Search Results

Search found 22000 results on 880 pages for 'worker process'.

Page 165/880 | < Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >

• Error when Eclipse started and now my package explorer is empty!

  - by carpenteri

  Friends, Just a quick introduction, I'm currently learning Java, using a combination of the Head First Java book and Eclipse. Everything was going well until tonight! When I started up Eclipse tonight, I saw an error message which I didn't pay attention to (I know! I know!) and acknowledged after which the project explorer was empty where it used to contain my Head First project! After a quick "google" I found the workspace.metadata.log and the errors are shown below. The version of Eclipse I am using is: 20100218-1602 and the only plugin that I use is egit. Any help would be much appreciated. Thanks !SESSION 2010-06-08 19:24:33.841 ----------------------------------------------- eclipse.buildId=unknown java.version=1.5.0_22 java.vendor=Sun Microsystems Inc. BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_GB Framework arguments: -product org.eclipse.epp.package.java.product Command-line arguments: -os win32 -ws win32 -arch x86 -product org.eclipse.epp.package.java.product !ENTRY org.eclipse.ui.workbench 4 2 2010-06-08 19:24:36.475 !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.ui.workbench". !STACK 1 org.eclipse.ui.WorkbenchException: Content is not allowed in prolog. at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:121) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:64) at org.eclipse.ui.internal.Workbench$49.run(Workbench.java:1895) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1890) at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183) at org.eclipse.ui.application.WorkbenchAdvisor$1.run(WorkbenchAdvisor.java:781) Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:94) ... 6 more !SUBENTRY 1 org.eclipse.ui 4 0 2010-06-08 19:24:36.475 !MESSAGE Content is not allowed in prolog. !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:94) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:64) at org.eclipse.ui.internal.Workbench$49.run(Workbench.java:1895) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1890) at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183) at org.eclipse.ui.application.WorkbenchAdvisor$1.run(WorkbenchAdvisor.java:781) !SUBENTRY 1 org.eclipse.ui 4 0 2010-06-08 19:24:36.475 !MESSAGE Content is not allowed in prolog. !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:94) at org.eclipse.ui.XMLMemento.createReadRoot(XMLMemento.java:64) at org.eclipse.ui.internal.Workbench$49.run(Workbench.java:1895) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1890) at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183) at org.eclipse.ui.application.WorkbenchAdvisor$1.run(WorkbenchAdvisor.java:781) !ENTRY org.eclipse.jdt.ui 4 10001 2010-06-08 19:24:41.442 !MESSAGE Internal Error !STACK 1 org.eclipse.jdt.internal.ui.JavaUIException: Problems reading information from XML 'OpenTypeHistory.xml' at org.eclipse.jdt.internal.corext.util.History.createException(History.java:70) at org.eclipse.jdt.internal.corext.util.History.load(History.java:257) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.<init>(OpenTypeHistory.java:199) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.getInstance(OpenTypeHistory.java:185) at org.eclipse.jdt.internal.ui.JavaPlugin.initializeAfterLoad(JavaPlugin.java:381) at org.eclipse.jdt.internal.ui.InitializeAfterLoadJob$RealJob.run(InitializeAfterLoadJob.java:36) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) ... 6 more !SUBENTRY 1 org.eclipse.jdt.ui 4 4 2010-06-08 19:24:41.442 !MESSAGE Problems reading information from XML 'OpenTypeHistory.xml' !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.<init>(OpenTypeHistory.java:199) at org.eclipse.jdt.internal.corext.util.OpenTypeHistory.getInstance(OpenTypeHistory.java:185) at org.eclipse.jdt.internal.ui.JavaPlugin.initializeAfterLoad(JavaPlugin.java:381) at org.eclipse.jdt.internal.ui.InitializeAfterLoadJob$RealJob.run(InitializeAfterLoadJob.java:36) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) !ENTRY org.eclipse.jdt.ui 4 10001 2010-06-08 19:24:50.435 !MESSAGE Internal Error !STACK 1 org.eclipse.jdt.internal.ui.JavaUIException: Problems reading information from XML 'QualifiedTypeNameHistory.xml' at org.eclipse.jdt.internal.corext.util.History.createException(History.java:70) at org.eclipse.jdt.internal.corext.util.History.load(History.java:257) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.<init>(QualifiedTypeNameHistory.java:33) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.getDefault(QualifiedTypeNameHistory.java:26) at org.eclipse.jdt.internal.ui.JavaPlugin.stop(JavaPlugin.java:602) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:843) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.stop(BundleContextImpl.java:836) at org.eclipse.osgi.framework.internal.core.BundleHost.stopWorker(BundleHost.java:474) at org.eclipse.osgi.framework.internal.core.AbstractBundle.suspend(AbstractBundle.java:546) at org.eclipse.osgi.framework.internal.core.Framework.suspendBundle(Framework.java:1098) at org.eclipse.osgi.framework.internal.core.StartLevelManager.decFWSL(StartLevelManager.java:593) at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:261) at org.eclipse.osgi.framework.internal.core.StartLevelManager.shutdown(StartLevelManager.java:216) at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.suspend(InternalSystemBundle.java:266) at org.eclipse.osgi.framework.internal.core.Framework.shutdown(Framework.java:685) at org.eclipse.osgi.framework.internal.core.Framework.close(Framework.java:583) at org.eclipse.core.runtime.adaptor.EclipseStarter.shutdown(EclipseStarter.java:409) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:200) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) Caused by: org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) ... 25 more !SUBENTRY 1 org.eclipse.jdt.ui 4 4 2010-06-08 19:24:50.435 !MESSAGE Problems reading information from XML 'QualifiedTypeNameHistory.xml' !STACK 0 org.xml.sax.SAXParseException: Content is not allowed in prolog. at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:264) at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:292) at org.eclipse.jdt.internal.corext.util.History.load(History.java:255) at org.eclipse.jdt.internal.corext.util.History.load(History.java:166) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.<init>(QualifiedTypeNameHistory.java:33) at org.eclipse.jdt.internal.corext.util.QualifiedTypeNameHistory.getDefault(QualifiedTypeNameHistory.java:26) at org.eclipse.jdt.internal.ui.JavaPlugin.stop(JavaPlugin.java:602) at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:843) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.osgi.framework.internal.core.BundleContextImpl.stop(BundleContextImpl.java:836) at org.eclipse.osgi.framework.internal.core.BundleHost.stopWorker(BundleHost.java:474) at org.eclipse.osgi.framework.internal.core.AbstractBundle.suspend(AbstractBundle.java:546) at org.eclipse.osgi.framework.internal.core.Framework.suspendBundle(Framework.java:1098) at org.eclipse.osgi.framework.internal.core.StartLevelManager.decFWSL(StartLevelManager.java:593) at org.eclipse.osgi.framework.internal.core.StartLevelManager.doSetStartLevel(StartLevelManager.java:261) at org.eclipse.osgi.framework.internal.core.StartLevelManager.shutdown(StartLevelManager.java:216) at org.eclipse.osgi.framework.internal.core.InternalSystemBundle.suspend(InternalSystemBundle.java:266) at org.eclipse.osgi.framework.internal.core.Framework.shutdown(Framework.java:685) at org.eclipse.osgi.framework.internal.core.Framework.close(Framework.java:583) at org.eclipse.core.runtime.adaptor.EclipseStarter.shutdown(EclipseStarter.java:409) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:200) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:592) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)

  Read the article

• WNetAddConnection2 in Windows 7 with Impersonation and no Error Code

  - by Adam Driscoll

  I'm doing some crazy impersonation stuff to get around UAC dialogs in Windows 7 so the user does not have to interact with the UI (I have the admin creds of course). I have a process running as the Administrator and elevated past UAC. The issue that I'm facing is that when I make a call to WNetAddConnection2, within this process, I am not getting a new mapped net drive. The function returns ERROR_SUCCESS but no net drive is visible. We have another method of adding network drives using 'subst' but this, again, returns successful does does not add a net drive. I have tried to use the default user (which is the Administrator because of process's security context) and I have tried using specific user credentials. I can map the drive just fine through Explorer. Of course the same functionality works fine in XP/2003. I haven't got around to testing on Vista because of issues with impersonation that are limiting my ability to spin up the process. Are there unique Windows 7 limits on this function? MSDN does not glean any that I can find. Any help would be greatly appreciated!

  Read the article

• How do I create a named temporary file on windows in Python?

  - by Chris B.

  I've got a Python program that needs to create a named temporary file which will be opened and closed a couple times over the course of the program, and should be deleted when the program exits. Unfortunately, none of the options in tempfile seem to work: TemporaryFile doesn't have a visible name NamedTemporaryFile creates a file-like object. I just need a filename. I've tried closing the object it returns (after setting delete = False) but I get stream errors when I try to open the file later. SpooledTemporaryFile doesn't have a visible name mkstemp returns both the open file object and the name; it doesn't guarantee the file is deleted when the program exits mktemp returns the filename, but doesn't guarantee the file is deleted when the program exits I've tried using mktemp1 within a context manager, like so: def get_temp_file(suffix): class TempFile(object): def __init__(self): self.name = tempfile.mktemp(suffix = '.test') def __enter__(self): return self def __exit__(self, ex_type, ex_value, ex_tb): if os.path.exists(self.name): try: os.remove(self.name) except: print sys.exc_info() return TempFile() ... but that gives me a WindowsError(32, 'The process cannot access the file because it is being used by another process'). The filename is used by a process my program spawns, and even though I ensure that process finishes before I exit, it seems to have a race condition out of my control. What's the best way of dealing with this? 1 I don't need to worry about security here; this is part of a testing module, so the most someone nefarious could do is cause our unit tests to spuriously fail. The horror!

  Read the article

• javax.servlet.ServletException: Servlet.init() for servlet Relay threw exception

  - by Talha Bin Shakir

  I built application by using Netbeans and its working fine. But When i deployed on TOMCAT I am getting this error javax.servlet.ServletException: Servlet.init() for servlet Relay threw exception org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) java.lang.Thread.run(Thread.java:636) *root cause* java.security.AccessControlException: access denied (java.util.PropertyPermission jasper.reports.compile.class.path write) java.security.AccessControlContext.checkPermission(AccessControlContext.java:342) java.security.AccessController.checkPermission(AccessController.java:553) java.lang.SecurityManager.checkPermission(SecurityManager.java:549) java.lang.System.setProperty(System.java:744) com.servlet.Relay.init(Relay.java:38) javax.servlet.GenericServlet.init(GenericServlet.java:212) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) java.lang.reflect.Method.invoke(Method.java:616) org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:269) java.security.AccessController.doPrivileged(Native Method) javax.security.auth.Subject.doAsPrivileged(Subject.java:537) org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:301) org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162) org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:115) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) Any Idea.

  Read the article

• Error loading WebappClassLoader in Tomcat

  - by Liron Yahdav

  I tried starting Tomcat and deploying my webapp from NetBeans after adding and configuring a new servlet. I got the following in the Tomcat error log: INFO: Marking servlet MyServlet as unavailable SEVERE: Error loading WebappClassLoader delegate: false repositories: /WEB-INF/classes/ ----------> Parent Classloader: org.apache.catalina.loader.StandardClassLoader@bb6086 MyServlet java.lang.ClassNotFoundException: MyServlet at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1387) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1095) at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:809) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) SEVERE: Allocate exception for servlet MyServlet java.lang.ClassNotFoundException: MyServlet at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1387) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1095) at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:809) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:129) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454) at java.lang.Thread.run(Thread.java:619) I'm using NetBeans 6.8 and Tomcat 6.

  Read the article

• CreateProcess doesn't pass command line arguments

  - by mnh

  Hello I have the following code but it isn't working as expected, can't figure out what the problem is. Basically, I'm executing a process (a .NET process) and passing it command line arguments, it is executed successfully by CreateProcess() but CreateProcess() isn't passing the command line arguments What am I doing wrong here?? int main(int argc, char* argv[]) { PROCESS_INFORMATION ProcessInfo; //This is what we get as an [out] parameter STARTUPINFO StartupInfo; //This is an [in] parameter ZeroMemory(&StartupInfo, sizeof(StartupInfo)); StartupInfo.cb = sizeof StartupInfo ; //Only compulsory field LPTSTR cmdArgs = "[email protected]"; if(CreateProcess("D:\\email\\smtp.exe", cmdArgs, NULL,NULL,FALSE,0,NULL, NULL,&StartupInfo,&ProcessInfo)) { WaitForSingleObject(ProcessInfo.hProcess,INFINITE); CloseHandle(ProcessInfo.hThread); CloseHandle(ProcessInfo.hProcess); printf("Yohoo!"); } else { printf("The process could not be started..."); } return 0; } EDIT: Hey one more thing, if I pass my cmdArgs like this: // a space as the first character LPTSTR cmdArgs = " [email protected]"; Then I get the error, then CreateProcess returns TRUE but my target process isn't executed. Object reference not set to an instance of an object

  Read the article

• ps forrest for session id

  - by azatoth

  Often I want to get a nice readout what process are running and their relationship; I usually by habit runs ps auxfww and eventual grep for the process in question. Having been thinking about the problem I tried to create an oneliner to get the process tree in ps ufww format for all processes which has the session id specified by arbitrary process name(s); ending up in following code: ps ufww --sid=$(ps -C apache2 -o sess --no-headers | sort | uniq | grep -v -E '^ +0$' | awk 'NR==1{x=$0;next}NF{x=x","$0};END{gsub(/[[:space:]]*/,"",x);print x}') giving for example following output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 4157 0.0 0.1 41264 3120 ? Ss Jun11 0:00 /usr/sbin/apache2 -k start www-data 4329 0.0 0.0 41264 1976 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4330 0.0 0.0 41264 2028 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4331 0.0 0.0 41264 2028 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4332 0.0 0.0 41264 2028 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4333 0.0 0.0 41264 2032 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 6648 0.0 0.0 41264 1884 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 6654 0.0 0.0 41264 1884 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 6655 0.0 0.0 41264 1884 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start I do wonder now if anyone has an better idea to solve this issue? Are there anything out there that is easier to "oneline" and gives above or better information? For example I would actually want to have included all childs relative any parent. (uncertain if this should be on SF instead, but felt it was more like an programming question)

  Read the article

• Databinding in WinForms performing async data import

  - by burnside

  I have a scenario where I have a collection of objects bound to a datagrid in winforms. If a user drags and drops an item on to the grid, I need to add a placeholder row into the grid and kick off a lengthy async import process. I need to communicate the status of the async import process back to the UI, updating the row in the grid and have the UI remain responsive to allow the user to edit the other rows. What's the best practice for doing this? My current solution is: binding a thread safe implementation of BindingList to the grid, filled with the objects that are displayed as rows in the grid. When a user drags and drops an item on to the grid, I create a new object containing the sparse info obtained from the dropped item and add that to the BindingList, disabling the editing of that row. I then fire off a separate thread to do the import, passing it the newly bound object I have just created to fill with data. The import process, periodically sets the status of the object and fires an event which is subscribed to by the UI telling it to refresh the grid to see the new properties on the object. Should I be passing the same object that is bound to the grid to the import process thread to operate on, or should I be creating a copy and merging back the changes to the object on the UI thread using BeginInvoke? Any problems or advice with this implementation? Thanks

  Read the article

• Implementing the outside application „openedFileView“ in c# Project

  - by case23

  I work on a application where i want to find out which files on my filesystem is used by a Process. After trying around with the System.Diagnostics.Process class, and didn´t get the resulst i wanted i find the application called OpenedFileView from Nirsoft. http://www.nirsoft.net/utils/opened_files_view.html Basically it does exactly what i want but i have some problems with the implimication in my project. The option wich “OpenedFileView” gives you is to start it with some arguments that it creates you an txt file with all the information i want. But for my case i want to whach the processes in realtime, and if i start the application repetitively i always have the hourglass at my mouse cursor. So after this i tryed some ways to get rid of it, tryed out to put it in a BackgroundWorker Thread. But this changed nothing at all. I also looked for a way to force the Process not to exit, and sending new arguments to it, but this also didn´t worked. So is there any way to use this application in the way I want, or does this didn´t work at all? I hope somebody can help me either with getting away this annoying mouse cursor hourglass, or with a better implimication of this application so i can use it in realtime! Thanks alot! private void start() { _openedFileView = new Process(); _openedFileView.StartInfo.FileName = "pathToApp\\OpenedFilesView.exe"; _openedFileView.EnableRaisingEvents = true; _openedFileView.Exited += new EventHandler(myProcess_Exited); _openedFileView.StartInfo.Arguments = "/scomma pathToOutputFile"; _openedFileView.Start(); } private void myProcess_Exited(object sender, System.EventArgs e) { start(); }

  Read the article

• best practice for directory polling

  - by Hieu Lam

  Hi all, I have to do batch processing to automate business process. I have to poll directory at regular interval to detect new files and do processing. While old files is being processed, new files can come in. For now, I use quartz scheduler and thread synchronization to ensure that only one thread can process files. Part of the code are: application-context.xml <bean id="methodInvokingJob" class="org.springframework.scheduling.quartz.MethodInvokingJobDetailFactoryBean" <property name="targetObject" ref="documentProcessor" / <property name="targetMethod" value="processDocuments" / </bean DocumentProcessor ..... public void processDocuments() { LOG.info(Thread.currentThread().getName() + " attempt to run."); if (!processing) { synchronized (this) { try { processing = true; LOG.info(Thread.currentThread().getName() + " is processing"); List xmlDocuments = documentManager.getFileNamesFromFolder(incomingFolderPath); // loop over the files and processed unlock files. for (String xmlDocument : xmlDocuments) { processDocument(xmlDocument); } } finally { processing = false; } } } } For the current code, I have to prevent other thread to process files when one thread is processing. Is that a good idea ? or we support multi-threaded processing. In that case how can I know which files is being process and which files has just arrived ? Any idea is really appreciated.

  Read the article

• rails foreman does not load all my services on start

  - by Rubytastic

  Rails foreman does not load all my services defined in Procfile. Procfile.rb: redis: redis-server resque: bundle exec rake resque:start &&> log/resque_worker_queue.log privpub: bundle exec rackup private_pub.ru -s thin -E production & &> log/private_pub.log sunspot: bundle exec rake sunspot:solr:run I always have to manually start all of them by copy paste the commands in terminal foreman start does not work, what am i missing? This is foreman output: 12:35:40 privpub.1 | process terminated 12:35:40 system | sending SIGTERM to all processes 12:35:40 system | sending SIGTERM to pid 4375 12:35:40 redis.1 | [4375] 02 Jun 12:35:40 # Received SIGTERM, scheduling shutdown... 12:35:40 redis.1 | [4375] 02 Jun 12:35:40 # User requested shutdown... 12:35:40 redis.1 | [4375] 02 Jun 12:35:40 * Saving the final RDB snapshot before exiting. 12:35:40 redis.1 | [4375] 02 Jun 12:35:40 * DB saved on disk 12:35:40 redis.1 | [4375] 02 Jun 12:35:40 # Redis is now ready to exit, bye bye... 12:35:40 system | sending SIGTERM to pid 4376 12:35:40 resque.1 | rake aborted! 12:35:40 resque.1 | SIGTERM 12:35:40 resque.1 | 12:35:40 resque.1 | (See full trace by running task with --trace) 12:35:40 system | sending SIGTERM to pid 4378 12:35:40 sunspot.1 | rake aborted! 12:35:40 sunspot.1 | SIGTERM 12:35:40 sunspot.1 | 12:35:40 sunspot.1 | (See full trace by running task with --trace) 12:35:40 sunspot.1 | process terminated 12:35:40 resque.1 | process terminated 12:35:40 redis.1 | process terminated

  Read the article

• Oracle rownum in db2 - Java data archiving

  - by HonorGod

  I have a data archiving process in java that moves data between db2 and sybase. FYI - This is not done through any import/export process because there are several conditions on each table that are available on run-time and so this process is developed in java. Right now I have single DatabaseReader and DatabaseWriter defined for each source and destination combination so that data is moved in multiple threads. I guess I wanted to expand this further where I can have Multiple DatabaseReaders and Multiple DatabaseWriters defined for each source and destination combination. So, for example if the source data is about 100 rows and I defined 10 readers and 10 writer, each reader will read 10 rows and give them to the writer. I hope process will give me extreme performance depending on the resources available on the server [CPU, Memory etc]. But I guess the problem is these source tables do not have primary keys and it is extremely difficult to grab rows in multiple sets. Oracle provides rownum concept and i guess the life is much simpler there....but how about db2? How can I achieve this behavior with db2? Is there a way to say fetch first 10 records and then fetch next 10 records and so on? Any suggestions / ideas ? Db2 Version - DB2 v8.1.0.144 Fix Pack Num - 16 Linux

  Read the article

• WCF InProcFactory error

  - by Terence Lewis

  I'm using IDesign's ServiceModelEx assembly to provide additional functionality over and above what's available in standard WCF. In particular I'm making use of InProcFactory to host some WCF services within my process using Named Pipes. However, my process also declares a TCP endpoint in its configuration file, which I host and open when the process starts. At some later point, when I try to host a second instance of this service using the InProcFactory through the named pipe (from a different service in the same process), for some reason it picks up the TCP endpoint in the configuration file and tries to re-host this endpoint, which throws an exception as the TCP port is already in use from the first hosting. Here is the relevant code from InProcFactory.cs in ServiceModelEx: static HostRecord GetHostRecord<S,I>() where I : class where S : class,I { HostRecord hostRecord; if(m_Hosts.ContainsKey(typeof(S))) { hostRecord = m_Hosts[typeof(S)]; } else { ServiceHost<S> host; if(m_Singletons.ContainsKey(typeof(S))) { S singleton = m_Singletons[typeof(S)] as S; Debug.Assert(singleton != null); host = new ServiceHost<S>(singleton,BaseAddress); } else { host = new ServiceHost<S>(BaseAddress); } string address = BaseAddress.ToString() + Guid.NewGuid().ToString(); hostRecord = new HostRecord(host,address); m_Hosts.Add(typeof(S),hostRecord); host.AddServiceEndpoint(typeof(I),Binding,address); if(m_Throttles.ContainsKey(typeof(S))) { host.SetThrottle(m_Throttles[typeof(S)]); } // This line fails because it tries to open two endpoints, instead of just the named-pipe one host.Open(); } return hostRecord; }

  Read the article

• multithreading in c#

  - by Lalit Dhake

  Hi, I have console application. In that i have some process that fetch the data from database through different layers ( business and Data access). stores the fetched data in respective objects. Like if data is fetched for student then this data will store (assigned ) to Student object. same for school. and them a delegate call the certain method that generates outputs as per requirement. This process will execute many times say 10 times. Ok? I want to run simultaneously this process. not one will start, it will finish and then second will start. I want after starting 1'st process, just 2'nd , 3rd....10'th must be start. Means it should be multithreading. how can i achieve this ? is that will give me error while connection with data base open and close ? I have tried this concept . but when thread 1'st is starting then data will fetched for thread 1 will stored in its respective (student , school) objects. ok? when simultaneous 2'nd thread starts , but the data is changing of 1'st object ,while control flowing in program. What have to do?

  Read the article

• LogonUser -> CreateProcessAsUser from a system service

  - by Josh K

  I've read all the posts on Stack Overflow about CreateProcessAsUser and there are very few resolved questions, so I'm not holding my breath on this one. But it seems like I'm definitely missing something, so it might be easy. The target OS is Windows XP. I have a service running as "Local System" from which I want to create a process running as a different user. For that user, I have the username and password, so LogonUser goes fine and I get a token for the user (in this case, an Administrator account.) I then try to use that token to call CreateProcessAsUser, but it fails because that token does not come with SeAssignPrimaryTokenPrivilege - however, it does have SeIncreaseQuotaPrivilege. (I used GetTokenInformation to dump all the privileges associated with that token.) According to the MSDN page for CreateProcessAsUser, you need both privileges in order to call CreateProcessAsUser successfully. It also says you don't need the SeAssignPrimaryTokenPrivilege if the token you pass in to CreateProcessAsUser() is a "restricted version of the calling process' primary token", which I can create with CreateRestrictedToken(), but then it will be associated with the Local System user and not the target user I'm trying to run the process as. So how would I create a logon token that is both a restricted version of the calling process' primary token, AND is associated with a different user? Thanks! Note that there is no need for user interaction in here - it's all unattended - so there's no need to do stuff like grabbing WINSTA0, etc.

  Read the article

• MPI hypercube broadcast error

  - by luvieere

  I've got a one to all broadcast method for a hypercube, written using MPI: one2allbcast(int n, int rank, void *data, int count, MPI_Datatype dtype) { MPI_Status status; int mask, partner; int mask2 = ((1 << n) - 1) ^ (1 << n-1); for (mask = (1 << n-1); mask; mask >>= 1, mask2 >>= 1) { if (rank & mask2 == 0) { partner = rank ^ mask; if (rank & mask) MPI_Recv(data, count, dtype, partner, 99, MPI_COMM_WORLD, &status); else MPI_Send(data, count, dtype, partner, 99, MPI_COMM_WORLD); } } } Upon calling it from main: int main( int argc, char **argv ) { int n, rank; MPI_Init (&argc, &argv); MPI_Comm_size (MPI_COMM_WORLD, &n); MPI_Comm_rank (MPI_COMM_WORLD, &rank); one2allbcast(floor(log(n) / log (2)), rank, "message", sizeof(message), MPI_CHAR); MPI_Finalize(); return 0; } compiling and executing on 8 nodes, I receive a series of errors reporting that processes 1, 3, 5, 7 were stopped before the point of receiving any data: MPI_Recv: process in local group is dead (rank 1, MPI_COMM_WORLD) Rank (1, MPI_COMM_WORLD): Call stack within LAM: Rank (1, MPI_COMM_WORLD): - MPI_Recv() Rank (1, MPI_COMM_WORLD): - main() MPI_Recv: process in local group is dead (rank 3, MPI_COMM_WORLD) Rank (3, MPI_COMM_WORLD): Call stack within LAM: Rank (3, MPI_COMM_WORLD): - MPI_Recv() Rank (3, MPI_COMM_WORLD): - main() MPI_Recv: process in local group is dead (rank 5, MPI_COMM_WORLD) Rank (5, MPI_COMM_WORLD): Call stack within LAM: Rank (5, MPI_COMM_WORLD): - MPI_Recv() Rank (5, MPI_COMM_WORLD): - main() MPI_Recv: process in local group is dead (rank 7, MPI_COMM_WORLD) Rank (7, MPI_COMM_WORLD): Call stack within LAM: Rank (7, MPI_COMM_WORLD): - MPI_Recv() Rank (7, MPI_COMM_WORLD): - main() Where do I go wrong?

  Read the article

• Starting CLI application programmatically does not work depending on arguments

  - by Daniel Beck

  I try to start plink.exe (PuTTY Link, the command line utility/version of PuTTY) from a C# application to establish an SSH reverse tunnel, but it does no longer work as soon as I pass the correct parameters. What does that mean? The following works as expected: it opens a command line window, displays that I forgot to pass the password for the -pw argument quits, and shows the prompt. I know it got the arguments, since it specifically requests the one thing I did not provide. Uri uri = omitted; ProcessStartInfo info = new ProcessStartInfo(); info.FileName = "cmd"; info.Arguments = "/k \"C:\\Program Files (x86)\\PuTTY\\plink.exe\" -R 3389:" + uri.Host + ":" + uri.Port + " -N -l username -pw"; // TODO pwd Process p = Process.Start(info); I tried the same think with calling plink.exe directly instead of cmd.exe /k, but the window closes immediately, which is unfortunate for bug-hunting. BUT when I pass a password in the arguments, plink.exe displays the program help (showing available parameters) and quits: Uri uri = omitted; ProcessStartInfo info = new ProcessStartInfo(); info.FileName = "cmd"; info.Arguments = "/k \"C:\\Program Files (x86)\\PuTTY\\plink.exe\" -R 3389:" + uri.Host + ":" + uri.Port + " -N -l username -pw secretpassword"; Process p = Process.Start(info); No indication of missing parameters. Both the cmd /k and plink.exe variants do not work (the latter closes immediately, so no information regarding different behaviour). When I launch the application from the Windows 7 Start Menu launcher with the identical parameters, it opens a cmd.exe window and establishes the connection as requested. What's wrong? Is there a way plink.exe notices it's not running in a real shell? If yes, how can I circumvent it, like the Start Menu "prompt" does? I hope this question is right on SO, since it, though specifically for a single application, revolves around launching it successfully programmatically.

  Read the article

• Unable to logon to vpn

  - by nitin pande

  My openvpn client log file- The interesting bit: Tue Oct 26 12:32:49 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:49 2010 TCP/UDP: Closing socket The rest of the log just in case: Tue Oct 26 12:32:35 2010 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Tue Oct 26 12:32:48 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:48 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Oct 26 12:32:48 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 12:32:48 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 12:32:48 2010 LZO compression initialized Tue Oct 26 12:32:48 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:48 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:48 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:48 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:48 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:32:48 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:32:48 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:32:48 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 TLS: Initial packet from 67.228.223.12:3389, sid=bd5f79fe 8475497f Tue Oct 26 12:32:49 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:49 2010 TCP/UDP: Closing socket Tue Oct 26 12:32:49 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:32:49 2010 Restart pause, 5 second(s) Tue Oct 26 12:32:54 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:54 2010 Re-using SSL/TLS context Tue Oct 26 12:32:54 2010 LZO compression initialized Tue Oct 26 12:32:54 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:54 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:54 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:54 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:54 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:32:54 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TLS: Initial packet from 67.228.223.12:3389, sid=1643b931 ce240d5f Tue Oct 26 12:32:54 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:54 2010 TCP/UDP: Closing socket Tue Oct 26 12:32:54 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:32:54 2010 Restart pause, 5 second(s) Tue Oct 26 12:32:59 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:59 2010 Re-using SSL/TLS context Tue Oct 26 12:32:59 2010 LZO compression initialized Tue Oct 26 12:32:59 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:59 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:59 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:59 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:59 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:00 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TLS: Initial packet from 67.228.223.12:3389, sid=cd439fb2 d625ca0d Tue Oct 26 12:33:00 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:00 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:00 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:00 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:05 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:05 2010 Re-using SSL/TLS context Tue Oct 26 12:33:05 2010 LZO compression initialized Tue Oct 26 12:33:05 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:05 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:05 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:05 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:05 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:06 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TLS: Initial packet from 67.228.223.12:3389, sid=28f0cb87 69c90cde Tue Oct 26 12:33:06 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:06 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:06 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:06 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:11 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:11 2010 Re-using SSL/TLS context Tue Oct 26 12:33:11 2010 LZO compression initialized Tue Oct 26 12:33:11 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:11 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:11 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:11 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:11 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:11 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:11 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:11 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:12 2010 TLS: Initial packet from 67.228.223.12:3389, sid=128becf9 f62adf0c Tue Oct 26 12:33:12 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:12 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:12 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:12 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:12 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:17 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:17 2010 Re-using SSL/TLS context Tue Oct 26 12:33:17 2010 LZO compression initialized Tue Oct 26 12:33:17 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:17 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:17 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:17 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:17 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:20 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:20 2010 SIGTERM[hard,init_instance] received, process exiting Guys I am extremely sorry for not presenting my error Log properly, please forgive me and give me your valuable advice. I am using windows 7 and I am using openvpn mainly to bypass censorship at UAE. I am using only client config file. Ca.crt file is in config folder Thanks and regards Nitin My error Log with Config1 file Tue Oct 26 21:24:34 2010 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Tue Oct 26 21:24:46 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 21:24:46 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Oct 26 21:24:46 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 21:24:46 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 21:24:46 2010 LZO compression initialized Tue Oct 26 21:24:46 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 21:24:46 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 21:24:46 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 21:24:46 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 21:24:46 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 21:24:47 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TLS: Initial packet from 67.228.223.12:3389, sid=4244e662 e5a0572a Tue Oct 26 21:24:47 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 21:24:47 2010 TCP/UDP: Closing socket Tue Oct 26 21:24:47 2010 SIGUSR1[soft,tls-error] received, process restarting client config file: client dev tun proto tcp remote openvpn1.flashvpn.com 3389 float resolv-retry infinite nobind persist-key persist-tun ca ca.crt ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 auth-user-pass route-method exe route-delay 2

  Read the article

• Delphi: Alternative to using Assign/ReadLn for text file reading

  - by Ian Boyd

  i want to process a text file line by line. In the olden days i loaded the file into a StringList: slFile := TStringList.Create(); slFile.LoadFromFile(filename); for i := 0 to slFile.Count-1 do begin oneLine := slFile.Strings[i]; //process the line end; Problem with that is once the file gets to be a few hundred megabytes, i have to allocate a huge chunk of memory; when really i only need enough memory to hold one line at a time. (Plus, you can't really indicate progress when you the system is locked up loading the file in step 1). The i tried using the native, and recommended, file I/O routines provided by Delphi: var f: TextFile; begin Assign(filename, f); while ReadLn(f, oneLine) do begin //process the line end; Problem withAssign is that there is no option to read the file without locking (i.e. fmShareDenyNone). The former stringlist example doesn't support no-lock either, unless you change it to LoadFromStream: slFile := TStringList.Create; stream := TFileStream.Create(filename, fmOpenRead or fmShareDenyNone); slFile.LoadFromStream(stream); stream.Free; for i := 0 to slFile.Count-1 do begin oneLine := slFile.Strings[i]; //process the line end; So now even though i've gained no locks being held, i'm back to loading the entire file into memory. Is there some alternative to Assign/ReadLn, where i can read a file line-by-line, without taking a sharing lock? i'd rather not get directly into Win32 CreateFile/ReadFile, and having to deal with allocating buffers and detecting CR, LF, CRLF's. i thought about memory mapped files, but there's the difficulty if the entire file doesn't fit (map) into virtual memory, and having to maps views (pieces) of the file at a time. Starts to get ugly. i just want Assign with fmShareDenyNone!

  Read the article

• How to make Processes Run Parallel in Erlang?

  - by Ankit S

  Hello, startTrains() -> TotalDist = 100, Trains = [trainA,trainB ], PID = spawn(fun() -> train(1,length(Trains)) end), [ PID ! {self(),TrainData,TotalDist} || TrainData <- Trains], receive {_From, Mesg} -> error_logger:info_msg("~n Mesg ~p ~n",[Mesg]) after 10500 -> refresh end. so, I created Two Processes named trainA, trainB. I want to increment these process by 5 till it gets 100. I made different processes to make each of the train (process) increments its position parallely. But I was surprised to get the output sequentially i.e process trainA ends then process trainB starts. But I want to increment themselves at simultaneously. I want to run processes like this trainA 10 trainB 0 trainA 15 trainB 5 .... trainA 100 trainB 100 but I m getting trainA 0 .... trainA 90 trainA 95 trainA 100 trainA ends trainB 0 trainB 5 trainB 10 ..... trainB 100 How to make the processes run parallel/simultaneously? Hope you get my Q's. Please help me.

  Read the article

• How to print PDF on default network printer using GhostScript (gswin32c.exe) shell command

  - by Maciej

  I'd like to print PDF file(s) on windows' network printer via GhostScript. (I dont want to use Adobe Reader) I've read gswin32c.exe which can do the job. I experimented with many commands and coudn't find the way how to force gs to print PDF on my (windows default) network drive. I don't need point exact network printer- default can be used. But if there is no such option I'm happy to pass printer name as well. (I've tried with param -SDevice="\server_IP\printer_name" but this didnt work as well...) Command working under Windows cmd: gswin32c -dPrinted -dBATCH -dNOPAUSE -dNOSAFER -q -dNumCopies=1 -sDEVICE=ljet4 -sOutputFile="\\spool\\\Server_Name\Printer_name" "C:\test.pdf" Method created base on above - doesnt work and thorws exception. (Error code = 1) /// <summary> /// Prints the PDF. /// </summary> /// <param name="ghostScriptPath">The ghost script path. Eg "C:\Program Files\gs\gs8.71\bin\gswin32c.exe"</param> /// <param name="numberOfCopies">The number of copies.</param> /// <param name="printerName">Name of the printer. Eg \\server_name\printer_name</param> /// <param name="pdfFileName">Name of the PDF file.</param> /// <returns></returns> public bool PrintPDF (string ghostScriptPath, int numberOfCopies, string printerName, string pdfFileName) { ProcessStartInfo startInfo = new ProcessStartInfo(); startInfo.Arguments = " -dPrinted -dBATCH -dNOPAUSE -dNOSAFER -q -dNumCopies=" + Convert.ToString(numberOfCopies) + " -sDEVICE=ljet4 -sOutputFile=\"\\\\spool\\" + printerName + "\" \"" + pdfFileName + "\""; startInfo.FileName = ghostScriptPath; startInfo.UseShellExecute = false; Process process = Process.Start(startInfo); return process.ExitCode == 0; } Any idea how to make it working under C#?

  Read the article

• Preventing Processes From Spawning Using .NET Code

  - by Matt

  I remember coming across an article on I think CodeProject quite some time ago regarding an antivirus or antimalware some guy was writing where he hooked into the Windows API to be able to catch whenever a new process was started and was prompting he user before allowing the process to start. I can no longer find the article, and would actually like to be able to implement something like this. Currently, we have a custom browser built on Gecko that we've integrated access restrictions to sites based on our internal employee security levels, etc. We prevent any other browser from running with a timer and a call to Process.GetProcessesByName() from a list of the browsers we don't allow. What we want to accomplish is, instead of just blocking these browsers, where there is a small delay between the other browser starting and it being killed by our service, we'd like to be able to display a dialog instead of the process launching at all, explaining that the program isn't in the allowed list. This way, we can generate a list of "allowed" processes and just block everything else (we haven't yet had a problem with outside apps being installed, but you can never be too careful). Unfortunately, we don't do much Windows API programming from C#, so I'm not sure where to begin looking for what calls we need to hook. Even just a starting point of what to read up on would be helpful.

  Read the article

• ubuntu: sem_timedwait not waking (C)

  - by gillez

  I have 3 processes which need to be synchronized. Process one does something then wakes process two and sleeps, which does something then wakes process three and sleeps, which does something and wakes process one and sleeps. The whole loop is timed to run around 25hz (caused by an external sync into process one before it triggers process two in my "real" application). I use sem_post to trigger (wake) each process, and sem_timedwait() to wait for the trigger. This all works successfully for several hours. However at some random time (usually after somewhere between two and four hours), one of the processes starts timing out in sem_timedwait(), even though I am sure the semaphore is being triggered with sem_post(). To prove this I even use sem_getvalue() immediately after the timeout, and the value is 1, so the timedwait should have been triggered. Please see following code: #include <stdio.h> #include <time.h> #include <string.h> #include <errno.h> #include <semaphore.h> sem_t trigger_sem1, trigger_sem2, trigger_sem3; // The main thread process. Called three times with a different num arg - 1, 2 or 3. void *thread(void *arg) { int num = (int) arg; sem_t *wait, *trigger; int val, retval; struct timespec ts; struct timeval tv; switch (num) { case 1: wait = &trigger_sem1; trigger = &trigger_sem2; break; case 2: wait = &trigger_sem2; trigger = &trigger_sem3; break; case 3: wait = &trigger_sem3; trigger = &trigger_sem1; break; } while (1) { // The first thread delays by 40ms to time the whole loop. // This is an external sync in the real app. if (num == 1) usleep(40000); // print sem value before we wait. If this is 1, sem_timedwait() will // return immediately, otherwise it will block until sem_post() is called on this sem. sem_getvalue(wait, &val); printf("sem%d wait sync sem%d. val before %d\n", num, num, val); // get current time and add half a second for timeout. gettimeofday(&tv, NULL); ts.tv_sec = tv.tv_sec; ts.tv_nsec = (tv.tv_usec + 500000); // add half a second if (ts.tv_nsec > 1000000) { ts.tv_sec++; ts.tv_nsec -= 1000000; } ts.tv_nsec *= 1000; /* convert to nanosecs */ retval = sem_timedwait(wait, &ts); if (retval == -1) { // timed out. Print value of sem now. This should be 0, otherwise sem_timedwait // would have woken before timeout (unless the sem_post happened between the // timeout and this call to sem_getvalue). sem_getvalue(wait, &val); printf("!!!!!! sem%d sem_timedwait failed: %s, val now %d\n", num, strerror(errno), val); } else printf("sem%d wakeup.\n", num); // get value of semaphore to trigger. If it's 1, don't post as it has already been // triggered and sem_timedwait on this sem *should* not block. sem_getvalue(trigger, &val); if (val <= 0) { printf("sem%d send sync sem%d. val before %d\n", num, (num == 3 ? 1 : num+1), val); sem_post(trigger); } else printf("!! sem%d not sending sync, val %d\n", num, val); } } int main(int argc, char *argv[]) { pthread_t t1, t2, t3; // create semaphores. val of sem1 is 1 to trigger straight away and start the whole ball rolling. if (sem_init(&trigger_sem1, 0, 1) == -1) perror("Error creating trigger_listman semaphore"); if (sem_init(&trigger_sem2, 0, 0) == -1) perror("Error creating trigger_comms semaphore"); if (sem_init(&trigger_sem3, 0, 0) == -1) perror("Error creating trigger_vws semaphore"); pthread_create(&t1, NULL, thread, (void *) 1); pthread_create(&t2, NULL, thread, (void *) 2); pthread_create(&t3, NULL, thread, (void *) 3); pthread_join(t1, NULL); pthread_join(t2, NULL); pthread_join(t3, NULL); } The following output is printed when the program is running correctly (at the start and for a random but long time after). The value of sem1 is always 1 before thread1 waits as it sleeps for 40ms, by which time sem3 has triggered it, so it wakes straight away. The other two threads wait until the semaphore is received from the previous thread. [...] sem1 wait sync sem1. val before 1 sem1 wakeup. sem1 send sync sem2. val before 0 sem2 wakeup. sem2 send sync sem3. val before 0 sem2 wait sync sem2. val before 0 sem3 wakeup. sem3 send sync sem1. val before 0 sem3 wait sync sem3. val before 0 sem1 wait sync sem1. val before 1 sem1 wakeup. sem1 send sync sem2. val before 0 [...] However, after a few hours, one of the threads begins to timeout. I can see from the output that the semaphore is being triggered, and when I print the value after the timeout is is 1. So sem_timedwait should have woken up well before the timeout. I would never expect the value of the semaphore to be 1 after the timeout, save for the very rare occasion (almost certainly never but it's possible) when the trigger happens after the timeout but before I call sem_getvalue. Also, once it begins to fail, every sem_timedwait() on that semaphore also fails in the same way. See the following output, which I've line-numbered: 01 sem3 wait sync sem3. val before 0 02 sem1 wakeup. 03 sem1 send sync sem2. val before 0 04 sem2 wakeup. 05 sem2 send sync sem3. val before 0 06 sem2 wait sync sem2. val before 0 07 sem1 wait sync sem1. val before 0 08 !!!!!! sem3 sem_timedwait failed: Connection timed out, val now 1 09 sem3 send sync sem1. val before 0 10 sem3 wait sync sem3. val before 1 11 sem3 wakeup. 12 !! sem3 not sending sync, val 1 13 sem3 wait sync sem3. val before 0 14 sem1 wakeup. [...] On line 1, thread 3 (which I have confusingly called sem1 in the printf) waits for sem3 to be triggered. On line 5, sem2 calls sem_post for sem3. However, line 8 shows sem3 timing out, but the value of the semaphore is 1. thread3 then triggers sem1 and waits again (10). However, because the value is already 1, it wakes straight away. It doesn't send sem1 again as this has all happened before control is given to thread1, however it then waits again (val is now 0) and sem1 wakes up. This now repeats for ever, sem3 always timing out and showing that the value is 1. So, my question is why does sem3 timeout, even though the semaphore has been triggered and the value is clearly 1? I would never expect to see line 08 in the output. If it times out (because, say thread 2 has crashed or is taking too long), the value should be 0. And why does it work fine for 3 or 4 hours first before getting into this state? This is using Ubuntu 9.4 with kernel 2.6.28. The same procedure has been working properly on Redhat and Fedora. But I'm now trying to port to ubuntu! Thanks for any advice, Giles

  Read the article

• jQuery Ajax / .each callback, next 'each' firing before ajax completed

  - by StuR

  Hi the below Javascript is called when I submit a form. It first splits a bunch of url's from a text area, it then: 1) Adds lines to a table for each url, and in the last column (the 'status' column) it says "Not Started". 2) Again it loops through each url, first off it makes an ajax call to check on the status (status.php) which will return a percentage from 0 - 100. 3) In the same loop it kicks off the actual process via ajax (process.php), when the process has completed (bearing in the mind the continuous status updates), it will then say "Completed" in the status column and exit the auto_refresh. 4) It should then go to the next 'each' and do the same for the next url. function formSubmit(){ var lines = $('#urls').val().split('\n'); $.each(lines, function(key, value) { $('#dlTable tr:last').after('<tr><td>'+value+'</td><td>Not Started</td></tr>'); }); $.each(lines, function(key, value) { var auto_refresh = setInterval( function () { $.ajax({ url: 'status.php', success: function(data) { $('#dlTable').find("tr").eq(key+1).children().last().replaceWith("<td>"+data+"</td>"); } }); }, 1000); $.ajax({ url: 'process.php?id='+value, success: function(msg) { clearInterval(auto_refresh); $('#dlTable').find("tr").eq(key+1).children().last().replaceWith("<td>completed rip</td>"); } }); }); }

  Read the article

• wcf callback exception after updating to .net 4.0

  - by James

  I have a wcf service that uses callbacks with DualHttpBindings. The service pushes back a datatable of search results the client (for a long running search) as it finds them. This worked fine in .Net 3.5. Since I updated to .Net 4.0, it bombs out with a System.Runtime.FatalException that actually kills the IIS worker process. I have no idea how to even go about starting to fix this. Any recommendations appreciated. The info from the resulting event log is pasted below. An unhandled exception occurred and the process was terminated. Application ID: /LM/W3SVC/2/ROOT/CP Process ID: 5284 Exception: System.Runtime.FatalException Message: Object reference not set to an instance of an object. StackTrace: at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet) at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(RequestContext request, Boolean cleanThread, OperationContext currentOperationContext) at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(RequestContext request, OperationContext currentOperationContext) at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.Runtime.InputQueue1.AsyncQueueReader.Set(Item item) at System.Runtime.InputQueue1.Dispatch() at System.ServiceModel.Channels.ReliableDuplexSessionChannel.ProcessDuplexMessage(WsrmMessageInfo info) at System.ServiceModel.Channels.ReliableDuplexSessionChannel.HandleReceiveComplete(IAsyncResult result) at System.ServiceModel.Channels.ReliableDuplexSessionChannel.OnReceiveCompletedStatic(IAsyncResult result) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.ServiceModel.Channels.ReliableChannelBinder1.InputAsyncResult1.OnInputComplete(IAsyncResult result) at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result) at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously) at System.Runtime.InputQueue1.AsyncQueueReader.Set(Item item) at System.Runtime.InputQueue1.Dispatch() at System.Runtime.IOThreadScheduler.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Runtime.Fx.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) InnerException: * System.NullReferenceException* Message: Object reference not set to an instance of an object. StackTrace: at System.Web.HttpApplication.ThreadContext.Enter(Boolean setImpersonationContext) at System.Web.HttpApplication.OnThreadEnterPrivate(Boolean setImpersonationContext) at System.Web.AspNetSynchronizationContext.CallCallbackPossiblyUnderLock(SendOrPostCallback callback, Object state) at System.Web.AspNetSynchronizationContext.CallCallback(SendOrPostCallback callback, Object state) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)

  Read the article

< Previous Page | 161 162 163 164 165 166 167 168 169 170 171 172  | Next Page >