Search Results

Search found 10961 results on 439 pages for 'internal dns'.

Page 162/439 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• How to forward connection from one interface to another under linux

  - by Daniel

  Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

  Read the article

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• Are there other application layer firewalls like Microfot TMG (ISA) that do advanced http rules?

  - by Bret Fisher

  Since the old days ISA and now TMG have had several great features that I often want to deploy to my customers because of the enhanced functionality and security, but often the cost of an additinal server HW, Windows Server, and TMG license is too much to justify when compaired to a $300-500 appliance. Are there other gateway firewalls that can perform one or more of these application layer features: pre-auth incoming http traffic against AD/LDAP before sending packets to internal server (forms auth or basic creds popup)? read host headers of incoming http traffic (even on https) to a single public IP and route packets to different internal servers based on that host header?

  Read the article

• How to Configure Source NAT (Private IP => Public IP Outbound)

  - by DavidScherer

  I'm running VMWare ESXi Free and have Zentyal SBS 3.2 running as a Gateway. I have 5 Public IPS (CIDR/29, let's call them 69.1.1.1 - 69.1.1.5) and currently Zentyal is bound to 69.1.1.1 as the Gateway, with the other 4 Public IPs set as Virtual Interfaces in Zentyal (wan2-wan5) I have machines sitting on the Private Network (10.34.251.x) that, when going Outbound (to Google for instance) should be seen by the Internet as an IP other than the Gateway (69.1.1.1), this is because our machines need to be able to communicate with 3rd party APIs that expect these requests to come from a specific IP. From what I could find, SNAT (Source NAT) in Zentyal is used to achieve this, but I'm not sure how to configure it and cannot find a specific piece of Documentation for it at Zentyal. I've tried setting this up a couple different ways, with no results and at this point I have no idea if I'm going about this completely wrong, or my lack of experience with networking and the associated terminology is preventing me from placing the correct values in the correct fields. I get the following form to set up "SNAT" rules in Zentyal: Perhaps someone can offer some guidance and definitions for the fields above? SNAT Address Is this the Public IP I want to masquerade? Outgoing Interface Should this by my External NIC (one connected to Public 'Net), or is it the "Private" interface? It sounds as though this should be the External interface as I want the traffic from the internal network sent Out over this Interface (using a different IP than normal, anyway) Source Is the the Source on the internal network (one of the private IPs?), a public IP I want to masquerade as, or something else entirely? Destination Is this a place on the Internet (eg, "Only do this for the Site Google.com"/IP) or am I allowing myself to become confused again? Service I'm assuming this allows me to restrict which services this rule will apply to, but is it for a service on the internal network or a service being accessed on the external network? If I can offer any further details or information to make what I'm trying to do more clear, I will happily do so. Honestly any kind of help here would be very appreciated. I'm not a NetOps or anything even close, I spend most of my day writing code and my entire "team" at this company consists of "me, myself, and I" so while I try to broaden my KB at every possible opportunity, I can only learn so much, so fast and I feel like with networking especially there's just so much, coupled with a learning curve for each solution that likes to (from my limited perspective) use slightly different terminology that what I'm used to (and I don't exactly have the necessary experience to cross reference this stuff with the stuff I already know in context).

  Read the article

• PHPMyAdmin - Error 500

  - by christian.thomas

  Have scoured the board but can't seem to find anything that's helped yet. If I go to http://localhost/ it's fine, if I go to http://localhost/phpmyadmin I get an 'Error 500: Internal Server Error' There doesn't seem to be anything that'll show up in the log files either. I've tried the RewriteLog as mentioned in PHPMyAdmin 500 Internal Server Error - But that doesn't really seem to help either, nothing gets written to it when I've got: # Logfiles ErrorLog /home/www/beta.**.com/logs/error.log CustomLog /home/www/beta.**.com/logs/access.log combined RewriteLog /home/www/beta.**.com/logs/rewrite.log RewriteLogLevel 9 I've tried uninstalling the package and re-installing it, but that's not helped either. Anyone got any other suggestions? I'm running Debian and Apache 2.

  Read the article

• How to archive Exchange mailboxes remotely?

  - by amyassin

  We have an environment that is based on an Active Directory domain (running Windows Server 2003 SP2), an internal email system using Exchange Server 2003 (internal mailbox, nothing online), and the clients run a mixture of MS Outlook 2007&2010, with the majority running 2007. Recently we noticed that Exchange server is taking so much space for mailboxes. We are examining some solutions to reduce space, and it seems that we could make use of the archiving feature to archive older messages. I can set the auto-archive option manually for every individual user, but is there any other easier way to automate that task? Is there any feature in exchange server or active directory domain that enables setting that as a kind of policy or something similar, or a script to be scheduled to run by all users?

  Read the article

• Why do we still have to use drive letters to identify file systems?

  - by Charles E. Grant

  A friend has run into a problem where they installed Windows 7 from an external drive, and the internal boot drive is now assigned to H:. Theoretically this shouldn't cause problems because there are programming interfaces for getting the drive letter for the system drive. In practice though, there are quite a few programs that assume that C: is the only possible location for the system directories, and they refuse to run with the system directories on H:. That's not Microsoft's fault, but it's a pain none-the-less. The general consensus seems to be that a re-install, setting the internal boot drive to C:, is the only way to avoid fix these problems. UNIX-like systems display all file systems in a single unified directory tree and mostly seem to avoid problems like this. Is it possible to configure a Windows system without reference to drive letters, or does the importance of backwards compatibility mean that Windows will be working with drive letters from now until doomsday?

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• FreeBSD 8 and Samba 3.3 smb_panic

  - by scraft3613

  What is causing samba to crash? Need help diagnosing ... [2010/06/14 16:11:42, 0] lib/fault.c:fault_report(40) =============================================================== [2010/06/14 16:11:42, 0] lib/fault.c:fault_report(41) INTERNAL ERROR: Signal 11 in pid 951 (3.3.8) Please read the Trouble-Shooting section of the Samba3-HOWTO [2010/06/14 16:11:42, 0] lib/fault.c:fault_report(43) From: http://www.samba.org/samba/docs/Samba3-HOWTO.pdf [2010/06/14 16:11:42, 0] lib/fault.c:fault_report(44) =============================================================== [2010/06/14 16:11:42, 0] lib/util.c:smb_panic(1673) PANIC (pid 951): internal error [2010/06/14 16:53:40, 0] smbd/server.c:main(1274) Edit: A bit more info -- log.smbd: [2010/06/14 15:59:02, 0] smbd/server.c:main(1274) smbd version 3.3.8 started. Copyright Andrew Tridgell and the Samba Team 1992-2009 [2010/06/14 15:59:02, 0] printing/print_cups.c:cups_connect(103) Unable to connect to CUPS server localhost:631 - Connection refused [2010/06/14 15:59:02, 0] printing/print_cups.c:cups_connect(103) Unable to connect to CUPS server localhost:631 - Connection refused smb.conf [global] workgroup = WASH netbios name = PROD1 [media] path = /jon/media read only = no guest ok = yes

  Read the article

• water cooler fan in my computer room............

  - by metal gear solid

  Is using water cooler fan in my computer room HARMFUL for the internal parts of the computer system?

  Read the article

• Configuring a PIX 506e for Asterisk

  - by orthogonal3

  Hi all! I'm having problems configuring a old Cisco PIX running 6.3 and wondered if anyone can lend a hand? Simply put I have a PIX 506e that I want to put in my VoIP data path. I can't update it and getting a compat version of Java for that version of PIX is tough so I can't log onto the web interface. The PIX straddles two networks..... 192.168.5.0 on the inside, ...50.0 on the outside both net masks are 255.255.255.0 I have a local Asterisk server cluster with a single service IP (<local asterisk>) SIP is on UDP 5060 and RTP (for the voip data) is on UDP 18000-18999 I know thats a big range but hey may as well. I need the 192.168.5.0 net to have web and ftp access for updates and the like. DHCP, DNS and NTP is already provided on that network so I don't need external DNS access. So I think I want the following rules: SIP or RTP from <my itsp> arriving at <outside voip ip> NATed to <local asterisk> SIP or RTP able to do the reverse route (should be covered by high sec - low sec??) HTTP and FTP access outbound for software update for the servers etc I have the following config at the minute - and I think I'm almost there (I hope)... interface ethernet0 auto interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password wouldyouliketobeapeppertoo encrypted passwd wouldyouliketobeapeppertoo encrypted hostname afirewall domain-name adomain fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 access-list acl_ping permit icmp any any access-list voip permit ip host <my itsp> host <local asterisk> mtu outside 1500 mtu inside 1500 ip address outside <outside pix ip> 255.255.255.0 ip address inside <inside pix ip> 255.255.255.0 arp timeout 14400 global (outside) 1 <outside generic ip> nat (inside) 1 192.168.5.0 255.255.255.0 0 0 static (inside,outside) <outside voip ip> <local asterisk> netmask 255.255.255.255 0 0 static (outside,inside) <local asterisk> <outside voip ip> netmask 255.255.255.255 0 0 access-group acl_ping in interface outside access-group acl_ping in interface inside route outside 0.0.0.0 0.0.0.0 <my next hop router> 1 route outside <my itsp> 255.255.255.255 <my next hop router> 1 I think I just need a hand with the access-lists and NAT/static rules. Would anyone be able to help as I've RTFM'd the Cisco docs a few times and they're heavy. Wishing I'd completed my CCNA now! Thanks all for any help, Phil

  Read the article

• Virtualizing Firewalls/UTM

  - by TheD

  So Sophos UTM (Astaro Gateway UTM) can be virtualized in Hyper-V, VMWare, vSphere etc. Now I'm new to virtualization, so am wondering how the networking would be configured in this situation. Imagine the following (a very simple setup). A Zyxel router acting as the default gateway, standard ADSL line. This is connected directly via Ethernet to my VHost, Hyper-V in my case. Now I assume I need two virtual network adapters, one which is the "External" interface to the firewall, and the other being the "Internal" interface. But where does my switch go, since I have 5 machines (or X number of machines). Where is the switch connected, to the internal interface on the VHost? What default gateway do my clients use etc? How would the routing work if these two interfaces weren't bridged since they are virtual networks anyway. I'm a little confused! Any advice is much appreciated! Cheers

  Read the article

• The speed of copying a file from a PC to a USB Flash drive started at 30MB/s and decreased to 5.8 MB

  - by Jian Lin

  If I copy a 8GB file from the PC to a USB Flash Drive, the speed will start at around 30 MB/s... maybe 28 MB/s, and then gradually, after a minute, it will go down to 15 MB/s and finally settle down at 5.8 MB/s. But I thought if it is a hard drive, then probably there is the RAM cache and also the internal hard drive cache, and will make the copying of file from PC to hard drive appear fast at first. But for a USB Flash drive, there should be no internal cache for the USB Flash drive itself. Is there a RAM cache for it, so that's why the initial copying seems so fast?

  Read the article

• SQL Server 2000 and SSL Encryption

  - by Angry_IT_Guru

  We are a datacenter that hsots a SQL Server 2000 environment which provides database services for a product we sell that is loaded as a rich-client applicatin at each of our many clients and their workstations. Currently today, the application uses straight ODBC connections from the client site to our datacenter. We need to begin encrypting the credentials -- since everything is clear-text today and the authentication is weakly encrypted -- and I'm trying to determine the best way to implement SSL on the server with minimizing the impact of the client. A few things, however: 1) We have our own Windows domain and all our servers are joined to our private domain. Our clietns no nothing of our domain. 2) Typically, our clients connect to our datacenter servers either by: a) Using TCP/IP address b) Using a DNS name that we publish via internet, zone transfers from our DNS servers to our customers, or the client can add static HOSTS entries. 3) From what I understand from enabling encryption is that I can go to the Network Utility and select the "encryption" option for the protocol that I wish to encrypt. Such as TCP/IP. 4) When the encryption option is selected, I have a choice of installing a third-party certificate or a self-signed. I have tested the self-signed, but do have potential issues. I'll explain in a bit. If I go with a third-party cert, such as Verisign, or Network solutions... what kind of certificate do I request? These aren't IIS certificates? When I go create a self-signed via Microsoft's certificate server, I have to select "Authentication certificate". What does this translate to in the third-party world? 5) If I create a self-signed certificate, I understand that the "issue to" name has to match the FQDN for the server that is running SQL. In my case, I have to use my private domain name. If I use this, what does this do for my clients when trying to connect to my SQL Server? Surely they cannot resolve my private DNS names on their network.... I've also verified that when the self-signed certificate is installed, it has to be in the local personal store for the user account that is running SQL Server. SQL Server will only start if the FQDN matches the "issue to" of the certificate and SQL is running under the account that has the certificate installed. If I use a self-signed certificate, does this mean I have to have every one of my clients install it to verify? 6) If I used a third-party certificate, which sounds like the best option, do all my clients have to have internet access when accessing my private servers of their private WAN connection to use to verify the certificate? What do I do about the FQDN? It sounds like they have to use my private domain name -- which is not published -- and can no longer use the one that I setup for them to use? 7) I plan on upgrading to SQL 2000 soon. Is setup of SSL any easier/better with SQL 2005 than SQL 2000? Any help or guiadance would be appreciated

  Read the article

• Any limitations for putting an SSD in a Mini? How fast would an external HDD be via Firewire? Is Ser

  - by Cyrcle

  I'm considering getting a Mini for web programming. I do a lot of text searches so I want to put a SSD in it. Does the Mini have any limitations that might effect the performance of a SSD? I'm trying to decide if I should get a Mini Server. I'd like to be able to have two internal drives so one can be SSD for OS and the code I'm working on, and the other can be my storage drive. However, I'm not sure if I'll be using the extra functionality of the server edition OSX or not, so I'm reluctant to pay the $200 premium. In a "regular" Mini I could put the SSD internal and use an external big drive, but would the external drive be fast enough via Firewire? Thanks in advance for any info.

  Read the article

• Squid on windows loadbalancing only to one server

  - by Martin L.

  After thousands of googles and trying days i cant get the load balancer/failover in squid on windows to work. Iam using squid 2.7. My webservers are 2 single NIC lighttpd and one dual nic lighttpd. server1 in this example is running squid on port 80 and lighttpd on port 8080 (just to test) Requirements: All 3 webservers running lighttpd should be balanced two option for load balancing: Best would be if server1 is busy server2 takes over, if server2 is busy server3 takes over, etc.. Round robin style evenly distributed load. Eg server1 takes first call, server2 second etc.. All requests should be treated the same way (no url rewriting or so on) Sent host headers have to be redirected to every server as http host header, speaking of "server1", "server1.company.internal" and "10.211.1.1". My approach: acl all src all acl manager proto cache_object http_port 80 accel defaultsite=server1.company.internal vhost #reverse proxy entries cache_peer 10.211.2.1 parent 8080 0 no-query originserver round-robin login=PASS name=server1_nic1 cache_peer 10.211.1.2 parent 80 0 no-query originserver round-robin login=PASS name=server2_nic1 cache_peer 10.211.2.3 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic1 cache_peer 10.211.2.4 parent 8080 0 no-query originserver round-robin login=PASS name=server3_nic2 #decl of names of squid host acl registered_name_hostdomain dstdomain server1.company.internal acl registered_name_host dstdomain server1 #ip of squid host acl registered_name_ip dstdomain 10.211.2.1 # access: redirects the correct squid hostname http_access allow registered_name_hostdomain http_access allow registered_name_host http_access allow registered_name_ip http_access deny all cache_peer_access server1_nic1 allow registered_name_hostdomain cache_peer_access server1_nic1 allow registered_name_host cache_peer_access server1_nic1 allow registered_name_ip cache_peer_access server2_nic1 allow registered_name_hostdomain cache_peer_access server2_nic1 allow registered_name_host cache_peer_access server2_nic1 allow registered_name_ip cache_peer_access server3_nic1 allow registered_name_hostdomain cache_peer_access server3_nic1 allow registered_name_host cache_peer_access server3_nic1 allow registered_name_ip cache_peer_access server3_nic2 allow registered_name_hostdomain cache_peer_access server3_nic2 allow registered_name_host cache_peer_access server3_nic2 allow registered_name_ip cache_peer_access server1_nic1 deny all cache_peer_access server2_nic1 deny all cache_peer_access server3_nic1 deny all cache_peer_access server3_nic2 deny all never_direct allow all Problems: Load balancer does not load balance other than to first server. Only if the first server is killed in any way the second will take over. I have seen the others working at some point, but definitely not as the intended load balancing described above. If the cache_peer_access is not defined sometimes the wrong hostname is sent to the backend webserver and this always depends on the defaultsite= parameter. Probably because the host header on the request to squid is not set and its replaced by defaultsite. Leaving out defaultsite didnt solve the problem. The only workaround i found for this is the current approach with cache_peer_access. Questions: Does the cache_peer_access influence the round-robin? Is there a better workaround to pass the host header to the backed webservers? Which parameters do increase the speed of load balancing or does anyone have a better approach? -Martin

  Read the article

• What is the best IP/Subnet set up strategy for a multi-server webhosting setup?

  - by Roy Andre

  Sorry for the mixed-up title, but let me try to explain better: We run a hosting solution, which until now has supported shared hosting and VPSes. Easy enough. We are now getting larger clients which require a more complex setup. We have more or less settled the server-setup itself, which will consist of: 1-2 Frontend Proxy/Load balancing servers 2+ Application servers 1 Database server 1 optional Memcached server The issue we are dealing with is to agree on a flexible and easy-to-maintain IP setup. So far we've been into VLAN'ing the internal servers in its own subnet, we've though of assigning an official IP to each server, and so on. What will be the best approach here? Any best practices? Using one official IP on the Frontend server, and then just set up an internal subnet for the servers behind that? We could then just NAT in any eventual sources required to access for instance the DB server directly over 3306.

  Read the article

• Windows 7: how can I add an IP range in the "route" command?

  - by KeyStroke

  Hi, I'm using two network connections, and I tried using the "route" command so that when I access a specific internal IP on my LAN, it would use connection 1, anything else would go normally through connection 2 (which doesn't have access to my LAN). The problem is I have a bunch of internal IP's that I need to access, and the "route" command doesn't seem to allow me to add an IP range instead of specific IP. And connection 1 doesn't have internet access, so I can't use it as my default connection. Any idea how this can be solved? Your help is appreciated

  Read the article

• FastCgiModule Error 500 on Windows7 Ultimate + IIS 7.5

  - by user63179

  I'm running IIS 7.5 on Windows 7 Ultimate. I've installed PHP Version 5.2.14 using Microsoft Web Platform Installer. I've created a virtual directory and a file with which I can browse it and it returns all the PHP information just fine. I'm trying to install MantisBT, and when I copy all the file to my virtual directory and browse index.php I receive the following error detail: Error Summary HTTP Error 500.0 - Internal Server Error The page cannot be displayed because an internal server error has occurred. Detailed Error Information Module FastCgiModule Notification ExecuteRequestHandler Handler PHP_via_FastCGI Error Code 0x00000000 Requested URL http://localhost:80/mantisbt/index.php Physical Path V:\wwwroot\mantisbt\index.php Logon Method Anonymous Logon User Anonymous I've changed these in the php.ini file: fastcgi.impersonate = 1 fastcgi.logging = 0 cgi.fix_pathinfo=1 cgi.force_redirect = 0 The Handler Mappings have this information: Request path: *.php Module: FastCgiModule Executable: C:[Path to PHP installation]\php-cgi.exe Name: PHP_via_FastCGI Thank you for any advice on this!!

  Read the article

• When exchange receives message, send notification to another address

  - by Rick Kierner

  I have an internal exchange 2010 server that receives no outside email and sends no email outside. I'd like to send a notification email to an outside email when a user receives a message on the internal exchange server. This message would simply say "A Message has been sent to your XYZ Email, go check it" Theoretically, the AD would have an external email address associated with the user's AD Account. I'm hoping that a process could be triggered when an email is received on this exchange server and I could take some type of action to look up the AD account for the recipient, grab the external email address and send a standard email to that user. This would be a global rule for all exchange accounts. The problem is that I don't know where to start. Thanks!

  Read the article

• Linux and Windows machines sharing a network

  - by Saif Bechan

  I have different Windows and Linux machines that share an internal private network. From within this network I can SSH to every machine etc. This internal network works great. I have my main windows machine from where I control these machines either trough SSH or virtual desktop. Is there a way for me on my main machine to see all the machines that are connected to the network. I want to be able to see all the machines and maybe browse them, share files etc. I am very new to networking of this kind so any recommendations are welcome. Should I set up this network by workgroup? I do not think Linux supports that. Or should I set up the network with domain, I never did that before.

  Read the article

• I'll be setting up a dedicated web server at work soon, my first non hobby server - What should I know?

  - by Rogue Coder

  I've been running my own dedicated server running CentOS and a LAMP stack for 2-3 years now, but it's only been hosting my own websites which aren't super important. However, I will soon be setting up a Linux Webserver and Linux Database Server at work, and I'm wondering what are some important things I should be doing. It's an internal server only, so only people in the company can access it. Should I get a slave server for both of my servers for backups? If I do this, how many backups should I be keeping and how often should those backups be done? Right now on my current server I run a cron job nightly to backup my MySQL databases (Usually 40mb files once compressed), and bi-weekly cron jobs to backup my web root. I just store these files on my local computer via FTP. Also, for an internal server like this, should I look at using LightHTTPD or NginX to increase performance, or will Apache be fine?

  Read the article

• Exchange 2007 - Distribution group not work correctly

  - by AlexB

  I have simple server Windows 2008 Standart SP2 with Exchange 2007 with apply SP1. Only one DC and one Exchange server (not exist Edge) in the same server. I have first distribution group by name "[email protected]" with 10 users. Working with internal and external mail correctly. I have second distribution group by name "[email protected]" with 3 users. Working with internal mail correctly, but external mail delivery failed 2 from 3 users. Only 1 users proclaims that external mail delivered correctly. Those 3 users they are too member of distribution group [email protected]" . I am not found in the eventlog any problem with Exchange server. Any user and any distribution group not check the box "Require that all senders are authenticated." Any ideas on how to solve the problem?

  Read the article

• Connecting guest OS to host os internet connection hyper-v

  - by autrevo

  Hyper-V internal switch and VM OS interfacing with Guest OS and IP Cofiguration When configuring hyper-v internal switch, Apart from physical lan adapter (say adapter 1), I see another LAN adapter (say adapter 2) added in host os. And we already have one virtual lan adapter in guest os, (say adapter 3) . adapter 1 is connected to internet with defaulty gateway say, 192.168.0.254 and uses class C IP. By con configuring adapter 2 and 3, I need to acheive two purpose - Access internet in guest os. seemlessly share files & folders between guest and host OS. Please, suggest, What is the best way to configure IP of these three adapters ?

  Read the article

• KVM with one host IP and a different subnet for machines

  - by Jguy

  I've already setup a KVM host with proper IP configurations, but my host had me create DHCP and use that to assign the IP's to the machines. I want to see if there's an easier way to do it (or better). Upon my first setting out on this, I didn't find anything that pointed me in the right direction. I'm coming off a fresh install of Debian 6.0 x64, so I have nothing installed. I've logged in, queried for the below information and changed the password from my host set one. I have a Debian 6.0 x64 system with the following initial network configuration (substituted 255 in place of my real first octave): # tail /etc/network/interfaces auto eth0 iface eth0 inet static address 255.9.24.80 broadcast 255.9.24.95 netmask 255.255.255.224 gateway 255.9.24.65 # default route to access subnet up route add -net 255.9.24.64 netmask 255.255.255.224 gw 255.9.24.65 eth0 I have a /29 subnet that I want the virtual machines to use from my host: IP: 255.46.187.152 /29 Mask: 255.255.255.248 Broadcast: 255.46.187.159 Usable IP addresses: 255.46.187.153 to 255.46.187.158 I like the interface of Cloudmin, so I want to try and use that if I can to administrate my guests. So, my questions: How do I set this up on the host system the best so that I can use the additional Subnet IP's on the guests and have them accessible from the internet? I also need to host a DNS server, which means one of these VM's has to have two IP's assigned to it and accessable from the outside world. How can I do that using Cloudmin? I had a question about this here: Multiple IP addresses assigned to one KVM VM But I just reformatted the entire server and am trying to figure out a better way of doing this. Machine information: # ip route show 255.9.24.64/27 via 255.9.24.65 dev eth0 255.9.24.64/27 dev eth0 proto kernel scope link src 255.9.24.80 default via 255.9.24.65 dev eth0 brctl is empty # ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether c8:60:00:54:b5:d8 brd ff:ff:ff:ff:ff:ff inet 255.9.24.80/27 brd 255.9.24.95 scope global eth0 inet6 fe80::ca60:ff:fe54:b5d8/64 scope link valid_lft forever preferred_lft forever Thank you for any help you can provide me. EDIT: I've installed kvm and cloudmin: aptitude install qemu-kvm libvirt-bin wget http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-kvm-debian-install.sh ./cloudmin-kvm-debian-install.sh Rebooted and now my network configuration looks like this: # device: eth0 iface eth0 inet manual # default route to access subnet iface br0 inet static address 255.9.24.80 netmask 255.255.255.224 broadcast 255.9.24.95 network 255.9.24.64 bridge_ports eth0 gateway 255.9.24.65 I setup in Cloudmin the Start IP as 255.46.187.153 and End IP as 255.46.187.158. The CIDR is 29 and the gateway is 255.46.187.152. I've installed a guest with ubuntuserver 12.04 x64, which was able to get and retrieve internet resources during installation, but now cannot reach anything nor can it be reached from anything. Its network configuration is: iface eth0 inet static address 255.46.187.153 netmask 255.255.255.224 broadcast 255.46.187.159 gateway 255.46.187.152 dns-nameservers <host provided nameservers> And is not able to ping google.com through DNS or direct IP, I can't ping the VM from the outside or the host. any ideas now?

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >