Search Results

Search found 4813 results on 193 pages for 'ram shankar yadav'.

Page 162/193 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Cannot set video resolution above 640x480 after installing Windows XP SP2

  - by waanders

  I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

  Read the article

• Can a pool of memcache daemons be used to share sessions more efficiently?

  - by Tom

  We are moving from a 1 webserver setup to a two webserver setup and I need to start sharing PHP sessions between the two load balanced machines. We already have memcached installed (and started) and so I was pleasantly surprized that I could accomplish sharing sessions between the new servers by changing only 3 lines in the php.ini file (the session.save_handler and session.save_path): I replaced: session.save_handler = files with: session.save_handler = memcache Then on the master webserver I set the session.save_path to point to localhost: session.save_path="tcp://localhost:11211" and on the slave webserver I set the session.save_path to point to the master: session.save_path="tcp://192.168.0.1:11211" Job done, I tested it and it works. But... Obviously using memcache means the sessions are in RAM and will be lost if a machine is rebooted or the memcache daemon crashes - I'm a little concerned by this but I am a bit more worried about the network traffic between the two webservers (especially as we scale up) because whenever someone is load balanced to the slave webserver their sessions will be fetched across the network from the master webserver. I was wondering if I could define two save_paths so the machines look in their own session storage before using the network. For example: Master: session.save_path="tcp://localhost:11211, tcp://192.168.0.2:11211" Slave: session.save_path="tcp://localhost:11211, tcp://192.168.0.1:11211" Would this successfully share sessions across the servers AND help performance? i.e save network traffic 50% of the time. Or is this technique only for failovers (e.g. when one memcache daemon is unreachable)? Note: I'm not really asking specifically about memcache replication - more about whether the PHP memcache client can peak inside each memcache daemon in a pool, return a session if it finds one and only create a new session if it doesn't find one in all the stores. As I'm writing this I'm thinking I'm asking a bit much from PHP, lol... Assume: no sticky-sessions, round-robin load balancing, LAMP servers.

  Read the article

• What am I doing wrong in my config for MySql?

  - by Knight Hawk3

  When I load my my.conf with the config at the bottom Mysql fails to start and prints no errors. I am running Arch Linux (Updated) with the latest MySQL (5.5) and the latest nginx (Well latest in the repository, Not sure how to check. Only installed it today) I will give you any info you ask for. Thanks for helping! # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/run/mysqld/mysqld.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/run/mysqld/mysqld.sock skip-locking key_buffer = 16K max_allowed_packet = 1M table_cache = 4 sort_buffer_size = 64K read_buffer_size = 256K read_rnd_buffer_size = 256K net_buffer_length = 2K thread_stack = 64K # Don’t listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (using the “enable-named-pipe” option) will render mysqld useless! # #skip-networking server-id = 1 # Uncomment the following if you want to log updates #log-bin=mysql-bin # Uncomment the following if you are NOT using BDB tables skip-bdb # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = /var/lib/mysql/ #innodb_data_file_path = ibdata1:10M:autoextend #innodb_log_group_home_dir = /var/lib/mysql/ #innodb_log_arch_dir = /var/lib/mysql/ # You can set .._buffer_pool_size up to 50 – 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 16M #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 5M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 skip-innodb [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 1M sort_buffer_size = 1M [myisamchk] key_buffer = 1M sort_buffer_size = 1M [mysqlhotcopy] interactive-timeout So what is my silly error?

  Read the article

• Using my old PC as a web/file server?

  - by Garrett

  I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

  Read the article

• bootmgr image is corrupt

  - by bacord

  I just replaced my HD with a SSD. I did a brand new install on the SSD and I received the following error after booting BOOTMGR image is corrupt. The system cannot boot. A little configuration for your knowledge. The system used to be a dual boot with XP & windows 7. After replacing the original startup HD with my SSD I changed a setting in the bios to AHCI (I have tested changing it back but this did not help). When I look at the stats on the drive in the bios, it claims that the SSD is in a raid configuration despite the settings not being configured that way. Related System Information: Intel 320 Series 80 GB Sata II SSD JetWay JPA78VM3-H-LF AM2+/AM2 AMD 780V HDMI Micro ATX AMD Motherboard AMD Athlon 64 X2 7 GB ram I have performed 2 fresh installs to no avail. Also, followed this guide and performed option 1 and 2. I have done bootsec/fixmbr and /fixboot. So.. any suggestions?

  Read the article

• Can't get intel atom g-500 video driver to work with ubuntu 10.10 netbook edition.

  - by Matthew

  First of all I am completely new to Linux, so if you respond, please do so in a 'linux for dummies' tone so that my brain will be able to process it. I recently installed ubuntu on my dell mini-inspiron 1010. It has one GB of ram and an intel atom processor that uses the intel 500 graphic accelerator driver for windows and can run 1024x768 comfortably in xp. When I was installing ubuntu had quite a bit of trouble with my display and I am still unable to adjust my settings from 800x600x0x0 and there is no hardware acceleration. I visited the intel site and installed the linux drivers with the help of a friend but still no change. I tried adding resolution settings through xconf but they could not be applied even after I added the values. I am probably going about this totally wrong, but I've spent quite a lot of time browsing through forums and still haven't found a solution. Any help would be greatly appreciated. Also any other beginner tips that you have would be much appreciated. Thanks in advance, Matt

  Read the article

• How to set up RAID-0 first time on new PC?

  - by jasondavis

  I have built basic PC's in the past but have never used a RAID array at all. SO now I am buying parts to build my new PC, it will be an intel i7 processor. My motherboard will have RAID support which I will use instead of an aftermarket raid controller for now. Also I plan to use 2 SSD drives in RAID-0 for my windows 7 OS. (Please note that I am aware of the issues with doing this, including lack of TRIM support when using RAID with SSD drives. I am OK with it not working as I can just re[place the drives in a year or so or wheneer they become more sluggish). SO here is my question part. If I assemble the motherboard, PSU, processor, RAM, vidm card, etc and then go to turn the PC on, it will have the 2 SSD drives hooked up. so I assume I will then soon the BIOS screen before I install windows? How to I go about making the 2 drives work in RAID-0 at this point? I do the raid part before installing my OS right? Please help with the steps involved from assembling the parts of the PC and then turning it on, to the part of getting the RAID-0 set up between the 2 drives and then installing my windows 7 OS from a Optical drive? Please help, all advice, instructions, tips appreciated as long as on topic. I do not need to be told that this is a bad idea as far as if 1 drive fails I losse it all, I plan on having a disk IMAGE to be able to restore my OS and software to a new set of drives at anytime needed in the event of drive failure. Same goes for lack of TRIM support. Thanks for reading and help =)

  Read the article

• Windows: How to make programs think they're not running in a terminal server session?

  - by sinni800

  I am using the program "SoftXPand 2011 Duo" by Miniframe on my Windows 7 PC. It makes two workstations out of one computer. It uses the terminal services built into Windows to create the additional session. I use two screens, two keyboards and two mice to create this "illusion" of two computers. It works quite well and I can even play two different 3D games on the two screens attached to this single machine (using a Radeon HD5770 and a Core i5 2500k with 8 Gbytes RAM). There are a few downsides to this. I just found about one that is hidden on the first look. The sessions you are in (even on the first workstation) will identify as a terminal server session! Now some programs will run with limited effects (graphical), and some won't run at all. This also resulted in some games not running at all. They just say "Cannot be run in a terminal server session" and exit. I have already proven that top modern games (DirectX 10, 11) run just as good as on the same machine without SoftXPand, so this is a pretty artificial limitation! So, can I somehow hack my current session so it doesn't look like a terminal server session anymore? I. E. #include <windows.h> #pragma comment(lib, "user32.lib") BOOL IsRemoteSession(void) { return GetSystemMetrics( SM_REMOTESESSION ); } Will return FALSE? (Not a programming question! Just an example how programs detect if they're in a terminal server session!)

  Read the article

• When machine is turned on, only the fan runs

  - by Gopal

  Hi, I have an issue slightly similar to this one posted here, http://superuser.com/questions/127016/troubleshooting-monitor-never-turns-on-system-fans-running-dvd-rom-does-not-op My configuration is as follows: EPOX 9NPA+ Ultra motherboard AMD Athlon 64 CPU Corsair 2 x 1GB PC3200 DDR RAM 1 DVD RW drive and 1 CD ROM Drive SATA 250 GB Hard drive 400W Power supply EVGA 256MB graphics card I have had this configuration for about four years. Last month, I started having issues in starting the machine. It wouldn't start when I press the ON button in the front of the case. So I used to pull out the power cord and plug it back in and then switch on in the front, and it used to work fine. And then one fine day, when I plugged in the power cord at the back, even without switching on the power-on button at the front, I saw that the fan at the back was running. So I opened the system. Then I could see that all the fans inside were running. I replaced the power supply. No luck there. Then I replaced the CMOS battery. Again nothing improved. Even when I removed all the cards and memory, I still get one short beep. That's it. Any idea how to proceed on this? Anything else could be checked? I want to confirm if this is a motherboard failure, before proceeding to replace it.

  Read the article

• Build suggestion for mini itx server [on hold]

  - by Spyros

  I am looking to create a home server and since there does not seem to be a nice ready made one to purchase, i thought of building a mini itx one. I am not familiar with the best hardware/case to pick and therefore i thought i would ask for your experience. I will most probably install a simple linux distro, probably Debian and most probably without a desktop environment as well. Therefore, I am not looking for the best graphics card, though a decent one is preferred for sure. I would say that the most important thing is that the case/hardware play well with each other and the machine has decent specs ( i think something like 8gb RAM and 1TB hdd is most probably my most important things). I understand that this question can be closed as subjective, but it would be a great help for me if some of you guys who have been doing a similar build, can suggest something. I tried to find a stack exchange variant for the question, but it seems that this one more closely relates to the subject. But I will definitely understand it if people close it due to being subjective in nature. If you can maybe move it somewhere or so, please feel free to do so. Thank you for your time :)

  Read the article

• split virtualization design based on environment or server role?

  - by Dan

  I'm setting up the server environment for a new software development group, which will include 4 test environments. These are web applications, so each environment will have an application server and a database server. I'm planning on buying two physical servers (e.g. 6-core CPU each with 12GB or so of RAM), and I'm thinking virtualization is appropriate here. With that in mind, I've thought of a couple ways that I could organize the virtualization strategy: - Separated by server role: Server 1 has all the application servers, each in their own guest VM. Server 2 has all the databases. OR - Separated by environment: Server 1 has a VM for two of the environments, with the VM containing both the app server and the database server. Server 2 would also contain two test environments, with the same style (app server and database in same VM). The advantages I see with all the app servers on one server and all the databases on another server is that I could probably be more efficient with the database server (one instance running multiple databases). But the other option seems easier to manage (archives/restorations would be contained in a single VM). Any recommendations? TIA.

  Read the article

• Centos Server/MySQL server problem

  - by Jake

  Hello all, I currently run a website we get about 15,000-20,000 hits a day. We currently run a very active forum, that is hosted using Vbulletin software. We have 4.5 Million Posts, 80,000 Threads, with about 11,000 members of which just under a third is active all the time. Now I am running a Intel Xeon Quad Core (2.13Ghz) with 4GB of RAM, Centos 5.5 and running DirectAdmin on the box to manage it. I also run the current stable version of Apache, MySQL, and php. This is the only site that is hosted on this machine. Now during random times of day sometimes when it gets busy the server load can get to like 20, but this can also happen when we only have like 200 users active too. I dont understand what is causing these problems. Sometimes I get pages that can generate in .2 seconds other times it takes like 5-8 seconds. I have customized the my.cnf file and that has not helped out anything, I didnt know where else to turn so if anyone has any suggestions please let me know. Thank You In advance.

  Read the article

• Windows 7 restarts while being idle

  - by Ondrej Slinták

  My Windows 7 almost always restarts when I keep it idle for ~20-30mins. It happened randomly before, but lately, if I leave the computer I can be sure it's gonna restart after those 30mins. It never happens when I play games or work tho, just when it's idle. It's a fresh install of Windows 7 64bit. I had also problems while installing it, it always crashed while finalizing the install and I had to reinstall again. Eventually it installed on 3rd or 4th try after I deleted all of my partitions and added them again. I thought it might have been a hardware problem, but temperatures seem to be okay and I have no idea how to track what might have been causing it. Any ideas? I'm running Windows 7 64bit on: Gigabyte EX58-UD4P Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz NVIDIA GeForce GTX 260 6GB of DDR3 1066Mhz RAM WDC WD1001FALS-00J7B0 1TB SATA II I have a very bad feeling it might be something with HDD and its compatibility with Windows 7 as I haven't had those problems for 1 year while I had Vista. Edit: I checked Event Viewer critical errors from this night. PC restarted first time at 11:12pm, then at 3:06am and since then every ~20min until I came back to it. Error message is: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Source: Kernel-Power

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Is this way of using Excel 2007 Pivot table for BI scalable ?

  - by Sim

  Hi all, Background: We need to consolidate sales data across the country to do analysis Our Internet connection/IT expertise/IT investment is not quite strong, therefore full BI solution is out of question I tried several SaaS BI solution (GoodData, ZohoReports) and while they're good, they seem not to fully support what we need We're looking at 'bout 2 millions record for every 2 months My current approach Our (10) sites currently gathers data from all their branches and consolidate them into 1 Excel file with Pivot table and embed source data In HQ, I will request 10 sites to send back those Excel files periodically We will import those Excel to our MSSQL server There will be a master Excel file, that will also have the same pivot table (as those came from site Excel file), and datasource is the MSSQL server More details For testing, I currently use MSSQL 2008 Express on my laptop So far, I imported our transactions for the past 2 months and there are 2 millions+ row in 1 table in MSSQL (we just use 1 table, corresponding to our common pivot table structure). DB size is ~ 600 MB In the master Excel file, if not including the source data, it's just < 10MB. Including the source data will increase the size to 60 MB (so I supposed Office 2007 automatically zip the data ?) I try using the Pivot (drag-and-drop fields) and the performance so far is OK (my laptop specs: C2D T7200, 3GB RAM, Windows XP) So my question is : If we're looking at full year transaction (roughly 15 millions rows in MSSQL 2008 Express, 3.6 GB in size), is there any issue with that 15 million rows in 1 table in SQL Express ? Is there any performance issue with the pivot table at that time ? Can it still embed the source data ? (I google-ed but didn't find the maximum size of source data Excel 2007 can embed) Any other suggestions on how we can better do this ? Given that we can't afford the full BI solution, any light-weight/budget/SaaS BI that you can recommend ? Thanks

  Read the article

• Vista won't boot. BSOD: Page fault in nonpaged area

  - by user31576

  Here's the story: I let Windows Update do the updates it wanted to do, then rebooted the computer. The updating process was taking time so I went away. When I came back, my computer was rebooting. It got as far as the Windows logo with the laoding bar. BSOD'd. Rebooted. And I'm stuck in this loop ever since. Looked up on the net, the "Page fault in nonpaged area" seems to be linked to faulty RAM or drivers. So I ran a memory test, it found no error. When I try in safe mode (with promt) I can see a list of drivers being loaded, then I get the same BSOD. I tried to repair using the Vista DVD, it says "nothing to repair". I tried to restore to a previous state, it says "no restore point found". So, my guess is, it's got something to do with the drivers. How can I identify the one causing the BSOD? If you have any other leads, What can I do? By the way, I'm writing from this very computer, running a linux distro I installed after the BSOD loop started. So i guess it's not an hardware issue. I have backed up important data, and will format and reinstall Windows if I must. But I'd like to avoid that. Thanks in advance for any help you can give me.

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• SQL Server replication and load balance

  - by Ahmed Galal

  I'm running a web service that serves a mobile app on IIS 8 and SQL Server 2014, my service has a massive load and i'm trying to improve performance, most of the load is happening on SQL. i don't think i have a bottleneck, my processor and ram is up to the max and i think my code is not that bad, am already using memcached and other stuff to avoid hitting SQL too much. i know i can always upgrade the server hardware but i already have a spare server that i would like to use, so i was thinking to split the SQL load on the 2 servers. What i was thinking of is to setup replication on the other server and do some load balancing, but am not sure how to do the load balance. I know i can adjust my code to hit the other server for some queries but i was hoping to find a solution that avoid changing my code. So my question is, What are the ways of doing load balancing between 2 SQL servers ? I would appreciate suggestions or best practices or some directions. Thanks.

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• what determines the bios you can use

  - by andy

  I have a Compaq sr5710f with a MCP61PM-HM (Iris8) motherboard and loaded a Geforce6100sm-m bios on to it. It works fine and opened up some options, but I want to give my comp am3 socket support. So my question is if I go looking for a bios that will do that for me what do I need to pay attention to. Is it only the chip set which is geforce 6150se nforce 405 or are there more things I should be looking at. If anyone thinks they might know a bios that will help me out that would be good to. I am looking for a retail bios though. I do not want to load any of the experimental ones you can find on the net. Also I would need it to support ddr2 800 ram, and would like to keep am2 support to. I know my bios is data that is downloaded onto my motherboard, or for lack of a better word a program. I am currently running a bios that is not for my motherboard, so I know it can be done. What I need is what do I need to pay attention to when looking for compatible bios programs, that is not for my motherboard.

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• Which upgrade path for disk IO bound postgres server?

  - by user41679

  Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

  Read the article

• Slow filesystem access

  - by danneh3826

  I'm trying to diagnose a slow filesystem issue on a server I look after. It's been ongoing for quite some time, and I've run out of ideas as to what I can try. Here's the thick of it. The server itself is a Dell Poweredge T310. It has 4 SAS hard drives in it, configured at RAID5, and is running Citrix XenServer 5.6. The VM is a (relatively) old Debian 5.0.6 installation. It's given 4 cores, and 4Gb's of RAM. It has 3 volumes. A 10Gb volume (ext3) for the system, 980Gb volume (xfs) for data (~94% full), and another 200Gb volume (xfs) for data (~13% full). Now here's the weird thing. Read/write access to the 980Gb volume is really slow. I might get 5Mb/s out of it if I'm lucky. At first I figured it was actually disk access in the system, or at a hypervisor level, but ruled that out entirely as other VMs on the same host are running perfectly fine (a good couple hundred Mb/s disk r/w access). So then I started to target this particular VM. I started thinking it was XFS, but to prove it I wasn't going to attempt to change the filesystem on the 980Gb drive, with years and years of billions of files on there. So I provisioned the 200Gb drive, and did the same read/write test (basically dd), and got a good couple hundred Mb/s r/w access to it. So that ruled out the VM, the hardware, and the filesystem type. There's also a lot of these in /var/log/kern.log; (sorry, this is quite long) Sep 4 10:16:59 uriel kernel: [32571790.564689] httpd: page allocation failure. order:5, mode:0x4020 Sep 4 10:16:59 uriel kernel: [32571790.564693] Pid: 7318, comm: httpd Not tainted 2.6.32-4-686-bigmem #1 Sep 4 10:16:59 uriel kernel: [32571790.564696] Call Trace: Sep 4 10:16:59 uriel kernel: [32571790.564705] [<c1092a4d>] ? __alloc_pages_nodemask+0x476/0x4e0 Sep 4 10:16:59 uriel kernel: [32571790.564711] [<c1092ac3>] ? __get_free_pages+0xc/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564716] [<c10b632e>] ? __kmalloc+0x30/0x128 Sep 4 10:16:59 uriel kernel: [32571790.564722] [<c11dd774>] ? pskb_expand_head+0x4f/0x157 Sep 4 10:16:59 uriel kernel: [32571790.564727] [<c11ddbbf>] ? __pskb_pull_tail+0x41/0x1fb Sep 4 10:16:59 uriel kernel: [32571790.564732] [<c11e4882>] ? dev_queue_xmit+0xe4/0x38e Sep 4 10:16:59 uriel kernel: [32571790.564738] [<c1205902>] ? ip_finish_output+0x0/0x5c Sep 4 10:16:59 uriel kernel: [32571790.564742] [<c12058c7>] ? ip_finish_output2+0x187/0x1c2 Sep 4 10:16:59 uriel kernel: [32571790.564747] [<c1204dc8>] ? ip_local_out+0x15/0x17 Sep 4 10:16:59 uriel kernel: [32571790.564751] [<c12055a9>] ? ip_queue_xmit+0x31e/0x379 Sep 4 10:16:59 uriel kernel: [32571790.564758] [<c1279a90>] ? _spin_lock_bh+0x8/0x1e Sep 4 10:16:59 uriel kernel: [32571790.564767] [<eda15a8d>] ? __nf_ct_refresh_acct+0x66/0xa4 [nf_conntrack] Sep 4 10:16:59 uriel kernel: [32571790.564773] [<c103bf42>] ? _local_bh_enable_ip+0x16/0x6e Sep 4 10:16:59 uriel kernel: [32571790.564779] [<c1214593>] ? tcp_transmit_skb+0x595/0x5cc Sep 4 10:16:59 uriel kernel: [32571790.564785] [<c1005c4f>] ? xen_restore_fl_direct_end+0x0/0x1 Sep 4 10:16:59 uriel kernel: [32571790.564791] [<c12165ea>] ? tcp_write_xmit+0x7a3/0x874 Sep 4 10:16:59 uriel kernel: [32571790.564796] [<c121203a>] ? tcp_ack+0x1611/0x1802 Sep 4 10:16:59 uriel kernel: [32571790.564801] [<c10055ec>] ? xen_force_evtchn_callback+0xc/0x10 Sep 4 10:16:59 uriel kernel: [32571790.564806] [<c121392f>] ? tcp_established_options+0x1d/0x8b Sep 4 10:16:59 uriel kernel: [32571790.564811] [<c1213be4>] ? tcp_current_mss+0x38/0x53 Sep 4 10:16:59 uriel kernel: [32571790.564816] [<c1216701>] ? __tcp_push_pending_frames+0x1e/0x50 Sep 4 10:16:59 uriel kernel: [32571790.564821] [<c1212246>] ? tcp_data_snd_check+0x1b/0xd2 Sep 4 10:16:59 uriel kernel: [32571790.564825] [<c1212de3>] ? tcp_rcv_established+0x5d0/0x626 Sep 4 10:16:59 uriel kernel: [32571790.564831] [<c121902c>] ? tcp_v4_do_rcv+0x15f/0x2cf Sep 4 10:16:59 uriel kernel: [32571790.564835] [<c1219561>] ? tcp_v4_rcv+0x3c5/0x5c0 Sep 4 10:16:59 uriel kernel: [32571790.564841] [<c120197e>] ? ip_local_deliver_finish+0x10c/0x18c Sep 4 10:16:59 uriel kernel: [32571790.564846] [<c12015a4>] ? ip_rcv_finish+0x2c4/0x2d8 Sep 4 10:16:59 uriel kernel: [32571790.564852] [<c11e3b71>] ? netif_receive_skb+0x3bb/0x3d6 Sep 4 10:16:59 uriel kernel: [32571790.564864] [<ed823efc>] ? xennet_poll+0x9b8/0xafc [xen_netfront] Sep 4 10:16:59 uriel kernel: [32571790.564869] [<c11e40ee>] ? net_rx_action+0x96/0x194 Sep 4 10:16:59 uriel kernel: [32571790.564874] [<c103bd4c>] ? __do_softirq+0xaa/0x151 Sep 4 10:16:59 uriel kernel: [32571790.564878] [<c103be24>] ? do_softirq+0x31/0x3c Sep 4 10:16:59 uriel kernel: [32571790.564883] [<c103befa>] ? irq_exit+0x26/0x58 Sep 4 10:16:59 uriel kernel: [32571790.564890] [<c118ff9f>] ? xen_evtchn_do_upcall+0x12c/0x13e Sep 4 10:16:59 uriel kernel: [32571790.564896] [<c1008c3f>] ? xen_do_upcall+0x7/0xc Sep 4 10:16:59 uriel kernel: [32571790.564899] Mem-Info: Sep 4 10:16:59 uriel kernel: [32571790.564902] DMA per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564905] CPU 0: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564908] CPU 1: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564911] CPU 2: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564914] CPU 3: hi: 0, btch: 1 usd: 0 Sep 4 10:16:59 uriel kernel: [32571790.564916] Normal per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564919] CPU 0: hi: 186, btch: 31 usd: 175 Sep 4 10:16:59 uriel kernel: [32571790.564922] CPU 1: hi: 186, btch: 31 usd: 165 Sep 4 10:16:59 uriel kernel: [32571790.564925] CPU 2: hi: 186, btch: 31 usd: 30 Sep 4 10:16:59 uriel kernel: [32571790.564928] CPU 3: hi: 186, btch: 31 usd: 140 Sep 4 10:16:59 uriel kernel: [32571790.564931] HighMem per-cpu: Sep 4 10:16:59 uriel kernel: [32571790.564933] CPU 0: hi: 186, btch: 31 usd: 159 Sep 4 10:16:59 uriel kernel: [32571790.564936] CPU 1: hi: 186, btch: 31 usd: 22 Sep 4 10:16:59 uriel kernel: [32571790.564939] CPU 2: hi: 186, btch: 31 usd: 24 Sep 4 10:16:59 uriel kernel: [32571790.564942] CPU 3: hi: 186, btch: 31 usd: 13 Sep 4 10:16:59 uriel kernel: [32571790.564947] active_anon:485974 inactive_anon:121138 isolated_anon:0 Sep 4 10:16:59 uriel kernel: [32571790.564948] active_file:75215 inactive_file:79510 isolated_file:0 Sep 4 10:16:59 uriel kernel: [32571790.564949] unevictable:0 dirty:516 writeback:15 unstable:0 Sep 4 10:16:59 uriel kernel: [32571790.564950] free:230770 slab_reclaimable:36661 slab_unreclaimable:21249 Sep 4 10:16:59 uriel kernel: [32571790.564952] mapped:20016 shmem:29450 pagetables:5600 bounce:0 Sep 4 10:16:59 uriel kernel: [32571790.564958] DMA free:2884kB min:72kB low:88kB high:108kB active_anon:0kB inactive_anon:0kB active_file:5692kB inactive_file:724kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15872kB mlocked:0kB dirty:8kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:5112kB slab_unreclaimable:156kB kernel_stack:56kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564964] lowmem_reserve[]: 0 698 4143 4143 Sep 4 10:16:59 uriel kernel: [32571790.564977] Normal free:143468kB min:3344kB low:4180kB high:5016kB active_anon:56kB inactive_anon:2068kB active_file:131812kB inactive_file:131728kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:715256kB mlocked:0kB dirty:156kB writeback:0kB mapped:308kB shmem:4kB slab_reclaimable:141532kB slab_unreclaimable:84840kB kernel_stack:1928kB pagetables:22400kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.564983] lowmem_reserve[]: 0 0 27559 27559 Sep 4 10:16:59 uriel kernel: [32571790.564995] HighMem free:776728kB min:512kB low:4636kB high:8760kB active_anon:1943840kB inactive_anon:482484kB active_file:163356kB inactive_file:185588kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3527556kB mlocked:0kB dirty:1900kB writeback:60kB mapped:79756kB shmem:117796kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 4 10:16:59 uriel kernel: [32571790.565001] lowmem_reserve[]: 0 0 0 0 Sep 4 10:16:59 uriel kernel: [32571790.565011] DMA: 385*4kB 16*8kB 3*16kB 9*32kB 6*64kB 2*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2900kB Sep 4 10:16:59 uriel kernel: [32571790.565032] Normal: 21505*4kB 6508*8kB 273*16kB 24*32kB 3*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 143412kB Sep 4 10:16:59 uriel kernel: [32571790.565054] HighMem: 949*4kB 8859*8kB 7063*16kB 6186*32kB 4631*64kB 727*128kB 6*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 776604kB Sep 4 10:16:59 uriel kernel: [32571790.565076] 198980 total pagecache pages Sep 4 10:16:59 uriel kernel: [32571790.565079] 14850 pages in swap cache Sep 4 10:16:59 uriel kernel: [32571790.565082] Swap cache stats: add 2556273, delete 2541423, find 82961339/83153719 Sep 4 10:16:59 uriel kernel: [32571790.565085] Free swap = 250592kB Sep 4 10:16:59 uriel kernel: [32571790.565087] Total swap = 385520kB Sep 4 10:16:59 uriel kernel: [32571790.575454] 1073152 pages RAM Sep 4 10:16:59 uriel kernel: [32571790.575458] 888834 pages HighMem Sep 4 10:16:59 uriel kernel: [32571790.575461] 11344 pages reserved Sep 4 10:16:59 uriel kernel: [32571790.575463] 1090481 pages shared Sep 4 10:16:59 uriel kernel: [32571790.575465] 737188 pages non-shared Now, I've no idea what this means. There's plenty of free memory; total used free shared buffers cached Mem: 4247232 3455904 791328 0 5348 736412 -/+ buffers/cache: 2714144 1533088 Swap: 385520 131004 254516 Though now I see the swap is relatively low in size, but would that matter? I've been starting to think about fragmentation, or inode usage on that large partition, but a recent fsck on it showed is as only like 0.5% fragmented. Which leaves me with inode usage, but how much of an effect really would a large inode table or filesystem TOC have? I've love to hear people's opinions on this. It's driving me potty! df -h output; Filesystem Size Used Avail Use% Mounted on /dev/xvda1 9.5G 6.6G 2.4G 74% / tmpfs 2.1G 0 2.1G 0% /lib/init/rw udev 10M 520K 9.5M 6% /dev tmpfs 2.1G 0 2.1G 0% /dev/shm /dev/xvdb 980G 921G 59G 94% /data

  Read the article

• SQLSTATE[HY000]: General error: 2006 MySQL server has gone away

  - by Barkat Ullah

  Server details: RAM: 16GB HDD: 1000GB OS: Linux 2.6.32-220.7.1.el6.x86_64 Processor: 6 Core Please see the link below for my # top preview: I can often see the error mentioned in title in my plesk panel and my /etc/my.cnf configuration are as below: bind-address=127.0.0.1 local-infile=0 datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql max_connections=20000 max_user_connections=20000 key_buffer_size=512M join_buffer_size=4M read_buffer_size=4M read_rnd_buffer_size=512M sort_buffer_size=8M wait_timeout=300 interactive_timeout=300 connect_timeout=300 tmp_table_size=8M thread_concurrency=12 concurrent_insert=2 query_cache_limit=64M query_cache_size=128M query_cache_type=2 transaction_alloc_block_size=8192 max_allowed_packet=512M [mysqldump] quick max_allowed_packet=512M [myisamchk] key_buffer_size=128M sort_buffer_size=128M read_buffer_size=32M write_buffer_size=32M [mysqlhotcopy] interactive-timeout [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid open_files_limit=8192 As my server httpd conf is set to /etc/httpd/conf.d/swtune.conf and the configuration is as below: at prefork.c: <IfModule prefork.c> StartServers 8 MinSpareServers 10 MaxSpareServers 20 ServerLimit 1536 MaxClients 1536 MaxRequestsPerChild 4000 </IfModule> If I run grep -i maxclient /var/log/httpd/error_log then I can see everyday this error: [root@u16170254 ~]# grep -i maxclient /var/log/httpd/error_log [Sun Apr 15 07:26:03 2012] [error] server reached MaxClients setting, consider raising the MaxClients setting [Mon Apr 16 06:09:22 2012] [error] server reached MaxClients setting, consider raising the MaxClients setting I tried to explain everything that I changed to keep my server okay, but maximum time my server is down. Please help me which parameter can I change to keep my server okay and my sites can load fast. It is taking too much time to load my sites.

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >