Search Results

Search found 6706 results on 269 pages for 'power supply'.

Page 164/269 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

  - by user33521

  We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

  Read the article

• MacBook says to replace battery. Should I?

  - by Palantir

  Hi! My MacBook says that battery is not charging, and the battery is completely empty (in fact, pressing the button on the battery illuminates no LEDs). If I plug the power adapter off the mac shuts off immediately. I tried with a spare adapter, and it won't charge it. System information says it has 380 cycles. The battery is 2.5 years old. System profiler says the battery has 0 mAh of capacity, and that it should be replaced. Should I just buy a new battery, or should I bring it to an apple point, and leave it there? They can take a look at it (it's on AppleCare), they told me that they will repair it is there is anything wrong with the charging circuit, but they won't give me a new battery. They will keep the laptop for 10 working days at least... I hate when this happens :P

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• Configure php mail() on Windows/IIS

  - by Adam Tuttle

  I have a Windows Server 2003 / IIS web server running various application servers, and ended up begrudgingly adding PHP into the mix. I know Win/IIS isn't the ideal environment for PHP, but it's what I've got and I need to make it work. From phpinfo(): Configuration File (php.ini) Path: C:\WINDOWS Loaded Configuration File: C:\php\php.ini From C:\php\php.ini: [mail function] ; For Win32 only. SMTP = localhost smtp_port = 25 ; For Win32 only. ;sendmail_from = [email protected] ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ;sendmail_path = ; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_parameters = Lastly, I have IIS setup to run an SMTP relay that allows connection and relay, but only from localhost. But when I try something that uses mail(), I get this error: The e-mail could not be sent. Possible reason: your host may have disabled the mail() function... Any ideas?

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• Tracking down random BSOD on windows 7

  - by pehrs

  I have gotten a computer running windows 7 handed to me that randomly, several times a day, bsods with a PAGE_FAULT_IN_NONPAGED_AREA (50) or WHEA_UNCORRECTABLE_ERROR (124). Crashes happens regardless of load. I am running out of ideas for how to track this down. Analyzing the minidumps shows the crash to be in ntkrnlmp.exe/WMIADAP.exe System has plenty of power (600w) Ram checks out fine using memtest86+ over a weekend. System is clean inside. No dust build up. Temperatures stay low. As far as I know (and reliability history shows) no new drivers were installed for several months before the problems started. All drivers are now up to date. sfc /scannow reports the system as clean. CHKDSK reports the disks as clean Removing the AV (Avast) has no effect. Any more things that should be tried on windows 7 before I start replacing the hardware?

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Vista Screen resolution Changes when Switching Users

  - by Benjol

  I regularly have a problem when switching between users in Vista - the screen resolution drops down to 800x600. If I try to set the resolution back to the maximum, it says nothing, but just keeps it at 800x600. I can set it back to an intermediate value. Otherwise I have to either restart the PC, or sometimes if I log off one of the users, I can then set the resolution back to max. Might it also have something to do with using sleep mode instead of performing regular shutdowns? I thought it might be related to the desktop background image taking up too much space, but even with plain colours, the problem still occurs. There is an enormous thread on this here, but not really any answers. From what I can gather from that thread, it isn't related to any particular applications, nor limited to a particular make of graphics card or monitor, so I don't think that including hardware details is useful. This is a very annoying problem, as it screws up my desktop and screen layout every single time. Has anyone here experienced this problem or found a solution? I've noticed that Windows Update has tried to install nVidia updates and apparently they've failed on several occasions. Not sure if that is of any relevance or not. UPDATE The last post on the thread: FWIW - I had this problem for about 2 years and wrote a number of posts in this thread in the past. It survived OS reinstallation, change of practically all of my hardware piece by piece (mobo, cpu, monitor, graphics card, memory, power supply...) I used to be affected by this annoying problem at least once every 24-48 hours. About 1.5 months ago I wiped out my 32 bit vista ultimate installation and installed Windows7 ultimate 64 bit from scratch and never saw this problem again. GOOD RIDDANCE. Vista was a pathetic piece of __ that felt like a flashback to the old [horrible] NT4/Windows95 days. I was seriously considering switching over to Apple/Mac OSX if this problem persisted.

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now; no problems so far (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• FTP Server with advanced features

  - by Nikolas Sakic

  Hi, We supply zone-files to our customers. Some zone files are big about 300MB and some are quite small, maybe like 1MB. We had this issue that someone setup a script to continually download the file. Imagine downloading 300MB file a few hundred times a day. Since, we don't have packet-shaper to throttle the traffic, we need to upgrade ftp server and use add-on modules to limit the download somehow. We currently use proftpd server. Also note that there are different users for different domains - say, if you want to download zone file for .INFO domain, then you use a particular user. That user can't download any other zone's file. This is what we are looking for: Have maximum of 400MB download per user per day. Or even have different download limit for different users per day. Have one connection per user at any time. Max # of connection (non-simultaneous) per user per day is 5. Anyone trying to exceed that gets banned for 24 hours. Has anyone used FTP server with similar restrictions above? Does anyone have any ideas where I can start? Any help would be appreciated. Thanks. -N

  Read the article

• How to use my computer to control a lamp?

  - by nona urbiz

  I've been researching computer automation systems, but everything I've found has been overkill for what I'm interested in. Can anyone help me control a lamp that is on my desk, plugged in the wall beneath the desk, with my computer (also on the desk, usually). What got me thinking is that I have the lamp plugged into a Belkin extension cord/surge protector that came with a wireless switch that toggles the power going to 6 of the eight sockets. Can I somehow hook my computer into this? I'm not too afraid to get into some wiring type thing, but do have a somewhat limited budget. It'd also be cool to get a dimmer in the loop too. thanks aha. after more research, i have realized what i'm looking for is instructions for a DIY version of this that won't look so ugly, and that i can build a UI for rather than shortcuts.

  Read the article

• PC will be turned off in safe mode

  - by abbasi

  I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• Can't get PHP script to run when launched from Aptana Studio

  - by samuel

  I've been using notepad++ for web development (currently html, css, and some php and mysql). I decided to dive into an IDE to see if I could cut down on development time and have more power than notepad++. I grabbed Aptana yesterday and, after harassing it for a few hours, have finally gotten everything up and running. The only problem is that my web pages, which are .php's, do not execute any of their included .php code in the browser. as an example: <?php echo "IT WORKS WOOO"; ?> ought to print IT WORKS WOOO smack in the middle of my blank test page, and yet it does not. I checked to see if I had somehow forgotten how to do an echo statement and ran it on my desktop, using notepad++, and it worked just fine. I have the php plugin, have used the php perspective to write it and have launched it as a php web page, but nothing makes it execute the php within. Any ideas?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• Regarding the battery of a new laptop [closed]

  - by Majed

  Possible Duplicate: Is it better to use a laptop on battery or on AC power? I bought a new laptop from HP. I am not sure if I should remove the battery while I am working on my laptop or not. What is better for my laptop battery, to keep it while the laptop is plugged in or to remove it? or to charge it and then pull out the plug and when the battery is flat then plug it again? I use my laptop alot (at home and sometimes at work as well).

  Read the article

• Time Machine (archive) of pre-Leopard systems?

  - by benc

  I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

  Read the article

• What are the mandatory Linux kernel modules to run inside of ESXi

  - by Marcin

  I'm used to rolling my own kernels for servers, as it nicely minimizes the number of exploits (and the resulting patches) to take care of. In a traditional (bare metal) world, the whole process is about knowing what you have (hardware), and what you need (Ethernet, IPv4, iptables, etc.) In a virtualized environment, some things stay the same (still need Ethernet and IPv4), some things go away (power management), and then there are some new needs (vxnet3, or vmware-tools, even though that's compiled outside of the kernel). So my question mostly concerns itself with the last two categories: what can I remove completely, and what new stuff do I want? For example, what IO scheduler do I want, if all my disk operations are going through another filesystem/scheduler/cache to get to the virtual disk? Do I need hyper-threading enabled, or is the VM going to show them to me anyway as a CPU anyway? Do I need Large Receive Offload turned on, or is that something that the hypervisor's network drivers are going to do for me?

  Read the article

• How to change or remove all traces of original author name in Excel 2010 document

  - by Adam Ryczkowski

  At our company we need to deploy one Excel Workbook in that way that nobody would see it is made by us by looking at the Office metadata. What fields do we need to look for? I know, that the document has track of original writer and the last save author. But is it all? I guess there might be some hidden properties, that might give our company name. Where to look for such fields? Is there any good editor available, or will explorer's property page give enough power? I use Excel 2010

  Read the article

• Authenticate domain-user credentials on unjoined virtual machine?

  - by bwerks

  Hi all, This question may sound silly, and perhaps a bit insane, but--is there any way to run a process on a machine not joined to a domain using credentials from a user in that domain? In my case, I'm running virtual machines installed with release binaries from our build process, as well as Visual Studio. Visual Studio is there to debug our release binaries, however it's being executed with vm-local user credentials. This means that it can't authenticate to our TFS deployment when executing "tf.exe view" to utilize our Source Server for debugging. Team Explorer manages to authenticate to TFS using a UI prompt, however I suspect that it's because we supply it with the TFS deployment's URI, and it's designed to display a prompt to facilitate workgroup scenarios; i.e. it's not like we're getting it for free. My instincts tell me the only way to authenticate on this vm is to join it or somehow form a one-way trust or something, but is there an easier way? For automation we're going to want to script this eventually, but I'm first surveying the feasibility of the thing.

  Read the article

• How to get access to console to reset Cisco 3750?

  - by genehack

  I acquired two Cisco 3750 switches from another part of my organization. I was able to complete the standard password/config reset procedure on one without any issues -- boot it, put it into express config mode, telnet in, reset the passwords, etc. The second one doesn't ever boot to the point where it displays anything on the console. When power cycled, the 'SYST' light flashes green a few times, then comes on a solid green and stays lit. None of the other lights ever flash or light up. Holding down the 'MODE' button for up to 30 seconds produces no noticeable effects. Nothing ever comes out on the console. Since I was able to configure the first one without any problems, I know my connectinon is good -- console port configured right, good cable, etc. Is this just a hardware problem with the switch? Is there any way I can recover from this and get the switch back into a state where I can configure it?

  Read the article

• Any way to disable specific CPU sleep modes?

  - by Philippe

  I just got a new Toshiba Tecra S11 notebook, which has a Core i5 520M CPU, and it appears to suffer from a well-known problem: a high pitched noise when the CPU is idle. Googling around revealed that this is caused by a specific power-saving mode in the CPU. In most cases, C4 mode is blamed for the noise. So my question is: is it possible to disable C4 mode (or any other "sleep" mode) using some utility or BIOS setting? I don't mind if it hurts battery life. I'd appreciate any advice on this matter. It's driving me crazy.

  Read the article

• In general, do 3rd-party laptop AC adapters / chargers work reliably?

  - by MGOwen

  The AC adapters for my 2 dell laptops wore out very quickly. One supplies power but won't charge the battery (it's about 3 years old, the other is a bit newer). Both have worn through to the shielding around the notebook connector and look like they'll be unusable soon. Checking user reviews of the replacement adapter on Dell's own website, it appears they usually fail this fast. Apparently Dell does this deliberately to make money (their adapters sell for about 10-15 times what they cost to make). Same with replacement batteries. I can see there are plenty of much cheaper ($50 less) compatible AC adapters on eBay. Does anyone have experience with these? Naturally I'm nervous a crappy knock-off could fry my notebook, but has this ever actually happened to anyone recently? Has anyone had a good experience? Can anyone recommend a good online seller (who doesn't charge nonsensical shipping costs to Australia, preferably?)

  Read the article

• Installing a 3.5" hard drive in a 2.5" bay?

  - by Javawag

  I know this question seems ridiculous, but my server (actually a Mini-ITX computer) has a 2.5" hard drive bay and an empty CD-ROM bay underneath it. If I removed the hard drive bay, I could probably mount a 3.5" hard drive in the CD-ROM bay which is unused... I know it's a big of a kludgy way to do things but it does mean upgrading the hard drive to 2TB is much cheaper. My question is: are the power requirements of a 3.5" disk the same as 2.5" one? I know the connectors physically will still fit, but I don't want to destroy my server!

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >