Search Results

Search found 14989 results on 600 pages for 'street address'.

Page 162/600 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169 | Next Page >

Why does my Windows 8 Pro Hyper-V guest have no internet?

- by Perplexed

Trying to get this working on my Windows 8 Pro machine. I created an External Switch Assigned the newly available adapter to a Guest machine with Win 2008 os. My host has internet connection. Host can ping Guest, Guest cannot ping Host. Guest has no internet connection. Pasting the IP of both host and guest. HOST ========================== Ethernet adapter vEthernet (EXTSW01): Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2 Physical Address. . . . . . . . . : 9C-B7-0F-0F-D7-D0 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::5434:a9fd:8611:d207%54(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.15(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, September 8, 2012 12:34:44 PM Lease Expires . . . . . . . . . . : Saturday, September 15, 2012 12:34:44 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 916240141 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DC-C9-2C-9C-B7-0D-0D-D7-D0 DNS Servers . . . . . . . . . . . : 64.71.255.999 NetBIOS over Tcpip. . . . . . . . : Enabled GUEST ========================== Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-3F-0F-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::953f:ec5c:5d84:1b50%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 0.0.0.0 DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-DD-2F-29-0F-15-5E-00-0F-00 DNS Servers . . . . . . . . . . . : ::1 127.0.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled

Read the article
NAT via iptables and virtual interface

- by Alex

I'm trying to implement the following scenario: One VM-host, multiple guest VMs, each one gets its own IP-address (and domain). Our server has only one physical interface, so the intended use is to add virtual interfaces on eth0. To complicate our situation the provider uses port-security on their switches, so I can't run the guest interfaces in bridged mode, because then the switch detects a "spoofed" MAC-address and kills the interface (permanently, forcing me to call the support, which I'm sure will get them a little bit angry the third time ;) ). My first guess was to use iptables and NAT to forward all packages from one virtual interface to another one, but iptables doesn't seem to like virtual interfaces (at least I can't get it to work properly). So my second guess is to use the source IP of the packages to the public interface. Let's assume libvirt creates a virbr0-network with 192.168.100.0/24 and the guest uses 192.168.100.2 as IP-address. This is what I tried to use: iptables -t nat -I PREROUTING --src public_ip_on_eth0:0 -p tcp --dport 80 -j DNAT --to-destination 192.168.100.2:80 That doesn't give me the intended results either (accessing the server times out). Is there a way to do what I'm trying to do, or even to route all traffic to a certain IP on a virtual interface to the VM's device?

Read the article
How do I enable Ubuntu Gnome system tools

- by RussellW

I am running Ubuntu 10 with Gnome 2.30.2. This is a VMWare workstation image provided by another company that I do not have support in this regard. I am trying to access the graphical tools for configuring the network, users, and services but the System-Administration menu does not have these options listed. The main issue I am trying to solve is to correct the problems with the gnome menu options and network settings I have the gnome-system-tools package installed, and I am unable to run command-line versions of the tools, such as nm-applet (I get no GUI if I run that command, the process is running in the background). I realize that I can perform many tasks command-line, but I would like to use the GUI for administrative functions as I am not overly proficient for all command for restarting services and setting a static IP with a specific gateway. Further, I can run gnome-nettool, but I cannot change the IP, I can only see my network card. nm-connection-editor does not show any network cards that I can configure to change the IP. Currently, I am getting a DHCP through my NAT in VMWare, I want to set it to a specific IP address though. Preferences Menu (note some missing options) ![Preferences Menu][1] Admin Menu (note some missing options) ![Admin Menu][2] Network Tools (I can view but not change IP address) ![Network Tools][3] Network Settings (Unable to change IP address) ![Network Settings][4] Network Connections (no connections listed, not even my existing ethernet NAT connection through VMWare) ![Network Connections][5] See images here that I have referenced: 1- http://i.imgur.com/kl8pP.png 2- http://i.imgur.com/K3Cjz.png 3- Iq7Xb.png 4- 7wheV.png 5- J2ad8.png

Read the article
Cloning a git repository from a machine running OS X

- by Mike

Hi folks, I'm trying to host a git repository from my home OS X machine, and I'm stuck on the last step of cloning the repository from a remote system. Here's what I've done so far: On the OS X (10.6.6) machine (heretofore dubbed the "server") I created a new admin user Logged into the new user's account Installed git Created an empty git repository via "git init" Turned on remote login Set port mapping on my router (airport extreme) to send ssh traffic to the server Added a ".ssh" directory to the user's home directory From the remote machine (also an OS X 10.6.6 machine), I sent that machine's public key to the server using scp and the login credentials of the user created in step 1 To test that the server would use the remote machine's public key, I ssh'd to the server using the username of the user created in step 1 and indeed was able to connect successfully without being asked for a password I installed git on the remote machine From the remote machine I attempted to "git clone ssh://[email protected]:myrepo" (where "user", "my.server.address", and "myrepo" are all replaced by the actual username, server address and repo folder name, respectively) However, every time I try the command in step 11, I get asked to confirm the server's RSA fingerprint, then I'm asked for a password, but the password for the user I set up for that machine never works. Any advice on how to make this work would be greatly appreciated!

Read the article
Local Network - Windows 7 and Vista can't see each other

- by ca8msm

I've got a strange issue at home that has been bugging me for weeks, but I really need to get it sorted now so I'll detail as much as I can and hopefully someone can spot what might might be wrong. I have a wireless router connected to the internet and 3 devices connected to it. They are: Name OS Network IPv4 PC1 Windows 7 WORKGROUP 192.168.2.2 LAPTOP1 Vista WORKGROUP 192.168.2.3 PS3 192.168.2.4 and they all get their IP addresses dynamically. Both PC1 and LAPTOP1 can ping PS3 and get a response. PC1 and LAPTOP1 are unable to ping each other by ip address unless I ping by their name (which bizarrely shows that it is pinging via the IPv6 address). Also, to confirm this both PC1 and LAPTOP1 can ping each other via the long IPv6 address that they both have so they can obviously see each other just not via IPv4. I've disabled the firewalls on both machines as well to rule that out. I don't really know what IPv6 is used for and I've tried disabling it on both machines but all that happens then is that neither machine can see each other at all then. Does anyone have any idea of what may be stopping them seeing each other, any ways I can look at fixing this, or any network tools that may help identify where it is failing? Thanks, Mark

Read the article
Office documents on intranet all requiring second login and can't pass auth? Disable webdav?

- by DOTang

I am not sure what is going on, but recently all the Office documents on our intranet get prompted a second time for login and according to the error logs it looks like it's trying to use webdav to open (an editable?) version of the document to save directly on the server? We have no sharepoint server setup or anything, but this shouldn't be happening. All I want is for the document to be saved or opened from a local copy in temp like normal. Here is the log: Line 57499: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57500: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 Line 57501: 2011-04-12 15:57:10 (ip) OPTIONS (address) - 443 (username) (user ip) Microsoft-WebDAV-MiniRedir/6.1.7601 - 401 1 1326 1525 238 0 The log basically contains a bunch of these. How can I disable this behavior so that office documents that are downloaded aren't attempted to be used through webdav?? Edit: I should clarify behavior, it asks if you want to save or open it, upon choosing open open, it asks to re-authenicate, you put in the user information and the login box comes up 3 times acting like you entered the wrong password. For some users, after passing the login box the third time, it still opens up, for others their browser just locks up. It also doesn't even look like webdav is installed on our server, I see no config options in IIS for it as outlined on this page: http://learn.iis.net/page.aspx/350/installing-and-configuring-webdav-on-iis-7/#001

Read the article
If I ssh to a domain provided by dyndns, does my password go through them?

- by D Connors

I'm running Ubuntu on my work PC, and my work place provides me with a static IP address but not with a domain. It's sometimes useful for me to connect to that PC through ssh, but it's not common enough for me to instantly remember the IP number. So I set um a dyndns account, and associated a short and intuitive domain name to that IP. Here's my question, when I try to ssh to the domain, it asks me $ ssh [email protected] The authenticity of host 'something.there.foo (xx.xx.xx.xx)' can't be established. RSA key fingerprint is 'ALPHANUMERIC STRING' Are you sure you want to continue connecting (yes/no)? That surprised me a little bit. I have already registered the RSA fingerprint by connecting directly to the IP address. I thought the domain name was simply a convenient way of pointing me in the right direction (i. e. the ip address), but that message makes me think my data is actually going through their servers or something. Which one is it? Am I sending my password through someone else's server? Or is ssh just really really careful, thus warning me even if the final destination is a know host? The ssh server I'm using is the openssh-server package.

Read the article
A switch and router between the printer and PC that want to print but cannot

- by Robert Memo

IP 192.168.1.5 has a wireless connection to a Linksys router (192.168.1.1) which then is connected to a switch. The switch is connected to a server (192.168.0.2). My printer has IP address of 192.168.0.8. Internet connection is fine on 192.168.1.5. Problem 1: IP 192.168.1.5 can not print using printer 192.168.0.8. Problem 2: IP 192.168.1.2 can not access a shared folder on the the server. The reason for connecting this way is that, the server does not release wireless signal. In order to get wireless signal the Router is connected to the switch. The server is a computer server that only has one outgoing LAN port. Plus, due to inconvinience physical locations, I do not have option to change the physical locations and the way it is connected already. I just want the labtops that only have wireless connection to communicate with the printer and the server. I have tried to change the router IP address to 192.168.0.x like the server and printer. It caused problem for the laptop. The router no longer release internet signals. The router does have IP address from the server 192.168.0.5.

Read the article
How do I connect remotely to SQL Server from Windows client?

- by humble_coder

Hi All, Having a bit of an issue connecting to SQL SERVER remotely from Windows. I've verified that all of my settings are correct via SQL SERVER MANAGEMENT STUDIO EXPRESS and SQL SERVER CONFIGURATION MANAGER. I can connect remotely using ODBC drivers from other OSes (e.g. OS X, Linux, etc). However, when I connect with the same credentials from a remote Windows machine using "SQL SERVER" as the driver I am told that the system cannot connect. I've tried creating an ODBC Data Source and I get the same error: Connection failed: SQLState: '01000' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(InvalidInstance()). Connection failed: SQLState: '08001' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Invalid Connection From the non-windows machines I can use the IP address of the SQL Server just fine. However, on the remote Windows machine, neither IP address nor named instance works. FYI, I can create an ODBC Data Source using the named instance on the machine actually running the SQL Server (but this is, of course, nothing special -- just proof that it isn't completely hosed). One interesting note: If I use SQL STUDIO 2005 from a Windows client machine, I can use the IP address to connect remotely. Still, the whole reason I bring this up is because I need to use a software package I've written to connect to SQL Server remotely from Windows machines as well. Previously the solution was only needed to xfer data from SQL Server into a PostGRES or MySQL database on non-Windows machines (due to DBA preference). However, now they also want to move the data from the legacy software to MySQL even on Windows. Any assistance would be most appreciated. Feel free to provide a full example connection string. Best

Read the article
"Server not found" errors all over after Wordpress installation

- by picardo

I uploaded my Wordpress blog from my local machine to Slicehost and then pointed the domain name to the IP address. Then I installed the blog as normal. Once I went to wp-login.php to login, though, I started getting "Server not found" errors. That was strange because the server process was still running, and I checked many times. I can't see anything wrong in the error log, or the access log either. This doesn't only affect Wordpress. I can't access phpmyadmin either now, which was mapped to a subdirectory of the same domain address. What is going on? Can anyone help? Edit: the blog is located on a subdomain. It's still accessible from IP address. The virtual host configs are ServerName and ServerAlias, both set to blog.mysite.com. When I changed those and restarted apache, phpmyadmin came back. Edit: also it's not a propagation issue because I installed the blog from the domain name. It's only when I tried to log into the admin section, I started getting these errors.

Read the article
Enabling http access on port 80 for centos 6.3 from console

- by Hugo

Have a centos 6.3 box running on Parallels and I'm trying to open port 80 to be accesible from outside tried the gui solution from this post and it works, but I need to get it done from a script. Tried to do this: sudo /sbin/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT sudo /sbin/iptables-save sudo /sbin/service iptables restart This creates exactly the same iptables entries as the GUI tool except it does not work: $ telnet xx.xxx.xx.xx 80 Trying xx.xxx.xx.xx... telnet: connect to address xx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host UPDATE: $ netstat -ntlp (No info could be read for "-p": geteuid()=500 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:37439 0.0.0.0:* LISTEN - tcp 0 0 :::111 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 ::1:631 :::* LISTEN - tcp 0 0 :::60472 :::* LISTEN - $ sudo cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Wed Dec 12 18:04:25 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5:640] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Wed Dec 12 18:04:25 2012

Read the article
Centos VM serving multiple public IP: how to configure network interface?

- by Glasnhost

I have a Centos 5.6 VM (Vsphere client) already responding to two different public IPs on eth0 and eth0:1 and I'm trying to add eth0:2. I copied the eth0 config file and restarted the network service. I don't understand which other steps are needed... ifconfig eth0 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.10 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163371837 errors:77 dropped:0 overruns:0 frame:0 TX packets:168210961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1891221045 (1.7 GiB) TX bytes:855899500 (816.2 MiB) Interrupt:59 Base address:0x2000 eth0:1 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.11 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 eth0:2 Link encap:Ethernet HWaddr 00:40:46:B9:00:41 inet addr:10.1.12.12 Bcast:10.1.12.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:59 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:188976973 errors:0 dropped:0 overruns:0 frame:0 TX packets:188976973 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2015642664 (1.8 GiB) TX bytes:2015642664 (1.8 GiB) more /etc/resolv.conf nameserver 10.1.12.1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.1.12.1 0.0.0.0 UG 0 0 0 eth0

Read the article
Are email addresses mandatory for Windows 8 login names?

- by Cedric Martin

I've got a computer running Windows 8 and in the user accounts I can see four accounts (they're in french, here's a rough translation): [email protected] / administrator Veronique YYY / [email protected] ASP.NET Machine Account / local account guest account / the guest account is desactivated I've got several questions but they're all related to email addresses and login names / accounts. Are email addresses mandatory for Windows 8 login names? Can you mix live and non-live user accounts on a Windows 8 system? Is it possible to have a live Windows 8 user account which is not using a @live.xx email address? Is it possible to have a non-live Windows 8 user account which is using a @live.xx email address? If the gmail.com email address of the admin is not a live Windows 8 account, does this mean I can create a "fake" email and use that as the email of a new Windows 8 account? Basically I don't understand very well why there are email addresses displayed on the login screen and why there are both @live.xx and @gmail.com email addresses on the same system and answer to the questions I asked above may help me understand a bit better what is going on (I'm coming from a Linux / OS X background. I literally haven't used Windows in more than a decade).

Read the article
Is there a learnable filter in Thunderbird for non-spam messages (as in Opera Mail)?

- by Debilski

One feature I like very much about Opera Mail is that you can have learnable filters for any purpose. So not only can you filter spam messages but also messages that your friends sent you or info mails from web platforms without having to enter each and every mail address you want to filter. It actually works quite satisfying and you can combine it with string filtering, too. It does a few mistakes in the beginning but then improves quickly after you have removed some of the false positives. However, there are a couple of drawbacks with the Opera Mail module. The filters are only ‘virtual’. So, with IMAP there is no easy way of mirroring the filtered structure back on the server and when I’m using webmail I’ll see the whole unfiltered mess in the inbox folder. Opera’s not using the OS X address book — and neither does it use ldap (which is not too important for me at the moment). So, I’m not specifically looking for a Thunderbird solution here, a way to fix things in Opera or Apple Mail should do as well. Or some other E-Mail program I don’t even know about yet. (So, to be clear, I’d like to have: OS X Address Book integration, Learnable filters for any type of filtering, Ability to push filtered folder structure to the IMAP server) But I thought like, if it is possible then most probably there would be an add-on for Thunderbird available. Any ideas?

Read the article
openvpn in a bridge?

- by sebelk

I have a somewhat tricky proble to solve. We have a wireless link between 2 building. One of them has an mikrotik and below there are some vlans. Some machines of one vlan need to use openvpn to connect to a remote private lan. I put a TP-Link WR1043ND (which those machines connect to) with openwrt with ebtables just in case I need it. I've configured openwrt in such a way that all ports belongs to the same vlan. My idea was to make things as transparent as I can. It has a bridge as follows: usr/sbin/brctl-full show br-lan bridge name bridge id STP enabled interfaces br-lan 8000.f8d111565716 no eth0.1 eth0.2 Also I've added an ebtables rule: ebtables -t broute -A BROUTING -p ipv4 -j DROP So "bridge" has only one IP address. I've installed openvpn and I'm trying to bring up the tunnel but I can't still get working. Sure, someone can says why don't you use the vpn on the mikrotik, there are some reasons, the first one is I have little experience with mikrotik and I'd want to have the vpn at hand :) The problem is that openvpn is not working, because it is complaining that I have only one Ip Address on the server side. So I set up and alias interface with another IP address but is not working either: : Rejected connection attempt from IP-Client-Side:37801 due to --remote setting Is there a way to make it work?

Read the article
Utilu IE Collection IE6 crashes under Windows 7

- by Aron

I've installed Utilu IE Collection under Windows 7 64-bit, but am unable to successfully run IE6 (specifically, "Internet Explorer 6.0 (6.00.2900.2180)"). I haven't tried other versions of IE from the package, so their behavior is unknown. It starts up fine, but the address bar isn't shown. (Attempted to post image, but I'm a newbie on SU and it wouldn't let me. Can be found here.) View-Toolbars shows 'Address Bar' already selected. If I try to (de-)select Address Bar in that list, it crashes: Problem signature: Problem Event Name: APPCRASH Application Name: iexplore.exe Application Version: 6.0.2900.2180 Application Timestamp: 41107b81 Fault Module Name: StackHash_e162 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 00000000 OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: e162 Additional Information 2: e1625455580a00d3fda64a8cdf366fbb Additional Information 3: 58c7 Additional Information 4: 58c75753c6745fad91929ab6430a83fa That's not all that's wrong ('Search' pane has no contents as well, probably more), but it's the most glaring problem. I've seen some allusions to a registry change needed to fix this, but haven't been able to find any details. Anybody? I'm running the latest version of the collection, 1.7.0.6.

Read the article
ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

- by chickenloop

I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

Read the article
Better urls for this internal web server?

- by sprugman

I've got a server that I have admin access to, but don't fully manage. (I think it's a virtual machine, but I'm not 100% sure. It's running Apache on Windows Server 2003.) I share the ip with another user, so my sites all have to use the :8080 port. This is kind of ugly. Also, AFAIK, the only access I have is through an ip address. (I'm inside a corporate firewall and don't think I have access to a DNS server or anything.) I've adjusted my hosts file so I don't have to use the ip address on my local machine, but that's not a very generic solution. Are there any options to 1) get rid of the port requirement 2) be able to use a name (maybe a machine name) instead of the ip address in a generic way? (I'm not really a network admin -- I'm a developer managing this machine. The IT folks who really manage it are a few people away from me and tough to get to do anything, so I'm looking for a light-weight solution if possible.)

Read the article
How can I determine the IP addresses allocated by DHCP on a router that I'm connected to?

- by user234831

This "router" is not a typical situation. I'm using my phone as a hotspot and can only configure a select number of DHCP options. I can manage the limit on how many devices/clients can use my phone as a hotspot. I have to select from a radio-button list with the options: 2,3,4,5, or 8 I can specify the DHCP starting IP address. In this case, it begins at 192.168.6.106 When I'm connected via WIFI to my phone, an ipconfig /all command shows me that the default gateway is 192.168.6.1 and my IPv4 address is 192.168.1.148. I have the luxury of connecting another device to the phone and that device was assigned 192.168.1.121. I've tried connecting to 192.168.6.1, hoping for some sort of router setup page that I'm used to seeing, but there is no such thing or maybe it's just a matter of incompatable operating systems. In summary, the "router" (phone) has an IP address of 192.168.6.1 and a DHCP server that begins at 192.168.6.106 and allows up to 8 connections. Normally, I would assume a range of 192.168.6.106 - 192.168.6.113, but connected clients are showing otherwise. How can I figure out which IP addresses are set aside by DHCP for clients?

Read the article
Running Tor relay on personal server: can this hurt?

- by rxt

I would like to install TOR as relay on a hosted personal server. I have loads of bandwidth that I don't use. It's not an exit point. Can this hurt my server somehow? Possible problems I'm thinking of are blacklisting the IP-address, or something similar. I know that exit points get blacklisted on many servers. So if I'm using Tor as a client, I will probably use a blacklisted IP-address for the outside world, so cannot access those sites. However, I'm running this on a server, and as a public relay. Could this hurt the functioning of and access to websites on this server? I could install it as a bridge. I'm a little confused about the difference between bridging and relaying. If I understand correctly the only difference is that a relay is public. Does this mean that bridging only works if I know someone and give them my IP-address?

Read the article
Windows Server 2003 VPN and Local network

- by depo

I have some problems reaching local network , where VPN Windows 2003 server stands. I have a network, which has a VPN server (LAN ip 10.0.0.201). I created a VPN server on that server with different subnet for VPN users (10.0.5.0). After VPN connection is initiated , i am able to acces only 10.0.0.201, but not other PC, which belongs to that network ( all i need to access 10.0.0.203 and 10.0.0.208). I think i need to add somethink to static route table, or not? C:\Documents and Settings\Administratorroute PRINT IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.0.0.254 10.0.0.201 10 10.0.0.0 255.0.0.0 10.0.0.201 10.0.0.201 10 10.0.0.201 255.255.255.255 127.0.0.1 127.0.0.1 10 10.0.5.1 255.255.255.255 127.0.0.1 127.0.0.1 50 10.255.255.255 255.255.255.255 10.0.0.201 10.0.0.201 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 224.0.0.0 240.0.0.0 10.0.0.201 10.0.0.201 10 255.255.255.255 255.255.255.255 10.0.0.201 10.0.0.201 1 Default Gateway: 10.0.0.254 Persistent Routes: None C:\Documents and Settings\Administratoripconfig /all PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.0.5.1 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection Physical Address. . . . . . . . . : 00-0E-0C-3D-C9-51 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.0.0.201 Subnet Mask . . . . . . . . . . . : 255.0.0.0 Default Gateway . . . . . . . . . : 10.0.0.254 DNS Servers . . . . . . . . . . . : 127.0.0.1 Primary WINS Server . . . . . . . : 10.0.0.201 NetBIOS over Tcpip. . . . . . . . : Disabled VPN Client PPP adapter VPN Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VPN Connection 2 Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.5.4(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 10.0.0.201 Primary WINS Server . . . . . . . : 10.0.0.201 NetBIOS over Tcpip. . . . . . . . : Enabled

Read the article
A server which uses 2 IPs and is needed to give service (under NAT)

- by user6004

I have an internal server, which uses a certain service. This service listens on a port, and speaks on a different port. The problem with the service is that it can't listen and speak on the same IP address, so I have configured 2 IP addresses for that NIC, and so I "solved" the problem with the listening and speaking. I have a problem though... I need that server to be NATed, with a public IP address, and that server needs to be available from the outside (and as only one IP)... The question is, how do I solve the situation here? If I do a NAT for one IP address (the listening port), then he will be able to get requests from the outside, but won't be able to send out traffic (because the other IP won't have NAT). If I do NAT on both of the IPs, then when traffic comes in for the listening port, it won't necessarily arrive to the listening IP, but rather to the speaking one. I hope I made myself clear and that there is a sensible solution here that I am missing.

Read the article
Configuring iPad Mail app & Gmail app with different accounts? [migrated]

- by Steve Crane

I prefer to use the Gmail app over the standard Mail app on my iPad for reading my personal Gmail (I delete a lot of mails, newsletters, etc., after reading and this is one tap in Gmail and several in Mail). I have them set up so my personal Gmail uses the Gmail app and my work email is set up to use the standard Mail app. This all works fine except for one problem. If I'm in Gmail or Mail and send an email it sends from the relevant email address as expected. My problem is that when I share something via email from Safari or another app it sends from the email address configured in Settings for Mail (the work one) and I would prefer to do such sharing from my personal email address. Does anyone know if there is a way to achieve this? I could switch the addresses to use the other app but as I never delete work email and delete personal mail at least 50% of the time, the behaviour of the apps is perfect the way I have them set up; if only I could solve that one little problem of controlling where shared items are sent from. I am using an iPad 2 with iOS 5.1 should that be relevant.

Read the article
How can I get Solr listening on 0.0.0.0 instead of just localhost?

- by Neil

I'm trying to get Solr to listen on 0.0.0.0 instead of just localhost, and it doesn't seem to be picking up the configuration options. I downloaded apache-solr-1.4.1 from the Solr website, and I'm running: user@:apache-solr-1.4.1/example $ java -jar start.jar With these configuration options: <Call name="addConnector"> <Arg> <New class="org.mortbay.jetty.bio.SocketConnector"> <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> <Set name="port"><SystemProperty name="jetty.port" default="8983" /></Set> <Set name="maxIdleTime">50000</Set> <Set name="lowResourceMaxIdleTime">1500</Set> </New> </Arg> </Call> Where the only line changed from the default is this one: <Set name="host"><SystemProperty name="jetty.host" default="0.0.0.0" /></Set> And when I check netstat, I see this: $ netstat -an | egrep 'Proto|\b8983\b' Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:8983 0.0.0.0:* LISTEN tcp6 0 0 ::1:8983 :::* LISTEN Where Local Address should be 0.0.0.0:8983 instead of 127.0.0.1:8983. Does anyone know why this might not be working?

Read the article
VMware ESX Linux Guest Customization

- by andyh_ky

Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169 | Next Page >