Search Results

Search found 11930 results on 478 pages for 'shared machines'.

Page 163/478 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

  • decimal.TryParse() drops leading "1"

    - by Martin Harris
    Short and sweet version: On one machine out of around a hundred test machines decimal.TryParse() is converting "1.01" to 0.01 Okay, this is going to sound crazy but bare with me... We have a client applications that communicates with a webservice through JSON, and that service returns a decimal value as a string so we store it as a string in our model object: [DataMember(Name = "value")] public string Value { get; set; } When we display that value on screen it is formatted to a specific number of decimal places. So the process we use is string - decimal then decimal - string. The application is currently undergoing final testing and is running on more than 100 machines, where this all works fine. However on one machine if the decimal value has a leading '1' then it is replaced by a zero. I added simple logging to the code so it looks like this: Log("Original string value: {0}", value); decimal val; if (decimal.TryParse(value, out val)) { Log("Parsed decimal value: {0}", val); string output = val.ToString(format, CultureInfo.InvariantCulture.NumberFormat); Log("Formatted string value: {0}", output); return output; } On my machine - any every other client machine - the logfile output is: Original string value: 1.010000 Parsed decimal value: 1.010000 Formatted string value: 1.01 On the defective machine the output is: Original string value: 1.010000 Parsed decimal value: 0.010000 Formatted string value: 0.01 So it would appear that the decimal.TryParse method is at fault. Things we've tried: Uninstalling and reinstalling the client application Uninstalling and reinstalling .net 3.5 sp1 Comparing the defective machine's regional settings for numbers (using English (United Kingdom)) to those of a working machine - no differences. Has anyone seen anything like this or has any suggestions? I'm quickly running out of ideas... While I was typing this some more info came in: Passing a string value of "10000" to Convert.ToInt32() returns 0, so that also seems to drop the leading 1.

    Read the article

  • VMWare steals IP addresses [closed]

    - by Ishan Amin
    I'm having a peculiar problem, that I think I have narrowed down to VMware. For the past one year, every once in a while we lose internet connection and not all users (about 10 users) go down at the same time, its usually one-by-one. First someone will call me and say "Internet is down" and then we would go reset the router and modem and switch and it would be working again for a while, then go down again without any pattern or replicatable sequence. We'd go repeat the steps again to get everyone in the office running again. We called our Internet Service Provider and they constantly say, We see your modem and we see your router and from thier end everything is OK. we replaced our router and switch and modem, twice! Last friday, it dawned upon me, that everytime we turn on a VMware machine, this sequence of taking everyone down starts, which also explains the message that my users get for "IP Conflict Found" So we do alot of VMware testing and lo and behold, it takes my Internet down. My Yahoo and Gtalk would continue working but www is down when the VMware machines are started. I do use bridged networking to all the VMware machines, but I dont know what else to set it at. now, sorry for this long rambling but anyone have any clue on how to stop this? thanks IA

    Read the article

  • VB.net Saving an MetaFile / EMF as a bitmap ( .tiff)

    - by pehaada
    Currently I have a third party control that generates a Metafile. I can save the .wmf file to disk with out issue. The problem is how do I render the Metafile as a Tiff file. Currently I have the following code to get my metafile and save it. Dim mf As Metafile = page.GetImage(TXTextControl.Page.PageContent.All) Dim enhMetafileHandle As IntPtr = mf.GetHenhmetafile() Dim h As IntPtr Dim bufferSize As UInteger = GetEnhMetaFileBits(enhMetafileHandle, 0, h) Dim buffer(CInt(bufferSize)) As Byte GetEnhMetaFileBits(enhMetafileHandle, bufferSize, buffer) Dim msMetafileStream As New MemoryStream msMetafileStream.Write(buffer, 0, CInt(bufferSize)) Dim baMetafileData() As Byte baMetafileData = msMetafileStream.ToArray Dim g As Graphics = Graphics.FromImage(mf) mf.Dispose() File.WriteAllBytes("c:\a.wmf", baMetafileData) end sub _ Public Shared Function GetEnhMetaFileBits( ByVal hEMF As System.IntPtr, ByVal nSize As UInteger, ByVal lpData As IntPtr) As UInteger End Function <System.Runtime.InteropServices.DllImportAttribute("gdi32.dll", EntryPoint:="GetEnhMetaFileBits")> _ Public Shared Function GetEnhMetaFileBits(<System.Runtime.InteropServices.InAttribute()> ByVal hEMF As System.IntPtr, ByVal nSize As UInteger, ByVal lpData() As Byte) As UInteger End Function I've tried all sort of IMAGE and Graphic calls and just can't save the meta file as a .tiff. Any suggestions would be great. I even tried to create a new bitmap and draw the metafile onto it. I always end up with a GDI exception being thrown.

    Read the article

  • How to deal with recursive dependencies between static libraries using the binutils linker?

    - by Jack Lloyd
    I'm porting an existing system from Windows to Linux. The build is structured with multiple static libraries. I ran into a linking error where a symbol (defined in libA) could not be found in an object from libB. The linker line looked like g++ test_obj.o -lA -lB -o test The problem of course being that by the time the linker finds it needs the symbol from libA, it has already passed it by, and does not rescan, so it simply errors out even though the symbol is there for the taking. My initial idea was of course to simply swap the link (to -lB -lA) so that libA is scanned afterwards, and any symbols missing from libB that are in libA are picked up. But then I find there is actually a recursive dependency between libA and libB! I'm assuming the Visual C++ linker handles this in some way (does it rescan by default?). Ways of dealing with this I've considered: Use shared objects. Unfortunately this is undesirable from the perspective of requiring PIC compliation (this is performance sensitive code and losing %ebx to hold the GOT would really hurt), and shared objects aren't needed. Build one mega ar of all of the objects, avoiding the problem. Restructure the code to avoid the recursive dependency (which is obviously the Right Thing to do, but I'm trying to do this port with minimal changes). Do you have other ideas to deal with this? Is there some way I can convince the binutils linker to perform rescans of libraries it has already looked at when it is missing a symbol?

    Read the article

  • MSBuild "Wrapper" fails while VS2010 "Pure" compile succeeds for MFC application in CruiseControl.NE

    - by ee
    The Overview I am working on a Continuous Integration build of a MFC appliction via CruiseControl.net and VS2010. When building my .sln, a "Visual Studio" CCNet task (devenv) works, but a wrapper MSBuild script run via the CCNet MSBuild task fails with errors like: error RC1015: cannot open include file 'winres.h'.. error C1083: Cannot open include file: 'afxwin.h': No such file or directory error C1083: Cannot open include file: 'afx.h': No such file or directory The Question How can I adjust the build environment of my msbuild wrapper so that the application builds correctly? (Pretty clearly the MFC paths aren't right for the msbuild environment, but how do i fix it for MSBuild+VS2010+MFC+CCNet?) Background Details We have successfully upgraded an MFC application (.exe with some MFC extension .dlls) to Visual Studio 2010 and can compile the application without issue on developer machines. Now I am working on compiling the application on the CI server environment I did a full installation of VS2010 (Professional) on the build server. In this way, I knew everything I needed would be on the machine (one way or another) and that this would be consistent with developer machines. VS2010 is correctly installed on the CI server, and the devenv task works as expected I now have a wrapper MSBuild script that does some extended version processing and then builds the .sln for the application via an MSBuild task. This wrapper script is run via CCNet's MSBuild task and fails with the above mentioned errors My Assumptions This seems to be a missing/wrong configuration of include paths to standard header resources of the MFC persuasion I should be able to coerce the MSBuild environment to consider the relevant resource files from my VS2010 install and have this approach work. But how do I do that? Am I setting Environment variables? Registry settings? I can see how one can inject additional directories in some cases, but this seems to need a more systemic configuration at the compiler defaults level.

    Read the article

  • Enterprise Eclipse Provisioning - Or - How to share your standard Eclipse setup with other developer

    - by nikhil
    We use Eclipse as the IDE for developing all sorts of Java/J2EE applications in our 150 people odd IT department. One of the common problems we have been seeing is that developers download and install different versions of Eclipse and plugins based on their personal likes and dislikes. We have been trying to bring some consistency to this and have standardized on the version and the plugins that developers should be using. So the problem now is how do we distribute this installation to the team. We have zipped the directories and shared it through a shared drive. But I am looking for a better solution using some kind of provisioning tool for Eclipse using which people can install the IDE or get updates. Has anyone faced this problem? What are your solutions to this? How do you ensure a standard Eclipse environment across developers? I found Yoxos as a potential solution to this. Does anyone have any experience with it? Can p2 be used to do this?

    Read the article

  • Django 404 page not showing up

    - by Matthew Doyle
    Hey all, I'm in the middle of putting up my first django application on shared hosting. This should be an easy thing, but I am just not seeing it. I tried to follow the directions of the django documentation, and created a 404.html page within my template folder. I just wrote "This is a 404 page." in the .html file. I also did the same thing for a 500.html page and wrote in it "This is a 500 page." However when I hit a 'bad page' I get a standard 404 page from the browser (Oops! This link appears to be broken. in Chrome) when I would expect "This is a 404 page." What's even more interesting is out of frustration I wrote {% asdfjasdf %} in the 404.html, and instead of getting the "Oops!..." error I get "This is a 500 page," so it definitely sees the 404.html template. Here's what I can confirm: Debug = False I am running apache on a shared hosting I have not done anything special with .htaccess and 404 errors. If I run with Debug = True, it says it's a 404 error. I am using FastCGI Anything else anyone think I could try? Thank you very much!

    Read the article

  • In C#, what thread will Events be handled in?

    - by Ben
    Hi, I have attempted to implement a producer/consumer pattern in c#. I have a consumer thread that monitors a shared queue, and a producer thread that places items onto the shared queue. The producer thread is subscribed to receive data...that is, it has an event handler, and just sits around and waits for an OnData event to fire (the data is being sent from a 3rd party api). When it gets the data, it sticks it on the queue so the consumer can handle it. When the OnData event does fire in the producer, I had expected it to be handled by my producer thread. But that doesn't seem to be what is happening. The OnData event seems as if it's being handled on a new thread instead! Is this how .net always works...events are handled on their own thread? Can I control what thread will handle events when they're raised? What if hundreds of events are raised near-simultaneously...would each have its own thread? Thank in advance! Ben

    Read the article

  • Connecting to a network drive programmatically and caching credentials

    - by Chris Doggett
    I'm finally set up to be able to work from home via VPN (using Shrew as a client), and I only have one annoyance. We use some batch files to upload config files to a network drive. Works fine from work, and from my team lead's laptop, but both of those machines are on the domain. My home system is not, and won't be, so when I run the batch file, I get a ton of "invalid drive" errors because I'm not a domain user. The solution I've found so far is to make a batch file with the following: explorer \\MACHINE1 explorer \\MACHINE2 explorer \\MACHINE3 Then manually login to each machine using my domain credentials as they pop up. Unfortunately, there are around 10 machines I may need to use, and it's a pain to keep entering the password if I missed one that a batch file requires. I'm looking into using the answer to this question to make a little C# app that'll take the login info once and login programmatically. Will the authentication be shared automatically with Explorer, or is there anything special I need to do? If it does work, how long are the credentials cached? Is there an app that does something like this automatically? Unfortunately, domain authentication via the VPN isn't an option, according to our admin. EDIT: If there's a way to pass login info to Explorer via the command line, that would be even easier using Ruby and highline.

    Read the article

  • Receiving DB update events in .NET from SQLite

    - by Dan Tao
    I've recently discovered the awesomeness of SQLite, specifically the .NET wrapper for SQLite at http://sqlite.phxsoftware.com/. Now, suppose I'm developing software that will be running on multiple machines on the same network. Nothing crazy, probably only 5 or 6 machines. And each of these instances of the software will be accessing an SQLite database stored in a file in a shared directory (is this a bad idea? If so, tell me!). Is there a way for each instance of the app to be notifiied if one instance updates the database file? One obvious way would be to use the FileSystemWatcher class, read the entire database into a DataSet, and then ... you know ... enumerate through the entire thing to see what's new ... but yeah, that seems pretty idiotic, actually. Is there such a thing as a provider of SQLite updates? Does this even make sense as a question? I'm also pretty much a newbie when it comes to ADO.NET, so I might be approaching the problem from the entirely wrong angle.

    Read the article

  • Eclipse plugin installation/update issues

    - by The Elite Gentleman
    I've installed the following Team repository plugins (along with it's dependencies) for Eclipse Helios (using Eclipse updater). MercurialEclipse 1.7.1 Subclipse 1.6.17 Subversive SVN All of these are the latest in Eclipse Marketplace. My problem is when I go to Eclipse "Preferences", under "Team" I only see CVS but under Eclipse Marketplace, I can see that these plugins are installed (it gives me an option to uninstall it). How do I configure my Team repositories to reflect under "Team" in Preferences? Also, there is an update for "Eclipse IDE for Java EE developers, but when I try to update it, the following error occurs: Cannot complete the install because of a conflicting dependency. Software being installed: Eclipse IDE for Java EE Developers 1.3.2.20110301-1807 (epp.package.jee 1.3.2.20110301-1807) Software currently installed: Shared profile 1.0.0.1276787175574 (SharedProfile_epp.package.jee 1.0.0.1276787175574) Only one of the following can be installed at once: toolingepp.package.jee.configuration 1.3.2.20110301-1807 toolingepp.package.jee.configuration 1.3.0.20100617-0521 Cannot satisfy dependency: From: Shared profile 1.0.0.1276787175574 (SharedProfile_epp.package.jee 1.0.0.1276787175574) To: toolingepp.package.jee.configuration [1.3.0.20100617-0521] Cannot satisfy dependency: From: Eclipse IDE for Java EE Developers 1.3.2.20110301-1807 (epp.package.jee 1.3.2.20110301-1807) To: toolingepp.package.jee.configuration [1.3.2.20110301-1807] How do I solve it? Yes, I've spent days Googling for this issue but none solved my problem. Thanks in advance.

    Read the article

  • Looking for streaming xml pretty printer in C/C++ using expat or libxml2

    - by Mark Zeren
    I'm looking for a streaming xml pretty printer for C/C++ that's either self contained or that uses libxml2 or expat. I've searched a bit and not found one. It seems like something that would be generally useful. Am I missing an obvious tool that does this? Background: I have a library that outputs xml without whitespace all on one line. In some cases I'd like to pretty print that output. I'm looking for a BSD-ish licensed C/C++ library or sample code that will take a raw xml byte stream and pretty print it. Here's some pseudo code showing one way that I might use this functionality: void my_write(const char* buf, int len); PrettyPrinter pp(bind(&my_write)); while (...) { // ... get some more xml ... const char* buf = xmlSource.get_buf(); int len = xmlSource.get_buf_len(); int written = pp.write(buf, len); // calls my_write with pretty printed xml // ... error handling, maybe call write again, etc. ... } I'd like to avoid instantiating a DOM representation. I already have dependencies on the expat and libxml2 shared libraries, and I'd rather not add any more shared library dependencies.

    Read the article

  • Strange MSI error when setup.exe is run

    - by Martin Jackson
    We're using Visual Studio 2008's Setup Project to create an installer for our .NET 3.5 app. We host the .exe and .msi files on a website for our client to access, and produce new ones regularly to provide updates. This has all been fine until recently we've noticed some cases where installing via the .exe fails. The symptoms are: The .exe downloads fine, and runs fine. It appears to download the .msi successfully (the "downloading application files" step plods through happily), but then when it gets to the end of the "preparing to install" step, instead of launching the installer UI it pops up a message saying "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package". You'd think that the .msi is just corrupt or something, but running it explicitly (even downloading it from the same location as the .exe to do so) works just fine. This problem is occurring on just some of our machines, which are running a mixture of XP and Windows7. The only pattern I can see in those machines that experience the problem is that they tend to have had the application installed on them longer (i.e. updating the app rather than installing for the first time). It seems to me that it might be something to do with how/where the .exe downloads the .msi to, and perhaps different versions are conflicting there? Has anyone experienced this before? Does anyone know where the installer .exe puts the .msi that it downloads?

    Read the article

  • moving audio over a local network using GStreamer

    - by James Turner
    I need to move realtime audio between two Linux machines, which are both running custom software (of mine) which builds on top of Gstreamer. (The software already has other communication between the machines, over a separate TCP-based protocol - I mention this in case having reliable out-of-band data makes a difference to the solution). The audio input will be a microphone / line-in on the sending machine, and normal audio output as the sink on the destination; alsasrc and alsasink are the most likely, though for testing I have been using the audiotestsrc instead of a real microphone. GStreamer offers a multitude of ways to move data round over networks - RTP, RTSP, GDP payloading, UDP and TCP servers, clients and sockets, and so on. There's also many examples on the web of streaming both audio and video - but none of them seem to work for me, in practice; either the destination pipeline fails to negotiate caps, or I hear a single packet and then the pipeline stalls, or the destination pipeline bails out immediately with no data available. In all cases, I'm testing on the command-line just gst-launch. No compression of the audio data is required - raw audio, or trivial WAV, uLaw or aLaw encoding is fine; what's more important is low-ish latency.

    Read the article

  • Splitting MS Access Database - Front End Part Location

    - by kristof
    One of the best practices as specified by Microsoft for Access Development is splitting Access application into 2 parts; Front End that hold all the object except tables and the Back End that holds the tables. The msdn page links there to the article Splitting Microsoft Access Databases to Improve Performance and Simplify Maintainability that describes the process in details. It is recommended that in multi user environment the Back End is stored on the server/shared folder while the Front End is distributed to each user. That implies that each time there are any changes made to the front end they need to be deployed to every user machine. My question is: Assuming that the users themselves do not have rights to modify the Front End part of the application what would be the drawbacks/dangers of leaving this on the server as well next to the Back End copy? I can see the performance issues here, but are there any dangers here like possible corruptions etc? Thank you EDIT Just to clarify, the scenario specified in question assumes one Front End stored on the server and shared by users. I understand that the recommendation is to have FE deployed to each user machine, but my question is more about what are the dangers if that is not done. E.g. when you are given an existing solution that uses the approach of both FE and BE on the server. Assuming the the performance is acceptable and the customer is reluctant to change the approach would you still push the change? And why exactly? For example the danger of possible data corruption would definitely be the strong enough argument, but is that the case? It is a part of follow up of my previous question From SQL Server to MS Access 2007

    Read the article

  • parameter for xcodebuild for using latest sdk.

    - by Maciek Sawicki
    I using ant exec task to execute xcodebuild to build some iOS projects hudson. I would like to be able to crate script that way that allows not to specify sdk version, because after updating sdk on hudson slave or my iOS projects all my projects failing.... There is is nice option in xcode since sdk 4.2 in target setup Base SDK - Latest iOS and I don't have to provide -sdk param in xcodebuild command, but then (i think) it's taken from xcode project and it's bad because then some one can change target from simulator to device accidentally during commit. I need something that is constant. I will prefer not to use env variable because I would like to be able to run this ant task also on dev machines and would like not have to renember about setting it on all machines. Unfortunately xcodebuild -showsdk gives only: Mac OS X SDKs: Mac OS X 10.4 -sdk macosx10.4 Mac OS X 10.5 -sdk macosx10.5 Mac OS X 10.6 -sdk macosx10.6 iOS SDKs: iOS 4.2 -sdk iphoneos4.2 iOS Simulator SDKs: Simulator - iOS 3.2 -sdk iphonesimulator3.2 Simulator - iOS 4.0 -sdk iphonesimulator4.0 Simulator - iOS 4.1 -sdk iphonesimulator4.1 Simulator - iOS 4.2 -sdk iphonesimulator4.2 I need something like -sdk iphoneosLatest. My only idea is to pare output of xcodebuild -showsdk with some script, but I don't like this idea.

    Read the article

  • How to minimize total cost of shortest path tree

    - by Michael
    I have a directed acyclic graph with positive edge-weights. It has a single source and a set of targets (vertices furthest from the source). I find the shortest paths from the source to each target. Some of these paths overlap. What I want is a shortest path tree which minimizes the total sum of weights over all edges. For example, consider two of the targets. Given all edge weights equal, if they share a single shortest path for most of their length, then that is preferable to two mostly non-overlapping shortest paths (fewer edges in the tree equals lower overall cost). Another example: two paths are non-overlapping for a small part of their length, with high cost for the non-overlapping paths, but low cost for the long shared path (low combined cost). On the other hand, two paths are non-overlapping for most of their length, with low costs for the non-overlapping paths, but high cost for the short shared path (also, low combined cost). There are many combinations. I want to find solutions with the lowest overall cost, given all the shortest paths from source to target. Does this ring any bells with anyone? Can anyone point me to relevant algorithms or analogous applications? Cheers!

    Read the article

  • Troubleshooting failover cluster problem in W2K8 / SQL05

    - by paulland
    I have an active/passive W2K8 (64) cluster pair, running SQL05 Standard. Shared storage is on a HP EVA SAN (FC). I recently expanded the filesystem on the active node for a database, adding a drive designation. The shared storage drives are designated as F:, I:, J:, L: and X:, with SQL filesystems on the first 4 and X: used for a backup destination. Last night, as part of a validation process (the passive node had been offline for maintenance), I moved the SQL instance to the other cluster node. The database in question immediately moved to Suspect status. Review of the system logs showed that the database would not load because the file "K:\SQLDATA\whatever.ndf" could not be found. (Note that we do not have a K: drive designation.) A review of the J: storage drive showed zero contents -- nothing -- this is where "whatever.ndf" should have been. Hmm, I thought. Problem with the server. I'll just move SQL back to the other server and figure out what's wrong.. Still no database. Suspect. Uh-oh. "Whatever.ndf" had gone into the bit bucket. I finally decided to just restore from the backup (which had been taken immediately before the validation test), so nothing was lost but a few hours of sleep. The question: (1) Why did the passive node think the whatever.ndf files were supposed to go to drive "K:", when this drive didn't exist as a resource on the active node? (2) How can I get the cluster nodes "re-syncd" so that failover can be accomplished? I don't know that there wasn't a "K:" drive as a cluster resource at some time in the past, but I do know that this drive did not exist on the original cluster at the time of resource move.

    Read the article

  • Windows Azure ASP.NET MVC Role behaves strangely when redirecting from HTTP to HTTPS

    - by Rinat Abdullin
    Subj. I've got an ASP.NET 2 MVC Worker Role Application, that does not differ much from the default template. When attempting redirect from HTTP to HTTPS (this happens when we access constroller secured by the usual RequireSSL attribute implementation) we get blank page with "Bad Request" message. IntelliTrace shows this: Thrown: "The file '/Views/Home/LogOnUserControl.aspx' does not exist." (System.Web.HttpException) Call stack is really short: [External Code] App_Web_vfahw7gz.dll!ASP.views_shared_site_master.__Render__control1(System.Web.UI.HtmlTextWriter __w = {unknown}, System.Web.UI.Control parameterContainer = {unknown}) [External Code] App_Web_bsbqxr44.dll!ASP.views_home_index_aspx.ProcessRequest(System.Web.HttpContext context = {unknown}) [External Code] User control reference is the usual one in /Views/Shared/Site.Master: <div id="logindisplay"> <% Html.RenderPartial("LogOnUserControl"); %> </div> And partial view LogOnUserControl.ashx is located in Views/Shared (and it is ASHX, not ASPX). Problem shows up, when we try to access site pages, that require auth and redirect. These pages are secured by RequireSSL attribute (Redirect == true): [AttributeUsage(AttributeTargets.Method | AttributeTargets.Class, Inherited = true, AllowMultiple = false)] public sealed class RequireSslAttribute : FilterAttribute, IAuthorizationFilter { public bool Redirect { get; set; } // Methods public void OnAuthorization(AuthorizationContext filterContext) { // this get's messy, when we are running custom ports // within the local dev fabric. // hence we disable code in the debug #if !DEBUG if (filterContext == null) { throw new ArgumentNullException("filterContext"); } if (filterContext.HttpContext.Request.IsSecureConnection) return; var canRedirect = string.Equals(filterContext.HttpContext.Request.HttpMethod, "GET", StringComparison.OrdinalIgnoreCase); if (canRedirect && Redirect) { var builder = new UriBuilder { Scheme = "https", Host = filterContext.HttpContext.Request.Url.Host, Path = filterContext.HttpContext.Request.RawUrl }; filterContext.Result = new RedirectResult(builder.ToString()); } else { throw new HttpException(0x193, "Access forbidden. The requested resource requires an SSL connection."); } #endif } } Obviously we compile in RELEASE for this case. Does anybody have any idea, what could cause this strange exception and how to get rid of it?

    Read the article

  • Synchronizing files between Linux servers, through FTP

    - by Daniel Magliola
    I have the following configuration of servers: 1 central linux server, a VPS 8 satellite linux servers, "crappy shared hostings" I have a bunch of files that I need to have in all servers. Right now i'm copying them everywhere manually, but I want to be able to copy them to the central server, and then have a scheduled process that runs every now and then and synchronizes them (only outwardly, no need to try to find "new" files in the satellite servers). There are a couple of catches though: I can't have any custom software in the satellite servers, or do strange command line things that'll auto connect to them and send the files directly. I know this is the way these kinds of things are normally done, but the satellite servers are crappy shared hosting ones where I have absolutely no control over anything. I need to send the files over FTP I also need to have, in my central server, a list of the files that are available in each of the satellite servers, to make sure they are ready before I send traffic to them. If I were to do this manually, the steps would be: get the list of files in a satellite server compare to my own, and send the files that are missing get the list of files again, and store it in my central database. I'd like to know what tools are out there that can alleviate as much of this as possible, first the syncing, and then the "getting the list of files available in the other server". I'm going to be doing everything from PHP, not sure if there are good tools to "use FTP from PHP", which i'm pretty sure i'll have to do for step 3 at least. Thanks in advance for any ideas! Daniel

    Read the article

  • How to keep a trace of a record inside a nested repeater?

    - by Amokrane
    Hi, I have the following implementation: As you can see I have a repeater (listing the Machines) and a nested repeater (listing the WindowsServices inside each Machine). For each Windows Service I can perform an action using a button. However, to perform this action I need to know which Machine and which WindowsService are concerned. This is my code: protected void Page_Init(object sender, EventArgs e) { rptMachine.ItemDataBound += new RepeaterItemEventHandler(rptMachine_ItemDataBound); } protected void Page_Load(object sender, EventArgs e) { // bind the Machine repeater rptMachine.DataSource = _monitoringService.Machines; rptMachine.DataBind(); } protected void rptMachine_ItemDataBound(object sender, RepeaterItemEventArgs e) { if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem) { Repeater nestedRepeater = (Repeater) e.Item.FindControl("rptWindowsService"); nestedRepeater.DataSource = ((IMachine) e.Item.DataItem).WindowsServices; nestedRepeater.DataBind(); Button btnActionInner = null; // bind the action button situated inside the nested repeater foreach(RepeaterItem ri in nestedRepeater.Items) { if((Button)ri.FindControl("btnAction") != null) { btnActionInner = (Button) ri.FindControl("btnAction"); btnActionInner.CommandName = "ActionState"; btnActionInner.CommandArgument = strWindowsService; } } } } protected void rptWindowsService_ItemCommand(object source, RepeaterCommandEventArgs e) { // do the specific action stop/run for the windows service if (e.CommandName == "ActionState") { if(((Button)(e.CommandSource)).Text.Equals("Stop")) { } else if(((Button)(e.CommandSource)).Text.Equals("Run")) { } } } } } So basically I need to know (inside rptWindowsService_ItemCommand) what is the pair that is concerned by the operation. What's the best way to do that? Don't hesitate to ask for more clarifications! Thanks

    Read the article

  • Theory of formal languages - Automaton

    - by dader51
    Hi everybody ! I'm wondering about formal languages. I have a kind of parser : It reads à xml-like serialized tree structure and turn it into a multidimmensionnal array. I figured out that i need at least three variables to achieve the job : $tree = array(); // a new array $pTree = array(&$tree); // a new array which the first element points to $tree; $deep = 0; plus the one containing the sentence splitted into words. My point is on the similarities between the algorithm deing used and the differents kinds of automatons ( state machines turing machines stack ... ). The $words variable is the "tape" of the automaton, the test/conditions of the algorithm are transitions, $deep is the state and $tree is the output. I cannont figure what is $pTree. So the question is : which is the automaton I implictly use here, and to which formal languages family does it fit ? And what's about recursion ?

    Read the article

  • Creating/Maintaining a large project-agnostic code library

    - by bufferz
    In order to reduce repetition and streamline testing/debugging, I'm trying to find the best way to develop a group of libraries that many projects can utilize. I'd like to keep individual executable relatively small, and have shared libraries for math, database, collections, graphics, etc. that were previously scattered among several projects and in many cases duplicated (bad!). This library is to be in an SVN repo and several programmers will be working on it. This library will be in constant development along with the executables that utilize it. For example, I want a code file in ProjectA to look something like the following: using MyCompany.Math.2D; //static 2D math methods using MyCompany.Math.3D; //static #D math methods using MyCompany.Comms.SQL; //static methods for doing simple SQLDB I/O using MyCompany.Graphics.BitmapOperations; //static methods that play with bitmaps So in my ProjectA solution file in VisualStudio, in order to develop/debug the MyCompany library I have to add several projects (Math, Comms, Graphics). Things get pretty cluttered and Solution files get out of date quickly between programmer SVN commits. I'm just looking for a high level approach to maintaining a large, shared code base in an SCN repository. I am fully willing to radically redesign my approach. I'm looking for that warm fuzzy feeling you get when you're design approach is spot on and development is fluid and natural. And ideas? Thanks!!

    Read the article

  • How to recursive rake? -- or suitable alternatives

    - by TerryP
    I want my projects top level Rakefile to build things using rakefiles deeper in the tree; i.e. the top level rakefile says how to build the project (big picture) and the lower level ones build a specific module (local picture). There is of course a shared set of configuration for the minute details of doing that whenever it can be shared between tasks: so it is mostly about keeping the descriptions of what needs building, as close to the sources being built. E.g. /Source/Module/code.foo and cie should be built using the instructions in /Source/Module/Rakefile; and /Rakefile understands the dependencies between modules. I don't care if it uses multiple rake processes (ala recursive make), or just creates separate build environments. Either way it should be self-containable enough to be processed by a queue: so that non-dependent modules could be built simultaneously. The problem is, how the heck do you actually do something like that with Rake!? I haven't been able to find anything meaningful on the Internet, nor in the documentation. I tried creating a new Rake::Application object and setting it up, but whatever methods I try invoking, only exceptions or "Don't know how to build task ':default'" errors get thrown. (Yes, all rakefiles have a :default). Obviously one could just execute 'rake' in a sub directory for a :modulename task, but that would ditch the options given to the top level; e.g. think of $(MAKE) and $(MAKEFLAGS). Anyone have a clue on how to properly do something like a recursive rake?

    Read the article

  • Converting Makefile to Visual Studio Terminology Questions (First time using VS)

    - by Ukko
    I am an old Unix guy who is converting a makefile based project over to Microsoft Visual Studio, I got tasked with this because I understand the Makefile which chokes VS's automatic import tools. I am sure there is a better way than what I am doing but we are making things fit into the customer's environment and that is driving my choices. So gmake is not a valid answer, even if it is the right one ;-) I just have a couple of questions on terminology that I think will be easy for an experienced (or junior) user to answer. Presently, a make all will generate several executables and a shared library. How should I structure this? Is it one "solution" with multiple projects? There is a body of common code (say 50%) that is shared between the various executable targets that is not in a formal library, if that matters. I thought I could just set up the first executable and then add targets for the others, but that does not seem to work. I know I am working against the tool, so what is the right way? I am also using Visual C++ 2010 Express to try and do this so that may also be a problem if support for multiple targets is not supported without using Visual C++ 2010 (insert superlative). Thanks, this is really one of those questions that should be answerable by a quick chat with the resident Windows Developer at the water cooler. So, I am asking at the virtual water cooler, I also spring for a virtual frosty beverage after work.

    Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >