Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 163/1213 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• What package is meant to replace thinkfinger in 11.10?

  - by misterhaan

  My laptop has a fingerprint reader that until 11.10 I used via thinkfinger. That package is no longer in the repositories, but I assume there’s a different package meant to support fingerprint readers in thinkfinger’s place. What is the recommended fingerprint reader package? Should I just find thinkfinger on my own and use that instead? Here’s my reader’s lsusb output: Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader

  Read the article

• How to start gnome-shell?

  - by Tim

  I successfully installed GNOME 3 and GNOME Shell from the Launchpad PPA on my fully updated Natty test system. However, nothing I tried could get it to actually run. If I selected it in the startup options, I got a plain light blue screen with absolutely nothing on it. If I tried to start it using gnome-shell --replace, I got: gnome-shell --replace & [2] 3251 tim@nattytest:/usr/lib$ Traceback (most recent call last): File "/usr/bin/gnome-shell", line 705, in <module> normal_exit = run_shell() File "/usr/bin/gnome-shell", line 293, in run_shell if shell is None: UnboundLocalError: local variable 'shell' referenced before assignment /usr/bin/compiz (core) - Error: Screen 0 on display ":0.0" already has a window manager; try using the --replace option to replace the current window manager. [2]+ Exit 1 gnome-shell --replace I also tried preceding that with metacity --replace, as suggested at ubuntuforums.com. But, I got the same failure. I also linked /usr/lib/libmozjs.so to /usr/lib/xulrunner-2.0b12/libmozjs.so, which did not help either. No matter what I try, I get the same error messages.

  Read the article

• Can't specify window's class in CCSM's Place Windows

  - by Anto

  Following this method, I wanted to "place" some of my windows on specific viewports. For instance, I want Xchat to always start on my top right viewport (x=2, y=1). But after I have set everything up and clicked the "Close" button to validate it (I don't have any other action button, like "OK" or "Apply"), the only thing that get saved up are the viewport X and Y coordinates. The window class (in my case class=Xchat) remains empty. This bug only occurs in the "Windows with fixed viewport" section; it works well in the "Windows with fixed placement mode", for instance. How can I solve or circumvent this issue ?

  Read the article

• Reliable alert dialogs from the shell

  - by intuited

  I'd like to have a message pop up in response to various system events, mostly in order to be able to set reminders for myself from a shell session. There are a few ways to do this; zenity seems to be the most polished. However, I've found at least two problems with zenity: Messages do not appear on all workspaces. I tried using the gtk option --screen to control this, but they just appear on the current workspace regardless. So if I am switching workspaces as the message comes up, I will not see it. Messages do not appear above all other windows. Specifically, if I am using guake, a new zenity message will appear below the guake window and I won't be able to see it. I tried a few other apps a while back. Both gmessage and xmessage exhibited problem 1; gmessage also exhibited problem 2. I did find that kalarm, which can be scripted from the command line, worked acceptably, but I'm trying to avoid running the KDE stack if possible, and would prefer something lightweight with zenity's versatility. It seems that it might be possible to arrange for these problems to be resolved by setting the WM_CLASS, but I'm in a bit over my head there. It might also be possible to make modifications to the window after it launches with a script, but again I'm not sure where to look for resources on that.

  Read the article

• ALC889 - GA-P55-UD4 -no sound - Ubuntu 11.10

  - by george

  I have computer with a Gigabyte P55A-UD4 motherboard. I have on-board audio - Realtek ALC889. I am using Ubuntu 11.10 and have no sound. please please heeeelp :). i have tryed to install high definition audio codecs from realtek but it doesn't work. in bios the azalia codec is turned on. ps : sorry for my english. 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.1 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.2 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1a.7 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.1 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.2 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.3 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06) 00:1d.7 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 04:00.0 IDE interface: Marvell Technology Group Ltd. Device 91a3 (rev 11) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 06:03.0 IDE interface: Integrated Technology Express, Inc. IT8213 IDE Controller 06:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) 3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) aplay -l karta 0: Intel [HDA Intel], urzadzenie 0: ALC889 Analog [ALC889 Analog] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 0: Intel [HDA Intel], urzadzenie 1: ALC889 Digital [ALC889 Digital] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 3: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 7: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 8: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0 karta 1: NVidia [HDA NVidia], urzadzenie 9: HDMI 0 [HDMI 0] Urzadzenia podrzedne: 1/1 Urzadzenie podrzedne #0: subdevice #0

  Read the article

• ubuntu 10.10 does not recognize usb sticks and drives

  - by Peter

  When connecting any usb stick to my thinkpad ubuntu 10.10 does not recognize them. I don't see anything on the desktop. the output of "dmesg | tail -n10" gives me: [ 1965.696388] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1965.884537] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.072503] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.260349] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.506227] usb 1-1: new high speed USB device using ehci_hcd and address 9 [ 1966.572375] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.760379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1966.948358] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.136335] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1967.325423] hub 1-0:1.0: unable to enumerate USB device on port 1 When connecting my usb scanner to the same port: [ 2008.480135] usb 1-1: new high speed USB device using ehci_hcd and address 65 [ 2008.548389] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.736786] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2008.924379] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.112348] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.300443] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.488536] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2009.732180] usb 1-1: new high speed USB device using ehci_hcd and address 71 [ 2014.796299] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2018.000128] usb 2-1: new full speed USB device using uhci_hcd and address 3 And ubuntu 10.10 recognizes that scanner. So: What can i do to see my usb stick? BTW: on my other Thinkpad running fedora 14 it works perfectly... Cheers -Peter

  Read the article

• How can videos from Ubuntu drive appear on web page and play in an embedded Flash Player?

  - by nLinked

  I have a shared folder on Ubuntu Server 12.04. Users drop videos in. Ubuntu runs a Cron task to convert them to FLV format and put them into another folder. All I would like is a simple web page that displays all the files in that folder as links, and when you click on the link for the video you want to play, it should play in the same web page inside an embedded Flash/SWF player. Sounds really basic but I'm actually struggling to find a simple solution. Any thoughts appreciated!

  Read the article

• Run virtualbox in other X session

  - by Valicek1

  I'm running ubuntu on my laptop (host). Inside ubuntu, there is running one instance of virtualbox. (where is installed MS Windows). My idea is to run virtualbox in separate X session (something like multiuser). If it is not clear, i'll try to explain... When I want to visit tty1, I'll press CTRL+ALT+F1. To return to my Unity desktop, I'm gona use CTRL+ALT+F7... And here comes what I need. After pressing CTRL+ALT+F8 show fullscreen virtualbox windows system, just to switch as ttys.. I am using Ubuntu 14.10. I have wasted hours by using google to find some solution, but my biggest prolem is I cannot name the problem.

  Read the article

• How to check the information of current installed video drivers on Ubuntu?

  - by smwikipedia

  Hi guys, I have just installed Ubuntu 10.04. My CPU usage is high when I do trivial things such as scrolling through a PDF file. So I think my video driver is not properly installed. I want to confirm that by checking the information of my currently installed video driver, such as if there's a driver installed and what version it is. Then I could decide whether to install a new one if it is not up to date. On Windows, I could use the device manager, how to do that on Ubuntu Linux? I don't expect a GUI solution for this. Command line will be just good enough. Many thanks.

  Read the article

• How do I install Nautilus-Elementary?

  - by Srinivas G

  I've added the am-monkeyd PPA and upgraded my system. Yet, there's no sign of elementary in my fresh Maverick RC install. Have I done anything wrong? The PPA upgrades the default nautilus package and there is no separate "nautilus-elementary" package as of now. Now, there are three versions listed in the package properties: 1:2.32.0-0ubuntu1-ppa1 (maverick); 1:2.32.0-0ubuntu5~ppa5 (maverick); 1:2.32.0-0ubuntu1 (maverick); Anything you can make out from this?

  Read the article

• Will an Atheros AR928X work with WPA2?

  - by Tommy

  Basically I need only the answer to above question. Please think of that I am new to linux. For further explanation here is the full story: I have the following problem. My friends notebook (Vista) has got a trojan and refuses to work anymore. The Avira Rescue CD did not help either. So I tried an old (9.1) Ubuntu CD and backed up all the essential files. Since we have no Windows Install Disk we want to put Ubuntu on that notebook. But with the 9.1 version there is no WLAN. Systemtest tells me, that it finds an Atheros AR928X, but ifconfig does not show that and the network manager tells me there are no LAN/WLAN devices. So: does that work easier with the new Ubuntu version or is that network adapter a known troublemaker? And: if I get the adapter to work, will it work with the WPA2-network around here?

  Read the article

• Can I blacklist an appindicator?

  - by d3vid

  I've whitelisted some indicators for apps that don't yet have Unity-compliant appindicators. Is there any way to blacklist appindicators for apps that are Unity-compliant (not old-style indicators) but don't provide a "Don't show in the system tray" option? Any solutions to ban an appindicator from being displayed, GUI- or CLI-based, are welcome. (I'm not looking for a way to just hide them like you can hide system tray icons in Windows.) (New-style appindicators can't be removed from the systray-whitelist.)

  Read the article

• How Do I Print Photos?

  - by Takkat

  Other than for Windows in Ubuntu there are no fancy utilities provided from printer manufacturers to print photos. I am aware of Gnome Photo Printer and of Photoprint, the first being easy to handle, the latter having more options. However I wonder if there are any other or maybe even better alternatives (including plugins) to perform the following tasks: Print photos in the best photo-resolution the driver offers Adjust paper size for standard values of photo papers Choose paper tray if the printer has more than one Print out multiple photos on one page including mixed sizes (grids) Multiple prints with same settings Borderless printing if the printer is capable of this Any additional options like pre-processing for color correction or noise reduction would be nice to have but are not so essential. Update According to this spec it seems not to so easy to accomplish the simple task of printing photos. Indeed all applications I have gone through have major drawbacks that make printing photos almost impossible. Below I will list what put me off using them for photo printing: Gnome Photo Printer: no thumbnails, no grids Photoprint: does not keep settings, GUI broken, no standard photo size, no thumbs Eye Of Gnome: no multiple pages, no grids Gimp + Images Grid Layout: far too many steps to finally find that prints are always different to their previews. F-Spot: no grids Picasa 3: no grids, very few fixed paper sizes, 300 dpi only flPhoto: strange GUI, no thumbs, no printer settings, did not print at all Windows: Ooops - everything works fine! But I want Ubuntu to do this! After half a pack of ink cartridges and half a pack of photo paper cards I am getting tired of testing. At least Gimp and Picasa looked promising but both don't keep their promise when it comes to printing. I'd already be happy to quickly print a few photos with EOG if bug #80220 was fixed - but it's still on "wishlist".

  Read the article

• Some problems with the keyboard layout

  - by user203053

  When I press some keys, sometimes some letters are replaced by others. For example e is replaced with "0we" and c with "x9a". Also other keys are changed. My keyboard layout is actually German. But whenever this problem occurs, it changes to English and I cannot change it back. Occasionally everything works fine. How do I find out whether the keyboard is damaged or just some settings are not right?

  Read the article

• Why do I have to have CapsLock permanently ON

  - by Patrick Mann

  Initially, I believed this was on OpenOffice problem but Abiword and, indeed, Gedit, display the same problem, so it must be an Ubuntu glitch. I was typing a document and used CapsLock when creating a title. Now, when I turn CapsLock off, everything is in caps - when I turn it on, everything is in lower case. I can cope with this if I leave CapsLock on permanently but this is not what is supposed to happen. CapsLock OFF = NO CAPS (or should do!). Can anybody help with this? I've searched around this forum but, not being much of a forum user, I was unable to find a solution. It's entirely possible that I had a 'finger-fit' and hit a combo of buttons which included CapsLock but I don't remember doing that. I'm running Ubuntu Netbook Edition 10.04 on an HP Intel PC. If you need any more System specific stuff, just shout. Thanks, Patrick

  Read the article

• How to reinstall Ubuntu keeping my data intact?

  - by Santosh Linkha

  I want to reinstall Ubuntu keeping my data intact. I have 160 GB hardrive (sata or pata I don't know but it's slim and made in China) with a 40 GB ext3 partition, a 4GB swap memory and 3 other partition with a FAT32 file system. I have around 4GB space on my drive where Linux is installed. I'd like to keep the data intact, especially the Downloads folder, desktop, and /var/www; And I no longer have access to any other machines or external storage devices.

  Read the article

• Ubuntu Lagging even LXDE freezes

  - by Anas Ismail Khan

  Laptop, i3, Ram: 2GB. Using 14.04LTS... and it lags like hell. Even if i open more than 4 tabs in Chrome, it freezes, and often I have no choice but to restart and multi-tasking is kinda difficult and at times impossible. Now there's whole thing about Lubuntu and LXDE that are suposed to be super-fast.. installed LXDE.. mind, not lubuntu-desktop. just LXDE. And it too freezes every now and then, and trust this.. when it freezes, it does so worse than Unity.. ESPECIALLY when i start PCManFM... and mount a disk or two... Any ideas as to why this is happening.. The minimum requirements for Unity are supposed to be 1Gig RAM.. and people are running it fine even on 512 MB...

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Tomboy error while tring to sync with Ubuntu one; Can anyone help?

  - by Michael Chapman

  So I'm sure you've heard the song before, but after trying to sync my notes with Ubuntu One(on 10.10 AMD64) I get "Could not synchronize notes. Check the details below and try again." Of course the problem is that there are no details and trying again doesn't help. So I ran tomboy -debug and compared my error to any thing I could find about similar problems (such as the post here) but found nothing useful. Any way here's my first error, I got this using preferencessynchronizationUbuntu_one [ERROR 21:08:42.271] Synchronization failed with the following exception: String was not recognized as a valid DateTime. at System.DateTime.Parse (System.String s, IFormatProvider provider, DateTimeStyles styles) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s, IFormatProvider provider) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.NoteInfo.ParseJson (Hyena.Json.JsonObject jsonObj) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNoteArray (Hyena.Json.JsonArray jsonArray) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNotes (System.String jsonString, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.GetNotes (Boolean includeContent, Int32 sinceRevision, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.WebSyncServer.GetNoteUpdatesSince (Int32 revision) [0x00000] in <filename unknown>:0 at Tomboy.Sync.SyncManager.SynchronizationThread () [0x00000] in <filename unknown>:0 The next thing I tried was using preferencessynchronizationtomboy_web with the default 'http://one.ubuntu.com/notes/' and got the same error plus one more. [ERROR 21:12:31.949] System.ObjectDisposedException: The object was used after being disposed. at System.Net.HttpListener.CheckDisposed () [0x00000] in <filename unknown>:0 at System.Net.HttpListener.EndGetContext (IAsyncResult asyncResult) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.WebSyncPreferencesWidget.<OnAuthButtonClicked>m__1 (IAsyncResult localResult) [0x00000] in <filename unknown>:0 [ERROR 21:13:19.245] Synchronization failed with the following exception: String was not recognized as a valid DateTime. at System.DateTime.Parse (System.String s, IFormatProvider provider, DateTimeStyles styles) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s, IFormatProvider provider) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.NoteInfo.ParseJson (Hyena.Json.JsonObject jsonObj) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNoteArray (Hyena.Json.JsonArray jsonArray) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNotes (System.String jsonString, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.GetNotes (Boolean includeContent, Int32 sinceRevision, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.WebSyncServer.GetNoteUpdatesSince (Int32 revision) [0x00000] in <filename unknown>:0 at Tomboy.Sync.SyncManager.SynchronizationThread () [0x00000] in <filename unknown>:0 I Have also tried removing then re-adding My computer from my Ubuntu One account, but that did not help either. The only other Thing I have noticed is that under systempreferencesubuntu one services, "Notes" is not listed as a service. I don't know if this is normal or not. Thanks for any help and please let me know if anything is confusing.

  Read the article

• ALT+SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick

  - by Andrei

  I'm trying ALT+SysRq+REISUB to see how it would be used to restart my system safely in case of emergency. However, I find that ALT+SysRq+REISUB hangs at "resetting" (without actually resetting/restarting) in Maverick. All other SysRq combinations appear to work correctly (i.e. ALT+SysRq+REISU). cat /proc/sys/kernel/sysrq returns 0. But I'm not sure it's relevant because ALT+SysRq certainly works. What can I do to have "B" actually restart the system? Thanks!

  Read the article

• sell ccv good and fresh sell cvv all country fullz info

  - by underworld

  ICQ: 640240418 YH: underworld_cvv Mail: [email protected] WELCOME TO MY UNDERWORLD ! I'm is Professional seller,more than 5 years experience,i started work in 2008,i have sold cvv credit card to many customers all over the world. Selling cvv, fullz many country as: Canada,USA,Australia,UK...all And many country in Europe: Fr,Ger,Spain,Ita... I hope we will work together for a long time. Always sell cvv quality with high balance. I have a website but if you want buy cvv good price please contact me. Have Cvv with Bin or Cvv with DOB,VBV if customer claim. List Price Some Cvv (good price for good buyer) -Us: 5$ /1 -Us VBV-DOB : 8$ /1 -Us fullz : 40$ /1 -Us (amex,discover) : 8$ /1 -Ca : 10$ /1 -Ca DOB : 20$ /1 -Ca fullz : 50$ /1 -Ca with bin : 15$ /1 -Au : 10$ /1 -Au DOB : 20$ /1 -Uk : 10$ /1 -Uk DOB-VBV : 20$ /1 -Fr : 15$ /1 -Fr DOB-VBV : 25$ /1 -Ger : 18$ /1 -Ger with DOB : 25$ /1 -Spain : 15$ /1 -Spain Fullz : 40$ /1 -Ita : 15$ /1 -Ita with DOB : 25$ /1 -Japan : 15$ /1 -Japan with DOB : 25$ /1 Cvv random country -Denmark : 25$ /1 -Sweden : 20$ /1 -Switzerland : 20$ /1 -Slovakia : 20$ /1 -Netherlands : 18$ /1 -Mexico : 15 /1 -Middle East : 18$ /1 -New zeland : 18$ /1 -Asia : 15$ /1 -Ireland : 18$ /1 -Belgium : 15$ /1 -Taiwan : 15$ /1 -UAE : 20$ /1 And many country... Some Bins -Us bins: 517805,488893,492536,408181,542432,482880,374355,374372... -Ca bins: 450003,450008,451242,450060,549198,533833,519123,544612... -Uk bins: 4547,5506,5569,5404,5031,4921,5505,5506,4921,4550... -Ger bins: 492942,490762,530127... -Au bins: 543568,450605,494053,450606,456475,521893,519163... -Fr bins: 497847,497831,497841,497849,497820,497825,497833... -And others bins for others country... Format France fullz Nom : di murro Prenom : mariano Adresse : rue des caillettes Ville : Corbeil Essonnes Code Postale : 91100 Telephone : 33672492372 ========== (2eme Tape) ========== Nom de Bank : crédit agricole Nom de Carte Bancaire : di murro mariano Date de naissance : 12 / 02 / 1969 Type de carte : MasterCard Numero de carte : 5131018223855xxx Numero de compte : Date d'expiration : 10 / 2014 CVN : 336 -WARRANTY time is 12 HOURS. Any cvv purchase over 12 hours can not warranty. -If you buy over 30 cvvs, i will sell for you best price. -I will discount for you if you are reseller or you order everyday many on the next day. -I only accept payment money by PerfectMoney (PM) Western Union (WU) and MoneyGram. -I will prove to you that I am the best sellers. And make sure you will enjoy doing business with me. Contact: ICQ: 640240418 YH: underworld_cvv Mail: [email protected]

  Read the article

• Dell Studio 1737 Overheating

  - by Sean

  I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

  Read the article

• shell script to set time and date on ubuntu

  - by glapo

  my desktop CMOS battery is not working, therefore I have to set time and date each time my computer starts up. I want to create a shell script to automate the setting of date and time on my computer after each boot is complete. options that exist include: 1. buying a CMOS battery :- am considering this, but for the meantime a shell script will do. 2. using NTP to synchronize time and date with internet servers :- am not connected to the internet.

  Read the article

• How to start /usr/bin/bitcoind on boot?

  - by André

  I'm trying to get /usr/bin/bitcoind to start on boot but without success. I have this script on /etc/init/bitcoind.conf description "bitcoind" start on filesystem stop on runlevel [!2345] oom never expect daemon respawn respawn limit 10 60 # 10 times in 60 seconds script user=andre home=/home/$user cmd=/usr/bin/bitcoind pidfile=$home/.bitcoin/bitcoind.pid # Don't change anything below here unless you know what you're doing [[ -e $pidfile && ! -d "/proc/$(cat $pidfile)" ]] && rm $pidfile [[ -e $pidfile && "$(cat /proc/$(cat $pidfile)/cmdline)" != $cmd* ]] && rm $pidfile exec start-stop-daemon --start -c $user --chdir $home --pidfile $pidfile --starta $cmd -b -m end script After creating this script I've run the command: sudo initctl reload-configuration When I restart Ubuntu the "bitcoind" does not start. I only can start "bitcoind" running manually the command: sudo start bitcoind Any clues on how to start "bitcoind" on boot?

  Read the article

• Error when I try to installth desktop integration features for Openoffice

  - by PENG TENG

  peng@peng-ThinkPad-SL410:~$ cd '/home/peng/Downloads/en-US/DEBS/desktop-integration' peng@peng-ThinkPad-SL410:~/Downloads/en-US/DEBS/desktop-integration$ sudo dpkg -i *.deb (Reading database ... 357248 files and directories currently installed.) Unpacking openoffice.org-debian-menus (from openoffice.org3.4-debian-menus_3.4-9593_all.deb) ... dpkg: error processing openoffice.org3.4-debian-menus_3.4-9593_all.deb (--install): trying to overwrite '/usr/bin/soffice', which is also in package libreoffice-common 1:3.6.2~rc2-0ubuntu3 /usr/bin/gtk-update-icon-cache gtk-update-icon-cache: Cache file created successfully. /usr/bin/gtk-update-icon-cache gtk-update-icon-cache: Cache file created successfully. Processing triggers for menu ... Processing triggers for hicolor-icon-theme ... Processing triggers for gnome-icon-theme ... Processing triggers for shared-mime-info ... Unknown media type in type 'all/all' Unknown media type in type 'all/allfiles' Unknown media type in type 'uri/mms' Unknown media type in type 'uri/mmst' Unknown media type in type 'uri/mmsu' Unknown media type in type 'uri/pnm' Unknown media type in type 'uri/rtspt' Unknown media type in type 'uri/rtspu' Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Errors were encountered while processing: openoffice.org3.4-debian-menus_3.4-9593_all.deb Can anyone solve the problem?

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >