Search Results

Search found 6636 results on 266 pages for 'jdbc driver'.

Page 166/266 | < Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >

• How do I get unity back?

  - by Siva

  I got the latest driver software for my old ATI Radeon 4600, and it had me restart. My screen was then just a big terminal! I could log in, but when I typed 'unity' into it as a command, it said something about DISPLAY not found; set it to :0 (zero). I don't know enough about Linux to deal with this. I am using a DSL live CD to ask this. I looked at similar questions suggested, even searched. If my question's a duplicate, I apologise, but I didn't understand what I saw there. T_T

  Read the article

• How can I correct the paper size (A4) for Canon i560 printer for 12.04?

  - by Peter

  How can I correct the paper size (A4) for Canon i560 printer for 12.04? Canon i560-Paper size error-with printer driver for Ubuntu 12.04 Precise Pangolin offers the same problem, but the answers are not very helpful/elegant to me. Especially the second is far too imprecise and the dimensions for A4 suggested there do not seem to be correct as they do not match with any other (and correctly working) A-Size dimensions. My i560.ppd has for A4 a length of [842] which is then the width for A3 throughout the ppd-file. A3 printouts are fine (So just the way it should be). A4 are not. Cannot figure out why.

  Read the article

• 13.04 gnome problem with drag and drop and text selection

  - by Laurent BERNABE

  I have an ubuntu 13.04 gnome 64 bits, but since a few days I am facing serious problem for doing simple drag an drop : in nautilus, in eclipse, in the browser. Also I can't manage to select text areas with the mouse (the only way I found is to double click on the first word, then expand selection with shift and arrows keys). I noticed that often, after having started a drag n drop, it is cancelled though I did not release the left mouse ! It is as if for each simple mouse clic : two was done ! My graphic card is an ati radeon hd 4330, and I had installed the default purposed driver. I don't know if I should give you results from some terminal commands, as I don't know which could be useful. Thanks in advance.

  Read the article

• "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this?

  - by fahadayaz

  I have recently purchased a Novatech nFinity N1410 laptop and am having problems with the wireless, which sudo lshw -C network tells me is Centrino Wireless-N 2230 and using the iwlwifi driver. The problem is that after the device has been suspended, I am not able to get the wireless working again without a restart. The network indicator states that the wireless disabled by hardware switch. Though Fn+F2 is meant to be the wireless switch, xev tells me that the system doesn't see it as anything at all when I press this hardware combination. Also, though the brightness up/down buttons work fine, the volume up/down buttons do not work either. What can I do to fix this? I am running Ubuntu 12.10 with all available updates installed.

  Read the article

• System freeze after opening Wi-Fi menu can boot into the machine and use Internet in recovery mode

  - by Michael

  So right now sitting in front of my Alienware area 51 desktop. It has a Broadcom Netlink BCM 5784M gigabit ethernet PCI E card. Most of the time able to get through the login screen and to the main screen if I click on the wireless settings on the top right-hand corner the system immediately freezes the cursor does not move at all keyboards are unresponsive. I was doing some quick Google searching and I found a suggestion to boot into recovery mode I did this and did a apt-get Distribution update which ran successfully installed then I rebooted into the regular system same thing I'm pretty sure it's the network card because even if I don't click the settings if a network related dialog opens such as disconnection or connection the system again immediately freezes. I'm running Ubuntu 13.04 ** update 1 ** Just was able to use my system for a little bit however when I went into Firefox and hit the web it again froze so obviously a driver problem but I'm not sure how to get drivers for Broadcom which apparently according to the description on stack-overflow is terrible Any ideas? Sorry for lack of punctuation on an ipad.

  Read the article

• Management Software in Java for Networked Bus Systems

  - by Geertjan

  Telemotive AG develops complex networked bus systems such as Ethernet, MOST, CAN, FlexRay, LIN and Bluetooth as well as in-house product developments in infotainment, entertainment, and telematics related to driver assistance, connectivity, diagnosis, and e-mobility. Devices such as those developed by Telemotive typically come with management software, so that the device can be configured. (Just like an internet router comes with management software too.) The blue AdmiraL is a development and analysis device for the APIX (Automotive Pixel Link) technology. Here is its management tool: The blue PiraT is an optimised multi-data logger, developed by Telemotive specifically for the automotive industry. With the blue PiraT the communication of bus systems and control units are monitored and relevant data can be recorded very precisely. And here is how the tool is managed: Both applications are created in Java and, as clearly indicated in many ways in the screenshots above, are based on the NetBeans Platform. More details can be found on the Telemotive site.

  Read the article

• Question about JPanel "transition" for Java Swing

  - by user16778

  I want to make like a sort of main menu (in GUI). When the user clicks the start button, the screen transition into another "screen" (JPanel). This image will make it easier to understand. http://i.imgur.com/Cfdry.png Currently, I have a MainMenu extends JPanel and that gets added into a driver class with a JFrame. I can't figure how to switch to another class like Game extends JPanel. So when the user clicks the start button in MainMenu, I want it to somehow hide itself and the Game to show itself. Thanks.

  Read the article

• Need to adjust touchpad edge scroll area

  - by MikeVB

  I have an Acer Aspire that I have dual booting XP and Ubuntu. On the Windows side, the driver allows you to set how close your finger has to be to the edge of the touchpad before it goes into scroll mode. In Ubuntu I don't have the option (at least in the GUI) to change the scroll area on the pad. Is there a conf file or other way to change this? I'm constantly getting into the scroll area during normal usage. I would like to leave it on without losing so much pad area to the scroll feature. Thanks a lot.

  Read the article

• How do I get the Netgear N150 USB wifi adapter working on 12.04?

  - by Jon

  Just installed latest version of ubuntu. I'm using a Netgear N150 Wireless USB Micro Adapter WNA1000M which keeps asking for network password over and over. I read elsewhere that I needed to install the latest driver for my chipset (RTL8188CUS) which I have and still no joy. If I run the steps listed in this thread while connected through ethernet, the wireless will connect just fine. If I disconnect the ethernet, the wifi will even continue to work, but after a restart or two I will lose connection. If I repeat the steps listed in the aforementioned thread, it will not re-connect wifi unless I run those steps while connected to ethernet.......so strange...

  Read the article

• Has the Ubuntu heating problem for Sony Vaio users been solved?

  - by nischayn22

  I use Sony Vaio VPCEA23en with graphics card ATI Radeon HD 5145 and have been using Ubuntu 11.10 and recently upgraded to 12.04 beta, however the problem of overheating (60-70) still persists. I have installed the graphics driver properly. Are there some features of Ubuntu that cause this problem? I would have no problem uninstalling them; Or will using a lighter version of Ubuntu (lubuntu) solve this problem? Right now I am using Win7 and would like to switch to Ubuntu ASAP.

  Read the article

• New CAM Editor v2.3 with Open-XDX for Open Data APIs

  - by drrwebber

  Creating actual working XML exchanges, loading data from data stores, generating XML, testing, integrating with web services and then deployment delivery takes a lot of coding and effort. Then writing the documentation, models, schema and doing naming and design rule (NDR) checks and packaging all this together (such as for NIEM IEPD use). What if there was a tool that helped you do all that easily and simply? Welcome to the new Open-XDX and the CAM Editor! Open-XDX uses code-free techniques in combination with CAM templates and visual drag and drop to rapidly design your XML exchange. Then Open-XDX will automatically generate all the SQL for you, read the database data, generate and populate the valid output XML, and filter with parameters. To complete the processing solution Open-XDX works with web services and JDBC database connections as a callable module that can be deployed plug and play with your middleware stack, all with just a few lines of Java code (about 5 actually). You can build either Query/Response or Publish/Subscribe services from existing data stores to XML literally in minutes. To see a demonstration of using Open-XDX, a MySQL data store and integrating with Oracle Web Logic server please see this short few minutes video - http://youtube.com/user/TheCameditor There is also a Quick Guide available that provides more technical insights along with a sample pack download of templates and SQL that you can try for yourself. Head on over to our project resource site to learn more, download the latest CAM Editor and see links to all the resources and materials. We look forward to seeing how the developer community is able to jump start information sharing initiatives using this new innovative approach.

  Read the article

• Ubuntu 12.10 live-usb won't boot

  - by user109175

  I own an Aleutia "Tango" low power PC. It uses a Intel Atom CPU N2800 @1.86GHz processor. I know there are Linux issues with the "Cedar Trail" graphics on this hardware but I can happily run Ubuntu 12.04 using the VESA graphics driver. I wanted to try out Ubuntu 12.10 so I created a live USB under 12.04 but I am unable to get this to boot. It gets as far as the Grub screen but after that the monitor shuts down. I have tried the F6 "nomodeset" option but that doesn't make any difference. Does anyone have any knowledge of this problem? Thanks in advance.

  Read the article

• Wireless xbox360 pad connected with xboxdrv doesn't show in jstest

  - by Kyle Letham

  So Lubuntu 13.04, 3.4.0. I'm trying to use my wireless xbox controller. I've installed xboxdrv. I have to run it with sudo, or I get USBController::USBController(): libusb_open() failed: LIBUSB_ERROR_ACCESS. If I connect the adapter, run the program, and then press the button on the gamepad to connect it, it never really connects - just flashes like it's searching. If I reboot, leaving the controller searching, and run the command again while it's searching after I boot up, the controller connects (the light becomes solid in one corner). Using pkill xboxdrv and then relaunching it doesn't work. Regardless, no matter what I do, the gamepad never shows up in jstest-gtk. sudo xboxdrv --debug gives me: Controller: Microsoft Xbox 360 Wireless Controller (PC) Vendor/Product: 045e:0719 USB Path: 002:005 Wireless Port: 0 Controller Type: Xbox360 (wireless) [DEBUG] XboxdrvMain::run(): creating UInput [DEBUG] XboxdrvMain::run(): creating ControllerSlotConfig [DEBUG] UInput::create_uinput_device(): create device: 65534 [DEBUG] LinuxUinput::LinuxUinput(): Xbox Gamepad (userspace driver) 0:0 Any ideas?

  Read the article

• Lubuntu 13.04 Resolution Issue du to ppa makson96

  - by Choupa

  I've installed Lubuntu 13.04 on my notebook. (It's the first time I use Lubuntu) I had graphical issue, apparently due to the graphic driver (ATI Radeon Xpress 1200) I followed this procedure to correct my problem : sudo add-apt-repository ppa:makson96 sudo apt-get update sudo apt-get upgrade sudo apt-get install fglrx-legacy My graphical issue has been corrected but now it shows a low resolution (1024*768) and I can't change it. the xrandr result : xrandr: failed to get size of gamma output default Screen 0: minimum 1024x768, current 1027x768, maximum 1024x768 default connected 1024x768+0+0 0mmx0mm 1024x768 0.0* I've already read this topic but I don't really understand how things work there. I'd really appreciate your help ! Many thanks !

  Read the article

• Switching between Discrete and Integrated GPUs

  - by void-pointer

  Hello everyone, I develop CUDA applications on my Alienware M17x portable back-breaker, which has two discrete GTX 285M GPUs and one integrated GeForce 9400M GPU. I can currently switch between them using NVIDIA's software, but I would like the ability to do so within my applications for purposes of benchmarking and general convenience. Apparently this requires the "NDA version" of NVIDIA's Driver API, which I know not how to obtain. Would using this API be the only way to accomplish what I seek, and if so, how would I obtain it? A solution using Windows APIs would also be acceptable, though less preferable to one which would leverage a cross-platform API. I have created a similar thread concerning the matter on NVIDIA's forum, which is down at the time of this writing. Thanks for reading my question; it is much appreciated!

  Read the article

• Is it possible to get dragging working on a Macbook multi-touch touch pad?

  - by lhahne

  I have a Macbook 5,1. That is to say that it is the only 13 inch aluminium Macbook as the later revisions were renamed Macbook Pro. Two-finger scrolling seems to work fine but dragging doesn't work. In OsX this works so that you point an object, click and keep your finger pressed on the touch pad while slide another finger to move the cursor. This causes weird and undefined behavior in Ubuntu as it seems the driver doesn't recognize this as dragging. Any ideas?

  Read the article

• Gnome-shell video freeze

  - by josephsmendoza

  So i have a 14.04 Ubuntu Gnome Live USB on my 16GB USB 3.0. It runs fine except sometimes it the screen will freeze, but I know stuff is still happening cause I can hear media playing. I did a little digging and i'm still not sure why, can someone help? Sorry if i don't provide enough details. ubuntu-gnome@ubuntu-gnome:~$ lspci -nnk | grep -iA2 VGA 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400}[10de:0867] (rev b1) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Kernel driver in use: nouveau

  Read the article

• Cursor seems to freeze in the first attempt to type - Unity 3D, 12.04

  - by Denis

  It happens in the first attempt of typing, no matter is after the startup, or 5 minutes later, or then after. The cursor (or maybe it's the system) seems to freeze, no matter the application I use, taking up 4 to 5 sec to appear what is typed. Subsequently, everything is normal, using another applications. @Anwar Shah suggested it could be a daemon waiting to run before the lauching of the first application. Turning off Zeitgest didn't help. It occurs only with Unity-3d. Tested with Unity-2d, everything is fine. Tried to change some Compiz settings, nothing worked, although not tested with every single parameter. Also I deactivated Ati proprietary driver, no effect. My system: AMD E350 1.6Gh, 2G-Ram, ATI graphics - Ubuntu 12.04, 64bits. Is that what I should expect, or can be fixed or improved? Thanks.

  Read the article

• How do I get a D-Link DWL-G520 working?

  - by human33

  I have Ubuntu 12.04 on an older desktop PC, and I am finding it much harder to connect to a wifi connection than it should be. I have an iPhone with which I want to tether to it with Mifi 4.0, but I need to install ipheth which I can't do without internet on that computer. I am typing from my other windows pc with which i can download and move hings with thumb drives, but haven't gotten keryx to work. I also found a D-Link DWL-G520 HIGH SPEED 2.4GHZ (802.11G) WIRELESS 108MBPS PCI ADAPTER which I installed, but can't find a driver to put on a flashdrive to use it. If anybody has any ideas, they are appreciated. I am a noob, and I don't want to have to move the comp. downstairs to plug into the modem. PS: I also have a netgear USB network adapter, which doesn't work with my Ubuntu.

  Read the article

• brother MFC-J435W wireless scanning issue

  - by ogreen32

  Thanks for taking the time to read this. I have a brother MFC-J435W and I was able to get the printer set up for wireless printing, but it is not allowing me to scan wirelessly. It gives me the message to "check connection". I'll tell you what I've done so far and maybe someone can help me out. I've installed the scanner driver and scan tool I installed Xsane (to see if it would allow the scanner to communicate with the computer and that didn't help). I've tried restarting the computer. After those things I am now at a loss as to where to go from here. Any help would be great. Thanks. I've also searched for this question in the Brother FAQ as well as on here and I haven't found an answer. Thanks again.

  Read the article

• "Unknown Filesystem" error without CDROM

  - by Utku Tarhan

  I've got a problem with Ubuntu 12.04 LTS. At first I ran mount command on terminal. Then I restarted my computer. After that, when my computer opened there is writing this: error: unknown filesystem grub rescue I searched commands and I found ls command. I tried it and I got this: (hd0) (hd0,msdos5) (hd0,msdos1) My computer's DVD driver is broken and I tried to boot Ubuntu on USB but it doesn't worked. My computer's specs: PC Name: HP Presario F780ET Processor: AMD Turion 64 X2 Mobile Technology TL-60 Ram: 2GB Ubuntu Version: 12.04 LTS

  Read the article

• Kernel Panic Fatal Machine Check

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-(

  Read the article

• Wake up from sleep with GPIO (I2C)

  - by spambas

  My situation: Ubuntu 10.10 running on an atom driven main board the main board has a GPIO chip integrated (F75111 by Fintek). They communicate through I2C(SMBus). We have a driver running that works, we can send outputs and read inputs. Great! We would like to use the I/O interface to suspend (sleep) and wake up again. Sleep is no problem. On an incoming input: run s2both. Ubuntu goes to sleep and prepares a hibernate state, so when the power-cord is unplugged by accident, it will wake from hibernate. But the big question: how to wake on an input if the OS is already sleeping! You can wake from a lot of devices (lan, usb, ring, etc) but I can't find out how to wake from a I2C card. PLEASE HELP!

  Read the article

• Precise pangolin won't install

  - by Percival Júnior

  I've been an ubuntu user since first release but now I can't install precise beta 2 32bits and neither 64. Tried so many times, already download nighly isos but nothing. 11.10 installs smoothly (usint it). My hardware is a samsung notebook 4gb of ram.., 25 gb partition for precise. I'm gonna tell you what actually happens... I boot from usb driver and I choose my language (portuguese - brazilian) choose partition till there everything is normal. But when I Put my name user and password and give NEXT the screen to choose my region appears a click Next again and at this point I get STUCK !!! NOTHING HAPPENS. I've waited for hours and all the system freezes. When I try to reboot,, my grub is gone. Thanks for the help.

  Read the article

• Trying to run 32bit windows game in wine on 64bit 12.04

  - by georgelappies

  I am trying to run Icewind dale2 from GOG.com in wine on ubuntu 12.04 64bit. I am using the AMD ATI binary blob display driver. Running the file command on /usr/lib32/fglrx/libGL.so.1.2 gives: george@devbox:/usr/lib32/fglrx$ file libGL.so.1.2 libGL.so.1.2: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), dynamically linked, stripped george@devbox:/usr/lib32/fglrx$ So I definetly have 32bit opengl. I am using latest Playonlinux and tried this on wine 1.4 and 1.5... How can I force wine to use my opengl library?

  Read the article

< Previous Page | 162 163 164 165 166 167 168 169 170 171 172 173  | Next Page >