Search Results

Search found 16914 results on 677 pages for 'single threaded'.

Page 167/677 | < Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >

• Wireless router setup for 1-1 NAT

  - by Carlos

  What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

  Read the article

• poor performance when deleteing many files

  - by choppy

  I've got two machines: The first is IBM Blade with 24 cores 96GB RAM and single local hard drive with 278GB divided to 4 partitions: 1. c: - 40GB; 3GB free 2. d: - 40GB; 37GB free 3. e: - 198322GB; 198.1 free 4. 100MB (EFI system Partition) Formatted with GPT The other is pizza server with 4 cores 8GB RAM and single local hard drive with 273GB divided to 3 partitions: 1. c: - 136.81; 20GB free 2. d: - 88.74GB; 87.91 free 3. e: - 47.85GB; 46.91 free Formatted with MBR I have two scripts, the first creates 20,000 files in one directory, each file size is 192KB, the second delete the folder (recursive) and prints how much time it toke to delete all files. The problem is on the first server (blade) it takes about 2 minutes to delete all 20,000 files while on the second (pizza) it takes about 4 seconds!? Both servers have clean windows server 2008R2 with no special application running on background. Any ideas what is going on?

  Read the article

• Any dangers in using DDR memory with a higher frequency than the FSB?

  - by raw_noob

  I'm looking to upgrade memory in an older motherboard. The processor is an AMD Sempron 2500+ with a maximum speed of 333/166MHz. The motherboard is an MSI MS-7061 (KV3M-V), which accepts up to 2Gb of DDR memory maximum PC2700 in 2 slots and has a maximum FSB of 333MHz. The board does not have dual-channel support. Existing memory includes a stick of 512Mb PC3200, which seems to be running OK (presumably at PC2700) but is rated 200MHz, which is below the FSB speed. The other stick is 256Mb PC2100/133MHz, again below the FSB speed. (All figures from CPU-Z.) I have a chance to acquire a single used stick of PC3200/400MHz memory very cheaply. Crucial's system scanner seems to suggest that this will be OK with my system, but other sites have suggested that running memory with a higher frequency than the FSB can cause instability. Is this true? Would I be better waiting until I can buy the correct PC2700/333MHz stick? I'm assuming that the mixed memory I have at present is running as 768Mb at 133MHz. Is this a reasonable assumption? If so, would you expect the performance differences between 768Mb/133MHz and 1Gb/333MHz to be very noticeable? If I install the new 1Gb/400 or 333MHz stick in slot 1, am I right in thinking that adding back the existing 512Mb/200MHz stick in slot 2 would pull the whole 1.5Gb system memory speed down to 200MHz? If so, which would be better - 1.5Gb/200MHz, or the single 1Gb stick at the full 333MHz that the FSB permits? Is more headroom more important than extra speed? Any help - or even opinions - gratefully received. I can't find reliable information, and I can't afford to make expensive mistakes.

  Read the article

• High speed network configuration

  - by Peter M

  Sorry if this seems to be a stupid question, I'm not sure how to specify what I want to know when checking google. I will have 2 or 3 devices pumping out data on a 100Base-T port. The combined data rate of all devices is about 15KB/S which exceeds the optimal 100Base-T channel capacity (12KB/S), but well within the realms of a 1000Base-T connection. Each device will be sending a burst of data in the form of an FTP transfer to a common, single host computer in a sequential manner ie: Device A establishes FTP connection and transfers data Device B establishes FTP connection and transfers data Device C establishes FTP connection and transfers data It may be that the A&B, B&C and C&A transfers overlap in the time domain to some extent. There will be minimal traffic going back from the computer to each device (in general what ever is needed to support the FTP transfers), and the network will be dedicated to transferring data between these devices and the host computer. Is it possible to use a switch to combine the multiple incoming 100Base-T streams into a single outgoing 1000Base-T stream? if so what features in a switch should I be looking for? Or would it be better to have 3 physical point-to-point 100Base-T dedicated connections between each device and the host computer? (thus having at least 3 physical Ethernet interfaces on that computer) Note that I can't change the interface on the devices, but I am free to choose the network and host computer configuration. Thanks for you help Peter

  Read the article

• Creating a bootable USB drive from a distro split over two DVD ISOs

  - by Kev

  I am searching and not finding the right way to do this. Please note, I don't think I'm trying for anything strange here. I just want to make a bootable USB stick of a single OS that happens to be larger than one DVD and happens to be larger than FAT32 will allow for in a single file. On our slow connection I spent a long time downloading CentOS 5.9's two DVD ISOs: CentOS-5.9-x86_64-bin-DVD-1of2.iso (4.4 GB) CentOS-5.9-x86_64-bin-DVD-2of2.iso (718 MB) I have a USB stick that I want to somehow get these two ISOs on. Since the first one is 4.4 GB, I can't use ISO2USB because it insists on FAT32. I cannot find an alternative that lets you specify more than one ISO image--of the same distro, I'm not trying for some fancy multi-boot thing--to put on the same stick. I guess I should have downloaded the CD ISOs, but I thought I was "saving time" because then I wouldn't have as many files to run through the md5 checker. There's no IMG file of the whole thing (only a net install version, which I don't want--I want to pre-download everything) otherwise I would've gone for that. So, given that I have these two DVD ISOs, how can I get them on a stick that will boot and make use of both of them properly to install CentOS somewhere? Again, I don't think this is anything out of the ordinary, yet I can't find software/docs that seem to support this. Am I stuck re-downloading everything in CD-sized ISOs just to do this? I found this, but it doesn't run on Windows. I am using Windows to prepare the stick.

  Read the article

• Copying files between linux machines with strong authentication but without encryption

  - by Zizzencs

  I'm looking for a suitable program to copy files from one linux machine to another one. The program should be able to do authentication but it should not do encryption. The reason behind the latter is the lack of CPU power to do the encryption. I copy backups from ~70 machines to a single backup server simultaneously. The single server is an HP Proliant DL360 G7, with 10 Gbps ethernet connection and an FC storage backend that can do 4 Gbps. Through FTP I can write ~400MB/sec to the storage (that's about what I want) but through ssh with arcfour I can only do ~100MB/sec while having 100% CPU usage. That's why I want file transfers not to be encrypted. The alternatives that I found not really suitable: rcp: no authentication, forget it FTP: making the authentication "secure" (at least preventing plain-text password exchange) is possible but not really easy and I haven't found a method to force any FTP daemon to encrypt the control channel (for the authentication) and not to encrypt the data channel (for data transfers) SCP/SFTP: in farely recent ssh(d) implementations you can't turn off encryption. The best you can do is to use the arcfour cypher for the encryption but it sill uses too much CPU power for my needs. rsync over ssh: same problems as with SCP/SFTP. plain rsync: from the documentation of rsyncd: "The authentication protocol used in rsync is a 128 bit MD4 based challenge response system. This is fairly weak protection, though (with at least one brute-force hash-finding algorithm publicly available), so if you want really top-quality security, then I recommend that you run rsync over ssh." It's a no-go. Is there a protocol/program that can do exactly what I want? (A big plus would be if it could work on windows as well and/or if it would support rsync-stlye copying/synchronization (e.g. copy only the differences).)

  Read the article

• Multiple servers vs 1 big server performace

  - by pistacchio

  Hi to all! My team of developers has suggested a server structure for an upcoming project we are developing. Our structure is "logical", meaning that the various logical components of the application (it is a distributed one) relies on different servers. Some components are more critical than others and will be subjected to more load. Our proposal was to have 1 server per component but the hardware guys suggested to replace the various machines with a single, bigger one with virtual servers. They're gonna use Blade Servers. Now, I'm not an expert at all, but my question to the guys was: so if we need, for example, 3 2GHz CPU / 2GB RAM machines and you give me 1 machine with 3 2GHz CPUs and 6 GB of RAM it is the same? They told me it is. Is this accurate? What are the advantages or disadvantages of both the solutions? What are the generally accepted best practices? Could you point out some URL reference dealing with the problem? Thank you in advance! EDIT: Some more info. The (internet / intranet) application is already layered. We have some servers on the DMZ that will expose pages to the internet and the databases are on their own machines. What we want to split (and they want to join) are some webservers that mainly expose webservices. One is a DAL that communicates with the database layer, one is our Single Sign On / User Profile application that gets called once per page and one is a clone of what seen on the Internet to be used on our lan.

  Read the article

• How can I create a simple Exchange 2010 backup solution?

  - by bduncanj

  I'm sure this question's been asked a dozen times in one form or another, however after much searching, there doesn't appear to be an obvious simple recovery solution for a single Exchange box. We're using Exchange 2010 on a single server, the server hosts the AD and nothing else on the network uses the AD. The intent is to run this server as you would an externally hosted Exchange server - access only via HTTP (RPC mode or OWA) - all other ports blocked. I've a daily backup running, using Windows Server 2008 volume shadow service to backup the Exchange data to an external hard disk. My question is, how do I perform a bare metal recovery of this server? 1) Do I need to be explicitly including the active directory information in this nightly backup, or will it be there by virtue of the fact that this system is the primary AD server and the Windows backup service knows this? 2) I understand I can re-install Server 2008 onto my new hardware (in the case of hardware failure) and then run Exchange 2010 setup.exe with a /recover argument, referencing the backup volume. 3) It is acceptable to have some downtime during this recovery process. But is there anything else I should be aware of? Thanks! Duncan

  Read the article

• Port knocking via SSH tunnels

  - by j0ker

  I have a server running in my university's internal network. There is only one SSH daemon running which is secured by port knocking with knockd. Works fine if I try to connect from within the internal network. But since the server has no external IP, I have to tunnel into the internal network every time I want to access the server from outside. And since tunneling only works for a single port I cannot do the port knocking as easily as from an internal client. In fact, I don't get it to work at all. What I'm trying is opening tunnels for all the different ports that have to be knocked. Then I send TCP-SYN packets into the tunnels. But that doesn't work even for a single port. If I establish the tunnel on the first port in the knock sequence and send a packet through it, it doesn't reach the server. There is no entry in the log file of knockd, while there should be something like 123.45.67.89: openSSH: Stage 1 (as shown with internal knocks). So I guess, the problem doesn't exist within my knocking script but is a more general one. Are there any known problems with what I'm trying to do? Is it even possible or am I missing something? Thanks in advance!

  Read the article

• PHP / SSH2 Multi-threading

  - by Asad Moeen

  I'm basically done using SSH2 with PHP. Some may already that while using it, the PHP code actually waits for all the listed commands to be executed in SSH and when everything is done, it then gives back the results. Where that is fine for the work I am doing, but I need some commands to be multi-threaded. $cmd= MyCommand; echo $ssh-exec($cmd); So I just want this to run in parallel 2 times. I googled some stuff but didn't get along with it. For a basic thing, I came across to this way posted by someone but it didn't work out for me. for ($i = 0; $i < 2; $i += 1) { exec("php test_1.php $i > test.txt &"); //this will execute test_1.php and will leave this process executing in the background and will go to next iteration of the loop immediately without waiting the completion of the script in the test_1.php , $i is passed as argument . } I tried to put it this way exec("echo $ssh-exec($cmd) $i test.txt &"); in the loop but either it never entered the loop or the echo $ssh-exec failed. I don't really need a very neat multi-threading. Even a single second delay would do good, thank you.

  Read the article

• a brand new FS based on a database without using fuse

  - by Devrim

  hi all, To serve millions of files out of a single directory, being able to connect to a drive from hundreds of endpoints, and for some other reasons (to avoid gluster/nfs/all fs based networking solutions), I want to evaluate the possibility of making a filesystem that's based on a mongodb (or any other). Basically, it works like fusefs, every single file is kept in mongo gridfs. In theory, I do, mount mongodbfs /mountPoint mongodb://localhost then when i say touch /mountPoint/test.txt this file is inserted into mongodb. This FS will also store uid/gid and perms with the file, we can throw hundreds of servers to it, and no useradd will be necessary. I'm not thinking to include all the features of FS, just the ones we need. My question is, how do I start my quest in finding resources, books, links, people, developers who'd help me implement this? at least a proof of concept. Is it feasible? What should I expect as a timeline for such undertaking? Please only think about gazillion small files and folders.

  Read the article

• CloudFront with Custom Origin and ELB

  - by kmfk

  We are using CloudFront for our static assets but also wanted to allow for Gzip. We set up a new distribution with a custom origin pointing back to our application servers which are behind a elastic load balancer. We manually keep the files in sync across the cluster and update them when we publish. However, with this set up, we get nothing but Miss and RefreshHits from CloudFront, which so far has defeated the purpose. Is there any additional settings in order to use an ELB as your custom origin? In the docs, it references this as a viable solution. It appears when we point the distribution to a single server in our production cluster, cloudfront properly caches our assets. Is it possible that the sticky sessions cookie and the subsequent header that gets added by it could be an issue? Cache-Control: no-cache="set-cookie" //Added by load balancer Any ideas? FYI - currently, we have our custom origin pointing to a single EC2 instance, so caching is working correctly - in case you try to curl the file below. Example headers: curl -I http://static.quick-cdn.com/css/9850999.css HTTP/1.0 200 OK Accept-Ranges: bytes Cache-Control: max-age=3700 Cache-Control: no-cache="set-cookie" Content-Length: 23038 Content-Type: text/css Date: Thu, 12 Apr 2012 23:03:52 GMT Last-Modified: Thu, 12 Apr 2012 23:00:14 GMT Server: Apache/2.2.17 (Ubuntu) Vary: Accept-Encoding X-Cache: RefreshHit from cloudfront X-Amz-Cf-Id: K_q7Zy3_jdzlEJ85ukELVtdx1GmuXqApAbZZ7G0fPt0mxRMqPKX5pQ==,RzJmPku-rEIO9WlvuSoKa8hiAaR3dLk5KC4cQMWWrf_MDhmjWe8n6A== Via: 1.0 28c34f9fbf559a21ee16594849e4fc9c.cloudfront.net (CloudFront) Connection: close

  Read the article

• Can't reliably ping 6224 router from directly-attached system

  - by David Mackintosh

  OK, here's my situation. This is on the internet. The 6224 is the router in this picture and physically resides in Kanata. Both VLAN 1697 and 3994 are provided by an internet service provider. These VLANs are provided through a single 1Gb ethernet wire. The Kanata hosts are directly attached to the 6224; the other two sites are remote. VLAN 3994 is a single IP address space, so theoretically it shouldn't matter physically where the hosts on that subnet are. Here's the problem. I have a monitoring system which is connected further into the internet, so probes from the monitor would come in to this diagram on the 1697 VLAN. When I ping hosts at Albert or Bells Corners from the internet, there is 0 loss. The connection looks perfect. When I ping hosts at Kanata, I lose anywhere from 10 to 40% of the pings. The loss is not predictable, but: when I do lose them, I always lose at least 3, usually 4, rarely more, pings in a bunch. I have attached a monitor directly to the 6224 in Kanata on 3994.. When the monitor pings the 6224 routing interface, I see exactly the same loss pattern -- but NOT at the same time as the loss from the remote system. Ping time is around 1ms. When the monitor pings another system directly attached to the 6224, there is 0 loss. Ping time is about 0.1ms, one-tenth of the time to ping the router. Anyone know what is going on here?

  Read the article

• sysbench memory test on ec2 small instance

  - by caribio

  I'm seeing a problem with sysbench memory test (the default version that's compiled in). This is on Ubuntu Maverick, sysbench installed via apt-get install sysbench. Running the same thing on Ubuntu @ Rackspace worked just as expected. While the CPU and I/O tests worked fine on EC2 servers, the memory test just runs without doing anything (notice the 0M in the test results). The instance used was the publicly available 'stock' Ubuntu image with no changes to it: ./ec2-run-instances ami-ccf405a5 --instance-type m1.small --region us-east-1 --key mykey Supplying more arguments (such as: --memory-block-size=1K --memory-total-size=102400M) didn't help. What am I doing wrong? Thanks. sysbench --num-threads=4 --test=memory run sysbench 0.4.12: multi-threaded system evaluation benchmark Running the test with following options: Number of threads: 4 Doing memory operations speed test Memory block size: 1K Memory transfer size: 0M Memory operations type: write Memory scope type: global Threads started! Done. Operations performed: 0 ( 0.00 ops/sec) 0.00 MB transferred (0.00 MB/sec) Test execution summary: total time: 0.0003s total number of events: 0 total time taken by event execution: 0.0000 per-request statistics: min: 18446744073709.55ms avg: 0.00ms max: 0.00ms Threads fairness: events (avg/stddev): 0.0000/0.00 execution time (avg/stddev): 0.0000/0.00

  Read the article

• Linux boot - stop the kernel switching to a new framebuffer mode clearing output

  - by Avio

  I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

  Read the article

• VPS Memory Exchausted Even With Light Settings

  - by user101570

  Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

  Read the article

• Faster, secure, protocol/code required for long-distance transfer.

  - by Chopper3

  I've ran into a problem and I'm looking for a new secure protocol/client/server that's faster over a 1Gb/s fibre link - let me tell you the story... I have a pair of redundant, diversely-routed, 1Gb/s links over a distance of around 250 miles or so (not dark fibre but a dedicated point to point link, not a mesh). At the 'client' end I have a HP DL380 G5 (2 x dual-core 2.66Ghz Xeon's, 4GB, Windows 2003EE 32-bit), at the 'server' end I have a HP BL460c G6 (2 x quad-core 2.53Ghz Xeons, 48GB, Oracle Linux 5.3 64-bit). I need to transfer around 500 x 2GB files per week from the client to the server machines per week - but the transfer NEEDS to be secure. Using both iPerf or regular FTP I can get ~80MB/s of transfer pretty consistently, which is great. Using WinSCP or Windows SFTP I can't seem to get more that ~3-4MB/s, at this point the server's CPU is 3% busy while CPU0 of the client goes to ~30% utilised. We've tried editing various TCP window sizes with little success. Both ends are connected to quite low-usage Cisco Cat6509's with Sup720's. I can replace the client machine with a newer machine and/or move it to Linux - but this will take time. Clearly these single-threaded secure Windows clients are introducing too much latency doing their encryption. So a few questions/thoughts; Are there any higher performing secure protocols or client software for Windows that I could try? I'm pretty protocol-gnostic so long as it'll work between Windows and Linux. Should I be using hardware to do the encryption, either in the client or the network parts? If so what would you recommend? I'm not convinced that just swapping the server would be that much faster, the CPU was only at 30% but then again that's higher than I'd have expected given the load - moving to Linux at the client end may be a better idea but would be quite disruptive. Am I missing a trick? Thanks in advance.

  Read the article

• ATI Firepro v4800 3 monitor support

  - by Jared275

  I have an interesting, yet very frustrating problem. I have two computers, both running win7 32 bit, and both with ATI Firepro V4800 graphics cards. Both are using the DVI port and two DP to DVI adapters to connect 3 monitors. One of them is able to display three desktops, while the other fails at enabling the third, displaying "cannot save changes" in display properties while requiring that one monitor must be disabled when making the change in CCC. I've verified that both computers have the same driver version and that both are using the same DP-DVI adapters. This articles suggests a few things to try, but none of its suggestions seem to work either. I'm kind of at my wits end, hence my posting here. If this is not an appropriate question for SU, I apologize. I admit that I am not very familiar with the differences between dual link and single link DVI, and that is something I have not verified is standardized between the two computers. Is that a possible reason one is working and the other isn't? How do I check if the DVI cable is a single link, or dual link?

  Read the article

• Disable touch pad for mouse button region on new HP pavillion models?

  - by John

  i bought a new hp pavillion dv6 series laptop. the laptop itself is fine but it has the new hp touchpad mouse which i absolutely hate. its such a stupid problem to have with a computer. the left and right mouse buttons are, themselves, part of of the touchpad, meaning that if i tap the buttons without actually pressing them down, it registers the same way as the mouse pad (the cursor moves, tap to click activates, etc.) this is a major annoyance because it prevents you from operating the mouse pad with anything more than a single finger; if for example i use my right hand index finger to move the cursor using the touch pad and rest my left hand index finger on the left mouse button for more efficient mouse-ing, the mouse will react as if im trying to use 2 fingers to move it and it will either just sit there or will spaz out. the only way this works is if i keep the finger that is resting on the mouse button absolutely still, which is very difficult and, therefore, very annoying. also, even if i do abide by the arbitrary new decree of single-finger mousepad operation, i still have a problem because when i press down on the left or right click buttons, the mouse moves slightly, what with the buttons also being part of the touch pad and all. this would not be that hard to avoid except that they decided to also make the buttons much harder to press down. now whenever i go to click something, i press hard on the mouse button, causing my finger to slightly move or roll or flatten out a bit, causing the cursor to move slightly, and causing me to click on something different. what i would like to know is if there is anyway that i can disable the touch pad on the buttons. i have gone through all of the settings under the synaptics menus but i cannot find anything about this. did i miss something in one of the menus? if not, then are there any updated drivers that allow for toggling of this function?

  Read the article

• Is there a utility to visualise / isolate and watch application calls

  - by MyStream

  Note: I'm not sure what to search for so guidance on that may be just as valuable as an answer. I'm looking for a way to visually compare activity of two applications (in this case a webserver with php communicating with the system or mysql or network devices, etc) such that I can compare the performance at a glance. I know there are tools to generate data dumps from benchmarks for apache and some available for php for tracing that you can dump and analyse but what I'm looking for is something that can report performance metrics visually from data on calls (what called what, how long did it take, how much memory did it consume, how can that be represented visually in a call stack) and present it graphically as if it were a topology or layered visual with different elements of system calls occupying different layers. A typical visual may consist of (e.g. using swim diagrams as just one analogy): Network (details here relevant to network diagnostics) | ^ back out v | Linux (details here related to firewall/routing diagnostics) ^ back to network | | V ^ back to system Apache (details here related to web request) | | ^ response to V | apache PHP (etc) PHP---------->other accesses to php files/resources----- | ^ v | MySQL (total time) MySQL | ^ V | Each call listed + time + tables hit/record returned My aim would be to be able to 'inspect' a request/range of requests over a period of time to see what constituted the activity at that point in time and trace it from beginning to end as a diagnostic tool. Is there any such work in this direction? I realise it would be intensive on the server, but the intention is to benchmark and analyse processes against each other for both educational and professional reasons and a visual aid is a great eye-opener compared to raw statistics or dozens of discrete activity vs time graphs. It's hard to show the full cycle. Any pointers welcome. Thanks! FROM COMMENTS: > XHProf in conjunction with other programs such as Perconna toolkit > (percona.com/doc/percona-toolkit/2.0/pt-pmp.html) for mySQL run apache > with httpd -X & (Single threaded debug mode and background) then > attach with strace -> kcache grind

  Read the article

• VMware Workstation Bridged Network Host UnReachable

  - by user2097818

  VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

  Read the article

• Trouble setting up incoming VPN in Microsoft SBS 2008 through a Cisco ASA 5505 appliance

  - by Nils

  I have replaced an aging firewall (custom setup using Linux) with a Cisco ASA 5505 appliance for our network. It's a very simple setup with around 10 workstations and a single Small Business Server 2008. Setting up incoming ports for SMTP, HTTPS, remote desktop etc. to the SBS went fine - they are working like they should. However, I have not succeeded in allowing incoming VPN connections. The clients trying to connect (running Windows 7) are stuck with the "Verifying username and password..." dialog before getting an error message 30 seconds later. We have a single external, static IP, so I cannot set up the VPN connection on another IP address. I have forwarded TCP port 1723 the same way as I did for SMTP and the others, by adding a static NAT route translating traffic from the SBS server on port 1723 to the outside interface. In addition, I set up an access rule allowing all GRE packets (src any, dst any). I have figured that I must somehow forward incoming GRE packets to the SBS server, but this is where I am stuck. I am using ADSM to configure the 5505 (not console). Any help is very much appreciated!

  Read the article

• Internet setup for my office

  - by prakash

  We have two internet connections to our office and our current setup is like this.. The internet connections require pppoe log in so i take each cable and plug it into a wifi router and configure the router to log in to the pppoe and then plug in a cable from the router to a switch and distribute the internet throughout my office. The problem with this setup is it is really hard to monitor and im not able to monitor who is hogging internet usage and what he or she is actually using it for. apart from this we also have a nas setup which is routed through another switch . Could someone please throw a little light on how i can restructure this setup for easy monitoring and better transparency... ? each wan router is connected to a different switch and is distributed to users accordingly.. we have around 40 users in the office.. we want to setup a single linux box to which i want to connect the two wan connections and from there distribute it to all our users.... im looking for a solution where we do not have to invest more that buying a single pc and a couple of nics

  Read the article

• How can I inject clips [ads] in a playlist every x minutes (even if previous clip is not over)

  - by azera

  Sorry for the title, I find it quite hard to describe what I want to do in a single sentence We have a few TV here linked to our computer, which we use to display clips about what we do in our sport center, what you should do to stay in good form ect ... It's running non stop, actually though vlc + playlist. Those main clips are 1-2 hours long and we have about 20 of them looping randomly all day. We would like to inject ads for some of our sponsiored products every now and then during the playlist, like say one ad every 15 minute. Does any one know how we can do that, while keeping the main clip random order ? I thought about encoding the whole thing as a single movie with ads inserted, but then it's not random. So we can put the ads in the playlist itself right ? Except clips are several hours long and we want that more often than that. Cutting the main clips in several pieces seems to work but that kind of sucks as new clips are made every month. If any one has an idea, thanks a lot

  Read the article

• Joomla performance problems on AWS

  - by Bobby Jack

  I'm running a site on AWS with the following setup: Single m1.small instance (web server) Single RDS m1.small db Joomla 1.5 Generally, the site is performant, but is fairly low-traffic - say around 50-100 visits / hour. However, at peak time, we see about double that traffic. During peak time, pretty much every day: CPU usage on the web server slowly climbs to 100% CPU usage on the RDS server climbs quite quickly to about 30%, from an average of about 15 Database connections shoot up to about 140, from a normal average of about 2 or 3 The site is then occasionally unreachable, certainly according to pingdom monitoring. Does anyone recognise this behaviour? Can you point me in the right direction to begin investigating? Of course, RDS makes it difficult to do things like slow query logging, so I've started by regularly dumping the mysql process list into a file to see if there's anything I can spot there, but it would be good to have something more concrete to investigate. UPDATE At least, can someone confirm that I'm definitely right in saying that the level of traffic implies the problem must be a specific type of query taking way longer than it should to execute? This would happen if a table gets locked, and many queries need to write to it, right? For this very reason, I've already changed the __session table type to InnoDB.

  Read the article

< Previous Page | 163 164 165 166 167 168 169 170 171 172 173 174  | Next Page >