Search Results

Search found 5123 results on 205 pages for 'functional dependencies'.

Page 163/205 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• broken upgrade from 10.04 to 12.04 on a VPS - recoverable?

  - by HorusKol

  I have a VPS hosted 1500 km away. It originally came with 9.10 - and this morning I decided that I really should get to an LTS release, and figured I'd jump to 12.04. Researching, I discovered that there is no direct path between 9.10 and 12.04, but that I could upgrade via 10.04. After backing up my data, I dove in. The upgrade to 10.04 was successful, and I proceeded to upgrade to 12.04. Things started to go wrong. First, I got an error with GLIBC - I retried and got the same error. That's when I stopped the upgrade. I then tried another round of apt-get update && apt-get upgrade and got a list of "unmet dependencies": apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed I tried to see if I could do something about these - using apt-get -f install. This told me that I would need to upgrade my kernel. I found instructions on how to do this, but when I ran apt-get to install the new linux headers, I got the same dependency errors. I found another answer here where someone else had had an interruption in their upgrade - and tried the solution that worked for them: sudo apt-get -f dist-upgrade This resulted in the error: E: Could not perform immediate configuration on 'python2.7-minimal'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) I tried to resolve this by: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal But this simply ended up with this last list of dependency errors: apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed python: Depends: python-minimal (= 2.6.5-0ubuntu1) but 2.7.3-0ubuntu2 is to be installed python-apt: Depends: libapt-pkg-libc6.10-6-4.8 python-minimal: Depends: python2.7-minimal (>= 2.7.3) but it is not going to be installed Breaks: python-support (< 1.0.10ubuntu2) but 1.0.4ubuntu1 is to be installed synaptic: Depends: libapt-pkg-libc6.10-6-4.8 Any ideas on how to dig out of this hole?

  Read the article

• ARTS Reference Model for Retail

  - by Sanjeev Sharma

  Consider a hypothetical scenario where you have been tasked to set up retail operations for a electronic goods or daily consumables or a luxury brand etc. It is very likely you will be faced with the following questions: What are the essential business capabilities that you must have in place?  What are the essential business activities under-pinning each of the business capabilities, identified in Step 1? What are the set of steps that you need to perform to execute each of the business activities, identified in Step 2? Answers to the above will drive your investments in software and hardware to enable the core retail operations. More importantly, the choices you make in responding to the above questions will several implications in the short-run and in the long-run. In the short-term, you will incur the time and cost of defining your technology requirements, procuring the software/hardware components and getting them up and running. In the long-term, as you grow in operations organically or through M&A, partnerships and franchiser business models  you will invariably need to make more technology investments to manage the greater complexity (scale and scope) of business operations.  "As new software applications, such as time & attendance, labor scheduling, and POS transactions, just to mention a few, are introduced into the store environment, it takes a disproportionate amount of time and effort to integrate them with existing store applications. These integration projects can add up to 50 percent to the time needed to implement a new software application and contribute significantly to the cost of the overall project, particularly if a systems integrator is called in. This has been the reality that all retailers have had to live with over the last two decades. The effect of the environment has not only been to increase costs, but also to limit retailers' ability to implement change and the speed with which they can do so." (excerpt taken from here) Now, one would think a lot of retailers would have already gone through the pain of finding answers to these questions, so why re-invent the wheel? Precisely so, a major effort began almost 17 years ago in the retail industry to make it less expensive and less difficult to deploy new technology in stores and at the retail enterprise level. This effort is called the Association for Retail Technology Standards (ARTS). Without standards such as those defined by ARTS, you would very likely end up experiencing the following: Increased Time and Cost due to resource wastage arising from re-inventing the wheel i.e. re-creating vanilla processes from scratch, and incurring, otherwise avoidable, mistakes and errors by ignoring experience of others Sub-optimal Process Efficiency due to narrow, isolated view of processes thereby ignoring process inter-dependencies i.e. optimizing parts but not the whole, and resulting in lack of transparency and inter-departmental finger-pointing Embracing ARTS standards as a blue-print for establishing or managing or streamlining your retail operations can benefit you in the following ways: Improved Time-to-Market from parity with industry best-practice processes e.g. ARTS, thus avoiding “reinventing the wheel” for common retail processes and focusing more on customizing processes for differentiations, and lowering integration complexity and risk with a standardized vocabulary for exchange between internal and external i.e. partner systems Lower Operating Costs by embracing the ARTS enterprise-wide process reference model for developing and streamlining retail operations holistically instead of a narrow, silo-ed view, and  procuring IT systems in compliance with ARTS thus avoiding IT budget marginalization While parity with industry standards such as ARTS business process model by itself does not create a differentiation, it does however provide a higher starting point for bridging the strategy-execution gap in setting up and improving retail operations.

  Read the article

• Notes - Part II - Play with JavaFX

  - by Silviu Turuga

  Open the project from last lesson Double click on NotesUI.fmxl, this will open the JavaFX Scene Builder On the left side you have a area called Hierarchy, from there press Del or Shift+Backspace on Mac to delete the Button and the Label. You'll receive a warning, that some components have been assigned an fx:id, click Delete as we don't need them anymore. Resize the AnchorPane to have enough room for our design, eg. 820x550px From the top left pick the Container called Accordion and drag over the AnchorPane design Chose then from Controls a List View and drag inside the Accordion. You'll notice that by default the Accordion has 2 TitledPane, and you can switch between them by clicking on their name. I'll let you the pleasure to do the rest in order to get the following result  Here is the list of objects used Save it and then return to NetBeans Run the application and it should be run without any issue. If you click on buttons they all are functional, but nothing happens as we didn't link them with any action. We'll see this in the next episode. Now, let's play a little bit with the application and try to resize it… Have you notice the behavior? If the form is too small, some objects aren't visible, if it is too large there is too much space . That's for sure something that your users won't like and you as a programmer have to care about this. From NetBeans double click NotesUI.fmxl so to return back to JavaFX Scene Builder Select the TextField from bottom left of Notes, the one where I put the text Category and then from the right part of JavaFX Scene Builder you'll notice a panel called Inspector. Chose Layout and then click on the dotted lines from left and bottom of the square, like you see in the below image This will make the textfield to have always the same distance from left and bottom no matter the size of the form. Save and run the application. Note that whenever the form is changing the Height, the Category TextField has the same distance from the bottom. Select Accordion and do the same steps but also check the top dotted line, because we want the Accordion to have the same height as the main form has. I'll let you the pleasure to do the same for the rest of components. It's very important to design an application that can be resize by user and in the same time, all the buttons are on place. Last step is to make sure our application is not getting smaller then a certain size, as this will hide parts of our layout. So select the AnchorPane and from Inspector go to Layout and note down the Width and Height. Go back to NetBeans and open the file Main.java and add the following code just after stage.setScene(scene); (around line 26) stage.setMinWidth(820); stage.setMinHeight(550); Use your own width and height. This will prevent user to reduce the width or height of your application to a value that will hide parts of your layout. So now you should have done most of the design part and next time we'll see how can we enter some data into our newly created application… Note: in case you miss something, here are the source files of the project till this point. 

  Read the article

• ReSharper 8.0 EAP now available

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/28/resharper-8.0-eap-now-available.aspxJetbrains have just released |ReSharper 8.0 Beta on their Early Access |Programme at http://www.jetbrains.com/resharper/whatsnew/?utm_source=resharper8b&utm_medium=newsletter&utm_campaign=resharper&utm_content=customersResharper 8.0 comes with the following new features:Support for Visual Studio 2013 Preview. Yes, ReSharper is known to work well with the fresh preview of Visual Studio 2013, and if you have already started digging into it, ReSharper 8.0 Beta is ready for the challenge.Faster code fixes. Thanks to the new Fix in Scope feature, you can choose to batch-fix some of the code issues that ReSharper detects in the scope of a project or the whole solution. Supported fixes include removing unused directives and redundant casts.Project dependency viewer. ReSharper is now able to visualize a project dependency graph for a bird's eye view of dependencies within your solution, all without compiling anything!Multifile templates. ReSharper's file templates can now be expanded to generate more than one file. For instance, this is handy for generating pairs of a main logic class and a class for extensions, or sets of partial files.Navigation improvements. These include a new action called Go to Everything to let you search for a file, type or method name from the same input box; support for line numbers in navigation actions; a new tool window called Assembly Explorer for browsing through assemblies; and two more contextual navigation actions: Navigate to Generic Substitutions and Navigate to Assembly Explorer.New solution-wide refactorings. The set of fresh refactorings is headlined by the highly requested Move Instance Method to move methods between classes without making them static. In addition, there are Inline Parameter and Pull Parameter. Last but not least, we're also introducing 4 new XAML-specific refactorings!Extraordinary XAML support. A plethora of new and improved functionality for all developers working with XAML code includes dedicated grid inspections and quick-fixes; Extract Style, Extract, Move and Inline Resource refactorings; atomic renaming of dependency properties; and a lot more.More accessible code completion. ReSharper 8 makes more of its IntelliSense magic available in automatic completion lists, including extension methods and an option to import a type. We're also introducing double completion which gives you additional completion items when you press the corresponding shortcut for the second time.A new level of extensibility. With the new NuGet-based Extension Manager, discovering, installing and uninstalling ReSharper extensions becomes extremely easy in Visual Studio 2010 and higher. When we say extensions, we mean not only full-fledged plug-ins but also sets of templates or SSR patterns that can now be shared much more easily.CSS support improvements. Smarter usage search for CSS attributes, new CSS-specific code inspections, configurable support for CSS3 and earlier versions, compatibility checks against popular browsers - there's a rough outline of what's new for CSS in ReSharper 8.A command-line version of ReSharper. ReSharper 8 goes beyond Visual Studio: we now provide a free standalone tool with hundreds of ReSharper inspections and additionally a duplicate code finder that you can integrate with your CI server or version control system.Multiple minor improvements in areas such as decompiling and code formatting, as well as support for the Blue Theme introduced in Visual Studio 2012 Update 2.

  Read the article

• Cream of the Crop

  - by KemButller

  JD Edwards has been working hard to ensure that you shouldn't have to work so hard! Yet there are still JD Edwards customers that may not be up to speed on all the new and or improved tools and utilities we have delivered, all designed to make your life easier. So today, I want to share what I consider to be the cream of the crop….those items that every customer should know about and leverage to make ERP life just a little bit (or A LOT) easier! These are my top picks, the cream of a very good crop! Explore and enjoy, and gain some of your time back to do with as you please. · www.runjde.com It’s where to go when you need to know! The Resource Kits available on www.runjde.com provide comprehensive Resource Kits (guides) by user type. The guides provide brief descriptions of the wide array of resources that are available to JD Edwards’s eco system and links to each of those resources. · My Oracle Support (MOS) Information Centers This link will take you to an index that is designed to provide you with simple and quick navigation to the available EnterpriseOne Information Centers. This index provides links to: · EnterpriseOne Application specific Information Centers · EnterpriseOne Tools and Technology Information Centers · EnterpriseOne Performance Information Center · EnterpriseOne 9.1 and 9.0 Information Centers Information Centers give Oracle the ability to aggregate content for a given focus area and present this content in categories for easy browsing by our customers. Information Centers offer a variety of focused dynamic content organized around one or more of the following tasks. · Overview · Use · Troubleshooting · Patching and Maintenance · Install and Configure · Upgrade · Optimize Performance · Security · Certify JD Edwards Newsletters Be in the know by reading the Global Customer Support Product Newsletters. They are PACKED with news and information covering a wide range of topics and news. It is a must read if you want to know what’s happening in the JD Edwards universe! Read the latest EntepriseOne newsletter Read the latest World newsletter Learn How to receive notification when a new newsletter edition is published Oracle Learning Library – (OLL) Oracle Learn Library is the place to go for easy access to JD Edwards Application and Tools training. For a comprehensive view of the training available for a specific product/functional area, explore the Knowledge Paths For Net Change (new feature) training, explore the TOI sessions (TOI stands for Transfer Of Information). Tip: Be sure to experiment with the search filters! · www.upgradejde.com The site designed to help customers and partners with the process of upgrading JD Edwards. The site is a wealth of information, tools and resources designed to assist in the evaluation, planning and execution steps required when upgrading. Of note is the wildly successful upgrade strategy known as “The Art of the Possible” wherein JD Edwards and many of our partners hold free workshops to teach customers how to conduct upgrades in 100 days or less. Equally important is the fact that on www.upgradejde.com, customers can gain visibility into planned enhancements using the Product and Technology Feature Catalogs. The catalogs are great for creating customer specific reports about the net change between older releases and current or planned releases. Examples of other key resources on www.upgradejde.com are the product data base changes between releases, extensibility guides, (formerly known as programmer’s guides), whitepapers, ROI calculators and much more!

  Read the article

• CFOs: Do You Have a Playbook for Growth?

  - by Oracle Accelerate for Midsize Companies

  by Jim Lein, Oracle Midsize Programs In most global markets, CFOs are optimistic about their company's growth opportunities. Deloitte's CFO Signals Report, "Time to Accelerate" found that: In the U.K. business optimism is at its highest level in three-and-a-half years Optimism in North America rose from a strong +42% last quarter (Q2 to Q3 2013) to an even stronger +54%. The inaugural Southeast Asia survey, 44% of CFOs reported a positive outlook despite worries over the Chinese economy and political uncertainty. Sustainable and profitable business growth doesn't usually happen by accident. Company's need a playbook for growth that's owned by the CFO. And today, that playbook must leverage the six enabling technologies--Social, Big Data, Mobile, Cloud, Analytics, and The Internet of Things (or, as Oracle president Mark Hurd explains, "The Internet of the People"). On Monday June 9 at  2:00 pm Eastern, CFO.com is hosting a webcast, "The CFO Playbook on Growth: How CFOs Can Boost Efficiency and Performance with Automation". Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} “Investing in technology begins with a business metric driven business case with clear tangible business results expected," says John Lieblang, Affiliate Partner with Waterstone Management Group. "The progressive CFO has learned how to forge a partnership with the CIO to align everyone in the 'result value chain' to be accountable for the business results not just for functional technology.” Click HERE to register  Looking for more news and information about Oracle Solutions for Midsize Companies? Read the latest Oracle for Midsize Companies Newsletter Sign-up to receive the latest communications from Oracle’s industry leaders and experts Jim Lein I evangelize Oracle's enterprise solutions for growing midsize companies. I recently celebrated 15 years with Oracle, having joined JD Edwards in 1999. I'm based in Evergreen, Colorado and love relating stories about creativity and innovation whether they be about software, live music, or the mountains. The views expressed here are my own, and not necessarily those of Oracle.

  Read the article

• Resolving collisions between dynamic game objects

  - by TheBroodian

  I've been building a 2D platformer for some time now, I'm getting to the point where I am adding dynamic objects to the stage for testing. This has prompted me to consider how I would like my character and other objects to behave when they collide. A typical staple in many 2D platformer type games is that the player takes damage upon touching an enemy, and then essentially becomes able to pass through enemies during a period of invulnerability, and at the same time, enemies are able to pass through eachother freely. I personally don't want to take this approach, it feels strange to me that the player should receive arbitrary damage for harmless contact to an enemy, despite whether the enemy is attacking or not, and I would like my enemies' interactions between each other (and my player) to be a little more organic, so to speak. In my head I sort of have this idea where a game object (player, or non player) would be able to push other game objects around by manner of 'pushing' each other out of one anothers' bounding boxes if there is an intersection, and maybe correlate the repelling force to how much their bounding boxes are intersecting. The problem I'm experiencing is I have no idea what the math might look like for something like this? I'll show what work I've done so far, it sort of works, but it's jittery, and generally not quite what I would pass in a functional game: //Clears the anti-duplicate buffer collisionRecord.Clear(); //pick a thing foreach (GameObject entity in entities) { //pick another thing foreach (GameObject subject in entities) { //check to make sure both things aren't the same thing if (!ReferenceEquals(entity, subject)) { //check to see if thing2 is in semi-near proximity to thing1 if (entity.WideProximityArea.Intersects(subject.CollisionRectangle) || entity.WideProximityArea.Contains(subject.CollisionRectangle)) { //check to see if thing2 and thing1 are colliding. if (entity.CollisionRectangle.Intersects(subject.CollisionRectangle) || entity.CollisionRectangle.Contains(subject.CollisionRectangle) || subject.CollisionRectangle.Contains(entity.CollisionRectangle)) { //check if we've already resolved their collision or not. if (!collisionRecord.ContainsKey(entity.GetHashCode())) { //more duplicate resolution checking. if (!collisionRecord.ContainsKey(subject.GetHashCode())) { //if thing1 is traveling right... if (entity.Velocity.X > 0) { //if it isn't too far to the right... if (subject.CollisionRectangle.Contains(new Microsoft.Xna.Framework.Rectangle(entity.CollisionRectangle.Right, entity.CollisionRectangle.Y, 1, entity.CollisionRectangle.Height)) || subject.CollisionRectangle.Intersects(new Microsoft.Xna.Framework.Rectangle(entity.CollisionRectangle.Right, entity.CollisionRectangle.Y, 1, entity.CollisionRectangle.Height))) { //Find how deep thing1 is intersecting thing2's collision box; float offset = entity.CollisionRectangle.Right - subject.CollisionRectangle.Left; //Move both things in opposite directions half the length of the intersection, pushing thing1 to the left, and thing2 to the right. entity.Velocities.Add(new Vector2(-(((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); subject.Velocities.Add(new Vector2((((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); } } //if thing1 is traveling left... if (entity.Velocity.X < 0) { //if thing1 isn't too far left... if (entity.CollisionRectangle.Contains(new Microsoft.Xna.Framework.Rectangle(subject.CollisionRectangle.Right, subject.CollisionRectangle.Y, 1, subject.CollisionRectangle.Height)) || entity.CollisionRectangle.Intersects(new Microsoft.Xna.Framework.Rectangle(subject.CollisionRectangle.Right, subject.CollisionRectangle.Y, 1, subject.CollisionRectangle.Height))) { //Find how deep thing1 is intersecting thing2's collision box; float offset = subject.CollisionRectangle.Right - entity.CollisionRectangle.Left; //Move both things in opposite directions half the length of the intersection, pushing thing1 to the right, and thing2 to the left. entity.Velocities.Add(new Vector2((((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); subject.Velocities.Add(new Vector2(-(((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); } } //Make record that thing1 and thing2 have interacted and the collision has been solved, so that if thing2 is picked next in the foreach loop, it isn't checked against thing1 a second time before the next update. collisionRecord.Add(entity.GetHashCode(), subject.GetHashCode()); } } } } } } } } One of the biggest issues with my code aside from the jitteriness is that if one character were to land on top of another character, it very suddenly and abruptly resolves the collision, whereas I would like a more subtle and gradual resolution. Any thoughts or ideas are incredibly welcome and helpful.

  Read the article

• Where should instantiated classes be stored?

  - by Eric C.

  I'm having a bit of a design dilemma here. I'm writing a library that consists of a bunch of template classes that are designed to be used as a base for creating content. For example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } The problem is, not only is the library providing the templates, it will also supply quite a few predefined templates which are instances of these template classes. The question is, where do I put these instances of the templates? The three solutions I've come up with so far are: 1) Provide serialized instances of the templates as files. On the one hand, this solution would keep the instances separated from the library itself, which is nice, but it would also potentially add complexity for the user. Even if we provided methods for loading/deserializing the files, they'd still have to deal with a bunch of files, and some kind of config file so the app knows where to look for those files. Plus, creating the template files would probably require a separate app, so if the user wanted to stick with the files method of storing templates, we'd have to provide some kind of app for creating the template files. Also, this requires external dependencies for testing the templates in the user's code. 2) Add readonly instances to the template class Example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template PredefinedTemplate { get { Template templateInstance = new Template(); templateInstance.Name = "Some Name"; templateInstance.Description = "A description"; ... return templateInstance; } } public Template() { //constructor } public void DoSomething() { //does something } ... } This method would be convenient for users, as they would be able to access the predefined templates in code directly, and would be able to unit test code that used them. The drawback here is that the predefined templates pollute the Template type namespace with a bunch of extra stuff. I suppose I could put the predefined templates in a different namespace to get around this drawback. The only other problem with this approach is that I'd have to basically duplicate all the namespaces in the library in the predefined namespace (e.g. Templates.SubTemplates and Predefined.Templates.SubTemplates) which would be a pain, and would also make refactoring more difficult. 3) Make the templates abstract classes and make the predefined templates inherit from those classes. For example: public abstract class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } and public class PredefinedTemplate : Template { public PredefinedTemplate() { this.Name = "Some Name"; this.Description = "A description"; this.Attribute1 = "Some Value"; ... } } This solution is pretty similar to #2, but it ends up creating a lot of classes that don't really do anything (none of our predefined templates are currently overriding behavior), and don't have any methods, so I'm not sure how good a practice this is. Has anyone else had any experience with something like this? Is there a best practice of some kind, or a different/better approach that I haven't thought of? I'm kind of banging my head against a wall trying to figure out the best way to go. Thanks!

  Read the article

• Setting up your project

  - by ssoolsma

  Before any coding we first make sure that the project is setup correctly. (Please note, that this blog is all about how I do it, and incase i forget, i can return here and read how i used to do it. Maybe you come up with some idea’s for yourself too.) In these series we will create a minigolf scoring cart. Please note that we eventually create a fully functional application which you cannot use unless you pay me alot of money! (And i mean alot!)   1. Download and install the appropriate tools. Download the following: - TestDriven.Net (free version on the bottom of the download page) - nUnit TestDriven is a visual studio plugin for many unittest frameworks, which allows you to run  / test code very easily with a right click –> run test. nUnit is the test framework of choice, it works seamless with TestDriven.   2. Create your project Fire up visual studio and create your DataAccess project:  MidgetWidget.DataAccess is it’s name. (I choose MidgetWidget as name for the solution). Also, make sure that the MidgetWidget.DataAccess project is a c# ClassLibary Hit OK to create the solution. (in the above example the checkbox Create directory for solution is checked, because i’m pointing the location to the root of c:\development where i want MidgetWidget to be created.   3. Setup the database. You should have thought about a database when you reach this point. Let’s assume that you’ve created a database as followed: Table name: LoginKey Fields: Id (PK), KeyName (uniqueidentifier), StartDate (datetime), EndDate (datetime) Table name:  Party Fields: Id (PK), Key (uniqueidentifier, Created (datetime) Table name:  Person Fields: Id(PK),  PartyId (int), Name (varchar) Tablename: Score Fields: Id (PK), Trackid (int), PersonId (int), Strokes (int) Tablename: Track Fields: Id (PK), Name (varchar) A few things to take note about the database setup. I’ve singularized all tablenames (not “Persons“ but “Person”. This is because in a few minutes, when this is in our code, we refer to the database objects as single rows. We retrieve a single Person not a single “Persons” from the database.   4. Create the entity framework In your solution tree create a new folder and call it “DataModel”. Inside this folder: Add new item –> and choose ADO.NET Entity Data Model. Name it “Entities.edmx” and hit  “Add”. Once the edmx is added, open it (double click) and right click the white area and choose “Update model from database…". Now, point it to your database (i include sensitive data in the connectionstring) and select all the tables. After that hit “Finish” and let the entity framework do it’s code generation. Et Voila, after a few seconds you have set up your entity model. Next post we will start building the data-access! I’m off to the beach.

  Read the article

• Can you/should you develop components for ASP.NET MVC?

  - by Vilx-

  Following from the previous question I've started to wonder - is it possible to implement "Components" in ASP.NET MVC (latest version)? And should you? Let's clarify what I mean with a "component". With that I mean a "control" (aka "widget"), similar to those that ASP.NET webforms is built upon. A gridview might be a good example. In webforms I can place on my form a datasource component (one line of code), a gridview component (another line of code) and bind them together (specify an attribute on the gridview). In the codebehind file I fill the datasource with data (a few lines of DB-querying code), and I'm all set. At this point the gridview is a fully functional standalone component. I can open the form, and I'll see all the data. I can sort it by clicking on the column headers; it is split into several pages; I can drag the column headers around and rearrange columns; I can turn on "grouping" mode; etc. And I don't need to write another line of code for any of it. The gridview, as a component, already has all the code tucked away in its classes and assemblies. I just place it on the form, initialize it, and it Just Works. At some times (like sorting or navigation to a different page) it will also perform ajax callbacks to the server, but those too will be handled internally, with my code having no knowledge at all about it. And then there are also events that I can attach if I want to get notified when something happens. In MVC I cannot see a way of doing this cleanly. Sure, there are the partial views, but those only handle half of the problem - they render the initial HTML. Some more can be achieved with client-side Javascript (like column re-arranging), but when the grid needs to do an ajax callback (say, to fetch the next page of data), my code will have to get involved and process that request. At best I guess I can provide some helper methods to process it, but I'll have to write the code that calls them, and also provide a controller method with signature matching the arguments of that callback. I guess that I could make some hacks with global events or special routes or something, but that just seems... hackish. Unelegant. Perhaps this is not the MVC way? Although I've completed one project in it, I'm still far from being an MVC expert. But then what is? In the intranet application that we're building there are dozens upon dozens of such grids. Naturally I want them all to have a unified look & behavior, and I don't want to repeat the same code all over the place. So what's the "MVC" approach to this problem?

  Read the article

• Executing Stored Procedures in Visual Studio LightSwitch.

  - by dataintegration

  A LightSwitch Project is very easy way to visualize and manipulate information directly from one of our ADO.NET Providers. But when it comes to executing the Stored Procedures, it can be a bit more complicated. In this article, we will demonstrate how to execute a Stored Procedure in LightSwitch. For the purposes of this article, we will be using the RSSBus Email Data Provider, but the same process will work with any of our ADO.NET Providers. Creating the RIA Service. Step 1: Open Visual Studio and create a new WCF RIA Service Class Project. Step 2:Add the reference to the RSSBus Email Data Provider dll in the (ProjectName).Web project. Step 3: Add a new Domain Service Class to the (ProjectName).Web project. Step 4: In the new Domain Service Class, create a new class with the attributes needed for the Stored Procedure's parameters. In this demo, the Stored Procedure we are executing is called SendMessage. The parameters we will need are as follows: public class NewMessage{ [Key] public int ID { get; set; } public string FromEmail { get; set; } public string ToEmail { get; set; } public string Subject { get; set; } public string Text { get; set; } } Note: The created class must have an ID which will serve as the key value. Step 5: Create a new method that will executed when the insert event fires. Inside this method you can use the standards ADO.NET code which will execute the stored procedure. [Insert] public void SendMessage(NewMessage newMessage) { try { EmailConnection conn = new EmailConnection(connectionString); EmailCommand comm = new EmailCommand("SendMessage", conn); comm.CommandType = System.Data.CommandType.StoredProcedure; if (!newMessage.FromEmail.Equals("")) comm.Parameters.Add(new EmailParameter("@From", newMessage.FromEmail)); if (!newMessage.ToEmail.Equals("")) comm.Parameters.Add(new EmailParameter("@To", newMessage.ToEmail)); if (!newMessage.Subject.Equals("")) comm.Parameters.Add(new EmailParameter("@Subject", newMessage.Subject)); if (!newMessage.Text.Equals("")) comm.Parameters.Add(new EmailParameter("@Text", newMessage.Text)); comm.ExecuteNonQuery(); } catch (Exception exc) { Console.WriteLine(exc.Message); } } Step 6: Create a query method. We are not going to be using getNewMessages(), so it does not matter what it returns for the purpose of our example, but you will need to create a method for the query event as well. [Query(IsDefault=true)] public IEnumerable<NewMessage> getNewMessages() { return null; } Step 7: Rebuild the whole solution. Creating the LightSwitch Project. Step 8: Open Visual Studio and create a new LightSwitch Application Project. Step 9: On the Data Sources, add a new data source. Choose a WCF RIA Service Step 10: Choose to add a new reference and select the (Project Name).Web.dll generated from the RIA Service. Step 11: Select the entities you would like to import. In this case, we are using the recently created NewMessage entity. Step 13: On the Screens section, create a new screen and select the NewMessage entity as the Screen Data. Step 14: After you run the project, you will be able to add a new record and save it. This will execute the Stored Procedure and send the new message. If you create a screen to check the sent messages, you can refresh this screen to see the mail you sent. Sample Project To help you with get started using stored procedures in LightSwitch, download the fully functional sample project. You will also need the RSSBus Email Data Provider to make the connection. You can download a free trial here.

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• What do you need to know to be a world-class master software developer? [closed]

  - by glitch

  I wanted to bring up this question to you folks and see what you think, hopefully advise me on the matter: let's say you had 30 years of learning and practicing software development in front of you, how would you dedicate your time so that you'd get the biggest bang for your buck. What would you both learn and work on to be a world-class software developer that would make a large impact on the industry and leave behind a legacy? I think that most great developers end up being both broad generalists and specialists in one-two areas of interest. I'm thinking Bill Joy, John Carmack, Linus Torvalds, K&R and so on. I'm thinking that perhaps one approach would be to break things down by categories and establish a base minimum of "software development" greatness. I'm thinking: Operating Systems: completely internalize the core concepts of OS, perhaps gain a lot of familiarity with an OSS one such as Linux. Anything from memory management to device drivers has to be complete second nature. Programming Languages: this is one of those topics that imho has to be fully grokked even if it might take many years. I don't think there's quite anything like going through the process of developing your own compiler, understanding language design trade-offs and so on. Programming Language Pragmatics is one of my favorite books actually, I think you want to have that internalized back to back, and that's just the start. You could go significantly deeper, but I think it's time well spent, because it's such a crucial building block. As a subset of that, you want to really understand the different programming paradigms out there. Imperative, declarative, logic, functional and so on. Anything from assembly to LISP should be at the very least comfortable to write in. Contexts: I believe one should have experience working in different contexts to truly be able to appreciate the trade-offs that are being made every day. Embedded, web development, mobile development, UX development, distributed, cloud computing and so on. Hardware: I'm somewhat conflicted about this one. I think you want some understanding of computer architecture at a low level, but I feel like the concepts that will truly matter will be slightly higher level, such as CPU caching / memory hierarchy, ILP, and so on. Networking: we live in a completely network-dependent era. Having a good understanding of the OSI model, knowing how the Web works, how HTTP works and so on is pretty much a pre-requisite these days. Distributed systems: once again, everything's distributed these days, it's getting progressively harder to ignore this reality. Slightly related, perhaps add solid understanding of how browsers work to that, since the world seems to be moving so much to interfacing with everything through a browser. Tools: Have a really broad toolset that you're familiar with, one that continuously expands throughout the years. Communication: I think being a great writer, effective communicator and a phenomenal team player is pretty much a prerequisite for a lot of a software developer's greatness. It can't be overstated. Software engineering: understanding the process of building software, team dynamics, the requirements of the business-side, all the pitfalls. You want to deeply understand where what you're writing fits from the market perspective. The better you understand all of this, the more of your work will actually see the daylight. This is really just a starting list, I'm confident that there's a ton of other material that you need to master. As I mentioned, you most likely end up specializing in a bunch of these areas as you go along, but I was trying to come up with a baseline. Any thoughts, suggestions and words of wisdom from the grizzled veterans out there who would like to share their thoughts and experiences with this? I'd really love to know what you think!

  Read the article

• Upgrading to 9.2 - Info You Can Use (part 1)

  - by John Webb

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Rebekah Jackson joins our blog with a series of helpful hints on planning your upgrade to PeopleSoft 9.2.   Find Features & Capabilities There are many ways that you might learn about new features and capabilities within our releases, but if you aren’t sure where to start or how best to go about it, we recommend: Go to www.peoplesoftinfo.com Select the product line you are interested in, and go to the ‘Release Content’ tab Use the Video Feature Overviews (VFOs) on YouTube and the Cumulative Feature Overview (CFO) tool to find features and functions. The VFOs are brief recordings that summarize some of our most popular capabilities. These recordings are great tools for learning about new features, or helping others to visualize the value they can bring to your organization. The VFOs focus on some of our highest value and most compelling new capabilities. We also provide summarized ‘Why Upgrade to 9.2’ VFOs for HCM, Financials, and Supply Chain. The CFO is a spreadsheet based tool that allows you to select the release you are currently on, and compare it to the new release. It will return the list of all new features and capabilities, by product. You can browse the full list and / or highlight areas that look particularly interesting. Once you have a list of features by product, use the Release Value Proposition, Pre-Release Notes, and the Release Notes documents to get more details on and supporting value statements about why those features will be helpful. Gather additional data and supporting information, including: Go to the Product Data Sheets tab, and review the respective data sheets. These summarize the capabilities in the product, and provide succinct value statements for the product and capabilities. The PeopleSoft 9.2 Upgrade page, which has many helpful resources. Important Notes:   -  We recommend that you go through the above steps for the application areas of interest, as well as for PeopleTools. There are many areas in PeopleTools 8.53 and the 9.2 application releases that combine technical and functional capabilities to deliver transformative value.    - We also recommend that you review the Portal Solutions content. With your license to PeopleSoft applications, you have access to many of the most powerful capabilities within the Interaction Hub.    -  If you have recently upgraded to PeopleSoft 9.1, and an immediate upgrade to 9.2 is simply not realistic, you can apply the same approaches described here to find untapped capabilities in your current products. Many of the features in 9.2 were delivered first in our 9.1 Feature Packs. To find the Release Value Proposition, Pre-Release Notes, and Release Notes for these releases, search on ‘PeopleSoft 9.1 Documentation Home Page’ on My Oracle Support, and select your desired product area. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• Multiple Zend application code organisation

  - by user966936

  For the past year I have been working on a series of applications all based on the Zend framework and centered on a complex business logic that all applications must have access to even if they don't use all (easier than having multiple library folders for each application as they are all linked together with a common center). Without going into much detail about what the project is specifically about, I am looking for some input (as I am working on the project alone) on how I have "grouped" my code. I have tried to split it all up in such a way that it removes dependencies as much as possible. I'm trying to keep it as decoupled as I logically can, so in 12 months time when my time is up anyone else coming in can have no problem extending on what I have produced. Example structure: applicationStorage\ (contains all applications and associated data) applicationStorage\Applications\ (contains the applications themselves) applicationStorage\Applications\external\ (application grouping folder) (contains all external customer access applications) applicationStorage\Applications\external\site\ (main external customer access application) applicationStorage\Applications\external\site\Modules\ applicationStorage\Applications\external\site\Config\ applicationStorage\Applications\external\site\Layouts\ applicationStorage\Applications\external\site\ZendExtended\ (contains extended Zend classes specific to this application example: ZendExtended_Controller_Action extends zend_controller_Action ) applicationStorage\Applications\external\mobile\ (mobile external customer access application different workflow limited capabilities compared to full site version) applicationStorage\Applications\internal\ (application grouping folder) (contains all internal company applications) applicationStorage\Applications\internal\site\ (main internal application) applicationStorage\Applications\internal\mobile\ (mobile access has different flow and limited abilities compared to main site version) applicationStorage\Tests\ (contains PHP unit tests) applicationStorage\Library\ applicationStorage\Library\Service\ (contains all business logic, services and servicelocator; these are completely decoupled from Zend framework and rely on models' interfaces) applicationStorage\Library\Zend\ (Zend framework) applicationStorage\Library\Models\ (doesn't know services but is linked to Zend framework for DB operations; contains model interfaces and model datamappers for all business objects; examples include Iorder/IorderMapper, Iworksheet/IWorksheetMapper, Icustomer/IcustomerMapper) (Note: the Modules, Config, Layouts and ZendExtended folders are duplicated in each application folder; but i have omitted them as they are not required for my purposes.) For the library this contains all "universal" code. The Zend framework is at the heart of all applications, but I wanted my business logic to be Zend-framework-independent. All model and mapper interfaces have no public references to Zend_Db but actually wrap around it in private. So my hope is that in the future I will be able to rewrite the mappers and dbtables (containing a Models_DbTable_Abstract that extends Zend_Db_Table_Abstract) in order to decouple my business logic from the Zend framework if I want to move my business logic (services) to a non-Zend framework environment (maybe some other PHP framework). Using a serviceLocator and registering the required services within the bootstrap of each application, I can use different versions of the same service depending on the request and which application is being accessed. Example: all external applications will have a service_auth_External implementing service_auth_Interface registered. Same with internal aplications with Service_Auth_Internal implementing service_auth_Interface Service_Locator::getService('Auth'). I'm concerned I may be missing some possible problems with this. One I'm half-thinking about is a config.ini file for all externals, then a separate application config.ini overriding or adding to the global external config.ini. If anyone has any suggestions I would be greatly appreciative. I have used contextswitching for AJAX functions within the individual applications, but there is a big chance both external and internal will get web services created for them. Again, these will be separated due to authorization and different available services. \applicationstorage\Applications\internal\webservice \applicationstorage\Applications\external\webservice

  Read the article

• Making user input/math on data fast, unlike excel type programs

  - by proGrammar

  I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

  Read the article

• 'Microsoft.Practices.EnterpriseLibrary.Caching.CacheFactory' threw an exception

  - by user281180

  Hi I`m having the error message: The type initializer for 'Microsoft.Practices.EnterpriseLibrary.Caching.CacheFactory' threw an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.Practices.ObjectBuilder2, Version=2.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. Source Error: Line 30: private static ICacheManager GetCacheManager() Line 31: { Line 32: return CacheFactory.GetCacheManager(cacheManagerName); Line 33: } Line 34: } Source File: C:\Dev\DEV\HotHouse\HotHousetest3_rtmClone107\Code\MvcUI\State\PersistentCache.cs Line: 32 Assembly Load Trace: The following information can be helpful to determine why the assembly 'Microsoft.Practices.ObjectBuilder2, Version=2.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded. , whereas my colleages using the same dll, are not having the error message. Help please. I have Microsoft.Practices.EnterpriseLibrary.Caching and Microsoft.Practices.EnterpriseLibrary.Common as references both version 4.1.0.0 and runtime version v2.0.50727.

  Read the article

• The "CreateRiaClientFilesTask" task failed unexpectedly.

  - by Mohammadreza

  Hi guys. I've VS 2010 and recently installed WCF RIA Services V1.0. For testing I have created a new Silverligh Business project but now every now and then when I rebuild the solution I receive the following error: Does anybody know why I get this? Thanks Error 1 The "CreateRiaClientFilesTask" task failed unexpectedly. System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.ServiceModel.DomainServices.Tools, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. File name: 'Microsoft.ServiceModel.DomainServices.Tools, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName) at System.RuntimeType.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.Type.GetType(String typeName, Boolean throwOnError) at System.Web.Hosting.HostingEnvironment.CreateWellKnownObjectInstance(String assemblyQualifiedName, Boolean failIfExists) at System.Web.Hosting.HostingEnvironment.CreateWellKnownObjectInstance(String assemblyQualifiedName, Boolean failIfExists) at System.Web.Hosting.ApplicationManager.CreateObjectInternal(String appId, Type type, IApplicationHost appHost, Boolean failIfExists, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.ApplicationManager.CreateObjectInternal(String appId, Type type, IApplicationHost appHost, Boolean failIfExists) at System.Web.Compilation.ClientBuildManager.CreateObject(Type type, Boolean failIfExists) at Microsoft.ServiceModel.DomainServices.Tools.CreateRiaClientFilesTask.CreateSharedTypeService(ClientBuildManager clientBuildManager, IEnumerable`1 serverAssemblies, ILogger logger) at Microsoft.ServiceModel.DomainServices.Tools.CreateRiaClientFilesTask.GenerateClientProxies() at Microsoft.ServiceModel.DomainServices.Tools.CreateRiaClientFilesTask.ExecuteInternal() at Microsoft.ServiceModel.DomainServices.Tools.RiaClientFilesTask.Execute() at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute() at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. BusinessApplication2

  Read the article

• Could not load file or assembly FSharp.Core, Version=4.0.0.0

  - by Ken

  I'm trying to deploy a web application which uses F# 4.0 on Windows Server 2008. It works on my computer where VS2010 is installed but it doesn't work on the server. Everytime you open the page you'll get this error message: Could not load file or assembly 'FSharp.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. I've installed .NET 4 using the web platform installer. F# PowerPack is installed too. I found this page: http://connect.microsoft.com/VisualStudio/feedback/details/507202/error-in-working-with-f It suggests you to reinstall F#, but the link to download F# seems to be broken. And it might not be the same problem I have. I've also tried to install Microsoft F# 2.0.0.0 since it's the only F# redistribution I could find. But it doesn't help at all. Has anyone get something like this to work? Any help would be appreciated. Thanks.

  Read the article

• How to set SGEN toolpath in Msbuild to target 3.5 framework

  - by Craig Shearer

  I've just upgraded a project from VS2008 to VS2010 but I'm still targeting the 3.5 framework. In my project file I have a custom task to run SGEN to generate my XmlSerializers.dll. However the version of sgen being run targets the 4.0 framework. As a result, when I run my application I get the error message: "Could not load file or assembly 'XXXX.XXXX.XmlSerializers' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded." The Sgen task looks like this: <Target Name="AfterBuild" DependsOnTargets="AssignTargetPaths;Compile;ResolveKeySource" Inputs="$(MSBuildAllProjects);@(IntermediateAssembly)" Outputs="$(OutputPath)$(_SGenDllName)"> <!-- Delete the file because I can't figure out how to force the SGen task. --> <Delete Files="$(TargetDir)$(TargetName).XmlSerializers.dll" ContinueOnError="true" /> <SGen BuildAssemblyName="$(TargetFileName)" BuildAssemblyPath="$(OutputPath)" References="@(ReferencePath)" ShouldGenerateSerializer="true" UseProxyTypes="false" KeyContainer="$(KeyContainerName)" KeyFile="$(KeyOriginatorFile)" DelaySign="$(DelaySign)" ToolPath="$(SGenToolPath)"> <Output TaskParameter="SerializationAssembly" ItemName="SerializationAssembly" /> </SGen> </Target> There's the ToolPath="$(SGenToolPath)". How do I make it run the version that targets 3.5? There's a similar question here but it doesn't help me much.

  Read the article

• OpenXML SDK: Make Excel recalculate formula

  - by chiccodoro

  I update some cells of an Excel spreadsheet through the Microsoft Office OpenXML SDK 2.0. Changing the values makes all cells containing formula that depend on the changed cells invalid. However, due to the cached values Excel does not recalculate the formular, even if the user clicks on "Calculate now". What is the best way to invalidate all dependent cells of the whole workbook through the SDK? So far, I've found the following code snippet at http://cdonner.com/introduction-to-microsofts-open-xml-format-sdk-20-with-a-focus-on-excel-documents.htm: public static void ClearAllValuesInSheet (SpreadsheetDocument spreadSheet, string sheetName) { WorksheetPart worksheetPart = GetWorksheetPartByName(spreadSheet, sheetName); foreach (Row row in worksheetPart.Worksheet. GetFirstChild().Elements()) { foreach (Cell cell in row.Elements()) { if (cell.CellFormula != null && cell.CellValue != null) { cell.CellValue.Remove(); } } } worksheetPart.Worksheet.Save(); } Besides the fact that this snippet does not compile for me, it has two limitations: It only invalidates a single sheet, although other sheets might contain dependent formula It does not take into account any dependencies. I am looking for a way that is efficient (in particular, only invalidates cells that depend on a certain cell's value), and takes all sheets into account. Update: In the meantime I have managed to make the code compile & run, and to remove the cached values on all sheets of the workbook. (See answers.) Still I am interested in better/alternative solutions, in particular how to only delete cached values of the cells that actually depend on the updated cell.

  Read the article

• glm matrix conversion for DirectX

  - by niktehpui

  For on of the coursework specification I need to work with DirectX, so I tried to implement a DirectX Renderer in my small cross-platform framework (to have it optionally available for Windows). Since I want to stick to my dependencies I want use glm for vector/matrix/quaternions math. The vectors seem to be fully compatible with DirectX, but the glm::mat4 is not working properly in DirectX Effects Framework. I assumed the reason is that DirectX uses row majors layouts and OpenGL column majors (although if I remember right internally in HLSL DX uses column major as well), so I transposed the matrix, but I still get no proper results compared to using XNA-Math. XNA-Version of the code (works): XMMATRIX world = XMMatrixIdentity(); XMMATRIX view = XMMatrixLookAtLH(XMVectorSet(5.0, 5.0, 5.0, 1.0f), XMVectorZero(), XMVectorSet(0.0f, 1.0f, 0.0f, 0.0f)); XMMATRIX proj = XMMatrixPerspectiveFovLH(0.25f*3.14f, 1.25f, 1.0f, 1000.0f); XMMATRIX worldViewProj = world*view*proj; m_fxWorldViewProj->SetMatrix(reinterpret_cast<float*>(&worldViewProj)); This works flawlessly and displays the expected colored cube. GLM-Version (does not work): glm::mat4 world(1.0f); glm::mat4 view = glm::lookAt(glm::vec3(5.0f, 5.0f, 5.0f), glm::vec3(0.0f, 0.0f, 0.0f), glm::vec3(0.0f, 1.0f, 0.0f)); glm::mat4 proj = glm::perspective(0.25f*3.14f, 1.25f, 1.0f, 1000.0f); glm::mat4 worldViewProj = glm::transpose(world*view*proj); m_fxWorldViewProj->SetMatrix(glm::value_ptr(worldViewProj)); Displays nothing, screen stays black. I really would like to stick to glm on all platforms.

  Read the article

• Webservices error for dev.virtualearth.net/webservices/geocode

  - by Xaisoft

  I am getting the following stacktrace and have no idea what I am looking at and how to debug and fix it: Here is the error: Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Reference.svcmap: Failed to generate code for the service reference 'GeocodeService'. Cannot import wsdl:portType Detail: An exception was thrown while running a WSDL import extension: System.ServiceModel.Description.DataContractSerializerMessageContractImporter Error: Could not load file or assembly 'System.Xml, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified. XPath to Error Source: //wsdl:definitions[@targetNamespace='http//dev.virtualearth.net /webservices/v1/geocode/contracts']/wsdl:portType[@name='IGeocodeService'] Cannot import wsdl:binding Detail: There was an error importing a wsdl:portType that the wsdl:binding is dependent on. XPath to wsdl:portType: //wsdl:definitions[@targetNamespace='http: //dev.virtualearth.net/webservices/v1/geocode/contracts'] /wsdl:portType[@name='IGeocodeService'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http: //dev.virtualearth.net /webservices/v1/geocode']/wsdl:binding[@name='BasicHttpBinding_IGeocodeService'] Cannot import wsdl:port Detail: There was an error importing a wsdl:binding that the wsdl:port is dependent on. XPath to wsdl:binding: //wsdl:definitions[@targetNamespace='http://dev.virtualearth.net /webservices/v1/geocode']/wsdl:binding[@name='BasicHttpBinding_IGeocodeService'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://dev.virtualearth.net /webservices/v1/geocode']/wsdl:service[@name='GeocodeService'] /wsdl:port[@name='BasicHttpBinding_IGeocodeService'] Cannot import wsdl:binding Detail: There was an error importing a wsdl:portType that the wsdl:binding is dependent on. XPath to wsdl:portType: //wsdl:definitions[@targetNamespace='http: //dev.virtualearth.net/webservices/v1/geocode/contracts'] /wsdl:portType[@name='IGeocodeService'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http: //dev.virtualearth.net /webservices/v1/geocode']/wsdl:binding[@name='CustomBinding_IGeocodeService'] Cannot import wsdl:port Detail: There was an error importing a wsdl:binding that the wsdl:port is dependent on. XPath to wsdl:binding: //wsdl:definitions[@targetNamespace='http://dev.virtualearth.net /webservices/v1/geocode']/wsdl:binding[@name='CustomBinding_IGeocodeService'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://dev.virtualearth.net /webservices/v1/geocode']/wsdl:service[@name='GeocodeService'] /wsdl:port[@name='CustomBinding_IGeocodeService']

  Read the article

• VSTS 2010 SGEN : error : Could not load file or assembly (Exception from HRESULT: 0x80131515)

  - by Developer IT

  Hi ! I am experiencing a strange issue with VS2010. We use TFS to build our API dlls and we used to reference them in our projects usign a mapped network drive that was fully trusted. We have been working like that for at least two years and everything worked perfectly. Today, I converted a webapp to vs2010 and when I compile it in Release, it's giving me: SGEN : error : Could not load file or assembly 'file:///L:\Api\Release API_20100521.1\Release\CS.API.Exceptions.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) The strange thing is that it's working when it's under the Debug profile... I tried adding the <runtime> <loadFromRemoteSources enabled="true" /> </runtime> into app.config and still no luck (See http://social.msdn.microsoft.com/Forums/en/msbuild/thread/d12f6301-85bf-4b9e-8e34-a06398a60df0 and http://msdn.microsoft.com/en-us/library/dd409252(VS.100).aspx) I am pretty sure that this issue is from visual studio or msbuild, as our code won't run from a network share when in prod because all the referenced dll's are copied into the bin folder. If anyone has an solution (or just an idea for a search path) please let me know !

  Read the article

• SCons does not clean all files

  - by meowsqueak

  I have a file system containing directories of "builds", each of which contains a file called "build-info.xml". However some of the builds happened before the build script generated "build-info.xml" so in that case I have a somewhat non-trivial SCons SConstruct that is used to generate a skeleton build-info.xml so that it can be used as a dependency for further rules. I.e.: for each directory: if build-info.xml already exists, do nothing. More importantly, do not remove it on a 'scons --clean'. if build-info.xml does not exist, generate a skeleton one instead - build-info.xml has no dependencies on any other files - the skeleton is essentially minimal defaults. during a --clean, remove build-info.xml if it was generated, otherwise leave it be. My SConstruct looks something like this: def generate_actions_BuildInfoXML(source, target, env, for_signature): cmd = "python '%s/bin/create-build-info-xml.py' --version $VERSION --path . --output ${TARGET.file}" % (Dir('#').abspath,) return cmd bld = Builder(generator = generate_actions_BuildInfoXML, chdir = 1) env.Append(BUILDERS = { "BuildInfoXML" : bld }) ... # VERSION = some arbitrary string, not important here # path = filesystem path, set elsewhere build_info_xml = "%s/build-info.xml" % (path,) if not os.path.exists(build_info_xml): env.BuildInfoXML(build_info_xml, None, VERSION = build) My problem is that 'scons --clean' does not remove the generated build-info.xml files. I played around with env.Clean(t, build_info_xml) within the 'if' but I was unable to get this to work - mainly because I could not work out what to assign to 't' - I want a generated build-info.xml to be cleaned unconditionally, rather than based on the cleaning of another target, and I wasn't able to get this to work. If I tried a simple env.Clean(None, "build_info_xml") after but outside the 'if' I found that SCons would clean every single build-info.xml file including those that weren't generated. Not good either. What I'd like to know is how SCons goes about determining which files should be cleaned and which should not. Is there something funny about the way I've used a generator function that prevents SCons from recording this target as a Clean candidate?

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >