue, I have decided to start with write-caching policy and the move to drivers, switching to AHCI later on and finally disabling DIPM (device initiated power management) through registry modification thanks to @TomWijsman

  Read the article

• Simple electric DC question. Current consumption

  - by Bobb

  Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

  Read the article

• Why does BitLocker need a minimum volume size of 64 MB?

  - by Iszi

  Since the future of TrueCrypt appears to be still unclear, I figured I'd try to get my stuff migrated into BitLocker at least for the time being. I nearly never have to access my encrypted data from anything that's not BitLocker-capable, so cross-platform compatibility isn't a big deal to me at this time. However, I am having a bit of an issue understanding the minimum requirement of a 64 MB volume. With TrueCrypt, I was able to protect small files (and most of my protected files are fairly small) in containers down to 300 KB or even less. When I finally created a VHD of an appropriate size last night (100 MB), it seemed the file system itself only took up about 3 MB and encrypting it with BitLocker didn't appear to take up any more. While 3 MB is still an order of magnitude larger than the smallest volume I could make with TrueCrypt, it's still relatively reasonable in comparison to 64 MB. This is an especially large amount of overhead (and largely wasted at that, since it's mostly empty space for now) when I consider that some of these volumes will be stored and synced in the cloud. What possible reasons could BitLocker have for needing volumes to be 64 MB large, when it's not even appearing to use that space? BitLocker FAQ on TechNet

  Read the article

• Windows based development environment: HyperV, VMWare, or VirtualBox on development machine?

  - by bleepzter

  I am a software engineer with a little bit of an informal "support" functionality... I am trying to figure out what is the best possible approach to employing virtualization technologies into our development process. Since the code we develop is server-centric, testing it often requires a VM with specific software requirements. I used to use VM Ware player (free version) to run my VM's until both of my laptops started exhibiting issues with corrupted windows 7 services and dying hard drives. All leads pointed to VMWare, which by the way seems to be a solid product if you pay for the Workstation edition ($300). On a side note, I have always been a fan of the Windows Server product line. I think it makes for one of the best development environments out there - it is highly scalable, highly reliable, and very efficient. So to be fair I replaced the drives of the laptops and installed Windows Server 2008R2, VS2010 Ultimate SP1, SQL Server 2008R2, TFS Server 2010 and all other tools and API's needed do do my work properly. So now I am stuck with a bunch of VMWare VMs. I don't want to repeat of what happened before, and I certainly don't want to bog down my machine with an inefficient hypervisor or services that are not needed. Futhermore the VMDK hard-disk format used by VMWare is not compatible with the VHD format of Hyper V. It is my understanding that converting from one format to the other can only happen by Microsoft System Center Virtual Machine which I have downloaded from MSDN and ready to install. I guess the question at this point is: Does SCVM run as another service in Windows? Is it a memory hog? What is a better virtualization technology - Hyper-V or Virtual Box in terms of efficiency ease of use and most importantly - memory footprint? (Keep in mind the development environment already has a ton of services running such as TFS Server, SQL Server, IIS, etc...) How would you advise to proceed at this point so that the VMs are still used in the test process? Thanks Martin

  Read the article

• Multi- authentication scenario for a public internet service using Kerberos

  - by StrangeLoop

  I have a public web server which has users coming from internet (via HTTPS) and from a corporate intranet. I wish to use Kerberos authentication for the intranet users so that they would be automatically logged in the web application without the need to provide any login/password (assuming they are already logged to the Windows domain). For the users coming from internet I want to provide traditional basic/form- based authentication. User/password data for these users would be stored internally in a database used by the application. Web application will be configured to use Kerberos authentication for users coming from specific intranet ip networks and basic/form- based authentication will be used for the rest of the users. From a security perspective, are there some risks involved in this kind of setup or is this a generally accepted solution? My understanding is that server doesn't need access to KDC (see Kerberos authentication, service host and access to KDC) and it can be completely isolated from AD and corporate intranet. The server has a keytab file stored locally that is used to decrypt tickets sent by the users coming from intranet. The tickets only contain username and domain of the incoming user. Server never sees the passwords of authenticated users. If the server would be hacked and the keytab file compromised, it would mean that attacker could forge tickets for any domain user and get access to the web application as any user. But typically this is the case anyway if hacker gains access to the keytab file on the local filesystem. The encryption key contained in the keytab file is based on the service account password in AD and is in hashed form, I guess it is very difficult to brute force this password if strong Kerberos encryption like AES-256-SHA1 is used. As the server has no network access to intranet, even the compromised service account couldn't be directly used for anything.

  Read the article

• Have to run auto-negotiate between clients and switch - "old" switch works fine - "new" switch results in "port flapping"?

  - by ConfusedAboutSwitching

  I need some help understanding a problem we're having at work: We run Altiris/Deployment Solution and have to use auto-negotiate between client systems and our switches (Altiris apparently requires this for imaging, PXE boot and other functions). We have several areas with old wiring (Cat 3 & Cat 5) that have old 10/100 Cisco switches in them - and we can set these systems up to "auto/auto" (auto-negotiate on both the NIC and the switch port), and everything has been working fine. But - our networking crew changed out a couple of old switches for 10/100/1000 Cisco switches, and now - they are claiming that "auto/auto" won't work because the switches can't auto-negotiate the way the old 10/100 switches did - and that if we try to set the new gig switches to auto-negotiate, the switch port starts "port flapping", and shuts the port down. But - if we put the old switch back in - they work using "auto/auto" just fine - no port flapping. The networking crew is telling me that the problem is that we're putting "new switches" on "old wire", and that the old cabling can't/won't support the auto-negotiation with these new switches....??? There's something about this that doesn't make sense to me - can someone explain this to me? Or is our networking crew just doing something wrong in the configuration of these new switches? While will the old switches work "auto/auto", but the new switches won't?? HELP!!....and Thanks!! M

  Read the article

• Dead Linux server - need help and options

  - by Choi S.

  All, I have a Dell PE 1950 w/ 2 SATA drives in a software RAID1. OS is CentOS 5.5 (2.6.18.x). Starting this afternoon we received HW errors (something on the bus is bad, E171F) and the machine became unresponsive. We hard booted and it came back up for about 5 hours but then it happened again. I'm trying to figure out our options. Unfortunately we do not have similar hardware but I have a small desktop that I can use. I was contemplating putting one of the drives into the desktop and then starting it up. My goal was to then P2V it using Vmware converter but apparently the free v5.x doesn't support hot cloning/converting on a RAID volume, only the Enterprise 4.x version of Converter does. My questions are: 1.) Is putting a single drive out of a RAID1 pair into another piece of HW is safe? Based on my research and understanding it appears to be but would like confirmation. 2.) Is there any work around to the Vmware Converter not supporting RAID volumes during a hot clone/convert session? 3.) Are there other options I'm overlooking? Thanks in advance for reading and responding. --Choi S.

  Read the article

• Strange IP address showing up with OS X ssh

  - by user50799

  I was futzing around with DTrace on Mac OS X and found the following script that prints out information about connections being established: $ cat script.d syscall::connect:entry { printf("execname: %s\n", execname); printf("pid: %d\n", pid); printf("sockfd: %d\n",arg0); socks = (struct sockaddr*)copyin(arg1, arg2); hport = (uint_t)socks->sa_data[0]; lport = (uint_t)socks->sa_data[1]; hport <<= 8; port = hport + lport; printf("Port number: %d\n", port); printf("IP address: %d.%d.%d.%d\n", socks->sa_data[2], socks->sa_data[3], socks->sa_data[4], socks->sa_data[5]); printf("======\n"); } I run it in one window: $ sudo dtrace -s ./script.d Then I ssh to another machine from another window. I get this output from my dtrace window: CPU ID FUNCTION:NAME 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 3 Port number: 22 IP address: 192.168.0.207 ====== 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 5 Port number: 12148 IP address: 109.112.47.108 ====== ^C The first IP address I can explain (192.168.0.207), that's the machine I'm connecting to. But what's with the 109.112.47.108 machine? It doesn't show up in tcpdump nor netstat -an Is there something with my dtrace code or my understanding of how the connect system call works?

  Read the article

• Cisco configuration for public library internet

  - by AlternateZ

  I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

  Read the article

• In Outlook 2007 Rules and Alerts, EXACTLY what does "my name" mean?

  - by Cornan The Iowan

  I can't find any definition of "my name" in the Outlook 2007 Rules and Alerts or on the Internet. In this case our email system presents two email addresses for me to the outside world. I'd like BOTH of these addresses to be recognized as being "me". I thought that perhaps if I understood the definition of "my name" in the rules, I could set up my mailbox(es) appropriately. Of course if "my name" actually means a single email address, then I won't be able to do so, but if it means "any email on my account" or "any account meeting [some criteria]", then I might be successful. I'd like to note a subtlety in the rules definitions. While there is a rule named "where my name is in the To or Cc box", the only rule for explicit addresses is "sent to people or distribution list" (I'm assuming that "sent to" means "in the To:" list rather than "in the To: or cc: lists"). Summing up. My preference: 1) Understanding the precise definition of "my name" so that I can use "where my name is in the To or Cc box" to capture both email addresses from my account. 2) Learning the "sent to people or distribution list" actually includes Cc: entries (I can test this myself of course) 3) Any other solution that will let me define a rule where my secondary email address will be detected in EITHER the To: or Cc: boxes.

  Read the article

• Steps to debugging web site latency and timeout issues

  - by Paperjam

  I have a client who has multiple offices around the country, all of which share the same Internet connection via their WAN. One specific office for this client is experiencing severe latency and timeout issues with my web site. Most, but not all, of the latency occurs on a specific ASPX page where multiple postbacks are made while populating cascading dropdown lists (rapid form submits). The latency is sporadic and can be anywhere from a few seconds to a full timeout. There is no indication that the timeouts are occurring on the server's end. The IT guy for this client is having trouble narrowing down the problem. Since it is affecting only one location for one client, I am led to believe it is not something with my site but something specific to that location. He's measured ping times while using the site and has noticed no real variance in ping times even when the page has timed out. I believe this may be being caused by some sort of Internet filter that doesn't like rapid form submits, but beyond a hunch I haven't a clue. My question is what things should I tell the IT guy to look for? While I'm not trying to provide active tech support for this issue, I would at least like to glean an understanding of what is going on and try to offer some sort of advice. Thank you.

  Read the article

• Snapshotting single disk of running Hyper-V VM

  - by modelnine

  I'm currently somewhat at a loss of how to create a snapshot of a single virtual hard-disk of a running Hyper-V VM. Generally, creating a differential disk while a server is shut down is no problem (i.e., call the new-vhd cmdlet and pass a ParentPath, then update the VHD-binding of the respective VM-device), but while the host is running, all I can find is checkpointing the VM as a whole (which creates snapshots of all attached disks), and leaves the VM-state in a form which isn't easily processable by external tools (i.e., it requires reading additional meta-data from the VM). Generally, what'd I'd like to happen for a single-disk snapshot (in my understanding) is: Pause the VM Rename current disk to some other name which specifies it as a base-snapshot Create a new VHD which has the renamed VHD as parent path and is marked as "current" Swap the VHD for the VM for the snapshotted hard-disk to the newly created differential VHD Resume the VM Is there any means to do this programatically? Update: I've seen that this is actually possible with SCSI-disks, i.e. pause the VM, remove the SCSI disk, make the snapshot, reattach the SCSI disk at the same position, resume the VM. And, the VM resumes properly. But: is something similar also possible with G1 machines for the boot disk which is always IDE?

  Read the article

• DNS caching server config problem

  - by Alex

  I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related. So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller. My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working. So that leaves me to think that my caching server is not forwarding properly. For example, this AD is going to have a naming convention of hostname.mydomain.local. If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local. However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain). Any suggestions? Here is my named.conf file: options { directory "/var/named"; listen-on { 192.168.0.14; 127.0.0.1; }; forwarders { ; ; }; forward first; }; zone "." in { type hint; file "db.cache"; }; zone "0.0.127.in-addr.arpa" in { type master; file "db.127.0.0"; }; //forward zone for mydomain.local zone "mydomain.local" { type forward; forwarders { 192.168.1.21; }; };

  Read the article

• Possible for linux bridge to intercept traffic?

  - by A G

  I have a linux machine setup as a bridge between a client and a server; brctl addbr0 brctl addif br0 eth1 brctl addif br0 eth2 ifconfig eth1 0.0.0.0 ifconfig eth2 0.0.0.0 ip link set br0 up I also have an application listening on port 8080 of this machine. Is it possible to have traffic destined for port 80 to be passed to my application? I have done some research and it looks like it could be done using ebtables and iptables. Here is the rest of my setup: //set the ebtables to pass this traffic up to ip for processing; DROP on the broute table should do this ebtables -t broute -A BROUTING -p ipv4 --ip-proto tcp --ip-dport 80 -j redirect --redirect-target DROP //set iptables to forward this traffic to my app listening on port 8080 iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 8080 --tproxy-mark 1/1 iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1/1 //once the flows are marked, have them delivered locally via loopback interface ip rule add fwmark 1/1 table 1 ip route add local 0.0.0.0/0 dev lo table 1 //enable ip packet forwarding echo 1 > /proc/sys/net/ipv4/ip_forward However nothing is coming into my application. Am I missing anything? My understanding is that the target DROP on the broute BROUTING chain will push it up to be processed by iptables. Secondly, are there any other alternatives I should investigate? Edit: IPtables gets it at nat PREROUTING, but it looks like it drops after that; the INPUT chain (in either mangle or filter) doesn't see the packet.

  Read the article

• Active Directory server down, recovering without reinstalling

  - by whatever

  My Windows 2003 server suddenly ceased to function as a DC (this server is the only DC of the domain). All AD related services are down. The only way I can login to the AD is physically to the machine. Everytime I access an AD-related service (e.g. "AD users and computers") I get the below error: Naming information cannot be located because: The specified directory service attribute or value does not exist. Contact your system administrator to verify that your domain is properly configured and is currently online. I found the below system event which matches the time when the issue started, this re-occurs everytime I reboot the server. NTDS General | Global Catalog | Active Directory was unable to establish a connection with the global catalog. Additional Data Error value: 1355 The specified domain either does not exist or could not be contacted. Internal ID: 3200d33 I started the troubleshooting with DNS. Netdiag throws the below error although I think this is simply a consequence of not being able to access the Global Catalog. The procedure entry point DnsGetPrimaryDomainName_UTF8 could not be located in the dynamic link library DNSAPI.dll. Anyway DNS seems OK because I can ping the DC FQDN from the DC itself. I found the below solution which is supposed to help by doing some cleanup of the metadata: http://support.microsoft.com/kb/216498 If I follow procedure 1 here is what I get at step 9: no current site Domain - DC=<mydomain>,DC=<com> no current server no current naming context I can continue the procedure until step 14. I haven't tested step 15 as my understanding is that I will have to reinstall the whole AD again. Is there any way I can recover my AD from there without having to reinstall the whole thing? Update: Yes, the server was powered off/on because reboot would take forever (not because I thought power cycling the unit would fix it more than a reboot).

  Read the article

• Matched or unmatched drives for RAID arrays?

  - by Will

  Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

  Read the article

• Can next hop address be same as destination address?

  - by Raj

  Like if host address is 100.0.0.1 and next hop address is 100.0.0.2 and destination ip address is also 100.0.0.2 Is this a valid use case? Any real life usage? <dest ip> <next hop> ip route 100.0.0.2 255.255.255.255 100.0.0.2 weight 1 next-hop-vrf GlobalRouter Above is the command on a router inside a VRF. 100.0.0.2 is pingable from host. 100.0.0.1 & 100.0.0.2 are an ip address assigned to a VLAN on host & destination respectively. On a linux box, Such configuration is valid. [root]# netstat -r -n Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 55.55.55.55 55.55.55.55 255.255.255.255 UGH 0 0 0 eth0 [root]# ip route show 55.55.55.55 via 55.55.55.55 dev eth0 As per my understanding, If a destination IP is reachable (i.e in the same subnet of host IP) we dont need a next hop. I came across one application for using next hop for destination IP in same subnet (i.e for VPN) See this: Will packets send to the same subnet go through routers? If next hop != destination IP but they are in same subnet as that of host, is a valid scenario for VPN, then i am wondering what are the applications of next_hop==dest_ip & subnet same as host? This is my first post in Super User. Extremely happy with the quick and warm response.

  Read the article

• Linux on MacBook Air

  - by enduser

  I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

  Read the article

• Kerberos issues after new server of same name joined to domain

  - by MentalBlock

  Environment: Windows Server 2012, 2 Domain Controllers, 1 domain. A server called Sharepoint1 was joined to the domain (running Sharepoint 2013 using NTLM). The fresh install for Sharepoint1 (OS and Sharepoint) is performed and set up for Kerberos and joined to the domain using the same name. Two SPNs added for HTTP/sharepoint1 and HTTP/sharepoint1.somedomain.net for account SPFarm. Active Directory shows a single, non-duplicate computer account with a create date of the first server and a modify date of the second server creation. A separate server also on the domain has the server added to All Servers in Server Manager. This server shows a local error in the events exactly like This from Technet (Kerberos error 4 - KRB_AP_ERR_MODIFIED). Question: Can someone help me understand if the problem is: The computer account is still the old account and causing a Kerberos ticket mismatch (granted some housekeeping in AD might have prevented this) (In my limited understanding of Kerberos and SPNs) that the SPFarm account used for the SPNs is somehow mismatched with HTTP calls made by the remote server management tools services in Windows Server 2012 Something completely different? I am leaning towards the first one, since I tested the same SPNs on another server and it didn't seem to cause the same issue. If this is the case, can it be easily and safely repaired? Is there a proper way to either reset the account or better yet, delete and re-add the account? Although it sounds simple enough with some powershell or clicking around in AD Users and Computers, I am uncertain what impact this might have on an existing server, particularly one running SharePoint. What is the safest and simplest way to proceed? Thanks!

  Read the article

• cPanel FTP account access to sym links from parent directory

  - by totbar

  I would like to give a potential developer temporary access to some of my projects. I have almost everything in its own subdomain, and each directory is a sibling to my public_html directory. It looks something like: ("developer" is the cPanel account name.) developer/ *This is the top level directory for the cPanel account. "/home/developer" site1/ *site1.mysite.com site2/ *site2.mysite.com site3/ *site3.mysite.com public_html/ *www.mysite.com ... etc I created a directory inside public_html called tempdev and I added symbolic links to each of the sibling directories listed above. My understanding of cPanel is that I can only assign one user with "Special FTP Access" per domain. I really dont want to give a complete stranger my login creds, (its just a development environment but still). So I used the cPanel FTP account creator UI. It will not allow me to assign the user access to the directories outside of public_html. I cant even give access to public_html either. So I made the tempdev directory in www and created the symlinks. Using the new account, I can see the symlinks, but I can go into them. Is there a better way to accomplish what I am attempting?

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >