Search Results

Search found 5419 results on 217 pages for 'warning'.

Page 163/217 | < Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >

  • Cannot change PostgreSQL port

    - by Jerec TheSith
    I run Postgresql 8.4 as a service on a CentOS 6.2 server. I set port = 21444 and listen_addresses = '*' in /var/lib/pgsql/data/postgresql.conf and I changed 5432 to 21444 in postmaster.opts and restarted postgres, but when I run netstat -lntp postgresql is still running on port 5432 tcp 0 0 0.0.0.0:5432 0.0.0.0:* LISTEN 20276/postmaster When I restart postgresql I get a writting error warning on /proc/self/oom_adj, but the service starts anyway. I read that we could get this error when using virtualized servers, but I don't really know if this has inpact on postgresql listening port. The correct pgsql config file is loaded in /var/lib/pgsql/data : [root@srv02 ~]# ps -ef | grep postgres root 1358 22140 0 09:42 pts/0 00:00:00 grep postgres postgres 9519 1 0 Mar16 ? 00:00:01 /usr/bin/postmaster -p 5432 -D /var/lib/pgsql/data postgres 9573 9519 0 Mar16 ? 00:00:00 postgres: logger process postgres 9575 9519 0 Mar16 ? 00:00:05 postgres: writer process postgres 9576 9519 0 Mar16 ? 00:00:03 postgres: wal writer process postgres 9577 9519 0 Mar16 ? 00:00:01 postgres: autovacuum launcher process postgres 9578 9519 0 Mar16 ? 00:00:01 postgres: stats collector process any thought ? thanks, Jerec

    Read the article

  • What is the difference between the Linux and Linux LVM partition type?

    - by ujjain
    Fdisk shows multiple partition types. What is the difference between choosing 83) Linux and 8e) Linux LVM? Choosing 83) Linux also works fine for using LVM, even creating a physical volume on /dev/sdb without a partition table works. Does picking a partition type in fdisk really matter? What is the difference in picking Linux or Linux LVM as partition type? [root@tst-01 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): l 0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx 5 Extended 42 SFS 86 NTFS volume set da Non-FS data 6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility 8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt 9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary 16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT 1e Hidden W95 FAT1 Command (m for help):

    Read the article

  • SQL Full-Text indexing not populating

    - by Sam
    We installed a clustered SQL 2005 installation on windows 2008 and reattached our san drives from another machine and restored to do a migration to new hardware. There have been a few minor issues, but this one has me stuck. Trying to populate Full-Text indexes is not working. I create a basic table with some simple text in a new database and get the same results as old indexes. 2010-09-27 10:30:46.85 spid19s Informational: Full-text Full population initialized for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'). Population sub-tasks: 1. 2010-09-27 10:31:15.36 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001DF. Attempt will be made to reindex it. 2010-09-27 10:31:15.37 spid19s The component 'MSFTE.DLL' reported error while indexing. Component path 'D:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\MSFTE.DLL'. 2010-09-27 10:31:15.37 spid19s Error '0x80070003' occurred during full-text index population for table or indexed view '[SQL_DBA].[dbo].[CIS_Report_Executions]' (table or indexed view ID '1767677345', database ID '5'), full-text key value 0x000001E0. Attempt will be made to reindex it. The rebuild/repopulate procedure finishes, but I get zero rows in the index. The .dll in the message is present and the service accounts have access to this. My FTData also has data in it, so it seems there wouldn't be permission issue on this folder. Application throws this error: “PHP Warning: mssql_query() [function.mssql-query]: message: Full-text catalog 'ikm_PageIndex_FText' is in an unusable state. Drop and re-create this full-text catalog. (severity 16) in E:\Inetpub\knowledgebase_insidemesa\lib\database\mssql.php on line 154” A microsoft discussion is the only post I found which had claimed to fix this - said it was registry related, but then didn't post the fix.

    Read the article

  • Fedora 12 on Vmware network disabled on restore

    - by Chaitanya
    I have a fedora 12 guest running on VMWare on windows 7. I use it mainly for the occasional linux dev. Whenever I restart the guest, networking works fine. But if I close the VMware player and save state, the next time I start the image, networking is disabled (red x on the network icon. message saying networking disabled). I can't seem to find a way to restore networking. I have to reboot the guest to get my network access back again. My Ubuntu image doesn't have this problem. I can close the player and when I re run the image, I can pick up where I left off, with all the open firefox windows and application windows as I left them. Fedora saves state, but doesn't seem to enable networking. There is a relevant warning I have seen "SELinux is preventing /sbin/ifconfig "read" access to/var/run/vmware-active-nics." But I am not sure how to solve it. I know fedora isn't officially supported by VMware, but it seems to be working fine for the most part and meeting my needs, except for this one little issue. Any help would be much appreciated.

    Read the article

  • Computer resetting semi-randomly

    - by Peter
    Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

    Read the article

  • Dovecot unable to perform mysql query

    - by NathanJ2012
    I have been following the ISPMail tutorials on workaround.org (the 2.9 Wheezy version) and thus far everything has been working fine. When I reached the step to "Testing email delivery" step I noticed a error about the query in the output log from /var/log/mail.log. May 14 06:48:59 mail postfix/pickup[17704]: EA4AD240A98: uid=0 from=<root> May 14 06:48:59 mail postfix/cleanup[17776]: EA4AD240A98: message-id=<[email protected]> May 14 06:48:59 mail postfix/qmgr[17706]: EA4AD240A98: from=<[email protected]>, size=429, nrcpt=1 (queue active) May 14 06:49:00 mail dovecot: auth-worker(17782): mysql(127.0.0.1): Connected to database mailserver May 14 06:49:00 mail dovecot: auth-worker(17782): Warning: mysql: Query failed, retrying: Table 'mailserver.users' doesn't exist May 14 06:49:00 mail dovecot: auth-worker(17782): Error: sql([email protected]): User query failed: Table 'mailserver.users' doesn't exist (using built-in default user_query: SELECT home, uid, gid FROM users WHERE username = '%n' AND domain = '%d') May 14 06:49:00 mail dovecot: lda([email protected]): msgid=<[email protected]>: saved mail to INBOX May 14 06:49:00 mail postfix/pipe[17780]: EA4AD240A98: to=<[email protected]>, relay=dovecot, delay=0.09, delays=0.03/0.01/0/0.06, dsn=2.0.0, status=sent (delivered via dovecot service) May 14 06:49:00 mail postfix/qmgr[17706]: EA4AD240A98: removed I found this rather interesting that it isn't finding the DB so I went back through and checked EVERY file that I touched that involved the DB (including the postfix cf files) and everything is correct so I am baffled at this point, but oddly enough it would seem the email still made it to the correct destination in /var/vmail/domain.com/. Should I be worried about this or am I missing something here? Since it is a message from dovecot it would be the query from dovecot-sql.conf.ext which I am including here driver = mysql connect = host=127.0.0.1 dbname=mailserver user=blocked password=***REMOVED*** default_pass_scheme = PLAIN-MD5 password_query = SELECT email as user, password FROM virtual_users WHERE email='%u';

    Read the article

  • How to disable irritating Office File Validation security alert?

    - by Rabarberski
    I have Microsoft Office 2007 running on Windows 7. Yesterday I updated Office to the latest service pack, i.e. SP3. This morning, when opening an MS Word document (.doc format, and a document I created myself some months ago) I was greeted with a new dialog box saying: Security Alert - Office File Validation WARNING: Office File Validation detected a problem while trying to open this file. Opening this is probably dangerous, and may allow a malicious user to take over your computer. Contact the sender and ask them to re-save and re-send the file. For more security, verify in person or via the phone that they sent the file. Including two links to some microsoft blabla webpage. Obviously the document is safe as I created it myself some months ago. How to disable this irritating dialog box? (On a sidenote, a rethorical question: Will Microsoft never learn? I consider myself a power user in Word, but I have no clue what could be wrong with my document so that it is considered dangerous. Let alone more basic users of Word. Sigh....)

    Read the article

  • Failing Windows Updates with Error Code 800719e4

    - by Kev
    On a number of Vista machines I have now come across the same error - when installing updates everything works fine, until it after it reboots and the rolls back during step 3. On all occasions (where a simple retry hasn't worked) the error code has been 800719e4. On my own laptop I have so far tried the following:- Installed the updates one by one manually - I started on the smallest and one by one have worked towards the largest one which has left me with "Security Update for Windows (KB2286198)" that refuses to install. Renamed all the files in "C:\Windows\Logs\CBS" to "xxx.old" where xxx was the original name with windows update turned off - no change Renamed all the folders in "C:\Windows\SoftwareDistribution" in the same manner - no change Attempted to install it manually "Windows6.0-KB2286198-x86.msu" - no change Tried to un-install IE8 - doesn't work, rolls back at the end (Installing the IE9 Beta when it launched was what alerted me to the issue on this laptop) Ran a "Fix It" thing from the Microsoft Website - no help (Can't find the link now). Tried to recover from the disk - but alas my laptop only has a recovery partition (and was unservice packed original). Ran with nothing running on startup, and only MS services - again no change. Google is being useless with a load of posts trying to get me to call a telephone number with letters in (presumably an American number) The error code appears to mean error log full but no one has any idea which log! The WinUpdate log does indicate the following is the error point though :- 2010-10-23 13:54:48:230 1240 738 Handler WARNING: Got extended error: "POQ Operation SetKeyValue OperationData \Registry\machine\Schema\wcm://Microsoft-Windows-shell32?version=6.0.6002.18287&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\HKEY_CLASSES_ROOT_lnkfile_shellex_DropHandler_defaultValue, @default, , ewAwADAAMAAyADEANAAwADEALQAwADAAMAAwAC0AMAAwADAAMAAtAEMAMAAwADAALQAwADAAMAAwADAAMAAwADAAMAAwADQANgB9AAAA" Has anyone any idea how to fix this once and for all - reinstalling laptop after laptop from scratch is mildly annoying at work where Office and Firefox are the only extras, but even more annoying at home - I don't fancy going through the palaver of reinstalling everything yet again.

    Read the article

  • open_basedir problems with APC and Symfony2

    - by Stephen Orr
    I'm currently setting up a shared staging environment for one of our applications, written in PHP5.3 and using the Symfony2 framework. If I only host a single instance of the application per server, everything works as it should. However, if I then deploy additional instances of the application (which may or may not share the exact same code, dependent on client customisations), I get errors like this: [Tue Nov 06 10:19:23 2012] [error] [client 127.0.0.1] PHP Warning: require(/var/www/vhosts/application1/httpdocs/vendor/doctrine-common/lib/Doctrine/Common/Annotations/AnnotationRegistry.php): failed to open stream: Operation not permitted in /var/www/vhosts/application2/httpdocs/app/bootstrap.php.cache on line 1193 [Tue Nov 06 10:19:23 2012] [error] [client 127.0.0.1] PHP Fatal error: require(): Failed opening required '/var/www/vhosts/application1/httpdocs/app/../vendor/doctrine-common/lib/Doctrine/Common/Annotations/AnnotationRegistry.php' (include_path='.:/usr/share/pear:/usr/share/php') in /var/www/vhosts/application2/httpdocs/app/bootstrap.php.cache on line 1193 Basically, the second site is trying to require the files from the first site, but due to open_basedir restrictions it can't do that. I'm not willing to disable open_basedir as that is only masking the problem instead of solving it, and creates a dependency between applications that should not be present. I initially believed this was related to a Symfony2 error, but I've now tracked it down to an issue with APC; disabling APC also solves the error, but I'm concerned about the performance impact of doing so. Does anyone have any suggestions on what I might be able to do?

    Read the article

  • Cannot install git-core using macports

    - by robUK
    Hello, Snow Leopard 10.6.4 mac ports 1.9.1 I have just installed macports and I want to install git-core. However, I get the following errors: ---> Computing dependencies for git-core ---> Dependencies to be installed: python26 db46 gdbm readline sqlite3 rsync popt ---> Building db46 Error: Target org.macports.build returned: shell command failed Log for db46 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_db46/main.log Error: The following dependencies failed to build: python26 db46 gdbm readline sqlite3 rsync popt Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> I have tried doing a port selfupdate and a port clean all and then trying to install again. But still get the same problem. I have also tried install the dependent db46 on its own. Here is the log message: :error:build Target org.macports.build returned: shell command failed :debug:build Backtrace: shell command failed while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for db46): org.macports.activate org.macports.build org.macports.destroot org.macports.install This is my first time using mac ports. Many thanks for any suggestions.

    Read the article

  • Windows XP: How to delete files and folders that cannot be deleted?

    - by glenneroo
    I have a backup copy of a previous Windows' Documents and Settings folder which only contains my original user and within 2 more directories: Favorites and Local Settings. When I try to delete Local Settings I get this error: When I try to delete Favorites, I get this error: I ran this in a cmd shell: attrib *.* -r -a -s -h /s ...but it did not help, nor did it return any errors/warnings. I used Unlocker v1.8.5 and LockHunter repeatedly at multiple levels to see if any files are in use, but both always say: No Files Locked. Update #1: I was able to rename the directory, which now gives me this warning before (trying to) delete: If I press Yes (or Yes to All) then I get this error: Update #2: I let chkdsk /f run which required a reboot since it's on my primary system partition. During Stage 2 scanning, I received about 40 of these: Deleting an index entry from index $0 of file 25. ...followed by: Deleting index entry cookies in index $I30 of file 37576. ...but I still get the first error dialog above when trying to delete. Update #3: Digging deeper, the 99 is the name of one of many directories located deep in here: C:\Documents and Settings.OLD\User\Local Settings\Application Data\Microsoft\Messenger\[email protected]\SharingMetadata\[email protected]\DFSR\Staging\CS{D4E4AE55-B5E2-F03B-5189-6C4DA6E41788}\ Inside each of those directories were files with names such as: 2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-Downloaded.frx I noticed that, unlike all the directories, I couldn't rename any of these files. I also noticed that the file + dir names were extremely long: Original directory = 194 characters Filenames = 100+ characters Together the length exceeds the 255-char limit which is bad and would explain the error message I posted in Update #1. Partial Solution: Rename all directories until the total path length is less than 100. Afterwards I was able to rename the .frx files, not to mention delete everything inside the Local Settings directory. This is only a partial solution because this (empty) directory is still undeleteable: C:\1\2\Favorites\Wien\What To Do.. I'm guessing because of the ".." at the end, Windows (Explorer and cmd) can't deal with it: Here is what Explorer properties shows: Any ideas?

    Read the article

  • InstantSSL's certificate no different than a self signed certificate under Nginx with an IP accessed address

    - by Absolute0
    I ordered an ssl certificate from InstantSSL and got the following pair of files: my_ip.ca-bundle, my_ip.crt I also previously generated my own key and crt files using openssl. I concatenated all the crt files: cat my_previously_generted.crt my_ip.ca_bundle my_ip.crt chained.crt And configured nginx as follows: server { ... listen 443; ssl on; ssl_certificate /home/dmsf/csr/chained.crt; ssl_certificate_key /home/dmsf/csr/csr.nopass.key; ... } I don't have a domain name as per the clients request. When I open the browser with https://my_ip chrome gives me this error: The site's security certificate is not trusted! You attempted to reach my_ip, but the server presented a certificate issued by an entity that is not trusted by your computer's operating system. This may mean that the server has generated its own security credentials, which Google Chrome cannot rely on for identity information, or an attacker may be trying to intercept your communications. You should not proceed, especially if you have never seen this warning before for this site.

    Read the article

  • OpenVPN with MacOS X Client and same subnets in local and remote net.

    - by Daniel
    I have a homenetwork 192.168.1.0/24 with gteway 192.168.1.1 and a remote network with the same parameters. Now I want to create a OpenVPN tunnel between those networks. I have no problems with Windows, because Windows routes everything to 192.168.1.0/24 except 192.168.1.1 throught the tunnel. On MacOS X however I see the folling line in the Details window: 2010-05-10 09:13:01 WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] When I list the routes I get the following: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 13 3 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 12 3589 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1 0:1e:e5:f4:ec:7f UHLW 13 17 en1 1103 192.168.1.101 localhost UHS 0 0 lo0 192.168.6 192.168.6.5 UGSc 0 0 tun0 192.168.6.5 192.168.6.6 UH 1 0 tun0 My Interfaces are en1 - My local Wifi network tun0 - The tunnel interface As can be seen from the routes above there is no entry for 192.168.1.0/24 that routes the traffic through the tunnel interface. When I manually route a single IP like 192.168.1.16 over the tunnel gateway 192.168.6.6, this works. Q: How do I set up my routes in MacOS X for the same behaviour as on windows, to route everything except 192.168.1.1 through the tunnel, but leave the default gateway to be my local 192.168.1.1 ?

    Read the article

  • Facing error: "Could not open a connection to your authentication agent."; trying to add ssh-key.

    - by Kaustubh P
    I use ubuntu server 10.04. ssh-add /foo/cert.pem gave the following output Could not open a connection to your authentication agent. These are my running processes: ps -aux | grep ssh Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html root 1523 0.0 0.0 49260 632 ? Ss Dec25 0:00 /usr/sbin/sshd root 10023 0.0 0.3 141304 6012 ? Ss 12:58 0:00 sshd: padmin [priv] padmin 10117 0.0 0.1 141304 2400 ? S 12:58 0:00 sshd: padmin@pts/1 padmin 11867 0.0 0.0 7628 964 pts/1 S+ 13:06 0:00 grep --color=auto ssh root 31041 0.0 0.3 141264 5884 ? Ss 11:24 0:00 sshd: padmin [priv] padmin 31138 0.0 0.1 141264 2312 ? S 11:25 0:00 sshd: padmin@pts/0 root 31382 0.0 0.3 139240 5844 ? Ss 11:26 0:00 sshd: padmin [priv] padmin 31475 0.0 0.1 139372 2488 ? S 11:27 0:00 sshd: padmin@notty padmin 31476 0.0 0.0 12468 964 ? Ss 11:27 0:00 /usr/lib/openssh/sftp-server These are my environment variables: $ env | grep SSH SSH_CLIENT=192.168.1.13 42626 22 SSH_TTY=/dev/pts/1 SSH_CONNECTION=192.168.1.13 42626 192.168.1.2 22 What is wrong? Why cant I add any identities? Thanks.

    Read the article

  • Maximum limit of filepointer in php reached and not changeable

    - by mlaug
    I have a server with the current 5.3.x version installed. Since we are running a really simple and small server in php using sockets, that connects to a lot clients using sockets we need to raise the open file limit that has been already done on the server for the user, that runs the server #ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 29879 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 8192 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 29879 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited and we compiled php with --enable-fd-setsize=8192 still we are getting [19-Nov-2012 09:24:23 Europe/Berlin] PHP Warning: socket_select(): You MUST recompile PHP with a larger value of FD_SETSIZE. It is set to 1024, but you have descriptors numbered at least as high as 1024. --enable-fd-setsize=2048 is recommended, but you may want to set it to equal the maximum number of open files supported by your system, in order to avoid seeing this error again at a later date. once in a while in our logs. Anyone knows who to configure the unix server and php correctly to have that working? I found a bug, but that is related to 2006 and marked as "not a bug" https://bugs.php.net/bug.php?id=37025&edit=1

    Read the article

  • L2TP over IPSec VPN with OpenSwan and XL2TPD can't connect, timeout on Centos 6

    - by Disco
    I'm setting up LT2p over IPSec on my Centos 6.3 fresh install. I have iptables flushed, permit all. Whenever I try to connect, i get a 'no reply from vpn' and nothi Here's my ipsec.conf file (Server is 1.2.3.4) : config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=1.2.3.4 leftprotoport=17/1701 right=%any rightprotoport=17/%any My /etc/ipsec.secrets 1.2.3.4 %any: PSK "password" My sysctl.conf (appened lines) net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.default.log_martians = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.icmp_ignore_bogus_error_responses = 1 Here's what 'ipsec verify' gives: # ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.32/K2.6.32-279.19.1.el6.x86_64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] And I see xl2tpd is listening on 1701/udp : udp 0 0 1.2.3.4:1701 0.0.0.0:* 2096/xl2tpd

    Read the article

  • Configuring CakePHP on Hostgator

    - by yaeger
    I have absolutely no idea what I am doing wrong here. I have followed just about every guide there is with installing cakephp on shared hosting and I am still having problems. I have also started over each time when following a guide. Maybe someone can help me out here as I am out of options. Here is my current setup: / app webroot vendors lib cake public_html .htaccess index.php plugins I have configured the index.php file in the public_html to point to the correct files. I have also done this in the index.php file located in webroot folder. I am getting an Internal 500 server error and it says to check my logs for what the error specifically is. However there are no logs being generated. I removed the .htaccess file from the public_html folder and I get the following errors: Warning: require(/app/webroot/index.php) [function.require]: failed to open stream: No such file or directory in /home/user/public_html/index.php on line 40 Fatal error: require() [function.require]: Failed opening required '/app/webroot/index.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/user/public_html/index.php on line 40 line 40 is require APP_DIR . DS . WEBROOT_DIR . DS . 'index.php'; DS = "/" WEBROOT_DIR = "app" Anyone have any suggestions? I am at lost at what I am doing wrong.

    Read the article

  • mysqld refusing connections from localhost

    - by Dennis Rardin
    My mail server (Ubuntu 10.04) uses mysql for virtual domains, virtual users. For some reason, mysqld has started refusing connections from localhost. I see these in the mail server log: Oct 6 00:31:14 apollo postfix/trivial-rewrite[16888]: fatal: proxy:mysql:/etc/postfix/mysql-virtual_domains.cf(0,lock|fold_fix): table lookup problem and: Oct 7 13:39:15 apollo postfix/proxymap[25839]: warning: connect to mysql server 127.0.0.1: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I also get the following in auth.log: Oct 6 22:33:31 apollo mysqld[31775]: refused connect from 127.0.0.1 Telnet to the local port: root@apollo:/var/log/mysql# telnet localhost 3306 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. root@apollo:/var/log/mysql# I am not sure why this started happening, but there was a disk failure in a RAID 1 pair a bit earlier that day. So it's possible I have a damaged config file or something. But mail was working for at least an hour after the drive event, so who knows for sure? phpmyadmin works fine, and the databases themselves look like they're intact. I think/believe that selinux and iptables are disabled and not running. So ... why is mysqld refusing connections from localhost? What should I check? What processes might cause this if a .conf file or possibly a binary was damaged? Which other log files might contain clues? I've enabled "general logging" in /etc/mysql/my.cnf, but I get no interesting or informative entries there. Thanks, m00tpoint

    Read the article

  • VMWare Fusion cannot connect to the NAT connection on my Mac

    - by FFish
    I have been using VMWare Fusion on my Mac to check out my websites on localhost. Now I can't connect anymore with the NAT connection. There seems to be a problem with my IP address or Mac address? I have no idea what causes this, it was working fine before!? In the XP (SP2) VM, in the taskbar I see the Local Area Connection with the yellow warning icon. The bubble says: "This connection has limited or no connectivity. You might not be aisle to access the Internet or some network resources. For more information, click this message." Doing that opens up the Local Area Connection Status panel. In the Support tab, when I click the repair button I get following message: "Windows could not finish repairing the problem because the following action cannot be completed: Renewing IP address." I tried disabling my firewall and also XAMPP that I use as server on OSX. VMWware version: 3.1 VM: XP SP2 Mac OSX 10.6.3 Any help would be greatly appreciated.

    Read the article

  • Firebox 1250e Core Failing?

    - by Noah
    We have 2 Firebox 1250e Core firewall boxes in our production environment, serving as an active and passive mode. A few months back, the active box was flashing a warning light, so our consultant removed it, and plugged it in to a test network. Everything appeared to be working fine, so he reloaded it into the production environment, and we didn't see any other issues. Fast forward to last week, and out network was constantly dropping connections over RDC, timing out, and performing as if there was a traffic issue. I turned off the production box and everything began to work fine immediately. At this point though, I'm not sure how to proceed. Should the box be completely replaced? Is there any recommended testing we could do to determine if there is a failure of some type with this device? Should we try upgrading the software on it? I know the environment isn't the issue, since the passive box (which is now the active one) is working fine. We'd like to have 2 in production though for safety failover purposes. I am not a network admin, but am hoping someone here might be able to provide some guidance.

    Read the article

  • arch openldap authentication failure

    - by nonus25
    I setup the openldap, all look fine but i cant setup authentication, #getent shadow | grep user user:*::::::: tuser:*::::::: tuser2:*::::::: #getent passwd | grep user git:!:999:999:git daemon user:/:/bin/bash user:x:10000:2000:Test User:/home/user/:/bin/zsh tuser:x:10000:2000:Test User:/home/user/:/bin/zsh tuser2:x:10002:2000:Test User:/home/tuser2/:/bin/zsh from root i can login as a one of these users #su - tuser2 su: warning: cannot change directory to /home/tuser2/: No such file or directory 10:24 tuser2@juliet:/root i cant login via ssh also passwd is not working #ldapwhoami -h 10.121.3.10 -D "uid=user,ou=People,dc=xcl,dc=ie" ldap_bind: Server is unwilling to perform (53) additional info: unauthenticated bind (DN with no password) disallowed 10:30 root@juliet:~ #ldapwhoami -h 10.121.3.10 -D "uid=user,ou=People,dc=xcl,dc=ie" -W Enter LDAP Password: ldap_bind: Invalid credentials (49) typed password by me is correct /etc/openldap/slapd.conf access to dn.base="" by * read access to dn.base="cn=Subschema" by * read access to * by self write by users read by anonymous read access to * by dn="uid=root,ou=Roles,dc=xcl,dc=ie" write by users read by anonymous auth access to attrs=userPassword,gecos,description,loginShell by self write access to attrs="userPassword" by dn="uid=root,ou=Roles,dc=xcl,dc=ie" write by anonymous auth by self write by * none access to * by dn="uid=root,ou=Roles,dc=xcl,dc=ie" write by dn="uid=achmiel,ou=People,dc=xcl,dc=ie" write by * search access to attrs=userPassword by self =w by anonymous auth access to * by self write by users read database hdb suffix "dc=xcl,dc=ie" rootdn "cn=root,dc=xcl,dc=ie" rootpw "{SSHA}AM14+..." there are some parts of that conf file /etc/openldap/ldap.conf looks : BASE dc=xcl,dc=ie URI ldap://192.168.10.156/ TLS_REQCERT allow TIMELIMIT 2 so my question is what i am missing that ldap not allow me login by using password ?

    Read the article

  • Sharepoint (WSS 3.0) on SBS 2008 broken.

    - by tcv
    I recently ran the Sharepoint Products and Technologies Wizard. I had hoped this would bring up Sharepoint and allow me to access it so I could begin to learn. But it's not working. Here is some data that I hope is relevant. I am doing all my testing on the SBS 2008 server itself. I changed the hostheader in IIS to reflect an external FQDN I plan to deploy. The SBS server is remote and there are no domain-connected workstations. If I browse "localhost" SSL, I can get to the site, albeit with a self-signed cert warning. If I attempt to connect via SSL using either the internal FQDN (.local), the External FQDN (.net) or any other permutation thereof, I am prompted for credentials three times but am not allowed access. My account is a domain admin. The site is inaccessible using port 80 whether using localhost, internal FQDN (.local), and external FQDN (.net) Right now, I suspect my problem is within IIS, but I don't know. My plan to publish the sharepoint site to the web so my partner and I can check documents in/out. Can someone help me get started in current direction?

    Read the article

  • How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

    - by Chadddada
    I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

    Read the article

  • Tomcat6 getting crashed at regular intervals installed in Ubuntu

    - by Milesh Rout
    I have installed Tomcat6 in Ubuntu OS and when I run my web application the server gets crashed at regular intervals. I have tried a lot but not getting the solution. I have increased the memory upto 2048mb but still getting such error. Following is the error I am getting. Any help would be really appreciated. org.apache.tomcat.util.http.Parameters processParametersINFO: Invalid chunk starting at byte [312] and ending at byte [312] with a value of [null] ignoredException in thread "Timer-1" Exception in thread "com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#0" Exception in thread "com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#2" Exception in thread "com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread-#1" Exception in thread "Timer-2" Exception in thread "http-8080-4" Exception in thread "http-8080-8" Exception in thread "http-8080-17" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.UpdateTimestampsCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.UpdateTimestampsCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.StandardQueryCache.data" Exception in thread "org.hibernate.cache.UpdateTimestampsCache.data" Exception in thread "com.safenet.usermgmt.User.data" Exception in thread "http-8080-7" Exception in thread "http-8080-12" Exception in thread "http-8080-16" Exception in thread "http-8080-14" Exception in thread "http-8080-13" Exception in thread "http-8080-15" Exception in thread "http-8080-6" OpenJDK Client VM warning: Exception java.lang.OutOfMemoryError occurred dispatching signal SIGTERM to handler- the VM may need to be forcibly terminated

    Read the article

  • MAMP MySQL won't start

    - by Tony
    I uninstalled MAMP completely, downloaded fresh copy of MAMP 2 from the MAMP website, did a clean install. However, when I try to start mysql, I get the following error log 111120 21:37:49 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 111120 21:37:50 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 111120 21:37:50 [Note] Plugin 'FEDERATED' is disabled. 111120 21:37:50 InnoDB: The InnoDB memory heap is disabled 111120 21:37:50 InnoDB: Mutexes and rw_locks use GCC atomic builtins 111120 21:37:50 InnoDB: Compressed tables use zlib 1.2.3 111120 21:37:50 InnoDB: Initializing buffer pool, size = 128.0M 111120 21:37:50 InnoDB: Completed initialization of buffer pool 111120 21:37:50 InnoDB: highest supported file format is Barracuda. 111120 21:37:50 InnoDB: Waiting for the background threads to start 111120 21:37:51 InnoDB: 1.1.5 started; log sequence number 1595675 111120 21:37:51 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 111120 21:37:51 [ERROR] Aborting 111120 21:37:51 InnoDB: Starting shutdown... 111120 21:37:51 InnoDB: Shutdown completed; log sequence number 1595675 111120 21:37:51 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete 111120 21:37:51 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended I've no clue why this is happening. I googled around and made sure that no instance of MySQL is running. Nothing seems to help.

    Read the article

< Previous Page | 159 160 161 162 163 164 165 166 167 168 169 170  | Next Page >