Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 166/1213 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• ibus-avro is not working in ubuntu 12.10

  - by Apurba

  I was using ibus-avro with ibus input method to write Bengali in Ubuntu 12.04. Recently I have upgraded Ubuntu from 12.04 to 12.10, now ibus-avro was removed. I have tried to install it again but was getting error message as follows Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: ibus-avro : Depends: gir1.2-gjsdbus-1.0 but it is not installable Please help Regards Apurba

  Read the article

• Migrating a Windows Server to Ubuntu Server to provide Samba, AFP and Roaming Profiles

  - by Dan

  I'm replacing our old Windows XP Pro office server with a HP Microserver running Ubuntu Server 12.04 LTS. I'm not a Linux expert but I can find my way around a terminal prompt, I'm a Mac user by choice. The office use a mix of Windows XP Pro machines and OSX Lion laptops. I included Samba during installation, and I'm planning on using Netatalk for the AFP and Bonjour sharing. I'd quite like to have samba make the server appear in 'My network places' on the Windows machines the way Bonjour makes it appear in finder on the Macs, if this is possible? I want to get to a point so that a user logging into Windows, gets connected to the Ubuntu server (do they need an Ubuntu user account?) which get them their shares and their Windows user profile (though a standard profile across users would do). The upshot is to make centralised control of user accounts (e.g. If a person leaves, killing their account on the server stops their Windows logon and ability to access Samba shares) and to ensure files aren't stored on the individual machines for backup/security purposes. I want to make this as simple as possible, so don't want to have loads of stuff I don't need, I just can't figure out: What I need at the server end: - will Samba be enough (already installed as part of initial installation), or will I need to cock around with LDAP (and how does this interact with Samba) - For someone of moderate Linux competence like me, is there a package that offers easy admin of user accounts, e.g. a GUI like phpLDAPadmin (if LDAP is necessary) How to configure the XP machines: - do I need to have the XP machines set up as a domain controller (I've no idea, really) - roaming profiles looks to offer the feature of putting the user's files on the server rather than the machine itself along with a profile that follows the user from machine to machine. Syncing Mac user's home folders with the server This is less of a concern because I can set up Time Machine if it comes to it, but I'd appreciate any recommendations of what approach I should take having the Mac home folders synced to the server.

  Read the article

• I have 6 updates that won't install on Ubuntu 12.04?

  - by Taylor

  I'm an Ubuntu novice, so any help here is greatly appreciated! I'm running Ubuntu 12.04, and I have six updates that just won't install. I've tried Update Manger, sudo apt-get upgrade, and sudo apt-get update. Nothing has worked so far. Here are the details I get from Update Manager: installArchives() failed: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... No apport report written because MaxReports is reached already Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 No apport report written because MaxReports is reached already Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3685 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev:No apport report written because MaxReports is reached already fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic-pae linux-image-3.2.0-27-generic-pae linux-image-3.2.0-29-generic-pae udev xserver-xorg-core fglrx fglrx-amdcccle linux-image-generic-pae linux-generic-pae xserver-xorg-video-intel fglrx-dev Error in function: Setting up linux-image-3.2.0-24-generic-pae (3.2.0-24.37) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-24-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-29-generic-pae (3.2.0-29.46) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-29-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-27-generic-pae (3.2.0-27.43) ... Running depmod. sh: 1: /usr/sbin/update-initramfs: not found Failed to create initrd image. dpkg: error processing linux-image-3.2.0-27-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 Setting up udev (175-0ubuntu9.1) ... udev stop/waiting udev start/running, process 3782 /var/lib/dpkg/info/udev.postinst: 87: /var/lib/dpkg/info/udev.postinst: update-initramfs: not found dpkg: error processing udev (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-24-generic-pae; however: Package linux-image-3.2.0-24-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-core: xserver-xorg-core depends on udev (= 149); however: Package udev is not configured yet. dpkg: error processing xserver-xorg-core (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx: fglrx depends on xserver-xorg-core; however: Package xserver-xorg-core is not configured yet. dpkg: error processing fglrx (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.24.26); however: Package linux-image-generic-pae is not configured yet. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of xserver-xorg-video-intel: xserver-xorg-video-intel depends on xorg-video-abi-11; however: Package xorg-video-abi-11 is not installed. Package xserver-xorg-core which provides xorg-video-abi-11 is not configured yet. xserver-xorg-video-intel depends on xserver-xorg-core (= 2:1.10.99.901); however: Package xserver-xorg-core is not configured yet. dpkg: error processing xserver-xorg-video-intel (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-amdcccle: fglrx-amdcccle depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-amdcccle (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of fglrx-dev: fglrx-dev depends on fglrx; however: Package fglrx is not configured yet. dpkg: error processing fglrx-dev (--configure): dependency problems - leaving unconfigured

  Read the article

• How to install Awesome WM without root access?

  - by ssice

  I want to install the Awesome window manager. In the environment where I want to configure it I don't have root access. I do have a machine were I can be root (I use for this a virtual machine in my laptop). I have tried the following: $ sudo apt-get install awesome The following packages are about to be installed: awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap Do you want to continue [Y/n]? n I do now have the list of dependencies for awesome, so I downloaded them all. For that, I did the following. $ pkgs="awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap" # this is just for not writing it all ;) $ sudo apt-get install --download-only $pkgs .... $ mkdir -p /tmp/x_debs $ for pkg in $pkgs; do cp /var/cache/apt/archives/$pkg* /tmp/x_debs/; done [ copies all *.deb from my dependencies to /tmp/x_debs ] Now, I want to install the dependencies. For that, I setup a fake dpkg install in my home folder: $ mkdir $HOME/root $ mkdir -p $HOME/root/var/lib/dpkg/{triggers,updates} $ touch $HOME/root/var/lib/dpkg/{available,status} Now I tried to install with dpkg, but I could not: $ dpkg --force-not-root --root=$HOME/root --recursive -i /tmp/x_debs It failed while trying to set permissions for the packages and running chroot. As I do have root access in this machine, I ran it with privileges: $ sudo dpkg --root=$HOME/root --recursive -i /tmp/x_debs Then I had a lot of stuff (i.e., everything: dependencies and the own WM) installed inside $HOME/root. Particularly, xcb-* libraries were installed in $HOME/root/usr/lib and the awesome binary in $HOME/root/usr/bin/awesome. If I try to execute awesome as is I get as an error that libraries could not be loaded. That's normal, as they are not in /usr/lib nor in /lib. So I ran export LD_LIBRARY_PATH=$HOME/root/usr/lib:$HOME/root/lib:${LD_LIBRARY_PATH} and awesome would try to load. However, I could not make gdm to run awesome within gnome or replacing it. I did it this way so I can copy everything in my $HOME/root folder, paste it in the other machine and have it running. Is there any other way (to have less wasted space maybe..) to do this? How can I tell gdm to exec awesome without root access?

  Read the article

• Do I need to install a package (openSWAN or strongSWAN maybe) to use ipsec?

  - by user68886

  I want to connect to a windows share that only accepts ipsec transport mode. I have a list of security policies and a shared secret. I've skimmed through the man page on ipsec.conf on the web and it seems to be the place to put these polices. If ipsec is part of the kernel (and I think it is, I'm using Ubuntu 12.04) do I need to install some other package in order to get this working? I'm guessing it's either openSWAN or strongSWAN but don't know the difference.

  Read the article

• Bastion on ubuntu 12.04 64bit black screen

  - by dm03514

  I just downloaded the Humblebundle with bastion. After installing Bastion and starting it up, only a blank screen shows the the mouse arrow. I can here the sound fine. I read a message board that recommended starting it with -windowed -x 1280 -y 720 which does not work. I am on ubuntu 12.04 64 bit, with a intel 3000 integrated graphics card. Does anyone know how I can get this to work properly? thank you.

  Read the article

• Why Wifi no longer works 12.04.1

  - by Roger

  starting this morning over wifi (Realtek RTL8188CE) on CLEVO W253HU. May be due to the update before yesterday, more pilot managed, but somehow it worked yesterday. If someone has an idea of the problem. Back command lines: cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 006: ID 192f:0416 Avago Technologies, Pte. Bus 002 Device 004: ID 5986:0315 Acer, Inc lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) lspci -nn | grep -i net 02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) 03:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) lspci -k 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: i2c-i801 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device 9196 Kernel modules: rtl8192ce 03:00.0 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jme Kernel modules: jme 03:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel modules: sdhci-pci 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 90) Subsystem: CLEVO/KAPOK Computer Device 4140 Kernel driver in use: jmb38x_ms Kernel modules: jmb38x_ms sudo lshw -C network *-network NON-RÉCLAMÉ description: Network controller produit: RTL8188CE 802.11b/g/n WiFi Adapter fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 version: 01 bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress cap_list configuration: latency=0 ressources: portE/S:e000(taille=256) mémoire:f7d00000-f7d03fff *-network description: Ethernet interface produit: JMC250 PCI Express Gigabit Ethernet Controller fabriquant: JMicron Technology Corp. identifiant matériel: 0 information bus: pci@0000:03:00.0 nom logique: eth0 version: 05 numéro de série: 00:90:f5:c1:c6:45 taille: 100Mbit/s capacité: 1Gbit/s bits: 32 bits horloge: 33MHz fonctionnalités: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=full ip=192.168.1.54 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s ressources: irq:44 mémoire:f7c20000-f7c23fff portE/S:d100(taille=128) portE/S:d000(taille=256) mémoire:f7c10000-f7c1ffff mémoire:f7c00000-f7c0ffff lsmod Module Size Used by btusb 18288 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 11 btusb,rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 binfmt_misc 17540 1 snd_hda_codec_realtek 224173 0 dm_crypt 23125 0 snd_hda_codec_hdmi 32474 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_hda_intel 33773 2 snd_hda_codec 127706 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi jmb38x_ms 17646 0 psmouse 87692 0 serio_raw 13211 0 memstick 16569 1 jmb38x_ms snd_seq_midi_event 14899 1 snd_seq_midi rtl8192ce 84826 0 rtl8192c_common 75767 1 rtl8192ce rtlwifi 111202 1 rtl8192ce snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq mac80211 506816 3 rtl8192ce,rtl8192c_common,rtlwifi mac_hid 13253 0 snd 78855 14 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 205544 2 rtlwifi,mac80211 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid i915 473035 3 drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper jme 41259 0 i2c_algo_bit 13423 1 i915 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci wmi 19256 0 video 19596 1 i915 iwconfig lo no wireless extensions. eth0 no wireless extensions. ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:c1:c6:45 inet adr:192.168.1.54 Bcast:192.168.1.255 Masque:255.255.255.0 adr inet6: fe80::290:f5ff:fec1:c645/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:4513 erreurs:0 :0 overruns:0 frame:0 TX packets:4359 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:3471675 (3.4 MB) Octets transmis:712722 (712.7 KB) Interruption:44 lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 Packets reçus:686 erreurs:0 :0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 Octets reçus:64556 (64.5 KB) Octets transmis:64556 (64.5 KB) sudo iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. uname -r -m 3.2.0-30-generic x86_64 cat /etc/network/interfaces auto lo iface lo inet loopback nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Connexion filaire 1] ------------------------------------------ Type: Wired Driver: jme State: connected Default: yes HW Address: 00:90:F5:C1:C6:45 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.54 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 sudo rfkill listrfkill list 1: hci0: Bluetooth Soft blocked: no Hard blocked: no The absence of line "Kernel driver in use:" the return of lspci-k made ??me think that it is not loaded yet but he seems to be. lsmod | grep rtl8192ce rtl8192ce 137478 0 rtlwifi 118749 1 rtl8192ce mac80211 506816 2 rtl8192ce,rtlwifi I found something disturbing in / var / log / syslog Sep 14 11:40:11 pcroger kernel: [ 64.048783] rtl8192ce-0:rtl92c_init_sw_vars():<0-0> Failed to request firmware! Sep 14 11:40:11 pcroger kernel: [ 64.048795] rtlwifi-0:rtl_pci_probe():<0-0> Can't init_sw_vars. Sep 14 11:40:11 pcroger kernel: [ 64.048835] rtl8192ce 0000:02:00.0: PCI INT A disabled Sep 14 11:40:11 pcroger kernel: [ 64.943345] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen Sep 14 11:40:11 pcroger kernel: [ 64.943358] ata1.00: failed command: READ FPDMA QUEUED Sep 14 11:40:11 pcroger kernel: [ 64.943371] ata1.00: cmd 60/00:00:00:68:6a/04:00:0b:00:00/40 tag 0 ncq 524288 in Sep 14 11:40:11 pcroger kernel: [ 64.943374] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Sep 14 11:40:11 pcroger kernel: [ 64.943381] ata1.00: status: { DRDY } Ubuntu and takes forever to start (2 min).

  Read the article

• How can I remove old kernels/install new ones when /boot is full?

  - by Marcel

  I know this question is asked many times before, however with me it is just a bit different I guess. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 224G 5.2G 208G 3% / udev 1.9G 4.0K 1.9G 1% /dev tmpfs 777M 260K 777M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 0 1.9G 0% /run/shm /dev/sda2 90M 88M 0 100% /boot /dev/sda6 1.9G 514M 1.3G 29% /tmp My boot partition is full. Current Kernel: # uname -r 3.2.0-35-generic All Kernels: # dpkg --list | grep linux-image ii linux-image-3.2.0-32-generic 3.2.0-32.51 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-34-generic 3.2.0-34.53 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-35-generic 3.2.0-35.55 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-37-generic 3.2.0-37.58 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-38-generic 3.2.0-38.60 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iU linux-image-generic 3.2.0.37.45 Generic Linux kernel image So I thought of removing the 3.2.0.32-generic kernel with: # sudo apt-get purge linux-image-3.2.0-32-generic Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.37.45) but 3.2.0.38.46 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). No success. When I try apt-get -f install it also fails: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-34 linux-headers-3.2.0-35 linux-headers-3.2.0-34-generic linux-headers-3.2.0-35-generic Use 'apt-get autoremove' to remove them. The following extra packages will be installed: linux-generic linux-image-generic The following packages will be upgraded: linux-generic linux-image-generic 2 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 5 not fully installed or removed. Need to get 0 B/4,334 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.99ubuntu13.1) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-37-generic (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-38-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic /boot/vmlinuz-3.2.0-37-generic update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-37-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic (--configure): subprocess installed post-installation script returned error exit status 2 Setting up linux-image-3.2.0-38-generic (3.2.0-38.60) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-38-generic /boot/vmlinuz-3.2.0-38-generic update-initramfs: Generating /boot/initrd.img-3.2.0-38-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-38-generic with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-38-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-38-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-37-generic; however: Package linux-image-3.2.0-37-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Package linux-image-generic is not configured yet. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already update-initramfs: Generating /boot/initrd.img-3.2.0-35-generic gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-35-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-37-generic linux-image-3.2.0-38-generic linux-image-generic linux-generic initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) Any help would really be appreciated. Update: I did: sudo rm /boot/*-3.2.0-32-generic /boot/*-3.2.0-34-generic After that the following problem with apt-get -f install: root@localhost:/# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-generic The following packages will be upgraded: linux-generic 1 upgraded, 0 newly installed, 0 to remove and 9 not upgraded. 1 not fully installed or removed. Need to get 0 B/1,722 B of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.37.45); however: Version of linux-image-generic on system is 3.2.0.38.46. linux-generic depends on linux-headers-generic (= 3.2.0.37.45); however: Version of linux-headers-generic on system is 3.2.0.38.46. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: linux-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• fat32 partition lock

  - by gsedej

  Hi! A am asking about problem with USB data stick (that uses fat32 file system). If you unplug USB stick without unmounting (safly remove) data may become locked when you mount USB stick another time (you can't make changes to files). If you unmount and mount partition few times, data becomes normally accessable. Problem is that I can not repeat (force) this problem now. But it has happend many times even recently. Has this been happening to somoeone else?

  Read the article

• Sound muted in milliseconds after unmute

  - by Yash Gupta

  I installed Ubuntu 11.10 recently, and sound doesn't work properly. Whenever I try to play a sound (from any software), the sound is muted, and when I unmute it, it stats there for a fraction of second and mutes itself. After trying various things, I plugged in a headphone in the front microphone jack of my computer, and magecally, the sound started to come out from my speakers (Which are connected to the line-out in the rear panel). I have analog stereo speakers. The sound card (intel HDA as shown in alsamixer) is detected properly. I have ecs G41T-M7 motherboard and nVidia GT240 (with graphics drivers installed)

  Read the article

• No space on device

  - by user170810

  Today I tried to move a huge directory to a common directory for 2 users. I first tried to change the permissions of my home directory. So something happened with my ~/.private directory and the disk was full! I have a 2 TB disk. I cannot make a backup, I cannot even enter graphics mode. Please help. Are there a way to restore my contents without making backup? Even creating ~/Private is impossible -- "no space on the device". I have no Private, and don't tell me that I have erased it, because it is not true. Are there some utilities to restore the files and make them not encrypted?

  Read the article

• DSL connection not working in 10.04

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Sigmatel sound card not working on an Dell XPS m2010

  - by ralph crowhurst

  I've installed Ubuntu 11.4 on my dell xps m2010 using wubi. Then booted up and could not connect to the Internet using 3three huawei e122 usb mobile broadband (I would like this to work also). I've managed to connect through a wireless network, I went to my favorite sites and was told I needed to install adobe flash player.This what I did players run and picture is good. But there is no sound! Then I've tried to play songs in Banshee, but no sound. I have checked everything in sound preferences including test speaker, there is sound. I have sigmatel sound card. Thanks

  Read the article

• Eee PC brighness contol with 12.04 release

  - by Terry

  is there a solution to the low screen brightness issue with the Eee PC and release 12.04? When I use the brightness control, the screen goes through three adjustment cycles of dark to semi bright, but never gets to bright. As you index the control up, brightness increases, then suddenly cuts back to dark. use the brightness button to further increase the brightness and the same cycle happens. As though there are three distinct brightness events, each one setting back to low level. Under no circumstances other than initial boot up can you get to a bright screen. I just finished installing 12.04 on two Acer (Gateway netbooks) with no brightness issue. Just on the Eee PC

  Read the article

• Backtick (Grave accent) button sticking

  - by Scott Lemmon

  I have Ubuntu 12.04 running in a Virtual Box virtual machine, on my Windows 7 32bit system. It has been working great, except that the backtick/tilde button sticks(not physically). When I hit the backtick button it keeps repeating until another input button is pressed. So if I press the spacebar while the backtick is repeating, it stops, but if I press the shift while it is repeating, the backtick turns into a tilde, and the tilde keeps repeating until I release the shift key (at which point it's a backtick again and keeps repeating). This sticking behavior only happens with the backtick key, and only in my Ubuntu virtualization, never in windows. I've tried both my laptop's keyboard and an external USB keyboard and the problem happens on both. Both keyboards I've tried are Japanese 106/109 key layout, but I'm using them with a English(US) 101 profile. When I refer to the backtick key above, I mean where it is on the US layout. If I use the Japanese profile, the key in that location (the US backtick location) still sticks, but its no longer mapped as the backtick key. Any thoughts as to what might be causing this and possible solutions? I've searched a lot, but have not found any help so far. Any help is greatly appreciated.

  Read the article

• Black screen while booting, after installing installing AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver on HP pavilion dm4

  - by Megharaj

  HP Pavilion dm4 with configuration as shown below cpu intel Core i5 2.26 GHz RAM 4.0 GB Graphics processor 512MB ATI Mobility Radeon(TM) HD 5450 switchable graphics [HDMI, VGA]. I installed ubuntu 10.04 ( without AMD graphics driver) it was working fine, but when I installed AMD graphics drivers AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, than the problem started from then When I boot I was get black screen. Than I thought to upgrade from ubuntu 10.04 to 12.04 using the bootable pen drive but was getting black screen than read on some forums that was because of the switchable graphics, than upgraded ubuntu 12.04 by setting to "nomodeset". It was working, again thought to install graphics driver AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver, again after installing this, when I boot I am getting blank scree . Can anyone help me to inatall ubuntu 12.04 along with AMD Catalyst™ 12.8 Proprietary Linux x86 Display Driver. Any help is highly appreciated.

  Read the article

• Synaptics error "no touchpad found" at startup on HP laptop

  - by Sandra

  I know there are a lot of topics on the synaptics touchpad not working, but I can't seem to find the answer to my problem anywhere. Please forgive me if I missed it. Here is what happened. After using the "ambient light" F11 key on my HP laptop (Compaq nc8430), the touchpad was disabled and I couldn't get it to work. Then I found this thread : "Synaptic touchpad on laptop not working". And Salem's answer totally solved my problem, both for the session fix and for the permanent fix. But since then, after each reboot I get the same error pop-up, with the following content: No touchpad found. No touchpad was found in this system. If the system has a touchpad, please make sure that the synaptics driver is properly installed and configured. If your touchpad is not found, though the driver is installed and configured correctly, please compile detailed information about your touchpad hardware and report this issue to the issue tracker. Needless to say, the driver is indeed installed, activated and configured (even though it's kind of useless now, since I guess the .conf file I created is doing all the work). I know it's a minor issue, because the touchpad does work properly, but it's getting really annoying... So, could anyone please help me fix this error pop-up problem ? Thank you !

  Read the article

• Gray "apply" button in NetworkManager openvpn connection window

  - by user20627

  I installed all the necessary packages for the networkmanager-openvpn function to function. The openvpn-connection-setting are successfully imported into the networkmanger via the conf file but the apply button is grayed out, so that actually saving and using the connection isn't possible? Does anyone know, where the problem is? It's a fresh install of Ubuntu 10.10 after the upgrade from 10.04 sent the networkmanger down the drain. I was told the following: Sounds like a policy issue. read this thread: http://ubuntuforums.org/showthread.php?t=1616355 look carefully in the file mentioned, at the element. What is there ? "No" will cause the action detailed to be unavailable. Ideally "yes" or "auth_admin_keep" should be there. They will either allow all access, or prompt for a admin password. The above does not seem to work for me - It still has a gray apply button. If I choose a file for User certificate as well as CA Certificate "which is all openvpn supplies and needs" and a key file it will allow me to click apply - but obviously wont connect. :l I am at a lost end.

  Read the article

• Best partition Scheme for Ubuntu Server

  - by K.K Patel

  I am going to deploy Ubuntu server having Following servers on it Bind server, dhcp server, LAMP Server, Openssh Server, Ldap server, Monodb database, FTP server,mail server, Samba server, NFS server , in future I want to set Openstack for PAAS. Currently I have Raid 5 with 10TB. How should I make my Partition Scheme So never get problem in future and easily expand Storage size. Suggest me such a partition Scheme with giving specific percentage of Storage to partitions like /, /boot, /var, /etc. Thanks In advance

  Read the article

• How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

  - by Alexander Tritan

  I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

  Read the article

• Build a custom Ubuntu based distribution

  - by user51447

  I am working on making a custom Ubuntu 11.10 based distro.(64 bit) I am adding non open source packages, replacing packages, changed user interface from Unity to GNOME, and more changes. My system is ready, and I want to create a redistributable image for my distro. When you go to system settings - system info, you see a logo with the Ubuntu name and logo, but I want to change it to the name and logo of my distro. Also, in the boot menu, I want to change the boot entry names, and the GRUB background. And I want to change the name Ubuntu from every possible location. Also, I will be sharing it with people, so I want to make my own software repositories, like linux mint has, or any other distro has, I will purchase server space for that. Also, the I want to customize the wubi installer like linux mint did and if some uses the customized tool to install my distro from Windows, they should see the name of my distro in add or remove programs page. Any help will be appreciated!

  Read the article

• Running CRON job on Ubuntu server for SugarCRM

  - by Logik

  I am pretty inexperienced in Linux, so be descriptive on your answer. My environment: Local Linux server 12.04 hosting Sugar CRM 6.5.2. There is area in sugar CRM called scheduler. I can configured some predefined jobs here. in my case i am trying to run email reminders (ever min/hour/day/month). For this scheduler to be effective, i read some where i need to setup CRON job. So I did some research & finally put following lines in CRONTAB for the root user, as per instructions given in sugarCRM. * * * * * cd /var/www/crm; php -f cron.php > /dev/null 2>&1 Well I am creating contracts in my sugarCRM (AOS module) & I want email reminders to be sent for these contracts to the concern person. Now my sugarCRM email is configured correctly & I can send test emails using it. But the CRON + scheduler not giving any result. I can't receive any emails. Then I tried to read /var/log/syslog & it is showing entry for following line each minute. Oct 27 15:03:01 unicomm CRON[28182]: (root) CMD (cd /var/www/crm; php -f cron.php /dev/null 2&1) I've few questions: what does the CRON job line i've added in crontab mean? cd /var/www/crm; php -f cron.php > /dev/null 2>&1 is not making any sense to me. How am i suppose to get this thing work? I've searched a lot (including SugarCRM forum), but no luck.

  Read the article

• How to setup IPSec with Amazon EC2

  - by bonzi

  How to setup an IPSec connection from my ubuntu laptop to Amazon EC2 instance? I tried setting it up using elastic IP and VPC with the following openswan configuration but it is not working. conn host-to-host left=%defaultroute leftsubnet=EC2PRIVATEIP/32 # Local netmask leftid=ELASTICIP leftrsasigkey= connaddrfamily=ipv4 right=1laptopip # Remote IP address rightid=laptopip rightrsasigkey= ike=aes128 # IKE algorithms (AES cipher) esp=aes128 # ESP algorithns (AES cipher) auto=add pfs=yes forceencaps=yes type=tunnel

  Read the article

• Ubuntu 12.10 64 bits not booting on a Dell Inspiron 15z Puissance (French) in UEFI mode

  - by NicoGuich

  When trying to start Ubuntu from my USB key in UEFI mode (it works in Legacy mode, but I have to keep Windows) on a Dell Inspiron 15z , Grub starts, but when I choose any option, I get a black screen and my USB key stop teling me it is being read. EDIT: when using the legacy mode and trying to install Ubuntu, I get a blank partition table with Ubiquity… … and a very strange partition table from GParted (I have a hybrid 32Go SSD + 500Go HDD disk) :

  Read the article

• TypeError: Cannot call method 'hasOwnProperty' of null, while creating a QMLscene window

  - by tomoqv

  I am trying to make a simple Ubuntu Touch web application with Qt Creator. I have set up a new project according to the tutorial and committed the files to Bazaar. I have set a url instead of the default index.htm in the qml file of the project. Using build-run loads a QML Scene window with the desired webpage, but Qt Creator yields the following output: Starting /usr/lib/i386-linux-gnu/qt5/bin/qmlscene -I /home/tomas/ubuntu-sdk/SL-planner -I /usr/bin -I /usr/lib/i386-linux-gnu/qt5/qml /home/tomas/ubuntu-sdk/SL-planner/SL-planner.qml unity::action::ActionManager::ActionManager(QObject*): Could not determine application identifier. HUD will not work properly. Provide your application identifier in $APP_ID environment variable. file:///usr/lib/i386-linux-gnu/qt5/qml/Ubuntu/Components/MainView.qml:257: TypeError: Cannot call method 'hasOwnProperty' of null My SL-planner.qml looks like this: import QtQuick 2.0 import Ubuntu.Components 0.1 import QtWebKit 3.0 /*! \brief MainView with a Flickable WebView. */ MainView { // objectName for functional testing purposes (autopilot-qt5) objectName: "mainView" // Note! applicationName needs to match the "name" field of the click manifest applicationName: "com.ubuntu.developer.tomoqv.SL-planner" /* This property enables the application to change orientation when the device is rotated. The default is false. */ automaticOrientation: true width: units.gu(100) height: units.gu(75) Flickable { id: webViewFlickable anchors.fill: parent WebView { id: webView anchors.fill: parent url: "http://mobil.sl.se" } } } What am I missing?

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >