Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 164/279 | < Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >

• unable to mount read-only DVD with photos

  - by nevil

  I have a working Samsung CD/DVD player with (SATA connection) and i'm running latest updated version of 12.04. Audio CDs and video DVDs appear in the devices sidebar, but I have a DVD from a professional photographer with pictures of my daughter and friends which will just not open. When I try to mount in terminal I get the following message: mount: block device /dev/sr0 is write-protected, mounting read-only mount: you must specify the file system type I am assuming it's JPEG. What should I do next? I have looked through previous questions in this area but none seems to address this particular problem. Thanks for any help.

  Read the article

• How do you fix "failed command: IDENTIFY DEVICE" showing up in dmesg?

  - by Neil

  I just got a new Mushkin 60gb SSD, and it's now my primary drive in the ata1 spot. I've been getting these failed command: IDENTIFY DEVICE errors which are preventing rebooting and shutdown. Does anyone know what these could be caused by, or how to start troubleshooting? I've tried these kernels: 2.6.32-22-generic 2.6.31-17-generic And they both have the same error. Here is a link to my entire dmesg. And the relevant ata1.00 parts below: [ 59.804237] ata1: drained 256 bytes to clear DRQ. [ 59.804244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 59.804249] ata1.00: failed command: IDENTIFY DEVICE [ 59.804254] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in [ 59.804256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.804258] ata1.00: status: { DRDY } [ 59.804264] ata1: hard resetting link [ 59.804266] ata1: nv: skipping hardreset on occupied port [ 60.272036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.352193] ata1.00: configured for UDMA/133 [ 60.352204] ata1: EH complete

  Read the article

• Well supported Hardware Raid Controller

  - by ftiaronsem

  Hello alltogether I am currently planning to buy a hardware-raid controller. This became necessary since I am running Linux and Windows in parallel and now need the redundancy for both OS (Im am going to use RAID1 / Mirroring). Therefore I am searching for a hardware raid controller which is well supported by linux / ubuntu (reporting smart values, stats for the harddrives, etc...). This controller should have four sata ports and if possible it should fit in a PCIE-1x Slot. I would greatly appreciate, if you could suggest some devices. Thanks in advance

  Read the article

• adding hard drive failed

  - by dennis ditch

  i was using von welch's instructions at http://v2kblog.blogspot.com/2007/05/adding-second-hard-drive.html] to install a 500 gig seagate drive to write the recordings to. everything seemed to be going ok until mkfs /dev/sdb1 then we get an error message mkfs.ext2: inode_size (128) * inodes_count (0) too big for a filesystem with 0 blocks, specify a higher inode_ratio (-i) or lower inode count (-N) my son is trying to help me but this is beyond him. our knowledge of unix/linux is very limited. at work the support people just sent me a line by line cook book. i would appreciate any help you can give us. the computer is a gateway mdp e4000 . mythbuntu is installed on a pata drive and we are adding a sata drive for the second drive. the bios sees the drive.

  Read the article

• Installation of Ubuntu 12.04 LTS is Crashing from Live CD

  - by Daniel Evans

  Hardware: Dell Inspiron 1545 Steps are as follows: Insert Ubuntu 12.04 disc Boot computer Output is as follows error: unexpectedly disconnected from boot status daemon Generating locales... en_US.UTF-8... done Generation complete. ***MEMORY-ERROR***: glib-compile-schemas[569]: GSlice: assertion failed: aligned_memory == (gpointer) addr Aborted pwconv: failed to change the mode of /etc/passwd- to 0600 ***MEMORY-ERROR***: [996]: GSlice: assertion failed: aligned_memory == (gpointer) addr ***MEMORY-ERROR***: glib-compile-scehmas[1034]: GSlice: assertion failed: aligned_memory == gpointer) addr Aborted /usr/lib/python2.7/dist-packages/LanguageSelector/LocaleInfo.py:256: UserWarning: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory warnings.warn(msg.args[0].encode('UTF-8')) Using CD-ROM mount point /cdrom ... etc etc... End up at a prompt line ubuntu@ubuntu:~$ The computer's self tests have given the following three errors (so far): Error Code OFOO:O65D Msg DISK-DST Self-test read error SATA Disk S/N=.... Confidence Test Fail Error Code 0F00:1332 Msg: DISK- Block 418047942: Interrupt Request (IRQ) Error Code: 0142 HD0 self test unsuccessful Status 79

  Read the article

• Packard Bell Easynote NJ65 not saving gamma Setup.

  - by Pablo Gomez

  Hi. There seems to be a issue with the Easynote range of PB laptops. Since Ubuntu 10.10 does not use a Xorg.conf file to save your gamma / resolution /brightness setting, everytime I turn on my laptop I have to open up a terminal window and use the x-gamma command to set it up to my personal preference. Is there a way to create a configuration file which can save that into the system everytime I load up the OS? When I used to have a Compaq Presario (an F564LA with integrated nVIDIA graphics), I could save a config. file into the system which loaded up everything on startup To those who don't know the spec's for a NJ65 laptop, I'll provide them Processor: Intel® Pentium Dual Core @ 2.2 GHZ Video: Integrated Intel® GMA 4500MHD graphics HDD: 320GB SATA RAM: 2GB DDR2

  Read the article

• Is Dell Inspiron 15R Special Edition compatible with Ubuntu?

  - by Obada Talal Abu Arisheh

  I want to buy a Dell Inspiron 15R Special Edition. On ubuntu.com, it says that Dell Inspiron 15R will work properly. But the special edition has some special issues. I will list the hardware: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB2 Dual Channel DDR3 SDRAM at 1600MHz 750GB 7200 RPM SATA Hard Drive 8X Tray Load CD/DVD Burner (Dual Layer DVD+/-R Drive) AMD Radeon™ HD 7730M 2GB Built-in Skullcandy™ stereo speakers and Waves MaxxAudio® 4 technology Will it have any problem?

  Read the article

• Ubuntu installer doesn't see internal hard drive on DELL Vostro 3360

  - by valk

  I just received a new DELL Vostro 3360, it has Windows 7 preinstalled. When it comes to the partition window I can't see the hard drive there. I see only /dev/sda or /dev/sdb (either one and in both cases it's a usb drive from which I'm installing). I tried every imaginable BIOS configuration. Tried to change the SATA mode to ATA, DHCI and more. EDIT: I tried to install with standard Ubuntu 12.04 32 bit, and 11.10 64 bit official versions. No luck. I'll appreciate any suggestion.

  Read the article

• Lenovo B570 doesn't boot after installation

  - by Alan

  I install my Ubuntu 11.10 64 Bits in my Notebook Lenovo B570. (I remove Win 7). I have no problems to install. But at finish, when it start, it wont boot. It search for another boot device (Network, CD/DVD). Maybe it issue is about SCSI Hard Drive. I try in BIOS set compatible mode SCSI/ATA. It try locate another boot (Networks, CD/DVD). I try to enable compatible mode in BIOS SCSI - SATA and reinstall again. "Will ubuntu be the only os on your computer or is there a 2nd os?" A:Yes. I remove Windows 7 and use All disc to Ubuntu.

  Read the article

• Virtualbox will run from 32bit installation CD but not 64bit.

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Unable to recognize hard drive after replacing a drive

  - by Peter Schriver

  I have a Poweredge 830 that I had been using with 1 OS Sata drive and 3 data drives. One of the drives had some failing sectors so I replaced it with a different drive. For some bizarre reason the computer would not reboot so I disconnected all of the media drives and did a clean reinstall on the OS drive. Only the boot drive and one of the media drives are now recognized by my Bios. Drive 0 and 2. Drive 1 and 3 are listed in the Bios as "Unkown Device" Any help would be appreciated I think there may be something wrong with the install. For some reason when I attempt to change the display it says I have a laptop.If you think a reinstall is in order I will try that.

  Read the article

• Error installing Windows7 64 bits on VirtualBox

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Not able to suspend or hibernate

  - by Tim

  My Ubuntu 10.10 on my laptop Lenovo T400 is not able to suspend or hibernate. Whenever I click Suspend or Hibernate, the moon LED on the bottom of the lid flashes a few seconds, the screen quickly shows something like "some devices fail to suspend, error 5", and then the moon LED goes off and the display still has ambient light illumination. I suppose in suspend or hibernation state, the display should have no illumination, just like when the laptop is turned off, right? If I press any key, the unlock screen dialogue will pop out. I searched a little on the internet, and installed 'acpi-support' according to some advice but it does not help. Any suggestions to solve this problem? Thanks and regards! ADDED: Laptop specifications: CPU Intel Mobile Core 2 Duo P8800 @ 2.66GHz Penryn 45nm Technology RAM 1.9GB Single-Channel DDR3 @ 532MHz (7-7-7-20) Motherboard LENOVO 2764CTO (None) Graphics ThinkPad Display 1440x900 @ 1440x900 ATI Mobility Radeon HD 3400 Series (Lenovo) Hard Drives 244GB Western Digital WDC WD2500BEVS-08VAT2 (SATA) Optical Drives HL-DT-ST DVDRAM GSA-U20N AZCDW EFCPUZ452 SCSI CdRom Device AZCDW EFCPUZ452 SCSI CdRom Device Audio Conexant 20561 SmartAudio HD

  Read the article

• How do I configure my 2 RAID drives so I can use it as /home?

  - by Kenn

  I've installed Ubuntu 11 64-bit to a 2 TB drive. it is on /dev/sda - port 1 of SATA Host Adaptor. This contains /dev/sda1 (1 MB boot), /dev/sda2 (2TB EXT4), /dev/sda3 8.6GB SWAP. I also have: /dev/sdb 2TB RAID COMPONENT /dev/sdc 2TB RAID COMPONENT which also show as /dev/dm-0 not partitioned /dev/dm-2 not partitioned which is mounted as /media/RAID_HOME I'm completely stumped as to how to use this version of Ubuntu to make these drives seem as just one raid mirrored drive and then how to transfer /home onto it.

  Read the article

• Unable to Mount Seagate Array from Iomega

  - by GE Cardiff

  I am new to Ubuntu so please be kind! My (Windows based) Iomega Storcentre ix2-200 stopped working, with all my business data upon it. Iomega helpfully told me that I should get Fedora, remove the Seagate hard drives and recover the information by connecting via a USB / SATA cable. First I could not get Fedora to load (due to it needing an Internet connection before loading complete) so I got Ubuntu - much easier to load. Software seems fine, and in "Computer" there is an "Array" icon - this is clearly the Seagate hard drive I have connected. It will not, however, Mount. "Unable to mount location, can't mount file". Any help gratefully received! As a slight aside, I can't seem to find "terminal" in this version of Ubuntu?

  Read the article

• Which hard disk drive is which?

  - by djeikyb

  I want to know which hard disk drive corresponds to which device path. It's trivial to match the hard disk stats (brand, size) with the dev path, but I want more. I want to know which drive is which inside my case. What's a good way to go about getting this info? I would prefer not to tear apart my server to remove all the drives, then add back one by one. I am willing to preform reboots. The drives are inconveniently scrunched together in the case. The label information is hidden. I can open the case. Most disks are SATA, so theoretically hot swappable. So, Unplugging and tracing cables might help in answering.

  Read the article

• Black screen after select installing on a Dell Inspiron 14z

  - by Rodrigo

  I'm trying to do a dual boot on my Dell Inspiron 14z notebook, but I always get a black screen after selecting Install Ubuntu. I've tried to add nomodeset and acpi_osi="Linux" to the boot options, but it doesn't change anything. The hardware: 3rd Generation Intel® Core™ i7-3517U processor (4M Cache, up to 3.0 GHz) 8GB2 Dual Channel DDR3 SDRAM at 1600MHz 500GB 5400 RPM SATA HDD and 32GB mSATA SSD AMD Radeon HD7570M 1GB This question isn't duplicated. I've already tested all tips in the following question! My computer boots to a black screen, what options do I have to fix it?

  Read the article

• How to completely shutdown Ati card

  - by Celso

  I would like to know how do i prevent my Ati card from turning on when i enter on ubuntu 11.10. My bios only lets-me shutdown intel hd card or leave the both on but i want to know if is possbible to completely shutdown without having to access to the bios.( if is possible to turn of without using Vgaswitcheroo even better!) My system is: Acer 3820tg-- intel core i3 350M, 2.26 Ghz L3, Ati Mobility Radeon HD 5470 up to 2138 MB hyper memory, 13,3" HD LED LCD, 4gb DDR3, SSD corsair 60GB sata 2. EDIT: I now know what is missing on the answers! I edited /etc/rc.local file and added the next lines: Sleep 3 echo ON /sys/kernel/debug/vgaswitcheroo/switch echo IGD /sys/kernel/debug/vgaswitcheroo/switch echo OFF /sys/kernel/debug/vgaswitcheroo/switch And then save the file and restart. It should be possible to use only the intel card now. By the way, i didn't blacklisted the radeon driver because doing it make my ati card wake up. (use it at your own risk. i only tested in my system)

  Read the article

• Ubuntu 12.04 boot freezes

  - by Lajos Soukup

  I installed win7 on one of my machines. It works without any problem. Now I can not install Ubuntu 12.04 (11.10, 11.04) because the installation process stops in a very early stage: I can see that ISOLinux was loaded, then I can see some very simple icons, then I can see text messages of the kernel. The last message I can see: [6.177983] sr 5:0:0:0: attached scsi general ss1 type 5 At that point the system stops. I tried different versions (11.04) , I disabled, and then disconnected the hdd, but the same problem occured independently from my actions. I can boot a gparted live cd, but that system can not see my hdd. On the other hand, I can boot the installation cd of the latest stable Debian distribution without any problem, but I would prefer to use Ubuntu, because I use that distribution on all of our machines.s Configuration: Asus P8H61-MLE motheboard, Gigabyte GTS 450, Intel i5, 4gb ram, wd 1T sata hdd Any idea? Best regards, Lajos

  Read the article

• How to convert an XFS file system to HFS+

  - by user219350

  I have repeatedly convinced of the reliability of the XFS file system , and I was more than satisfied . I was happy with everything in Ubuntu 14.04 ( great software) , but there is a little "but ! " Basically, I work on OSX-Mavericks 10.9.3, which sees very Windows 8.1 and works wonders with NTFS, but does not see Ubuntu! Briefly describe the equipment: ASRock B75 Pro3-M i5 3330 GeForce GTX 650 Ti SATA 500GB running OS X Mavericks + Clover - a boot disk Toshiba 2TB running Windows 8.1 (x64) and Ubuntu 14.04 (amd64) If you boot from the Toshiba (where there is Ubuntu and boot Windows + GRUB) after restart boot from Clover, it is impossible. Tried a lot of options - as Clover installation and boot priority, and various settings for GRUB, but have not found an acceptable option and have no desire to reinstall again Clover (Mavericks reboots 20 seconds - excellent!) So please help on the file system - how to convert from XFS to HFS+ journaled. Mavericks to saw it all synced on Mac. Thank you for the sensible answer and help! Originally in Russian.

  Read the article

• Big problem: Complete computer crash (no response when booted)

  - by Feratile

  I need your help: I installed Ubuntu 12.04 on my computer (I removed the complete system and installed Ubuntu instead) It said that the bootloader installation failed. So I chose the only partition that existed again. Installation succesful. Restart your computer. I did this. Then it went black when it rebooted (only a flickering stroke appears). No ISOs are executable. BIOS Boot Device Priority says: 1st Boot Device [SATA:PM-SAMSUNG HM] That was all I can say, please help me!

  Read the article

• Installing Ubuntu Server 11.04

  - by Jackson Walters

  Trying to install Ubuntu Server 11.04 on an 64-bit AMD machine. The install goes fine until after "Loading additional components", then I get a blank purple screen with a responsive cursor at the bottom. I've looked everywhere and can't find anything (all the documentation seems to be on the desktop version). I have a wireless card installed if that makes a difference, don't why it would. This happens regardless of whether nomodeset is set. Here's what it looks like (as described): Specs: CPU - 64-bit AMD Sempron 140 @ 2.7Ghz RAM - 1Gb DDR3 1333 HDD - WD 500Gb 7200RPM SATA 3.0Gb/s Mobo - Foxconn M61PMP-K Wireless Card - Rosewill RNX-G300LX

  Read the article

• Ubuntu doesn't find hdds with higher clock rates

  - by user136243

  I dual boot windows 7 64-bit and ubuntu 13.10 64-bit on separate disks, and utilize some overclocking from the BIOS. Windows works fine, however ubuntu can't seem to find any hard drives, except for at stock cpu speeds. While attempting to boot it says Gave up waiting for root device... and ALERT! /dev/sdb7 does not exist. Dropping to shell! A bootable usb stick still works, but gparted doesn't detect any other drives. Have tried: Boot-repair Changing SATA mode in BIOS Newer kernels Older ubuntu versions Not sure it's relevant, but the motherboard is a Gigabyte GA-A75M-UD2H with the newest BIOS version, the CPU an AMD Llano. This is hardly a fatal error, but it's inconvenient to change BIOS settings whenever I want to switch OS, and furthermore I'm quite curious about why it won't work. I'd appreciate any insight into what the actual problem is. So how can I resolve this issue ?

  Read the article

• 12.10 live dvd no video input

  - by mark kirby

  Hi I have been trying install Ubuntu 12.10, but as soon as it gets past my bios and to the screen with the blinking line in the top left, I get a no video input message on my tv (like when you turn the tv on with nothing connected). I have used live dvd's of both betas, alphas and daily build all with exactly the same results. Has any one else had this ? Is there a fix ? Dose this mean I can never upgrade my Ubuntu again ? (12.04 works ive been using since beta) My pc ,while old, should run this fine CPU = 2x Intel P4 HT @ 3ghz GPU = Nvidia Geforce 310 via HDMI RAM = 2 Gb DDR 2 HDD = 2 x 7200 rpm SATA Please help me I use Ubuntu exclusively on my pc and would like to keep doings so.

  Read the article

• How to setup Ubuntu as a backup server for my Windows computer?

  - by derek

  I took my old computer (AMD 5600+, 2GB RAM, 880gt, 250GB SATA, etc) and decided to jump and try Ubuntu for the first time. I have very very little knowledge (Red Hat when I was younger) with Linux in general. My main desktop is Windows 7 and my plan is to use the Ubuntu computer as a file server sort of speak. I want to be able to setup back up schedules from my Windows PC to the Ubuntu PC (plan on leaving this on 24/7 to double as a Seedbox) How do I go on to doing this?

  Read the article

< Previous Page | 160 161 162 163 164 165 166 167 168 169 170 171  | Next Page >