Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 162/1213 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• How to configure a MInimal Ubuntu installation?

  - by Uri Herrera

  I recently re installed Ubuntu using the mini.iso, but much to my dismay the mini.iso is not configured the same way as the Ubuntu desktop ISO some "problems" I'm facing such as: An Installation using the regular Ubuntu CD recognizes my active network connections in Network Manager, Installing with the mini.iso gives me a working connection however no connections are "active" in Network Manager displaying the message "The system network services are not compatible with this version." In a regular Ubuntu install connecting an Android phone to the PC mounts the phone's internal memory and sd card if present, Using the mini.iso the phone is detected as it appears with the command lsusb but it's not mounted and can't be mounted. In the same regards using the phone to tether it's connection to the PC via USB, the phone is connected to my (wifi) IN the regular Ubuntu install the phone is recognized as a networking device and is used as connection usb0, while in the mini.iso nothing happens, and trying to add the connection to /etc/network/interfaces results in the OS crashing. Just to make sure It wasn't a matter of my user not having the correct permissions or a lack of "groups", I've checked with an Ubuntu VM and the groups are the same, the networking files are the same, and the packages (except those of ubuntu-desktop such as Unity, Firefox, LibreOffice, and other non-essential software) are Installed in my PC, so what else is there to look for?. I'm sure I'm missing something, and I'd prefer not to install Ubuntu again, using the regular cd. How can I manage to get the same behaviour/configuration without reinstalling ?

  Read the article

• Sound muted in milliseconds after unmute

  - by Yash Gupta

  I installed Ubuntu 11.10 recently, and sound doesn't work properly. Whenever I try to play a sound (from any software), the sound is muted, and when I unmute it, it stats there for a fraction of second and mutes itself. After trying various things, I plugged in a headphone in the front microphone jack of my computer, and magecally, the sound started to come out from my speakers (Which are connected to the line-out in the rear panel). I have analog stereo speakers. The sound card (intel HDA as shown in alsamixer) is detected properly. I have ecs G41T-M7 motherboard and nVidia GT240 (with graphics drivers installed)

  Read the article

• Audio not working

  - by user3215

  Anybody could help me in troubleshooting audio problem on ubutnu 9.04 desktop edition?. For some reason I've to keep this os not upgraded and I'm trying to fix the audio problem on this for months. It works well on upgraded version(9.10,10.04) but not on jaunty. aplay -l: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC883 Analog [ALC883 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC883 Digital [ALC883 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 lsmod | grep snd: snd_hda_intel 436148 7 snd_pcm_oss 46336 0 snd_mixer_oss 22656 1 snd_pcm_oss snd_pcm 83076 4 snd_hda_intel,snd_pcm_oss snd_seq_dummy 10756 0 snd_seq_oss 37760 0 snd_seq_midi 14336 0 snd_rawmidi 29696 1 snd_seq_midi snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 29704 2 snd_pcm,snd_seq snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 62756 21 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15200 1 snd snd_page_alloc 16904 2 snd_hda_intel,snd_pcm cat /proc/asound/cards: 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xe1280000 irq 16 cat /proc/asound/version: Advanced Linux Sound Architecture Driver Version 1.0.18rc3. vim /etc/modules: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp Audio Settings:

  Read the article

• Have I fixed my partition problem with os x 10.5.8? Are my GPT and MBR back to normal?

  - by David Schaap

  I'm new to linux and I have overstepped by abilities. I tried dual booting os x 10.5.8 with ubuntu 11.10 with rEFIt, but I been having problems with partitioning. Instead of enduring more headaches, I've made the decision to simply use ubuntu on VirtualBox. I've tried to return my HDD to normal, but I am looking for confirmation that my partitions are ok. Here is the report from partition inspector: *** Report for internal hard disk *** Current GPT partition table: # Start LBA End LBA Type 1 409640 233917359 Mac OS X HFS+ Current MBR partition table: # A Start LBA End LBA Type 1 1 234441647 ee EFI Protective MBR contents: Boot Code: GRUB Partition at LBA 409640: Boot Code: None File System: HFS Extended (HFS+) Listed in GPT as partition 1, type Mac OS X HFS+ Also, my HDD directory has a bunch of extra folders in them and they appear to be ubuntu related, although it is no longer installed. folders like bin, sbin, cores, var, user, and so on. Those folders aren't supposed to be there, right? Thanks in advance.

  Read the article

• Migrating a Windows Server to Ubuntu Server to provide Samba, AFP and Roaming Profiles

  - by Dan

  I'm replacing our old Windows XP Pro office server with a HP Microserver running Ubuntu Server 12.04 LTS. I'm not a Linux expert but I can find my way around a terminal prompt, I'm a Mac user by choice. The office use a mix of Windows XP Pro machines and OSX Lion laptops. I included Samba during installation, and I'm planning on using Netatalk for the AFP and Bonjour sharing. I'd quite like to have samba make the server appear in 'My network places' on the Windows machines the way Bonjour makes it appear in finder on the Macs, if this is possible? I want to get to a point so that a user logging into Windows, gets connected to the Ubuntu server (do they need an Ubuntu user account?) which get them their shares and their Windows user profile (though a standard profile across users would do). The upshot is to make centralised control of user accounts (e.g. If a person leaves, killing their account on the server stops their Windows logon and ability to access Samba shares) and to ensure files aren't stored on the individual machines for backup/security purposes. I want to make this as simple as possible, so don't want to have loads of stuff I don't need, I just can't figure out: What I need at the server end: - will Samba be enough (already installed as part of initial installation), or will I need to cock around with LDAP (and how does this interact with Samba) - For someone of moderate Linux competence like me, is there a package that offers easy admin of user accounts, e.g. a GUI like phpLDAPadmin (if LDAP is necessary) How to configure the XP machines: - do I need to have the XP machines set up as a domain controller (I've no idea, really) - roaming profiles looks to offer the feature of putting the user's files on the server rather than the machine itself along with a profile that follows the user from machine to machine. Syncing Mac user's home folders with the server This is less of a concern because I can set up Time Machine if it comes to it, but I'd appreciate any recommendations of what approach I should take having the Mac home folders synced to the server.

  Read the article

• terminal does not find xmonad.hs

  - by arpho

  Iam using xmonad on ubuntu 13.04, in ~/.xmonad my computer has the file xmonad.hs, if I try to read it from terminal using nano it opens a new file, I can access the file opening it from geany or gedit, but if I try to recompile it, the system does not find that file, so I cannot configure xmonad, every thing I try on this file from console does not work, because terminal even if I am root cannot see it, can you help me solve this issue?

  Read the article

• Since a few days, Dropbox stopped syncing

  - by Fabio

  Theres a new problem with nautilus-dropbox and is the worst for a service like Dropbox: stopped syncing and their tech support don't believe their users. The problem is: start dropbox it downloads index creates folders start to download files stop downloading files or the speed is like 0.3k/seg even deleting everything doesn't work, even syncing a single folder with a few files, not even configuring a different limit speed or let all your bandwith, nothing works for me and i have found many users with the same problem. it's strange, i have two computers with ubuntu 14.04 and one with windows 7, and in one of the linux machines it works fine, but not in the other one. Both of them are x64. The answers from the tech support starts with "delete everything and reinstall" to "you may be blocking port 443", yeah, sure (and if i do that half of internet dissapears, idiot), but nothing works. Someone has some idea? i cant find any log file (at least a text log file like in /var/log) to understand what is dropbox doing and what is not working. PS: sorry for my "english", is not my language Examples: dropbox slow on ubuntu 14.04 Dropbox does not sync on ubuntu 14.04 Dropbox Status (in spanish but is the same thing) fabio@canopus:~$ dropbox status Sincronizando (Quedan 330 archivos., Faltan 9 días.) Descargando 330 archivos... (0,3 KB/s, Faltan 9 días.) 9 days for 330 files / 100Mb

  Read the article

• kile does not get keyboard input, respond to Alt+F

  - by vishvAs vAsuki

  I use 11.10 with Unity. I use two kde apps a lot - kile and kate. Since the latest upgrade, I have observed two problems: a] I can never use Alt+F to select the file menu (works with other apps), yet when I press Alt, kile's menu comes up in the status bar. b] A few times every day, while using kile (haven't used kate as much recently), the keyboard stops responding (just in the 'editor' portion, rather than in structure-tree navigation). I cannot enter any text, but mouse works fine. I usually restart kile to continue working. One inconsistent way to reproduce it (multiple times today): I cut text from one open document using Ctrl-X switched to another document in the same kile window using Ctrl-Tab, then this happened. c] Sometimes, in kate, I can type in the editor but the keyboard won't work in the 'File open dialog'. How do I fix the above?

  Read the article

• Multitouch script (using xinput) no longer working

  - by Pitto

  #!/bin/bash # # list of synaptics device properties http://www.x.org/archive/X11R7.5/doc/man/man4/synaptics.4.html#sect4 # list current synaptics device properties: xinput list-props '"SynPS/2 Synaptics TouchPad"' # sleep 5 #added delay... xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Device Enabled" 8 1 xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 4 xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Width" 9 # Below width 1 finger touch, above width simulate 2 finger touch. - value=pad-pixels xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Edge Scrolling" 1 1 0 # vertical, horizontal, corner - values: 0=disable 1=enable xinput --set-prop --type=int --format=32 "SynPS/2 Synaptics TouchPad" "Synaptics Jumpy Cursor Threshold" 250 # stabilize 2 finger actions - value=pad-pixels #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Tap Action" 0 0 0 0 1 2 3 # pad corners rt rb lt lb tap fingers 1 2 3 (can't simulate more then 2 tap fingers AFAIK) - values: 0=disable 1=left 2=middle 3=right etc. (in FF 8=back 9=forward) xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 1 0 # vertical scrolling, horizontal scrolling - values: 0=disable 1=enable #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Circular Scrolling" 1 #xinput --set-prop --type=int --format=8 "SynPS/2 Synaptics TouchPad" "Synaptics Circular Scrolling Trigger" 3 Hello everybody... The above script allowed me to use happily multitouch for a month... Now if I do a two fingers scrolling the mouse cursor just runs on the screen like possessed... Any hints?

  Read the article

• TypeError: Cannot call method 'hasOwnProperty' of null, while creating a QMLscene window

  - by tomoqv

  I am trying to make a simple Ubuntu Touch web application with Qt Creator. I have set up a new project according to the tutorial and committed the files to Bazaar. I have set a url instead of the default index.htm in the qml file of the project. Using build-run loads a QML Scene window with the desired webpage, but Qt Creator yields the following output: Starting /usr/lib/i386-linux-gnu/qt5/bin/qmlscene -I /home/tomas/ubuntu-sdk/SL-planner -I /usr/bin -I /usr/lib/i386-linux-gnu/qt5/qml /home/tomas/ubuntu-sdk/SL-planner/SL-planner.qml unity::action::ActionManager::ActionManager(QObject*): Could not determine application identifier. HUD will not work properly. Provide your application identifier in $APP_ID environment variable. file:///usr/lib/i386-linux-gnu/qt5/qml/Ubuntu/Components/MainView.qml:257: TypeError: Cannot call method 'hasOwnProperty' of null My SL-planner.qml looks like this: import QtQuick 2.0 import Ubuntu.Components 0.1 import QtWebKit 3.0 /*! \brief MainView with a Flickable WebView. */ MainView { // objectName for functional testing purposes (autopilot-qt5) objectName: "mainView" // Note! applicationName needs to match the "name" field of the click manifest applicationName: "com.ubuntu.developer.tomoqv.SL-planner" /* This property enables the application to change orientation when the device is rotated. The default is false. */ automaticOrientation: true width: units.gu(100) height: units.gu(75) Flickable { id: webViewFlickable anchors.fill: parent WebView { id: webView anchors.fill: parent url: "http://mobil.sl.se" } } } What am I missing?

  Read the article

• Can't specify window's class in CCSM's Place Windows

  - by Anto

  Following this method, I wanted to "place" some of my windows on specific viewports. For instance, I want Xchat to always start on my top right viewport (x=2, y=1). But after I have set everything up and clicked the "Close" button to validate it (I don't have any other action button, like "OK" or "Apply"), the only thing that get saved up are the viewport X and Y coordinates. The window class (in my case class=Xchat) remains empty. This bug only occurs in the "Windows with fixed viewport" section; it works well in the "Windows with fixed placement mode", for instance. How can I solve or circumvent this issue ?

  Read the article

• How to fix the Dell Mini 10v (1010) touchpad with Ubuntu 12.04.1

  - by John Lawrence Aspden

  I've just installed 12.04.1 from scratch on my Mini 10v, and the touchpad is behaving a bit oddly. It's got buttons integrated into the touchpad, and it looks as though a touch on a button is also being registered as a touch on the touchpad, causing all sorts of problems with clicking and dragging. Is there a fix for this? I seem to remember on very old versions of ubuntu having to disable the lower part of the touchpad, but I don't think it's been an issue for some time.

  Read the article

• Converting from mp4 to Xvid avi using avconv?

  - by Ricardo Gladwell

  I normally use avidemux to convert mp4s to Xvid AVI for my Philips Streamium SLM5500. Normally I select MPEG-4 ASP (Xvid) at Two Pass with an average bitrate f 1500kb/s for video and AC3 (lav) audio and it converts correctly. However, I'm trying to using avconv so I can automate the process with a script, but when I do this the video stutters and stops playing part way through. I have a suspicion its something to do with a faulty audio conversion. The commands I'm using are as follows: avconv -y -i video.mp4 -pass 1 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi /dev/null avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi There is a bewildering array of arguments for avconv. Is there something I'm doing wrong? Is there a way I can script avidemux from a headless server? Please see command line output: $ avconv -y -i video.mp4 -pass 1 -vtag xvid -an -b:v 1500k -f avi /dev/null avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x7f4c40] w:720 h:404 pixfmt:yuv420p Output #0, avi, to '/dev/null': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 1, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Press ctrl-c to stop encoding frame=66227 fps=328 q=2.0 Lsize= 0kB time=2649.16 bitrate= 0.0kbits/s video:401602kB audio:0kB global headers:0kB muxing overhead -100.000000% $ avconv -y -i video.mp4 -pass 2 -vtag xvid -c:a ac3 -b:a 128k -b:v 1500k -f avi video.avi avconv version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:49:20 with gcc 4.7.2 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 Duration: 00:44:09.16, start: 0.000000, bitrate: 669 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 720x404 [PAR 1:1 DAR 180:101], 538 kb/s, 25 fps, 25 tbr, 100 tbn, 50 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, s16, 127 kb/s Metadata: creation_time : 2013-02-04 13:53:42 [buffer @ 0x12b4f00] w:720 h:404 pixfmt:yuv420p Incompatible sample format 's16' for codec 'ac3', auto-selecting format 'flt' [mpeg4 @ 0x12b3ec0] [lavc rc] Using all of requested bitrate is not necessary for this video with these parameters. Output #0, avi, to 'video.avi': Metadata: major_brand : isom minor_version : 1 compatible_brands: isomavc1 creation_time : 2013-02-04 13:53:38 ISFT : Lavf53.21.1 Stream #0.0(und): Video: mpeg4, yuv420p, 720x404 [PAR 1:1 DAR 180:101], q=2-31, pass 2, 1500 kb/s, 25 tbn, 25 tbc Metadata: creation_time : 2013-02-04 13:53:38 Stream #0.1(und): Audio: ac3, 44100 Hz, stereo, flt, 128 kb/s Metadata: creation_time : 2013-02-04 13:53:42 Stream mapping: Stream #0:0 -> #0:0 (h264 -> mpeg4) Stream #0:1 -> #0:1 (ac3 -> ac3) Press ctrl-c to stop encoding Input stream #0:1 frame changed from rate:44100 fmt:s16 ch:2 to rate:44100 fmt:flt ch:2 frame=66227 fps=284 q=2.2 Lsize= 458486kB time=2649.13 bitrate=1417.8kbits/s video:413716kB audio:41393kB global headers:0kB muxing overhead 0.741969%

  Read the article

• Canon Mx772 printer recognized, drivers loaded...but all print jobs "Held"

  - by user212169

  BRAND NEW to Ubuntu but loving it so far. I have a Canon MX772 wireless printing running on my network and am able to print fine from a PC and Mac. Using the printers IP, Ubuntu was able to find it and I accepted all of the "recommended" items (it found a Canon MX770 driver). Everything seems to load fine...but the test page does not print, nor does any print commands make it to the printer. If I open the print dialogue jobs are shown as "held" and when I look at the jobs attributes, I see "Job printer state message=cannot specify model number" and then a few lines down "job state reasons=aborted by system". If I try to "resume" it immediately goes back to "held". I can successfully ping the IP of the printer. Would be very appreciative of other ideas...printing is the last check in the box before I am all set up. Thanks!

  Read the article

• Tor check failed though Vidalia shows green onion

  - by Wolter Hellmund

  I have installed tor successfully and Vidalia shows it is running without problems; however, when I check if I am using tor in this website I get an error message saying I am not using tor. I have tried two things to fix this: I installed ProxySwitchy on Google Chrome, and created a profile for Tor (with address 127.0.0.1, port 8118), but enabling the proxy doesn't change the results in the tor check website linked before. I changed my network proxy settings through System Settings Network from None to Manual, and selected as address always 127.0.0.1 and as port 8118 for all but for the socket, for which I entered 9050 instead. This makes internet stop working completely. How can I fix this problem?

  Read the article

• How do i make my existing ubuntu in a bootable installation CD? I tried remastersys but fails with 11.10

  - by YumYumYum

  I need to install 10 PC which has identical setup and hardware. So i was trying remastersys but its failing. How can i resolve this or use something else to achieve this? Updating the remastersys.log cat: /home/remastersys/remastersys/tmpusers: No such file or directory Cleaning up the install icon from the user desktops Removing the ubiquity frontend as it has been included and is not needed on the normal system Calculating the installed filesystem size for the installer Removing remastersys-firstboot from system startup Removing any system startup links for /etc/init.d/remastersys-firstboot ... /etc/rc0.d/K20remastersys-firstboot /etc/rc1.d/K20remastersys-firstboot /etc/rc2.d/S20remastersys-firstboot /etc/rc3.d/S20remastersys-firstboot /etc/rc4.d/S20remastersys-firstboot /etc/rc5.d/S20remastersys-firstboot /etc/rc6.d/K20remastersys-firstboot Making disk compatible with Ubuntu Startup Disk Creator. Creating md5sum.txt for the livecd/dvd Creating /var/tmp/custom.iso in /home/remastersys/remastersys The iso was not created. There was a problem. Exiting Follow up: 1) I am unhappy that there is nothing exist for this to recover/backup 11.10 2) Anyway i have to do it 3) I did not used the popular Clonezilla because it does not offer me iso 4) I downloaded: http://clonezilla-sysresccd.hellug.gr/download.html a) created a bootable CD from that ISO b) booted and followed those steps http://clonezilla-sysresccd.hellug.gr/restore.html c) i got a iso file with everyhing on it including boot-loaders 5) then in another system i used my same CD to restore my image Perfectly worked.

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Accidentally uninstalled Ubuntu 14.04 system settings. How to get them back?

  - by Dan

  Somehow, cleaning up useless software (using software center), I uninstalled Ubuntu "system settings". I did this by mistake. Now I fail to find system settings application using software center (and there are so many items in history...). It seems strange to me because usually when I try to uninstall something critical (system testing for example), the dependencies manager tells me It will uninstall the whole desktop system then. I am sure I did not have that warning. So I need the name of the software to install or a command line command rather than a system restore to get it back. Very interesting thing. If you ever want to play with this and reproduce it, you will be confused to see Ubuntu Mobile system settings instead! Yes, mobile network and touchscreen settings! Happy pre-release viewing!

  Read the article

• How to reinstall Ubuntu keeping my data intact?

  - by Santosh Linkha

  I want to reinstall Ubuntu keeping my data intact. I have 160 GB hardrive (sata or pata I don't know but it's slim and made in China) with a 40 GB ext3 partition, a 4GB swap memory and 3 other partition with a FAT32 file system. I have around 4GB space on my drive where Linux is installed. I'd like to keep the data intact, especially the Downloads folder, desktop, and /var/www; And I no longer have access to any other machines or external storage devices.

  Read the article

• Ubuntu 12.04 LTS installation problem

  - by Zxy

  I am trying to install Ubuntu 12.04 LTS on my PC using WUBI. However, I keep getting this error: An error occured: *Error executing command >>command=C:\\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occured setting the element data. The request is not supported. >>stdout= For more information, please see the logfile:* Logfile: 06-11 10:57 DEBUG TaskList: ## Finished choose_disk_sizes 06-11 10:57 DEBUG TaskList: ## Running expand_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished expand_diskimage 06-11 10:59 DEBUG TaskList: ## Running create_swap_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished create_swap_diskimage 06-11 10:59 DEBUG TaskList: ## Running modify_bootloader... 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ### Running modify_bcd... 06-11 10:59 DEBUG WindowsBackend: modify_bcd Drive(C: hd 51255.1171875 mb free ntfs) 06-11 10:59 ERROR TaskList: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: # Cancelling tasklist 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 ERROR root: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ## Finished modify_bootloader 06-11 10:59 DEBUG TaskList: # Finished tasklist*

  Read the article

• Will upgrading disrupt online backup software (Crashplan)?

  - by Rob

  Has anyone had any experience upgrading to Ubuntu 11.04, and how this might affect online backup software processes? Specifically, I'm currently running Ubuntu 10.10 and using Crashplan v3. Crashplan backup engine runs constantly in the background to monitor files for changes and back up accordingly. Will upgrading to Ubuntu 11.04 affect any of the Crashplan backup process? Has anyone done this successfully? I'd like to upgrade to the latest and greatest Ubuntu release, but not at the risk of affecting the backup, or worse, having to start from scratch again and upload the entire library!

  Read the article

• Oracle Virtualbox does not open since upgrade

  - by Langjan

  After upgrading to Ubuntu 12.10, I have been unable to restart my Oracle virtualbox. jan@jan-System-Product-Name:~$ sudo /etc/init.d/vboxdrv setup sudo: /etc/init.d/vboxdrv: command not found Where do I go from here? Can anyone help, please? I tried to install virtualbox via these commands: echo "deb http://download.virtualbox.org/virtualbox/debian $(lsb_release -sc) contrib" | sudo tee /etc/apt/sources.list.d/virtualbox.list wget -q http://download.virtualbox.org/virtu...racle_vbox.asc -O- | sudo apt-key add - sudo apt-get update sudo apt-get install virtualbox-4.2 Attempts to install via package manager vbox would not start. These error reports are received: Because the USB 2.0 controller state is part of the saved VM state, the VM cannot be started.To fix this problem, either install the 'Oracle VM VirtualBox Extension Pack' or disable USB 2.0 support in the VM settings (VERR_NOT_FOUND). Result Code: NS_ERROR_FAILURE (0x80004005) Component: Console Interface: IConsole {db7ab4ca-2a3f-4183-9243-c1208da92392} I installed the extension pack, no change in result. I have added myself as user, but the error report says user must be added, when I redo add user, it says user is already added. The following outputs were also received:   Failed to open a session for the virtual machine Nuwe skelm. Implementation of the USB 2.0 controller not found! I cannot access the USB 2.0 setting to disable it. Where do I go from here, please?

  Read the article

• What package is meant to replace thinkfinger in 11.10?

  - by misterhaan

  My laptop has a fingerprint reader that until 11.10 I used via thinkfinger. That package is no longer in the repositories, but I assume there’s a different package meant to support fingerprint readers in thinkfinger’s place. What is the recommended fingerprint reader package? Should I just find thinkfinger on my own and use that instead? Here’s my reader’s lsusb output: Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader

  Read the article

• Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

  - by Matthew Carroll

  I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

  Read the article

• Graphics Driver problem, ATI Radeon HD 3200, small screen size and slows everything down.

  - by Arvind Jangid

  Regards. I am using a: 2009 Compaq Presario CQ40-415AU Notebook AMD Athlon X2 Dual core Processor 2.1 GHz 1024 MB L2 cache 3GB DDR2 RAM ATI Radeon + HD 3200 Graphics 256 MB, screen is 14 inch widescreen with resolution of 1280*800. I installed Ubuntu 12.04 LTS 32bit on my laptop. It works brilliantly until I installed graphics driver. When I installed the driver, the graphics became slow. Everything slowed down. Even the splash screen resolution changed to something like 640*480. I have liked Ubuntu since 9.10 and for the freedom it provides and its versatility, but graphics problem remains the same. I even installed Ubuntu on a 50 GB partition with 6 GB swap partition. My HDD is 320 GB. Please tell me what is wrong.

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >