Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 163/693 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Networking 2 Virtual PC with one VPC as DHCP server

  - by vivek

  My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

  Read the article

• How do I install the main repositories for RHEL6

  - by eisaacson

  We've setup RHEL6 on a new server. As far as we can tell, our subscription is all setup properly. However, when I run yum repolist, it doesn't show any repositories. /etc/yum.repos.d/redhat.repo is empty. I tried pasting in the content from another RHEL6 server's redhat.repo but as soon as I run yum, it wipes it out again. I just need to get the basic RedHat repositories setup so I can install packages. EDIT: Using the GUI, I went to System Administration Red Hat Subscription Manager. Under the 'Products' tab, it did not show any products. EDIT: When I run yum update, here's what I get: # yum update Loaded plugins: product-id, refresh-packagekit, security, subscription-manager This system is receiving updates from Red Hat Subscription Management. Setting up Update Process No Packages marked for Update When I log in to RedHat customer portal, it shows that subscription as active. EDIT: To make sure I wasn't having a subscription issue. I re-registered and re-subscribed. I get all the same results. # subscription-manager register --force # subscription-manager subscribe --pool=*redacted* EDIT: contents of /etc/yum.conf [main] cachedir=/var/cache/yum/$basearch/$releasever keepcache=0 debuglevel=2 logfile=/var/log/yum.log exactarch=1 obsoletes=1 gpgcheck=1 plugins=1 installonly_limit=3 contents of /etc/yum/pluginconf.d/rhnplugin.conf: [main] enabled = 0 gpgcheck = 1

  Read the article

• Configuring apache and php to handle many connections

  - by Marc

  My preliminary setup is like this. Two QuadCore 8GB servers running debian 6, with php and apache, One QuadCore 16GB server running debian 6, with mysql My plan is to have one 8Gb server to act as a proxy server, using vertx java to handle connections. I will let vertx use HttpClient to send web requests to the second 8GB server. This would have apache installed and use php to deliver any information that it gets from the mysql server on the third, 16GB server. The main reason I want this setup is to have things separated, so the "proxy" will be the only way to access the system, as the other two server will only be reachable from the local network. I can have the vertx proxy handle 5000+ concurrent connections, but, I don't know how to configure apache to handle all the requests coming from the proxy. Php will connect over mysqli with persistent connection pool of 500-800 connections, the mysql server seems not to have any issues on this part. In previous projects, the apache part was always causing issues, no matter how I set it up. I might not fully understand how to setup apache, since normally apache should handle many concurrent connections, but it does seem to now.

  Read the article

• Login to OS X Server User Account from Local Computer

  - by Brod Wilkinson

  I have OS X Server installed on a mac mini. I've created several User accounts, one of which is Account Name: Bob Password: abc123 From the Mac Mini's login screen I can choose "Server" (main account) "Bob" (Bobs account) and "Other..." OS X Server Accounts, from "Other..." if I input Bobs credentials it will log me in. I also have a macbook air, I would like to be able to select from the Login Screen "Other..." input Bobs credentials and have it login to Bobs account, or any other User Account for that matter. My Server is setup as private with the server address: server.network.private Following some googled instructions as well as apples very own instructions I have: Setup an Open Directory with Username: diradmin Password: abc123 Then on the macbook air gone into System Preferences > Users & Groups > Login Options and clicked Join next to Network Account Server, input my server (server.network.private) with diradmin credentials and its connected. Great. I've also ticked Allow Network Users to Login and Login Window and selected All Users. I was assuming this would allow my macbook air to login to the "Bob" account by selecting "Other..." from the login window although there is no "Other..." option. I then setup a VPN, basic credentials, logged into it on the macbook air and still not much has changed. I am able to share screens with the "Bob" account form my macbook air by logging in by clicking Share Screen... from the Finder under Shared > Network Server and then clicking Login In but this obviously requires the macbook air to already be logged into an account before it can share screens which is not suitable. Is there any way to simply login to the OS X Server User Account from the macbook air's login screen via the "Other..." like it does on the mac mini's login screen? Thanks in advance. Operating System: OS X 10.9 Mavericks OS X Server: Version 3

  Read the article

• Windows 8 & Hyper-V Can't Bridge Wifi Connection

  - by xinunix

  So I have an odd issue that I can't quite figure out... I am running Windows 8 Enterprise on a Dell 6420 laptop. I have a Broadcom 802.11n wireless adapter. I am connected to an home router (Netgear WNDR3700) that is connected to the internet. It is a very simple home network setup. I am trying to stand-up a few VMs in Hyper-V and want the VMs to be able to access the internet over my wireless connection. I have found numerous examples of how to set this up using both External and Internal Virtual Switches but have yet to be able to get it to work on my machine. I have narrowed the issue down to the fact that my host machine always loses internet connection when I bridge my wifi connection (both when it is bridged automatically by windows when I setup an external virtual switch bound to the wifi adapter or if I do it manually by creating an internal virtual switch, right click on it and my wifi network and select "Bridge Connections".) In both cases after the bridge is established, my host machine can no longer connect to the internet. I am not sure where to start with troubleshooting this problem. After the bridge is setup, an ipconfig shows all netowrk devices on the machine as "Media Disconnected". I do know that the wireless adapter is connected to the router b/c it shows the connection as active and full-strength. The only thing I can possibly think of is that this machine also has the Cisco VPN client installed on it which installs a Cisco Virtual Network Adapter. Is it possible that this Cisco Virtual Adapter is causing me issues when I try to bridge? I saw some people had a similar issue with a VirtualBox virtual adapter when trying to share via Hyper-V. Any thoughts or suggestions on how to troubleshoot?

  Read the article

• OSX: Mimic Ubuntu IP Masquerading via iptables with ipfw

  - by Dogbert

  Good day, I am attempting to replicate a setup I have between a router and an Ubuntu PC, and have the same setup working on my MacBook (10.6, Snow Leopard). First, I have a router that has a USB port. When I plug it into my Ubuntu PC, it creates an RNDIS connection, allowing me to connect to the router over the USB cable via an IP connection. When I plug it into my computer via USB, it gets assigned an IP address of 172.16.84.1, and a new adapter appears when I type ifconfig. I can then SSH into the device via ssh [email protected]. When I log in to the device, I flush the routes, then create the default route: admin@localhost> route -f admin@localhost> route add default 172.16.84.2 Now, in my Ubuntu machine, I use iptables to enable IP masquerading: root@Valhalla> sudo iptables -t nat -A POSTROUTING -s 172.16.84.2 -j MASQUERADE Once this is all done, the router has internet access over the USB connection to my PC. I am trying to replicate this exact setup on my MacBook now (Snow Leopard), but iptables does not exist for OSX, not even a Macports version exists. I have scoured through other questions on StackOverflow that cover the usage of the ipfw command, which apparently works as a drop-in replacement for iptables. However, the syntax is significantly different, and I'm pretty much lost. Does anyone with some experience with ipfw have some suggestions on how I could accomplish this and create a NAT connection via IP masquerading like I could with my Ubuntu PC? Thank you for your assistance.

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

  - by Sid

  I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

  Read the article

• Microsoft Office 2003 applications crash on 'Save As' to a network mapped drive

  - by Archit Baweja

  Hey guys, so I'm not sure if it belongs on ServerFault forums so figured I'd ask here first because its a workstation/client side issue. I have a client where we have windows server 2003 setup, with windows xp professional setup on all the workstations. We've setup a 'domain' and all workstations logon to the domain (authenticated by the Windows Domain Controller), and in the logon script we map drives on to each workstation. Everything is working peachy except for one workstation, where when I open a file in excel from a mapped drive, it opens fine, but when I go to hit Save As, the Save As dialog pops and hangs up. I cannot perform any other action in excel. When I try cancel the Save As dialog, excel crashes. The mapped drive opens up fine in Windows Explorer. To further investigate this issue, I created a new blank text document on the network drive in Windows Explorer. I then opened it. Then hit save as, and the Save As dialog opened up fine and it would let me save the document. I repeated the above steps for a word document. However this time the Save As dialog hung/froze again. So I'd imagine its a Microsoft Office Issue. Any ideas?

  Read the article

• Windows Server 2008 R2 DNS - One IP, multiple servers

  - by Blu Dragon

  I need opinions and examples on how to best to accomplish the setup I am looking for. I have a public-facing AD domain server with one public IP address. I have setup an external zone for example.com and I successfully have my own name servers pointing to it at ns0.example.com and ns1.example.com. I also have an internal zone for my private network at home.example.com. I am behind a router with the domain server in the DMZ. I want dev.example.com to be accessible from the outside world over https and to point to internal IP address 192.168.1.78. Likewise, I want www.example.com to be accessible from the outside world and point to internal IP address 192.168.1.79. Both dev and www servers are CentOS 5.6 VMs running inside of Hyper-V on the domain server (bad idea I know but I am limited on hardware atm). What is best way to achieve this? From what I have read and researched on Google, I may need to setup a reverse proxy but I am not sure how well that will work with SSL.

  Read the article

• Will having 2 MX records pointing to different mail server types cause delivery issues?

  - by Lyken

  I've inherited a setup where the mail server is exchange 2010. For some reason, I'm not sure why there is 2 MX records setup. One being the exchange server which is the higher priority while the external (non-exchange) server is the secondary mx record. I don't believe this was done for redundancy reasons as the other mail server is not set to route mail back to the exchange server (it's just the webhosts email for their hosting) The client has been experiencing disappearing email, however after my investigations its not actually disappearing, but exchange is successfully receiving the mail and then passing it on to the external server. It isn't happening all the time, just with some email messages from some domains. My question: Is exchange passing the mail on because it can see the secondary MX record and is configured (somewhere) to send mail out? If so, how do I stop it? Is it as easy as just removing the second MX record pointing to the external mail server and exchange will stop passing mail on? I'm not exchange expert so I'm kinda stumped. Exchange MX tools are saying everything is setup and configured correctly from an external point of view.

  Read the article

• Nginx proxy with Redmine SVN authentication.

  - by Omegaice

  I am attempting to setup a system where I have an nginx server running as a reverse proxy for multiple websites that I want to run. To separate the websites I have created a Linux container which contains each site to allow me to reduce conflicts in database usage etc. I am currently trying to get my main site working and have nginx with passenger setup and connecting to redmine and I have an Apache install specifically setup for serving the SVN over HTTP and am attempting to use the redmine authentication with that. I have set everything up as described in the redmine howtos, but when I check a project out from the SVN it always works even if the project is private and whenever I try and commit to the repositories it fails saying "Could not open the requested SVN filesystem", the Apache error log related to that event is "(20014)Internal error: Can't open file '/srv/rcs/svn/error/format': No such file or directory". If I take out the redmine authentication I can checkout and check-in repositories fine but there is no authentication. Does anyone have any ideas? Edit I tried to solve this problem another way by attempting to have the authentication work by LDAP, I managed to get it so that my user could log into the redmine website but as soon as I tried to check anything out it said that access was forbidden to the repository.

  Read the article

• error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

  - by BabakBani

  We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• Why are my socks proxies slow

  - by vps_newcomer

  I have a linux vps, and i have tried a few socks proxy setups to test their performance: All tests were using speedtest.net The standard ssh tunnel proxy 0.8mbit/s download and 0.1-0.2mbit/s upload speeds dante-server proxy 1.3mbit/s download and 0.4-0.5mbit/s upload I am wondering why are these speeds so slow? Is anything shaping them? Is it just the nature of socks proxies? I know that the ssh tunnel has to do encryption and what not so that is why its slow, but i was surprised to see that the second setup was also quite slow. On the VPS i have received download speeds of 25MB/s per second (thats about 200mbit/s and upload speed of atleast 5MB/s (haven't got a good enough pipe to test anything faster). The other option i was going to try is to setup OpenVPN and see how that goes, however i need to find a good tutorial as it's fairly complicated to setup. So why is it so slow? How can i test to see where the bottleneck is? How can i make it faster :D

  Read the article

• Advance DNS - Redirecting Emails to new webhost

  - by Martin

  I am not to sure if this question belongs here but I will surely find out soon enough. I have two web hosts (Not sure why it has been setup this way but it has). I do not want to use the original web host to handle the emails as the Data that we get from them is 500 mb which is already full with hosting the website. The second web host has an unlimited data plan and was created so we could use this host for the email accounts. Now the problem is I have reset the Advance DNS Zone records on both accounts and I am not sure what they were before. (Silly me should have taken a backup of how it was setup before hand I know) Emails were working before and going to the second hosts server now they are going to the first host but it has no email addresses setup for use so all emails are bouncing saying that the address does not exist. Host 1 IP: 192.185.96.110 Host 2 IP: 27.54.88.66 So far I have changed the Advanced DNS Zone record on Host 1 with the following: A Record: mail.australisinstitute.qld.edu.au - 27.54.88.66 I have not made any changes on Host 2 and both hosts have the default MX Records. If I need to provide any more information I can but I just hope someone can decipher what I have said haha. Cheers in advance!

  Read the article

• GnuPG Command Line - Verifying KeePass Signature

  - by Stisfa

  I'm trying to verify the PGP Signature of the latest version of KeePass 2.14's setup file against this signature, but this is the output I receive: C:\Program Files (x86)\GNU\GnuPG>gpg.exe --verify C:\Users\User\Desktop\KeePass-2.14-Setup.exe gpg: no valid OpenPGP data found. gpg: the signature could not be verified. Please remember that the signature file (.sig or .asc) should be the first file given on the command line. C:\Program Files (x86)\GNU\GnuPG> I found this command here, but it made no mention about ".sig" or ".asc" files, so I figured I did something wrong. By reading (http://www.gnupg.org/documentation/manuals/gnupg/gpgv.html#gpgv), I further tried the following: C:\Program Files (x86)\GNU\GnuPG>gpg.exe --pgpfile C:\Users\User\Desktop\KeePass-2.14-Setup.exe gpg: Invalid option "--pgpfile" C:\Program Files (x86)\GNU\GnuPG> As you can see, the results are quite obfuscating... I took a look at this on SuperUser (http://superuser.com/questions/16160/short-easy-to-understand-explanation-of-gpg-pgp-for-nontechnical-people - I couldn't use "a href" due to the built in spam filter that discriminates against users with < 10 rep; this is the same reason for the link above this link), but none of the links seemed to really address my question, at least not directly enough for me to get any idea on how to move forward on this. Can anybody here help me with the esoteric technicality of OpenPGP & the associated use of the GnuPG program? I've felt pretty dumb learning VBS, but this is beyond humiliating: it's absolutely debilitating and maiming whatever confidence I had with my IT skills (then again, I have no justification for making any boast either, as I have yet to get my A+ Cert, lol).

  Read the article

• Media Center - TV constantly pauses 1/2 second then plays 1 second

  - by Bob

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing. I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card, ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Configure an Azure VM for Dynamic DNS for Cloud Services

  - by Adam

  I am trying to setup an azure VM with proper DNS to allow multiple cloud services to communicate across cloud service boundaries. As I understand it, I need to provide my own DNS server. I do not have any on-premise infrastructure, so I am trying to configure an Azure VM to act as my DNS. This SO question (http://stackoverflow.com/questions/21858926/azure-how-to-connect-one-cloud-service-with-other-in-one-virtual-network) is very similar to my setup. This article (http://msdn.microsoft.com/en-us/library/windowsazure/jj156088.aspx) describes my particular case: Name resolution between virtual machines and role instances located in the same virtual network, but different cloud services Here is what I have done: Created Azure Virtual Network and declared subnets for each of my cloud services. Created an Azure VM (Windows 2012 R2) with DNS enabled RDP to the VM and enabled the DNS role and installed features Added the appropriate NetworkConfiguration xml section to each of my cloud services .csfg files Re-deployed my cloud services I have verified that I setup the virtual network and networkconfiguration properly because my cloud service hosts are able to communicate with each other if I use the internal ips. However, name resolution doesn't appear to be working, and it doesn't appear that my cloud service roles can communicate with my DNS server. How do I configure my VM so that my different cloud services roles register themselves with my DNS server? EDIT: I think I am 1 step closer to getting this to work. The cloud services that I was using are in an old affinity group which is not supported by VMs, so I was unable to add my VM into my virtual network. I created a new VNET in a new affinity group with my VM added into it. However, I still don't know how to configure the azure VM's DNS server so that the cloud services register themselves for name resolution. Also, an added bonus guaranteed to get a +1 would be to explain if it is possible to register a DNS entry for the VIP for an internal endpoint of my cloud services so we can get load balancing. Thanks!

  Read the article

• Need to Remove Exchange 2003 Server That Crashed During Transition to 2010

  - by ThaKidd

  As the title stated, we were running an Exchange 2003 server that we knew was going down soon so we purchased a second server and installed Exchange 2010 into the AD. We managed to move all of the mailboxes off of 2003 and also managed to get the Offline Address Book setup on 2010. At this point the 2003 server bit the dust and will no longer boot. Therefore we were unable to properly uninstall Exchange and remove the last 2003 server so it still exists in AD. As far as the clients are concerned, everything is working properly. However, when I run the Microsoft Exchange Profile Analyzer, I still see the old server and its Administrative Group. I am going to guess that since the old server is showing up in AD, I will not be able to raise Exchange or AD functionality (as the 2003 server was also the only AD DC) levels. I have forced the 2003 DC out of AD so that is no longer an issue. Old Setup: Windows 2003 Server Enterprise & Exchange 2003 Standard New Setup: Windows 2010 Server Enterprise & Exchange 2010 Standard Two Questions: How do you go about manually forcing the 2003 server and its administrative group out of AD? When that is finished, where do you raise the Exchange mode (can't find this for the life of me)?

  Read the article

• Setting up Mako with Cherrypy on nginx through FastCGI

  - by xuniluser

  I'm trying to use TemplateLookup from Mako, but can't seem to get it to work. Layout of the test site is: /var/www main.py templates/ index.html Nginx's config is setup as: location / { fastcgi_pass 127.0.0.1:8080; fastcgi_param SERVER_NAME $server_name; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; } Cherrypy's config has: [global] server.socket_port = 8080 server.thread_pool = 10 engine.autoreload_on = False tools.sessions.on = True A simple cherrypy setup in main.py seems to work fine. import cherrypy class Main: @cherrypy.expose def index(self): return 'Hello' cherrypy.tree.mount(Main(), '/', config='config') Now, if I modify this to use Mako's template lookup, I get a 500 error. I know it has something to do with serving static files, but I've tried over a dozen different configurations accoring to the cherrypy wiki, but none of them work. Here's a bare setup I have for the templates: import cherrypy from mako.template import Template from mako.lookup import TemplateLookup templates = TemplateLookup(directories=['templates'], output_encoding='utf-8') class Main: @cherrypy.expose def index(self): return templates.get_template('index.html').render(msg='hello') cherrypy.tree.mount(Main(), '/', config='config') Does anyone know how I can get this to work ?

  Read the article

• Misconfigured external monitor on Mac OS X Snow Leopard 10.6.3

  - by Mike

  I have an external monitor (specifically, an HDTV) hooked up to my 2.53GHz 13" macbook pro. This display works fine and I use it with my mac in clamshell mode (eg. with an external keyboard/mouse and the laptop closed and the built-in mac screen turned off) My Mac has multiple users on it. For User A I can use the mac with the external monitor in both clamshell and dual-monitor setups. For User B, I can use the monitor in a dual-monitor setup, but whenever I switch to clamshell mode the Mac switches to an incorrect output resolution or frequency setting that my HDTV doesn't recognize, resulting in a blank screen and a message about Unsupported Resolution. Chances are I did this to myself by misconfiguring my display settings at some point in the past, but I have no idea how to undo it. I (obviously) can't seen the display to change the settings when it's borked. I can see the display settings if I switch to Dual-monitor mode, but those settings only affect the dual monitor setup; no matter how I change the settings in dual-monitor mode, the clamshell mode setup remains borked. How can I dig myself out of this hole?

  Read the article

• debian VM refusing all traffic apart from http

  - by james lewis

  I've got a VM with a fresh install of Debian (wheezy) and I've installed node and mongo on it. The VM is using a bridged network connection so I was expecting to be able to point my host machines browser at the ip address of the Debian VM (port 1337 for my node example or port 28017 for my mongo status page) and see one of the two services (node or mongo). My requests are refused though. As far as I can tell Debian allows all traffic by default and you have to manually configure iptables to drop traffic. I've checked iptables and it says it's setup to allow anything through. It looks like this: root@devbox:/home/jlewis# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination As a test I setup nginx and I was able to get to the nginx landing page from my host no problems so obviously http traffic is allowed. I then set nginx up to forward all traffic upstream to mongo - no problems there, I was able to see the status page. I then did the same for my example node server and again, no problems. So http traffic is fine, but all other traffic is blocked. Anyone know why debian might be refusing all other traffic other than iptables being setup to drop it? EDIT - output from netstat -nltp: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:28017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:51028 0.0.0.0:* LISTEN 1541/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2462/sshd tcp 0 0 127.0.0.1:1337 0.0.0.0:* LISTEN 2794/node tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2274/exim4 tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1510/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2189/nginx tcp6 0 0 :::22 :::* LISTEN 2462/sshd tcp6 0 0 :::45335 :::* LISTEN 1541/rpc.statd tcp6 0 0 ::1:25 :::* LISTEN 2274/exim4 tcp6 0 0 :::111 :::* LISTEN 1510/rpcbind

  Read the article

• apache2 mysql authentication module and SHA1 encryption

  - by Luca Rossi

  I found myself in a setup on where I need to enable some authentication method using mysql. I already have an user scheme. That user scheme is working like a charm with MD5 password and CRYPT, but when I turn to SHA1sum it says: [Fri Oct 26 00:03:20 2012] [error] Unsupported encryption type: Sha1sum No useful debug informations on log files. This is my setup and some info: debian6 apache and ssl installed packages: root@sistemichiocciola:/etc/apache2/mods-available# dpkg --list | grep apache ii apache2 2.2.16-6+squeeze8 Apache HTTP Server metapackage ii apache2-mpm-prefork 2.2.16-6+squeeze8 Apache HTTP Server - traditional non-threaded model ii apache2-utils 2.2.16-6+squeeze8 utility programs for webservers ii apache2.2-bin 2.2.16-6+squeeze8 Apache HTTP Server common binary files ii apache2.2-common 2.2.16-6+squeeze8 Apache HTTP Server common files ii libapache2-mod-auth-mysql 4.3.9-13+b1 Apache 2 module for MySQL authentication ii libapache2-mod-php5 5.3.3-7+squeeze14 server-side, HTML-embedded scripting language (Apache 2 module) root@sistemichiocciola:/etc/apache2/sites-enabled# dpkg --list | grep ssl ii libssl-dev 0.9.8o-4squeeze13 SSL development libraries, header files and documentation ii libssl0.9.8 0.9.8o-4squeeze13 SSL shared libraries ii openssl 0.9.8o-4squeeze13 Secure Socket Layer (SSL) binary and related cryptographic tools ii openssl-blacklist 0.5-2 list of blacklisted OpenSSL RSA keys ii ssl-cert 1.0.28 simple debconf wrapper for OpenSSL my vhost setup: AuthMySQL On Auth_MySQL_Host localhost Auth_MySQL_User XXX Auth_MySQL_Password YYY Auth_MySQL_DB users AuthName "Sistemi Chiocciola Sezione Informatica" AuthType Basic # require valid-user require group informatica Auth_MySQL_Encryption_Types Crypt Sha1sum AuthBasicAuthoritative Off AuthUserFile /dev/null Auth_MySQL_Password_Table users Auth_MYSQL_username_field email Auth_MYSQL_password_field password AuthMySQL_Empty_Passwords Off AuthMySQL_Group_Table http_groups Auth_MySQL_Group_Field user_group Have I missed a package/configuration or something?

  Read the article

• Windows Virtual Machines will not run

  - by jlego

  I'm trying to setup a few virtual machines to use for testing websites in the various old versions of IE. I had Microsoft Virtual PC working on an older machine using XP mode and 2 other VHD's from Microsoft that allowed me to test in IE6-IE8. I've recently gotten a new work machine and am trying to set up the VMs again for testing, however nothing seems to be working. Both the old and the new system run Windows 7 64-bit Ultimate with AMD processors. I downloaded Virtual PC & XP mode from here http://www.microsoft.com/windows/virtual-pc/download.aspx and go through the installation process. XP mode is installed, but when I try to run it it goes through the initial setup process only to fail when it is almost complete with the error "Cannot Complete Setup". (After googling I see that this might be a conflict with my processor) I download other VHD's from here http://www.microsoft.com/windows/virtual-pc/download.aspx in order to get the other versions of IE and try to set those up in Virtual PC as well. I click on them to start the machine and both Windows 7 with IE8 and Windows Vista with IE7 just hang at a black screen. I try to use Virtual Box instead, and I get Windows XP with IE6 running, but I have no internet connection in the VM. I try all different settings and try to google the correct settings but nothing seems to work. When I load the VM, XP shows that its found new hardware but it needs the drivers. One of these pieces of hardware is the network adapter, but I can't connect to the internet to download the driver in the guest OS. VirtualBox tells me I need to install extensions in order for things to function properly. I go through the installation process in the guest OS and restart the VM, however now XP is asking for validation and I can't access the VM. I try installing the other 2 OS (Vista & 7) but I get a BSOD right after the startup screen appears and the VM restarts itself. I'm getting so frustrated trying to make this work, I would really appreciate any assistance on getting the VMs up and running or any alternatives for testing websites in Internet Explorer.

  Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >