Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 165/170 | < Previous Page | 161 162 163 164 165 166 167 168 169 170  | Next Page >

• Can't get my Raspberry Pi to keep a static IP

  - by JonnyIrving

  I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

  Read the article

• Why doesn't video run smoothly on my laptop anymore?

  - by andygrunt

  This might be an impossible question to answer remotely but I figure there may be some common causes that people can suggest so I think it's worth asking... Video no longer plays smoothly on my laptop. It used to but not for a while now. For example, playing a video on YouTube is pretty typical: I press play (making sure it's not on HD or even HQ) and the video buffers a little then starts to play. At first it plays fine then the video starts to stutter, turning into a slideshow while the sound continues to play smoothly. If I try playing the same video on my Playstation 3 (which is linked to the same network) it plays smoothly so it can't be the connection. Another example is streaming DivX videos. Again, I wait while it buffers and it starts but very soon, instead of a slideshow, this time the video just plays slowly while the sound continues as normal (instantly getting out of sync). Even if I let the video fully load before pressing play (i.e. it's no longer streaming), it still behaves the same way. I can even let it load 100% then save the file to hard disk and use VLC player to view it, and the same thing happens. I'm using an old laptop running Windows XP. For the past several years it's been connected to the router via Wi-Fi but in the past few days I've changed that to a network cable (like my PS3) but that hasn't helped. Yes, I regularly install various bits and pieces of software but nothing that I can identify as being the cause. So, are there known causes of this sort of behaviour and if so, what can I do to fix it? Thanks. Update to answer a few questions... Laptop Spec' (note: video has played back fine for the majority of time I've had the laptop) Toshiba Satellite 1900-603 (possibly called something else outside the UK) Intel Pentium 4 2.2 Ghz Processor Originally had 512Mb memory but recently doubled that to 1 Gig of memory Graphics: ATI Mobility Radeon 16Mb DDR VRAM Windows XP SP3 (Home edition) Over the years I've done several things to speed it up (disabling indexing etc) and am generally happy with the performance. I also regularly have a clear out of old software (if for no other reason than the laptop only has a 40Gb hard disk) and use CCleaner and Glary Utilities to strip out much of the crap from my system. Also recently (after doubling the memory), I've tried a few new things which might be likely candidates for slowing the video down such as Rocketdock, Jingle keyboard (which gives an old style 'clacky' typewriter sound when I type - love it), SugarSync, Taskbar Shuffle. However, the video doesn't play smoothly even when I try quit all these apps.

  Read the article

• MySQL timeout only from office network to remote server, but other connections are fine

  - by Adam

  I've been developing these apps just fine on a local machine as has my co worker. We recently moved our work desks so we're now on a different floor of the building, but we only have one router that we're connected to. Since then, connecting to this one server appears to timeout more often than not. Occasionally I get through, and the loading is instantaneous. Anyhow we have these connections that were tested 1. my computer -> office network -> php pdo -> mysql server A - timeout 2. my computer -> office network -> mysql cli -> mysql server A - timeout 3. my computer -> office network -> mysql cli -> mysql server A - timeout 4. another pc -> office network -> mysql cli -> mysql server A - timeout 5. my computer -> mobile network -> mysql cli -> mysql server A - ok 6. my computer -> office network -> ssh server A -> mysql server A - ok 7. my computer -> office network -> ssh server B -> mysql server A - ok 8. server B web app -> php pdo -> mysql server A - ok 9. my computer -> office network -> php pdo -> mysql server B - ok 10. my computer -> office network -> mysql cli -> mysql server B - ok This has really stumped me.

  Read the article

• routing through multiple subinterfaces in debian

  - by Kstro21

  my question is as simple as the title, i have a debian 6 , 2 NICs, 3 different subnets in a single interface, just like this: auto eth0 iface eth0 inet static address 192.168.106.254 netmask 255.255.255.0 auto eth0:0 iface eth0:0 inet static address 172.19.221.81 netmask 255.255.255.248 auto eth0:1 iface eth0:1 inet static address 192.168.254.1 netmask 255.255.255.248 auto eth1 iface eth1 inet static address 172.19.216.3 netmask 255.255.255.0 gateway 172.19.216.13 eth0 is conected to a swith with 3 differents vlans, eth1 is conected to a router. No iptables DROP, so, all traffic is allowed. Now, passing the traffic through eth0 is OK, passing the traffic through eth0:0 is OK, but, passing the traffic through eth0:1 is not working, i can ping the ip address of that sub interface from a pc where this ip is the default gateway, but can't get to servers in the subnet of the eth1 interface, the traffic is not passing, even when i set the iptables to log all the traffic in the FORWARD chain and i can see the traffic there, but, the traffic is not really passing. And the funny is i can do any the other way around, i mean, passing from eth1 to eth0:1, RDP, telnet, ping, etc, doing some work with the iptable, i manage to pass some traffic from eth0:1 to eth1, the iptables look like this: iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m multiport --dports 25,110,5269 -j DNAT --to-destination 172.19.216.1 iptables -t nat PREROUTING -d 192.168.254.1/32 -p udp -m udp --dport 53 -j DNAT --to-destination 172.19.216.9 iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m tcp --dport 21 -j DNAT --to-destination 172.19.216.11 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 172.19.221.80/29 -j SNAT --to-source 172.19.221.81 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 192.168.254.0/29 -j SNAT --to-source 192.168.254.1 iptables -t nat POSTROUTING -s 172.19.216.0/24 -o eth0 -j SNAT --to-source 192.168.106.254 dong this is working, but,it is really a headache have to map each port with the server, imagine if i move the service from server, so, now i have doubts: can debian route through multiple subinterfaces?? exist a limit for this?? if not, what i'm doing wrong when i have the same setup with other subnets and it is working ok?? without the iptables rules in the nat, it doesn't work thanks and i hope good comments/answers

  Read the article

• dnsmasq local network works for some but hostnames are not resolving for others

  - by prggmr

  I have set up a local network and it seems that some of us can use it properly while others can't. The problem seems to be that the local hostnames I setup don't get resolved for everyone. To overview how the network is setup: I am running an Ubuntu 10.01 server using dnsmasq, this server is setup to act as our primary DNS server, configured via our router. dnsmasq is configured using the options of domain-needed bogus-priv I use the /etc/hosts file to determain the hostnames 192.168.1.10 ra.xsi 192.168.1.10 test.xsi From my machine: If I dig the hostnames they resolve properly ; <<>> DiG 9.4.3-P1 <<>> ra.xsi ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61671 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 9 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:28:34 2011 ;; MSG SIZE rcvd: 40 Ping also works: PING ra.xsi (192.168.1.10): 56 data bytes 64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=0.834 ms 64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=0.699 ms ^C --- ra.xsi ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.699/0.766/0.834/0.068 ms And login via SSH works using the hostname. For those that cannot connect using hostnames, if I dig from their machine it appears the name is being resolved, but they cannot ping, SSH or http access the hostname. ; <<>> DiG 9.6.0-APPLE-P2 <<>> ra ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12554 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 8 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:05:50 2011 ;; MSG SIZE rcvd: 36 I've been banging my head at this and just can't seem to figure it out.

  Read the article

• One user sometimes gets an unknown certificate error opening Outlook

  - by Chris

  Let me clarify a little. This isn't an unknown certificate error it's an unknown certificate error in so much as I can't figure out where the certificate comes from. This happens on a Win 7 Enterprise machine connecting to Exchange 2010 with Outlook 2010. The error he gets is that the root is not trusted because it's a self-signed cert. Take a look at this screenshot because even if I had generated this myself I wouldn't have put "SomeOrganizationalUnit" or "SomeCity" or "SomeState", etc. (Red block covers our domain name.) I'm a little concerned this is a symptom of a security breach. Exchange 2010 has three certificates installed but none of them are this certificate. They all have different expiration dates (one is expired) and different meta-data. edit: There are two scenarios that I see the certificate warning and one of them I can reliably repeat. When the user leaves his computer on over night Outlook pops the Security Warning window. I don't know what time this happens. Using Outlook Anywhere if I connect to Exchange externally via a cellular USB modem the Security Warning window will appear every time I close and reopen Outlook. Whether I say Yes or No does not make a difference on whether or not I can connect to Exchange and send/receive email. In other words, I can always connect to Exchange. I've checked my two Exchange servers and my Cisco router for a certificate that matches this one and I can't find it. edit 2: Here is a screenshot of the Security Alert window. (I've been calling it Security Warning... My mistake.) edit 3: I stopped seeing this error several weeks ago but I can't tie it to any single event (because I just sort of realized that warning had stopped showing up) but I think I found the source of the certificate. Last week I found out that the certificate on our website DomainA.com was invalid. I knew that our web admin had installed a valid certificate so when I look into the problem I found out I was being presented with the invalid certificate that this posting is in regards to. The Exchange server's domain is mail.DomainA.com so I can only guess that Outlook was passing this invalid certificate through as it did some kind of check on DomainA.com. This issue is still a mystery because the certificate warning stopped appearing several weeks ago whereas the invalid certificate issue on the website was only fixed last week. It ended up being a problem with the website control panel. The valid certificate was installed but not being served for some reason and instead the self-signed cert was being served.

  Read the article

• Problems with MGCP proxy creation

  - by Popof

  Hi, I'm trying to bypass my ISP router with my FreeBSD server (I've an optical connection so I've a RJ45 used to connect the box to WAN) Internet and TV are working fine (Using igmpproxy to forward TV stream) but I've a problem with phone. ISP's box is connected to the server which gives it a LAN address. The problem is that when the box builds MGCP packets (and especially SDP ones) it uses its LAN address. So I've think of writing an UDP proxy to handle MGCP and SDP packets in order to replace LAN address with server WAN address and then forward packet to WAN. Before starting coding I've captured stream packets using my server as a bridge between WAN connection and the ISP's box. And, in order to see if my solution is viable, I've tried to send those packets to the box using nemesis. I tried to send a packet (found in capture) containing an endpoint audit: AUEP 1447 aaln/[email protected] MGCP 1.0 F: A In the wireshark capture the box replied: 200 1447 OK A: a:PCMU;PCMA;G726-16;G726-24;G726-32;G726-40;G.723.1-5.3;G.723.1-6.3;G729;TELEPHONE-EVENT, fmtp:"TELEPHONE-EVENT 0-15,144,149,159", p:10-30, b:4-40, e:on, t:00, s:on, v:L;M;G;D, m:sendonly;recvonly;sendrecv;inactive;confrnce;replcate;netwtest;netwloop, dq-gi But when I use nemesis, I got an ICMP error: Port unreachable (Type 3, Code 3). To build this packet, WAN source address of the capture is replaced with my server LAN address, using the mgcp-callagent port (2727) and the packet is sent to the LAN address of the box at mgcp-gateway port (2427). The command I use is nemesis udp -S 192.168.2.1 -D 192.168.2.2 -x 2727 -y 2427 -P packet_to_send. I also tried an UDP scan to the box on callagent and gateway port: PORT STATE SERVICE 2727/udp open|filtered unknown 2427/udp closed unknown I found those results a little bit strange because it should be the 2427 port opened, as it was in capture. Internet Protocol, Src: <ISP MGCP Server>, Dst: <My WAN Address> User Datagram Protocol, Src Port: mgcp-callagent (2727), Dst Port: mgcp-gateway (2427) Does someone has any idea about how having my box responding to my requests ? Thanks in advance and sorry for my english.

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• Trying to get DNS services running on Windows Server 2008 R2, what am I getting wrong ?

  - by LaserBeak

  Ok, So I am basically trying to get a home server pc up that will provide Domain name services, act as Mail server and web server. I have one static IP, well it's not officially static but hasn't changed in two years so I'll call it static. I have done the following: Configured router NAT/virtual port forward UDP/TCP port 53 to the internal IP of my server 192.168.1.16, in adapter settings specified the manual settings: 192.168.1.16 IP, gateway 192.168.1.1, Subnet: 255.255.255.0 and loopback DNS: 127.0.0.1 Using my public my public IP Checked using http://www.canyouseeme.org/ that port 53 is open and is not being blocked by my ISP. It can see services on this port. Registered Domain name (mydomain.com.au) Updated whois database through the domain registrars site and registered NameServer names: ns0.mydomain.com.au and ns2.mydomain.com.au, both have been associated with my single public IP. (Waited 24 hours) Update the nameserver for mydomain.com.au: primary ns0.mydomain.com.au secondary: ns2.mydomain.com.au (waited 24+ hours) Installed Server 2008 R2, install web server role and DNS role. Webserver works when I enter my public IP into browser of any PC/mobile, get IIS7 welcome page. In DNS server: Created new forward lookup zone: ; ; Database file mydoman.com.au.dns for mydomain.com.au zone. ; Zone version: 10 ; @ IN SOA mydomain.com.au. mydomain.testdomain.com. ( 10 ; serial number 900 ; refresh 600 ; retry 86400 ; expire 3600 ) ; default TTL ; ; Zone NS records ; @ NS ns0.mydomain.com.au. @ NS ns1.mydomain.com.au. ; ; Zone records ; @ A 192.168.1.16 www A 192.168.1.16 The Domain name services will however not work, the whois database updated with ns0.mydomain.com.au etc. but when I type in my site name www.mydomain.com.au from an external machine it will not open site and I can't even ping it (Can't find host) When I check the ns0.mydomain.com.au NS record using a tool Like: http://www.squish.net/dnscheck/ I get: Security: Server ns0.mydomain.com.au (XXX.XXX.XXX.XX <- my public IP) is recursive Domain exists but there is no such record Any ideas, thanks...

  Read the article

• How secure is a subnet?

  - by HorusKol

  I have an unfortunate complication in my network - some users/computers are attached to a completely private and firewalled office network that we administer (10.n.n.x/24 intranet), but others are attached to a subnet provided by a third party (129.n.n.x/25) as they need to access the internet via the third party's proxy. I have previously set up a gateway/router to allow the 10.n.n.x/24 network internet access: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interface iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT However, I now need to enable access to users on our 129.n.n.x/25 subnet to some private servers on the 10.n.n.x/24 network. I figured that I could do something like: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.n.n.x/24) # eth2 = private interface #2 (129.n.n.x/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two public connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT My concern is that I know that the computers on our 129.n.n.x/25 subnet can be accessed via a VPN through the larger network operated by the provider - therefore, would it be possible for someone on the provider's supernet (correct term? inverse of subnet?) to be able to access our private 10.n.n.x/24 intranet?

  Read the article

• IT merger - self-sufficient site with domain controller VS thin clients outpost with access to termi

  - by imagodei

  SITUATION: A larger company acquires a smaller one. IT infrastructure has to be merged. There are no immediate plans to change the current size or role of the smaller company - the offices and production remain. It has a Win 2003 SBS domain server, Win 2000 file server, linux server for SVN and internal Wikipedia, 2 or 3 production machines, LTO backup solution. The servers are approx. 5 years old. Cisco network equippment (switches, wireless, ASA). Mail solution is a hosted Exchange. There are approx. 35 desktops and laptops in the company. IT infrastructure unification: There are 2 IT merging proposals. 1.) Replacing old servers, installing Win Server 2008 domain controller, and setting up either subdomain or domain trust to a larger company. File server and other servers remain local and synchronization should be set up to a centralized location in larger company. Similary with the backup - it remains local and if needed it should be replicated to a centralized location. Licensing is managed by smaller company. 2.) All servers are moved to a centralized location in larger company. As many desktop machines as possible are replaced by thin clients. The actual machines are virtualized and hosted by Terminal server at the same central location. Citrix solutions will be used. Only router and site-2-site VPN connection remain at the smaller company. Backup internet line to insure near 100% availability is needed. Licensing is mainly managed by larger company. Only specialized software for PCs that will not be virtualized is managed by smaller company. I'd like to ask you to discuss both solutions a bit. In your opinion, which is better from the operational point of view? Which is more reliable, cheaper in the long run? Easier to manage from the system administrator's point of view? Easier on the budget and easier to maintain from IT department's point of view? Does anybody have any experience with the second option and how does it perform in production environment? Pros and cons of both? Your input will be of great significance to me. Thank you very much!

  Read the article

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Two DHCP Servers, Block Clients for one of them?

  - by Rilindo

  I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

  Read the article

• Mysterious visitor to hidden PHP page

  - by B. VB.

  On my website, I have a "hidden" page that displays a list of the most recent visitors. There exist no links at all to this single PHP page, and, theoretically, only I know of its existence. I check it many times per day to see what new hits I have. However, about once a week, I get a hit from a 208.80.194.* address on this supposedly hidden page (it records hits to itself). The strange thing is this: this mysterious person/bot does not visit any other page on my site. Not the public PHP pages, but only this hidden page that prints the visitors. It's always a single hit, and the HTTP_REFERER is blank. The other data is always some variation of Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; FunWebProducts; .NET CLR 1.1.4322; SpamBlockerUtility 4.8.4; yplus 5.1.04b) ... but sometimes MSIE 6.0 instead of 7, and various other plug ins. The browser is different every time, as with the lowest-order bits of the address. And it's just that. One hit per week or so, to that one page. Absolutely no other pages are touched by this mysterious vistor. Doing a whois on that IP address showed it's from the new york area, and from the "Websense" ISP. The lowest order 8 bits of their address are always different, but always from 208.80.194.*/8. From most of the computers that I access my website, doing a tracerout to my server does not contain a router anywhere along the way with the IP 208.80.*. So that rules out any kind of HTTP sniffing, I might think. I have NO idea how, why this is happening. Does anyone have any clue, or have seen something as strange as this before? It seems completely benign, but unexplainable and a little creepy. Thanks in advance!

  Read the article

• Remote access to internal machine (ssh port-forwarding)

  - by MacUsers

  I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

  Read the article

• Mac OSX 10.8 Server DNS Domain Routing

  - by Oldek

  I just cant seem to figure out the logic in how to configure my Mac Server. So I have set up an DNS, which will take the domain and all subdomains and point towards an IP. File: db.mydomain.com (in /var/named/) mydomain.com. 10800 IN SOA mydomain.com. admin.mydomain.com. ( 2012110903 ; serial 3600 ; refresh (1 hour) 900 ; retry (15 minutes) 1209600 ; expire (2 weeks) 86400 ; minimum (1 day) ) 10800 IN NS mydomain.com. 10800 IN A 10.0.1.2 www.mydomain.com. 10800 IN A 10.0.1.2 So I want all of these requests to be requested to the 10.0.1.2 server, as I run 2 servers in my cluster. This one has always handled the requests, and now I want to add a server in between. So the server in between will get all the signals from my router which NAT the trafic coming from outside. So after setting this up and trying to point my port 80 towards my new server which will be the middle point, it doesn't work. Is it even possible to do it this way? First server: Mac Second server: Linux So what I try to achieve once more: 1. User goes to mydomain.com or www.mydomain.com 2. User request gets handled by my first server 3. First server refers to a local server, which is only available locally (it is configured to allow requests on port 80 and handle them) 4. Second server receives signal 5. Second server returns a request (either directly send to user or send through first server, whichever is most secure and configurable) I also want to be able to set up domains that lead to other servers in the future, and some that are only available within the VPN. (If that changes anything) I hope some kind soul could help me with this, it is really cumbersome for my mind to get the logic here. Do I have to configure my other server in any way? /Marcus

  Read the article

• Python cannot go over internet network

  - by user1642826

  I am currently trying to work with python networking and I have reached a bit of a road block. I am not able to network with any computer but localhost, which is kind-of useless with what networking is concerned. I have tried on my local network, from one computer to another, and I have tried over the internet, both fail. The only time I can make it work is if (when running on the server's computer) it's ip is set as 'localhost' or '192.168.2.129' (computers ip). I have spent hours going over opening ports with my isp and have gotten nowhere, so I decided to try this forum. I have my windows firewall down and I have included some pictures of important screen shots. I have no idea what the problem is and this has spanned almost a year of calls to my isp. The computer, modem, and router have all been replaced in that time. Screen shots: import socket import threading import socketserver class ThreadedTCPRequestHandler(socketserver.BaseRequestHandler): def handle(self): data = self.request.recv(1024) cur_thread = threading.current_thread() response = "{}: {}".format(cur_thread.name, data) self.request.sendall(b'worked') class ThreadedTCPServer(socketserver.ThreadingMixIn, socketserver.TCPServer): pass def client(ip, port, message): sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.connect((ip, port)) try: sock.sendall(message) response = sock.recv(1024) print("Received: {}".format(response)) finally: sock.close() if __name__ == "__main__": # Port 0 means to select an arbitrary unused port HOST, PORT = "192.168.2.129", 9000 server = ThreadedTCPServer((HOST, PORT), ThreadedTCPRequestHandler) ip, port = server.server_address # Start a thread with the server -- that thread will then start one # more thread for each request server_thread = threading.Thread(target=server.serve_forever) # Exit the server thread when the main thread terminates server_thread.daemon = True server_thread.start() print("Server loop running in thread:", server_thread.name) ip = '12.34.56.789' print(ip, port) client(ip, port, b'Hello World 1') client(ip, port, b'Hello World 2') client(ip, port, b'Hello World 3') server.shutdown() I do not know where the error is occurring. I get this error: Traceback (most recent call last): File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 43, in <module> client(ip, port, b'Hello World 1') File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 18, in client sock.connect((ip, port)) socket.error: [Errno 10061] No connection could be made because the target machine actively refused it Any help will be greatly appreciated. *if this isn't a proper forum for this, could someone direct me to a more appropriate one.

  Read the article

• Asterisk server firewall script allows 2-way audio from incoming calls, but not on outgoing?

  - by cappie

  I'm running an Asterisk PBX on a virtual machine directly connected to the Internet and I really want to prevent script kiddies, l33t h4x0rz and actual hackers access to my server. The basic way I protect my calling-bill now is by using 32 character passwords, but I would much rather have a way to protect The firewall script I'm currently using is stated below, however, without the established connection firewall rule (mentioned rule #1), I cannot receive incoming audio from the target during outgoing calls: #!/bin/bash # first, clean up! iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD DROP # we're not a router iptables -P OUTPUT ACCEPT # don't allow invalid connections iptables -A INPUT -m state --state INVALID -j DROP # always allow connections that are already set up (MENTIONED RULE #1) iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # always accept ICMP iptables -A INPUT -p icmp -j ACCEPT # always accept traffic on these ports #iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT # always allow DNS traffic iptables -A INPUT -p udp --sport 53 -j ACCEPT iptables -A OUTPUT -p udp --dport 53 -j ACCEPT # allow return traffic to the PBX iptables -A INPUT -p udp -m udp --dport 50000:65536 -j ACCEPT iptables -A INPUT -p udp -m udp --dport 10000:20000 -j ACCEPT iptables -A INPUT -p udp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -p tcp --destination-port 5060:5061 -j ACCEPT iptables -A INPUT -m multiport -p udp --dports 10000:20000 iptables -A INPUT -m multiport -p tcp --dports 10000:20000 # IP addresses of the office iptables -A INPUT -s 95.XXX.XXX.XXX/32 -j ACCEPT # accept everything from the trunk IP's iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT iptables -A INPUT -s 195.XXX.XXX.XXX/32 -j ACCEPT # accept everything on localhost iptables -A INPUT -i lo -j ACCEPT # accept all outgoing traffic iptables -A OUTPUT -j ACCEPT # DROP everything else #iptables -A INPUT -j DROP I would like to know what firewall rule I'm missing for this all to work.. There is so little documentation on which ports (incoming and outgoing) asterisk actually needs.. (return ports included). Are there any firewall/iptables specialists here that see major problems with this firewall script? It's so frustrating not being able to find a simple firewall solution that enabled me to have a PBX running somewhere on the Internet which is firewalled in such a way that it can ONLY allows connections from and to the office, the DNS servers and the trunk(s) (and only support SSH (port 22) and ICMP traffic for the outside world). Hopefully, using this question, we can solve this problem once and for all.

  Read the article

• No external network on ubuntu 9.10, though dns works..

  - by user29368

  Hi, I have a weird problem I cant solve. I have several computers, two with xubuntu 9.10 One of them, acting as a media server, has stopped to work when it comes to external network.. I can do for example: ping google.com Which gives me an ip adress back, like: name@Media:/etc$ ping google.com PING google.com (66.102.9.147) 56(84) bytes of data. That tells me it reaches the dns?, but I get no response at all... If I ping a local computer all works fine. I can also reach the computer via ssh without any problems. I have always used network manager, but now I uninstalled it and made the settings manually like this: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.52 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 Still no luck. I have no specific settings for this one in my router, and all the other computers, including my win laptop works fine. This is very annoying since I cant even do an update or anything.. ifconfig looks like this: eth0 Link encap:Ethernet HWaddr 00:24:1d:9f:10:89 inet addr:192.168.1.52 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::224:1dff:fe9f:1089/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15410 errors:0 dropped:0 overruns:0 frame:0 TX packets:2693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1167398 (1.1 MB) TX bytes:694973 (694.9 KB) Interrupt:27 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2150 errors:0 dropped:0 overruns:0 frame:0 TX packets:2150 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:143456 (143.4 KB) TX bytes:143456 (143.4 KB) route -n like this Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 I do not know where the adress starting with 169.254 comes from.. Could that be a part of the problem? Hoping for some assistance since Im totally stuck here.. /george

  Read the article

• How to troubleshoot port forwarding on Windows 7 (64 Bit) with ICS enabled?

  - by LearnCocos2D

  I want to forward some ports (1666 for perforce, 8081 for Hudson) on my Internet Gateway machine. This machine is running Windows 7 (64 Bit, legal, user-account) and connected to the Internet via cable modem (it's not a router). The Windows machine is sharing its Internet Connection via ICS and that works fine on all connected computers. I can access the services via the gateway's public IP (95.x.x.x) on the given ports if they are running on the gateway machine itself. I've added the ports and destination IP address (192.168.0.18) in the Internet network adapter's Advanced Settings dialog (Sharing tab). That's the same dialog where you have a list of preconfigured services like HTTP, FTP and other incoming services. When I do that I can't connect to the services anymore. For some reason port forwarding isn't working. I have uninstalled Bitdefender because I wanted to check if the Firewall interferes. I've also disabled the Windows Firewall and Defender to no avail. I tried a freeware tool that helps to setup port forwarding but that didn't work either. The target machine is a Mac OS X computer whose Firewall is disabled. The IP is static. I can successfully connect to the services using the local IP address (192.168.0.18) from two different machines, including the gateway computer. So internally and externally it seems to me that the ports are open and not blocked, and the issue is with port forwarding itself. From what I understand it should be enough to add an entry to the Advanced Settings dialog to enable port forwarding when there are no firewalls interfering. How can I troubleshoot why port forwarding isn't working for me? What steps should I follow to alleviate the issue? PS: I gladly accept command line solutions. Other things I've tried: adding an Inbound Rule to Windows Firewall for the 1666, 8081 ports trying with Windows Firewall enabled and disabled disabling/enabling the network adapter double-checked that the IP addresses are correct mapping a different incoming port to the service's actual port followed or checked the misc tips in this article What I haven't dared trying yet (let me know if it's worth a shot): disable/enable ICS remove all network adapters (via Control Panel), then re-install and re-configure them

  Read the article

• Internet Pings but Does Not Load

  - by t3techcom18

  From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

  Read the article

• CodePlex Daily Summary for Sunday, March 07, 2010

  CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

  Read the article

• Stand-Up Desk 2012 Update

  - by BuckWoody

  One of the more popular topics here on my technical blog doesn't have to do with technology, per-se - it's about the choice I made to go to a stand-up desk work environment. If you're interested in the history of those, check here: Stand-Up Desk Part One Stand-Up Desk Part Two I have made some changes and I was asked to post those here.Yes, I'm still standing - I think the experiment has worked well, so I'm continuing to work this way. I've become so used to it that I notice when I sit for a long time. If I'm flying, or driving a long way, or have long meetings, I take breaks to stand up and move around. That being said, I don't stand as much as I did. I started out by standing the entire day - which did not end well. As you can read in my second post, I found that sitting down for a few minutes each hour worked out much better. And over time I would say that I now stand about 70-80% of the day, depending on the day. Some days I don't even notice I'm standing, so I don't sit as often. Other days I find that I really tire quickly - so I sit more often. But in both cases, I stand more than I sit. In the first post you can read about how I used a simple coffee-table from Ikea to elevate my desktop to the right height. I then adjusted the height where I stand by using a small plastic square and some carpet. Over time I found this did not work as well as I'd like. The primary reason is that the front of these are at the same depth - so my knees would hit the desk or table when I sat down. Also, the desk was at a certain height, and I had to adjust, rather than the other way around.  Also, I like a lot of surface area on top of a desk - almost more of a table. Routing cables and wiring was a pain, and of course moving it was out of the question.   So I've changed what I use. I found a perfect solution for what I was looking for - industrial wire shelving: I bought one, built only half of it (for the right height I wanted) and arranged the shelves the way I wanted. I then got a 5'x4' piece of wood from Lowes, and mounted it to where the top was balanced, but had an over-hang  I could get my knees under easily.My wife sewed a piece of fake-leather for the top. This arrangement provides the following benefits: Very strong Rolls easily, wheels can lock to prevent rolling Long, wide shelves Wire-frame allows me to route any kind of wiring and other things all over the desk I plugged in my UPS and ran it's longer power-cable to the wall outlet. I then ran the router's LAN connection along that wire, and covered both with a large insulation sleeve. I then plugged in everything to the UPS, and routed all the wiring. I can now roll the desk almost anywhere in the room so that I can record, look out the window, get closer to or farther away from the door and more. I put a few boxes on the shelves as "drawers" and tidied that part up. Even my printer fits on a shelf. Laser-dog not included - some assembly required In the second post you can read about the bar-stool I purchased from Target for the desk. I cheaped-out on this one, and it proved to be a bad choice. Because I had to raise it so high, and was constantly sitting on it and then standing up, the gas-cylinder in it just gave out. So it became a very short stool that I ended up getting rid of. In the end, this one from Ikea proved to be a better choice: And so this arrangement is working out perfectly. I'm finding myself VERY productive this way. I hope these posts help you if you decide to try working at a stand-up desk. Although I was skeptical at first, I've found it to be a very healthy, easy way to code, design and especially present over a web-cam. It's natural to stand to speak when you're presenting, and it feels more energetic than sitting down to talk to others.

  Read the article

• How to Play PC Games on Your TV

  - by Chris Hoffman

  No need to wait for Valve’s Steam Machines — connect your Windows gaming PC to your TV and use powerful PC graphics in the living room today. It’s easy — you don’t need any unusual hardware or special software. This is ideal if you’re already a PC gamer who wants to play your games on a larger screen. It’s also convenient if you want to play multiplayer PC games with controllers in your living rom. HDMI Cables and Controllers You’ll need an HDMI cable to connect your PC to your television. This requires a TV with HDMI-in, a PC with HDMI-out, and an HDMI cable. Modern TVs and PCs have had HDMI built in for years, so you should already be good to go. If you don’t have a spare HDMI cable lying around, you may have to buy one or repurpose one of your existing HDMI cables. Just don’t buy the expensive HDMI cables — even a cheap HDMI cable will work just as well as a more expensive one. Plug one end of the HDMI cable into the HDMI-out port on your PC and one end into the HDMI-In port on your TV. Switch your TV’s input to the appropriate HDMI port and you’ll see your PC’s desktop appear on your TV.  Your TV becomes just another external monitor. If you have your TV and PC far away from each other in different rooms, this won’t work. If you have a reasonably powerful laptop, you can just plug that into your TV — or you can unplug your desktop PC and hook it up next to your TV. Now you’ll just need an input device. You probably don’t want to sit directly in front of your TV with a wired keyboard and mouse! A wireless keyboard and wireless mouse can be convenient and may be ideal for some games. However, you’ll probably want a game controller like console players use. Better yet, get multiple game controllers so you can play local-multiplayer PC games with other people. The Xbox 360 controller is the ideal controller for PC gaming. Windows supports these controllers natively, and many PC games are designed specifically for these controllers. Note that Xbox One controllers aren’t yet supported on Windows because Microsoft hasn’t released drivers for them. Yes, you could use a third-party controller or go through the process of pairing a PlayStation controller with your PC using unofficial tools, but it’s better to get an Xbox 360 controller. Just plug one or more Xbox controllers into your PC’s USB ports and they’ll work without any setup required. While many PC games to support controllers, bear in mind that some games require a keyboard and mouse. A TV-Optimized Interface Use Steam’s Big Picture interface to more easily browse and launch games. This interface was designed for using on a television with controllers and even has an integrated web browser you can use with your controller. It will be used on the Valve’s Steam Machine consoles as the default TV interface. You can use a mouse with it too, of course. There’s also nothing stopping you from just using your Windows desktop with a mouse and keyboard — aside from how inconvenient it will be. To launch Big Picture Mode, open Steam and click the Big Picture button at the top-right corner of your screen. You can also press the glowing Xbox logo button in the middle of an Xbox 360 Controller to launch the Big Picture interface if Steam is open. Another Option: In-Home Streaming If you want to leave your PC in one room of your home and play PC games on a TV in a different room, you can consider using local streaming to stream games over your home network from your gaming PC to your television. Bear in mind that the game won’t be as smooth and responsive as it would if you were sitting in front of your PC. You’ll also need a modern router with fast wireless network speeds to keep up with the game streaming. Steam’s built-in In-Home Streaming feature is now available to everyone. You could plug a laptop with less-powerful graphics hardware into your TV and use it to stream games from your powerful desktop gaming rig. You could also use an older desktop PC you have lying around. To stream a game, log into Steam on your gaming PC and log into Steam with the same account on another computer on your home network. You’ll be able to view the library of installed games on your other PC and start streaming them. NVIDIA also has their own GameStream solution that allows you to stream games from a PC with powerful NVIDIA graphics hardware. However, you’ll need an NVIDIA Shield handheld gaming console to do this. At the moment, NVIDIA’s game streaming solution can only stream to the NVIDIA Shield. However, the NVIDIA Shield device can be connected to your TV so you can play that streaming game on your TV. Valve’s Steam Machines are supposed to bring PC gaming to the living room and they’ll do it using HDMI cables, a custom Steam controller, the Big Picture interface, and in-home streaming for compatibility with Windows games. You can do all of this yourself today — you’ll just need an Xbox 360 controller instead of the not-yet-released Steam controller. Image Credit: Marco Arment on Flickr, William Hook on Flickr, Lewis Dowling on Flickr

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170  | Next Page >