Search Results

Search found 6828 results on 274 pages for 'mobile gaming'.

Page 162/274 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

  • Boot custom linux up by pressing Lenovo OKR button?

    - by Semmu
    I have a Lenovo Y510p laptop and I'm a Linux user, use Windows only for gaming. The device had no OS when I bought it and I also installed an SSD besides the 1TB hard drive. I would like to "hack" the One-Key-Recovery button, because I have no interest in its default behaviour (I don't need Windows recovery), but if I could boot up a hidden, fail-safe Linux with it, that would be great. How could I achieve it? I tried to search what the button does, but I only found some installers for Windows that could magically create a partition for the recovery. I would like to override this behaviour completely to boot up something else.

    Read the article

  • Nvidia GT 240 problem

    - by user36912
    My Nvidia card GT 240 stops working on windows-7/windows xp. When it stops the screen is disturbed and whole computer halted. (also a continuous sound comes from speaker toonnnnn..). Not sure when exactly it occurs but mostly when i try to play some video in youtube or playing some audio. It works fine in gaming. I have latest driver installed from nvidea site. Any help? My model is EVGA GT 240

    Read the article

  • DVI vs HDMI graphics card output

    - by Shack
    Asking on behalf of someone: I want to buy a new graphics card but do not know which would be best in terms of output, DVI or HDMI, the sound part of the HDMI is not really required, I just need something to go to my new 32 inch hd tv. It accepts both DVI and HDMI. I only need it for basic gaming but mostly as a media center to watch movies and tv shows on. Also for windows media center's TV application, I need a tv card, should I get a graphics card with bult in tv card, or a usb dongle??

    Read the article

  • Fastest Memory (within reason) for a MotherBoard [on hold]

    - by sampson
    I was wondering if it would be OK to use DDR3 3000 memory with Asus Maximus VI Impact MotherBoard, Intel® Core™ i3-4130T Processor and Steamcom's FC8 case The purpose of this machine is for a HTPC (Home Theater Personal Computer) system, only, no gaming. The case is fan less as is the CPU cooling system. Also, would it be worth it, heat wise, to go past the 1600 memory type? I mean, would DDR 3000 make the box that much faster to make it worthwhile? The Processor has a TDP rating of 35 W. The memory specifications for the processor are: Memory Specifications Max Memory Size (dependent on memory type) 32 GB Memory Types DDR3-1333/1600 # of Memory Channels 2 Max Memory Bandwidth 25.6 GB/s ECC Memory Supported ‡ Yes The FC8 case's heat displacement system is rated at 95 W TDP

    Read the article

  • Application pool crashing regularly (8007006d) (Service Unavailable)

    - by Phil
    I have a basic web form site running. Nothing out of the ordinary. It is frequently crashing the application pool. The error code I got from the logs is '8007006d'. Googling this does not come up with the usual bevy of results.... I do get a few people with a similar problem. Any the advise seems to be that the error is related to registry permissions. Can anyone confirm / disconfirm this theory. That if I get error 8007006d it is definately a reg permissions problem? Here is the code from my page. I'm not seeing anything that would cause a memory leak or make this happen. It is basically just one big insert command with many parameters? Imports System.Web.Configuration Imports System.Data.SqlClient Imports System.Net.Mail Imports System.IO Imports System.Globalization Partial Class _Default Inherits System.Web.UI.Page Public Sub WriteError(ByVal errorMessage As String) Try Dim path As String = "~/Error/" & DateTime.Today.ToString("dd-mm-yy") & ".txt" If (Not File.Exists(System.Web.HttpContext.Current.Server.MapPath(path))) Then File.Create(System.Web.HttpContext.Current.Server.MapPath(path)).Close() End If Using w As StreamWriter = File.AppendText(System.Web.HttpContext.Current.Server.MapPath(path)) w.WriteLine(Constants.vbCrLf & "Log Entry : ") w.WriteLine("{0}", DateTime.Now.ToString(CultureInfo.InvariantCulture)) Dim err As String = "Error in: " & System.Web.HttpContext.Current.Request.Url.ToString() & ". Error Message:" & errorMessage w.WriteLine(err) w.WriteLine("__________________________") w.Flush() w.Close() End Using Catch ex As Exception WriteError(ex.Message) End Try End Sub Protected Sub Page_PreLoad(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.PreLoad otherlanguagespecify.Text = "Language: Speaking: Reading: Writing:" 'Show / hide 'other' panels ProvincePanel.Visible = False If Province.SelectedValue = "Other" Then ProvincePanel.Visible = True End If languagespanel.Visible = False If OtherLanguage.Checked Then languagespanel.Visible = True End If End Sub Protected Sub Submit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Submit.Click Dim areasexpertise As String = String.Empty Dim areasli As ListItem Dim english As String = String.Empty Dim connstring As String = WebConfigurationManager.ConnectionStrings("Str").ToString() Dim c As SqlConnection = New SqlConnection(connstring) Dim s As String = ("INSERT INTO [MBA_EOI]") & _ ("([subdate],[surname], [name], [dob], [nationality], [postaladdress],") & _ ("[province],[city], [postcode], [worktelephone],") & _ ("[hometelephone], [mobile], [email],[fax], [institution1],") & _ ("[institution2], [institution3], [institution4], [institutiondate1], [institutiondate2],") & _ ("[institutiondate3], [institutiondate4],[institutionquals1], [institutionquals2], [institutionquals3],") & _ ("[institutionquals4],[profdates1], [profdates2],") & _ ("[profdates3], [profdates4], [profdates5], [profdates6], [profdates7], ") & _ ("[profloc1], [profloc2], [profloc3], [profloc4], [profloc5],") & _ ("[profloc6], [profloc7], [profcomp1], [profcomp2], [profcomp3],") & _ ("[profcomp4], [profcomp5], [profcomp6], [profcomp7], [profpos1],") & _ ("[profpos2], [profpos3], [profpos4], [profpos5], [profpos6],") & _ ("[profpos7], [profdesc1], [profdesc2], [profdesc3], [profdesc4],") & _ ("[profdesc5],[profdesc6],[profdesc7], [company1], [company2],") & _ ("[company3], [company4], [company5], [nature1], [nature2],") & _ ("[nature3], [nature4], [nature5], [workdate1], [workdate2],") & _ ("[workdate3], [workdate4], [workdate5], [contactname1], [contactname2],") & _ ("[contactname3], [contactname4], [contactname5], [wtelephone1], [wtelephone2],") & _ ("[wtelephone3],[wtelephone4], [wtelephone5], [philosophy], [publications],") & _ ("[english], [otherlanguage], [areasofexpertise], [otherareasofexpertise],") & _ ("[assessortrue], [coordinatortrue], [facilitatortrue], [moderatortrue], [productdevelopertrue],") & _ ("[projectmanagertrue], [assessorexp], [coordinatorexp], [facilitatorexp], [moderatorexp],") & _ ("[productdeveloperexp], [projectmanagerexp], [assessorlvl], [coordinatorlvl], [facilitatorlvl],") & _ ("[moderatorlvl], [productdeveloperlvl], [projectmanagerlvl], [assessorpref], [coordinatorpref],") & _ ("[FacilitatorPref], [ModeratorPref], [ProductDeveloperPref], [ProjectManagerPref], [designation], [professortrue],") & _ ("[professorlvl], [professorexp], [professorpref], [lecturertrue], [lecturerpref], [lecturerlvl], [lecturerexp], [affiliations], [educationmore], ") & _ ("[wemail1], [wemail2], [wemail3], [wemail4], [wemail5])") & _ ("VALUES") & _ ("(@subdate, @surname, @name, @dob, @nationality, @postaladdress,") & _ ("@province,@city, @postcode, @worktelephone,") & _ ("@hometelephone, @mobile, @email, @fax, @inst1,") & _ ("@inst2, @inst3, @inst4, @instdate1, @instdate2,") & _ ("@instdate3, @instdate4, @instquals1, @instquals2, @instquals3,") & _ ("@instquals4, @profdates1, @profdates2,") & _ ("@profdates3, @profdates4, @profdates5, @profdates6, @profdates7,") & _ ("@profloc1, @profloc2, @profloc3, @profloc4, @profloc5,") & _ ("@profloc6, @profloc7, @profcomp1, @profcomp2, @profcomp3,") & _ ("@profcomp4, @profcomp5, @profcomp6, @profcomp7, @profpos1,") & _ ("@profpos1, @profpos1, @profpos4, @profpos5, @profpos6,") & _ ("@profpos7, @profdesc1, @profdesc2, @profdesc3, @profdesc4,") & _ ("@profdesc5, @profdesc6, @profdesc7, @company1, @company2,") & _ ("@company3, @company4, @company5,@nature1, @nature2,") & _ ("@nature3, @nature4, @nature5, @workdate1, @workdate2,") & _ ("@workdate3, @workdate4, @workdate5, @contactname1, @contactname2,") & _ ("@contactname3, @contactname4, @contactname5, @wtelephone1, @wtelephone2,") & _ ("@wtelephone3,@wtelephone4, @wtelephone5, @philosophy, @publications,") & _ ("@english, @otherlanguage, @areasofexpertise, @otherareasofexpertise,") & _ ("@assessor, @coordinator, @facilitator, @moderator, @productdeveloper,") & _ ("@projectmanager, @assessorexp, @coordinatorexp, @facilitatorexp, @moderatorexp,") & _ ("@productdeveloperexp, @projectmanagerexp, @assessorlvl, @coordinatorlvl, @facilitatorlvl,") & _ ("@moderatorlvl, @productdeveloperlvl, @projectmanagerlvl, @assessorpref, @coordinatorpref,") & _ ("@facilitatorpref, @moderatorpref, @productdeveloperpref, @projectmanagerpref, @designation, @professor, @professorlvl, @professorexp, @professorpref,") & _ ("@lecturer, @lecturerpref, @lecturerlvl, @lecturerexp, @affiliations, @educationmore, ") & _ ("@wemail1, @wemail2, @wemail3, @wemail4, @wemail5)") 'Setup birthday Dim birthdaystring As String = MonthBirth.SelectedValue.ToString & "/" & DayBirth.SelectedValue.ToString & "/" & YearBirth.SelectedValue.ToString Dim birthday As DateTime = Convert.ToDateTime(birthdaystring) Try Dim x As New SqlCommand(s, c) x.Parameters.AddWithValue("@subdate", DateTime.Now()) x.Parameters.AddWithValue("@surname", Surname.Text) x.Parameters.AddWithValue("@name", Name.Text) x.Parameters.AddWithValue("@dob", birthday) x.Parameters.AddWithValue("@nationality", Nationality.Text) x.Parameters.AddWithValue("@postaladdress", Postaladdress.Text) x.Parameters.AddWithValue("@designation", Designation.SelectedItem.ToString) 'to control whether or not 'other' province is selected If Province.SelectedValue = "Other" Then x.Parameters.AddWithValue("@province", Otherprovince.Text) Else x.Parameters.AddWithValue("@province", Province.SelectedValue.ToString) End If x.Parameters.AddWithValue("@city", City.Text) x.Parameters.AddWithValue("@postcode", Postcode.Text) x.Parameters.AddWithValue("@worktelephone", Worktelephone.Text) x.Parameters.AddWithValue("@hometelephone", Hometelephone.Text) x.Parameters.AddWithValue("@mobile", Mobile.Text) x.Parameters.AddWithValue("@email", Email.Text) x.Parameters.AddWithValue("@fax", Fax.Text) 'Add education params to x command x.Parameters.AddWithValue("@inst1", Institution1.Text) x.Parameters.AddWithValue("@inst2", Institution2.Text) x.Parameters.AddWithValue("@inst3", Institution3.Text) x.Parameters.AddWithValue("@inst4", Institution4.Text) x.Parameters.AddWithValue("@instdate1", Institutiondates1.Text) x.Parameters.AddWithValue("@instdate2", Institutiondates2.Text) x.Parameters.AddWithValue("@instdate3", Institutiondates3.Text) x.Parameters.AddWithValue("@instdate4", Institutiondates4.Text) x.Parameters.AddWithValue("@instquals1", Institution1quals.Text) x.Parameters.AddWithValue("@instquals2", Institution2quals.Text) x.Parameters.AddWithValue("@instquals3", Institution3quals.Text) x.Parameters.AddWithValue("@instquals4", Institution4quals.Text) 'Add checkbox params to x command Dim eli As ListItem For Each eli In EnglishSkills.Items If eli.Selected Then english += eli.Text + " | " End If Next x.Parameters.AddWithValue("@english", english) For Each areasli In Expertiselist.Items If areasli.Selected Then areasexpertise += " ; " & areasli.Text End If Next x.Parameters.AddWithValue("@areasofexpertise", areasexpertise) If OtherLanguage.Checked.ToString Then x.Parameters.AddWithValue("@otherlanguage", otherlanguagespecify.Text) Else x.Parameters.AddWithValue("@otherlanguage", DBNull.Value) End If 'Add competencies params to x command x.Parameters.AddWithValue("@assessor", AssessorTrue.Checked) x.Parameters.AddWithValue("@coordinator", CoordinatorTrue.Checked) x.Parameters.AddWithValue("@facilitator", FacilitatorTrue.Checked) x.Parameters.AddWithValue("@moderator", ModeratorTrue.Checked) x.Parameters.AddWithValue("@productdeveloper", ProductDeveloperTrue.Checked) x.Parameters.AddWithValue("@projectmanager", ProjectManagerTrue.Checked) x.Parameters.AddWithValue("@assessorexp", Assessorexp.Text) x.Parameters.AddWithValue("@coordinatorexp", coordinatorexp.Text) x.Parameters.AddWithValue("@facilitatorexp", facilitatorexp.Text) x.Parameters.AddWithValue("@moderatorexp", moderatorexp.Text) x.Parameters.AddWithValue("@productdeveloperexp", productdeveloperexp.Text) x.Parameters.AddWithValue("@projectmanagerexp", projectmanagerexp.Text) x.Parameters.AddWithValue("@assessorlvl", Assessorlevel.Text) x.Parameters.AddWithValue("@coordinatorlvl", Coordinatorlevel.Text) x.Parameters.AddWithValue("@facilitatorlvl", Facilitatorlevel.Text) x.Parameters.AddWithValue("@moderatorlvl", Moderatorlevel.Text) x.Parameters.AddWithValue("@productdeveloperlvl", Productdeveloperlevel.Text) x.Parameters.AddWithValue("@projectmanagerlvl", Projectmanagerlevel.Text) x.Parameters.AddWithValue("@assessorpref", AssessorPref.Text) x.Parameters.AddWithValue("@coordinatorpref", CoordinatorPref.Checked) x.Parameters.AddWithValue("@facilitatorpref", FacilitatorPref.Checked) x.Parameters.AddWithValue("@moderatorpref", ModeratorPref.Checked) x.Parameters.AddWithValue("@productdeveloperpref", ProductDeveloperPref.Checked) x.Parameters.AddWithValue("@projectmanagerpref", ProjectManagerPref.Checked) x.Parameters.AddWithValue("@professorpref", ProfessorPref.Checked) x.Parameters.AddWithValue("@professorlvl", Professorlevel.Text) x.Parameters.AddWithValue("@professor", ProfessorTrue.Checked) x.Parameters.AddWithValue("@professorexp", professorexp.Text) x.Parameters.AddWithValue("@lecturerpref", LecturerPref.Checked) x.Parameters.AddWithValue("@lecturerlvl", Lecturerlevel.Text) x.Parameters.AddWithValue("@lecturer", LecturerTrue.Checked) x.Parameters.AddWithValue("@lecturerexp", lecturerexp.Text) 'Add professional experience params to x command x.Parameters.AddWithValue("@profdates1", ProfDates1.Text) x.Parameters.AddWithValue("@profdates2", ProfDates2.Text) x.Parameters.AddWithValue("@profdates3", ProfDates3.Text) x.Parameters.AddWithValue("@profdates4", ProfDates4.Text) x.Parameters.AddWithValue("@profdates5", ProfDates5.Text) x.Parameters.AddWithValue("@profdates6", ProfDates6.Text) x.Parameters.AddWithValue("@profdates7", ProfDates7.Text) x.Parameters.AddWithValue("@profloc1", ProfDates1.Text) x.Parameters.AddWithValue("@profloc2", ProfDates2.Text) x.Parameters.AddWithValue("@profloc3", ProfDates3.Text) x.Parameters.AddWithValue("@profloc4", ProfDates4.Text) x.Parameters.AddWithValue("@profloc5", ProfDates5.Text) x.Parameters.AddWithValue("@profloc6", ProfDates6.Text) x.Parameters.AddWithValue("@profloc7", ProfDates7.Text) x.Parameters.AddWithValue("@profcomp1", ProfCompany1.Text) x.Parameters.AddWithValue("@profcomp2", ProfCompany2.Text) x.Parameters.AddWithValue("@profcomp3", ProfCompany3.Text) x.Parameters.AddWithValue("@profcomp4", ProfCompany4.Text) x.Parameters.AddWithValue("@profcomp5", ProfCompany5.Text) x.Parameters.AddWithValue("@profcomp6", ProfCompany6.Text) x.Parameters.AddWithValue("@profcomp7", ProfCompany7.Text) x.Parameters.AddWithValue("@profpos1", Profpos1.Text) x.Parameters.AddWithValue("@profpos2", Profpos2.Text) x.Parameters.AddWithValue("@profpos3", Profpos3.Text) x.Parameters.AddWithValue("@profpos4", Profpos4.Text) x.Parameters.AddWithValue("@profpos5", Profpos5.Text) x.Parameters.AddWithValue("@profpos6", Profpos6.Text) x.Parameters.AddWithValue("@profpos7", Profpos7.Text) x.Parameters.AddWithValue("@profdesc1", ProfDesc1.Text) x.Parameters.AddWithValue("@profdesc2", ProfDesc2.Text) x.Parameters.AddWithValue("@profdesc3", ProfDesc2.Text) x.Parameters.AddWithValue("@profdesc4", ProfDesc4.Text) x.Parameters.AddWithValue("@profdesc5", ProfDesc5.Text) x.Parameters.AddWithValue("@profdesc6", ProfDesc6.Text) x.Parameters.AddWithValue("@profdesc7", ProfDesc7.Text) 'Add references parameters to x command x.Parameters.AddWithValue("@company1", company1.Text) x.Parameters.AddWithValue("@company2", company2.Text) x.Parameters.AddWithValue("@company3", company3.Text) x.Parameters.AddWithValue("@company4", company4.Text) x.Parameters.AddWithValue("@company5", company5.Text) x.Parameters.AddWithValue("@nature1", natureofwork1.Text) x.Parameters.AddWithValue("@nature2", natureofwork2.Text) x.Parameters.AddWithValue("@nature3", natureofwork3.Text) x.Parameters.AddWithValue("@nature4", natureofwork4.Text) x.Parameters.AddWithValue("@nature5", natureofwork5.Text) x.Parameters.AddWithValue("@workdate1", workdate1.Text) x.Parameters.AddWithValue("@workdate2", workdate2.Text) x.Parameters.AddWithValue("@workdate3", workdate3.Text) x.Parameters.AddWithValue("@workdate4", workdate4.Text) x.Parameters.AddWithValue("@workdate5", workdate5.Text) x.Parameters.AddWithValue("@contactname1", ContactName1.Text) x.Parameters.AddWithValue("@contactname2", ContactName2.Text) x.Parameters.AddWithValue("@contactname3", ContactName3.Text) x.Parameters.AddWithValue("@contactname4", ContactName4.Text) x.Parameters.AddWithValue("@contactname5", ContactName5.Text) x.Parameters.AddWithValue("@wtelephone1", Telephone1.Text) x.Parameters.AddWithValue("@wtelephone2", Telephone2.Text) x.Parameters.AddWithValue("@wtelephone3", Telephone3.Text) x.Parameters.AddWithValue("@wtelephone4", Telephone4.Text) x.Parameters.AddWithValue("@wtelephone5", Telephone5.Text) x.Parameters.AddWithValue("@wemail1", Email1.Text) x.Parameters.AddWithValue("@wemail2", Email2.Text) x.Parameters.AddWithValue("@wemail3", Email3.Text) x.Parameters.AddWithValue("@wemail4", Email4.Text) x.Parameters.AddWithValue("@wemail5", Email5.Text) 'Add other areas of expertise parameter x.Parameters.AddWithValue("@otherareasofexpertise", Otherareasofexpertise.Text) 'Add philosophy / pubs / affils comands to x command x.Parameters.AddWithValue("@philosophy", learningphilosophy.Text) x.Parameters.AddWithValue("@publications", publicationdetails.Text) x.Parameters.AddWithValue("@affiliations", affiliations.Text) x.Parameters.AddWithValue("@educationmore", educationmore.Text) c.Open() x.ExecuteNonQuery() c.Close() Catch ex As Exception WriteError(ex.ToString) End Try 'If everyone is happy, redirect to thank you page If (Page.IsValid) Then Response.Redirect("Thanks.aspx") End If End Sub End Class

    Read the article

  • Can I Specify Strings for MySql Table Values?

    - by afterimagedesign
    I have a MySql table that stores the users state and city from a list of states and cities. I specifically coded each state as their two letter shortened version (like WA for Washington and CA for California) and every city has the two letter abbreviation and the city name formated like this: Boulder Colorado would be CO-boulder and Salt Lake City, Utah would be UT-salt-lake-city as to avoid different states with same city name. The PHP inserts the value (UT-salt-lake-city) under the column City, but when I call the variable through PHP, it displays like this: Your location is: UT-salt-lake-city, Utah. To solve this, I've been making this list of variables if ($city == "AL-auburn") { $city = "Auburn"; } else if ($city == "AL-birmingham") { $city = "Birmingham"; } else if ($city == "GA-columbus") { $city = "Columbus"; $state = "Georgia"; } else if ($city == "AL-dothan") { $city = "Dothan"; } else if ($city == "AL-florence") { $city = "Forence"; } else if ($city == "AL-muscle-shoals") { $city = "Muscle Shoals"; } else if ($city == "AL-gadsden-anniston") { $city = "Gadsden Anniston"; } else if ($city == "AL-huntsville") { $city = "Huntsville"; } else if ($city == "AL-decatur") { $city = "Decatur"; } else if ($city == "AL-mobile") { $city = "Mobile"; } else if ($city == "AL-montgomery") { $city = "Montgomery"; } else if ($city == "AL-tuscaloosa") { $city = "Tuscaloosa"; } Is there a way I can shorten this process or at least call it from a separate file so I don't have to copy/paste every time I want to call the location?

    Read the article

  • jQuery animating scroll top to 0 not working on Windows Phone

    - by cgoddard
    I have written a website which has a function that scrolls the users view to the top of the page. The call in question is: $('html,body').animate({scrollTop:0}, 150, 'swing'); This works fine on all desktop browsers, but on Windows Phone, it only scrolls the user up about 180 pixels, then stops. I have tried replacing the function with: $('html,body').scrollTop(0); It snaps to the top on desktops, but it scrolls to the top on the phone. I believe this need for Internet Explorer Mobile to try to smoothly animate the scrolling, and is causing the issue. If this is the case (or if not, could someone correct me), how can I override this function to get the animation to work? EDIT Although its not ideal, it does seem to work in a limited capacity, I have replaced the scroll code with this: $('html,body').animate({scrollTop:0}, 150, 'swing', function() { $('html,body').scrollTop(0); }); But it would be good to know if there is an option to disable the smooth scrolling in Mobile IE programatically.

    Read the article

  • Schedule multiple events with NSTimer?

    - by AWright4911
    I have a schedule cache stored in a pList. For the example below, I have a schedule time of April 13, 2010 2:00PM and Aril 13, 2010 2:05PM. How can I add both of these to a queue to fire on their own? item 0 -Hour --14 -Minute --00 -Month --04 -Day --13 -Year --2010 item 1 -Hour --14 -Minute --05 -Month --04 -Day --13 -Year --2010 this is how I am attempting to schedule multiple events to fire at specific date / time. -(void) buildScheduleCache { MPNotifyViewController *notifier = [MPNotifyViewController alloc] ; [notifier setStatusText:@"Rebuilding schedule cache, this will only take a moment."]; [notifier show]; NSCalendarDate *now = [NSCalendarDate calendarDate]; NSFileManager *manager = [[NSFileManager defaultManager] autorelease]; path = @"/var/mobile/Library/MobileProfiles/Custom Profiles"; theProfiles = [manager directoryContentsAtPath:path]; myPrimaryinfo = [[NSMutableArray arrayWithCapacity:6] retain]; keys = [NSArray arrayWithObjects:@"Profile",@"MPSYear",@"MPSMonth",@"MPSDay",@"MPSHour",@"MPSMinute",nil]; for (NSString *profile in theProfiles) { plistDict = [[[NSMutableDictionary alloc] initWithContentsOfFile:[NSString stringWithFormat:@"%@/%@",path,profile]] autorelease]; [myPrimaryinfo addObject:[NSDictionary dictionaryWithObjects: [NSArray arrayWithObjects: [NSString stringWithFormat:@"%@",profile], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSYear"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSMonth"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSDay"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSHour"]], [NSString stringWithFormat:@"%@",[plistDict objectForKey:@"MPSMinute"]], nil]forKeys:keys]]; profileSched = [NSCalendarDate dateWithYear:[plistDict objectForKey:@"MPSYear"] month:[plistDict objectForKey:@"MPSMonth"] day:[plistDict objectForKey:@"MPSDay"] hour:[plistDict objectForKey:@"MPSHour"] minute:[plistDict objectForKey:@"MPSMinute"] second:01 timeZone:[now timeZone]]; [self rescheduleTimer]; } NSString *testPath = @"/var/mobile/Library/MobileProfiles/Schedules.plist"; [myPrimaryinfo writeToFile:testPath atomically:YES]; } -(void) rescheduleTimer { timer = [[NSTimer alloc] initWithFireDate:profileSched interval:0.0f target:self selector:@selector(theFireEvent) userInfo:nil repeats:YES]; NSRunLoop *runLoop = [NSRunLoop currentRunLoop]; [runLoop addTimer:timer forMode:NSDefaultRunLoopMode]; }

    Read the article

  • latex list environment inside the tabular environment: extra line at top preventing alignment

    - by Usagi
    Hello good people of stackoverflow. I have a LaTeX question that is bugging me. I have been trying to get a list environment to appear correctly inside the tabular environment. So far I have gotten everything to my liking except one thing: the top of the list does not align with other entries in the table, in fact it looks like it adds one line above the list... I would like to have these lists at the top. This is what I have, a custom list environment: \newenvironment{flushemize}{ \begin{list}{$\bullet$} {\setlength{\itemsep}{1pt} \setlength{\parskip}{0pt} \setlength{\parsep}{0pt} \setlength{\partopsep}{0pt} \setlength{\topsep}{0pt} \setlength{\leftmargin}{12pt}}}{\end{list}} Renamed ragged right: \newcommand{\rr}{\raggedright} and here is my table: \begin{table}[H]\caption{Tank comparisons}\label{tab:tanks} \centering \rowcolors{2}{white}{tableShade} \begin{tabular}{p{1in}p{1.5in}p{1.5in}rr} \toprule {\bf Material} & {\bf Pros} & {\bf Cons} & {\bf Size} & {\bf Cost} \\ \midrule \rr Reinforced concrete &\rr \begin{flushemize}\item Strong \item Secure \end{flushemize}&\rr \begin{flushemize}\item Prone to leaks \item Relatively expensive to install \item Heavy \end{flushemize} & 100,000 gal & \$299,400 \\ \rr Steel & \begin{flushemize}\item Strong \item Secure \end{flushemize} & \begin{flushemize}\item Relatively expensive to install \item Heavy \item Require painting to prevent rusting \end{flushemize} & 100,000 gal & \$130,100 \\ \rr Polypropylene & \begin{flushemize}\item Easy to install \item Mobile \item Inexpensive \item Prefabricated \end{flushemize} & \begin{flushemize}\item Relatively insecure \item Max size available 10,000 gal \end{flushemize} & 10,000 gal & \$5,000 \\ \rr Wood & \begin{flushemize}\item Easy to install \item Mobile \item Cheap to install \end{flushemize} & \begin{flushemize}\item Prone to rot \item Must remain full once constructed \end{flushemize} & 100,000 gal & \$86,300\\ \bottomrule \end{tabular} \end{table} Thank you for any advice :)

    Read the article

  • Create a virtual serial port for widcomm stack under 32feet

    - by i13m
    Hi, all Currently I am doing a project involves a bluetooth communication setup between a PDA and a small embedded device. This small embedded device can only be communicated with a virtual serial port over a bluetooth link. The PDA is the ipaq running with windows mobile 6, and I am using c#. I had done a program which can communication with the serial port over bluetooth. But the only issue is every time I run this program, I have to active the bluetooth radio, and manually pairing this device with the pda via the bluetooth manager. What I want to do is when running this program, it can establish the bluetooth connection between the pda and the embedded module. So I am using functions from the 32feet prject. This is one issue is I cant make the virutal serial port part, as I think the 32feet project can only make virual serial ports for the window bluetooth stack but not the widcomm bluetooth stact, which the ipaq is using. Therefore, are there any existing c# classes or stacks that can make virtual serial port under widcomm for windows mobile 6. Thanks

    Read the article

  • Map tiling - What kind of projection?

    - by ikky
    Hi. I've taken a large image and divided it in to square tiles (256x256). It is made for google maps also, so the whole image is divided into z_x_y.png (Depending on zoom level). z=0 = 1x1 tile z=1 = 2x2 tilesthe z=2 = 4x4 tiles My imageMap is "flat" and is not based on a sphere like the worldmap. I'm gonna use this map on a windows mobile app (which has no google API), and all the "points of interests" is inserted into a database by longitude and latitude. And since i have to make this for the windows mobile, i just have XY coordinate system. Is it enough to just use this: MAP_WIDTH = 256*TILES_W; MAP_HEIGHT = 256*TILES_H; function convert(int lat, int lon) { int y = (int)((-1 * lat) + 90) * (MAP_HEIGHT / 180); int x = (int)(lon + 180) * (MAP_WIDTH / 360); ImagePoint p = new ImagePoint(x,y); // An object which holds the coordinates return p; } Or do i need a projection technique? Thanks in advance. Please ask, if something is unclear.

    Read the article

  • Detecting browser capabilities and selective events for mouse and touch

    - by skidding
    I started using touch events for a while now, but I just stumbled upon quite a problem. Until now, I checked if touch capabilities are supported, and applied selective events based on that. Like this: if(document.ontouchmove === undefined){ //apply mouse events }else{ //apply touch events } However, my scripts stopped working in Chrome5 (which is currently beta) on my computer. I researched it a bit, and as I expected, in Chrome5 (as opposed to older Chrome, Firefox, IE, etc.) document.ontouchmove is no longer undefined but null. At first I wanted to submit a bug report, but then I realized: There are devices that have both mouse and touch capabilities, so that might be natural, maybe Chrome now defines it because my OS might support both types of events. So the solutions seems easy: Apply BOTH event types. Right? Well the problem now take place on mobile. In order to be backward compatible and support scripts that only use mouse events, mobile browsers might try to fire them as well (on touch). So then with both mouse and touch events set, a certain handler might be called twice every time. What is the way to approach this? Is there a better way to check and apply selective events, or must I ignore the problems that might occur if browsers fire both touch and mouse events at times?

    Read the article

  • SSL HandShakeException: No_Certificate. Using IBM's J9 JVM and Apache Tomcat

    - by DaveJohnston
    I am developing a mobile application that is to run on a Windows Mobile PDA. The application is written in Java and to run it we are using the J9 JVM from IBM. The application communicates with an Apache Tomcat server over HTTP and we are trying to set it up now to use SSL. I have generated public/private keys for both the client and the server, exported their self signed certificates and imported them into the respective keystores. Initially I tried to just get it working using only server side authentication and that was successful. But I am now trying to get mutual authentication by setting clientAuth="true" in the server.xml file in the apache conf directory. I have enabled the SSL logging on the server and when the client connects the server reports an SSLProtocolException: handshake alert: no_certificate. The client logs also show an exception: javax.net.ssl.SSLHandshakeException: unexpected_message at com.ibm.j9.jsse.SSLSocketImpl.completeHandshake(Unknown Source) at com.ibm.j9.jsse.SSLSocketImpl.startHandshake(Unknown Source) at com.ibm.oti.net.www.protocol.https.HttpsURLConnection.openSocket(Unknown Source) at com.ibm.oti.net.www.protocol.https.HttpsURLConnection.connect(Unknown Source) at com.ibm.oti.net.www.protocol.https.HttpsURLConnection.sendRequest(Unknown Source) at com.ibm.oti.net.www.protocol.https.HttpsURLConnection.doRequest(Unknown Source) at com.ibm.oti.net.www.protocol.https.HttpsURLConnection.getInputStream(Unknown Source) The client keystore and truststore is configured by setting the following System Properties: javax.net.ssl.trustStore javax.net.ssl.trustStorePassword javax.net.ssl.keyStore javax.net.ssl.keyStorePassword Does anyone have any ideas how I can set up client authentication on the J9 JVM?

    Read the article

  • Uncatchable AccesViolationException

    - by Roy
    Hi all, I'm getting close to desperate.. I am developing a field service application for Windows Mobile 6.1 using C# and quite some p/Invoking. (I think I'm referencing about 50 native functions) On normal circumstances this goes without any problem, but when i start stressing the GC i'm getting a nasty 0xC0000005 error witch seems uncatchable. In my test i'm rapidly closing and opening a dialog form (the form did make use of native functions, but for testing i commented these out) and after a while the Windows Mobile error reporter comes around to tell me that there was an fatal error in my application. My code uses a try-catch around the Application.Run(masterForm); and hooks into the CurrentDomain.UnhandledException event, but the application still crashes. Even when i attach the debugger, visual studio just tells me "The remote connection to the device has been lost" when the exception occurs.. Since I didn't succeed to catch the exception in the managed environment, I tried to make sense out of the Error Reporter log file. But this doesn't make any sense, the only consistent this about the error is the application where it occurs in. The thread where the application occurs in is unknown to me, the module where the error occurs differs from time to time (I've seen my application.exe, WS2.dll, netcfagl3_5.dll and mscoree3_5.dll), even the error code is not always the same. (most of the time it's 0xC0000005, but i've also seen an 0X80000002 error, which is a warning accounting the first byte?) I tried debugging through bugtrap, but strangely enough this crashes with the same error code (0xC0000005). I tried to open the kdmp file with visual studio, but i can't seem to make any sense out of this because it only shows me disassembler code when i step into the error (unless i have the right .pbb files, which i don't). Same goes for WinDbg. To make a long story short: I frankly don't have a single clue where to look for this error, and I'm hoping some bright soul on stackoverflow does. I'm happy to provide some code but at this moment I don't know which piece to provide.. Any help is greatly appreciated!

    Read the article

  • Semantic Grid System, Media Query issue

    - by Andy
    I'm using the Semantic Grid System to build a responsive site. However, something isn't quite right with the media queries that should obviously kick in once it hits a particular screen size. I'll reference what i mean with their example on the website : if I view this on my iPhone for example, given that it is supposed to adjust to a single column structure on a mobile device, it still throws out the web version of the page. That is true for both Safari and Chrome on my iPhone. However, if I use the RWD bookmarklet to check it's appearance at different resolutions it appears as expected for the mobile resolution. Also, ironically, if I resize the page in Safari on my desktop it also adjusts accordingly once I get down to the approriate screen size, but not in Firefox. The media query that it uses once it hits 720px is @media screen and (max-width: 720px) { #maincolumn, #sidebar { .column(12); margin-bottom: 1em; } } and I might be wide of the mark here but I think that must be the issue. But given that this is directly from the semantic.gs website I'm not inclined to question their own code. Any idea what the problem might be?

    Read the article

  • CPU friendly infinite loop

    - by Adi
    Writing an infinite loop is simple: while(true){ //add whatever break condition here } But this will trash the CPU performance. This execution thread will take as much as possible from CPU's power. What is the best way to lower the impact on CPU? Adding some Thread.Sleep(n) should do the trick, but setting a high timeout value for Sleep() method may indicate an unresponsive application to the operating system. Let's say I need to perform a task each minute or so in a console app. I need to keep Main() running in an "infinite loop" while a timer will fire the event that will do the job. I would like to keep Main() with the lowest impact on CPU. What methods do you suggest. Sleep() can be ok, but as I already mentioned, this might indicate an unresponsive thread to the operating system. LATER EDIT: I want to explain better what I am looking for: I need a console app not Windows service. Console apps can simulate the Windows services on Windows Mobile 6.x systems with Compact Framework. I need a way to keep the app alive as long as the Windows Mobile device is running. We all know that the console app runs as long as its static Main() function runs, so I need a way to prevent Main() function exit. In special situations (like: updating the app), I need to request the app to stop, so I need to infinitely loop and test for some exit condition. For example, this is why Console.ReadLine() is no use for me. There is no exit condition check. Regarding the above, I still want Main() function as resource friendly as possible. Let asside the fingerprint of the function that checks for the exit condition.

    Read the article

  • Scripts to parse and download iTunes Connect and AppStore data

    - by bradhouse
    I'm looking for recommendations of a script or series of scripts that download and parse iTunes Connect sales data and AppStore comments, ratings and rankings data for a defined app. I'm also aware of solutions like: AppViz appsales-mobile iphone-stats Heartbeat.app I'm sure I'll find a few more with more searching. I can't help but feel there must be a really decent set of open source scripts out there to do this, given how many developers are now writing apps for the AppStore. Would be interested to hear any commercial offerings as well (although my personal preference is for open source, so I can at least see what it is doing with my iTunes Connect login credentials). To be clear, I'm really looking for something that hits all of the areas mentioned: App Store (per store) Comments Ratings Category/store rankings iTunes Connect The contents of the sales reports Analysis/graphs of the data is not necessary (but would be a nice to have I guess). I'm not really looking for something like AppSales Mobile above, I would like the raw data so I can do my own analysis and formatting. So far it looks like AppViz (listed above) is the best out there. Any suggestions on what is good/available or should I just go roll my own?

    Read the article

  • Escaping single quote in PHP when inserting into MySQL

    - by hairdresser-101
    I have a perplexing issue that I can't seem to comprehend... I'm hoping someone here might be able to point me in the right direction... I have two SQL statements: - the first enters information from a form into the database. - the second takes data from the database entered above, sends an email and then logs the details of the transaction The problem is that it a appears that a single quote is triggering a MySQL error on the second entry only!!! The first instance works without issue but the second instance triggers the mysql_error(). Does the data from a form get handled differently from the data captured in a form? Query#1 - This works without issue (and without escaping the single quote) $result = mysql_query("INSERT INTO job_log (order_id, supplier_id, category_id, service_id, qty_ordered, customer_id, user_id, salesperson_ref, booking_ref, booking_name, address, suburb, postcode, state_id, region_id, email, phone, phone2, mobile, delivery_date, stock_taken, special_instructions, cost_price, cost_price_gst, sell_price, sell_price_gst, ext_sell_price, retail_customer, created, modified, log_status_id) VALUES ('$order_id', '$supplier_id', '$category_id', '{$value['id']}', '{$value['qty']}', '$customer_id', '$user_id', '$salesperson_ref', '$booking_ref', '$booking_name', '$address', '$suburb', '$postcode', '$state_id', '$region_id', '$email', '$phone', '$phone2', '$mobile', STR_TO_DATE('$delivery_date', '%d/%m/%Y'), '$stock_taken', '$special_instructions', '$cost_price', '$cost_price_gst', '$sell_price', '$sell_price_gst', '$ext_sell_price', '$retail_customer', '".date('Y-m-d H:i:s', time())."', '".date('Y-m-d H:i:s', time())."', '1')"); Query#2 - This fails when entering a name with a single quote (i.e. O'Brien) $query = mysql_query("INSERT INTO message_log (order_id, timestamp, message_type, email_from, supplier_id, primary_contact, secondary_contact, subject, message_content, status) VALUES ('$order_id', '".date('Y-m-d H:i:s', time())."', '$email', '$from', '$row->supplier_id', '$row->primary_email' ,'$row->secondary_email', '$subject', '$message_content', '1')");

    Read the article

  • Escaping single quote in PHP when inserting into MySQL

    - by hairdresser-101
    PLEASE NOTE: I am reposting as the original was not answered correctly... I AM LOOKING FOR THE WHY - NOT THE SOLUTION - I KNOW THE SOLUTION, WHAT I DON'T UNDERSTAND IS THE WHY! I have a perplexing issue that I can't seem to comprehend... I'm hoping someone here might be able to point me in the right direction... I have two SQL statements: - the first enters information from a form into the database. - the second takes data from the database entered above, sends an email and then logs the details of the transaction The problem is that it a appears that a single quote is triggering a MySQL error on the second entry only!!! The first instance works without issue but the second instance triggers the mysql_error(). Does the data from a form get handled differently from the data captured in a form? Query#1 - This works without issue (and without escaping the single quote) $result = mysql_query("INSERT INTO job_log (order_id, supplier_id, category_id, service_id, qty_ordered, customer_id, user_id, salesperson_ref, booking_ref, booking_name, address, suburb, postcode, state_id, region_id, email, phone, phone2, mobile, delivery_date, stock_taken, special_instructions, cost_price, cost_price_gst, sell_price, sell_price_gst, ext_sell_price, retail_customer, created, modified, log_status_id) VALUES ('$order_id', '$supplier_id', '$category_id', '{$value['id']}', '{$value['qty']}', '$customer_id', '$user_id', '$salesperson_ref', '$booking_ref', '$booking_name', '$address', '$suburb', '$postcode', '$state_id', '$region_id', '$email', '$phone', '$phone2', '$mobile', STR_TO_DATE('$delivery_date', '%d/%m/%Y'), '$stock_taken', '$special_instructions', '$cost_price', '$cost_price_gst', '$sell_price', '$sell_price_gst', '$ext_sell_price', '$retail_customer', '".date('Y-m-d H:i:s', time())."', '".date('Y-m-d H:i:s', time())."', '1')"); Query#2 - This fails when entering a name with a single quote (i.e. O'Brien) $query = mysql_query("INSERT INTO message_log (order_id, timestamp, message_type, email_from, supplier_id, primary_contact, secondary_contact, subject, message_content, status) VALUES ('$order_id', '".date('Y-m-d H:i:s', time())."', '$email', '$from', '$row->supplier_id', '$row->primary_email' ,'$row->secondary_email', '$subject', '$message_content', '1')");

    Read the article

  • J2ME cache issue

    - by kiennt
    I have to write a J2ME app to retrieve images from server and display in mobile phone. I have seen and test that Snaptu have a mechanism to cache image, event with 100 images (both normal size and zoom size). I wonder how they can do that? I though that those guys use rms to save image stream to data. But when i check in working folder of simulater( I use Windows XP and Sun Wireless Toolkit 3.0, the Emulator device i use to run my program is CLDC Device 1 - my working folder is C:\Document And Settings\Administrator\javame-sdk\3.0\work\6\appdb), i see some .db file. When i delete these files, i still can view cache image in my emulator???? I also thought that those guys use heap memory to save image. But it is not correct because when i set limit device memory is 2MB (like some mobile phones), and i load and view 100 images in zoom size, it didn't make OutOfMemory Error? It so weird. Any one can help me? Thanks

    Read the article

  • SqlCe odd results why? -- Same SQL, different results in different apps. Issue with

    - by NitroxDM
    When I run this SQl in my mobile app I get zero rows. select * from inventory WHERE [ITEMNUM] LIKE 'PUMP%' AND [LOCATION] = 'GARAGE' When I run the same SQL in Query Analyzer 3.5 using the same database I get my expected one row. Why the difference? Here is the code I'm using in the mobile app: SqlCeCommand cmd = new SqlCeCommand(Query); cmd.Connection = new SqlCeConnection("Data Source="+filePath+";Persist Security Info=False;"); DataTable tmpTable = new DataTable(); cmd.Connection.Open(); SqlCeDataReader tmpRdr = cmd.ExecuteReader(); if (tmpRdr.Read()) tmpTable.Load(tmpRdr); tmpRdr.Close(); cmd.Connection.Close(); return tmpTable; UPDATE: For the sake of trying I used the code found in one of the answers found here and it works as expected. So my code looks like this: SqlCeConnection conn = new SqlCeConnection("Data Source=" + filePath + ";Persist Security Info=False;"); DataTable tmpTable = new DataTable(); SqlCeDataAdapter AD = new SqlCeDataAdapter(Query, conn); AD.Fill(tmpTable); The issue appears to be with the SqlCeDataReader. Hope this helps someone else out!

    Read the article

  • How To Generate Parameter Set for the Diffie-Hellman Key Agreement Algorithm in Android

    - by sebby_zml
    Hello everyone, I am working on mobile/server security related project. I am now stuck in generating a Diffie-Hellman key agreement part. It works fine in server side program but it is not working in mobile side. Thus, I assume that it is not compactible with Android. I used the following class to get the parameters. It returns a comma-separated string of 3 values. The first number is the prime modulus P. The second number is the base generator G. The third number is bit size of the random exponent L. My question is is there anything wrong with the code or it is not compactible for android?What kind of changes should I do? Your suggestion and guidance would be very much help for me. Thanks a lot in advance. public static String genDhParams() { try { // Create the parameter generator for a 1024-bit DH key pair AlgorithmParameterGenerator paramGen = AlgorithmParameterGenerator.getInstance("DH"); paramGen.init(1024); // Generate the parameters AlgorithmParameters params = paramGen.generateParameters(); DHParameterSpec dhSpec = (DHParameterSpec)params.getParameterSpec(DHParameterSpec.class); // Return the three values in a string return ""+dhSpec.getP()+","+dhSpec.getG()+","+dhSpec.getL(); } catch (NoSuchAlgorithmException e) { } catch (InvalidParameterSpecException e) { } return null; } Regards, Sebby

    Read the article

  • How to run crontab-e?

    - by user1723760
    I am currently reading this documentation here where I want to use CRON. Now it says in the first section that I need to enter in a command: crontab -e. Do I only need to enter this in a simple text editor file and just upload the file into the server? I am using helios.hud.ac.uk so would this be the correct command: * * 25 10 * helios.hud.ac.uk/u00000000/Mobile/inactivatesession.php This will execute this php script below (inactivatesession.php): <?php include('connect.php'); $createDate = mktime(0,0,0,10,25,date("Y")); $selectedDate = date('d-m-Y', ($createDate)); $sql = "UPDATE Session SET Active = ? WHERE DATE_FORMAT(SessionDate,'%Y-%m-%d' ) <= ?"; $update = $mysqli->prepare($sql); $update->bind_param("is", 0, $selectedDate); $update->execute(); ?> The url for this php script is: helios.hud.ac.uk/u00000000/Mobile/inactivatesession.php I havn't used CRON before so just need little help on it. Thanks

    Read the article

  • Card emulation via software NFC

    - by user85030
    After reading a lot of questions, i decided to post this one. I read that stock version of android does not support API's for card emulation. Also, we cannot write custom applications to secure element embedded in nfc controllers due to keys managed by google/samsung. I need to emulate a card (mifare or desfire etc). The option i can see is doing it via software. I have a ACR122U reader and i've tested that NFC P2P mode works fine with the Nexus-S that i have. 1) I came across a site that said that nexus s's NFC controller (pn532) can emulate a mifare 4k card. If this is true, can i write/read apdu commands to this emulated card? (Probably if i use a modded rom like cyanogenmod) 2) Can i write a android application that reads apdu commands sent from the reader and generate appropriate responses (if not fully, then upto some extent only). To do so, i searched that we need to patch nexus s with cynagenmod. Has someone tried emulating card via this method? I see that this is possible since we have products from access control companies offering mobile applications via which one can open doors e.g. http://www.assaabloy.com/en/com/Products/seos-mobile-access/

    Read the article

  • Help using RDA on a Desktop Applicaton?

    - by Joel
    I have a .NET 3.5 Compact Framework project that uses RDA for moving data between its mobile device's local SqlCe database and a remote MSSql-2008 server(it uses RDA Push and Pull). The server machine a virtual directory with sqlcesa35.dll (v3.5.5386.0) setup for RDA. We usually install these cabs on the mobile devices and the RDA process does not have any problems: sqlce.wce5.armv4i.cab sqlce.repl.wce5.armv4i.cab Now I am trying to run this application as a desktop application. RDA Pull (download) has been working well. But the RDA Push (upload) is giving me some problems. This is the exception that I get on the desktop application when I try to use RDA Push: System.Data.SqlServerCe.SqlCeException The Client Agent and Server Agent component versions are incompatible. The compatible versions are: Client Agent versions 3.0 and 3.5 with Server Agent versions 3.5 and Client Agent version 3.5 with Server Agent version 3.5. Re-install the replication components with the matching versions for client and server agents. [ 35,30,Client Agent version = ,Server Agent version = ] I have tried copying the file C:\Program Files\Microsoft SQL Server Compact Edition\v3.5\Desktop\SqlServerCe.dll (v3.5.5692.0) to bin\debug I have also tried copying another version of SqlServerCe.dll (v3.0.5206.0) to bin\debug. But this just gives me a slightly different exception: System.Data.SqlServerCe.SqlCeException [ 35,30 ] Is there a different setup or any different dlls that I need to use? Thanks, -Joel

    Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >