Search Results

Search found 5712 results on 229 pages for 'card'.

Page 168/229 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Windows backups to VM Esxi

  - by Martyn

  I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Is there a way to adjust colors of a specific window?

  - by Synetech

  Is there a (Windows) program or something that will allow the user to adjust the brightness/contrast/gamma of a specific window rather than the whole screen? As a use-case scenario, imagine having a web-page showing on one half of the screen, and another program taking up the rest of the screen. This other program uses the default Windows colors (e.g., white background), so it may be glaringly bright. Alternately, the web-page may be too dark to see. Adjusting the monitor or video-card settings would affect everything which will be no good. Adjusting the default Windows colors is, at best, inconvenient. Instead, there needs to be a way to set the colors of one of the windows to equalize the whole screen.

  Read the article

• DVI monitor detected only on computer startup

  - by kamil

  I've recently connected a new monitor, LG M2252D-PZ, to a rather outdated computer with Windows XP and Radeon 9600. XP has SP3 installed, video drivers are the latest version back from the times the video card was still supported. My problem is that the monitor works fine only as long as I don't turn it off or switch it to a different input. When I turn it back on, it says "no signal". The key to the problem must be the DVI port, to which the new monitor is connected. The previous monitor was connected to the VGA output, and I've tested that the new one also works fine when connected to the analogue port. Apparently, the computer tests for the presence of a monitor on the DVI port only on startup. The question is, how do I change this?

  Read the article

• Audio Line-In on Ubuntu/Linux Mint

  - by hahuang65

  I'm currently on Windows, and want to switch to Linux, but some hardware issues are preventing me. Mainly, I have a sound card that supports Line-In. On Windows, anything I plug into the line-in gets outputted to the speakers. However, when I installed Linux, because there is not a control application that comes with the driver, I have no idea how to set this up. I tried going to the sound settings and it doesn't seem to be there. I also want to configure it for 2.1 sound, and do not know how to do that... Anyone here done it before? Thanks in advance for the help!

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• RCA monitor won't display highest resolution when NVidia drivers are installed

  - by novellterminator

  My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

  Read the article

• Pc not booting, no video output, hard drive noises

  - by bullettime

  My computer suddenly stopped booting up. I just came back from a week long trip, and it was working fine before I left. When I power up the computer now, it seems to power up just fine (leds on, fans working), but then there's no output on the screen at all, and there's a noise that seems to be coming from the HD, like it is trying to read something. After the noise starts, it does 6 cycles and then stops. I'm not sure but I don't think it did this noise when the pc was still working. I tried using the onboard video card instead but it made no difference. What could be wrong with my computer?

  Read the article

• Why am I having trouble loading Ubuntu alongside Windows as an application?

  - by STEVE PEAVEY

  I have two good CD ISO files. Both load OK, but when I boot to Ubuntu the screen is fragmented by dozens of white lines. Program works but is useless. I'm running Windows XP SP3 on D201GLY MB, CELERON CPU 220 1.02 GHZ, 512 RAM What could be my problem? CPU? Not enough RAM? Or maybe even the graphics card? to be clearer i am trying to load either ubuntu 8.04 or 9.04 inside windows as an aplication from known GOOD cd's. trying to load with the wubi installer that is loaded on the cd's. sis mirage graphics 32mb vid prosser sis 662.

  Read the article

• Can I run Ubuntu directly under Windows 8?

  - by huahsin68

  Text below is extract from the article, Windows 8 Tip: Virtualize with Hyper-V. Better still, Windows Virtual PC offered a feature called XP Mode, free for users of Windows 7 Professional, Enterprise, and Ultimate, which included a full working copy of Windows XP with Service Pack 3. But the big deal here is that as you installed applications in the virtual copy of XP, they would be made available through Windows 7’s Start Menu. And you could run these applications, side-by-side, with Windows 7 applications on the Windows 7 desktop. It was a seamless, integrated experience, ideal for those one-off application compatibility issues. I was thinking to install VirtualBox in Windows 8 and then run Ubuntu as guess OS. Since Hyper-V is a Type-0 hipervisor, may I know does this bring the same benefit if I have Ubuntu Linux install as a virtual guess OS? Meaning, if I turning the Ubuntu on (the guess OS), does the Ubuntu still able to access the hardware information like nVidia display card or processor information? I'm just curious to know can this be done?

  Read the article

• Which LAN driver should I use for Asus F5Z ?

  - by Radek

  A friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed successfully all drivers from Asus driver download site. Everything is working fine but the Ethernet driver. The installation of Lan Driver for Windows XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• HP Pavilion dv6 overheating, how do I set fan speed to 100% all the time?

  - by henpenben

  So I have a HP Pavilion dv6, and it works fine. But when I play, say, Minecraft, the temperature jumps to around 60c-70c. I wouldn't be bothered by this, but I bought this computer and played Minecraft on my lap. The laptop overheated and the video card melted. (I'm not kidding) So I was wondering how I could set the fan speed on my laptop to 100% all the time so it never overheats. HP has this "HP Coolsense" thing that when I pick up the laptop and wiggle it around a little bit and pretend it's unstable, the fan cranks up to 100%. I want 100% all the time without me having to pick up the laptop every 10 minutes. Thanks, henpenben

  Read the article

• Which motherboard for Intel i7 and how to get RAID working?

  - by jasondavis

  I am wanting to build a new PC, I have a couple questions. 1) I am wanting to go with the Intel Core i7 920 Processor, can anyone reccomend a good reliable motherboard for this processor? Graphics card support does not matter (sli-crossfire). I would like to support a lot of ram, so the more ram slots the better. I have read so many bad reviews about certain boards not working good, I would love recommendation from experience. 2) I am wanting to run a couple SSD drives in RAID-0, I have never done this, will I need to purchase anything additional to the MB and CPU and drives to get raid working?

  Read the article

• Problems with connecting to wireless network on windows 7

  - by Naveen

  I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

  Read the article

• Why does my ethernet connection keep re-connecting, only with Windows?

  - by Nick Bolton

  I'm using Windows 7, and I have several computers on my network. For some reason, the network connection keeps disconnecting and immediately re-connecting. Infact, it may just be refreshing the DHCP lease... but I'm not sure. I've tried changing the network card, and ethernet cable, but the issue is still happening. I can only imagine that the issue is with the ethernet switch, but this doesn't happen on my other desktop which uses the same ethernet switch. Any ideas?

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• Copying large file from SD to HDD via USB failing on Ubuntu

  - by Kent Boogaart

  Hi, I'm attempting to copy some large files from my camera (Canon EOS 500D) to my laptop, which is running 64 bit Ubuntu 9.04. I am using USB to connect the two devices. For most files, it is simply a matter of control-C and control-V. I have done this successfully many times with both photos and small movies (eg. 180MB). However, when I attempt to do this with very large files (eg. 3GB), the copy seems to start with a lot of activity both on the camera and laptop, but after 10 minutes or so the camera is automatically unmounted and the copy fails to complete. I have read that this might be due to the device not mounting as a mass storage device, but I cannot see any obvious way for me to change this behavior. Can anyone offer any direction here? I'll get a USB card reader if necessary, but I'd prefer to be able to just plug my camera in. Thanks

  Read the article

• Is there a fix for an iMac G5 annoying screen pattern issue?

  - by smountcastle

  It's probably a hardware issue, but I was hoping that someone might know of other options to try. My iMac G5 (the revision just before the built-in iSight was introduced) has developed an annoying pattern of short/wide rectangles in a pinkish hue across the screen. I've followed Apple's instructions to ensure that the logic board hasn't failed (by resetting the SMU and watching the internal LEDs light-up). I suspect either the LCD or video card has failed. Below are two screen shots, one taken by my iPhone which exhibits the problem and a snapshot taking from the faulty iMac which looks fine.

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Asus V1S screen dimming randomly

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. My guess means the inverter cable is damaged, based on previous experience. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• Register a domain with NIC

  - by tandu

  I recently bought a .es domain for the purpose of creating a domain hack. I registered the domain with esreg.com (SANE Systems, apparently). My card was charged, but the domain is listed as not registered. I have not yet been able to get in contact with them. Their website seems to have a small form to register the site and to specify the nameservers, but when I fill it out it says "You have to specify the NIC handles first." I don't know how to get those. They have for example a box that says "Owner" with an example of SK86-ESNIC-F4. I have another website so I may have this information, but I don't know how to get it.

  Read the article

• an issue with VMWare Workstation 10 and three monitors

  - by whtvr

  I'm having a bit of a problem with using three monitors with VMWare Workstation 10. When only two monitors are enabled in the system I have an option to "Cycle Multiple Monitors", available from the View menu (in full screen). When I enable the third monitor that option is no longer in the menu and I can only use one monitor at a time. I've found this article and a "Choose a Monitor Layout" button is mentioned there but I'm unable to see it anywhere. I'm using Windows 8.1 as the host and Ubuntu 14.04 as the guest. The graphics card is AMD Radeon R9 290x with latest beta drivers

  Read the article

• Zentyal Server : Setting up secure VPN Client

  - by JustShrey

  I have officially exhausted pretty much all my google-fu trying to set this up so I'm asking my question here. For the record, I am a mid level rookie who has played around with servers in his spare time but have never worked with Zentyal Server. Now, I have been able to set up the server as a gateway, with one Network card being external and the other facing the internal Network. The Internal network computers are able to access the internet without any issues. What I need to do is to setup a open-vpn client on the central server so that all Internet data goes though the secure VPN session. As far as I can see, I can't set up the vpn session through the web admin page. Could somebody point me in the right direction? How would I go about doing this? Regards Shreyas

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >