Search Results

Search found 7455 results on 299 pages for 'power cable'.

Page 165/299 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• Question about Remote WAN IP on NetGear FVS336G VPN setup

  - by camilian

  I wanted to be able to have a VPN connection to my home network so I purchased the FVS336G because the reviews said it was easy set up. I am sure it is for someone that knows what needs to be entered it is easy, but I am a little confused. Using the VPN wizard I choose VPN Client as the tunnel connection, enter key, etc... but then I get to the "What is the remote WAN's IP or Internet Name" and "What is the local WAN's IP address or Internet Name" I am lost. I am probably being really dumb, but I am not sure what I need to put in here. Is the remote WAN ip the ip from the outside world to my cable modem? Is the local ip the ip to my FVS336G? Any help would be appreciated.

  Read the article

• Is this a common/bug on this PPPoE setting for Cisco ASA 5505?

  - by DCAlliances

  We have to change the way the firewall setup due to we've changed the internet provider. The way we setup we have ADSL modem and we have to do a full bridge mode and the firewall configuration has to change from Static IP to Use PPPoE option on Outside interface with PPPoE username and password, CHAP authentication, WAN IP and WAN subnet mask. [See the attachment] It's been working ok with the use of PPPoE option however the issue is that if we un-plug the power cable of the firewall. This "Outside" interface turned to blank - NO WAN IP, PPPoE username and password. So basically, we have to retype this information again. Is this common or a bug? Any ideas? Thanks

  Read the article

• How can I get data off of a Corsair SSD?

  - by user1870398

  My Corsair SSD won't work and I have some critical data on it that I didn't back up (I needed to create a copy of my mechanical storage device, just forgot). The drive isn't detected by the OS or BIOS. I also tried it on another system, but all that happened was the OS failed to load (my guess was that it knew the drive was there, just couldn't read it). I tried powering it on without the data cable for a bit of time to see if it'd work again, but it didn't. Any ideas of how I can get the data off of this drive without having to send it in?

  Read the article

• Migrating RAID6 array from HP SmartArray P600 to LSI MegaRAID SAS 8888ELP

  - by MLu

  My customer has an external RAID6 array (8x 1TB in HP MSA60 enclosure) attached to HP SmartArray P600 controller. They have now decided to replace the server and the new one comes with LSI MegaRAID SAS 8888ELP. The HW supplier insists the migration is as simple as pulling the eSATA cable from P600 and inserting it into LSI but I'm not convinced. Unfortunately I have nowhere to test, and will have to do the exercise on the production array :( So the question in brief - is it possible to import the HP SmartArray P600-created RAID6 array to LSI MegaRAID 8888ELP?

  Read the article

• Why only the left speakers are working?

  - by user324469

  I've just bought a 5.1 speakers and only the left side speakers and the center are working. If I plug in the speakers to my mp3 player than each speaker is working, so the speakers are good. I have windows 7 and I can't configure it. Please help me! I'm sure that the problem is with some settings at the computer. A while ago I had the same issue with some stereo speakers and I can't remember how I've fixed it, but it was only a setting error. I don`t think that my sound card could be the problem, because it's in-built and I have a new motherboard: asus m2n68-am. I've just tested my computer with some stereo head speakers and also only the left one was working. If I start the speakers very loud than the right speakers are making some noise, too I've connected the speakers with a two channels cable. This is the speakers type: genius sw-hf 5.1 5050 v2

  Read the article

• Windows 7 randomly installs an "Unknown Device" successfully

  - by Amazed

  Rarely (several days to weeks between occurrences,) and seemingly at random, I get a balloon notification from Windows 7 (x64 SP1 Home Premium) that it is installing hardware for me. Whatever is being installed does so without error. However, no new hardware has been installed or plugged in! When I click the balloon it doesn't give me any useful information: Looking in the event log, I find this entry: Event ID: 20001 Source: UserPnp Task Category: 7005 Message: Driver Management concluded the process to install driver FileRepository\usb.inf_amd64_neutral_153b489118ee37b8\usb.inf for Device Instance ID USB\VID_0000&PID_0000\6&3AF9A177&0&0060&&02 with the following status: 0x0. It appears to be USB related. My motherboard has both USB 2.0 and 3.0 controllers. My keyboard and mouse are plugged into the 2.0 slots and the data/recharge cable for a tablet (but not the tablet itself) was plugged in to the 3.0 slot. No other USB devices have been attached for several days/reboots. Why is Windows doing this?

  Read the article

• Linksys WRT54G2 not showing connected PC's in DHCP table

  - by Moose

  For some reason all of a sudden my linksys WRT54G2 no longer shows PC's connected in the DHCP table. It was being touchy then all of a sudden they all just disappeared. It showed 2 of the 4 connected then it showed the other 2 then it only showed 1 and then it was showing none. I seem to be having a connection reset every 30-60 minutes also not sure if that is related to the router going bad or if it is just comcast being it's typical crappy self. I have tried to reset my router and my cable modem and both problems still seem to keep happening(no PC's in table and connection reset every 30-60 mins). Now I know the router doesn't store clients after a router reboot but they normally show up within a matter of minutes for me in the past. Before anyone asks yes all devices on the network are using DHCP and not static. Could this be a sign of the router starting to go bad?

  Read the article

• Should I remove all unmanged switches from my network?

  - by IMAbev

  I have a office network with approx 150 devices (computers/printers/ip phones). Almost all of the end point devices have straight run Cat5e from my Hp switches directly to the device. IP phones for each end user sit between the hp switch and computer. (hp switch - in to phone out of phone in to computer) While I have gotten rid of most of them, I still have a couple linksys unmanaged switches that split off to 2 or more devices. I have heard various reasons for removing these switches but not entirely sure if it actually degrades the network. I agree that eliminating these switches certainly cleans up the network from a management standpoint. Are these unmanaged switches bad for my network? Is there a clear advantage to having 'home run' cable runs to each of my end point devices?

  Read the article

• Recommendations for distributed processing/distributed storage systems

  - by Eddie

  At my organization we have a processing and storage system spread across two dozen linux machines that handles over a petabyte of data. The system right now is very ad-hoc; processing automation and data management is handled by a collection of large perl programs on independent machines. I am looking at distributed processing and storage systems to make it easier to maintain, evenly distribute load and data with replication, and grow in disk space and compute power. The system needs to be able to handle millions of files, varying in size between 50 megabytes to 50 gigabytes. Once created, the files will not be appended to, only replaced completely if need be. The files need to be accessible via HTTP for customer download. Right now, processing is automated by perl scripts (that I have complete control over) which call a series of other programs (that I don't have control over because they are closed source) that essentially transforms one data set into another. No data mining happening here. Here is a quick list of things I am looking for: Reliability: These data must be accessible over HTTP about 99% of the time so I need something that does data replication across the cluster. Scalability: I want to be able to add more processing power and storage easily and rebalance the data on across the cluster. Distributed processing: Easy and automatic job scheduling and load balancing that fits with processing workflow I briefly described above. Data location awareness: Not strictly required but desirable. Since data and processing will be on the same set of nodes I would like the job scheduler to schedule jobs on or close to the node that the data is actually on to cut down on network traffic. Here is what I've looked at so far: Storage Management: GlusterFS: Looks really nice and easy to use but doesn't seem to have a way to figure out what node(s) a file actually resides on to supply as a hint to the job scheduler. GPFS: Seems like the gold standard of clustered filesystems. Meets most of my requirements except, like glusterfs, data location awareness. Ceph: Seems way to immature right now. Distributed processing: Sun Grid Engine: I have a lot of experience with this and it's relatively easy to use (once it is configured properly that is). But Oracle got its icy grip around it and it no longer seems very desirable. Both: Hadoop/HDFS: At first glance it looked like hadoop was perfect for my situation. Distributed storage and job scheduling and it was the only thing I found that would give me the data location awareness that I wanted. But I don't like the namename being a single point of failure. Also, I'm not really sure if the MapReduce paradigm fits the type of processing workflow that I have. It seems like you need to write all your software specifically for MapReduce instead of just using Hadoop as a generic job scheduler. OpenStack: I've done some reading on this but I'm having trouble deciding if it fits well with my problem or not. Does anyone have opinions or recommendations for technologies that would fit my problem well? Any suggestions or advise would be greatly appreciated. Thanks!

  Read the article

• Change audio output depending on which one is on

  - by pkrish

  I have a PC that is hooked up to my HDTV (via a long hdmi cable) and to a monitor, which is in another room. I have speakers directly plugged to the PC audio out. The PC is next to the monitor and speakers. I am not sure but I think Windows can play sound on only 1 audio device at a time. And I can only set 1 device as the default output. I can get sound on the TV or speaker depending on which device I set to default. But I would have to do this every time I switch between using my TV or my monitor! Is there some way to configure such that sound plays through the TV if the TV is on, else it plays in the speakers? If this is not possible, then the next best alternative would be to get the sound to play on both the devices at the same time. Thanks!

  Read the article

• MySQL replication hung after slave goes offline and comes back online again

  - by Ed Manet

  I have a master server and several slave servers replicating a single database. I am using in MySQL 5.0 in SLES 11. During fault tolerance testing I found that when the slave's network connection is broken (cable un-plugged) and then restored, replication hangs. It shows no errors and the slave appears to be running but the Read_Master_Log_Pos and Exec_Master_Log_Pos values do not match the log postion on the master server. The Slave_IO_State is "Waiting for master to send event". The Slave_IO_Running and Slave_SQL_Running values are both are "Yes". The Master_Log_File and Relay_Master_Log_File match. If I stop and start the slave or restart the mysql daemon, replication starts working again. Any ideas on what I can do about this?

  Read the article

• Routing internet through ethernet to a computer without a Wireless adapter

  - by Decency

  I'm setting up a small home network. I have a laptop which connects to internet wirelessly- that works fine. I have a desktop connected to this laptop by an ethernet cable which I'd like to access the internet with. In the past, I have used a different laptop to do this and had no problems doing so. Both computers run Windows 7. I have tried setting up a homegroup and disabling Windows firewall, as well as restarting both computers. I can share data but my internet connection can not be accessed through the desktop. (I understand USB network adapters are cheap, I have one on the way but that doesn't solve this issue.) Any help or live chat support if you'd prefer would be appreciated. Thanks!

  Read the article

• Realtek HD Audio 5.1 Optical Input (from Xbox 360)

  - by Shevek

  I'm trying to connect up my Xbox 360 digital audio to my 5.1 speakers via my PC (my LCD has dual input, DVI for the PC, D-SUB for the Xbox). The motherboard has a Realtek ALC888 chipset and I have a 5.1 speaker system connected via 3 x 3.5mm jacks (FR/FL, RR/RL, C/LFE) and I get full 5.1 output from the PC. I have connected the optical audio cable from the Xbox to the Optical In on the motherboard's backplate. With the Xbox in Digital Stereo mode I get 2 channel audio from the Xbox, through the PC, to the speakers. With the Xbox in Dolby Digital 5.1 mode I get no sound at all. I have the latest Realtek drivers installed in Win 7 32-bit. Questions: Is it possible to use the full 5.1 DD from the Xbox? If so, am I missing some option(s) in the Realtek setup? Do I need some other piece of software to do this? (AC3Filter or FFDShow perhaps) Many thanks

  Read the article

• Stunnel delaying boot

  - by Onitlikesonic

  My stunnel implementation works fine when the network is plugged in but it takes an awful amount of time, which delays the whole boot process, when there is no network connected to the machine. As extra information: I'm using "delay=yes" I'm using an fqdn (e.g: stunnel.mydomain.com) for the connections Using ubuntu but this also happened with centos5 previously How can this be avoided or a timeout specified? edit: doing an strace as suggested by symcbean shows the following (including the last part where it hangs): [...] --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 0 close(3) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6039 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7ff9ce0c79d0) = 6046 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046 --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 6046 write(1, "[Started: /etc/stunnel/stunnel.c"..., 37) = 37 write(1, "stunnel.\n", 9) = 9 exit_group(0) = ? [...] stunnel hangs in this line: wait4(-1, and when i plug in the network cable it continues to show [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046

  Read the article

• How can I switch between the HDMI and DVI outputs of my graphics card?

  - by Owen Melbourne

  I've got an Nvidia GTX 560ti card which currently I've got my 2 monitors hooked up to using the 2 DVI ports. However its got a mini-HDMI port which I've plugged a HDMI cable in (with mini adapter) and lead it into my TV which is across the room. I'm hoping to be able to toggle between the HDMI output and the DVI outputs, however I'm not sure how I'd go about this, Could somebody please point me in the right direction, I'm not really worried about having all 3 on at the same time so that isn't a problem, but if its possible then I'll do that.

  Read the article

• How share internet connection between two laptops

  - by danielgratzz

  I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

  Read the article

• RDMA architecture - do you need adapters on both ends?

  - by Bobb

  I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

  Read the article

• A faulty Caviar Blue hard drive?

  - by Glister

  We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

  Read the article

• How do I maximize and check my gigabit transfer rate?

  - by J Penguin

  I'm trying to maximize my LAN transfer speed. LAN cards and switch are all gigabit on a CAT 6 cable. Modes are set correctly to 1000 full duplex. CentOS server Testing with ftp from both windows and fedora, I'm only having the speed around 11MB/s. On windows I notice that the first few seconds of file transfer I'm actually getting around 25MB/s before it drops to 11MB/s Can anyone please recommend me what my next step should be to increase this performance? Are there any utilities I can use to test the file transfer speed without taking hard drive speed into consideration? The only thing I know is the MTU which I will have to wait until the office hour is over before I can play with it. If there are anything else I should be aware of, please please let me know. Thank you!

  Read the article

• How do I increase my home's bandwidth?

  - by Derek

  I just mistakingly posted this on Stack Exchange but don't know how to delete it... Anyway, I was thinking of building a home server to use instead of renting a VPS, because in the long run it would be cheaper. What I'm concerned with is the bandwidth limit of my house. I know when I'm downloading something off the internet, if I download at high speeds the rest of the computers connected to my router will become slower. Is there any way to avoid this? There are other cable outlets in my house, will connecting a modem and router there avoid this problem?

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• How do I set up failover for a single web server using two ISPs?

  - by Travis

  I have one web server and two WAN connections (1 cable, 1 DSL). DNS is run offsite, and points to the IP address assigned by one of the ISPs. How can I have the second connection take over when the primary one fails? I have seen that it is possible to have two A records, each pointing to a different IP, but it has several problems. What's the real solution to this? I imagine this is a very common issue. Thanks in advance!

  Read the article

• Bitlocker-to-go on fixed drive

  - by Unsigned

  Scenario Two drives are connected to a computer. One via a SATA-to-USB interface, the other directly via a SATA-to-eSATA cable. The drive on USB appears as a removable drive, the drive on eSATA appears as a fixed drive. Both use NTFS. The USB drive offers Bitlocker-To-Go, the eSATA drive only offers BitLocker. Question It is my understanding that drives encrypted with BitLocker-To-Go include an app to allow Windows XP read-only access to the volume. Is this the only difference, and is there a way to use Bitlocker-To-Go on the eSATA drive? Update Another difference is found here: The recovery key is required when a BitLocker-protected fixed data drive configured for automatic unlocking is moved to another computer.[1] Assuming that does not apply to removable drives.

  Read the article

• How to prevent Ubuntu from combining networks on 2 NIC server?

  - by SolarPower

  I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

  Read the article

• GRUB Problem or Hardware Problem?

  - by Nikit Batale

  I have Windows XP Professional and Ubuntu Karmic Koala 9.10 on dual boot. I often get a GRUB loading failed error during boot-up. Or sometimes, when I try to boot into either Ubuntu or XP, I get a Could not read from source error. Now this is funny. After getting one of the above errors, if I simply unplug the SATA cable from Hard Drive end and plug it again, the problem gets solved. So what and whose problem is it? GRUB or My Hardware ? P.S.: I was suggested on StackOverflow that ServerFault is the right place for this question.

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >