Search Results

Search found 5387 results on 216 pages for 'dns sd'.

Page 163/216 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Slash Notation IP - What is what?

  - by Nirmal

  We just signed up with a new ISP and we got a static IP from them. Our previous ISP just gave one IP and we were able to configure our web server using that. Now, we have got this new IP with a slash notation. This type is new to me. When I used the CIDR calculator, it gave me the following results: 202.184.7.52/30 IP: 202.184.7.52 Netmask: 255.255.255.252 Number of hosts: 2 Network address: 202.184.7.52 Broadcast address: 202.184.7.55 Can someone please help me by explaining what these are? I could not understand what the number of hosts means. Is that telling that I can use two different IP for DNS (A) records? Also, which one should I setup in my router? The network address or broadcast address? Thank you very much for any answer you may provide.

  Read the article

• Email bouces to tell me it was delivered?

  - by flamey

  I get this back after sending an email. It says "Your message was successfully delivered", then why do I even get this? Or this phrase referes to something else? Reporting-MTA: dns; gmmr6.centrum.cz X-Postfix-Queue-ID: CDBBB8016CE1 X-Postfix-Sender: rfc822; [SENDER_EMAIL] Arrival-Date: Sat, 5 Mar 2011 22:04:41 +0100 (CET) Final-Recipient: rfc822; [RECIPIENT_EMAIL] Original-Recipient: rfc822;[RECIPIENT_EMAIL] Action: delivered Status: 2.0.0 Diagnostic-Code: X-Postfix; delivery via maildaemon: OK This is the mail system at host gmmr6.centrum.cz. Your message was successfully delivered to the destination(s) listed below. If the message was delivered to mailbox you will receive no further notifications. Otherwise you may still receive notifications of mail delivery errors from other systems. The mail system <[RECIPIENT_EMAIL]>;: delivery via maildaemon: OK

  Read the article

• SQL Express under IIS 7.5

  - by fampinheiro

  I´m developing a web service that access a SQL Express database, it works very well in the Visual Studio host but when i deploy it to IIS 7.5 i get this exception. Please help me. Stack Trace: System.Data.EntityException: The underlying provider failed on Open. ---> System.Data.SqlClient.SqlException: Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed. at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) --- End of inner exception stack trace --- at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) at System.Data.EntityClient.EntityConnection.Open() at System.Data.Objects.ObjectContext.EnsureConnection() at System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) at System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source) at WSCinema.CinemaService.Movie() in D:\Documents\My Dropbox\Projects\sd.v0910\trab3\code\WSCinema\CinemaService.asmx.cs:line 46

  Read the article

• jitter if multiple outliers in ggplot2 boxplot

  - by Andreas

  I am trying to find a suitable display to illustrate various properties within and across school classes. For each class there is only 15-30 data points (pupils). Right now i am leaning towards a whisker-less boxplot, showing only 1.,2. and 3. quartile + datapoints more then e.g. 1 population SD +/- the sample median. This I can do. However - I need to show this graph to some teachers, in order to gauge what they like most. I'd like to compare my graph with a normal boxplot. But the normal boxplot looks the same if there is only one outlier, or e.g. 5 outliers at the same value. In this case this would be a deal-breaker. e.g. test <-structure(list(value = c(3, 5, 3, 3, 6, 4, 5, 4, 6, 4, 6, 4, 4, 6, 5, 3, 3, 4, 4, 4, 3, 4, 4, 4, 3, 4, 5, 6, 6, 4, 3, 5, 4, 6, 5, 6, 4, 5, 5, 3, 4, 4, 6, 4, 4, 5, 5, 3, 4, 5, 8, 8, 8, 8, 9, 6, 6, 7, 6, 9), places = structure(c(1L, 2L, 1L, 1L, 1L, 2L, 1L, 2L, 1L, 2L, 1L, 2L, 2L, 2L, 2L, 2L, 1L, 1L, 2L, 2L, 2L, 1L, 2L, 1L, 1L, 1L, 1L, 2L, 1L, 2L, 1L, 2L, 2L, 2L, 1L, 2L, 1L, 2L, 2L, 1L, 1L, 2L, 2L, 1L, 1L, 1L, 1L, 2L, 1L, 1L, 2L, 2L, 2L, 1L, 1L, 2L, 2L, 1L, 2L, 1L), .Label = c("a", "b"), class = "factor")), .Names = c("value", "places"), row.names = c(NA, -60L), class = "data.frame") ggplot(test, aes(x=places,y=value))+geom_boxplot() Here there are two outliers at ("a",9) - but only one "dot" shown. So my question: How to jitter the outliers. And - what kind of display would you suggest for this kind of data?

  Read the article

• Failed to import SLES11 to SCOM2012

  - by siyang

  I try to the import my SLES11 to SCOM 2012, but failed. Below is my simple steps and failed error message. Import SLES11 mp DNS resolve both SCOM and SLES11 Install SCOM Agent and cert. Generated the cert from SLES11 then import it to SCOM, and use scxcertconfig -sign to refresh the cert, and back it to SLES11.(I restart the scxadmin on SLES11, and reboot the SCOM ) 5. On SCOM try to find the SLES11, but failed. Below is the error message. *Message: Certificate signing was not successful. Detials: Standard Output: Failed to start child process '/etc/init.d/scx-cimd' errno=13RETURN CODE:1 Standard Error: Exception Message:*

  Read the article

• Amazon EC2 SQL Server Connection

  - by cnxmax

  I have two instances running on Amazon AWS EC2. One is running MSSQL Server 2005, the other is running a web application. I CAN connect to the database in my app using a connection string that references the Public IP of my EC2 instance running SQL Server. I CANNOT connect from the web app server if I change the connection string to reference the database servers Private IP Address. But I can connect if I run that same code on the database server itself. I can remote desktop from the app server to the database server using the private IP. I have a feeling there is something in my SQL Sever configuration that is preventing this remote connection. I have remote connections enabled, I have it set to listen on all IP addresses. Any ideas? Other things I've done: - Added exceptions to Windows Firewall - Tried connecting to using EC2 DNS Names

  Read the article

• Squirrelmail got error after installation whm

  - by Pleerock

  Just now installed whm/cpanel, created some accounts, created mail account in one of them and entered squirrelmail to check the mail. Unfortunately it gives me an error: Warning: fsockopen() [function.fsockopen]: php_network_getaddresses: getaddrinfo failed: Name or service not known in /usr/local/cpanel/base/3rdparty/squirrelmail/plugins/login_auth/functions.php on line 129 Warning: fsockopen() [function.fsockopen]: unable to connect to localhost:143 (php_network_getaddresses: getaddrinfo failed: Name or service not known) in /usr/local/cpanel/base/3rdparty/squirrelmail/plugins/login_auth/functions.php on line 129 How do I fix it? I don't know exactly, but I read some sites and maybe the problem in dns? I changed ns1.com to ns1.myhost.com in a Basic cPanel & WHM Setup P.S. Im sure that it server configuration problem, not squirrelmail, other mail clients are not working too..

  Read the article

• auto m3u creation

  - by newbie69

  Hi, I am looking for a solution to automatically create .m3u playlists for each music folder in my sdcard so that the music player can play music by folders. I had written a simple VB.Net app in the past that does exactly the above but apparently, it has to be run from Windows. Since I have no Java nor Android developing experience I found it quite hard to try to write a similar app that can be run directly from the phone. In a few words, the app does the following: 1) Searches the SD and lists all folders that contain 2 or more .mp3 files (just for user verification) 2) Creates in every listed folder above, a .m3u file that simply lists line-by-line all the mp3 files that exist in the specific folder. Is there such an app or could someone spare some time and give me some rough instructions on how to create it in Eclipse 3.5.2 environment? (device used: Motorola Droid/Milestone, Android 2.1) I don't care about any graphics or complex UI, just a script to execute the above procedure that would give every "playlist-supporting" music player in Android, the precious ability to play music by folders. I know it is too much to ask but just in case! Thanx in advance.

  Read the article

• VirtualBox - Mac OSX host Win7 guest - no Internet access for guest VM

  - by nodelayheehoo

  I have a Mac running OSX 10.9.2, and I just downloaded and installed a Win7 IE9 VM in VirtualBox. My Mac uses Wi-Fi for internet access, and it's behind a proxy (it's a work machine). VirtualBox loads the VM fine, and at some point the VM can see the DNS servers of the host. But I've never been able to make the VM have internet access. I've tried all kinds of combinations of Network settings on the VM via the VirtualBox Settings, in conjunction with Internet Sharing in OSX's System Preferences, but no luck. Has anyone done a similar setup and made the VM successfully connect to the Internet? Thanks in advance for any inputs. [ Update: I was able to get internet access for the VM when the host was using my home network. When I ran the VPN software to connect to the work network, the internet access went away again.] (Initially posted this on stackoverflow.com, but it was put on hold as off-topic by several users, and was advised to ask here instead)

  Read the article

• Configuring NAT and static IP on Cisco 877W

  - by David M Williams

  Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

  Read the article

• Forwarding emails from a domain

  - by Euwyn

  I generally use Google Apps to handle email domains. I'm unfortunately stuck in an infinite loop with Google [1] for one the domains I recently picked up. Right now I use Zerigo's awesome DNS services. How can I get [email protected] forwarded to my Gmail account? Better yet if this is a free/cheap solution and can work with multiple aliases going to different real email addresses ([email protected] - [email protected], [email protected] - [email protected]) [1] Long story. I alternate between "Sorry, you've reached a login page for a domain that isn't using Google Apps." and "This domain has already been registered with Google Apps." Seems like many others are having this issue and Google isn't doing anything about it.

  Read the article

• How to use iptables to foward outbound web traffic to a proxy?

  - by jnman

  I've been hitting my head for a while as to how to do this. The scenario is as follows: I want to be able to forward all outbound web traffic from a browswer to Tor so that it is properly anonymized. Normally, one could just set the http proxy in the browser and be done with it but this is with a browser without the ability to do so specifically, a mobile browser. So ideally, what could be done then is to intercept all web/dns traffic requests from the browser and send it to Tor. Assume for this, that Tor will be running on the device too.

  Read the article

• Virtual machine on ubuntu

  - by MITHIYA MOIZ

  I have configured virtual machine on ubuntu with the help of below article, https://help.ubuntu.com/9.04/serverguide/C/libvirt.html I managed to finish all the part except the major portion getting virtual host to talk to real network, Which I guess should be done only via bridge interface. Via virtual machine manager I try to choose any interface it gives me interface not bridged When I try to bridge the interceface eth0 as below auto br0 iface br0 inet static address 192.168.0.223 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off I cannot communicate with this interface to network, host server looses all the communication to network. But when I remote bridge interface from /etc/network/interfaces And configure eth0 as below it works fine The primary network interface auto eth0 iface eth0 inet static address 192.168.0.223 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 dns-nameservers 62.215.6.51 gateway 192.168.0.1 how can i setup bridge interface correctly and how would my /etc/netwrok/interfaces file would look a like.

  Read the article

• What libraries will parse a DTD using PHP

  - by Chadwick

  I need to parse DTDs using PHP and am hoping there's a simple library to help out. Each DTD has numerous <!ENTITY... and <!-- Comment... elements, which I need to act upon. Note that I do not need to validate anything against these DTDs, simply parse them as data files themselves. A few options I've looked at: James Clarke's SD, which is an option of last resort, but I'd like to avoid the complexity of building/installing/configuring code external to PHP. I'm not sure it's even possible in my situation. PEAR has an XML_DTD_Parser, which requires installing/configuring PEAR and a number of pear modules, which I'm also not sure is possible, and would rather avoid. Has anyone used it with success? PHP XML Classes has the class_path_parser, which another site suggested, but it fails to read ENTITY elements. It appears to be using PHP's built in XML parsing capabilities, which use EXPAT. PHP's DOMDocument will validate against a DTD, so must be able to read them, though I don't see how to get at the DTD parser directly at first glance.

  Read the article

• What options to parse a DTD using PHP

  - by Chadwick

  I need to parse DTDs using PHP and am hoping there's a simple library to help out. Each DTD has numerous <!ENTITY... and <!-- Comment... elements, which I need to act upon. Note that I do not need to validate anything against these DTDs, simply parse them as data files themselves. A few options I've looked at: James Clarke's SD, which is an option of last resort, but I'd like to avoid the complexity of building/installing/configuring code external to PHP. I'm not sure it's even possible in my situation. PEAR has an XML_DTD_Parser, which requires installing/configuring PEAR and a number of pear modules, which I'm also not sure is possible, and would rather avoid. Has anyone used it with success? PHP XML Classes has the class_path_parser, which another site suggested, but it fails to read ENTITY elements. It appears to be using PHP's built in XML parsing capabilities, which use EXPAT. PHP's DOMDocument will validate against a DTD, so must be able to read them, though I don't see how to get at the DTD parser directly at first glance.

  Read the article

• Blocking the Apple OS X App Store

  - by Jon Rhoades

  Being the evil corporate IT overlords we need to block the new OS X App Store. As you may be aware the 10.6.6 update installs the App Store App which allows users to download and install apps without admin privileges. Some Suggestions: Don't update to 10.6.6+ Use parental controls Presumably some OD policy (if you have an OD server which we don't) Block the App store by DNS or Proxy Not updating to 10.6.6+ isn't really a long term solution as it contains security fixes and new Macs will come with it anyway. Blocking the App store at a network level doesn't solve laptop users. Ideally a simple system preference or editing of a plist that can be pushed out by ARD would be the best solution. Please note the question isn't should we block the App store, it's how we can block the App store.

  Read the article

• Freeware Local Proxy for Proxy Chaining with HTTPAUTH

  - by pepoluan

  I am looking for a freeware local proxy to perform proxy-chaining with HTTPAUTH. To explain my situation: In my workplace I am forced to keep switching between several internet-connected apps, and thus everytime I have to type in the credentials (or, at least, click on 'OK' to send my previously-saved credential). To make matters more annoying, the proxy login times out every 30 minutes, requiring me to lather-rinse-repeat the whole annoyance. I'd like to just point them all to a locally installed proxy which will on its own perform the required HTTPAUTH against the corporate proxy. I've tried Cntlm, but it always fail to authenticate (and according to this thread, that is due to the proxy using HTTPAUTH which is not supported by Cntlm) Any suggestions? ETA: I found Polipo, but it's kinda wonky on Windows. Especially if I visit a new URL, and the DNS server is a bit slow, then Polipo will simply drop/refuse the connection. And I have to put my password in plaintext. If there's a better suggestion, I'm all ears.

  Read the article

• Multiple Subnets on home network... would this work?

  - by rockinthesixstring

  We are looking at renting out the basement suit in our home and want to offer internet as part of the package. I however do not want the downstairs tennent to have access to our network (home office = private data). We currently have a pfsense firewall as our gateway and a Windows Server 2003 box is doing our primary DHCP (192.168.0.0/24) and DNS. Here's what I'd like to do... I'd like to setup another subnet on the DHCP server (192.168.1.0/24), and hook in another wireless router (as access point only) and address it as 192.168.1.1... from there the router will hook into our primary switch and then out through the firewall. Will Server 2003 (If I add a 192.168.1.x/24 IP to the nic) serve DHCP to the devices that connect to the new router, and will it isolate that from our network? Thanks in advance... I'm very new to multiple subnets.

  Read the article

• redirect on a Domino HTTP server?

  - by oidsman

  Simple question but:- We have a server running Domino Http server on port 80. We have another apache server running on 8081. We want to set a DNS entry (say 'Things') to point to a page on the 8081 server. As I see it we need to do some kind of redirect on the Domino server to say that any traffic from hostname 'Things' gets a redirect to "http://server:8081/content/". So, in summary, if I type in "http://Things" on my browser I get redirected to "http://server:8081/content/" Does anyone know how to do this on the Domino Http server? Thanks in advance for your help!

  Read the article

• Accessing through VPN, which internet connection would be used

  - by Sriram

  I've a data card which has a limit of 2 GB up/download traffic per month. I've an office internet line which has an unlimited up/download. I've successfully connected to VPN using my data card and by changing certain configurations like DNS etc., have also been able to use my office line for internet (verified by doing a IP check - returns the static IP of our office). Now to my question - is it just a NAT which is happening or am I actually using my office line for all communication. Which one would reflect the usage/trace. The data card usage log at this moment does not reflect any usage (which is confusing since the VPN is over the data card connection). Further more (theoretically), would the net be any faster if my office line is let us say 8Mbps and the data card is 512kbps by doing this as against directly connecting the internet using the data card.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• FTP in DMZ, TCP Ports for LDAP Auth

  - by sam

  szenario: (outside)---(ASA5510)---(inside) -Windows2008 DC .....................(dmz) ..........-Win2008 FTP Server Which Ports do I need to open from DMZ-Inside that FTP Users can authentificated on the Inside DC? I have allready opend 389 (Ldap), 636 (secure Ldap) and 53 (dns). But the ftp Client stucks allways after processing the credentials and the FTP Server gives you an eventlog "logon error". the error messages indicates that there could be an issue with closed ports. if I turn the ACL to "IP", that means all ports are open, everything is working fine.

  Read the article

• Virtual Hosting in RHEL 5

  - by Kumar P

  We have a RHEL 5 Linux server with a few Windows XP clients. We provide web development in PHP. Now my developers as for common local PHP server for keep their projects in same place. Currently the proxy server and Samba sharing are running on the RHEL 5 server. I installed httpd, PHP and MySQL in the server. And I would like to configure virtual hosting too for LAN. What I want do for it? We have 2 Ethernet ports in the server, 1 for local connections and another one for Internet. Internet is provided by an ADSL provider. (192.168.0.0 series for ADSL modem connection and 10.1.1.0 for the LAN connection. If I want to use virtual hosting, do I need to setup local DNS server? My requirements are: setup PHP with MySQL server for local clients with multiple hosting, without disturbing proxy and Samba.

  Read the article

• XenServer VM's lose network settings

  - by Ash

  We deploy virtual machines using Citrix XenServer 6.0 for our clients. Two seperate clients experience the same issue: when a Server 2008 virtual machine is restarted, the static IP addresses (network address, subnet, gateway, primary DNS) don't appear to apply correctly as the IP's cannot be pinged, network services cannot be accessed etc. The issue is resolved by manually switching the network adapters to DHCP, then re-setting them to the original static IP's. While not a major issue, it's a pain when restarting servers due to Windows Updates, plus iSCSI drives need to be manually connected to Windows again via iSCSI Initiator. We have tried removed the network adapters from the virtual machine under XenCentre but without luck. Anyone experienced similar issues?

  Read the article

• Netsh commands not working on remote computer

  - by Mike Christiansen

  Hello, At work, we are in the process of migrating over 200 computers from static IPs to DHCP. The DHCP server is configured. My biggest hurdle is physically going to every single computer in the area and configuring them all for DHCP. I am trying to use netsh to accomplish this. However, I cannot even seem to set one computer to DHCP remotely. The command I am trying is: netsh -r COMPUTERNAME interface ip set address name="Local Area Connection" source=dhcp netsh -r COMPUTERNAME interface ip set dns name="Local Area Connection" source=dhcp This results in the error The following command was not found: interface ip set address "name=Local Area Connection" source=dhcp. Any ideas?

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >