Search Results

Search found 8379 results on 336 pages for 'article'.

Page 164/336 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Installing the Updated XP Mode which Requires no Hardware Virtualization

  - by Mysticgeek

  Good news for those of you who have a computer without Hardware Virtualization, Microsoft had dropped the requirement so you can now run XP Mode on your machine. Here we take a look at how to install it and getting working on your PC. Microsoft has dropped the requirement that your CPU supports Hardware Virtualization for XP Mode in Windows 7. Before this requirement was dropped, we showed you how to use SecureAble to find out if your machine would run XP Mode. If it couldn’t, you might have gotten lucky with turning Hardware Virtualization on in your BIOS, or getting an update that would enable it. If not, you were out of luck or would need a different machine. Note: Although you no longer need Hardware Virtualization, you still need Professional, Enterprise, or Ultimate version of Windows 7. Download Correct Version of XP Mode For this article we’re installing it on a Dell machine that doesn’t support Hardware Virtualization on Windows 7 Ultimate 64-bit version. The first thing you’ll want to do is go to the XP Mode website and select your edition of Windows 7 and language. Then there are three downloads you’ll need to get from the page. Windows XP Mode, Windows Virtual PC, and the Windows XP Mode Update (All Links Below). Windows genuine validation is required before you can download the XP Mode files. To make the validation process easier you might want to use IE when downloading these files and validating your version of Windows. Installing XP Mode After validation is successful the first thing to download and install is XP Mode, which is easy following the wizard and accepting the defaults. The second step is to install KB958559 which is Windows Virtual PC.   After it’s installed, a reboot is required. After you’ve come back from the restart, you’ll need to install KB977206 which is the Windows XP Mode Update.   After that’s installed, yet another restart of your system is required. After the update is configured and you return from the second reboot, you’ll find XP Mode in the Start menu under the Windows Virtual PC folder. When it launches accept the license agreement and click Next. Enter in your log in credentials… Choose if you want Automatic Updates or not… Then you’re given a message saying setup will share the hardware on your computer, then click Start Setup. While setup completes, you’re shown a display of what XP Mode does and how to use it. XP Mode launches and you can now begin using it to run older applications that are not compatible with Windows 7. Conclusion This is a welcome news for many who want the ability to use XP Mode but didn’t have the proper hardware to do it. The bad news is users of Home versions of Windows still don’t get to enjoy the XP Mode feature officially. However, we have an article that shows a great workaround – Create an XP Mode for Windows 7 Home Versions & Vista. Download XP Mode, Windows Virtual PC, and Windows XP Mode Update Similar Articles Productive Geek Tips Our Look at XP Mode in Windows 7Run XP Mode on Windows 7 Machines Without Hardware VirtualizationInstall XP Mode with VirtualBox Using the VMLite PluginUnderstanding the New Hyper-V Feature in Windows Server 2008How To Run XP Mode in VirtualBox on Windows 7 (sort of) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser Scan for Viruses in Ubuntu using ClamAV Replace Your Windows Task Manager With System Explorer

  Read the article

• The Beginner’s Guide to Greasemonkey User Scripts in Firefox

  - by Asian Angel

  Everybody knows that Firefox has add-ons for virtually everything, but if you don’t want to bloat your installation you’ve always got the option of Greasemonkey scripts instead. Here’s a quick primer on how to use them. Getting Started with User Scripts Once you have Greasemonkey installed, managing the extension is really easy. Left click on the status bar icon to turn the extension on/off and right click to access the context menu shown here. Whether you use the Options button in the Add-ons Manager Window or the context menu shown above, both will bring up the Manage User Scripts dialog. At the moment you have a nice clean slate to work with… time to get some scripts added in. The majority of user scripts can be found at two different sites, the first being appropriately named userscripts.org, and you can either browse by tag or search for a script. As you can see here your search for a particular type of script can be quickly narrowed down based on category. There is definitely a lot to choose from. For our example we focused on the “textarea” tag. There were 62 scripts available but we quickly found what we were looking for on the first page. Installing, Managing, & Using Your Scripts When you find a script that you want to install visit the script’s homepage and click on the “Install” button. Note: Link for this script provided below. Once you have clicked on the Install button, Greasemonkey will open up the following installation window. You will be able to view: A summary of what the script does A list of websites that the script is supposed to function on (our example is set for all) View the script source if desired Make a final decision on whether to install the script or cancel the process Right-clicking on our status bar icon shows our new script listed and active. Reopening the Manage User Scripts window shows: Our new script listed in the column on the left The websites/pages included An option to disable the script (can also be done in the context menu) The ability to edit the script The ability to uninstall the script If you choose to edit the script you will be asked to browse for and select a default text editor of your choice (first time only). Once you have selected a text editor you can make any changes desired to the script. We decided to test our new user script on the site. Going to the comment box at the bottom we could easily resize the window as desired. The Comment box definitely got a lot bigger. Conclusion If you prefer to keep the number of extensions to a minimum in your Firefox installation then Greasemonkey and the Userscripts website can easily provide that extra functionality without the bloat. For added auto website script detection goodness see our article on Greasefire. Note: See our article here for specialized How-To Geek User Style Scripts that can be added to Greasemonkey. Links Download the Greasemonkey Extension (Mozilla Add-ons) Install the Textarea & Input Resize User Script Visit the Userscripts.org Website Visit the Userstyles.org Website Similar Articles Productive Geek Tips Enjoy How-To Geek User Style Script GoodnessEnable Multi-Column Google Searches with a User ScriptSearch Alternative Search Engines from within Bing’s Search PageFind User Scripts for Your Favorite Websites the Easy WaySet Up User Scripts in Opera Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• MSMQ messages using HTTP just won't get delivered

  - by John Breakwell

  I'm starting off the blog with a discussion of an unusual problem that has hit a couple of my customers this month. It's not a problem you'd expect to bump into and the solution is potentially painful. Scenario You want to make use of the HTTP protocol to send MSMQ messages from one machine to another. You have installed HTTP support for MSMQ and have addressed your messages correctly but they will not leave the outgoing queue. There is no configuration for HTTP support - setup has already done all that for you (although you may want to check the most recent "Installation of the MSMQ HTTP Support Subcomponent" section of MSMQINST.LOG to see if anything DID go wrong) - so you can't tweak anything. Restarting services and servers makes no difference - the messages just will not get delivered. The problem is documented and resolved by Knowledgebase article 916699 "The message may not be delivered when you use the HTTP protocol to send a message to a server that is running Message Queuing 3.0". It is unlikely that you would be able to resolve the problem without the assistance of PSS because there are no messages that can be seen to assist you and only access to the source code exposes the root cause. As this communication is over HTTP, the IIS logs would be a good place to start. POST entries are logged which show that connectivity is working and message delivery is being attempted: #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2006-09-12 12:11:29 #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status 2006-09-12 12:12:12 W3SVC1 10.1.17.219 POST /msmq/private$/test - 80 - 10.2.200.3 - 200 0 0 If you capture the traffic with Network Monitor you can see the POST being sent to the server but you also see a response being returned to the client: HTTP: Response to Client; HTTP/1.1; Status Code = 500 - Internal Server Error "Internal Server Error" means we can probably stop looking at IIS and instead focus on the Message Queuing ISAPI extension (Mqise.dll). MSMQ 3.0 (Windows XP and Windows Server 2003) comes with error logging enabled by default but the log files are in binary format - MSMQ 2.0 generated logging in plain text. The symbolic information needed for formatting the files is not currently publicly available so log files have to be sent in to Microsoft PSS.  Although this does mean raising a support case, formatting the log files to text and returning them to the customer shouldn't take long. Obviously the engineer analyses them for you - I just want to point out that you can see the logging output in text format if you want it. The important entries in the log for this problem are: [7]b48.928 09/12/2006-13:20:44.552 [mqise GetNetBiosNameFromIPAddr] ERROR:Failed to get the NetBios name from the DNS name, error = 0xea [7]b48.928 09/12/2006-13:20:44.552 [mqise RPCToServer] ERROR:RPC call R_ProcessHTTPRequest failed, error code = 1702(RPC_S_INVALID_BINDING) which allow a Microsoft escalation engineer to check the MQISE source code to see what is going wrong. This problem according to the article occurs when the extension tries to bind to the local MSMQ service after the extension receives a POST request that contains an MSMQ message. MSMQ resolves the server name by using the DNS host name but the extension cannot bind to the service because the buffer that MSMQ uses to resolve the server name is too small - server names that are exactly 15 characters long will not fit. RPC exception 0x6a6 (RPC_S_INVALID_BINDING) occurs in the W3wp.exe process but the exception is handled and so you do not receive an error message. The workaround is to rename the MSMQ server to something less than 15 characters. If the problem has only just been noticed in a production environment - an application may have been modified to get through a newly-implemented firewall, for example - then renaming is going to be an issue. Other applications may need to be reinstalled or modified if server names are hard-coded or stored in the registry. The renaming may also break a company naming convention where the name is built up from something like location+department+number. If you want to learn more about MSMQ logging then check out Chapter 15 of the MSMQ FAQ. In fact, even if you DON'T want to learn anything about MSMQ logging you should read the FAQ anyway as there is a huge amount of useful information on known issues and the like.

  Read the article

• Configuring Fed Authentication Methods in OIF / IdP

  - by Damien Carru

  In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme  to  the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to  the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:Password                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme  to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...>    <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>    <samlp:Status>        <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/>    </samlp:Status>    <saml:Assertion ...>        <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer>        <dsig:Signature>            ...        </dsig:Signature>        <saml:Subject>            <saml:NameID ...>[email protected]</saml:NameID>            <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">                <saml:SubjectConfirmationData .../>            </saml:SubjectConfirmation>        </saml:Subject>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z">            <saml:AuthnContext>                <saml:AuthnContextClassRef>                   urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport                </saml:AuthnContextClassRef>            </saml:AuthnContext>        </saml:AuthnStatement>    </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to  the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to  the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme  to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme  to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...>    <samlp:Status>        <samlp:StatusCode Value="samlp:Success"/>    </samlp:Status>    <saml:Assertion Issuer="https://idp.com/oam/fed" ...>        <saml:Conditions ...>            <saml:AudienceRestriction>                <saml:Audience>https://acme.com/sp/ssov11</saml:Audience>            </saml:AudienceRestriction>        </saml:Conditions>        <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">            <saml:Subject>                <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier>                <saml:SubjectConfirmation>                   <saml:ConfirmationMethod>                       urn:oasis:names:tc:SAML:1.0:cm:bearer                   </saml:ConfirmationMethod>                </saml:SubjectConfirmation>            </saml:Subject>        </saml:AuthnStatement>        <dsig:Signature>            ...        </dsig:Signature>    </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to  the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

  Read the article

• Silverlight Cream for March 24, 2010 -- #819

  - by Dave Campbell

  In this Issue: Nokola, Tim Heuer, Christian Schormann, Brad Abrams, David Kelley, Phil Middlemiss, Michael Klucher, Brandon Watson, Kunal Chowdhury, Jacek Ciereszko, and Unni. Shoutouts: Michael Klucher has a short post up For Love of the Game (Development)…, where he's looking for some input from the developer community. Shawn Hargreaves has a link post up of all the Windows Phone MIX10 presentations Chris Cavanagh has a Soft-Body Physics for Windows Phone 7 post up that goes along with one he did 1-1/2 years ago! Jeff Weber posted An Open Letter To Microsoft Regarding The Silverlight Game Development Community Pete Brown posted his MIX10 Recap ... lots of information, and discussion of what he was up to ... I liked the Trivia app Pete... glad to hear that was yours :) I've changed my mind and added a WP7 tag to SilverlightCream. I'll straighten out all the Mobile plus Silverlight links to point at the WP7 tab hopefully tonight. From SilverlightCream.com: EasyPainter Source Pack 3: Adorners, Mouse Cursors and Frames Nokola has been busy with EasyPainter adding in Custom, Extensible Mouse Cursors and Customizable Adorners with extensible adorner frames, and best of all... all with source code! Simulate Geo Location in Silverlight Windows Phone 7 emulator Among the things we don't have in our WP7 emulators is Geo Location... Tim Heuer comes to the rescue with a simulator for it... too cool, Tim! Blend 4: About Path Layout, Part II Christian Schormann is back with Part 2 of his tutorial sequence on the new Path Layout. Really good info and definitely cool presentations of the control. Silverlight 4 + RIA Services - Ready for Business: Exposing OData Services Brad Abrams continues his series with a post on exposing OData services. This looks like a great tutorial on the topic... will probably resolve some questions I've been having :) No Silverlight and Preloader Experience(ish) - in 10 seconds... David Kelley exposes the code he uses on his site, designed to be friendly to Silverlight and non-Silverlight users alike. Merged Dictionaries of Style Resources and Blend Phil Middlemiss has a nice article up on Merged Dictionaries and using multiple resource dictionaries that the app chooses, but also be compatible with Prism and Blend while not eating your system resources out of house and home. XNA Game Studio and Windows Phone Emulator Compatibility Michael Klucher has a definitive post up about getting your XNA and system up-to-speed for WP7... a must-read if you've been running any of the other XNA drops. Windows Phone 7 301 Redirect Bug Brandon Watson reports a 301 Redirect bug on WP7 ... see the code and how he got it, then follow along as he explains all the debug paths he took and what the resolution (?) really is :) Silverlight 4: How to use the new Printing API? Kunal Chowdhury has a tutorial up on printing with Silverlight 4 RC... from the project layout to printing and then printing a smaller section... all good Printing problem in Silverlight 4.0 RC - loading images in code behind Jacek Ciereszko also is writing about printing, and in his case he had problems with loading an image dynamically and printing it... plus he provides a solution to the 'blank page' problem. ToolboxExampleAttribute - a new extension point in Blend 4 (and a few other extensibility related changes) Unni has an article up about Expression Blend 4's new ToolboxExampleAttribute which allow you to have multiple examples of the same type resulting in different XAML produced. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

  Read the article

• BizTalk Cross Reference Data Management Strategy

  - by charlie.mott

  Article Source: http://geekswithblogs.net/charliemott This article describes an approach to the management of cross reference data for BizTalk.  Some articles about the BizTalk Cross Referencing features can be found here: http://home.comcast.net/~sdwoodgate/xrefseed.zip http://geekswithblogs.net/michaelstephenson/archive/2006/12/24/101995.aspx http://geekswithblogs.net/charliemott/archive/2009/04/20/value-vs.id-cross-referencing-in-biztalk.aspx Options Current options to managing this data include: Maintaining xml files in the format that can be used by the out-of-the-box BTSXRefImport.exe utility. Use of user interfaces that have been developed to manage this data: BizTalk Cross Referencing Tool XRef XML Creation Tool However, there are the following issues with the above options: The 'BizTalk Cross Referencing Tool' requires a separate database to manage.  The 'XRef XML Creation' tool has no means of persisting the data settings. The 'BizTalk Cross Referencing tool' generates integers in the common id field. I prefer to use a string (e.g. acme.country.uk). This is more readable. (see naming conventions below). Both UI tools continue to use BTSXRefImport.exe.  This utility replaces all xref data. This can be a problem in continuous integration environments that support multiple clients or BizTalk target instances.  If you upload the data for one client it would destroy the data for another client.  Yet in TFS where builds run concurrently, this would break unit tests. Alternative Approach In response to these issues, I instead use simple SQL scripts to directly populate the BizTalkMgmtDb xref tables combined with a data namepacing strategy to isolate client data. Naming Conventions All data keys use namespace prefixing.  The pattern will be <companyName>.<data Type>.  The naming conventions will be to use lower casing for all items.  The data must follow this pattern to isolate it from other company cross-reference data.  The table below shows some sample data. (Note: this data uses the 'ID' cross-reference tables.  the same principles apply for the 'value' cross-referencing tables). Table.Field Description Sample Data xref_AppType.appType Application Types acme.erp acme.portal acme.assetmanagement xref_AppInstance.appInstance Application Instances (each will have a corresponding application type). acme.dynamics.ax acme.dynamics.crm acme.sharepoint acme.maximo xref_IDXRef.idXRef Holds the cross reference data types. acme.taxcode acme.country xref_IDXRefData.CommonID Holds each cross reference type value used by the canonical schemas. acme.vatcode.exmpt acme.vatcode.std acme.country.usa acme.country.uk xref_IDXRefData.AppID This holds the value for each application instance and each xref type. GBP USD SQL Scripts The data to be stored in the BizTalkMgmtDb xref tables will be managed by SQL scripts stored in a database project in the visual studio solution. File(s) Description Build.cmd A sqlcmd script to deploy data by running the SQL scripts below.  (This can be run as part of the MSBuild process).   acme.purgexref.sql SQL script to clear acme.* data from the xref tables.  As such, this will not impact data for any other company. acme.applicationInstances.sql   SQL script to insert application type and application instance data.   acme.vatcode.sql acme.country.sql etc ...  There will be a separate SQL script to insert each cross-reference data type and application specific values for these types.

  Read the article

• Where Next for Google Translate? And What of Information Quality?

  - by ultan o'broin

  Fascinating article in the UK Guardian newspaper called Can Google break the computer language barrier? In it, Andreas Zollman, who works on Google Translate, comments that the quality of Google Translate's output relative to the amount of data required to create that output is clearly now falling foul of the law of diminishing returns. He says: "Each doubling of the amount of translated data input led to about a 0.5% improvement in the quality of the output," he suggests, but the doublings are not infinite. "We are now at this limit where there isn't that much more data in the world that we can use," he admits. "So now it is much more important again to add on different approaches and rules-based models." The Translation Guy has a further discussion on this, called Google Translate is Finished. He says: "And there aren't that many doublings left, if any. I can't say how much text Google has assimilated into their machine translation databases, but it's been reported that they have scanned about 11% of all printed content ever published. So double that, and double it again, and once more, shoveling all that into the translation hopper, and pretty soon you get the sum of all human knowledge, which means a whopping 1.5% improvement in the quality of the engines when everything has been analyzed. That's what we've got to look forward to, at best, since Google spiders regularly surf the Web, which in its vastness dwarfs all previously published content. So to all intents and purposes, the statistical machine translation tools of Google are done. Outstanding job, Googlers. Thanks." Surprisingly, all this analysis hasn't raised that much comment from the fans of machine translation, or its detractors either for that matter. Perhaps, it's the season of goodwill? What is clear to me, however, of course is that Google Translate isn't really finished (in any sense of the word). I am sure Google will investigate and come up with new rule-based translation models to enhance what they have already and that will also scale effectively where others didn't. So too, will they harness human input, which really is the way to go to train MT in the quality direction. But that aside, what does it say about the quality of the data that is being used for statistical machine translation in the first place? From the Guardian article it's clear that a huge humanly translated corpus drove the gains for Google Translate and now what's left is the dregs of badly translated and poorly created source materials that just can't deliver quality translations. There's a message about information quality there, surely. In the enterprise applications space, where we have some control over content this whole debate reinforces the relationship between information quality at source and translation efficiency, regardless of the technology used to do the translation. But as more automation comes to the fore, that information quality is even more critical if you want anything approaching a scalable solution. This is important for user experience professionals. Issues like user generated content translation, multilingual personalization, and scalable language quality are central to a superior global UX; it's a competitive issue we cannot ignore.

  Read the article

• Rotate a Video 90 degrees with VLC or Windows Live Movie Maker

  - by DigitalGeekery

  Have you ever captured video with your cell phone or camcorder only to discover when you play it back on your computer that the video is rotated 90 degrees? Or maybe you shot it that way on purpose because you preferred portrait style to a landscape view? Before you go straining your neck or flipping your monitor on it’s side to watch your video, we’ll show you a few easier methods. If you simply want to rotate the video while you watch it, we’ll show you how to accomplish that with VLC Media Player. If you want to convert the video so it is rotated permanently, we’ll show you how to do that with Windows Live Movie Maker and output your video as a WMV file. Rotate and Watch a Video in VLC Download, install, and run VLC Media Player. (See download link below)   Open your video file by going to Media  > Open File… and browsing for your file. Or, by just dragging and dropping your video onto the VLC player.   Choose Tools from the Menu bar and select Effects and Filters. On the Video Effects tab, tick the Transform checkbox and choose your degrees of rotation. The video is rotated counter-clockwise, so to rotate clockwise 90 degrees you’ll want to choose Rotate by 270 degrees.   Now you can enjoy your video the way it was intended to be viewed. Rotate and Convert the Video with Windows Live Movie Maker Starting with Windows 7, Windows Movie Maker no longer comes pre-installed with the OS. It’s now part of the Windows Live suite that is available as a separate, free download for Windows 7 and Vista. (Windows XP is not supported) You can find the link to our detailed instruction on how to install Windows Live at the end of the article. To add your video files to Windows Movie Maker, click on Add videos and photos on the Home tab, or drag and drop the video into the blank area on the right side of the application. Next, you’ll need to rotate the video. Staying on the Home tab, click on the Rotate right 90° or Rotate left 90°.   You’ll see your video is now oriented properly on the left.   To save and convert your video to WMV format, click the Movie Maker tab just to the left of the Home tab. Hover your cursor over Save movie, and then select your output settings. You also have the option to burn directly to DVD. Browse for a location to save it and rename the output file if you’d like. Click Save. You’ll be notified when the file is complete. Now you’ll have your video properly oriented in WMV file format.   These are two rather easy ways to accomplish rotating your video. Unfortunately, Windows Live Movie Maker doesn’t give you a lot of  options for output. If you want to output to a file, your only choice is WMV format or DVD. However, previous versions will also allow you to export to AVI. How-To Geek’s Install Windows Live Essentials In Windows 7 Article. Download Windows Live Download VLC Media Player Similar Articles Productive Geek Tips How to Make/Edit a movie with Windows Movie Maker in Windows VistaCreate and Author DVDs in Windows 7Family Fun: Share Photos with Photo Gallery and Windows Live SpacesInstall Windows Live Essentials In Windows 7Add Network Support to Windows Live MovieMaker TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images Get Wildlife Photography Tips at BBC’s PhotoMasterClasses

  Read the article

• 2010 April Fools Joke

  - by Dane Morgridge

  I started at my current job at the end of March last year and there were some pretty funny April fools jokes.  Nothing super crazy, but pretty funny.  One guy came in and there was a tree in his cube.  We (me and the rest of my team) were planning for a couple of weeks on what we could do that would be just awesome.  We had a lot of really good ideas but nothing was spectacular.  Then Steve Andrews had a brilliant idea (yes it's true).  Since we have internal DNS servers we could redirect DNS to our internal servers for a site such as cnn.com.  Then we would lift the code from the site and create our own home page that would contain news about people in the company.  Steve was actually laughing so hard when he thought of the idea that it took him almost 30 minutes to spit it out. I thought, "this is perfect". I had enlisted a couple of people to help come up with the stories and at the same time we were trying to figure out how to get everybody to the site the morning of the 1st.  Then it hit me.  We could have the main article be one of my getting picked up by the FBI on hacking charges.  Then Chris (my boss) could send an email out telling everyone that I would not be there today and direct them to the site.  That would for sure get everyone to go to cnn.com first thing and see our prank.  I begun the process of looking for photos I could crop myself into and found the perfect one.  Then my wife took a good pic with our Canon 40D and I went to work.  The night before I didn't have any other stories due to everyone being really busy at work, but I decided to go ahead with just the FBI bust on it's own.  I got everything working and tested and coordinated with Chris for me to come in late so no one would see me at the office until after everyone had seen the joke. And so the morning of April fools came and I was waiting at home and the email was perfect.  Chris told everyone that I wouldn't be in and that not to answer any questions if you got any calls from anybody.  The Photoshop job I did was not perfect, but good enough and I even wrote an article with it that went into more detail about how I had been classified as a terrorist and all kinds of stuff. People at work started getting the emails and a few people didn't realize it was a joke (as I had hoped), including some from senior management (one person in particular who shall remain nameless in this post).  Emails started flying around about how to contain the situation and how to handle bad PR.  He basically bought it hook, line and sinker and then went in to crisis mode.  It was awesome! He did finally realize it was a joke and I will likely print and frame the email he sent out.  In short, April fools this year was a huge success.

  Read the article

• How to Restore the Real Internet Explorer Desktop Icon in Windows 7

  - by The Geek

  Remember how previous versions of Windows had an Internet Explorer icon on the desktop, and you could right-click it to quickly access the Internet Options screen? It’s completely gone in Windows 7, but a geeky hack can bring it back. Microsoft removed this feature to comply with all those murky legal battles they’ve had, and their alternate suggestion is to create a standard shortcut to iexplore.exe on the Desktop, but it’s not the same thing. We’ve got a registry hack to bring it back. This guest article was written by Ramesh from the WinHelpOnline blog, where he’s got loads of really geeky registry hacks. Bring Back the Internet Explorer Namespace Icon in Windows 7 the Easy Way If you just want the IE icon back, all you need to do is download the RealInternetExplorerIcon.zip file, extract the contents, and then double-click on the w7_ie_icon_restore.reg file. That’s all you have to do. There’s also an undo registry file there if you want to get rid of it. Download the Real Internet Explorer Icon Registry Hack Manual Registry Hack If you prefer doing things the manual way, or just really want to understand how this hack works, you can follow through the manual steps below to learn how it was done, but we’ll have to warn you that it’s a lot of steps. Launch Regedit.exe using the Start Menu search box, and then navigate to the following location: HKEY_CLASSES_ROOT \ CLSID \ {871C5380-42A0-1069-A2EA-08002B30309D} Right-click on the key on the left-hand pane, choose Export, and save it to a .REG file (say, ie-guid.reg) Open up the REG file using Notepad… From the Edit menu, click Replace, and replace every occurrence of the following GUID string {871C5380-42A0-1069-A2EA-08002B30309D} … with a custom GUID string, such as: {871C5380-42A0-1069-A2EA-08002B30301D} Save the REG file and close Notepad, and then double-click on the file to merge the contents to the registry. Either re-open the registry editor, or use the F5 key to reload everything with the new changes (this step is important). Now you can navigate downto the following registry key: HKEY_CLASSES_ROOT \ CLSID \ {871C5380-42A0-1069-A2EA-08002B30301D} \ Shellex \ ContextMenuHandlers \ ieframe Double-click on the (default) key in the right-hand pane and set its data as: {871C5380-42A0-1069-A2EA-08002B30309D} With this done, press F5 on the desktop and you’ll see the Internet Explorer icon that looks like this: The icon appears incomplete without the Properties command in right click menu, so keep reading. Final Registry Hack Adjustments Click on the following key, which should still be viewable in your Registry editor window from the last step. HKEY_CLASSES_ROOT\CLSID\{871C5380-42A0-1069-A2EA-08002B30301D} Double-click LocalizedString in the right-hand pane and type the following data to rename the icon. Internet Explorer Select the following key: HKEY_CLASSES_ROOT\CLSID\{871C5380-42A0-1069-A2EA-08002B30301D}\shell Add a subkey and name it as Properties, then select the Properties key, double-click the (default) value and type the following: P&roperties Create a String value named Position, and type the following data bottom At this point the window should look something like this: Under Properties, create a subkey and name it as Command, and then set its (default) value as follows: control.exe inetcpl.cpl Navigate down to the following key, and then delete the value named LegacyDisable HKEY_CLASSES_ROOT \ CLSID \ {871C5380-42A0-1069-A2EA-08002B30301D} \ shell \ OpenHomePage Now head to the this key: HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Desktop \ NameSpace Create a subkey named {871C5380-42A0-1069-A2EA-08002B30301D} (which is the custom GUID that we used earlier in this article.) Press F5 to refresh the Desktop, and here is how the Internet Explorer icon would look like, finally. That’s it! It only took 24 steps, but you made it through to the end—of course, you could just download the registry hack and get the icon back with a double-click. Similar Articles Productive Geek Tips Quick Help: Restore Show Desktop Icon in Windows VistaQuick Help: Restore Flip3D Icon in Windows VistaAdd Internet Explorer Icon to Windows XP / Vista DesktopHide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• Installing SharePoint 2010 in one machine with built in database

  - by sreejukg

  It is very easy to deploy SharePoint 2010 in a single server using the built-in database. Normally one need to choose such installation for evaluation purposes. When installing with default settings, setup installs Microsoft SQL server 2008 express database along with SharePoint. After installing SharePoint, you need to run SharePoint products and technology configuration wizard which will install central admin website and creates the configuration database and content database for SharePoint sites. Limitations 1. You can not perform this installation on a domain controller 2. The maximum size for express edition database is 4 GB SharePoint 2010 only supports 64 bit operating systems. The installation steps are for windows server r2 64 bit enterprise edition. Installation steps The first screen for the installation is as follows As a first step you need to install the s/w prerequisites. Click on the corresponding link Click next, here you have to agree on the license terms. Select the checkbox and then click next. The installation will starts. The progress will be updated in the screen. This may take some time as during this process, there are some components needs to be downloaded from internet. Make sure you are connected to the internet, then only the installation will become a success. If any error occurs, it will display the error, you need to configure in order to continue. If everything ok you will receive the following success page. Click finish to exit the installation window. Now from the first screen, select Install SharePoint server. This will install SharePoint and SQL server 2008 express edition. First you need to enter the product key for SharePoint. Enter the product key and clicks continue. Now you need to accept the license agreement. Select the checkbox and click on continue. Select the installation type you want.   Now click on the standalone button. In production scenario, you need to select the server farm installation. This article only cover the first option, installing server farm is not in the scope of this article. Once you click on the standalone, the installation starts and you can view the progress as below. If any error occurred during installation, you will get the details and link to the log file. Refer log file and fix the corresponding issue and then start the installation again. If installation completes without any error, you will see the below screen. Make sure you selected the check box “Run the SharePoint products Configuration Wizard now” and click close. The SharePoint products configuration wizard starts. Click next; you will get the following warning Click yes and the configuration steps starts. You can view the progress for each step. Once completed the below screen appears to the user. Click finish to complete the installation. Now SharePoint installation is completed. You can navigate to SharePoint central administration website from the administrative tools and start building your portal. Good luck

  Read the article

• Don&rsquo;t Kill the Password

  - by Anthony Trudeau

  A week ago Mr. Honan from Wired.com penned an article on security he titled “Kill the Password: Why a String of Characters Can’t Protect Us Anymore.” He asserts that the password is not effective and a new solution is needed. Unfortunately, Mr. Honan was a victim of hacking. As a result he has a victim’s vendetta. His conclusion is ill conceived even though there are smatterings of truth and good advice. The password is a security barrier much like a lock on your door. In of itself it’s not guaranteeing protection. You can have a good password akin to a steel reinforced door with the best lock money can buy, or you can have a poor password like “password” which is like a sliding lock like on a bathroom stall. But, just like in the real world a lock isn’t always enough. You can have a lock, security system, video cameras, guard dogs, and even armed security guards; but none of that guarantees your protection. Even top secret government agencies can be breached by someone who is just that good (as dramatized in movies like Mission Impossible). And that’s the crux of it. There are real hackers out there that are that good. Killer coding ninja monkeys do exist! We still have locks on our doors, because they still serve their role. Passwords are no different. Security doesn’t end with the password. Most people would agree that stuffing your mattress with your life savings isn’t a good idea even if you have the best locks and security system. Most people agree its safest to have the money in a bank. Essentially this is compartmentalization. Compartmentalization extends to the online world as well. You’re at risk if your online banking accounts are linked to the same account as your social networks. This is especially true if you’re lackadaisical about linking those social networks to outside sources including apps. The object here is to minimize the damage that can be done. An attacker should not be able to get into your bank account, because they breached your Twitter account. It’s time to prioritize once you’ve compartmentalized. This simply means deciding how much security you want for the different compartments which I’ll call security zones. Social networking applications like Facebook provide a lot of security features. However, security features are almost always a compromise with privacy and convenience. It’s similar to an engineering adage, but in this case it’s security, convenience, and privacy – pick two. For example, you might use a safe instead of bank to store your money, because the convenience of having your money closer or the privacy of not having the bank records is more important than the added security. The following are lists of security do’s and don’ts (these aren’t meant to be exhaustive and each could be an article in of themselves): Security Do’s: Use strong passwords based on a phrase Use encryption whenever you can (e.g. HTTPS in Facebook) Use a firewall (and learn to use it properly) Configure security on your router (including port blocking) Keep your operating system patched Make routine backups of important files Realize that if you’re not paying for it, you’re the product Security Don’ts Link accounts if at all possible Reuse passwords across your security zones Use real answers for security questions (e.g. mother’s maiden name) Trust anything you download Ignore message boxes shown by your system or browser Forget to test your backups Share your primary email indiscriminately Only you can decide your comfort level between convenience, privacy, and security. Attackers are going to find exploits in software. Software is complex and depends on other software. The exploits are the responsibility of the software company. But your security is always your responsibility. Complete security is an illusion. But, there is plenty you can do to minimize the risk online just like you do in the physical world. Be safe and enjoy what the Internet has to offer. I expect passwords to be necessary just as long as locks.

  Read the article

• Calling XAI Inbound Services from Oracle BI Publisher

  - by ACShorten

  Note: This technique requires Oracle BI Publisher 1.1.3.4.1 which supports Service Complex Types. Web Services require credentials for authentication. Note: The deafults for the product installation are used in this article. If your site uses alternative values then substitute those alternatives where applicable. Note: Examples shown in this article are examples for illustrative purposes only. When building a report in Oracle BI Publisher it may be necessary to call an XAI Inbound Service to get information via the object rather than directly calling the database tables for various reasons: The CLOB fields used in the Object are accessible for a report. Note: CLOB fields cannot be used as criteria in the current release. Objects can take advantage of algorithms to format or calculate additional data that is not stored in the database directly. For example, Information format strings can automatically generated by the object which gives consistent information between a report and the online screens. To use this facility the following process must be performed: Ensure that the product group, cisusers by default, is enabled for the SPLServiceBean in the console. This allows BI Publisher access to call Web Services directly. To ensure this follow the instructions below: Logon to the Oracle WebLogic server console using an appropriate administrator account. By default the user system or weblogic is provided for this purpose. Navigate to the Security Realms section and select your configured realm. This is set to myrealm by default. In the Roles and Policies section, expand the SPLService section of the Deployments option to reveal the SPLServiceBean roles. If there is no role associated with the SPLServiceBean, create a new EJB role and specify the cisusers role, by default. For example:   Add a Role Condition to the role just created, with a Predicate List of Group and specify cisusers as the Group Argument Name. For example: Save all your changes. The XAI Inbound Services to be used by BI Publisher must be defined prior to using the interface. Refer to the XAI Best Practices (Doc Id: 942074.1) from My Oracle Support or via the online help for more information about this process. Inside BI Publisher create your report, according to the BI Publisher documentation. When specifying the dataset, under the Data Model Report option, specify the following to use an XAI Inbound Service as a data source: Parameter Comment Type Web Service Complex Type true Username Any valid user name within the product. This user MUST have security access to the objects referenced in the XAI Inbound Service Password Authentication password for Username Timeout Timeout, in seconds, set for the Web Service call. For example 60 seconds. WSDL URL Use the WSDL URL on the XAI Inbound Service definition as your WSDL URL. It will be in the following format by default:http://<host>:<port>/<server>/XAIApp/xaiserver/<service>?WSDLwhere: <host> - Host Name of Web Application Server <port> - Port allocated to Web Application Server for product access <server> - Server context for server <service> - XAI Inbound Service Name Note: For customers using secure transmission should substitute https instead of http and use the HTTPS port allocated to the product at installation time. Web Service Select the name of the service that shows in the drop-down menu. If no service name shows up, it means that Publisher could not establish a connection with the server or WSDL name provided in the above URL in order to get the service name. See BI Publisher server log for more information. Method Select the name of the Method that shows in the drop-down menu. A method name should show in the Method drop-down menu once the Web Service name is selected. For example: Additionally, filters can be used from the Web Service that can be generated, required or optional, from the WSDL in the Parameter List. For example:

  Read the article

• Release Management as Orchestra

  - by ericajanine

  I read an excellent, concise article (http://www.buildmeister.com/articles/software_release_management_best_practices) on the basics of release management practices. In the article, it states "Release Management is often likened to the conductor of an orchestra, with the individual changes to be implemented the various instruments within it." I played in music ensembles for years, so this is especially close to my heart as example. I learned most of my discipline from hours and hours of practice at the hand of a very skilled conductor and leader. I also learned that the true magic in symphonic performance is one where everyone involved is focused on one sound, one goal. In turn, that solid focus creates a sound and experience bigger than just mechanics alone accomplish. In symphony, a conductor's true purpose is to make you, a performer, better so the overall sound and end product is better. The big picture (the performance of the composition) is the end-game, and all musicians in the orchestra know without question their part makes up an important but incomplete piece of that performance. A good conductor works with each section (e.g. group) to ensure their individual pieces are solid. Let's restate: The conductor leads and is responsible for ensuring those pieces are solid. While the performers themselves are doing the work, the conductor is the final authority on when the pieces are ready or not. If not, the conductor initiates the efforts to get them ready or makes the decision to scrap their parts altogether for the sake of an overall performance. Let it sink in, because it's clear--It is not the performer's call if they play their part as agreed, it's the conductor's final call to allow it. In comparison, if a software release manager is a conductor, the only way for that manager to be effective is to drive the overarching process and execution of individual pieces of a software development lifecycle. It does not mean the release manager performs each and every piece, it means the release manager has oversight and influence because the end-game is a successful software enhancin a useable environment. It means the release manager, not the developer or development manager, has the final call if something goes into a software release. Of course, this is not a process of autocracy or dictation of absolute rule, it's cooperative effort. But the release manager must have the final authority to make a decision if something is ready to be added to the bigger piece, the overall symphony of software changes being considered for package and release. It also goes without saying a release manager, like a conductor, must have full autonomy and isolation from other software groups. A conductor is the one on the podium waving a little stick at the each section and cueing them for their parts, not yelling from the back of the room while also playing a tuba and taking direction from the horn section. I have personally seen where release managers are relegated to being considered little more than coordinators, red-tapers to "satisfy" the demands of an audit group without being bothered to actually respect all that a release manager gives a group willing to employ them fully. In this dysfunctional scenario, development managers, project managers, business users, and other stakeholders have been given nearly full clearance to demand and push their agendas forward, causing a tail-wagging-the-dog scenario where an inherent conflict will ensue. Depending on the strength, determination for peace, and willingness to overlook a built-in expectation that is wrong, the release manager here must face the crafted conflict head-on and diffuse it as quickly as possible. Then, the release manager must clearly make a case why a change cannot be released without negative impact to all parties involved. If a political agenda is solely driving a software release, there IS no symphony, there is no "software lifecycle". It's just out-of-tune noise. More importantly, there is no real conductor. Sometimes, just wanting to make a beautiful sound is not enough. If you are a release manager, are you freed up enough to move, to conduct the sections of software creation to ensure a solid release performance is possible? If not, it's time to take stock in what your role actually is and see if that is what you truly want to achieve in your position. If you are, then you can successfully build your career and that of the people in your groups to create truly beautiful software (music) together.

  Read the article

• Monitoring the Application alongside SQL Server

  - by Tony Davis

  Sometimes, on Simple-Talk, it takes a while to spot strange and unexpected patterns of user activity, or small bugs. For example, one morning we spotted that an article’s comment count had leapt to 1485, but that only four were displayed. With some rooting around in Google Analytics, and the endlessly annoying Community Server admin-interface, we were able to work out that a few days previously the article had been subject to a spam attack and that the comment count was for some reason including both accepted and unaccepted comments (which in turn uncovered a bug in the SQL). This sort of incident made us a lot keener on monitoring Simple-talk website usage more effectively. However, the metrics we wanted are troublesome, because they are far too specific for Google Analytics to measure, and the SQL Server backend doesn’t keep sufficient information to enable us to plot trends. The latter could provide, for example, the total number of comments made on, or votes cast for, articles, over all time, but not the number that occur by hour over a set time. We lacked a baseline, in other words. We couldn’t alter the database, as it is a bought-in package. We had neither the resources nor inclination to build-in dedicated application monitoring. Possibly, we could investigate a third-party tool to do the job; but then it occurred to us that we were already using a monitoring tool (SQL Monitor) to keep an eye on the database. It stored data, made graphs and sent alerts. Could we get it to monitor some aspects of the application as well? Of course, SQL Monitor’s single purpose is to check and monitor SQL Server, over time, rather than to monitor applications that use SQL Server. However, how different is the business of gathering and plotting SQL Server Wait Stats, from gathering and plotting various aspects of user activity on the site? Not a lot, it turns out. The latest version allows us to write our own custom monitoring scripts, meaning that we could now monitor any metric in the application that returns an integer. It took little time to write a simple SQL Query that collects basic metrics of the total number of subscribers, votes cast, comments made, or views of articles, over time. The SQL Monitor database polls Simple-Talk every second or so in order to get the latest totals, and can then store and plot this information, or even correlate SQL Server usage to application usage. You can see the live data by visiting monitor.red-gate.com. Click the "Analysis" tab, and select one of the "Simple-talk:" entries in the "Show" box and an appropriate data range (e.g. last 30 days). It’s nascent, and we’re still working on it, but it’s already given us more confidence that we’ll spot quickly trends, bugs, or bursts of ‘abnormal’ activity. If there is a sudden rise in comments, we get an alert, and if it’s due to a spam attack, we can moderate or ban the perpetrator very quickly. We’ve often argued that a tool should perform a single job well rather than turn into a Swiss-army knife, but ironically we’ve rather appreciated being able to make best use of what’s there anyway for a slightly different purpose. Is this a good or common practice? What do you think? Cheers, Tony.

  Read the article

• Speed up SQL Server queries with PREFETCH

  - by Akshay Deep Lamba

  Problem The SAN data volume has a throughput capacity of 400MB/sec; however my query is still running slow and it is waiting on I/O (PAGEIOLATCH_SH). Windows Performance Monitor shows data volume speed of 4MB/sec. Where is the problem and how can I find the problem? Solution This is another summary of a great article published by R. Meyyappan at www.sqlworkshops.com.  In my opinion, this is the first article that highlights and explains with working examples how PREFETCH determines the performance of a Nested Loop join.  First of all, I just want to recall that Prefetch is a mechanism with which SQL Server can fire up many I/O requests in parallel for a Nested Loop join. When SQL Server executes a Nested Loop join, it may or may not enable Prefetch accordingly to the number of rows in the outer table. If the number of rows in the outer table is greater than 25 then SQL will enable and use Prefetch to speed up query performance, but it will not if it is less than 25 rows. In this section we are going to see different scenarios where prefetch is automatically enabled or disabled. These examples only use two tables RegionalOrder and Orders.  If you want to create the sample tables and sample data, please visit this site www.sqlworkshops.com. The breakdown of the data in the RegionalOrders table is shown below and the Orders table contains about 6 million rows. In this first example, I am creating a stored procedure against two tables and then execute the stored procedure.  Before running the stored proceudre, I am going to include the actual execution plan. --Example provided by www.sqlworkshops.com --Create procedure that pulls orders based on City --Do not forget to include the actual execution plan CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails       FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID)       WHERE City = @City END GO SET STATISTICS time ON GO --Example provided by www.sqlworkshops.com --Execute the procedure with parameter SmallCity1 EXEC RegionalOrdersProc 'SmallCity1' GO After running the stored procedure, if we right click on the Clustered Index Scan and click Properties we can see the Estimated Numbers of Rows is 24.    If we right click on Nested Loops and click Properties we do not see Prefetch, because it is disabled. This behavior was expected, because the number of rows containing the value ‘SmallCity1’ in the outer table is less than 25.   Now, if I run the same procedure with parameter ‘BigCity’ will Prefetch be enabled? --Example provided by www.sqlworkshops.com --Execute the procedure with parameter BigCity --We are using cached plan EXEC RegionalOrdersProc 'BigCity' GO As we can see from the below screenshot, prefetch is not enabled and the query takes around 7 seconds to execute. This is because the query used the cached plan from ‘SmallCity1’ that had prefetch disabled. Please note that even if we have 999 rows for ‘BigCity’ the Estimated Numbers of Rows is still 24.   Finally, let’s clear the procedure cache to trigger a new optimization and execute the procedure again. DBCC freeproccache GO EXEC RegionalOrdersProc 'BigCity' GO This time, our procedure runs under a second, Prefetch is enabled and the Estimated Number of Rows is 999.   The RegionalOrdersProc can be optimized by using the below example where we are using an optimizer hint. I have also shown some other hints that could be used as well. --Example provided by www.sqlworkshops.com --You can fix the issue by using any of the following --hints --Create procedure that pulls orders based on City DROP PROC RegionalOrdersProc GO CREATE PROC RegionalOrdersProc @City CHAR(20) AS BEGIN DECLARE @OrderID INT, @OrderDetails CHAR(200) SELECT @OrderID = o.OrderID, @OrderDetails = o.OrderDetails       FROM RegionalOrders ao INNER JOIN Orders o ON (o.OrderID = ao.OrderID)       WHERE City = @City       --Hinting optimizer to use SmallCity2 for estimation       OPTION (optimize FOR (@City = 'SmallCity2'))       --Hinting optimizer to estimate for the currnet parameters       --option (recompile)       --Hinting optimize not to use histogram rather       --density for estimation (average of all 3 cities)       --option (optimize for (@City UNKNOWN))       --option (optimize for UNKNOWN) END GO Conclusion, this tip was mainly aimed at illustrating how Prefetch can speed up query execution and how the different number of rows can trigger this.

  Read the article

• Adventures in MVVM &ndash; ViewModel Location and Creation

  - by Brian Genisio's House Of Bilz

  More Adventures in MVVM In this post, I am going to explore how I prefer to attach ViewModels to my Views.  I have published the code to my ViewModelSupport project on CodePlex in case you'd like to see how it works along with some examples.  Some History My approach to View-First ViewModel creation has evolved over time.  I have constructed ViewModels in code-behind.  I have instantiated ViewModels in the resources sectoin of the view. I have used Prism to resolve ViewModels via Dependency Injection. I have created attached properties that use Dependency Injection containers underneath.  Of all these approaches, I continue to find issues either in composability, blendability or maintainability.  Laurent Bugnion came up with a pretty good approach in MVVM Light Toolkit with his ViewModelLocator, but as John Papa points out, it has maintenance issues.  John paired up with Glen Block to make the ViewModelLocator more generic by using MEF to compose ViewModels.  It is a great approach, but I don’t like baking in specific resolution technologies into the ViewModelSupport project. I bring these people up, not to name drop, but to give them credit for the place I finally landed in my journey to resolve ViewModels.  I have come up with my own version of the ViewModelLocator that is both generic and container agnostic.  The solution is blendable, configurable and simple to use.  Use any resolution mechanism you want: MEF, Unity, Ninject, Activator.Create, Lookup Tables, new, whatever. How to use the locator 1. Create a class to contain your resolution configuration: public class YourViewModelResolver: IViewModelResolver { private YourFavoriteContainer container = new YourFavoriteContainer(); public YourViewModelResolver() { // Configure your container } public object Resolve(string viewModelName) { return container.Resolve(viewModelName); } } Examples of doing this are on CodePlex for MEF, Unity and Activator.CreateInstance. 2. Create your ViewModelLocator with your custom resolver in App.xaml: <VMS:ViewModelLocator x:Key="ViewModelLocator"> <VMS:ViewModelLocator.Resolver> <local:YourViewModelResolver /> </VMS:ViewModelLocator.Resolver> </VMS:ViewModelLocator> 3. Hook up your data context whenever you want a ViewModel (WPF): <Border DataContext="{Binding YourViewModelName, Source={StaticResource ViewModelLocator}}"> This example uses dynamic properties on the ViewModelLocator and passes the name to your resolver to figure out how to compose it. 4. What about Silverlight? Good question.  You can't bind to dynamic properties in Silverlight 4 (crossing my fingers for Silverlight 5), but you CAN use string indexing: <Border DataContext="{Binding [YourViewModelName], Source={StaticResource ViewModelLocator}}"> But, as John Papa points out in his article, there is a silly bug in Silverlight 4 (as of this writing) that will call into the indexer 6 times when it binds.  While this is little more than a nuisance when getting most properties, it can be much more of an issue when you are resolving ViewModels six times.  If this gets in your way, the solution (as pointed out by John), is to use an IndexConverter (instantiated in App.xaml and also included in the project): <Border DataContext="{Binding Source={StaticResource ViewModelLocator}, Converter={StaticResource IndexConverter}, ConverterParameter=YourViewModelName}"> It is a bit uglier than the WPF version (this method will also work in WPF if you prefer), but it is still not all that bad.  Conclusion This approach works really well (I suppose I am a bit biased).  It allows for composability from any mechanisim you choose.  It is blendable (consider serving up different objects in Design Mode if you wish... or different constructors… whatever makes sense to you).  It works in Cider.  It is configurable.  It is flexible.  It is the best way I have found to manage View-First ViewModel hookups.  Thanks to the guys mentioned in this article for getting me to something I love using.  Enjoy.

  Read the article

• SQLAuthority News – Follow up on – Replace a Column Name in Multiple Stored Procedure all together

  - by pinaldave

  Last month I had a fantastic time with lots of puzzles and brain teasers, the amount of participation which I have received on the blog is indeed inspiring to write more. One of the blog post was about how to replace a column name in all the stored procedures. The article had very interesting conversation as a follow up. Please read the original article Replace a Column Name in Multiple Stored Procedure all together before reading this blog further as they are connected. Let us start few of the interesting comments. SQL Server Expert Imran Mohammed had a wonderful first and excellent note. I suggest all of you to read it. Imran stresses on the Data Modelling and Logical as well as Physical Design. Developers must create a logical design and get approval on naming convention, data types, references, constraints, indexes etc. He further suggested that one should not cut steps but must follow all the industry standards and guidelines. Here extended my blog post with following note – “Extending Pinal’s answer, what you can do is go to database properties, all tasks, scripts objects, in scripting wizard select all the stored procedure for which you want to change column name, export the query to a new window and then do find and replace, all in once window and execute the script. But make sure you check what you are replacing, sometimes column names are also used in table names, for ex:Table Name: Product and Column Name: ProductId, ProductName”. Thanks Imran Great Points!  Gatej Alexandru suggested that it is not good idea to DROP or CREATE but rather use ALTER as quite possible there may be permissions issue as well. Very good point let me see if I can write blog post over it. Vinay Kumar and SQLStudent144 have proposed another method to achieve the same. I am combining their solution and writing them here. Step 1. Press Ctrl+T or change “Result to Text” mode. Step 2. Execute below commands.SELECT 'EXEC sp_helptext [' + referencing_schema_name + '.' + referencing_entity_name + ']' FROM sys.dm_sql_referencing_entities('schema.objectname','OBJECT') Where schema.objectname is the object or table you are searching for. Step 3. Now copy the result and paste in new window. Again Press Ctrl+T or change “Result to Text” mode. Step 4. Copy the result and paste in new window. Execute the query. Step 5. Copy the result and paste in new window. Step 6. Now find your searching text in the script, make necessary changes and execute this script. Do not forget to remove the code which is generated in resultset which are not relevant to the T-SQL Script. Digitqr suggest we can do this for other objects besides Stored Procedure as well. Iosif suggests to use tool SQL Search from RedGate. I guess this sums it well. We have an alternative perspective to our original issue of replacing the column name in multiple stored procedure. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Silverlight Cream for May 08, 2010 -- #858

  - by Dave Campbell

  In this Issue: Phil Middlemiss, Jaime Rodriguez, Senthil Kumar, Mike Snow, DaveDev, Gergely Orosz, Kirupa, Cheryl Simmons, András Velvárt, Dan Wahlin, Michael D. Brown, and Ben Rush. Shoutouts: Erik Mork and crew have their latest up: This Week In Silverlight – Where’s the Tablet? Chris Rouw has a good link post and instructions on WCF RIA services: Deploying and Configuring Silverlight 4 and WCF RIA Services From SilverlightCream.com: Quick and Easy Sscalable Rounded Bevels Phil Middlemiss duplicates some bevel-edged rectangles in Blend, and they look great. Now you don't have to import all the other PhotoShop bits to get those things looking the way you want! A transparent Windows PHONE FAQ Jaime Rodriguez combined a bunch of information into a WP7 FAQ that he's going to keep up to date, so bookmark the page. He also has links to the Training Kit, on and offline versions. Windows Phone Developer Training Kit April Refresh is now available for Download Thanks to Senthil Kumar, I found out there is an April refresh of the WP7 Training kit at Channel 9 -- go get yours now --- I'll still be here when you get back! Silverlight Tip of the Day #16 – Working with IgnoreImageCache Mike Snow's Tip of the day #16 covers IgnoreImageCache and like many other things in life, until you read Mike's post you may be surprised at how it works. DoodlePad – A fun, free, sketching application for Windows Phone 7 DaveDev has a new WP7 App up that lets you or your kids 'Doodle' on the phone... could be a note, or could be a drawing... good post with all the links you need to get this cranked up on the emulator. Printing in Silverlight: Printing Charts and Auto Scaling Gergely Orosz's latest post is a very useful one on auto-scaling charts to fit a printed page and then getting them to print. Smoothly Scrolling a ListBox Check out the smooth scrolling Kirupa has on the ListBox near the top of his post... all good stuff... you wanna know how to do that! Plus... it's dead simple and all in Blend :) http://www.sparklingclient.com/wheres-the-silverlight-tablet/ Cheryl Simmons has a great tip up at the SilverlightSDK if you haven't burned through to figure it out yet ... changing the watermark on a DatePicker control... looks great! The story of a wicked bug András Velvárt tells a story of a bug that just defied logic or being found. Read how he tracked it down and what it actually was... could save you some time. Story learned: if I have a problem that bad, I'm calling András :) Text Trimming in Silverlight 4 Dan Wahlin gives a quick run-through of what TextBox trimming is, and then by a good real example... check it out and start using it in your projects. Enterprise Patterns with WCF RIA Services Michael D. Brown has an article in MSDN Magazine on RIA Services. Great information and link-packed article, with all the source avialable for download. Building Custom Players with the Silverlight Media Framework Ben Rush has a nice long tutorial on the Silverlight Media Framework up on the MSDN Magazine site ... lots of information in there. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• The Java Community Process: What's Broken and How to Fix It

  - by Tori Wieldt

  In a panel discussion today at TheServerSide Java Symposium, Patrick Curran, Head of the Java Community Process, James Gosling, and ?Reza Rahman, member, Java EE 6 and EJB 3.1 expert groups, discussed the state of the JCP. Moderated by Cameron McKenzie, Editor of TheServerSide.com, they discussed what's wrong with JCP and ways to fix it.What's wrong with the JCP? Reza Rahman was quite supportive of the JCP. "I work as a consultant, and it's much better than getting a decision made a large company," Reza commented. He gave the JCP "Five stars" and explained that as an individual, he was able to have an impact on things that mattered to him. Cameron asked, "Now all these JCP problems came after Oracle acquired Sun, right?" To which the crowd had a good laugh, and the panel all agreed many of the JCP problems existed under Sun. How is the JCP handled differently under Oracle than Sun? "Pretty similar," said James. Oracle "tends more towards practicality" said Reza. "I'm glad to see things moving again, we've got several new JSRs filed," Patrick commented.How to Fix It?They all agreed greater transparency is a top issue. Without it, people assume sinister behavior whether it's there or not. Patrick said that currently spec leads are "encouraged" to be transparent, and the JCP office is planning to submit JSRs to change the JCP process so transparency is mandated, both for mailing lists and issue tracking. Shining a light on problems is the best way to fix them.Reza said the biggest problem is lack of a participation from the community. If more people are involved, a lot of the problems go away. "Developers are too non-chalant, they should realize what happens in the JCP has an direct impact on their career and they need to get involved." Reza commented.Got Involved!During Q&A, someone asked how a developer could get involved. They answered: Pick a JSR you are interested in and follow it. To start, you could read an article about the JSR and comment on the article (expert group members do read the comments). Or read the spec, discuss it with others and post a blog about it. Read the Expert Group proceedings. Join the JCP (free for individuals). Open source projects have code that you can download and play with, download it and provide feedback. Patrick mentioned that the JCP really wants more participation. "One way we are working on it is that we are encouraging JUGs to join the JCP as a group, and that makes all members of the JUG JCP members," Patrick said.They commented that most spec leads are desperate for feedback. "And, please get involved BEFORE the spec is finalized!" James declared. Someone from the audience said it's hard to put valuable time into something before it's baked. Patrick explained that Post Final Draft (PFD) is the time in the JCP process when the spec is mature enough to review but before the spec is finalized. The panel agreed the worst thing that could happen is that most people in the Java community just complain about the JCP without getting involved. Developer Sumit Goyal, conference attendee, thought it was a healthy discussion. "I got insights into how JSRs are worked on and finalized," he said.Key LinksThe Java Community Process Website  http://jcp.org/en/home/indexArticle: A Conversation with JCP Chair Patrick Curran Oracle Technology Network http://www.oracle.com/technetwork/java/index.htmlTheServerSide Java Symposium  http://javasymposium.techtarget.com/

  Read the article

• Implementing Database Settings Using Policy Based Management

  - by Ashish Kumar Mehta

  Introduction Database Administrators have always had a tough time to ensuring that all the SQL Servers administered by them are configured according to the policies and standards of organization. Using SQL Server’s  Policy Based Management feature DBAs can now manage one or more instances of SQL Server 2008 and check for policy compliance issues. In this article we will utilize Policy Based Management (aka Declarative Management Framework or DMF) feature of SQL Server to implement and verify database settings on all production databases. It is best practice to enforce the below settings on each Production database. However, it can be tedious to go through each database and then check whether the below database settings are implemented across databases. In this article I will explain it to you how to utilize the Policy Based Management Feature of SQL Server 2008 to create a policy to verify these settings on all databases and in cases of non-complaince how to bring them back into complaince. Database setting to enforce on each user database : Auto Close and Auto Shrink Properties of database set to False Auto Create Statistics and Auto Update Statistics set to True Compatibility Level of all the user database set as 100 Page Verify set as CHECKSUM Recovery Model of all user database set to Full Restrict Access set as MULTI_USER Configure a Policy to Verify Database Settings 1. Connect to SQL Server 2008 Instance using SQL Server Management Studio 2. In the Object Explorer, Click on Management > Policy Management and you will be able to see Policies, Conditions & Facets as child nodes 3. Right click Policies and then select New Policy…. from the drop down list as shown in the snippet below to open the  Create New Policy Popup window. 4. In the Create New Policy popup window you need to provide the name of the policy as “Implementing and Verify Database Settings for Production Databases” and then click the drop down list under Check Condition. As highlighted in the snippet below click on the New Condition… option to open up the Create New Condition window. 5. In the Create New Condition popup window you need to provide the name of the condition as “Verify and Change Database Settings”. In the Facet drop down list you need to choose the Facet as Database Options as shown in the snippet below. Under Expression you need to select Field value as @AutoClose and then choose Operator value as ‘ = ‘ and finally choose Value as False. Now that you have successfully added the first field you can now go ahead and add rest of the fields as shown in the snippet below. Once you have successfully added all the above shown fields of Database Options Facet, click OK to save the changes and to return to the parent Create New Policy – Implementing and Verify Database Settings for Production Database windows where you will see that the newly created condition “Verify and Change Database Settings” is selected by default. Continues…

  Read the article

• Using 3G/UMTS in Mauritius

  After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

  Read the article

• Pimp my Silverlight Firestarter

  - by mbcrump

  So Silverlight Firestarter is over and your sitting on your couch thinking… what now? Well its time to So how exactly can you pimp the Silverlight Firestarter? Well read below and you will find out: 1) Pimp the videos: First we are going to use a program named Juice to download all of the Silverlight Firestarter videos. Go ahead and point your browser to http://juicereceiver.sourceforge.net/ and download the application. It works on Mac, Linux and PC. After it is downloaded you are going to want to add an RSS feed by clicking the button highlighted below. At this point you are going to want to add the following URL inside the textbox and hit Save: http://channel9.msdn.com/Series/Silverlight-Firestarter/RSS This RSS feed includes all the Silverlight Firestarter Labs and Presentations located below. The Future of Silverlight Data Binding Strategies with Silverlight and WP7 Building Compelling Apps with WCF using REST and LINQ Building Feature Rich Business Apps Today with RIA Services MVVM: Why and How? Tips and Patterns using MVVM and Service Patterns with Silverlight and WP7 Tips and Tricks for a Great Installation Experience Tune Your Application: Profiling and Performance Tips Performance Tips for Silverlight Windows Phone 7 Select all the videos and click the Download button located below (has blue arrow): Once all the videos are downloaded you will have about 4.64GB of Silverlight fun. You can now move these videos to your MediaServer and watch them with whatever device you want. Put it on an iPad, iPhone.. emm wait I mean WP7 or WMC7.  2) Pimp the Training Material – Download the offline installer for the labs here. This will give you almost a gig of free training materials. Here is the topics covered: Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7 You will notice that it install Firestarter to the default of C:\Firestarter. So you will have to navigate to that folder and double click on Default.htm to get started. Now if you followed part one of the pimping guide then you will already have all the videos on your pc. You will notice that once you go into the lab you will get a Lab Document and Source at the bottom of the article. Now instead of opening the Source Folder in a web browser you can just copy the folder C:\Firestarter\Labs into your Visual Studio 2010 Project Folder. This will save a lot of time later.   3) Pimp my Silverlight 5 Knowledge – Always keep reading as much as possible and remember that the Silverlight 5 Beta should come Q1 of 2011 and the final release at the end of 2011. Here are 5 great blog post on Silverlight 5. Scott Gu’s Blog Mary Jo’s Article on Silverlight 5 The Future of Silverlight (Official) Kunal Chowdhury Blog Tim Heuer’s Blog Thats all that I got for now. Have fun with all the new Silverlight content.  Subscribe to my feed

  Read the article

• December 3 is Stephanie Choyer Day

  - by rickramsey

  I don't answer Stephanie Choyer's email just so I can enjoy her French accent when she calls. "Reek! Reek! Why do joo not answer my eemails?" Without the French, life on Earth would be so much poorer. No, they don't bring to the party any motorcycles that grow chest on your hair, and the Citroen is such a frightening study in Automobile design that I don't dare climb inside one. But they have French architecture. French sidewalks. French villages. The French Alps. Grenoble. French cheese. French wine. And that glorious French accent. If I were French, I'd spend all my time enjoying being French. Which makes the work that Stephanie does day in and day with our hard-edged technologies and stubborn technologists so admirable. Oracle Solaris 11 Resources for Sysadmins and Developers The page in the link above represents the work of many people, but it was Steph who rounded them up. And it wasn't easy. I know, because I ran and hid from her on many, many occasions. But she was tireless. "Reek. Reek. Why have you not published Glynn's article? Pleeeease, you must!" Remember when tech companies gave you a simple choice? You could either read the 27,000 pages of documentation or a double-sided data sheet. Which will it be, pal? Then they started writing white papers. 74 pages of excellent prose did a beautiful job of explaining why the technology was fantastic, but never told you how to use it. Well, have you taken a look at these? How-To Technical Articles for System Admins and Developers Now you can get wicked excited about a cool technique described in a 74-page white paper, and find a technical article that shows you exactly how to use it. The wicked smart marketing folks on the Oracle Solaris team wrote them, but it was Steph who bribed them with a Cabernet or beat them over the head with a baguette until all that work was finished and posted on OTN. There are songs about French wine, but not about French vintners. There are songs about French cities, but not about French bricklayers. About French sidewalks, but not about the French policemen who keep them safe. As far as I know, there are no songs about OTN, but if there were, they would probably neglect to mention Steph. Which is why today, Dec 3rd, we celebrate Stephanie Choyer Day. We dedicate this day to our relentless, hardworking, tireless, patient and friendly French colleague with the delightful accent. If I knew how to speak French, I'd say "Thanks for all you do" in French. But I don't speak French. And I don't trust online translations. I'd probably wind up saying "My left foot yearns for curdled milk." So here it is in plain old English: Thank you, Stephanie. psssst! about that documentation and those white papers ... In case you haven't noticed, the Oracle Solaris doc team has done some pretty cool things with the Solaris docs. And those white papers are interesting reading, well worth setting aside some time. Because with Solaris, as you know, it's not just about getting by with a rudimentary grasp of the basics. It's about the amazing stuff savvy sysadmins and developers can do when they really understand it. Find them here: White Papers Documentation And don't forget training! - Rick Website Newsletter Facebook Twitter

  Read the article

• Healthcare and Distributed Data Don't Mix

  - by [email protected]

  How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >