Search Results

Search found 44691 results on 1788 pages for 'first'.

Page 163/1788 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Boot loop that I cannot bypass

  - by lonewaft

  Recently, on a laptop that I've used for a while, I had a strange issue where OS files were corrupted (device manager) and Windows 8 was hung after the login screen, so I reinstalled Windows 7 over the existing Windows 8 installation, and it worked for a couple days. Today, when I tried to use my laptop, it was stuck on a boot loop. Right after the BIOS screen, it would show a flashing underscore, then restart the computer, again and again until I removed the battery. I tried booting to a windows 7 install CD, but the same flashing underscore - reboot sequence happened when I tried. I tried moving the boot priority around (HDD first, CD/DVD first, even USB first) but nothing changed. After about an hour of tinkering with it, I listened to the HDD sounds, and it sounded like the HDD was trying to spin up, but failing (whining noise increasing in frequency that stopped and started in sync with the system restarting). I am planning to replace the HDD, but I'm still confused as to why a faulty HDD would stop the laptop from booting to my install DVD (tried it on a different computer, it booted from that CD fine). Anybody here have any idea why this might be happening?

  Read the article

• How to tackle dell support system? [closed]

  - by Nishant Kumar

  We have purchased a Dell Optiplex 9010 SSFV for our organization's work. Since the first installation two of the USB keyboard keys were not working properly. I had to press those keys two times simultaneously, on first time keys did not work and for for second time it printed two characters (as it were buffering first character.) Two keys that were not working properly: Hexangrave (Below the ESC key: `) Double Quotes (Left the enter key ") We registered our complaint with DELL and they suggested (with some hard to understand and weird ENGLISH accent) some test and tricks, such as switching to different ports, checking keyboard on different PC, and it worked well with diff. PC(with Windows 7 Home Premium installed). It was clear that it is an OS fault, hence they suggested to re-install OS. Problem began here, we have a project on the run and currently a video editing project setup on our system, so can't re-install system in hurry and also DELL persons were not providing any other solution such as updating keyboard driver, etc. Arguments I am a Software Engg. and don't think it is a feasible solution to re-install entire system for simple problems. This prob is coming since the fresh system installation, so I don't think it will solve the problem. Finally, I had to find solution myself and got it here, now I want to show my disappointment to dell persons or at least tell them that they should improve there support system to not advice to re-install entire system for that simple problems. Notes We have purchased 5 years NEXT business day support from DELL for around 8000 INR (Not for that kind of solutions from DELL). So can anyone tell me how to tackle dell support system officially, so that they will pay more attention in near future. Thanks

  Read the article

• is it worth to use load balancer on web server/website

  - by user427969

  I have a website and a while ago, the web server of the company hosting my website was down for about a day. I consulted the company for a solution on how i can stop this from happening in future and they suggested to have a second machine and which will be connected to my current website/web server by a "load balancer" (at an additional huge cost!!!). The second machine will be replicate of the first one and so if i goes down, the other will always be running. ---- Explanation ----- My hosting company suggested that it will be a good idea to have a second machine running at the same time and both the machines will be connected by a load balancer which reduces the rist of a downtime. The second machine will be a mirror of the first and any changes to first must be replicated in the second. I don't mind spending money if it really saves my website from going down. I want to know is it worth having this "load balancer" for my purpose? My website is a 24/7 service. I cannot afford an outage of 24 hours/1 hour. I don't mind using this "load balancer" as far as it is really worth. I am not sure if its just a marketing trick of my hosting company or really a "best" solution Thanks for help. Regards

  Read the article

• How to add URL's to wiki (MediaWiki) powered documentation?

  - by Ian Boyd

  We have an internal company wiki. The wiki engine being used is MediaWiki, the wiki engine that runs Wikipedia. Some of it contains IT stuff. One of the things i want want to have are hyperlinks to the various virtual machines. An example of a command, as it needs to run, is: vmrc://solo.avatopia.com:5901/Windows 2000 Server My first thought was to convert the URL into a link: [vmrc://solo.avatopia.com:5901/Windows 2000 Server] But the content renders literally as above: with the square brackets and all. Testing with other URL protocols: [http://solo.avatopia.com] [ftp://solo.avatopia.com] [ldap://solo.avatopia.com] [vmrc://solo.avatopia.com] Only the first two work, and are converted to hyperlinks. The other two remain as liternal text. How can i add URLs to MediaWiki powered documentation? Original Question We have an internal company wiki. The wiki engine being used is MediaWiki, the wiki engine that runs Wikipedia. Some of it contains IT stuff. One of the things i want want to have are hyperlinks to the various virtual machines. An example of a command, as it needs to run, is: \\solo\VMRC Client\vmrc.exe solo.avatopia.com:5901/Windows 2000 Server If launching from a command prompt, you have to quote the spaces: C:\>"\\solo\VMRC Client\vmrc.exe" solo.avatopia.com:5901/"Windows 2000 Server" My first thought in converting the above for use on our wiki-site, is to simply HTML-ify it: file://\\solo\VMRC Client\vmrc.exe solo.avatopia.com:5901/&quot;Windows 2000 Server&quot; but MediaWiki only converts file://\solo\VMRC to a hyperlink, the remainder is text. i've tried other random things, including enclosing the URL in square brackets. What is the correct answer? i don't want to happen to randomly stumble on some format that happens to work today, and breaks in the future.

  Read the article

• Static file serving only works if root is a subfolder under public

  - by lulalala

  I am trying to serve static cache files using nginx. There are index.html files under the rails_root/public/cache directory. I tried the following configuration first, which doesn't work: root <%= current_path %>/public; # $uri always contains one slash(the first slash but not the last) try_files /cache$uri/index.html /cache$uri.html @rails; This give error: [error] 4056#0: *13503414 directory index of "(...)current/public/" is forbidden, request: "GET / HTTP/1.1" I then tried root <%= current_path %>/public/cache; # $uri always contains one slash(the first slash but not the last) try_files $uri/index.html $uri.html @rails; And to my surprise this works. Why is it that I can do the latter not the former( since they point to the same location) The permissions of the folders are: 775 public 755 cache 644 index.html The thing is that my favicon sitting under public/ is served correctly: # asset server server { listen 80; server_name assets.<%= server_name %>; expires max; add_header Cache-Control public; charset utf-8; root <%= current_path %>/public; }

  Read the article

• emacs, writing custom commands which use term-mode

  - by valya

  Hello, I'm using Emacs and M-x term for a terminal. Since my typical workflow looks like this: edit some code C-x C-o to the terminal buffer (or C-x b term[Enter] or something) press Up key to use the last command press Enter to run it C-x C-o to go back I want to bind all of these (except the first step... maybe) to one command, I believe Emacs is awesome enough to do that :-) So, a command must: go to the buffer with terminal (maybe it shouldn't change any windows at all, maybe it should split the window vertially (if it weren't split already) and use the right sid) run a last command what've been run there go back to the last buffer/part of the screen Thank you! I'm not really used to the Emacs scripting system, and I hope someone will help me and someone else will be able to use the answer to improve his workflow, since I believe this is a pretty common one Examples of commands: python manage.py test python manage.py test stats python solve.py # for project-euler puzzles :-) the first and the second runs over a ssh (in a terminal) sometimes (I like developing with vagrant) I understand that it's easy to bind the first and the third ones, but the second changes too often - I'd just like to "run last command"

  Read the article

• Nginx try_files or else continue matching against locations?

  - by Yang

  I'm wondering whether this is possible with Nginx: I just added a directory with a bunch of HTML files (foo.html, bar.html) that I'd like to serve with /foo, /bar, etc. If the URL doesn't match up with a file name I'd like to fall back to whatever the next best matching location would be. So I have: # This block is newly added. location ~ ^/([^/]+)$ { default_type text/html; alias /blah/$1.html; } # Our long list of existing subsystems below.... location /subscribe { proxy_pass http://127.0.0.1:5000; } location /upload { proxy_pass http://127.0.0.1:8090; proxy_read_timeout 99999; } location ~ /(data|garbage|blargh).* { proxy_pass http://127.0.0.1:8090; proxy_read_timeout 99999; auth_basic text; auth_basic_user_file /etc/nginx/htpasswd; } .... The problem is that the first regex now eats up the URLs that would've gone to other locations, as per the documented behavior of location. One approach is to maintain the full explicit list of files in the first location block, but this list is quite large and is always changing. Is there a way to check to see if the file exists first, and if not, then continue with what would've been the next-best location match? I took stabs using try_files (including using a @fallback and nesting locations in there) but I don't think it's capable of doing this. However I thought I'd ask here in case I'm missing something. (Or maybe there's another better approach altogether.)

  Read the article

• squid will not listen on specific IP

  - by Chris

  I have a public subnet with squid installed. Let's say my subnet is from 1.2.3.2 to 1.2.4.254. When I set the following: http_port 50000 http_port 1.2.3.2:50000 it is working. But when I set: http_port 1.2.4.37:50000 it is not working. It is only working with my first public IP from my subnet. The error I get when it is not working is the following: commBind: Cannot bind socket FD 10 to 1.2.4.37:50000: (99) Cannot assign requested address What is wrong with my configuration? @Zoredache I have a dedicated server and the whole subnet is defined as IP Range. When I use only the port or the first IP and doing netstat -ntlp | grep 46555 I get the following: tcp 0 0 0.0.0.0:50000 0.0.0.0:* LISTEN 25532/(squid ) When I use my specific IP, then the netstat query will show nothing, as the server does not start. I don't want squid to listen on all or the first IP, it is just a specific one it should listen to.

  Read the article

• Unknown user in terminal

  - by Giles B

  Im having a strange problem with the terminal in OS X. When I open the terminal the username at the command prompt is: unknown-04-0c-ce-e3-0d-c2: ~ I can't pinpoint when this first started or why unfortunately. I usually use iTerm for web development purposes but this also occurs in the normal OS X Terminal app. Any ideas/help would be really appreciated. Thanks Update: Thanks to @fayadfami and @aliasgar for the correct answers and steering me in the right direction. Also this forum post helped http://forums.macrumors.com/showthread.php?t=152407 The extract from the right post: Having run into the exact same issue myself, and having come across this thread while attempting to figure it out, I thought I'd post the answer. OS X is initially setting your hostname to what's set for your Computer Name in Sharing; however, if you're set up for DHCP and you match a current lease on your DHCP server (i.e., match the IP address of another recent user), OS X will then set your hostname to whatever the DHCP server currently has for that lease. This freaked me out incredibly at first, as I had just reformatted (having just purchased my first Mac and wanting to see how the installer worked) and knew I had not yet changed the Computer Name in Sharing -- yet my system hostname at the Terminal prompt was indeed changed to what I had previously set, pre-format. I grepped around, not finding the name anywhere save log entries; I thought either the format didn't actually properly wipe everything, or I was losing my mind. Finally I logged into my router (it's a Linksys WRT54GS running OpenWRT), and found the hostname in the current leases file. I then manually set my Mac's IP to something different, and volia! -- the hostname was back to what I expected. I hope this helps save someone from the same paranoia I went through.

  Read the article

• Outlook 2007/2010 autodiscovering old Exchange info

  - by Dan

  I currently have an Exchange setup as follows: two Exchange 2003 servers clustered together set up as the current mailbox stores, one Exchange 2003 setup as a frontend, one Exchange 2007 set up as a frontend (was set up for testing by my predecessor, never really used intentionally), and now four Exchange 2010 servers - two mailboxes in a DAG and two with Hub/CAS. Everything seems to be working fine with one exception - Outlook 2007/2010 clients are still autodiscovering the test 2007 frontend and not the 2010 CAS array. I know this because there's an expired cert on the 2007 box so the client displays a cert error when you attempt to autocreate the outlook profile. From what I've read, there is an SCP (Service Connection Point) in AD that is pointing to the old server and it is getting returned first, causing Outlook to try it first. How can I prevent Outlook from even attempting to connect to this 2007 box from now on? http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html When Outlook 2007 is installed on a domain joined workstation then the Outlook client will query Active Directory for the Autodiscover information. Active Directory will return a list of SCP’s and the Outlook client will automatically select the first SCP in this list. Using the information found in the SCP the Outlook client will contact the Client Access Server for its configuration information and the Outlook client will be configured automatically.

  Read the article

• install Win7 SP1 with bcdedit failing

  - by Albert

  I'm getting the error 0x800F0A12 which is described here. bcdedit says: C:\>bcdedit.exe Der Speicher für die Startkonfigurationsdaten konnte nicht geöffnet werden. Das System kann die angegebene Datei nicht finden. (English: Couldn't open the start configuration. Couldn't find the file.) (off topic: how can I get those messages in English?) I played around and I assume that is because the system partition C:\ is not on the first BIOS disk. There are 4 disks in my PC. On one of them (shown as the 4th in Windows drive manager) contains Windows, whereby the system-reserved NTFS partition is the first primary and the second primary is my main Windows system partition. A few more partitions follow with other (non-NTFS) stuff. I was able to set the first two disks offline (via the Windows drive manager). For the 3rd disk, it says that it cannot set the BIOS 0 disk offline. How can I ignore that and still install SP1? I don't want to rewire/resetup my disks.

  Read the article

• Network bridge does not work on Windows 7

  - by D. Strout

  I am trying to use Windows 7 to bridge my wireless and wired connections together to get wireless on a second Windows XP computer (fresh install). The network bridge is created successfully, but when I connect the cable from the first computer with the bridged connections to the second one with just a wired connection, nothing happens. The second computer doesn't connect, and the first computer shows no sign of anything different. I tried bridging the connections of a third computer, and connecting this computer to the second computer. This worked (third computer bridged the wireless to the second computer). Thus, the problem must be with the first (Win 7) computer. However, I have no idea what the problem could be. All Internet Connection Sharing is turned off. Homegroup is disabled (it was originally enabled, I thought that might be a problem, so I disabled it). Also, I had VMWare fusion installed, and that created extra items in the "This connection uses the following items" box in the properties dialog. Thinking this might be causing issues, I uninstalled that too. Still, with everything I tried, I can't get it to work. Any suggestions? Edit: Another thing I noticed that might be worth mentioning: The network icon in the Win7 taskbar has a red X on it that means it's not connected, but when I click the icon, it says connected next to my wireless connection, and I am able to access the internet.

  Read the article

• Reduce power consumption of gaming computer while idle

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 clocked @ 3.3 Ghz 3x DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 oc'd at 800/1600/1850 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) I've already seen this post Reduce power use on computer and this post How do I lower power consumption of my computer and while useful, I'm looking for answers specific to my build and OS. I'm pretty sure this build is a energy-intensive build by default, but I want to try to reduce the amount of energy my build uses when I leave it idle (when I go to bed or go out, etc). The first requirement for this machine is that I need to leave it on, so I cannot turn it off while it's being unused. I run it as a file server for personal reasons and I also leave it on in case people leave me messages on various IM services and chat clients (IRC, MSN, Steam, XFire, Pidgin, etc). I'm also unable to replace the parts in my computer with a cheaper "greener" part. What are some ways to minimize the amount of power the machine uses? I'm already using a high efficiency power supply (80 Plus Gold), but I imagine there's other things that can be done in the BIOS and Windows' power settings to reduce power usage while I'm not using the computer. From what I can tell, I can't use Sleep since that'll disable network access (whole reason why I leave the computer on in the first place). I already turn off my monitor when it's not in use. I enabled Intel SpeedStep within the BIOS (I know, I have a 965 and why am I enabling SpeedStep?) Should I bring the graphics card back to stock speeds and lower the clock on the processor even more? Main reason why I'm asking is I think this computer alone is the reason why my power bill is high, so I want to reduce its consumption to as low as possible without having to shut the thing down.

  Read the article

• How should I monitor memory usage/performance in SunOS/Solaris?

  - by exhuma

  Last week we decided to add some SunOS (uname -a = SunOS bbs-sam-belair 5.10 Generic_127128-11 i86pc i386 i86pc) machines into our running munin instance. First off, the machines are pre-configured appliances, so, I want to avoid touching the system too much without supervision of the service provider. But adding it to munin was fairly easy by writing a small socket-service (if anyone is interested, I put it up on github: https://github.com/munin-monitoring/contrib/tree/master/tools/pypmmn) Yesterday, I implemented/adapted the required plugins for our machines. And here the questions start: First, I have not found a way to determine detailed memory usage values. I get the total memory by running prtconf | grep Memory, and the free memory using vmstat. Fiddling together a munin-plugin, gives me the following graph: This is pretty much uninformative. Compare this to the default plugin for linux nodes which has a lot more detail: Most importantly, this shows me how much memory is actually used by applications. So, first question: Is it possible to get detailed memory information on SunOS with the default system tools (i.e. not using top)? Onto the next puzzle: Seeing the graphs, I noticed activity in the "Paging in/out" graphs, even though the memory graph still has unused memory: Upon further investigation, I found out that df reports that /tmp is mounted on swap. Drilling around on the web, I understood that df will display swap, but in fact, it's mounted as a tmpfs. Now I don't know if this explains the swap activity. The default munin-plugin for solaris uses kstat -p -c misc -m cpu_stat to get these values. I find it already strange that this is using the cpu_stat module. So maybe I simply misinterpret the "paging" graphs? Second question: Do the paging graphs indicate that parts of the memory are paged to disk? Or is the activity caused by file operations in /tmp?

  Read the article

• nginx 2 symfony2 web application, one ip no domain

  - by Krzysztof Koch

  I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

  Read the article

• hard drive recognized by bios but not by windows

  - by tehgeekmeister

  I'm adding a new hard drive (A seagate ST31000340NS; I had links in here but I don't have enough reputation to post them. Interestingly, the bios recognizes it as a ST31000340AS, but it was bought as the other number...) to a friend's hp pavilion d4650e (mobo specs; google the model if you want the rest of the info, can't do more than one link.). Have had a hell of a time with it. Finally figured out that the hard drive needed a jumper set to limit the speed to 1.5gbps so the mobo would recognize it, and the bios DOES recognize it now. But not windows (using windows 7), using add new hardware or diskmgmt.msc. According to my friend, who was at the computer when it first booted after adding the jumper, a new hardware found dealio popped up saying something about raid, but I can't provide more info then that since I didn't see it. Ubuntu livecd recognized the drive before we changed the jumper. Haven't checked since then. XP didn't recognize it, that's the OS we started with. Upgraded to 7 hoping it might fix the problem. The only other info I can think of that might be immediately relevant is that the drive is plugged into the fifth sata channel, and the first channel is empty. Is this a problem? I assume not, because the two other drives (in a raid 0) and the cd and dvd drives are also on channels past the first one, and are recognized. Ask questions and I'll update with info!

  Read the article

• Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

  - by aki

  Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

  Read the article

• publickey authentication only works with existing ssh session

  - by aaron

  publickey authentication only works for me if I've already got one ssh session open. I am trying to log into a host running Ubuntu 10.10 desktop with publickey authentication, and it fails when I first log in: [me@my-laptop:~]$ ssh -vv host ... debug1: Next authentication method: publickey debug1: Offering public key: /Users/me/.ssh/id_rsa ... debug2: we did not send a packet, disable method debug1: Next authentication method: password me@hosts's password: And the /var/log/auth.log output: Jan 16 09:57:11 host sshd[1957]: reverse mapping checking getaddrinfo for cpe-70-114-155-20.austin.res.rr.com [70.114.155.20] failed - POSSIBLE BREAK-IN ATTEMPT! Jan 16 09:57:13 host sshd[1957]: pam_sm_authenticate: Called Jan 16 09:57:13 host sshd[1957]: pam_sm_authenticate: username = [astacy] Jan 16 09:57:13 host sshd[1959]: Passphrase file wrapped Jan 16 09:57:15 host sshd[1959]: Error attempting to add filename encryption key to user session keyring; rc = [1] Jan 16 09:57:15 host sshd[1957]: Accepted password for astacy from 70.114.155.20 port 42481 ssh2 Jan 16 09:57:15 host sshd[1957]: pam_unix(sshd:session): session opened for user astacy by (uid=0) Jan 16 09:57:20 host sudo: astacy : TTY=pts/0 ; PWD=/home/astacy ; USER=root ; COMMAND=/usr/bin/tail -f /var/log/auth.log The strange thing is that once I've got this first login session, I run the exact same ssh command, and publickey authentication works: [me@my-laptop:~]$ ssh -vv host ... debug1: Server accepts key: pkalg ssh-rsa blen 277 ... [me@host:~]$ And the /var/log/auth.log output is: Jan 16 09:59:11 host sshd[2061]: reverse mapping checking getaddrinfo for cpe-70-114-155-20.austin.res.rr.com [70.114.155.20] failed - POSSIBLE BREAK-IN ATTEMPT! Jan 16 09:59:11 host sshd[2061]: Accepted publickey for astacy from 70.114.155.20 port 39982 ssh2 Jan 16 09:59:11 host sshd[2061]: pam_unix(sshd:session): session opened for user astacy by (uid=0) What do I need to do to make publickey authentication work on the first login? NOTE: When I installed Ubuntu 10.10, I checked the 'encrypt home folder' option. I'm wondering if this has something to do with the log message "Error attempting to add filename encryption key to user session keyring"

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• PC freezes after repeated clicking noises

  - by Péter Török

  I have an oldish PC (Athlon XP 2200, WinXP). Every time I switch it on, I hear a loud "click" first of all, and when it is shut down, again a click is the last sound I hear. Lately it started to behave erratically: it started to click loudly in the middle of a session. First only once in a while, then repeatedly for several seconds in a row, and finally it froze completely. We were not doing anything particular during these times, usually just browsing the web. This has already happened twice in a few week's time period. We typically use it only in the evenings, so when the freeze happened, I just decided it is time for the bed. When it was started up the next day, everything looked fine. Any hints on what could be the culprit? Could it be caused by an ageing heat fan, or dust that has accumulated inside the case? We are backing up all the data stored on it, and then will open the case to look inside, but I thought it would be good to get some background info first of all.

  Read the article

• Server unreachable without www

  - by deamon

  My server is unreachable without "www." prefix, even when trying it with ping. The DNS entry looks like this: $TTL 86400 @ IN SOA ns1.first-ns.de. postmaster.robot.first-ns.de. ( 2011010600 ; serial 14400 ; refresh 1800 ; retry 604800 ; expire 86400 ) ; minimum @ IN NS robotns3.second-ns.com. @ IN NS robotns2.second-ns.de. @ IN NS ns1.first-ns.de. @ IN A 1.2.3.4 localhost IN A 127.0.0.1 mail IN A 1.2.3.4 www IN A 1.2.3.4 ftp IN CNAME www imap IN CNAME www loopback IN CNAME localhost pop IN CNAME www relay IN CNAME www smtp IN CNAME www @ A DNS record of the same type for another domain on the same server is working with and without "www". And the VirualHost config looks like this: <VirtualHost *:80> ServerName somewhere.com ServerAlias www.somewhere.com ServerSignature Off ... </VirtualHost> Any idea what could be wrong?

  Read the article

• apache using mod_auth_kerb always asks for the password twice

  - by DrStalker

  (Debian Squeeze) I'm trying to set apache up to use Kerberos authentication to allow AD users to log in. It is working, but prompts the user twice for a username and password, with the first time being ignored (no matter what is put it in.) Only the second prompt includes the AuthName string from the config (i.e.: the first windows is a generic username/password one, the second includes the title "Kerberos Login") I'm not worried about integrated windows authentication working at this stage, I just want users to be able to login with their AD account so we don't need to set up a second repository of user accounts. How do I fix this to eliminate that first useless prompt? The directives in the apache2.conf file: <Directory /var/www/kerberos> AuthType Kerberos AuthName "Kerberos Login" KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms ONEVUE.COM.AU.LOCAL Krb5KeyTab /etc/krb5.keytab KrbServiceName HTTP/[email protected] require valid-user </Directory> krb5.conf: [libdefaults] default_realm = ONEVUE.COM.AU.LOCAL [realms] ONEVUE.COM.AU.LOCAL = { kdc = SYD01PWDC01.ONEVUE.COM.AU.LOCAL master_kdc = SYD01PWDC01.ONEVUE.COM.AU.LOCAL admin_server = SYD01PWDC01.ONEVUE.COM.AU.LOCAL default_domain = ONEVUE.COM.AU.LOCAL } [login] krb4_convert = true krb4_get_tickets = false The access log when accessing the secured directory (note the two seperate 401's) 192.168.10.115 - - [24/Aug/2012:15:52:01 +1000] "GET /kerberos/ HTTP/1.1" 401 710 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" 192.168.10.115 - - [24/Aug/2012:15:52:06 +1000] "GET /kerberos/ HTTP/1.1" 401 680 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" 192.168.10.115 - [email protected] [24/Aug/2012:15:52:10 +1000] "GET /kerberos/ HTTP/1.1" 200 375 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" And one line in error.log [Fri Aug 24 15:52:06 2012] [error] [client 192.168.0.115] gss_accept_sec_context(2) failed: An unsupported mechanism was requested (, Unknown error)

  Read the article

• How should I set up protection for the database against sql injection when all the php scripts are flawed?

  - by Tchalvak

  I've inherited a php web app that is very insecure, with a history of sql injection. I can't fix the scripts immediately, I rather need them to be running to have the website running, and there are too many php scripts to deal with from the php end first. I do, however, have full control over the server and the software on the server, including full control over the mysql database and it's users. Let's estimate it at something like 300 scripts overall, 40 semi-private scripts, and 20 private/secure scripts. So my question is how best to go about securing the data, with the implicit assumption that sql injection from the php side (e.g. somewhere in that list of 300 scripts) is inevitable? My first-draft plan is to create multiple tiers of different permissioned users in the mysql database. In this way I can secure the data & scripts in most need of securing first ("private/secure" category), then the second tier of database tables & scripts ("semi-private"), and finally deal with the security of the rest of the php app overall (with the result of finally securing the database tables that essentially deal with "public" information, e.g. stuff that even just viewing the homepage requires). So, 3 database users (public, semi-private, and secure), with a different user connecting for each of three different groups of scripts (the secure scripts, the semi-private scripts, and the public scripts). In this way, I can prevent all access to "secure" from "public" or from "semi-private", and to "semi-private" from "public". Are there other alternatives that I should look into? If a tiered access system is the way to go, what approaches are best?

  Read the article

• How to figure out what VirtualBox did?

  - by AndrejaKo

  I'm trying to boot a custom made-in-ASM OS on my recent laptop. The OS is intended to be installed on a floppy and during make creates a bootable floppy. Since I don't have a floppy drive, I installed it on a virtual floppy. After that I used WinToFlash's create bootable MS-DOS USB drive option to transfer the floppy image to an USB flash drive. Then I tried to boot my computer from it but got only a repeating broken string on screen. After all that I made a virtual hard disk image form the flash drive using this tutorial and tried to boot a virtual machine from it. First time I got same problem as on real computer. I then used the reset option and next time and every time after that OS booted correctly. My question is: How do I figure out what exactly happened to the virtual machine between first and second boot? UPDATE I just created a new VM with default settings for windows XP and it has the same problem that I have on a real computer. I was unable to reproduce the procedure which made the first VM work correctly.

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >