Search Results

Search found 12784 results on 512 pages for 'little jeans'.

Page 167/512 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Error adding 4tb LUN (Raw Device Mapping) to ESX4 VM

  - by Tom Gardiner

  Hi guys, I'm trying to map an existing 4tb LUN from a Fibre Channel SAN, through to a VM in my ESX4 environment. It keeps telling me that the VMDK file size exceeds the the maximum size supported by the datastore. I've tried in Physical compatibility mode, and also both Virtual styles. I'm a little confused by this as we had the same LUN mapped through to another VM when we were running ESX3.5... I've also noticed that some of my other RAW mappings are generating extremely large VMDK files on the ESX servers. Does anyone know if this change in behaviour is intentional? And if so why? It doesn't seem to me that if the LUN is mapped directly to the VM that it's size should be relevant. We're running 4.0.0 build 236512, and 4.0.0 build 219382 and I've not had any success on either. Any insight or advice would be much appreciated! TG

  Read the article

• Unknown MySQL server host - connection problem

  - by Zukas

  I am new to databases and I have been asked to look at a few tables and see how many records they have and some other information. I cannot access phpMyAdmin through cPanel, which is how I've always done it on my own server. I decided to download MySQL Workbench. I enter in all the information is asks: Hostname: mysite.startlogicmysql.com Port: 3306 Username: user. I press connect and get this Unknown MySQL server host 'mysite.startlogicmysql.com' (11004) Am I using the wrong hostname? I've seen a server name, a hostname in the server variables list which is something like custsql.eigbox.net and the server itself is custsql.eigbox.net In both cases the custsql is a little different than what I posted. I am not sure which one to use. If there is anything else anyone needs to know I can tell you. Tanks.

  Read the article

• Understanding this error: apr_socket_recv: Connection reset by peer (104)

  - by matthewsteiner

  So, if I do some benchmarking with apache benchmark (ab), and I use large numbers of requests. Then sometimes in the middle of a test I get this error. I don't even know what it means. So how can I fix it? Or is it just something that will happen if the server gets too many hits anyway? The problem is, if I run 10,000 hits, it'll all run perfectly. If I run it again, it'll get to 4000 and get the error: apr_socket_recv: Connection reset by peer (104) A little about my setup: I have nginx taking static requests and processing dynamic ones to apache. The file in question is served from cache by nginx, so I guess it's probably got to do with how nginx is handling the requests? Ideas?

  Read the article

• windows 7 file explorer preview window and password protected word docs

  - by Carbonara

  When using the windows 7 explorer with the preview pane open you get a little preview of a file when you click on it. This includes Word and Excel spreadsheets etc. My problem is if the Word doc is password protected clicking on it in explorer automatically asks for the password to display its preview. It does this if you single or double clicking on it. You then get an empty Word instance running (which allows it to display the preview) and another instance of Word with your actual file and you're asked for the password twice in total. This is annoying and untidy. Is there a way of stopping the preview pane from wanting to display password protected documents and thus not asking for the password to display a preview?

  Read the article

• File system loop detected in /var/named/chroot/var/named/

  - by Iko

  The problem start with a message No space left on device. After investigating a little (with google's help) I found : find: File system loop detected; /var/named/chroot/var/named' is part of the same file system loop as/var/named'. What I don't know is what to do next. I found this on centos.org : and see if the inode numbers are the same (they shouldn't be). If they are then you need to remove the /var/named/chroot/var/named/ hard link and recreate it as a directory the inode number are the same but I don't know exactly which folder to delete and what to do next thank you for any help Linux xxxxx.onlinehome-server.info 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• New CAT5 cable run is unstable - bad jacks? Bad cable?

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• What does "Use mandatory profiles on the RD Session Host server" do?

  - by Scott Chamberlain

  The description for "Use mandatory profiles on the RD Session Host server" is a little ambiguous: This policy setting allows you to specify whether Remote Desktop Services uses a mandatory profile for all users connecting remotely to the RD Session Host server. If you enable this policy setting, Remote Desktop Services uses the path specified in the Set path for Remote Desktop Services Roaming User Profile policy setting as the root folder for the mandatory user profile. All users connecting remotely to the RD Session Host server use the same user profile. If you disable or do not configure this policy setting, mandatory user profiles are not used by users connecting remotely to the RD Session Host server. I have a situation where only some users need to use mandatory profiles for logging in to a Remote Desktop Session Host. If I have some users with ntuser.dat and some users ntuser.man in their roaming profile what will RD Session Host do To a user who has ntuser.man in their roaming profile and has the setting set to Disabled? To a user who has ntuser.dat in their roaming profile and has the setting set to Enabled?

  Read the article

• Serial number not found, copy of Windows not genuine

  - by sara

  I have an HP-G71-340US notebook that I purchased 11/29/09. When I power it up, a black screen comes on that shows "serial number not found" and it also says that my copy of Windows 7 Home Basic is not genuine – but my computer came with Windows 7 Home Premium. In BIOS, my serial number is not shown either and I did pull out the little battery to reset it which allowed me to bypass the suddenly new locked BIOS that needed a password to enter. I'm sure this is a masterpiece created by my 6 or 9 yr old child while trying to play on my laptop. Can I fix these two problems?

  Read the article

• CentOS Vulnerabilities - Exploits/Payloads

  - by Joao Heleno

  Greetings. I'm doing an academic work where I have to find vulnerabilities in CentOS and show how to take advantage of those same vulnerabilities. I'm no hacker and I'm finding this task to be of great difficulty, that is, I see all the security alerts and their descriptions but no explanation of how to take advantage. Maybe I'm being a little naive but all I want to know is if there is any tool I can use to show that CentOS 5.0 vulnerability XPTO exists and to show it "working". If possible something like CVE-2007-0001 exploit tool, CVE-2007-0002 payload and so on. Thanks.

  Read the article

• Using awstats with a round-robin DNS configuration

  - by Shaun

  I have a website with multiple web servers whose access is controlled via a round-robin DNS. We currently use Google Analytics for site traffic monitoring but were looking to move to awstats due to concerns of inaccuracy with Google Analytics and using third-party trackers in general. I have a little experience with awstats and I know it gets its information from parsing server logs. How would this work when you have multiple web servers logging independently to separate locations? Is this supported with awstats? Is there an alternative I could use to track traffic activity directly on my servers?

  Read the article

• Hard Disk Space Changes

  - by Write.

  I am currently running on Windows 7 x64, and have observe that my hard disk space is acting a little weird. Currently, my harddisk has 3 partitions, C:, D:, E:. Previously, before I delete a huge folder (30gb of data) from my D: drive, my C: drive has about 1gb left, while my E: drive has about 5 gb left. After deleting the 30gb of data (from D: drive), my space in D: drive has been recovered (but not sure if it's fully recovered), my C: drive which only had about 1gb left increased to 3. While my E: drive which had 5gb left dropped to 1. I was wondering if it has something to do with the fragmentations and whatsoever I always hear about in harddisk. Has anyone encountered similar issues or have an explanation to why it could be happening?

  Read the article

• deploying a Python application from a PHP developer

  - by user1218776

  I'm a little confused on the deployment process for Python. Let's say you create a brand new project with virtualenv source bin/activate pip install a few libraries write a simple hello world app pip freeze the dependencies When I deploy this code into a machine, do I need first make sure the machine is sourced before installing dependencies? I don't mean to sound like a total noob but in the PHP world, I don't have to worry about this because it's already part of the project. All the dependencies are registered with the autoloader in place. The steps would be: rsync the files (or any other method) source bin/activate pip install the dependencies from the pip freeze output file It feels awkward, or just wrong and very error prone. What are the correct steps to make? I've searched around but it seems many tutorials/articles make an assumption that anyone reading the article has past python experience (imo).

  Read the article

• Apple XRaid questions

  - by luckytaxi

  I inherited an environment with a couple of apple xraid san. 1 - I have a 14 drive setup that's split into 5 LUNs on EACH side. The SAN goes into a fibre switch along w/ the servers that are attached to it. LUN masking is enabled on the SAN and as far as I know, there aren't any zoning on the fibre switch. Question, I have a server that's assigned two LUNs, one from each side of the controller. For some reason, it only sees one LUN (from the upper controller) and it doesn't see the one from the lower controller. The controller seems to be working fine as I have other servers attached to LUNs on the lower controller. 2 - I see a little "disclaimer" saying that any changes to the xraid will result in a reboot. So, if I add/remove hosts, this thing is going to reboot?!?!?!

  Read the article

• Messages don't always appear in Mail.app

  - by MikeHoss

  My wife and I share a Mac and use different accounts. We both use Apple's standard Mail.app. We can also get to our email accounts via SquirrelMail that our webhost provides. Both SquirrelMail and Mail.app are connecting via IMAP. My wife was the first to notice that not all messages were getting to the Mail.app. She would check the Mac (our main machine) and then a little while later check mail from another machine via SquirrelMail and see messages there that should have been on the Mac. She would go back and those messages would never show up. Lately, I have been seeing the same thing, though less often. I can't reproduce it, or just look at a message to see if they haven't been moved over. I've looked in Junk, etc. and the Mac simply never sees those messages via IMAP. Does anyone have a guess to something I could poke around at?

  Read the article

• Install mSATA SSD on Lenovo A720

  - by Chuck Savage

  I apologize in advance for using tag names in title, it seemed it would be clearer this way I just purchased a Lenovo A720 and they have a more expensive version than what I purchased that has a SSD. I figured to buy the SSD separately and save myself a little money and install it myself. I've taken off the base cover but there doesn't seem to be a place to put the SSD. Here are some pictures - any suggestions? There are places on the web where people have said they've done the installation but not how or with pictures. Edit: On Lenovo forums, someone had done it but doesn't say how - I've replied asking how. Added two more pictures per request:

  Read the article

• What's wrong with Lotus Notes / Lotus Domino?

  - by user20242

  I have a client who is using Lotus Domino for their web application/server platform. The client has two "web developers" who are more comfortable with Lotus Domino than more mainstream tools and technologies and are not enthusiastic about making a switch. I have been asked to provide an assessment of why it may be prudent to migrate to a different web application platform. I would be particularly interested in understanding deficiencies related to the platform as I have very little knowledge of Domino but am very familiar with other platforms. In addition to the fact that Apache has over 70% of web server market, IIS over 21%, and Lotus almost 0%, what other reasons would you give for moving away from this platform?

  Read the article

• ssh-agent key timeout with screen or tmux on bastion host

  - by Jericon

  Normally I have ssh-agent running, I ssh to my bastion host then open a tmux session and connect to other boxes through that. Key forwarding works for any sessions that I open from that point forward. If I resume my tmux session after closing terminal, sleeping my laptop, whatever, my key forwarding on my bastion sessions still work, as does forwarding on any new sessions. Existing ones don't work, though. I have a little thing in my bashrc that keeps key forwarding working when I resume tmux, but I am having trouble figuring out how to get it to keep working for sessions open within tmux. For example, I have bastion01, dbhost01, dbhost02, webhost01, and webhost02. If I open a connection to bastion01, start tmux there, and then connect to dbhost01 and webhost01 forwarding works. If I close that connection, reconnect and attach my existing tmux session, then add connections to dbhost02 and webhost02, key forwarding works on the 02 boxes, but does not on the 01. Please help!

  Read the article

• Mutli-processor workstation as a workstation/server

  - by posdef

  I work in a research institute and a number of programs we use are computationally intensive (I actually wrote one of them). Right now we have one computer that is dedicated for one of these programs (with local accounts only, as in users physically sitting in front of that pc) and the other programs are run on individual workstations assigned to people. I have been looking around to common brands such as Dell and HP, for a some sort of a small/medium scale server, which can be used as a workhorse by sending tasks remotely. It appears as if there is nothing in between workstations with one 6-core processor and a bunch of extras (like fancy graphics etc) and rack mount servers with ridiculous amount of RAM and HDD expansion capabilities but still relatively little number of processors/cores. I wonder if what I am looking for is such a small niche product? Are there other solutions that I might not be aware of? Does anyone know of a multi proc- multi-core workstation/server that is still within the reasonable

  Read the article

• Why would only the cpu fan not spin and no video displayed?

  - by Patrick

  I just built a new computer and when I first powered it on I got a continuous beeping which according to the manual means a power failure. After moving the voltage switch to the left a little I was able to get the beeping to stop. Even after the stopping though the CPU fan doesn't spin, and there is no display on the monitor. All the other fans and lights come on in the computer though, the DVD drive is working and ejects the tray, and the hard drive sounds like it spins up. Has anyone seen this before and know what is wrong or what has failed?

  Read the article

• where to look for computer technician jobs

  - by Kareem

  Hi I am currently studying for the A+ certification, I plan to have it by the end of this month and I plan to go for farther education. I’ve built two high end computers by myself for a friend and family member. Install OS and everything. I’m looking in to finding either a computer assembly or computer technician job . Where is the best place to look for one? I’ve looked in to best buy but I find their geek squad to be a little bit shady. Where is a good place to look for a full time entry level computer technician job just starting out in Tampa, FL?

  Read the article

• setting visual bell to flash in iTerm

  - by blackwing

  Hi, I am using iTerm on OSX (leopard) to ssh to a linux machine. I run screen on the dev machine to save my work between sessions. I am not a big fan of audio bell and I don't like screen's default 'Wuff Wuff' bell (or any other little message shown at bottom of the page). What I like though is to have flash (foreground and blackground colors swapped for a fraction of a second) as my visual bell. I used to use PuTTY and it is as simple as ticking a checkbox but I can't find such an option in iTerm. My question is how can I set my visual bell to flash? The ideal answer would work with iTerm on local computer, iTerm sshed to a linux server, and iTerm sshed to a linux server and ran screen.

  Read the article

• Maxi/minimizing active applications in system tray

  - by ldigas

  This is a little hard to explain, so I'll try with an examle ... I got a lot of always active applications that have the feature which enables them to be minimized to system tray. Double click / or single click to restore them, and down there again they go. So I spend a lot of time double/single clicking. Is it possible, and how would one go about it, to define an for example AHK shortcut for minimizing/restoring back again those applications (where every app. would have its own shortcut, of course) ? Of course, all other approaches are equally welcomed.

  Read the article

• Virtual Box fails my OSes :(

  - by Kingston Town

  I have a little problem with Virtual Box latest version in which i have installed Mint (also latest version).During creation of a new vdi partition I chose settings as default, that is, I don't create any tiny partitions myself. The installation works. But later while the new OS is running (not in Live mode) I try installing/updating new software available, the system automatically fails, it reports an error of DISKFULL, I close the message box then power off my system. Later on I can't boot it up again anymore. It hangs with a black screen and the PAUSE status. I have no idea why. I have installed 2 OSes and both fail at the same error. I doubt something is not right about the current version of VBox. Thank you . My host OS is Windows7 and my Clients are Mint and CentOS

  Read the article

• ffmpeg trimming video

  - by Dori

  I am having a problem using ffmpeg which is driving me a little mad, so I hope someone can help me out. I have a 13 MPEG-4 .mp4 video of which I am attempting to trim the first two seconds off using ffmpeg and display in an Android app. From the numerous tuts online i am excecuting the following on the command line ffmpeg -i untrimmed_video.mp4 -vcodec copy -ss 2 trimmed_video.mp4 with no luck as it outputs a video of 4-seconds length (i have no idea where its getting 4 from), if i change this to 3 i still get a 4 second video, if i set it to 10 i get unplayable output. if i move the -ss arg to ffmpeg -vcodec copy -i untrimmed_video.mp4 -ss 2 trimmed_video.mp4 i get output the same length as the input, same as if i move to the end. I have tried lots of variations as orders and nothing seems to work, is this a bug, am i doing something wrong?! please help!!!

  Read the article

• How to get Windows 7 logon wallpaper to tile to other monitors?

  - by Oskar Duveborn

  In 2000/XP/Vista it was easy to set a wallpaper for the logon screen, either manually through tools like Logonstudio or simple registry changes by hand on prepared installation images or through custom group policies. In Windows 7 all this works as usual, but the secondary (or any additional) monitor is just black. The mouse pointer is visible on it but no matter what settings I can't get the wallpaper to tile (or stretch or fill or whatever) over onto it. This makes it hard to OEM/company brand the installation for multi-monitor users. More annoying is the fact that it looks officially supported to brand the logon wallpaper in Windows 7 - as it's made extremely easy... apart from this little catch.

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >