Search Results

Search found 14709 results on 589 pages for 'root permission'.

Page 162/589 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Ubuntu turns off instead of suspend / sleeping

  - by Marcos

  I'm using Ubuntu 11.10 on my notebook as the main OS. How ever, I've been facing a serious problem: Every time I try to suspend it, or it just stays idle for a while, the computer shuts down, instead of suspending. It actually seems to be suspended, but when I press the button the awake it, it turns on, the open works are all lost. How can i fix this? P.s: On windows 7 the suspend / sleep resumes just fine. Here is a complete list of hardware: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) 00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) 01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 02:00.0 System peripheral [0880]: JMicron Technology Corp. SD/MMC Host Controller [197b:2382] (rev 80) 02:00.2 SD Host controller [0805]: JMicron Technology Corp. Standard SD Host Controller [197b:2381] (rev 80) 02:00.3 System peripheral [0880]: JMicron Technology Corp. MS Host Controller [197b:2383] (rev 80) 02:00.5 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 03) I've updated the kernel to 3.2 still and hibernate or suspend is still not working. SWAP is 1/4 of my RAM.

  Read the article

• FBX SDK Not Converting Child Node Coordinate Systems

  - by Al Bundy

  I am trying to import a scene into my application from an fbx file. In 3DS Max, the scene and it’s local translations are as follows: Root (0, 0, 0) '-Sphere001 (-15, 30, 0) ' '-Sphere002 (-2, -30, 0) ' '-Sphere003 (-30, -20, 0) '-Cube001 (35, -15, 0) This is the code that I am using to get the translations of each node: FbxDouble3 fbxPosition = pChild->LclTranslation.Get(); FbxDouble3 fbxRotation = pChild->LclRotation.Get(); FbxDouble3 fbxScale = pChild->LclScaling.Get(); When I try to import the scene, the first node from the scene is getting converted to a right handed system, using this conversion: (X, Z, -Y), but none of their child nodes are. after importing the scene, the local translations I get are as follows: Root (0, 0, 0) --Sphere001 (-15, 0, -30) - converted ----Sphere002 (-2, -30, 0) - not converted ------Sphere003 (-30, -20, 0) - not converted --Cube001 (35, 0, 15) - converted Can anybody help me make sense of this? Thanks

  Read the article

• Online Password Security Tactics

  - by BuckWoody

  Recently two more large databases were attacked and compromised, one at the popular Gawker Media sites and the other at McDonald’s. Every time this kind of thing happens (which is FAR too often) it should remind the technical professional to ensure that they secure their systems correctly. If you write software that stores passwords, it should be heavily encrypted, and not human-readable in any storage. I advocate a different store for the login and password, so that if one is compromised, the other is not. I also advocate that you set a bit flag when a user changes their password, and send out a reminder to change passwords if that bit isn’t changed every three or six months.    But this post is about the *other* side – what to do to secure your own passwords, especially those you use online, either in a cloud service or at a provider. While you’re not in control of these breaches, there are some things you can do to help protect yourself. Most of these are obvious, but they contain a few little twists that make the process easier.   Use Complex Passwords This is easily stated, and probably one of the most un-heeded piece of advice. There are three main concepts here: ·         Don’t use a dictionary-based word ·         Use mixed case ·         Use punctuation, special characters and so on   So this: password Isn’t nearly as safe as this: P@ssw03d   Of course, this only helps if the site that stores your password encrypts it. Gawker does, so theoretically if you had the second password you’re in better shape, at least, than the first. Dictionary words are quickly broken, regardless of the encryption, so the more unusual characters you use, and the farther away from the dictionary words you get, the better.   Of course, this doesn’t help, not even a little, if the site stores the passwords in clear text, or the key to their encryption is broken. In that case…   Use a Different Password at Every Site What? I have hundreds of sites! Are you kidding me? Nope – I’m not. If you use the same password at every site, when a site gets attacked, the attacker will store your name and password value for attacks at other sites. So the only safe thing to do is to use different names or passwords (or both) at each site. Of course, most sites use your e-mail as a username, so you’re kind of hosed there. So even though you have hundreds of sites you visit, you need to have at least a different password at each site.   But it’s easier than you think – if you use an algorithm.   What I’m describing is to pick a “root” password, and then modify that based on the site or purpose. That way, if the site is compromised, you can still use that root password for the other sites.   Let’s take that second password: P@ssw03d   And now you can append, prepend or intersperse that password with other characters to make it unique to the site. That way you can easily remember the root password, but make it unique to the site. For instance, perhaps you read a lot of information on Gawker – how about these:   P@ssw03dRead ReadP@ssw03d PR@esasdw03d   If you have lots of sites, tracking even this can be difficult, so I recommend you use password software such as Password Safe or some other tool to have a secure database of your passwords at each site. DO NOT store this on the web. DO NOT use an Office document (Microsoft or otherwise) that is “encrypted” – the encryption office automation packages use is very trivial, and easily broken. A quick web search for tools to do that should show you how bad a choice this is.   Change Your Password on a Schedule I know. It’s a real pain. And it doesn’t seem worth it…until your account gets hacked. A quick note here – whenever a site gets hacked (and I find out about it) I change the password at that site immediately (or quit doing business with them) and then change the root password on every site, as quickly as I can.   If you follow the tip above, it’s not as hard. Just add another number, year, month, day, something like that into the mix. It’s not unlike making a Primary Key in an RDBMS.   P@ssw03dRead10242010   Change the site, and then update your password database. I do this about once a month, on the first or last day, during staff meetings. (J)   If you have other tips, post them here. We can all learn from each other on this.

  Read the article

• Can't Log in to Lubuntu 12.04 X Server

  - by isomorphismes

  As of rebooting yesterday I can't login as myself to the X server part of 64-bit Lubuntu 12.04. Same problem as Can not get passed the login screen but that solution didn't work for me. Troubleshooting steps I already took: I can log in as guest (with whatever window manager) to the graphic (X) view of Lubuntu. log in as myself into a virtual terminal. (In fact I'm writing this from w3m for that reason.) So I know my password is correct and that most aspects of the system are working. One of the top google results for "can't log into lubuntu" mentioned a disk-full problem on netbooks; I don't have that problem. Let me know if I need to paste any messages or config files to make this question clearer and I'll do so. $ ls -l /home total 12 drwxr-xr-x 99 me me 12288 May 26 14:16 me $ ls -ld /tmp drwxrwxrwt 16 root root 4096 May 26 15:46 /tmp

  Read the article

• Hot to get XChat to trust CA certificate?

  - by Silvio

  I have created an SSL certificate authority including a sub-authority to issue certificates. I have copied the root certificate to /usr/share/ca-certificates/extra and added it to /etc/ca-certificates, then ran dpkg-reconfigure ca-certificates and update-ca-certificates. After it said "Adding debian:.pem done." I am now fairly convinced that Ubuntu knows about my CA. Now I issued a certificate for the ZNC irc bouncer from the subca, installed it onto znc, but XChat will not trust the certificate despite all the above. I also issued a certificate to use with apache2 and that one works fine after adding the root ca to chromium. Does someone know how I can get XChat to trust the certificate?

  Read the article

• Man pages not finding entry

  - by Mike

  So, I'm not sure what is going on with my system (ubuntu 12.04), but my man pages do not seem to be working. I try man gcc and get the following response No manual entry for gcc See 'man 7 undocumented' for help when manual pages are not available. However I see the man entry in /usr/share/man/man1/gcc.1.gz Here is what my /etc/manpath.config file looks like # manpath.config # # This file is used by the man-db package to configure the man and cat paths. # It is also used to provide a manpath for those without one by examining # their PATH environment variable. For details see the manpath(5) man page. # # Lines beginning with `#' are comments and are ignored. Any combination of # tabs or spaces may be used as `whitespace' separators. # # There are three mappings allowed in this file: # -------------------------------------------------------- # MANDATORY_MANPATH manpath_element # MANPATH_MAP path_element manpath_element # MANDB_MAP global_manpath [relative_catpath] #--------------------------------------------------------- # every automatically generated MANPATH includes these fields # #MANDATORY_MANPATH /usr/src/pvm3/man # MANDATORY_MANPATH /usr/man MANDATORY_MANPATH /usr/share/man MANDATORY_MANPATH /usr/local/share/man #--------------------------------------------------------- # set up PATH to MANPATH mapping # ie. what man tree holds man pages for what binary directory. # # *PATH* -> *MANPATH* # MANPATH_MAP /bin /usr/share/man MANPATH_MAP /usr/bin /usr/share/man MANPATH_MAP /sbin /usr/share/man MANPATH_MAP /usr/sbin /usr/share/man MANPATH_MAP /usr/local/bin /usr/local/man MANPATH_MAP /usr/local/bin /usr/local/share/man MANPATH_MAP /usr/local/sbin /usr/local/man MANPATH_MAP /usr/local/sbin /usr/local/share/man MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man MANPATH_MAP /usr/bin/X11 /usr/X11R6/man MANPATH_MAP /usr/games /usr/share/man MANPATH_MAP /opt/bin /opt/man MANPATH_MAP /opt/sbin /opt/man #--------------------------------------------------------- # For a manpath element to be treated as a system manpath (as most of those # above should normally be), it must be mentioned below. Each line may have # an optional extra string indicating the catpath associated with the # manpath. If no catpath string is used, the catpath will default to the # given manpath. # # You *must* provide all system manpaths, including manpaths for alternate # operating systems, locale specific manpaths, and combinations of both, if # they exist, otherwise the permissions of the user running man/mandb will # be used to manipulate the manual pages. Also, mandb will not initialise # the database cache for any manpaths not mentioned below unless explicitly # requested to do so. # # In a per-user configuration file, this directive only controls the # location of catpaths and the creation of database caches; it has no effect # on privileges. # # Any manpaths that are subdirectories of other manpaths must be mentioned # *before* the containing manpath. E.g. /usr/man/preformat must be listed # before /usr/man. # # *MANPATH* -> *CATPATH* # MANDB_MAP /usr/man /var/cache/man/fsstnd MANDB_MAP /usr/share/man /var/cache/man MANDB_MAP /usr/local/man /var/cache/man/oldlocal MANDB_MAP /usr/local/share/man /var/cache/man/local MANDB_MAP /usr/X11R6/man /var/cache/man/X11R6 MANDB_MAP /opt/man /var/cache/man/opt # #--------------------------------------------------------- # Program definitions. These are commented out by default as the value # of the definition is already the default. To change: uncomment a # definition and modify it. # #DEFINE pager pager -s #DEFINE cat cat #DEFINE tr tr '\255\267\264\327' '\055\157\047\170' #DEFINE grep grep #DEFINE troff groff -mandoc #DEFINE nroff nroff -mandoc #DEFINE eqn eqn #DEFINE neqn neqn #DEFINE tbl tbl #DEFINE col col #DEFINE vgrind vgrind #DEFINE refer refer #DEFINE grap grap #DEFINE pic pic -S # #DEFINE compressor gzip -c7 #--------------------------------------------------------- # Misc definitions: same as program definitions above. # #DEFINE whatis_grep_flags -i #DEFINE apropos_grep_flags -iEw #DEFINE apropos_regex_grep_flags -iE #--------------------------------------------------------- # Section names. Manual sections will be searched in the order listed here; # the default is 1, n, l, 8, 3, 0, 2, 5, 4, 9, 6, 7. Multiple SECTION # directives may be given for clarity, and will be concatenated together in # the expected way. # If a particular extension is not in this list (say, 1mh), it will be # displayed with the rest of the section it belongs to. The effect of this # is that you only need to explicitly list extensions if you want to force a # particular order. Sections with extensions should usually be adjacent to # their main section (e.g. "1 1mh 8 ..."). # SECTION 1 n l 8 3 2 3posix 3pm 3perl 5 4 9 6 7 # #--------------------------------------------------------- # Range of terminal widths permitted when displaying cat pages. If the # terminal falls outside this range, cat pages will not be created (if # missing) or displayed. # #MINCATWIDTH 80 #MAXCATWIDTH 80 # # If CATWIDTH is set to a non-zero number, cat pages will always be # formatted for a terminal of the given width, regardless of the width of # the terminal actually being used. This should generally be within the # range set by MINCATWIDTH and MAXCATWIDTH. # #CATWIDTH 0 # #--------------------------------------------------------- # Flags. # NOCACHE keeps man from creating cat pages. #NOCACHE Thanks for any help (p.s. even 'man man' fails) Edit: When I run ls -l /usr/share/man/man1/gcc* I get the following output lrwxrwxrwx 1 root root 12 May 27 15:41 /usr/share/man/man1/gcc.1.gz -> gcc-4.6.1.gz -rw-r--r-- 1 root root 217776 Apr 15 17:34 /usr/share/man/man1/gcc-4.6.1.gz

  Read the article

• Easy Scaling in XAML (WPF)

  - by Robert May

  Ran into a problem that needed solving that was kind of fun.  I’m not a XAML guru, and I’m sure there are better solutions, but I thought I’d share mine. The problem was this:  Our designer had, appropriately, designed the system for a 1920 x 1080 screen resolution.  This is for a full screen, touch screen device (think Kiosk), which has that resolution, but we also wanted to demo the device on a tablet (currently using the AWESOME Samsung tablet given out at Microsoft Build).  When you’d run it on that tablet, things were ugly because it was at a lower resolution than the target device. Enter scaling.  I did some research and found out that I probably just need to monkey with the LayoutTransform of some grid somewhere.  This project is using MVVM and has a navigation container that we built that lives on a single root view.  User controls are then loaded into that view as navigation occurs. In the parent grid of the root view, I added the following XAML: <Grid.LayoutTransform> <ScaleTransform ScaleX="{Binding ScaleWidth}" ScaleY="{Binding ScaleHeight}" /> </Grid.LayoutTransform> And then in the root View Model, I added the following code: /// <summary> /// The required design width /// </summary> private const double RequiredWidth = 1920; /// <summary> /// The required design height /// </summary> private const double RequiredHeight = 1080; /// <summary>Gets the ActualHeight</summary> public double ActualHeight { get { return this.View.ActualHeight; } } /// <summary>Gets the ActualWidth</summary> public double ActualWidth { get { return this.View.ActualWidth; } } /// <summary> /// Gets the scale for the height. /// </summary> public double ScaleHeight { get { return this.ActualHeight / RequiredHeight; } } /// <summary> /// Gets the scale for the width. /// </summary> public double ScaleWidth { get { return this.ActualWidth / RequiredWidth; } } Note that View.ActualWidth and View.ActualHeight are just pointing directly at FrameworkElement.ActualWidth and FrameworkElement.ActualHeight. That’s it.  Just calculate the ratio and bind the scale transform to it. Hopefully you’ll find this useful. Technorati Tags: WPF,XAML

  Read the article

• Adding partitions to dual boot on Windows

  - by Bernard

  I am trying to install Ubuntu 12.04 along side Windows 7 on an HP mini 210 netbook. I have down loaded an iso image OK and got the installation program working but I am having problems with partitioning. I want to keep my Windows installation intact so I am following the 'Other' installation route. I have managed to shrink the main Windows partition down to 50GB leaving 250GB free space but I can't find a way of adding any extra partitions for Ubuntu. The free space gets listed by the installer as 'unusable' but on the graphic at the top its called 'free space'. If I select this and click 'Install Now' I get an error message: 'No root file system is defined'. I have tried clicking the Add, Change Delete and New Partition table buttons with the unusable partition selected and nothing happens. How do I define a root mount point when I do not have any Linux partitions?

  Read the article

• apache domain redirect to subfolder

  - by Dennis

  I have a hosting account with godaddy. Its a linux system running apache. The way they do their setup is your primary domain is the root folder. When you add a subdomain its in a subfolder of the root which sucks. I want to setup a subfolder structure to organize my domains.. I called godday support and they said to use redirects.. but did not know how to do that.. How its setup now: primary domain: www.domain.com / sub.domain.com /sub I want to create a directory structure and then redirect to each but only show www.domain.com in the url www.domain.com /domain/www sub.domain.com /domain/sub I tried using: RewriteEngine On RewriteCond %{HTTP_HOST} ^(www.)?domain.com$ RewriteRule ^(/)?$ domain/www [L] but it just changes the url to www.domain.com/domain/www Can this be done in htaccess?

  Read the article

• Xen 4.0.1 on Ubuntu 10.10 not booting

  - by Disco

  I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

  Read the article

• vb.net and mysql connectivity [closed]

  - by kalpana

  I have used adodb using odbc database connectivity for connecting vb.net to mysql. I have fetched table values into recordset. I want to fetch only one column values (for example, table name-login, column name-password and values in password column are "manage","sales","general"). I want to fetch these values in text boxes. I have written code but it's not working. Dim conn As New ADODB.Connection Dim res As New ADODB.Recordset conn.Open("test", "root", "root") res = conn.Execute("select password from login") textbox1.text=res(0).value textbox2.text=res(1).value textbox3.text=res(2).value I am getting data in textbox1 but other data is not getting inserted into textbox2 and textbox3..I am getting error i.e (1) Item cannot be found in the collection corresponding to the requested name or ordinal.

  Read the article

• Wireless not working with a RaLink RT3090

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? Output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Recover RAID 5 data after created new array instead of re-using

  - by Brigadieren

  Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

  Read the article

• Wireless Not Working on Ubuntu 10.10

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with wireless LAN. It simply doesn't work! Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• Permanent redirect domain to www subdomain without web.config

  - by Lord Simpson

  I've just set up a site via 1and1 and have run into an issue, I want to accomplish the simple task of redirecting the root domain to the www sub domain however due to complications I cant seam to find a way to get it to work. I'm on a Microsoft (asp.net) package so can't use .htaccess, also the IIS server they have doesn't have the URL redirect module installed (so can't use <rewrite> in web.config). They have built in HTTP forwarding options however if I set the root domain to redirect to the www sub domain it just infinitely redirects. Hopefully there is some obvious option/method I've missed during the past two days of searching!

  Read the article

• Video stutter when using external drive

  - by psion

  When using boxee to play video files off of an external western digital 1TB drive formatted NTFS, I notice a slight stutter in the video every 5-10 seconds. When using mplayer, it doesn't stutter as often, but it still stutters occasionally. If I play the video off of the local sata drive, it plays fine even in boxee. I use this computer as my HTPC and I just switched from windows to linux on it. In windows, I never had any sort of stutter playing movies from the drive. I am using the latest intel graphics drivers (for the intel GMA 950) root@eee-htpc:/home/htpc# grep wd /etc/mtab /dev/sdb1 /mnt/wd2 fuseblk rw,nosuid,nodev,allow_other,blksize=512 0 0 I notice that despite trying to use ntfs or ntfs-3g, ubuntu uses ntfs-fuse which I've heard is slower. /dev/sdb1: Timing buffered disk reads: 80 MB in 3.07 seconds = 26.08 MB/sec root@eee-htpc:/mnt/wd2# dd if=/dev/zero of=./120mb bs=1024 count=120000 root@eee-htpc:/mnt/wd2# time mv ./120mb /home/htpc real 0m2.095s user 0m0.016s sys 0m0.736s Even though fuse has a reputation for being slow, it should easily be fast enough for playing standard definition video files. So why the video stutter? edit: The issue seems to be overhead cpu usage from either playing off of a usb device or ntfs/fuse. Watching CPU usage with top, local files use 10-40% CPU. Watching the same video on the external formatted ntfs, it spikes to 170% (over 100% because of hyperthreading). To me it seems like it must be overhead from the fuse driver, though I don't know if it has more or less overhead than ntfs-3g. It's a EEEBox B202 that has an atom 270, so not exactly the most powerful out there. edit2: I believe the solution would be to use non-fuse drivers or different fuse drivers. so far I have not been able to. edit3: I've probably edited this more times than I should, but as an update I have upgraded ntfs drivers to ntfs-3g 2010.8.8 external FUSE 28 - Third Generation NTFS Driver using the following PPA - ppa:x3lectric/team-iquik-releases. When first opening a video file in boxee that's on ntfs there's still the same amount of lag. After a few minutes of video, the lag seems to go away and the cpu usage comes down to 10-40%. Every so often though, it begins to stutter again. Also, if I skip ahead/back in the file, it begins to stutter a lot.

  Read the article

• LAMP Stack Location

  - by Artem Moskalev

  I have installed the LAMP stack on Ubuntu 12.04 LTS using the tasksel command. I checked - it works. But I cant find the location of the installaton, I worked with WAMP - there you have a separate folder for Apache, for PHP and for mysql. Now I cant even find where to put the documents I create. Which folder is used to contain my web projects? How to start MySQL console and where to look for its installation directory? Which directories are PHP and Apache installed in? how to erase LAMP stack? I found out that some of the parts of the stack are installed in the root/var and root/etc directories: How can I install the whole LAMP stack in /home?

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• What is the significance of '*' (star, asterisk) in the file listing results?

  - by vfclists

  I have noticed that some of my files have an asterisk at end. Does the asterisk at the end have any particular significance? I think they are mostly executable and displayed in green by the ls command. You will see that ./bkmp* and ./bkmp0* have an asterisk at the end. They are executable bash scripts. Here's my output: drwxr-xr-x 7 username username 4096 Oct 2 18:28 ./ drwxr-xr-x 8 root root 4096 Oct 2 09:25 ../ -rw-r--r-- 1 username username 3724 Sep 22 03:06 .bashrc -rwxr--r-- 1 username username 319 Sep 22 03:42 .bkmp* -rwxr--r-- 1 username username 324 Sep 29 23:30 .bkmp0* drwx------ 2 username username 4096 Sep 17 13:52 .cache/ -rw-r--r-- 1 username username 675 Sep 17 13:37 .profile drwx------ 2 username username 4096 Sep 22 10:10 .ssh/ drwx------ 2 username username 4096 Sep 24 19:49 .ssh.local/ drwxr-xr-x 2 username username 4096 Sep 22 04:10 archives/ drwxr-xr-x 3 username username 4096 Sep 24 19:51 home/ -rw-r--r-- 1 username username 27511 Sep 24 19:51 username_backup.20120924_1908.tar.gz

  Read the article

• How do I encrypt the source code on the webserver?

  - by Ashin k n

  I have a web application developed using Python, HTML, CSS & JavaScript. The customer installs it in any of their own Machine and uses it through their LAN. In short the customer sets up the webserver in any of their own machine. Since its a web application, all the source code is open for the customer in the document root directory of webserver. I want to encrypt the whole source code in the document root directory in such a way that it should not effect the working of the web application. Is there is any way to encrypt the Python, HTML, CSS & JavaScript for this purpose.

  Read the article

• Can't fix broken packages

  - by AWE

  I am too dumb but determined to use Ubuntu that I paid a professional to install it for me (dualboot 11.10 with Win7). When I came home I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now the computer is mute. Items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev so I do this: sudo apt-get update && sudo apt-get upgrade which tells me to do this: sudo apt-get -f install that ends up like this: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) When fixing broken packages in synaptic package manager I get this: Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install. Trying to recover: dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. I want to become a linux geek but it is harder than I thought. Please help!

  Read the article

• pulseaudio and alsa on ubuntu 12.04 server

  - by Dan

  I am running ubuntu 12.04server, and trying to get pulseaudio working. I followed the instructions at How do I run PulseAudio in a headless server installation? At the moment, pacmd list-cards is reporting 0 cards, aplay will only playing sound when I run it as sudo, and running alsamixer as sudo also works, but running it as my user produces "cannot open mixer: No such file or directory" As far as I can tell, this means the the kernel module for my sound card is in fact loaded. I have already tried adding my user to the "audio" group, but this does not help. The permissions on the devices in /dev/snd are all crw-rw---T 1 root audio 116 I noticed on an ubuntu 12.04 desktop, that the file permissions are slightly different. On the desktop, they are crw-rw---T+ 1 root audio 116 My questions are 1) How do I get aplay to work without running it as sudo on the server 2) Is there anything special I need to do to make pulseaudio work at this point.

  Read the article

• Sendmail not working as desired in bash script

  - by dan08

  This is the code I have in a bash script that runs as a cronjob. The cronjob run as root. /usr/sbin/sendmail [email protected]<<EOF subject:Backup Error! from:backup@server01 $error EOF There is code after this and the email I get is as follows: From the root user on the machine. and the message includes: subject:Backup Error! from:backup@server01 $error EOF More code... that is in the script all the way to the end... I have tried other variations, this is the closest I've got. I tried this in a regular script and it worked properly. Whats going on, and how can I send this email, specifying the subject and form sender?

  Read the article

• How disable mysql command in sudoers file?

  - by Carlos A. Junior

  How i can disable /usr/bin/mysql command in sudoers file ? ... Actually I've tryed use with this way: %tailonly ALL=!/usr/bin/mysql But when i'm access if user 'tailonly' of group 'tailonly', this command still enabled. In resume, i'm only want that 'tailonly' user access 'tail -f /usr/app/*.log' ... This is possible ? Edit: With this config, the user 'tailonly' still can access mysql terminal with 'mysql' command: $: sudo su $: visudo Cmnd_Alias MYSQL = /usr/bin/mysql Cmnd_Alias TAIL=/usr/bin/tail -f /jacad/jacad3/logs/*.log # User privilege specification root ALL=(ALL:ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL %swa ALL=/etc/init.d/jacad3 stop %swa ALL=/etc/init.d/jacad3 start %swa ALL=/etc/init.d/jacad3 restart %swa ALL=sudoedit /jacad/jacad3/bin/jacad_start.sh %tailonly ALL=ALL,!MYSQL

  Read the article

• How do I make Powertop changes permanent?

  - by arno

  I'm on a Compaq 615 and it's fan is loud as hell. Not much you can do about that but I'm trying to keep the CPU/GPU as cool as possible. This is what Powertop has to say: If I change all of them to "good", the changes don't survive a reboot. Also, upon exiting Powertop I get this: Loaded 8 prior measurements Cannot load from file /var/cache/powertop/saved_parameters.powertop Leaving PowerTOP I added the line to the "grub"-file as suggested here Upon closing gedit I get this: (gedit:2728): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Datei »/root/.local/share/recently-used.xbel.9CIMAW« konnte nicht angelegt werden: Datei oder Verzeichnis nicht gefunden The part in German says: Couldn't be created: File or directory not found.

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >