Search Results

Search found 8215 results on 329 pages for 'high ball'.

Page 168/329 | < Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >

• Sound stopped working on Toshiba Satelite C855

  - by Eric Wilson

  I have a Toshiba Satallite C855 running Windows 7 with a Realtek High Definition Audio card. Sound worked fine yesterday. Today, my two-year old did something to the machine, and I have no sound. I have adjusted sound through the icon in the lower right corner, and using the Fn keys. I have rebooted. I've verified that there are no external speakers plugged in to the laptop. It seems that this model does not have an external volume control. (If it does I can't find it.) Any ideas?

  Read the article

• My server is running out of memory, despite having all swap free

  - by Biohazard

  I am using Debian 6 (Squeeze). The server has 4gb of memory in it, and 8gb of swap. I'm starting to get memory alloc errors at high application load times, but from top command: Mem: 4055944k total, 3915436k used, 140508k free, 10444k buffers Swap: 7999480k total, 0k used, 7999480k free, 3604496k cached The system isn't even trying to use the swap? Why would this be happening? I would like to upgrade the primary memory, but this isn't possible just right now. Thanks.

  Read the article

• How can I make WinXP bind to ports other than 1025-5000 for outgoing TCP connections?

  - by Chris Dolan

  (I originally posted a similar question on StackOverflow but readers recommended I post here instead) When you create outgoing TCP connections, most applications let the operating system choose which port to use. Most OSes use the IANA recommended dynamic port range of 49152-65535 for this purpose. But in Windows 2003 and earlier (including XP) Microsoft uses ports 1025-5000. Microsoft lets you change the high end of this range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. I need to have port 4160 free for incoming connections and on rare occasions an outgoing connection steals that port from me before I bind that port.

  Read the article

• How to extract corrupted RAR files

  - by Anyname Donotcare

  I try to extract a file from set of .RAR parts. I always get the following error: Corrupted so I tried many programs to extract the corrupted RAR files. I have 10 parts, each one 400MB big. The last progam I used was Recovery toolbox for RAR. It gave me the following message: Severity:!High Message:Recovery error for file XXXX with message set file pointer error. The program extracted 2GB of data, but it should extract 4GB. Is there any way to extract the content or am I supposed to download the files again from another server?

  Read the article

• openQRM nagios password reset

  - by Entity_Razer

  Right so, basically the story is that to test a XenServer environment from citrix I deployed a openQRM install from SVN to a ubuntu 10.4 install (on a ESX Environment) All went well installs, I can connect to it, but I can't seem to access the nagios plug in. Every time i wish to go to it i'm asked for a pw, and if I input the pw I wrote down yesterday it just doesn't let me in. I'm trying to reset the password on the nagios plug in now but for the life of me can't find it. Googled high and low for a defenitive working solution but so far no luck. Anyone able to lend a hand ? Cheers ! Ubuntu 10.4 Beta as openQRM openQRM installed from SVN cheers

  Read the article

• vCenter Server: This host currently has no management network redundancy

  - by goober

  Background I'm on a new VMWare install consisting of: 1 vCenter Server (containing inventory service, SSO, vCenter server, and web client server) 2 ESX Servers configured in a HA group Problem When a I view the summary for any one of my servers, I receive a notice: "" This is expected in our scenario and we're okay with it. Attempted Solutions As I understand from this article and this discussion, the proper way to remove the error message is to ignore it via setting the "das.ignoreRedundantNetWarning" propery to "true". I took the following steps: Logged into vCenter Right-clicked on my HA cluster and chose "Edit Settings..." Clicked "vSphere HA" section Clicked "Advanced Options..." Added the "das.ignoreRedundantNetWarning" option with a value of "true". Question How do I get this error to go away, and are there any reasons why adding this option may not have worked? References Network redundancy message when configuring VMware High Availability in vCenter Server [VMWare KnowledgeBase] How remove a notice " has no management network redundant" [VMWare Community]

  Read the article

• how can I effect DNS Caching on PHP/Memcache application

  - by Niro

  In a very high loaded Ubuntu/PHP web server I found that the PHP line: $memcache-connect("int-aws_ec2.memcached.myapp.net",11211); sometimes takes ~5 secs. Replacing the url with the ip address decreases the server load from ~20 to 0 My question is - where are the settings that effect the DNS caching for this? Is it in the server level or the memcache library ? How can I change it ? Additional info: Ubuntu 10.04 lucid PHP: 5.3.2-1ubuntu4.10 Apache/2.2.14 (Ubuntu) Amazon EC2 Even more info per Celada's comment: The DNS handling for the memcache server is done by scalr (the platform I use to manage the cloud resources). They have a client located on the instances and their own DNS servers. /etc/nsswitch.conf - hosts: files dns /etc/resolv.conf: nameserver 172.16.0.23 domain ec2.internal search ec2.internal The domain is not in hosts.conf To check if I run nscd I used /etc/init.d/nscd stop and received 'no such file' so i guess I dont run nscd. Thanks !

  Read the article

• Unable to mount portable hard drive on Ubuntu

  - by VoY

  My portable hard drive (WD My Passport), which used to work correctly now does not automount on my Ubuntu system. It does work on a Windows machine or even when plugged into WD HD TV, which is a Linux based device. There's one NTFS partition spanning the whole drive. When I plug the disk in, I see the following in dmesg: [269259.504631] usb 1-2.2: new high speed USB device using ehci_hcd and address 20 [269259.604674] usb 1-2.2: configuration #1 chosen from 1 choice However it does not mount in GNOME and I don't see it when I type: sudo fdisk -l Any suggestions why this might be? I repaired the partition using chkdsk on Windows, so the issue is probably not filesystem related.

  Read the article

• how to lower CPU usage for Ableton Live 8 in Mac OSX 10.6.8

  - by Travis Dtfsu Crum

  While running Ableton Live 8 after a project gets to a certain size, the audio starts to get a bit choppy and distorted. My levels are fine and is not the cause of the lag and chop. I have samples set to 1024 and the high quality button selected which I need to hear the sound. I always lower these when I'm recording audio with my mic but I need to have these turned up to be able to mix master the song. Anything I can do to lower the CPU usage? It sucks because I can't even use my iZotope Ozone plug-ins because of their CPU usage and they are AMAZING plug-ins that I would love to use.

  Read the article

• Why does a website server recieve local files much slower than recieve files on other websites?

  - by T...

  The server at http://any2djvu.djvuzone.org receives same files from local computers much slower than from links on other websites (with the same files have been uploaded to the other websites, such as dropbox.com). The speed of uploading a file from local computers to other websites such as dropbox is also much faster than to any2djvu website. For example, a pdf file of 17MB needs more than 1 min to be uploaded to any2djvu server from a local computer with normal ISP such as Comcast High-speed internet, but takes less than 3 seconds from a dropbox link to any2djvu server, and takes around 10 seconds from the same local computer to dropbox. I wonder why there is such big differences for the speeds of different uploading ways to a web server? Thanks!

  Read the article

• In Varnish stats, what does "Backend conn. reuses" and "recycles" mean?

  - by electblake

  I have varnish installed and I think it's working properly (not sure if it matters but I am using iptables reroute method to route ports incoming:80 > varnish:8080 > apache:80 Anyway, In varnishstat I see a pretty high Hitrate average (60-80%) which I am working on but I am unclear at what all of the stats presented by varnishstat Specifically the following Backend stats: 380 0.00 0.26 Backend conn. success 10122 15.00 6.85 Backend conn. reuses 267 0.00 0.18 Backend conn. was closed 10391 15.00 7.04 Backend conn. recycles I've read a blog post called "Varnishstat for dummies" which outlines a lot of details of varnishstat (I recommend it for beginners) but it does not go over these Backend stats. Feel free to explain here or link to a resource I've missed :) thanks!

  Read the article

• Considerations for a business looking to transition from PSTN to IP Telephony

  - by Bryce Thomas

  Full disclosure - This is related to a homework assignment question. I am not asking you to do my work for me, I am merely looking for some pointers and considerations to direct me in my further research. I have an assignment I'm working on where I've been given a scenario where a business wants to look into transitioning to using "Internet Telephone" as opposed to a traditional PSTN/PBX system and I need to write a report on it. I'm after some high level pointers from people, especially anyone that has been involved in a real life transition of this nature, on what some of the most important considerations are. These can be financial considerations, initial setup considerations, ongoing administrative considerations, quality of service considerations or anything else that is pertinent to performing such a transition.

  Read the article

• Short USB cables not charging?

  - by tropolite

  I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• Looking for a software to keep track of backup media

  - by Tarnschaf

  Hi, I am looking for a software that allows me to enter my used backup media (e.g. DVD1, DVD2) my backed-up assets in high-level (such as "family-photos from 2003", "laptop drivers") details of the assets ("Ninas Birthday 2003") where the backup media is currently stored when the media has been burned (to re-burn in case of media degeneration) Of course it should be possible to navigate from media to assets and backwards. I also thought about marking assets as "deprecated". If all assets on a media are deprecated, the program should tell me so I don't have to keep it any more. Does anybody know a program with this feature-set or will I have to start my own in say Access?

  Read the article

• Windows Server - Dual NIC Bandwidth Pooling

  - by tsilb

  I have a Windows Server 2008 machine with dual NICs. Both are plugged into the same switch in a typical one-switch, one-gateway home network. This server is used almost exclusively for inbound connections. It hosts a web server (IIS 6), SQL server, and file server (via LAN UNC paths and mapped drives). How do I make best use of inbound bandwidth across both NICs? For example, if I connect to it by hostname and one of the interfaces has high traffic, I'd like the new connection to use the other interface.

  Read the article

• Co-location vs. cloud hosting

  - by RainyRat

  We have a decent-sized server estate: several ProLiants, plus IBM BladeCentre and SANs running a VMWare environment. Due to an imminent premises move, we're not going to have enough space for a server room, so I've been looking at moving everything out to a colo. My boss is more keen on the idea of cloud-hosting everything, which would include a couple of high-traffic websites (about 9m pageviews/month), our Exchange sever (about a million clean emails sent/received monthly), as well as file/print/AD/all the ususal stuff. This doesn;t sound like a good idea to me, but I'm new to the ways of the cloud. Can anyone offer any advice?

  Read the article

• How to record my voice on a Mac Mini with headphones?

  - by user718408

  I'm try to record my voice via the headphone on a Mac Mini, but it's not working. I saw on Apple's site that the Mac Mini can record voice, but it doesn't seem to be working for me. Here is a hardware overview: Model Name: Mac Mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.26 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Audio: Make: Intel High Definition Audio Audio ID: 65 Headphone connection: Combination Output Line Input connection: Combination Input Speaker connection: Internal S/PDIF Optical Digital Audio Output connection: Combination Output S/PDIF Optical Digital Audio Input connection: Combination Input Any ideas how I can successfully get recording working?

  Read the article

• How to install audio drivers for Acer Revo nettop?

  - by CT

  I have a Acer Revo nettop. I wiped the XP Home install that came on the machine and put XP Pro on. Acer's support website would lead you to believe that this product does not exist. I know it has a NVIDIA ION LE chipset so I headed over to nvidia.com to download drivers. Ive downloaded and installed the Chipset drivers, Graphics Drivers, and HDMI audio drivers. I have no sound. Under Device Manager there is an unknown Audio Device on High Definition Audio Bus. I do not have an HDMI cable to test hdmi audio. I would just like the standard audio mini-jack output to work. Anyone know of the correct driver or a generic driver that would work? Thanks

  Read the article

• XPP-32 over W7-64 on music production laptop

  - by quarlo

  I need to upgrade my laptop and need high performance for music production (recording and mixing). My audio interface manufacturer seems to be unable to successfully convert their drivers to 64-bit. I do not trust a virtual machine to handle real-time audio recording at low enough latency so ... I would like to install XP Pro 32-bit on a separate partition and dual boot since most of the machines that can handle this application now ship with Windows 7 64-bit flavors. I'd like to transit to 64-bit over time assuming M-Audio does eventually get a handle on 64-bit drivers, but really need to ensure that I can stay at 32-bit for now. Does anyone have any experience with this or something similar?

  Read the article

• Kerio group calendaring private/public functionality

  - by bsigrist

  We are considering a change of email servers and Kerio Connect is attractive. However, I am concerned about calendaring functionality. I found an old forum post that states the question well: "We want to create a single public calendar that everyone can see - using Windows XP/Outlook 2003/KOC 6.4.1. We want a way for people to put an entry in their own personal calendar and some how mark it so the entry auto add's or syncs with the public one. If an entry is private it wouldn't sync to the shared public calendar... Has anyone ever heard of a way to do this - in any way with any software?" This is a high priority feature, so if Kerio cannot do this, we may consider Exchange. Does Exchange provide functionality like that described?

  Read the article

• How to set expiration date for external files? [closed]

  - by garconcn

  I have a site included lots of external files, most of them are gif format. I have no control on the external files, but have to use them(with permission). When I check the site using Google Pagespeed, I got very low score(31) even though the page load is fast. One of the high priority suggestion is to leverage browser caching by setting an expiration date. However, all the files are on external links. I have already set the expiration date for local files.

  Read the article

• serving static assets via http is really slow compared to sshfs (apache2/nginx)

  - by s1lv3r

  After migrating to a new VPS I had some users complaining about slow loading images on their sites. After creating some test files with dd I realized that I can download all files via sshfs with full speed while downloads via web are painfully slow. The larger the file is and the longer the transfer takes, the slower the transfer speed gets. I thought I had some problems with Apache and just spend the whole evening with replacing Apache2 against nginx for static file serving - with no effect at all. No I/O wait states in top. Tons of RAM free, no high CPU utilization and hdparm shows a decent I/O performance at all times. I just have no idea anymore, what's happening on this server. This is a link to a demo file: http://master.dealux.de/file.tgz Anybody an idea what I can check out?

  Read the article

• What happens when Oracle's Enterprise Single-Sign-On database goes down? [migrated]

  - by Unai

  We're working on setting up Oracle's Enterprise Single-Sign-On with High Availability. At the moment every component provides HA except our database backend (i.e. we have just one instance). While conducting some kick-the-plug tests we learnt that the ESSO system works even with the database turned OFF. This was a nice surprise but now we need to understand what are the implications of a database failure; sure the sessions might be handled on the application servers and the policies might have been cached but... for how long? how big is this cache? what is the role of the database? I would appreciate if anyone shares her/his experience and/or points out to documentation that covers this. Thank you so much.

  Read the article

• NTFS write speed really slow (<15MB/s) on Ubuntu

  - by Zulakis

  When copying large files or testing writespeed with dd, the max writespeed I can get is about 12-15MB/s on drives using the NTFS filesystem. I tested multiple drives (all connected using SATA) which all got writespeeds of 100MB/s+ on Windows or when formatted with ext4, so it's not an alignment or drive issue. top shows high cpu usage for the mount.ntfs process. AMD dual core processor (2.2 GHz) Kernel version: 3.5.0-23-generic Ubuntu 12.04 ntfs-3g version: both 2012.1.15AR.1 (Ubuntu default version) and 2013.1.13AR.2 How can I fix the writespeed?

  Read the article

< Previous Page | 164 165 166 167 168 169 170 171 172 173 174 175  | Next Page >