Search Results

Search found 6033 results on 242 pages for 'partition magic'.

Page 167/242 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Need help diagnosing cause of BSOD

  - by n00neimp0rtant

  I've got a Windows 7 PC here that was getting very frequent BSODs. The error codes were variant (IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT_IN_NONPAGED_AREA, ATTEMPTED_WRITE_TO_READONLY_MEMORY), and it was impossible to use the computer for longer than an hour without getting one. I backed it all up and reinstalled Windows completely, thinking that it was a corrupt driver issue. Unfortunately, I'm still getting the BSODs with the same error messages on this fresh installation. This tells me that it must be some faulty piece of hardware, but I'm not sure what it would be. I ran Memtest+ on the machine, but did not get any errors after 2 passes. I also ran a few built-in recovery mode scans from the HP recovery partition. I need some ideas on how to test the rest of the hardware to solve this issue.

  Read the article

• Wrapping \NewEnviron into \newenvironment fails

  - by o_O Tync

  Hello! I am trying to wrap an environment created with \NewEnviron (package 'environ') into an old good \newenvironment: \NewEnviron{test}{aaa(\BODY)bbb} \newenvironment{wrapper}{\begin{test}}{\end{test}} \begin{wrapper} debug me \end{wrapper} However, this gives me a strange error: LaTeX Error: \begin{test} on input line 15 ended by \end{wrapper}. LaTeX Error: \begin{wrapper} on input line 15 ended by \end{document}. If I replace \NewEnviron{test}{aaa(\BODY)bbb} with \newenvironment{test}{aaa(}{)bbb} — everything works as expected! It seems like \NewEnviron fails to find its end for some reason. I'm trying to do some magic with 'floatfig' wrapped into a \colorbox so I need a way to convert \colorbox to an environment and wrap it into another one. I can define a new command but it's not a very good idea. Thanks in advance!

  Read the article

• How to locate chrome bookmarks in linux

  - by xenon

  I upgraded from Karmic Koala to Lucid Lynx beta, was working fine for a while (was even rebooting). But, after some time, it is not booting and i cant find a solution. I have tried installing the grub again, doesn't help. Well, the problem is all my settings, bookmarks and passwords are blocked in that partition. I cant find where the Chrome stores bookmarks in Ubuntu. Can you help me either getting my system rebooted or getting the bookmarks ? Thanks. p.s. I am currently on liveusb.

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• XEN disk mapping problem under opensolaris

  - by Louis

  I have a system with two harddisks, i wanted to use the simplicity of ZFS for my file server and i also need to run a linux. I choosed XEN virtualization for that, supported on both system. My GRUB is well configured and i can boot both system. I would like is to run both system with solaris as a dom0 and the debian installed on the 2nd HD as a virtual machine. My problem is that i want to use the partitions of my 1st harddisk (sda1 under linux) and it does not work. I didn't find my use case on the web- Here is my Opensolaris device name of this partition : /dev/rdsk/c7d0p1 But when i use : disk = [ 'phy:rdsk/c7d0p1,sda1,w' ] as a disk mapping in my XEN configuration file i have the error : Error: Device 2049 (vbd) could not be connected. error: "rdsk/c7d0p1" is not a valid block device. I am "lost".

  Read the article

• Start exe even with missing dependency dlls?

  - by k3b

  In Dotnet2.0 and later a program refuses to start if one of its dependent (static referenced) dlls are missing. With Dotnet1.1 and 1.0 the program started but crashed later when trying to use functionality of the missing assembly. I wonder if there is something like a compiler switch , configuration option or a dotnet [attribute] to allow me to start the app when certain dlls are missing. Is it possible without moidfying the sourcecode (execpt by applying some Attriutes)? I don't want to manualy load assemblies by programcode or use IOC-Framworks. Update: With "static referenced dlls" i mean the opposite of dynamicly loading a dll in my own programcode using reflection and Assembly.Loadxxxx(). Update 2010-12-25: This scenario happens for example if you want to use Log4net with Dotnet4 clientprofile together with a WinForms-Aplication: Log4net requires System.Web.dll that is not in Dotnet4-Clientprofile. You must install dotnet4-web-support to use the winforms-aplication that is compiled against log4net unless there is some magic Compiler-switch/Attribute/Configuration that i am still looking for.

  Read the article

• VB.net 'cross-referencing' tables.

  - by Lee

  Hello, I have a DataGridView that is being filled with data from a table. Inside this table is a column called 'group' that has the ID of an individual group in another table. What I would like to do, is when the DataGridView is filled, instead of showing the ID contained in 'group', I'd like it to display the name of the group. Is there some type of VB.net 'magic' that can do this, or do I need to cross-reference the data myself? Here is a breakdown of what the 2 tables look like: table1 id group (this holds the value of column id in table 2) weight last_update table2 id description (this is what I would like to be displayed in the DGV.) take care, lee BTW - I am using Visual Studios Express.

  Read the article

• What files should be excluded from a complete Windows backup?

  - by tro

  I'm starting to use CrashPlan to backup my Win 7 PC. I've got it writing to my external HD (for quick local restores) and to CrashPlan Central (for offsite storage). I'd like to backup my entire C:\ drive (the only partition) in a way that: Preserves all of my installed software and configuration, but Avoids backing up log files and other ephemeral / temporary files that are regenerated during normal operation of the OS. Which files and/or directories should I be excluding from backups? I'd like to make this a community wiki, so that we could all contribute towards a definitive list. Here's a list of regular expressions identifying the directories and files that CrashPlan excludes on Windows by default listed at http://support.crashplan.com/doku.php/articles/admin_excludes: .*/(?:42|\d{8,})/(?:cp|~).* (?i).*/CrashPlan.*/(?:cache|log|conf|manifest|upgrade)/.* .*\.part .*/iPhoto Library/iPod Photo Cache/.* .*\.cprestoretmp.* *\.rbf :/Config\\.Msi.* .*/Google/Chrome/.*cache.* .*/Mozilla/Firefox/.*cache.* .*\$RECYCLE\.BIN/.* .*/System Volume Information/.* .*/RECYCLER/.* .*/I386.* .*/pagefile.sys .*/MSOCache.* .*UsrClass\.dat\.LOG .*UsrClass\.dat .*/Temporary Internet Files/.* (?i).*/ntuser.dat.* .*/Local Settings/Temp.* .*/AppData/Local/Temp.* .*/AppData/Temp.* .*/Windows/Temp.* (?i).*/Microsoft.*/Windows/.*\.log .*/Microsoft.*/Windows/Cookies.* .*/Microsoft.*/RecoveryStore.* (?i).:/Config\\.Msi.* (?i).*\\.rbf .*/Windows/Installer.* Other excludes: .*\.(class|obj) .*/hiberfil.sys (?i).*\.tmp (?i).*/temp/ (?i).*/tmp/ .*Thumbs\.db .*/Local Settings/History/ .*/NetHood/ .*/PrintHood/ .*/Cookies/ .*/Recent/ .*/SendTo/

  Read the article

• Controller getting NULL value?

  - by RSolberg

  I'm trying to make a call to a controller via jQuery $.post, but the parameter for my controller method keeps getting a NULL value despite it appearing to be setup similar to other controller methods. CONTROLLER [AcceptVerbs(HttpVerbs.Post)] public ActionResult SearchWeatherLocations(string searchFor) { //Do Some Magic } GLOBAL.ASAX routes.MapRoute("SearchWeatherLocations", "Home/SearchWeatherLocations/{searchFor}", new { controller = "Home", action = "SearchWeatherLocations" }); jQuery Call From View <script type="text/javascript" language="javascript"> $(document).ready(function () { GetWeatherLocations("seat"); }); function GetWeatherLocations(sSearchFor) { var divToBeWorkedOn = '#locations'; var webMethod = '<%= Url.Action("SearchWeatherLocations", "Home") %>/'; var url = webMethod + sSearchFor; $.post(url, function (data) { $('#locations').children().remove(); for (var count in data) { $('#locations').append("<li>" + data[count].LocationName + "&nbsp;(" + data[count].LocationCode + ")</li>"); } }); } </script>

  Read the article

• Type-safe, generic, empty Collections with static generics

  - by Droo

  I return empty collections vs. null whenever possible. I switch between two methods for doing so using java.util.Collections: return Collections.EMPTY_LIST; return Collections.emptyList(); where emptyList() is supposed to be type-safe. But I recently discovered: return Collections.<ComplexObject> emptyList(); return Collections.<ComplexObject> singletonList(new ComplexObject()); etc. I see this method in Eclipse Package Explorer: <clinit> () : void but I don't see how this is done in the source code (1.5). How is this magic tomfoolerie happening!!

  Read the article

• How do boot sectors and multiple drives works?

  - by GiH

  I don't fully understand the concept of a boot sector, I was hoping someone could clear this up for me. If you have two hard drives, with an OS installed on each, does each drive have its own boot sector? Does each drive need an MBR partition? I've got Linux and Windows on two separate drives. I've had issues when installing Linux and grub, and now I've finally decided to use the Windows bootloader to start up. Would Windows have gotten rid of grub when i used /fixmbr or does it stay there on the boot sector of the other drive?

  Read the article

• Windows 7 Image Restore with a smaller hard drive

  - by Vaccano

  I have a 500 GB drive that I have made a system image of. I would like to move that to a 250 GB drive (because it is a Solid State drive). I have made a Windows 7 Backup Image of my 500 GB drive. I am currently only using 163 GB of that drive. Can I just restore that to the target drive or will the restore be expecting a 500 GB drive? If it is expecting it I can shrink my partition to less that 250 and backup again. But I would rather not if that is not needed. Will the restore realize that it is not using all the space and just take what it needs?

  Read the article

• Fastest booting desktop linux distro? [closed]

  - by Kim

  I'm currently running Ubuntu 9.04 on my laptop and I'm very happy with it. But boot times aren't great... So I'd like to have a second distribution on my hard disc that I can boot to quickly check my email and stuff like that. It really only needs to run firefox and a terminal. Ext4 support would be a plus since my Ubuntu partition is ext4. In the next couple of hours I will try xPUD and DSL. Any other suggestions? EDIT: Tried xpud, hangs on boot.

  Read the article

• What are the best options for a root filesystem hosted on SSD under Linux

  - by stsquad

  I'm working on an embedded system which is going to be booting and hosting it's rootfs on an SSD disk. We are currently looking at using Intel X-18M SSDs. The file system structure will have a fairly static /usr section (modulo software upgrades) and an active /var and /var/log for maintaining state and logging. Given the wear-levelling done by the underlying flash does having separate partitions help or hinder? As modern SSDs appear as straight block devices and hide their mapping magic behind their firmware is there any point trying to optimise the choice of file-system that sits on-top of the SSD? Finally does enable SMART monitoring make any sense in this context or are their SSD specific ways of determining the underlying health of the storage hardware?

  Read the article

• safeboot and wubi

  - by G S

  Hi, Having read various posts it seems clear that installing Wubi on a machine which already has safeboot installed with disk encryption is a non-starter at the moment - nor is repartitioning the disk it would seem. However while the c: partion is encrypted - it has an NTFS formatted q: partition that is not encrypted and has about 4GB free - so I was wondering if there was any way to install WUBI using that partion. Obvisouly stil need a means of booting into it without stuffing my safeboot booting mechanism. I'm thinking that this should be possible as the safeboot booting mechanism will get me to the boot choice options and thereafter all references in the boot.ini entry for the wubi installtion should be to files on the non-encrypted NTFS partion and so it should be OK and not attempt any changes to my envrypted c: partion (other than adding the extra entry to boot.ini) ? any thoughts? ta

  Read the article

• Is there anyway to build a raid system without all drives?

  - by xenoterracide

  I'm building a raid1 (ok it will probably be a raid10,f2 but the difference with 2 drives... isn't much) system with 2 1TB drives. However, 1 of the drives I've ordered is bad so I'm RMA-ing it. I'm wondering if I could partition and install to the 1 drive and then rebuild the array when I get the second drive (after I test it of course) My initial investigation doesn't show me a way of creating the array without specifying all devices... and the device the second drive will be is one that has data that I will need to migrate (plus it's not big enough). Is it possible that I could create an array without specifying all devices? or specify false ones and reconfigure to the right ones later? Or some other method I'm not thinking of.

  Read the article

• BitNami LAMP stack on ubuntu

  - by Desmond Liang

  I just installed BitNami LAMP stack on ubuntu. When I visit localhost/127.0.0.1 Apache returns "403 Forbidden. You don't have permission to access / on this server." I try repointing Apache's home directory to another folder (same hard drive, same partition) that's set to 777 recursively. Still getting 403. And then I change the ownership of the directory to under my username and daemon group from root/root. Same error. Am I missing something here?

  Read the article

• T4MVC calling controller methods multiple times?

  - by Maslow

  I suspected there was some hidden magic somewhere that stopped what looks like actual method calls all over the place in T4MVC. Then I had a view fail to compile, and the stackTrace went into my actual method, not the generated code in T4MVC. <%=Ajax.ActionLink("Apply", "Apply", new RouteValueDictionary() { { "shortName", item.Shortname } }, new AjaxOptions() { UpdateTargetId = "masterstatus" })%> <%=Html.ActionLink("Apply",MVC.Alliance.Apply(item.Shortname),new AjaxOptions() { UpdateTargetId = "masterstatus" }) %> The second method threw an exception on compile because the method Apply in my controller has an [Authorize] attribute so that if someone that isn't logged on clicks this, they get redirected to login, then right back to this page. There they can click on apply again, this time being logged in. And yes I realize one is Ajax.ActionLink while the other is Html.ActionLink I did try them both with the T4MVC version. Is this a fluke or is it actually calling into the real methods and running my database calling code just to generate the views?

  Read the article

• Vista won't boot - just get black screen

  - by DisgruntledGoat

  When I boot into Windows Vista (Ultimate), I just get a black screen (with the mouse visible and working). If I run in safe mode, it seems to pause for a while when loading crcdisk.sys. A lot of research says it could be a problem with the hard drive, but I dual boot Ubuntu and that works fine and I can still see and use the Windows partition absolutely fine from Ubuntu. I tried using the "startup repair" option on the Vista install disk but it didn't detect any problems. I have run chkdsk several times, with this: chkdsk C: /f /r And also drive D (the recycle bin). The first two times it detected and fixed errors on the C drive but now it doesn't detect any errors. Is there anything else that could be causing this problem?

  Read the article

• How to uncompress a 9GB file in Windows FAT32

  - by Kashif

  I have a 2GB RAR file that contains a 9GB video file. I'm using a FAT32 file system. Now I want to unzip that file but after 4GB I get an error due to the FAT32 file size limit. Now I want to know that how I can extract that video? I know that one way is to convert my partition to NTFS but I don't want to follow that way. I've also tried 7-zip but that again gives error after 4GB. One other way is to split that file but I don't know how I can split a video file that is zipped. So any idea please? How can I get rid of this problem.

  Read the article

• Upgrading Windows 8 Consumer Preview to Release Preview

  - by user1407016

  I currently have my main hard drive split into two partitions. One being Windows 7 with about 600 GB of memory, the other Windows 8 Consumer Preview with about 50 GB. As you can guess it is set up for a dual boot. Today while looking up how to get the C# Facebook SDK for Metro apps I learned about the Release Preview being released. I was wondering: How do I go about getting rid of Windows 8 Consumer Preview and replacing it with the Release Preview? I know i can't just wipe it off my second partition because the dual boot uses Windows 8 to choose the operating system to boot.

  Read the article

• How to boot RHEL with no bash?

  - by nmelmun

  How can I boot a RHEL VM if I deleted /bin/bash? When trying to boot, I now get the following error: "INIT: Cannot execute "/etc/rc/d/rc.sysinit" The next thing I tried was to modify the kernel boot parameters by adding init=/bin/ksh at the end of the line, which gave me a functional shell. After this, in order to get write permissions, I remounted the root partition with: mount -o remount,rw / Then I tried to boot using ksh as the shell by tricking the system into thinking it's bash: ln -s /bin/ksh /bin/bash Then restarted the system normally. Unfortunately this didnt work since ksh is not compatible and /etc/rc.d/rc.sysinit uses several bash-specific tricks. Does anyone else have a suggestion on how I could get the system to boot normally without reinstalling bash?

  Read the article

• Is it possible to use objects as function paremeters in EL with JBoss EL resolver?

  - by calavera.info

  There is this sentence in JBoss EL resolver online documentation: It's important to fully understand how this extension to EL works. When the page is rendered, the parameter names are stored (for example, hotel.id and user.username), and evaluated (as value expressions) when the page is submitted. You can't pass objects as parameters! But I had used objects as function parameters in my project before I accidentally read this hint and it worked! How is it possible? I'm afraid of that there is some magic now...

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• Is there a certain IIS configuration required to allow a functioning .Net 4.0 ASP.Net MVC 2 Azure ap

  - by erg39

  I just installed the Azure 1.2 tools update and would like to get to work on an Azure project running locally using ASP.Net MVC and .Net 4, but I cannot get MVC pages to load. If I just create a new Azure project in VS 2010, add a ASP.Net MVC web role, and run the application, pages never load. It appears that routing is somehow at fault as controller actions never get called, but if I add other pages to the project (like .htm or .aspx) they will load in the browser. It all works fine with a new project using .Net 3.5, MVC 2 project in the Azure development environment; it all works fine with .Net 4.0 MVC 2 project that is not running in Azure; only the combination does not work. Environment is Win 7 x64 (IIS 7.5), VS 2010, Azure tools 1.2 Is there some magic IIS setting I need to change or something? Any ideas?

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >